Thermaltake Level 10 GT LCS 2.0 Installation guide
Thermaltake Level 10 GT LCS 2.0 is a high-performance liquid cooling system designed to keep your CPU running cool and stable even during the most demanding tasks. With its triple radiator design and powerful pump, the Level 10 GT LCS 2.0 can dissipate up to 1000W of heat, making it ideal for overclocked CPUs and high-end gaming systems. The system also features a digital temperature controller that allows you to monitor and adjust the fan speed and pump speed, giving you complete control over the cooling performance.
Advertisement
Advertisement
33
CAUTION
Before installing Thermaltake Bigwater 850 GT Liquid Cooling System, we strongly suggest you to read the manual thoroughly and make sure all components are included in the package. Please do follow the installation guide step-by-step. Improper installation may cause serious damage to the system as well as to the water cooling unit. Thermaltake will not responsible for any damages due to incorrect installation and incorrect usage of this product.
VORSICHT
Bevor Sie das Thermaltake Bigwater 850 GT Flüssigkeitskühlungssystem installieren, empfehlen wir Ihnen dringend, das Handbuch zu lesen und sicher zu stellen, dass alle Komponenten im Paket enthalten sind. Bitte folgen Sie der Installationsanleitung Schritt für Schritt. Eine nicht sachgerechte
Installation kann zu ernsthaften Beschädigungen des Systems sowie der
Wasserkühlungseinheit führen. Thermaltake ist nicht verantwortlich für
Beschädigungen aufgrund von unsachgemäßer Installation und falscher
Nutzung dieses Produkts.
ATTENTION
Avant d'installer le système de refroidissement liquide Thermaltake BigWater
850 GT, nous vous recommandons fortement de lire le manuel entièrement et de vous assurer que tous les composants soient inclus dans l'emballage.
Veuillez suivre le guide d'installation étape par étape. Une mauvaise installation peut provoquer de sérieux dégâts au système ainsi qu'à l'unité de refroidissement par eau. Thermaltake ne sera pas responsable de tous dommages dus à une mauvaise installation et une mauvaise utilisation de ce produit.
PRECAUCIONES
Antes de instalar el sistema de refrigeración líquida Thermaltake Bigwater 850
GT, le recomendamos encarecidamente que lea todo el manual y asegúrese de que todos los componentes se incluyen en el paquete. Siga la guía de instalación paso a paso. Una instalación inadecuada puede producir daños serios al sistema además de a la unidad de refrigeración por agua.
Thermaltake no se responsabiliza de los daños causados por una instalación incorrecta y el uso incorrecto de este producto.
ATTENZIONE
Prima di installare il sistema di raffreddamento a liquido Thermaltake Bigwater
850 GT, si raccomanda di leggere in modo approfondito il manuale e assicurarsi che tutti i componenti siano inclusi nella confezione. Seguire dettagliatamente la guida di installazione. L’installazione non corretta potrebbe causare seri danni al sistema, nonché all’unità di raffreddamento dell’acqua. Thermaltake non sarà responsabile di alcun danno dovuto a installazione non corretta e utilizzo non appropriato del presente prodotto.
CUIDADO
Antes de instalar o sistema de refrigeração líquida Thermaltake Bigwater 850
GT, recomendamos que leia cuidadosamente o manual e se certifique que todos os componente estão incluídos no pacote. Siga o guia de instalação passo a passo. A instalação indevida pode causar danos graves ao sistema, assim como à unidade refrigeradora a água. Thermaltake não ser responsabiliza por quaisquer danos devidos à instalação incorrecta e utilização indevida deste produto.
ΠΡΟΣΟΧΗ
Πριν από την εγκατάσταση του Συστήματος Υγρόψυξης Thermaltake Bigwater
850 GT, σας συνιστούμε ανεπιφύλαχτα να διαβάσετε το εγχειρίδιο σχολαστικά κ
αι να βεβαιωθείτε ότι όλα τα στοιχεία περιλαμβάνονται μέσα στη συσκευασία. Εφ
αρμόστε τον οδηγό εγκατάστασης βήμα-βήμα. Η εσφαλμένη εγκατάσταση ενδέχε
ται να προκαλέσει σοβαρή βλάβη στο σύστημα καθώς και στη μονάδα υδρόψυξη
ς. Η Thermaltake δε θα φέρει καμία ευθύνη για βλάβες λόγω εσφαλμένης εγκατ άστασης και εσφαλμένης χρήσης του συγκεκριμένου προϊόντος.
警告
在安裝曜越Bigwater 850 GT水冷散熱系統前,我們強烈的建議您先閱讀說明書與
檢查包裝內的零件是否齊全。請參照說明書來組裝Bigwater 850 GT。錯誤的安裝
方式可能會損害到您的電腦系統以及Bigwater 850 GT。若因錯誤的安裝方式和錯
誤使用方式而損害到您的電腦系統以及Bigwater 850 GT,曜越科技將不負任何賠
償責任。
警告
在安装曜越Bigwater 850 GT水冷散热系统前,我们强烈的建议您先阅读说明书与
检查包装内的零件是否齐全。请参照说明书来组装Bigwater 850 GT。错误的安装
方式可能会损害到您的计算机系统以及Bigwater 850 GT。若因错误的安装方式和
错误使用方式而损害到您的计算机系统以及Bigwater 850 GT,曜越科技将不负任
何赔偿责任。
34
35
注意
Thermaltake Bigwater 850 GT 液体冷却システムを取り付ける前に、このマニュ
アルをよく読み、付属品がパッケージにすべて含まれていることを確認する必
要があります。取り付けは、ガイドの指示に従い1段階ずつ行ってください。不
適切な取り付けは、システムとウォーター水冷装置のひどく損傷につながりま
す。Thermaltakeは本製品の誤った取り付けと不適切な使用による損傷に責任を
負いません。
ВНИМАНИЕ!
Перед установкой системы водяного охлаждения Thermaltake Bigwater
850 GT настоятельно рекомендуется внимательно прочитать руководство и проверить комплектацию системы. Обязательно выполняйте указания п о установке пошагово. Неправильная установка может привести к серьезн ому повреждению системы, а также блока водяного охлаждения. Компани я Thermaltake не несет ответственности за любые убытки, понесенные в р езультате неправильной установки и использования данного изделия.
DİKKAT
Thermaltake Bigwater 850 GT Sıvı Soğutmalı Sistemi’ni kurmadan önce, kı lavuzu ayrıntılı bir şekilde okumanız ve tüm bileşenlerin pakette yer aldığından emin olmanız şiddetle tavsiye edilir. Lütfen kurulum kılavuzunu adım adım takip edin. Kurulumun yanlış yapılması, su soğutmalı birimin yanı sıra sistemde de ciddi hasara neden olabilir. Thermaltake, bu ürünün yanlış kurulumu ve yanlış kullanımından doğacak herhangi bir hasar için sorumluluk kabul etmez.
ข้อควรระวัง
ก่อนที่จะติดตั้ง Thermaltake Bigwater 850 GT พร้อมระบบระบาย
ความร้อนด้วยน้ำ เราขอแนะนำเป็นอย่างยิ่งให้คุณอ่านคู่มือให้ละเอียด
ถี่ถ้วน และตรวจสอบว่ามีส่วนประกอบทั้งหมดอยู่ในชุดผลิตภัณฑ์
ครบถ้วนแล้ว กรุณาทำตามขั้นตอนต่าง ๆ ในคู่มือการตั้งทีละขั้นตอน
การติดตั้งที่ไม่เหมาะสมอาจก่อให้เกิดความเสียหายขั้นร้ายแรงต่อระบบ
ของเครื่องและระบบระบายความร้อนได้ Thermaltake จะไม่รับผิดชอบ
ใด ๆ ทั้งสิ้นต่อความเสียหายอันเนื่องมาจากการติดตั้งและการใช้งาน
ผลิตภัณฑ์ที่ไม่ถูกต้อง
Specification
2U Bay Drives
Pump
Liquid Tank
Water Block
Dimension
Weight
Dimension
Bearing
Maximum Capacity
Rated Voltage
Input current
Connector
Noise
Life time
Dimension
Capacity
Material
Dimension
Tubing & Hoes Clip
Weight
Radiator
Fan
Tube
Coolant
Application
Dimension
Material
Tube Design
Fin Design
Tubing & Hose Clip
Fan Dimension
Fan Speed
Noise
Fan Connector
Dimension
Material
Capacity
Major Material Ingredient
160 mm(L) X 148mm(W) X 85mm(H)
0.965(kg)
75(L) x 70(W) x 75(H) mm
Ceramic bearing
500 L/ hr
DC 12V
600 mA
4 pin
16 dBA
80,000 hr (MTBF)
130.2 (L) x 107.2(W) x 51.5(H) mm
330 c.c
POM (Cover & Connector) ,Copper (Base)
68mm(L) X 64mm(W) X 41mm(H)
For 9.5mm ID (3/8”) tubing
114(g)
AMD FM1/AM3+/AM3/AM2+/AM2
Intel LGA 2011/1366/1156/1155/775
273(L) x 120(W) x 28(H) mm
Aluminum
Aluminum, Dimple
Aluminum, Louvered
For 9.5mm ID (3/8”) tubing
120(L) x 120(W) x 25(H) mm
1000 ~ 2000 RPM
20 ~ 28 dB
4 pin
9.5mm ID(3/8”) tube
Green UV
1000 c.c
Propylene Glycol
36
EN
Components check
A B C D
E
CPU Waterblock x 1
F
Grease x 1 Screw x 4
Push-pin position
G
LGA775 Clip x 2
H
AMD Clip x 2
For LGA1155/1156 For LGA1366
LGA1155/LGA1156/LGA1366 Clip x 2
I J K
Hose Clip x 8
37
1000 c.c. Coolant x 1
Refill Bottle x 1
Water Tube 400cm x 1
Installation steps
Caution:
Please pay attention to the following,
1. DO NOT open the cover of liquid tank when system is on.
2. When replacing the coolant, open the tank cover after 30 minutes of system off.
3. In addition to filling the first coolant, make sure the system turns off every time when refilling the coolant.
Male Quickconn
Connector x 2
2-1 Step 1 Install Waterblock onto CPU
LGA775/LGA1155/LGA1156/LGA1366 Installation
1 C
Secure the LGA775 Clip (D)/ LGA1155/LGA1156/LGA1366
Clip (F) on the base of CPU Waterblock (A) with Screw (C).
D or F
A
EN
2
B
3
Lock
4
Apply a thin layer of Thermal
Grease (B) on the CPU.
Keep lock device of LGA775 Clip (D)/
LGA1155/LGA1156/LGA1366 Clip
(F) in pre-installed position.
Place the assembled waterblock on the processor, and then push the lock devices until hearing an "click" sound.
Tip: Push the lock devices diagonally to press the forces evenly.
AMD Installation
1
C
E
Secure the AMD Clip (E) on the base of
Waterblock (A) with screws (C).
A
2
B
Apply a thin layer of Thermal
Grease (B) on the CPU.
3
Place the assembled waterblock on the processor.
4
Align both side of the clips on the retention frame's tap, and then turn clockwise at the same time until both clips are secure tightly on the taps.
38
EN
2-2 Step 2. Install Water tube
A
A
B
A type (connection for waterblock and radiator)
1
Insert the Hose Clip (G) through the Water Tube (J).
2
3
Connect the tube to the waterblock or radiator. Use pliers to tighten the
Hose Clips (G).
Please determine the length by yourself.
Then cut the tubing accordingly.
39
B type (connection for quickconn connector)
Insert the Hose Clip (G) and
Quickconn Connector (K) through the tube.
Use pliers to tighten the Hose Clip (G).
EN
1
2-3 Step 3. Connect the Quickconn connector
2
Connect the Quickconn connector.
1
2-4 Step 4. Fill Coolant
2 3
Connect the 4-pin connector of pump and fan to power supply.
4
Open the cover of liquid tank.
Fill the tank up with coolant.
5 6
Turn on the PC power switch.
7
Liquid level will decrease when you power on the system, please keep filling coolant until the tank is filled up.
8
Please make sure liquid is flowing continuously and smoothly within the tube.
Close the cover of liquid tank.
9
Adjust the fan speed.
Turn off the PC power switch.
Caution:
1. If bubbles are forming within the tubing , you may tap the tube gently to remove them until all are gone.
2. After installation is completed, please ensure there are no bent tubings.
40
EN
2-5 Step 5. Power on the system
Turn on the PC power switch.
Komponentenüberprüfung
A B C D
DE
2-6 Step 6. Schedule Maintenance
Water Tank
Please regular check for water level within the water tank. If the liquid level is below the low level, please follow the installation step 4 on manual to refill the coolant.(We strongly recommend checking the water level once a month.)
Tubing
Tubing within the system must not be bent.
Replace tubing if necessary.
41
Q&A
Q:I'm running low on coolant.What's happening and what can I do?
A:The performance coolant included with main unit contains water based material so it is subject to natural evaporation. It is normal for the coolant to decrease depending on the usage or surrounding environment. For best performance, we highly recommend replacing the coolant every 6 month.
Q:How often do I have to refill the system?
A:Depending on the usage or surrounding environment, we strongly recommend checking the liquid level once a month to ensure optimal performance. If the liquid level is below the low level, please follow the installation step 4 to refill the coolant.
E
CPU-Wasserblock x 1
F
Fett x1 Schrauben x4
Push-pin position
G
LGA775 Clip x 2
H
AMD Clip x 2
I
For LGA1155/1156 For LGA1366
LGA1155/LGA1156/LGA1366 Clip x 2
J K
Schlauch-Clips x 8
1000 ccm
Kühlflüssigkeit x 1 Nachfüllflasche x 1
Wasserschlauch
400 cm x 1
Schnellanschluss x 2
Installationsschritte
VORSICHT
Bitte achten Sie auf das Folgende:
1. Öffnen Sie nicht die Abdeckung des Flüssigkeitstanks, solange das System eingeschaltet ist.
2. Wenn Sie das Kühlmittel ersetzen möchten, öffnen Sie die Tankabdeckung 30 Minuten nachdem das
System abgeschaltet wurde.
3. Stellen Sie zusätzlich zum Befüllen mit dem ersten Kühlmittel sicher, dass sich das System jedes Mal beim Nachfüllen des Kühlmittels abschaltet.
2-1 Schritt 1.Wasserblock auf CPU installieren
LGA775/LGA1155/LGA1156/LGA1366 Installation
1 C
Sichern Sie den Clip LGA775
(D)/LGA1155/LGA1156/LGA1366 Clip (F) auf der Basis des
CPU-Kühlers (A) mit Schraube (C).
D or F
A
42
2
B
DE
3
Lock
43
4
Bringen Sie eine dünne Schicht
Thermalpaste (B) die CPU auf.
Belassen Sie die Sperrvorrichtung von LGA775 Clip (D)/LGA
1155/LGA1156/LGA1366 Clip (F) in der vorinstallierten Position.
Setzen Sie den montierten Wasserblock auf den Prozessor und drücken Sie dann die Sperrvorrichtungen bis Sie ein "Klick"-
Geräusch hören.
Tipp: Drücken Sie diagonal auf die Sperrvorrichtungen, um gleichmäßig Druck auszuüben.
AMD Installation
1
C
E
Sichern Sie den AMD
Clip (E) mit Schrauben
(C) auf der Basis des
Wasserblocks (A).
A
3
2
B
Bringen Sie eine dünne Schicht
Thermalpaste (B) die CPU auf.
Platzieren Sie den zusammengebauten Wasserblock auf dem Prozessor.
4
Richten Sie beide Seiten der Clips auf dem Zapfen des
Halterahmens aus, drehen Sie dann gleichzeitig im
Uhrzeigersinn, bis beide Clips fest auf den Zapfen sitzen.
DE
2-2 Schritt 2. Wasserleitung installieren
A
A
B
1
A-Typ (Verbindung für Wasserblock und Kühler)
Führen Sie den Schlauch-Clip (G) durch den Wasserschlauch (J) ein.
2
3
Verbinden Sie den Schlauch zum Wasserblock oder Kühler. Benutzen Sie eine Zange, um die
Schlauch-Clips festzuziehen (G).
Bitte ermitteln Sie die Länge selbst. Dann schneiden
Sie die Leitung entsprechend zu.
B-Typ (Verbindung für Schnellanschluss)
Bringen Sie den Schlauch-Clip (G) und den
Schnellanschluss (K) durch den Schlauch ein.
Benutzen Sie eine Zange, um den Schlauch-
Clip (G) zu befestigen.
44
1
DE
2-3 Schritt 3. Verbinden Sie den Schnellanschluss
2
2-5 Schritt 5. Schalten Sie das System ein
Schalten Sie den PC ein.
DE
Verbinden Sie den Schnellanschluss.
1
Verbinden Sie den 4-poligen Anschluss der
Pumpe und des Lüfters mit der Stromzufuhr.
2-4 Schritt 4. Kühlflüssigkeit einfüllen
2 3 4
Öffnen Sie die Abdeckung des Flüssigkeitstanks.
Füllen Sie den Tank mit Kühlflüssigkeit.
Schalten Sie den PC ein.
Der Flüssigkeitsstand wird sich verringern, nachdem das System eingeschaltet wurde; füllen Sie bitte weiter Kühlmittel ein, bis der Tank voll ist.
5 6 7 8
2-6 Schritt 6. Wartungsterminplan
Wassertank
Überpüfen Sie regelmäßig den Wasserstand im
Wassertank. Wenn der Füllstand unter dem unteren Niveau ist, folgen Sie bitte
Installationsschritt 4 im Handbuch, um das
Kühlmittel nachzufüllen. (Wir empfehlen die
Überprüfung der Wasserstand einmal im Monat.)
Leitung
Die Schläuche innerhalb des Systems dürfen nicht geknickt sein. Ersetzen Sie Schläuche wenn notwendig.
45
Bitte stellen Sie sicher, dass die Flüssigkeit kontinuierlich und reibungslos in der
Röhre fließt.
9
Schließen Sie die
Abdeckung des
Flüssigkeitstanks.
Einstellen der
Ventilatorgeschwindigkeit.
Schalten Sie den PC aus.
VORSICHT
1. Sollten sich Blasen in der Röhre bilden, können
Sie leicht mit dem Finger dagegen schnippen, bis alle Blasen verschwunden sind.
2. Nach Abschluss der Installation überprüfen Sie bitte, dass es keine abgeknickten Röhren irgendwo gibt.
Q&A
(Fragen & Antworten)
F: Ich habe nur noch wenig Kühlmittel. Was ist passiert und was kann ich tun?
A: Das Leistungskühlmittel enthält auf Wasser basierendes Material; es unterliegt damit natürlicher Verdampfung. Es ist normal für das Kühlmittel, dass es je nach Gebrauch oder Umgebung weniger wird. Für beste Leistung empfehlen wir, die Kühlflüssigkeit alle 6
Monate zu ersetzen.
F: Wie oft muss ich das System nachfüllen?
A: In Abhängigkeit vom Gebrauch oder der Umgebung empfehlen wir dringend, den
Flüssigkeitsstand einmal im Monat zu überprüfen, um eine optimale Leistung sicher zu stellen. Sollte der Flüssigkeitsstand unter die untere Marke sinken, folgen Sie bitte dem
Installationsschritt 4, um Kühlflüssigkeit aufzufüllen.
46

Public link updated
The public link to your chat has been updated.
Advertisement