slb-425 installation instructions
Installation Instructions
SLB-425 Hanger Bracket
FOR INFOCUS LP420/425/430/435
Prior to assembly, unpack carton and verify contents.
For security installation, use security hardware package inside the ALL-POINTS™
Security Kit. Follow the instructions below for attaching the bracket to the projector
using either standard hardware or security hardware.
If you are missing any of the following components, please contact Customer Service at
1-800-582-6480
(1)
(3)
SLB-425
M4 – 10 Machine Screws
(4)
(3)
Thumb Nuts
M4 Flat Washers
Installation Instruction:
1.
Turn projector upside down and attach the SLB-425 bracket to the projector using the
three M4 – 10 machine screws. When attaching the mount, be careful not to overtighten the screws.
2.
See RPA/Smart-Lift Instruction sheet for installing to mount.
CHIEF MANUFACTURING INC. 1-800-582-6480, Fax: 1-877-894-6918, Email: [email protected]
8850-000163
08/02/07
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement