Shower Rose Instructions
This unit contains a flow restrictor at the entry point to the showerhead. For
low and unequal pressure applications the flow restrictor may need to be removed to obtain satisfactory shower performance.
To determine if the flow restrictor needs to be removed or not
1. Remove the existing shower head from the arm.
2. Set the shower to the temperature you normally shower at.
3. Time how long it takes to fill a 10 litre bucket.
LESS THAN 45 seconds to fill a
10 litre bucket
Do not remove the flow restrictor
MORE THAN 45 seconds to fill a 10 litre bucket
Do remove the flow restrictor see below
To remove the restrictor
1 4
Unscrew arm
2
Check all of the restrictor is removed.
5
Carefully remove washer
3
Carefully re insert washer.
6
Carefully remove flow restrictor Rescrew on arm
433017 Issue C
