user manual - Strumenti Musicali

user manual - Strumenti Musicali
Studio condenser microphone
Table of Contents
iRig Mic Studio XLR3
Register your iRig Mic Studio XLR3
Installation and setup4
Support and more info6
iRig Mic Studio XLR
Thank you for purchasing iRig Mic Studio XLR.
Your package contains:
iRig Mic Studio XLR
XLR cable
Mic clamp
Table top stand
Quick Start Guide
Registration Card
iRig Mic Studio XLR is an ultra-compact cardioid studio condenser microphone designed to be used in your
standard studio setup, or for capturing pro recordings on the go with your iOS, Android or Mac/PC and a
compatible interface like iRig Pro Duo, iRig Pro or iRig Pre.
Developed for professional studio-quality recordings, the iRig Mic Studio XLR features a high quality
unidirectional 1” condenser-electret microphone capsule. The iRig Mic Studio XLR is a pro-quality condenser
microphone that requires 48v phantom power which may be provided by a mixer, external microphone
preamplifier or interfaces like iRig Pro Duo, iRig Pro or iRig Pre. Output from the microphone’s XLRM-type
connector is Low impedance balanced.
Register your iRig Mic Studio XLR
By registering, you can access technical support, activate your warranty and receive free JamPoints™ which will
be added to your account. JamPoints™ allow you to obtain discounts on future IK purchases! Registering also
keeps you informed of all the latest software updates and IK products.
Register at:
Installation and setup
Before to connect the microphone the an external preamplifier, make sure the 48V phantom poer is set to Off.
1. Place the iRig Mic Studio XLR on its holder
2. Connect the XLR cable to the XLR male on the bottom of iRig Mic Studio XLR.
3. Connect the XLR cable to an audio interface/mixer/preamplifier capable to supply the 48V phatom power.
4. Turn ON the 48V phantom power on your interface/mixer/preamplier.
Microphone Type: condenser, back electret
Capsule Size: 1”
Polar Pattern: cardioid, unidirectional
Frequency Response: 20Hz - 20kHz
Maximum Sound Pressure: 142dB
Sensitivity: -37.5dB at 1 kHz
Equivalent Noise Level, A-weighted: 17dB-A
Connector Type: male 3-pin XLR
Please visit:
for the complete warranty policy.
Support and more info
iRig® Mic Studio XLR, AmpliTube®, VocaLive™, SampleTank®, iGrand Piano™ are trademarks or registered trademarks property of IK Multimedia Srl. All other product names and images, trademarks
and artists names are the property of their respective owners, which are in no way associated or affiliated with IK Multimedia. iPad, iPhone, iPod touch, Mac, Mac logo and GarageBand are trademarks
of Apple Computer, Inc., registered in the U.S. and other countries. Bluetooth is a trademark of Bluetooth SIG, Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF