GPSMAP

®

192C

Quick Reference Guide

Start-Up Sequence Simulator Shut Down

To turn on the GPSMAP 192C:

1. Press and hold the POWER key.

2. Press ENTER to acknowledge the warning. The

GPS Info Page displays while the GPSMAP 192C is acquiring satellite data.

To start the Simulator Mode:

1. Press MENU on the

GPS Info Page.

2. Highlight Start Simulator, and press ENTER.

Page Sequence

To Turn off the GPSMAP 192C:

Press and hold the POWER key for approximately three seconds.

Map Page Compass Page Numbers Page

Page Option Menus

Highway Page Active Route Page

To show page options, press the MENU button once.

Page Display Selection Find Function

To change the page display options:

1. Press MENU twice to display the Main Menu page, then highlight the Pages tab.

2. To select and deselect the pages, highlight the check box and press ENTER to check or uncheck the box.

3 To go directly to a page, highlight the appropriate Jump To, and press ENTER.

To use the Find options:

1. Press FIND to display the Find list.

2. Use the ROCKER to highlight a category, and press ENTER.

3. Use the ROCKER to highlight an item, and press ENTER.

Garmin International, Inc. 1200 East 151 st Street, Olathe, Kansas 66062, U.S.A.

Garmin (Europe) Ltd. Unit 5, The Quadrangle, Abbey Park Industrial Estate, Romsey, SO51 9DL, U.K.

Garmin Corporation No. 68, Jangshu 2 nd Road, Shijr, Taipei County, Taiwan

Keypad Usage

POWER/BACKLIGHT—turns the unit on and off and controls the screen backlighting.

PAGE—scrolls the main pages in sequence and returns the screen from a menu to a main page.

QUIT—returns display to a previous page, restores a data field’s previous value, and exits out of menus.

MENU—shows available options for the current page. Press twice to open the Main Menu.

ENTER—activates highlighted fields and confirms menu options and data entry.

MARK—captures your present location and show the Mark

Position window when pressed and held for two seconds.

NAV—starts the navigation options, allowing you to navigate using a waypoint, route, or track.

MOB (Man OverBoard)—marks your present location and instantly sets a return course to that point.

OUT—increases the zoom range of the Map and Highway Pages.

IN—decreases the zoom range of the Map and Highway Pages.

ROCKER—controls the movement of the cursor or pointer and is used to select options and locations, and to enter data.

FIND—starts the Find options, allowing you to search for user points, map items, and any optional data card information.

Part Number 190-00540-01 Rev B.

Printed in Taiwan

Data Entry Navigation

To enter data:

1. Highlight a field using the ROCKER.

2. Press ENTER to access the field.

3. Use the ROCKER to select alphanumeric characters.

4. Press ENTER to confirm.

5. You can also change the data in fields such as symbol, name, coordinates, and depth when marking a waypoint.

Marking Waypoints

To use the NAV key:

1. Press NAV to start the navigation selections.

2. Using the ROCKER, select Go To Point, Follow Route, or Follow Track, and press ENTER.

3. Select the point, track, or route from the list, and then press ENTER.

4. If you selected a point, press ENTER again while Go To is highlighted. If you selected a route or saved track, choose from the start selections, and press ENTER to begin navigation.

Backlight MOB

To mark a waypoint:

1. To capture your present location, press and hold ENTER/MARK until the

New Waypoint window appears.

2. Press ENTER/MARK to save the waypoint.

To graphically mark a waypoint:

1. Move the pointer to the map location.

2. Briefly press ENTER/MARK to open the New Map Waypoint window.

3. Press ENTER/MARK to save the new waypoint.

To adjust the backlight:

1. Briefly press the POWER key to start the

Backlight adjustment slider.

2. Press up or down on the ROCKER to adjust the backlight level.

3. Press ENTER to confirm and return to the previous screen.

To navigate to a MOB:

1. Press MOB to start the MOB function.

2. To store the MOB waypoint and begin immediate navigation to that point, press ENTER.

3. To stop MOB navigation, press NAV, and choose Stop Navigation.