HP Desktop Mini DVD ODD Expansion Module
Data sheet HP Desktop Mini DVD ODD Expansion Module Expand your storage Add a DVD DVD-Writer to your HP Desktop Mini PC with HP Desktop Mini DVD ODD Expansion Module.1 Easy assembly Slide and hook the Module to the PC with the included screws, connect with the included USB 3.0 cable, and use the integrated VESA mount to place the Module wherever you need it. Increase your storage and your lexibility Quickly and easily back up your files to DVD, and access media and data from DVDs and CDs. Make it secure Physically secure your HP Desktop Mini2 to the Module with the security screw included in each Kit. Mix and match Use this Module alongside another Module, or with the Security Sleeve, to create a custom solution for your HP Desktop Mini.2 Award-winning support Rest easy with a one-year limited warranty. 1 Each sold separately. See product QuickSpecs for exact configurations. 2 Each sold separately. See product QuickSpecs for exact configurations. Data sheet | HP Desktop Mini DVD ODD Expansion Module HP Desktop Mini DVD ODD Expansion Module Model number K9Q83AA Dimensions (w x l x d) 0.9 x 7 x 6.9 in (22.8 x 177 x 174.6 mm) Weight 712g (25.12oz) Color Jack Black Host Interface USB 3.0 Type B female connector Disc Capacity Up to 8.5 GB DVD double-layer or 4.7 GB standard single-layer Write / Read speeds DVD+R Up to 8X DVD+RW Up to 8X DVD+R DL Up to 6X DVD-R DL Up to 6X DVD-R Up to 8X DVD-RW Up to 6X CD-R Up to 24X CD-RW Up to 24X Connectors Single output USB 3.0 Type B Access times (typical reads, including setting) Random DVD-ROM: 160 ms (typical), CD-ROM: 140 ms (typical) Full Stroke DVD-ROM: 280 ms (typical), CD-ROM: 280 ms (typical) Source USB 3.0 Type B female connector DC Power Requirement 5 VDC ± 5%-100 mV ripple p-p DC Current 5 VDC - 1000 mA typical, 1600 mA maximum Power Environmental (all conditions noncondensing) Sign up for updates hp.com/go/getupdated Temperature (operating) 41° to 122° F (5° to 50° C) Relative Humidity (operating) 10% to 80% Maximum Wet Bulb Temperature (operating) 86° F (30° C) VESA mount Yes, 100mm Option kit contents 3 4mm ladder screws, 3 8mm ladder screws, 1 29mm secured torx screw, 1 54mm secured torx screw, 1 29mm torx screw, 1 54mm torx screw, 1 50mm USB 3.0 Type B USB to Type A cable, 1 80mm USB 3.0 Type B USB to Type A cable, Installation guide, Warranty Expansion Module Overview These modules can be mounted to the DM directly and to another module with screws in the kit that allow the module to slide into place. All modules can be used with the PC that is wrapped in the Security/Dual VESA Sleeve, and all can be mounted with standard VESA 100mm requirements. Both options can be secured in place with a tamper-resistant screw. They are powered by a single USB connection cable. The HP 260 and ProDesk 400 can support 2 expansion modules at a time using 2 USB Type A ports on the back of the unit Compatibility HP 260 Desktop Mini, HP ProDesk 400 Desktop Mini, HP ProDesk 600 Desktop Mini, HP EliteDesk 705 Desktop Mini, HP EliteDesk 800 Desktop Mini Share with colleagues Rate this document © Copyright 2016 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. 4AA5-7302ENW, December 2016, Rev 2.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project