HP 1910 Switch Series
QuickSpecs
HP 1910 Switch Series
Overview
Models
HP 1910-48G Switch
HP 1910-24G-PoE (365 W) Switch
HP 1910-24G-PoE (170 W) Switch
HP 1910-24G Switch
HP 1910-16G Switch
HP 1910-8G Switch
HP 1910-8G-PoE+ (65W) Switch
HP 1910-8G-PoE+ (180W) Switch
JE009A
JE007A
JE008A
JE006A
JE005A
JG348A
JG349A
JG350A
Key features
Customized operation using intuitive Web interface
Layer 3 static routing with 32 routes
Access control lists
Spanning Tree: STP, RSTP, and MSTP
Lifetime warranty
Product overview
HP 1910 switches are advanced smart managed fixed-configuration Gigabit Ethernet lite Layer 3 switches designed for
small businesses looking for key enhanced features in an easy-to-administer solution. The series has eight models: 8-, 16-,
24-, and 48-port 10/100/1000 non-PoE models; and two 8-port and two 24-port 10/100/1000 PoE models. All switches have
additional true Gigabit SFP ports for fiber connectivity. HP 1910 models support rack mounting or desktop operation and use
variable-speed fans for quiet operation. The HP 1910 switches operate at full wire-speed IPv6, supporting QoS traffic
prioritization and security features such as 802.1X network login, access control lists, and denial-of-service prevention.
Customizable features include VLANs and link aggregation trunking, as well as advanced features such as Layer 3 static
routing and Spanning Tree Protocols (STP, RSTP, and MSTP). The HP 1910 switches come with a lifetime warranty
covering the unit, fans, and power supplies.
Features and benefits
Quality of Service (QoS)
Broadcast control: allows limitation of broadcast traffic rate to cut down on unwanted network broadcast traffic
Rate limiting: sets per-port ingress enforced maximums and per-port, per-queue guaranteed minimums
Traffic prioritization: provides time-sensitive packets with priority based on DSCP or IEEE 802.1p classification;
packets are mapped to four hardware queues for more effective throughput
Management
Simple Web management: intuitive Web GUI (http/https) allows for easy management of device by even
nontechnical users
Single IP management: enables management of up to 32 HP 1910 devices using a single Web interface; simplifies
management of multiple devices
Secure Web GUI: provides a secure, easy-to-use graphical interface for configuring the module via HTTPS
SNMPv1, v2c, and v3: devices can be discovered and monitored from an SNMP management station
Complete session logging: provides detailed information for problem identification and resolution
Dual flash images: provide independent primary and secondary operating system files for backup while upgrading
DA - 13677 Worldwide QuickSpecs — Version 7 — 5/14/2012
Page 1
QuickSpecs
HP 1910 Switch Series
Overview
Port mirroring: enables traffic on a port to be simultaneously sent to a network analyzer for monitoring
Management security: multiple privilege levels with password protection restrict access to critical configuration
commands; ACLs provide telnet and SNMP access; local and remote syslog capabilities allow logging of all access
Network Time Protocol (NTP): synchronizes timekeeping among distributed time servers and clients; keeps
consistent timekeeping among all clock-dependent devices within the network so that the devices can provide diverse
applications based on the consistent time
IEEE 802.1AB Link Layer Discovery Protocol (LLDP): automated device discovery protocol provides easy mapping
of network management applications
DHCP options: client allows automatic setting of IP address
Limited CLI: enables users to quickly deploy and troubleshoot devices in the network
RMON: provides advanced monitoring and reporting capabilities for statistics, history, alarms, and events
Connectivity
Auto-MDI/MDIX: automatically adjusts for straight-through or crossover cables on all 10/100/1000 ports
Non-shared SFP ports: four true SFP mini-GBIC ports provide optional fiber connectivity such as Gigabit-SX and -LX;
also supports SFP 1G RJ-45 copper connections
IEEE 802.3X flow control: provides a flow throttling mechanism propagated through the network to prevent packet
loss at a congested node
IEEE 802.3af Power over Ethernet (PoE) ready: PWR models can provide up to 15.4 W per port to power
standards-compliant IP phones, wireless LAN access points, Web cameras, and more
Packet storm protection: protects against broadcast, multicast, or unicast storms with user-defined thresholds
Cable diagnostics: remotely detect cable issues using a browser-based tool
IPv6:
IPv6 host: enables switches to be managed and deployed at the IPv6 network's edge
IPv6 static routes:
MLD snooping: forwards IPv6 multicast traffic to the appropriate interface, preventing traffic flooding
IPv6 ACL/QoS: supports ACL and QoS for IPv6 network traffic
Performance
Half-/Full-duplex auto-negotiating capability on every port: doubles the throughput of every port
Selectable queue configurations: allow you to increase performance by selecting the number of queues and
associated memory buffering that best meet the requirements of your network applications
IGMP snooping: multicast filtering improves network performance, instead of flooding traffic to all ports
Fiber uplink: provides greater distance connectivity using Gigabit fiber uplinks
Resiliency and high availability
Redundant power supply (365 W power model only): RPS power supply provides additional PoE of up to 740 W for
high power applications like Gigabit Ethernet IntelliJack switches; the HP RPS 1600 Power Supply (JG136A) is sold
separately
Link aggregation: groups together multiple ports (up to a maximum of 2 ports) automatically using Link Aggregation
Control Protocol (LACP), or manually, to form an ultra-high-bandwidth connection to the network backbone; helps
prevent traffic bottleneck
Layer 2 switching
VLAN support and tagging: supports IEEE 802.1Q (4,094 VLAN IDs) and 256 VLANs simultaneously
Spanning Tree: fully supports standard IEEE 802.1D Spanning Tree Protocol, IEEE 802.1w Rapid Spanning Tree
Protocol for faster convergence, and IEEE 802.1s Multiple Spanning Tree Protocol
BPDU filtering: drops BPDU packets when STP is enabled globally but disabled on a specific port
Jumbo Frame Support: supports up to 10 kilobyte frame size to improve the performance of large data transfers
Layer 3 services
DA - 13677 Worldwide QuickSpecs — Version 7 — 5/14/2012
Page 2
QuickSpecs
HP 1910 Switch Series
Overview
Address Resolution Protocol (ARP): determines the MAC address of another IP host in the same subnet; supports
static ARPs; gratuitous ARP allows detection of duplicate IP addresses; proxy ARP allows normal ARP operation
between subnets or when subnets are separated by a Layer 2 network
DHCP relay: simplifies management of DHCP addresses in networks with multiple subnets
Layer 3 routing
NEW Static IPv4/IPv6 routing: provides basic routing (supporting up to 32 static routes and 8 virtual VLAN
interfaces); allows manual configuration of routing
Security
Advanced access control lists (ACLs): MAC and IP-based ACLs enable network traffic filtering and enhance
network control; time-based ACLs allow for greater flexibility with managing network access
Secure Sockets Layer (SSL): encrypts all HTTP traffic, allowing secure access to the browser-based management
GUI in the switch
IEEE 802.1X and RADIUS network logins: control port-based access for authentication and accountability
Automatic VLAN assignment: automatically assigns users to the appropriate VLAN based on their identity and
location and the time of day
STP BPDU port protection: blocks Bridge Protocol Data Units (BPDUs) on ports that do not require BPDUs,
preventing forged BPDU attacks
STP Root Guard: protects the root bridge from malicious attacks or configuration mistakes
Automatic denial-of-service protection: monitors for malicious attacks and protects the network by blocking the
attacks
Management password: provides security so that only authorized access to the Web browser interface is allowed
Convergence
LLDP-MED (Media Endpoint Discovery): is a standard extension of LLDP that stores values for parameters such as
QoS and VLAN to automatically configure network devices such as IP phones
PoE allocations: support multiple methods (automatic, IEEE 802.3af class, LLDP-MED, or user specified) to allocate
PoE power for more efficient energy savings
Auto voice VLAN: recognizes IP phones and automatically assigns voice traffic to dedicated VLAN for IP phones
Additional information
Green initiative support: provides support for RoHS and WEEE regulations
Green IT and power: use the latest advances in silicon development, shut off unused ports, and use variable-speed
fans to improve energy efficiency
Warranty and support
Lifetime warranty: for as long as you own the product with advance replacement and next-business-day delivery
(available in most countries)†
Electronic and telephone support: limited electronic and telephone support is available from HP; to reach our
support centers, refer to www.hp.com/networking/contact-support; for details on the duration of support provided with
your product purchase, refer to www.hp.com/networking/warrantysummary
†HP warranty includes repair or replacement of hardware for as long as you own the product, with next business day
advance replacement (available in most countries). The disk drive included with HP AllianceOne Advanced Services and
Services zl Modules, HP Threat Management Services zl Module, HP AllianceOne Extended zl Module with Riverbed
Steelhead, HP MSM765zl Mobility Controller and HP Survivable Branch Communication zl Module powered by Microsoft
Lync has a five-year hardware warranty. For details, refer to the Software license and hardware warranty statements at
www.hp.com/networking/warranty.
DA - 13677 Worldwide QuickSpecs — Version 7 — 5/14/2012
Page 3
QuickSpecs
HP 1910 Switch Series
Technical Specifications
HP 1910-48G Switch (JE009A)
Ports
48 RJ-45 auto-negotiating 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX, IEEE 802.3ab Type 1000BASE-T)
4 SFP 1000 Mbps ports
Supports a maximum of 48 autosensing 10/100/1000 ports plus 4 1000BASE-X SFP ports, or a
combination
Physical
Dimensions
17.4(w) x 10.24(d) x 1.7(h) in (44.2 x 26.01 x 4.32 cm) (1U height)
characteristics
Weight
6.8 lb (3.08 kg)
Memory and processor Module
ARM @ 333 MHz, 128 MB flash, 128 MB RAM; packet buffer size: 512
KB
Mounting
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)
Performance
100 Mb Latency
< 5 µs
1000 Mb Latency
< 5 µs
Environment
Electrical
characteristics
Achieved Miercom
Certified Green Award
Safety
Emissions
Management
Notes
Services
Throughput
up to 77.4 million pps
Routing/Switching
104 Gbps
capacity
Routing table size
32 entries
Operating temperature 32°F to 113°F (0°C to 45°C)
Operating relative
10% to 90%, non-condensing
humidity
Nonoperating/Storage -40°F to 158°F (-40°C to 70°C)
temperature
Nonoperating/Storage 10% to 95%, non-condensing
relative humidity
Voltage
100-240 VAC
Maximum power rating59.8 W
Frequency
50/60 Hz
Notes
Maximum power rating and maximum heat dissipation are the worstcase theoretical maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports
plugged in, and all modules populated.
UL 60950; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1-03
FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN
61000-3-2 2000, 61000-3-3; ICES-003 Class A
IMC - Intelligent Management Center; limited command-line interface; Web browser; SNMP
Manager; IEEE 802.3 Ethernet MIB
The HP 1910-48G Switch (JE009A) was formerly sold as the 3Com Baseline Plus 2952
(3CRBSG5293) and may ship with this product labeling.
SFP ports and copper ports work simultaneously, independent of each other to give a total of 52
Gigabit-capable ports
3-year, 4-hour onsite, 13x5 coverage for hardware (UV786E)
3-year, 4-hour onsite, 13x5 coverage for hardware (UV804E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UW033E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UW485E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates
(UW036E)
DA - 13677 Worldwide QuickSpecs — Version 7 — 5/14/2012
Page 4
QuickSpecs
HP 1910 Switch Series
Technical Specifications
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates
(UW488E)
3-year, 24x7 SW phone support, software updates (UV807E)
3-year, 24x7 SW phone support, software updates (UV789E)
1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (HR682E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR683E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support
(HR684E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UV787E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UV805E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UW034E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UW486E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UW037E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UW489E)
4-year, 24x7 SW phone support, software updates (UV790E)
4-year, 24x7 SW phone support, software updates (UV808E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UV788E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UV806E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UW035E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UW487E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UW038E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UW490E)
5-year, 24x7 SW phone support, software updates (UV791E)
5-year, 24x7 SW phone support, software updates (UV809E)
3 Yr 6 hr Call-to-Repair Onsite (UW491E)
3 Yr 6 hr Call-to-Repair Onsite (UW039E)
4 Yr 6 hr Call-to-Repair Onsite (UW492E)
4 Yr 6 hr Call-to-Repair Onsite (UW040E)
5 Yr 6 hr Call-to-Repair Onsite (UW493E)
5 Yr 6 hr Call-to-Repair Onsite (UW041E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR686E)
1-year, 24x7 software phone support, software updates (HR685E)
Refer to the HP website at: www.hp.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response times in your area,
please contact your local HP sales office.
HP 1910-24G-PoE (365 W) Switch (JE007A)
Ports
24 RJ-45 auto-negotiating 10/100/1000 PoE ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u
Type
100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3af PoE)
4 SFP 1000 Mbps ports
Supports a maximum of 24 autosensing 10/100/1000 ports plus 4 1000BASE-X SFP ports, or a
combination
Physical
Dimensions
17.4(w) x 16.54(d) x 1.7(h) in (44.2 x 42.01 x 4.32 cm) (1U height)
characteristics
Weight
6.8 lb (3.08 kg)
Memory and processor Module
ARM @ 333 MHz, 128 MB flash, 128 MB RAM; packet buffer size: 512
KB
Mounting
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)
Performance
100 Mb Latency
< 5 µs
DA - 13677 Worldwide QuickSpecs — Version 7 — 5/14/2012
Page 5
QuickSpecs
HP 1910 Switch Series
Technical Specifications
Environment
Electrical
characteristics
1000 Mb Latency
< 5 µs
Throughput
up to 41.7 million pps
Routing/Switching
56 Gbps
capacity
Routing table size
32 entries
Operating temperature 32°F to 113°F (0°C to 45°C)
Operating relative
10% to 90%, non-condensing
humidity
Non-operating/Storage -40°F to 158°F (-40°C to 70°C)
temperature
Non-operating/Storage 10% to 95%, non-condensing
relative humidity
Voltage
100-240 VAC
Maximum power rating523 W
PoE power
Frequency
Notes
Safety
Emissions
Management
Notes
Services
365 W
50 / 60 Hz
Maximum power rating and maximum heat dissipation are the worstcase theoretical maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports
plugged in, and all modules populated. PoE power is the power supplied
by the internal power supply. It is dependent on the type and quantity of
power supplies and may be supplemented with the use of an external
power supply (EPS).
UL 60950; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1-03
FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN
61000-3-2 2000, 61000-3-3; ICES-003 Class A
IMC - Intelligent Management Center; limited command-line interface; Web browser; SNMP
Manager; IEEE 802.3 Ethernet MIB
The HP 1910-24G-PoE (365 W) Switch (JE007A) was formerly sold as the 3Com Baseline Plus
2928
HPWR (3CRBSG28HPWR93) and may ship with this product labeling.
SFP ports and copper ports can work simultaneously, independent of each other to give a total of
28 Gigabit-capable ports.
3-year, 4-hour onsite, 13x5 coverage for hardware (UV786E)
3-year, 4-hour onsite, 13x5 coverage for hardware (UV804E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UW033E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UW485E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates
(UW036E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates
(UW488E)
3-year, 24x7 SW phone support, software updates (UV807E)
3-year, 24x7 SW phone support, software updates (UV789E)
1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (HR682E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR683E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support
(HR684E)
Installation with minimum configuration, system-based pricing (UW451E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UV787E)
DA - 13677 Worldwide QuickSpecs — Version 7 — 5/14/2012
Page 6
QuickSpecs
HP 1910 Switch Series
Technical Specifications
4-year, 4-hour onsite, 13x5 coverage for hardware (UV805E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UW034E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UW486E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UW037E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UW489E)
4-year, 24x7 SW phone support, software updates (UV790E)
4-year, 24x7 SW phone support, software updates (UV808E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UV788E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UV806E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UW035E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UW487E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UW038E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UW490E)
5-year, 24x7 SW phone support, software updates (UV791E)
5-year, 24x7 SW phone support, software updates (UV809E)
3 Yr 6 hr Call-to-Repair Onsite (UW491E)
3 Yr 6 hr Call-to-Repair Onsite (UW039E)
4 Yr 6 hr Call-to-Repair Onsite (UW492E)
4 Yr 6 hr Call-to-Repair Onsite (UW040E)
5 Yr 6 hr Call-to-Repair Onsite (UW493E)
5 Yr 6 hr Call-to-Repair Onsite (UW041E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR686E)
1-year, 24x7 software phone support, software updates (HR685E)
Refer to the HP website at: www.hp.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response times in your area,
please contact your local HP sales office.
HP 1910-24G-PoE (170 W) Switch (JE008A)
Ports
24 RJ-45 auto-negotiating 10/100/1000 PoE ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u
Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3af PoE)
4 SFP 1000 Mbps ports
Supports a maximum of 24 autosensing 10/100/1000 ports plus 4 1000BASE-X SFP ports, or a
combination
Physical
Dimensions
17.4(w) x 16.54(d) x 1.7(h) in (44.2 x 42.01 x 4.32 cm) (1U height)
characteristics
Weight
6.8 lb (3.08 kg)
Memory and processor Module
ARM @ 333 MHz, 128 MB flash, 128 MB RAM; packet buffer size: 512
KB
Mounting
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)
Performance
100 Mb Latency
< 5 µs
1000 Mb Latency
< 5 µs
Throughput
up to 41.7 million pps
Routing/Switching
56 Gbps
capacity
Routing table size
32 entries
Environment
Operating temperature 32°F to 113°F (0°C to 45°C)
Operating relative
10% to 90%, non-condensing
humidity
DA - 13677 Worldwide QuickSpecs — Version 7 — 5/14/2012
Page 7
QuickSpecs
HP 1910 Switch Series
Technical Specifications
Electrical
characteristics
Safety
Emissions
Management
Notes
Services
Non-operating/Storage -40°F to 158°F (-40°C to 70°C)
temperature
Non-operating/Storage 10% to 95%, non-condensing
relative humidity
Voltage
100-240 VAC
Maximum power rating255 W
PoE power
170 W
Frequency
50 / 60 Hz
Notes
Maximum power rating and maximum heat dissipation are the worstcase theoretical maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports
plugged in, and all modules populated. PoE power is the power supplied
by the internal power supply. It is dependent on the type and quantity of
power supplies.
UL 60950; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1-03
FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN
61000-3-2 2000, 61000-3-3; ICES-003 Class A
IMC - Intelligent Management Center; limited command-line interface; Web browser; SNMP
Manager; IEEE 802.3 Ethernet MIB
The HP 1910-24G-PoE (170 W) Switch (JE008A) was formerly sold as the 3Com Baseline Plus
2928
PWR (3CRBSG28PWR93) and may ship with this product labeling.
SFP ports and copper ports work simultaneously, independent of each other to give a total of 28
Gigabit-capable ports.
3-year, 4-hour onsite, 13x5 coverage for hardware (UV786E)
3-year, 4-hour onsite, 13x5 coverage for hardware (UV804E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UW033E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UW485E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates
(UW036E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates
(UW488E)
3-year, 24x7 SW phone support, software updates (UV807E)
3-year, 24x7 SW phone support, software updates (UV789E)
1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (HR682E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR683E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support
(HR684E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UV787E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UV805E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UW034E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UW486E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UW037E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UW489E)
4-year, 24x7 SW phone support, software updates (UV790E)
4-year, 24x7 SW phone support, software updates (UV808E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UV788E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UV806E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UW035E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UW487E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UW038E)
DA - 13677 Worldwide QuickSpecs — Version 7 — 5/14/2012
Page 8
QuickSpecs
HP 1910 Switch Series
Technical Specifications
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UW490E)
5-year, 24x7 SW phone support, software updates (UV791E)
5-year, 24x7 SW phone support, software updates (UV809E)
3 Yr 6 hr Call-to-Repair Onsite (UW491E)
3 Yr 6 hr Call-to-Repair Onsite (UW039E)
4 Yr 6 hr Call-to-Repair Onsite (UW492E)
4 Yr 6 hr Call-to-Repair Onsite (UW040E)
5 Yr 6 hr Call-to-Repair Onsite (UW493E)
5 Yr 6 hr Call-to-Repair Onsite (UW041E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR686E)
1-year, 24x7 software phone support, software updates (HR685E)
Refer to the HP website at www.hp.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response times in your area,
please contact your local HP sales office.
HP 1910-24G Switch (JE006A)
Ports
24 RJ-45 auto-negotiating 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX, IEEE 802.3ab Type 1000BASE-T)
4 SFP 1000 Mbps ports
Supports a maximum of 24 autosensing 10/100/1000 ports plus 4 1000BASE-X SFP ports, or a
combination
Physical
Dimensions
17.4(w) x 6.3(d) x 1.7(h) in (44.2 x 16 x 4.32 cm) (1U height)
characteristics
Weight
6.8 lb (3.08 kg)
Memory and processor Module
ARM @ 333 MHz, 128 MB flash, 128 MB RAM; packet buffer size: 512
KB
Mounting
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)
Performance
100 Mb Latency
< 5 µs
1000 Mb Latency
< 5 µs
Throughput
up to 41.7 million pps
Routing/Switching
56 Gbps
capacity
Routing table size
32 entries
Environment
Operating temperature 32°F to 113°F (0°C to 45°C)
Operating relative
10% to 90%, non-condensing
humidity
Non-operating/Storage -40°F to 158°F (-40°C to 70°C)
temperature
Non-operating/Storage 10% to 95%, non-condensing
relative humidity
Electrical
Voltage
100-240 VAC
characteristics
Maximum power rating31.5 W
Frequency
50/60 Hz
Notes
Maximum power rating and maximum heat dissipation are the worstcase theoretical maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports
plugged in, and all modules populated.
DA - 13677 Worldwide QuickSpecs — Version 7 — 5/14/2012
Page 9
QuickSpecs
HP 1910 Switch Series
Technical Specifications
Safety
Emissions
Management
Notes
Services
UL 60950; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1-03
FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN
61000-3-2 2000, 61000-3-3; ICES-003 Class A
IMC - Intelligent Management Center; limited command-line interface; Web browser; SNMP
Manager; IEEE 802.3 Ethernet MIB
The HP 1910-24G Switch (JE006A) was formerly sold as the 3Com Baseline Plus 2928
(3CRBSG2893) and may ship with this product labeling.
SFP ports and copper ports can work simultaneously, independent of each other to give a total of
28 Gigabit-capable ports.
3-year, 4-hour onsite, 13x5 coverage for hardware (UV786E)
3-year, 4-hour onsite, 13x5 coverage for hardware (UV804E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UW033E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UW485E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates
(UW036E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates
(UW488E)
3-year, 24x7 SW phone support, software updates (UV807E)
3-year, 24x7 SW phone support, software updates (UV789E)
1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (HR682E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR683E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support
(HR684E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UV787E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UV805E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UW034E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UW486E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UW037E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UW489E)
4-year, 24x7 SW phone support, software updates (UV790E)
4-year, 24x7 SW phone support, software updates (UV808E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UV788E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UV806E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UW035E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UW487E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UW038E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UW490E)
5-year, 24x7 SW phone support, software updates (UV791E)
5-year, 24x7 SW phone support, software updates (UV809E)
3 Yr 6 hr Call-to-Repair Onsite (UW491E)
3 Yr 6 hr Call-to-Repair Onsite (UW039E)
4 Yr 6 hr Call-to-Repair Onsite (UW492E)
4 Yr 6 hr Call-to-Repair Onsite (UW040E)
5 Yr 6 hr Call-to-Repair Onsite (UW493E)
5 Yr 6 hr Call-to-Repair Onsite (UW041E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR686E)
1-year, 24x7 software phone support, software updates (HR685E)
Refer to the HP website at: www.hp.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response times in your area,
please contact your local HP sales office.
DA - 13677 Worldwide QuickSpecs — Version 7 — 5/14/2012
Page 10
QuickSpecs
HP 1910 Switch Series
Technical Specifications
HP 1910-16G Switch (JE005A)
Ports
16 RJ-45 auto-negotiating 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX, IEEE 802.3ab Type 1000BASE-T)
4 SFP 1000 Mbps ports
Supports a maximum of 16 autosensing 10/100/1000 ports plus 4 1000BASE-X SFP ports, or a
combination
Physical
Dimensions
17.4(w) x 6.3(d) x 1.7(h) in (44.2 x 16 x 4.32 cm) (1U height)
characteristics
Weight
6.8 lb (3.08 kg)
Memory and processor Module
ARM @ 333 MHz, 128 MB flash, 128 MB RAM; packet buffer size: 512
KB
Mounting
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)
Performance
100 Mb Latency
< 5 µs
1000 Mb Latency
< 5 µs
Throughput
up to 29.8 million pps
Environment
Electrical
characteristics
Safety
Emissions
Management
Notes
Services
Routing/Switching
40 Gbps
capacity
Routing table size
32 entries
Operating temperature 32°F to 113°F (0°C to 45°C)
Operating relative
10% to 90%, non-condensing
humidity
Non-operating/Storage -40°F to 158°F (-40°C to 70°C)
temperature
Non-operating/Storage 10% to 95%, non-condensing
relative humidity
Voltage
100-240 VAC
Maximum power rating25.1 W
Frequency
50 / 60 Hz
Notes
Maximum power rating and maximum heat dissipation are the worstcase theoretical maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports
plugged in, and all modules populated.
UL 60950; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1-03
FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN
61000-3-2 2000, 61000-3-3; ICES-003 Class A
IMC - Intelligent Management Center; limited command-line interface; Web browser; SNMP
Manager; IEEE 802.3 Ethernet MIB
The HP 1910-16G Switch (JE005A) was formerly sold as the 3Com Baseline Plus PWR 2920
(3CRBSG2093) and may ship with this product labeling.
SFP ports and copper ports can work simultaneously, independent of each other to give a total of
20 Gigabit-capable ports.
3-year, 4-hour onsite, 13x5 coverage for hardware (UV786E)
3-year, 4-hour onsite, 13x5 coverage for hardware (UV804E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UW033E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UW485E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates
(UW036E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates
DA - 13677 Worldwide QuickSpecs — Version 7 — 5/14/2012
Page 11
QuickSpecs
HP 1910 Switch Series
Technical Specifications
(UW488E)
3-year, 24x7 SW phone support, software updates (UV807E)
3-year, 24x7 SW phone support, software updates (UV789E)
1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (HR682E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR683E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support
(HR684E)
Installation with minimum configuration, system-based pricing (UW451E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UV787E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UV805E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UW034E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UW486E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UW037E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UW489E)
4-year, 24x7 SW phone support, software updates (UV790E)
4-year, 24x7 SW phone support, software updates (UV808E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UV788E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UV806E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UW035E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UW487E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UW038E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UW490E)
5-year, 24x7 SW phone support, software updates (UV791E)
5-year, 24x7 SW phone support, software updates (UV809E)
3 Yr 6 hr Call-to-Repair Onsite (UW491E)
3 Yr 6 hr Call-to-Repair Onsite (UW039E)
4 Yr 6 hr Call-to-Repair Onsite (UW492E)
4 Yr 6 hr Call-to-Repair Onsite (UW040E)
5 Yr 6 hr Call-to-Repair Onsite (UW493E)
5 Yr 6 hr Call-to-Repair Onsite (UW041E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR686E)
1-year, 24x7 software phone support, software updates (HR685E)
Refer to the HP website at: www.hp.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response times in your area,
please contact your local HP sales office.
DA - 13677 Worldwide QuickSpecs — Version 7 — 5/14/2012
Page 12
QuickSpecs
HP 1910 Switch Series
Technical Specifications
HP 1910-8G Switch (JG348A)
Ports
8 RJ-45 auto-negotiating 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX, IEEE 802.3ab Type 1000BASE-T)
1 SFP 1000 Mbps port
Supports a maximum of 8 autosensing 10/100/1000 ports plus 1 1000BASE-X SFP ports, or a
combination
Physical
Dimensions
8.27(w) x 8.27(d) x 1.72(h) in (21 x 21 x 4.36 cm) (1U height)
characteristics
Weight
4.41 lb (2 kg), Fully loaded
Memory and processor Module
ARM @ 333 MHz, 128 MB flash, 128 MB RAM; packet buffer size: 512
KB
Mounting
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)
Performance
100 Mb Latency
< 5 µs
1000 Mb Latency
< 5 µs
Throughput
up to 13.4 million pps
Environment
Electrical
characteristics
Safety
Emissions
Management
Notes
Services
Routing/Switching
18 Gbps
capacity
Routing table size
32 entries
MAC address table size 8192 entries
Operating temperature 32°F to 113°F (0°C to 45°C)
Operating relative
10% to 90%, non-condensing
humidity
Non-operating/Storage -40°F to 158°F (-40°C to 70°C)
temperature
Non-operating/Storage 10% to 95%, non-condensing
relative humidity
Voltage
100-240 VAC
Maximum power rating14.4 W
Frequency
50/60 Hz
Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum
numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic,
all ports plugged in, and all modules populated.
UL 60950; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1-03
FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN
61000-3-2 2000, 61000-3-3; ICES-003 Class A
IMC - Intelligent Management Center; limited command-line interface; Web browser; SNMP
Manager; IEEE 802.3 Ethernet MIB
SFP port and copper ports work simultaneously, independent of each other to give a total of 9
Gigabit-capable ports.
Refer to the HP website at: www.hp.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response times in your area,
please contact your local HP sales office.
DA - 13677 Worldwide QuickSpecs — Version 7 — 5/14/2012
Page 13
QuickSpecs
HP 1910 Switch Series
Technical Specifications
HP 1910-8G-PoE+ (65W) Switch (JG349A)
Ports
8 RJ-45 auto-negotiating 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u
Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3af PoE, IEEE 802.3at)
1 SFP 1000 Mbps port
Supports a maximum of 8 autosensing 10/100/1000 ports plus 1 1000BASE-X SFP ports, or a
combination
Physical
Dimensions
10.24(w) x 11.81(d) x 1.72(h) in (26 x 30 x 4.36 cm) (1U height)
characteristics
Weight
6.61 lb (3 kg), Fully loaded
Memory and processor Module
ARM @ 333 MHz, 128 MB flash, 128 MB RAM; packet buffer size: 512
KB
Mounting
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)
Performance
100 Mb Latency
< 5 µs
1000 Mb Latency
< 5 µs
Throughput
up to 13.4 million pps
Environment
Electrical
characteristics
Safety
Emissions
Management
Notes
Services
Routing/Switching
18 Gbps
capacity
Routing table size
32 entries
MAC address table size 8192 entries
Operating temperature 32°F to 113°F (0°C to 45°C)
Operating relative
10% to 90%, non-condensing
humidity
Non-operating/Storage -40°F to 158°F (-40°C to 70°C)
temperature
Non-operating/Storage 10% to 95%, non-condensing
relative humidity
Voltage
100-240 VAC
Maximum power rating93 W
PoE power
65 W
Frequency
50/60 Hz
Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum
numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic,
all ports plugged in, and all modules populated.
PoE power is the power supplied by the internal power supply. It is dependent
on the type and quantity of power supplies.
UL 60950; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1-03
FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN
61000-3-2 2000, 61000-3-3; ICES-003 Class A
IMC - Intelligent Management Center; limited command-line interface; Web browser; SNMP
Manager; IEEE 802.3 Ethernet MIB
SFP port and copper ports work simultaneously, independent of each other to give a total of 9
Gigabit-capable ports.
Refer to the HP website at: www.hp.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response times in your area,
please contact your local HP sales office.
DA - 13677 Worldwide QuickSpecs — Version 7 — 5/14/2012
Page 14
QuickSpecs
HP 1910 Switch Series
Technical Specifications
HP 1910-8G-PoE+ (180W) Switch (JG350A)
Ports
8 RJ-45 auto-negotiating 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u
Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3af PoE, IEEE 802.3at)
1 SFP 1000 Mbps port
Supports a maximum of 8 autosensing 10/100/1000 ports plus 1 1000BASE-X SFP ports, or a
combination
Physical
Dimensions
10.24(w) x 11.81(d) x 1.72(h) in (26 x 30 x 4.36 cm) (1U height)
characteristics
Weight
6.61 lb (3 kg), Fully loaded
Memory and processor Module
ARM @ 333 MHz, 128 MB flash, 128 MB RAM; packet buffer size: 512
KB
Mounting
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)
Performance
100 Mb Latency
< 5 µs
1000 Mb Latency
< 5 µs
Throughput
up to 13.4 million pps
Environment
Electrical
characteristics
Safety
Emissions
Management
Notes
Services
Routing/Switching
18 Gbps
capacity
Routing table size
32 entries
MAC address table size 8192 entries
Operating temperature 32°F to 113°F (0°C to 45°C)
Operating relative
10% to 90%, non-condensing
humidity
Non-operating/Storage -40°F to 158°F (-40°C to 70°C)
temperature
Non-operating/Storage 10% to 95%, non-condensing
relative humidity
Voltage
100-240 VAC
Maximum power rating228 W
PoE power
180 W
Frequency
50/60 Hz
Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum
numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic,
all ports plugged in, and all modules populated.
PoE power is the power supplied by the internal power supply. It is dependent on the type and
quantity of power supplies.
UL 60950; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1-03
FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN
61000-3-2 2000, 61000-3-3; ICES-003 Class A
IMC - Intelligent Management Center; limited command-line interface; Web browser; SNMP
Manager; IEEE 802.3 Ethernet MIB
SFP port and copper ports work simultaneously, independent of each other to give a total of 9
Gigabit-capable ports.
Refer to the HP website at: www.hp.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response times in your area,
please contact your local HP sales office.
DA - 13677 Worldwide QuickSpecs — Version 7 — 5/14/2012
Page 15
QuickSpecs
HP 1910 Switch Series
Technical Specifications
Standards and
Device management
protocols
RFC 2819 RMON
(applies to all products in
series)
General protocols
IEEE 802.1D MAC Bridges
IEEE 802.1p Priority
IEEE 802.1Q VLANs
IEEE 802.1s (MSTP)
IEEE 802.1w Rapid Reconfiguration of Spanning Tree
IEEE 802.3 Type 10BASE-T
IEEE 802.3ab 1000BASE-T
IEEE 802.3ad Link Aggregation Control Protocol (LACP)
IEEE 802.3i 10BASE-T
IEEE 802.3x Flow Control
IEEE 802.3z 1000BASE-X
MIBs
RFC 1213 MIB II
RFC 1493 Bridge MIB
RFC 2021 RMONv2 MIB
RFC 2233 Interface MIB
RFC 2233 Interfaces MIB
RFC 2571 SNMP Framework MIB
RFC 2572 SNMP-MPD MIB
RFC 2573 SNMP-Notification MIB
RFC 2573 SNMP-Target MIB
RFC 2613 SMON MIB
RFC 2618 RADIUS Client MIB
RFC 2620 RADIUS Accounting MIB
RFC 2665 Ethernet-Like-MIB
RFC 2667 IP Tunnel MIB
RFC 2668 802.3 MAU MIB
RFC 2674 802.1p and IEEE 802.1Q Bridge MIB
RFC 2737 Entity MIB (Version 2)
RFC 3414 SNMP-User based-SM MIB
RFC 3415 SNMP-View based-ACM MIB
RFC 3418 MIB for SNMPv3
Network management
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
IEEE 802.1D (STP)
RFC 1215 SNMP Generic traps
QoS/Cos
IEEE 802.1P (CoS)
Security
IEEE 802.1X Port Based Network Access Control
DA - 13677 Worldwide QuickSpecs — Version 7 — 5/14/2012
Page 16
QuickSpecs
HP 1910 Switch Series
Accessories
HP 1910 Switch Series Transceivers
accessories
HP X121 1G SFP LC SX Transceiver
HP X121 1G SFP LC LX Transceiver
HP X121 1G SFP RJ45 T Transceiver
HP X120 1G SFP LC SX Transceiver
HP X120 1G SFP LC LX Transceiver
HP X124 1G SFP LC SX Transceiver
HP X124 1G SFP LC LX Transceiver
HP X120 1G SFP RJ45 T Transceiver
Cables
HP .5m Multi-mode OM3 LC/LC Optical Cable
HP 1m Multi-mode OM3 LC/LC Optical Cable
HP 2m Multi-mode OM3 LC/LC Optical Cable
HP 5m Multi-mode OM3 LC/LC Optical Cable
HP 15m Multi-mode OM3 LC/LC Optical Cable
HP 30m Multi-mode OM3 LC/LC Optical Cable
HP 50m Multi-mode OM3 LC/LC Optical Cable
HP 0.5 m PremierFlex OM3+ LC/LC Optical Cable
HP 1 m PremierFlex OM3+ LC/LC Optical Cable
HP 2 m PremierFlex OM3+ LC/LC Optical Cable
HP 5 m PremierFlex OM3+ LC/LC Optical Cable
HP 15 m PremierFlex OM3+ LC/LC Optical Cable
HP 30 m PremierFlex OM3+ LC/LC Optical Cable
HP 50 m PremierFlex OM3+ LC/LC Optical Cable
DA - 13677 Worldwide QuickSpecs — Version 7 — 5/14/2012
J4858C
J4859C
J8177C
JD118B
JD119B
JD493A
JD494A
JD089B
AJ833A
AJ834A
AJ835A
AJ836A
AJ837A
AJ838A
AJ839A
BK837A
BK838A
BK839A
BK840A
BK841A
BK842A
BK843A
Page 17
QuickSpecs
HP 1910 Switch Series
Accessory Product Details
NOTE: Details are not available for all accessories. The following specifications were available at the time of publication.
HP X121 1G SFP LC SX Ports
1 LC 1000BASE-SX port; Duplex: full only
Transceiver (J4858C) Physical characteristics Dimensions: 2.24(d) x 0.54(w) x 0.48(h) in. (5.69 x 1.37 x 1.22 cm)
Weight: 0.04 lb. (0.02 kg)
A small form-factor
Transceiver form factor: SFP
pluggable (SFP) Gigabit Environment
Operating temperature: 32°F to 158°F (0°C to 70°C)
SX
Operating relative humidity: 5% to 85%, noncondensing
transceiver that provides
Nonoperating/Storage temperature: -40°F to 203°F (-40°C to 85°C)
a full-duplex Gigabit
Altitude: up to 10,000 ft. (3 km)
solution
Electrical
Power consumption typical: 0.4 W
up to 550 m on
characteristics
multimode fiber.
Power consumption maximum: 0.7 W
Cabling
Type:
62.5/125 µm or 50/125 µm (core/cladding) diameter, gradedindex, low metal content, multimode fiber optic, complying with
ITU-T G.651 and ISO/IEC 793-2 Type A1b or A1a, respectively;
Maximum distance:
Services
2-220 m (62.5 µm core diameter, 160 MHz*km bandwidth
2-275 m (62.5 µm core diameter, 200 MHz*km bandwidth
2-500 m (50 µm core diameter, 400 MHz*km bandwidth)
2-550 m (50 µm core diameter, 500 MHz*km bandwidth)
Cable length: 2-550m
Fiber type: Multi Mode
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
HP X121 1G SFP LC LX Ports
1 LC 1000BASE-LX port (IEEE 802.3z Type 1000BASE-LX); Duplex: full
Transceiver (J4859C)
only
Physical characteristics Dimensions: 2.24(d) x 0.54(w) x 0.486(h) in. (5.69 x 1.37 x 1.23 cm)
HP X121 1G SFP LC LX
Weight:0.04 lb. (0.02 kg)
Transceiver: An SFP
Environment
Operating temperature: 32°F to 158°F (0°C to 70°C)
format
Operating relative humidity: 0% to 85%, noncondensing
gigabit transceiver with
Nonoperating/Storage temperature: -40°F to 212°F (-40°C to 100°C)
LC connectors using LX
Altitude: up to 10,000 ft. (3 km)
technology.
Cabling
Type:
Either single mode or multimode; 62.5/125 µm or 50/125 µm
(core/cladding) diameter, graded-index, low metal content,
multimode fiber optic, complying with ITU-T G.651 and ISO/IEC
793-2 Type A1b or A1a, respectively; Low metal content, singlemode fiber-optic, complying with ITU-T G.652 and ISO/IEC 793-2
Type B1;
Maximum distance:
DA - 13677 Worldwide QuickSpecs — Version 7 — 5/14/2012
Page 18
QuickSpecs
HP 1910 Switch Series
Accessory Product Details
Notes
Services
HP X121 1G SFP RJ45 Ports
T Transceiver (J8177C)
Physical
HP X121 1G SFP RJ45 characteristics
T Transceiver: An SFP
Environment
format
gigabit transceiver with
RJ45 connectors using
1000BaseT technology.
Cabling
2-550 m (multimode 62.5 µm core diameter, 500 MHz*km
bandwidth)
2-550 m (multimode 50 µm core diameter, 400 MHz*km
bandwidth)
2-550 m (multimode 50 µm core diameter, 500 MHz*km
bandwidth)
2-10,000 m (single-mode fiber)
A mode conditioning patch cord may be needed in some multimode fiber
installations.
Wavelength: 1310nm
Power Consumption: < 500mW Typical
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
1 RJ-45 1000BASE-T port (IEEE 802.3ab Type 1000BASE-T); Duplex:
full only
Dimensions: 2.71(d) x 0.54(w) x 0.55(h) in. (6.88 x 1.37 x 1.4 cm)
Weight: 0.06 lb. (0.03 kg)
Operating temperature: 32°F to 158°F (0°C to 70°C); with 100 LFM
airflow over the SFP module
Operating relative humidity: 0% to 95% @ 75°F (25°C), noncondensing
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)
Nonoperating/Storage relative humidity: 0% to 95% @ 77°F (25°C),
noncondensing
Altitude: up to 10,000 ft. (3000 km)
Cable type:
1000BASE-T: Category 5 (5E or better recommended), 100 Ù
differential 4-pair unshielded twisted pair (UTP) or shielded twisted pair
(STP) balanced, complying with IEEE 802.3ab 1000BASE-T;
Maximum distance:
Notes
100 m
Power consumption is nominally 1 watt.
For supported platforms and minimum software requirements to support
this product, see the document titled "Support for the J8177C
1000Base-T Mini-GBIC" on the "HP Mini-GBICs and SFPs" Manuals
Web page.
The J8177C Gigabit copper mini-GBIC is not supported on dualpersonality ports.
The J8177C is capable of 100 Mb operation. This is supported on only
the HP E8200zl, E5400zl, and HP E6200-24G-mGBIC yl Switches using
software version K.12.21 or later. Use the "auto-100" port setting to
enable 100 Mb operation.
Important: The earlier J8177B does not support 100 Mb operation.
When used in the Switch gl 20-Port 10/100/1000 Module (J4908A), the
DA - 13677 Worldwide QuickSpecs — Version 7 — 5/14/2012
Page 19
QuickSpecs
HP 1910 Switch Series
Accessory Product Details
Services
HP X120 1G SFP LC SX Ports
Transceiver (JD118B) Connectivity
A small form-factor
pluggable (SFP) Gigabit
SX transceiver that
provides a full-duplex
Gigabit solution up to
550m on a Multimode
fiber.
Physical
characteristics
Electrical
characteristics
Cabling
Services
HP X120 1G SFP LC LX Ports
Transceiver (JD119B) Connectivity
A small form-factor
pluggable (SFP) Gigabig
LX transceiver that
provides a full duplex
Gigabit solution up to
550m on MMF or 10Km
on SMF
Physical
characteristics
Electrical
characteristics
J8177C mini-GBIC can be installed in either the upper or lower miniGBIC
port, but will block access to the other port.
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details
about services and response times in your area, please contact your
local HP sales office.
1 LC 1000BASE-SX port
Connector type
LC
Wavelength
850 nm
Dimensions
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x
1.17 cm)
Full configuration
0.04 lb. (0.02 kg)
weight
Power consumption
0.8 W
typical
Power consumption
1.0 W
maximum
Maximum distance:
• FDDI Grade distance = 220m
• OM1 = 275m
• OM2 = 500m
• OM3 = Not Specified by standard
Cable length
up to 550m
Fiber type
Multi Mode
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details
about services and response times in your area, please contact your
local HP sales office.
1 SFP 1000BASE-LX port (IEEE 802.3z Type 1000BASE-LX)
Connector type
LC
Wavelength
1300 nm
Dimensions
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x
1.17 cm)
Full configuration
0.04 lb. (0.02 kg)
weight
Power consumption
0.8 W
typical
Power consumption
1.0 W
maximum
DA - 13677 Worldwide QuickSpecs — Version 7 — 5/14/2012
Page 20
QuickSpecs
HP 1910 Switch Series
Accessory Product Details
Cabling
Services
HP X124 1G SFP LC SX Ports
Transceiver (JD493A) Connectivity
JD493A HP X124 1G
SFP LC SX Transceiver
that
provides a full duplex
Gigabit solution up to
550m on Multi Mode
fiber.
Physical
characteristics
Electrical
characteristics
Cabling
Services
HP X124 1G SFP LC LX Ports
Transceiver (JD494A) Connectivity
Physical
characteristics
Electrical
characteristics
Cabling
Cable type:
Either single mode or multimode;
Maximum distance:
• 550m for Multimode
• 10km for Singlemode
Fiber type
Both
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details
about services and response times in your area, please contact your
local HP sales office.
1 LC 1000BASE-SX port
Connector type
LC
Wavelength
Dimensions
850 nm
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x
1.17 cm)
0.04 lb. (0.02 kg)
Full configuration
weight
Power consumption
0.8 W
typical
Power consumption
1.0 W
maximum
Maximum distance:
• 220m-550m
Fiber type
Multi Mode
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details
about services and response times in your area, please contact your
local HP sales office.
1 LC 1000BASE-LX port (IEEE 802.3z Type 1000BASE-LX)
Connector type
LC
Wavelength
1300 nm
Dimensions
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x
1.17 cm)
Full configuration
0.04 lb. (0.02 kg)
weight
Transceiver form factor SFP
Power consumption
0.8 W
typical
Power consumption
1.0 W
maximum
Maximum distance:
• 500m for Multimode
• 10km for Singlemode
DA - 13677 Worldwide QuickSpecs — Version 7 — 5/14/2012
Page 21
QuickSpecs
HP 1910 Switch Series
Accessory Product Details
Services
HP X120 1G SFP RJ45 Ports
T Transceiver (JD089B) Connectivity
Physical
characteristics
Electrical
characteristics
Cabling
Services
HP 0.5 m Multimode
OM3 LC/LC Optical
Cable (AJ833A)
Cabling
Notes
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details
about services and response times in your area, please contact your
local HP sales office.
1 RJ-45 1000BASE-T port (IEEE 802.3ab Type 1000BASE-T)
Connector type
RJ-45
Dimensions
2.71(d) x 0.54(w) x 0.55(h) in. (6.88 x 1.37 x
1.4 cm)
Full configuration
0.07 lb. (0.03 kg)
weight
Power consumption
0.8 W
typical
Power consumption
1.0 W
maximum
Cable type:
1000BASE-T: Category 5 (5E or better recommended), 100 Ù
differential 4-pair unshielded twisted pair (UTP) or shielded twisted pair
(STP) balanced, complying with IEEE 802.3ab 1000BASE-T
Maximum distance:
• 100m
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details
about services and response times in your area, please contact your
local HP sales office.
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with
effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC
for distances of up to 300 m
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125
um fiber optic cable and Ethernet assembly with LC duplex connectors
on one end and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical glass: Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical glass: Bandwidth: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: 600 / 600 meters
@850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber and designed to work in both the 850 and
1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
DA - 13677 Worldwide QuickSpecs — Version 7 — 5/14/2012
Page 22
QuickSpecs
HP 1910 Switch Series
Accessory Product Details
Services
HP 1 m Multimode OM3 Cabling
LC/LC Optical Cable
(AJ834A)
Notes
Services
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with
effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC
for distances of up to 300 m
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125
um fiber optic cable and Ethernet assembly with LC duplex connectors
on one end and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the
850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
DA - 13677 Worldwide QuickSpecs — Version 7 — 5/14/2012
Page 23
QuickSpecs
HP 1910 Switch Series
Accessory Product Details
HP 2 m Multimode OM3 Cabling
LC/LC Optical Cable
(AJ835A)
Notes
Services
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with
effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC
for distances of up to 300 m;
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125
um fiber optic cable and Ethernet assembly with LC duplex connectors
on one end and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the
850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
DA - 13677 Worldwide QuickSpecs — Version 7 — 5/14/2012
Page 24
QuickSpecs
HP 1910 Switch Series
Accessory Product Details
HP 5 m Multimode OM3 Cabling
LC/LC Optical Cable
(AJ836A)
Notes
Services
Cable type:
50/125 µm core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m;
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: This specification defines the detail requirements for a
tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic
cable and Ethernet assembly with LC duplex connectors on one end
and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the
850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
DA - 13677 Worldwide QuickSpecs — Version 7 — 5/14/2012
Page 25
QuickSpecs
HP 1910 Switch Series
Accessory Product Details
HP 15 m Multimode
OM3 LC/LC Optical
Cable (AJ837A)
Cabling
Notes
Services
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with
effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC
for distances of up to 300 m;
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125
um fiber optic cable and Ethernet assembly with LC duplex connectors
on one end and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the
850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at: www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
DA - 13677 Worldwide QuickSpecs — Version 7 — 5/14/2012
Page 26
QuickSpecs
HP 1910 Switch Series
Accessory Product Details
HP 30 m Multimode
OM3 LC/LC Optical
Cable (AJ838A)
Cabling
Notes
Services
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with
effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC
for distances of up to 300 m;
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125
um fiber optic cable and Ethernet assembly with LC duplex connectors
on one end and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the
850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at: www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
DA - 13677 Worldwide QuickSpecs — Version 7 — 5/14/2012
Page 27
QuickSpecs
HP 1910 Switch Series
Accessory Product Details
HP 50 m Multimode
OM3 LC/LC Optical
Cable (AJ839A)
Cabling
Notes
Services
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with
effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC
for distances of up to 300 m;
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125
um fiber optic cable and Ethernet assembly with LC duplex connectors
on one end and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the
850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at: www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
DA - 13677 Worldwide QuickSpecs — Version 7 — 5/14/2012
Page 28
QuickSpecs
HP 1910 Switch Series
Accessory Product Details
HP 0.5 m PremierFlex Notes
OM3+ LC/LC Optical
Cable (BK837A)
Services
HP 1 m PremierFlex
OM3+ LC/LC Optical
Cable (BK838A)
Notes
Services
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex
connectors on each end.
• Core diameter: 50um ± 3um; Cladding diameter: 125um ± 2um;
Coating diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade - Low Smoke Zero Halogen (LSZH)
thermoplastic.
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable,
50/125um, Type OFNR (UL), LSZH, cUL OFN FT4, ROHS. Cable also
has a longitudal white stripe that runs the entire length of the cable.
• Insertion Loss: less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310
nm @ 23°C as tested in accordance with EIA 455-46
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex
connectors on each end.
• Core Diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable,
50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also
has a longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source,
0.003dB/m added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
DA - 13677 Worldwide QuickSpecs — Version 7 — 5/14/2012
Page 29
QuickSpecs
HP 1910 Switch Series
Accessory Product Details
HP 2 m PremierFlex
OM3+ LC/LC Optical
Cable (BK839A)
Notes
Services
HP 5 m PremierFlex
OM3+ LC/LC Optical
Cable (BK840A)
Notes
Services
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex
connectors on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable,
50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also
has a longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source,
0.003dB/m added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex
connectors on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable,
50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also
has a longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source,
0.003dB/m added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
DA - 13677 Worldwide QuickSpecs — Version 7 — 5/14/2012
Page 30
QuickSpecs
HP 1910 Switch Series
Accessory Product Details
HP 15 m PremierFlex
OM3+ LC/LC Optical
Cable (BK841A)
Notes
Services
HP 30 m PremierFlex
OM3+ LC/LC Optical
Cable (BK842A)
Notes
Services
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex
connectors on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable,
50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also
has a longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source,
0.003dB/m added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex
connectors on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable,
50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also
has a longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source,
0.003dB/m added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
DA - 13677 Worldwide QuickSpecs — Version 7 — 5/14/2012
Page 31
QuickSpecs
HP 1910 Switch Series
Accessory Product Details
HP 50 m PremierFlex
OM3+ LC/LC Optical
Cable (BK843A)
Notes
Services
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex
connectors on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable,
50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also
has a longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source,
0.003dB/m added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
To learn more, visit: www.hp.com/networking
© Copyright 2012 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change
without notice. The only warranties for HP products and services are set forth in the express warranty statements
accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP
shall not be liable for technical or editorial errors or omissions contained herein.
DA - 13677 Worldwide QuickSpecs — Version 7 — 5/14/2012
Page 32
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement