NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual
Appendix A
Technical Specifications
Default Configuration Settings
This appendix provides factory default settings and technical specifications for the RangeMax
Dual Band Wireless-N Router WNDR3300.
Table A-1. WNDR3300 Router Default Configuration Settings
Feature
Default Setting
Router Login
Router Login URL
http://www.routerlogin.net or
http://www.routerlogin.com
Login Name (case-sensitive) printed on
product label
admin
Login Password (case-sensitive) printed
on product label
password
Internet Connection
MAC Address
Use default hardware address
MTU Size
1500
Local Network
Router LAN IP address printed on
192.168.1.1
product label (also known as gateway IP
address)
Router Subnet
255.255.255.0
DHCP Server
Enabled
DHCP range
192.168.1.2 to 192.168.1.254
Time Zone
Pacific Time
Time Zone Adjusted for Daylight Saving
Time
Disabled
Allow a Registrar to configure this router
Enabled
Technical Specifications
A-1
v1.0, February 2008
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual
Table A-1. WNDR3300 Router Default Configuration Settings (continued)
Feature
Default Setting
Wireless
Wireless Communication
Enabled
SSID Name
• 11N SSID: NETGEAR-DualBand-N
• 11G SSID: NETGEAR-2.4-G
Security
Disabled
Broadcast SSID
Enabled
Transmission Speed
Autoa
Country/Region
United States in the US, otherwise varies by region
RF Channel
6 until region selected
Operating Mode
• Mode 1. 802.11n 2.4G mode
• Mode 2. 802.11n 5G mode and 802.11g legacy
mode at 2.4G
Data Rate
Best
Output Power
Full
Firewall
Inbound (communications coming in from Disabled (bars all unsolicited requests)
the Internet)
Outbound (communications going out to
the Internet)
Enabled (all)
a. Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput will vary. Network
conditions and environmental factors, including volume of network traffic, building materials and construction, and
network overhead, lower actual data throughput rate.
Network Protocol and Standards Compatibility
Data and Routing Protocols
TCP/IP, RIP-1, RIP-2, DHCP, PPPoE, PPTP,
Bigpond, Dynamic DNS, and UPnP
A-2
Technical Specifications
v1.0, February 2008
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual
Table A-1. WNDR3300 Router Default Configuration Settings (continued)
Feature
Default Setting
Power Adapter
North America
120V, 60 Hz, input
United Kingdom, Australia
240V, 50 Hz, input
Europe
230V, 50 Hz, input
Japan
100V, 50/60 Hz, input
All regions (output)
12V DC @ 1.5A output, 18W maximum
Physical Specifications
Dimensions
1.1" x 6.89" x 4.68"
28 x 175 x 119 mm
Weight
1.2 lbs.
0.5 kg
Environmental Specifications
Operating temperature
0° to 40° C
(32º to 104º F)
Operating humidity
90% maximum relative humidity, noncondensing
Electromagnetic Emissions
Meets requirements of
FCC Part 15 Class B
VCCI Class B
EN 55 022 (CISPR 22), Class B
C-Tick N10947
Technical Specifications
A-3
v1.0, February 2008
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual
Table A-1. WNDR3300 Router Default Configuration Settings (continued)
Feature
Default Setting
Interface Specifications
LAN
10BASE-T or 100BASE-Tx, RJ-45
WAN
10BASE-T or 100BASE-Tx, RJ-45
Wireless
Maximum wireless signal rate complies with the IEEE
802.11 standard. Actual throughput will vary. Network
conditions and environmental factors, including
volume of network traffic, building materials and
construction, and network overhead, lower actual
data throughput rate.
Radio Data Rates
Auto Rate Sensing
Frequency
2.4 GHz and 5 GHz
Data Encoding
Standards
IEEE 802.11n draft version 1.0
IEEE 802.11n, IEEE 802.11g, IEEE 802.11b 2.4 GHz
IEEE 802.11n, IEEE 802.11g 5.0 GHz
Maximum Computers Per Wireless
Network
Limited by the amount of wireless network traffic
generated by each node. Typically 30–70 nodes.
Operating Frequency Ranges 2.4G Ghz
2.412–2.462 GHz (US)
2.412–2.472 GHz (Japan)
2.412–2.472 GHz (Europe ETSI)
Operating Frequency Ranges 5G Ghz
5.18–5.24 + 5.745–5.825 GHz (US)
5.18–5.24 GHz (Europe ETSI)
802.11 Security
40-bit (also called 64-bit) and 128-bit WEP,
WPA-PSK, and WPA2-PSK.
Restoring the Default User Name and Password
You can restore the factory default configuration settings to reset the router’s user name to admin,
the password to password, and the IP address to www.routerlogin.net. This procedure erases
your current configuration, including your wireless security settings, and restores the factory
defaults. When you log in after resetting, the Smart Wizard configuration assistant prompts you to
configure these settings.
A-4
Technical Specifications
v1.0, February 2008
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual
To restore the factory default configuration settings:
1. Use a sharp object such as a pen or a paper clip to press and hold the restore factory settings
button, located on the rear panel of the router, for about 20 seconds.
2. Release the restore factory settings button, and wait for the router to reboot.
The factory default settings are restored so that you can access the router from your Web
browser using the factory defaults.
Technical Specifications
A-5
v1.0, February 2008
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual
A-6
Technical Specifications
v1.0, February 2008
">
