advertisement
Thank you for purchasing Intenza product. Before installing or using the equipment, please read all instructions carefully to ensure that you have the knowledge to safely and properly operate all of this product’s features. The following will provide guidelines for quick set up and the correct way to use the equipment. We hope you can achieve the product experience that you expect.
Intenza 550 series treadmill has been tested and designed to comply with the regulations for Class A digital device and for class S, studio use. This product is in compliance with European Directives, i.e.
Machinery Directive 2006/42/EC, Low Voltage Directive 2006/95/EC. Intenza 550 series treadmill is designed to provide you with safe, intuitive, comfortable, reliable experience, guiding you to a healthy lifestyle.
CAUTION
Any changes or modifications to this equipment will affect the product warranty.
TRADEMARK NOTE
iPhone and iPod are trademarks of Apple Inc., registered in the U.S. and other countries.
“Made for iPod”, “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod, iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone may affect wireless performance.
Made for
iPhone® (iPhone 4S, iPhone 4, iPhone 3GS), iPod® (4
th
generation), and iPod nano® (6
th
generation).
1.
2.
2.1
2.2
3.
3.1
3.2
3.3
3.4
4.
4.1
4.2
4.3
4.4
4.5
4.6
4.7
4.8
4.9
4.10
5.
6.1
6.2
6.3
6.4
7.
7.1
7.2
7.3
8
5.1
5.2
5.3
5.4
5.5
5.6
5.7
6.
9
TABLE OF CONTENTS
SECTION DESCRIPTION .......................................................................... PAGES
IMPORTANT SAFETY PRECAUTIONS .............................................. 1
TREADMILL OVERVIEW AND ASSEMBLY ....................................... 2
A
SSEMBLY
I
NSTRUCTION
550T
I
...................................................................................... 3
A
SSEMBLY
I
NSTRUCTION
550T
E
.................................................................................... 7
SETUP ............................................................................................... 11
E
LECTRICAL
P
OWER
R
EQUIREMENT
.............................................................................. 11
H
OW
T
O
S
TABILIZE
T
HE
I
NTENZA
550T
I AND
550T
E
....................................................... 11
C
HECKING THE
B
ELT
..................................................................................................... 12
P
OWER
S
WITCH
........................................................................................................... 12
HOW TO USE INTENZA 550TI AND 550TE ..................................... 13
I
NTENZA
550T
I
I
NTERACTIVE
C
ONSOLE
O
VERVIEW
........................................................ 13
I
NTENZA
550T
E
E
NTERTAINMENT
C
ONSOLE
O
VERVIEW
.................................................. 15
H
OW
T
O
O
PERATE
M
ULTIMEDIA
.................................................................................... 16
C
ENTRAL
C
ONTROL
C
ENTER
O
VERVIEW
........................................................................ 17
H
OW
T
O
E
FFECTIVELY
W
ORKOUT
A
T
Y
OUR
O
WN
L
EVEL
................................................ 18
H
OW
T
O
P
ERSONALIZE
Y
OUR
W
ORKOUT
....................................................................... 19
S
AVE
T
HE
W
ORKOUT
P
ROFILE
...................................................................................... 19
H
OW
T
O
T
RACK
Y
OUR
W
ORKOUT
R
ECORD
................................................................... 20
S
ETTING OF
550T
I
........................................................................................................ 22
S
ETTING
O
F
550T
E
...................................................................................................... 22
WORKOUT OPTIONS ....................................................................... 23
Q
UICK
S
TART
............................................................................................................... 23
P
RESET
P
ROGRAM
....................................................................................................... 24
T
ARGET
P
ROGRAM
....................................................................................................... 25
HRC P
ROGRAM
........................................................................................................... 26
C
USTOM
P
ROGRAM
...................................................................................................... 28
R
ACE
P
ROGRAM
........................................................................................................... 29
F
ITNESS
T
EST
.............................................................................................................. 30
MAINTENANCE ................................................................................. 32
P
REVENTATIVE
M
AINTENANCE
T
IPS
............................................................................... 32
H
OW TO
A
LIGN THE
R
UNNING
B
ELT
............................................................................... 32
H
OW TO
T
ENSION THE
R
UNNING
B
ELT
........................................................................... 32
S
ELF
D
IAGNOSIS
.......................................................................................................... 33
TROUBLE SHOOTING ...................................................................... 34
W
HEN
T
O
C
ALL
F
OR
H
ELP
............................................................................................ 34
E
RROR
M
ESSAGE
......................................................................................................... 34
H
OW
T
O
U
SE
T
HE
S
AFETY
S
TOP
P
ULL
C
ORD
................................................................ 34
550TI EXPLODED DRAWING & PART LIST .................................... 35
550TE EXPLODED DRAWING & PART LIST ................................... 36
1. IMPORTANT SAFETY PRECAUTIONS
Warning
z Intenza 550 series treadmill is designed for cardio vascular exercise in a commercial environment. z Health-related injuries may result from incorrect or excessive use of exercise equipment. Please check with your physician prior to beginning any exercise program. z Heart rate monitoring systems may be inaccurate. Over exercise may result in serious injury or death. If you feel faint, stop exercising immediately.
Safety Precautions
z Unsupervised children must be kept away from this equipment. z Assemble and operate the equipment on a stable base and properly leveled. z Keep an open area of 6.5 feet by 3 feet (2000 mm x 1000 mm) behind the treadmill for clear of any obstructions, including walls, furniture, and other equipment. z Away from sources of heat, such as radiators, heat registers, and stoves. Avoid extreme temperature
changes. z Do not use outdoors or in an enclosed swimming pool environment. z Keep equipment away from water and moisture. Avoid dropping anything on or spilling anything inside the equipment to prevent electric shock or damage the electronics. z Never leave the equipment unattended when it is plugged in. Unplug the equipment from its power source when it is not in use for a long time. z Do not drop or insert any object, hands, or feet into any opening, or underneath the equipment. z Do not attempt to remove the cover or modify the equipment. Service should only be done by an authorized z Do not use the equipment with bare feet. Wear shoes with rubber or high-traction soles. Do not use shoes with heels, leather soles, cleats, or spikes. Make sure no stones are embedded in the soles. z Do not operate the equipment until the defective components are repaired. z Use the handrails whenever additional stability is required. In case of emergency, such as tripping, the user should grab the handrails and place his/her feet on the side platforms. The handrails may be held to enhance stability as needed, but are not for continuous use.
1
2. TREADMILL OVERVIEW AND ASSEMBLY
550Ti Overview
550Ti Part List
Open the shipping carton. Remove all parts from the carton and card boards inserts. Before you begin the assembly, verify that the following hardware items are packed with the equipment. Please prepare and use a 6 mm hex wrench to assemble the treadmill.
Image QTY
1 Interactive console assembly 1
2 Console bridge assembly 1
3 Right upright post 1
4 Left upright post
5 Flat washer, white
7 Flat washer, black
1
14
16
2
14
2 9 M8*95L(Black)
2
2.1 Assembly Instruction- 550Ti
STEP 1 Installing the left upright post- connect the two electrical connectors
NOTE
Ensure the two electrical connectors at the bottom of the left upright post are well-connected before moving to the next step.
STEP 2 Installing the left upright post- secure the left upright post
TOOL
5 Flat washer, white
6 Washer, star
8 Dome screw, M8*15L
STEP 3 Installing the right upright post- secure the right upright post
19
TOOL
5 Flat washer, white
6 Washer, star
8 Dome screw, M8*15L
4
3
STEP 4 Installing the console bridge- connect the two electrical connectors
NOTE
Ensure the two electrical connectors at the top of the left upright post are well-connected before moving to the next step.
STEP 5 Installing the console bridge- position the bridge on the top of the upright post
NOTE
Ensure you push any excess wires inside the left upright post.
STEP 6 Installing the console bridge- secure the left side of the console bridge
TOOL
5 Flat washer, white
6 Washer, star
8 Dome screw, M8*15L
4
STEP 7 Installing the console bridge- secure the right side of the console bridge
TOOL
5 Flat washer, white
6 Washer, star
8 Dome screw, M8*15L
STEP 8 Installing the 550Ti interactive console- connect the two electrical connectors
NOTE
Ensure the two electrical connectors at the buttom of the console are well-connected before moving to the next step.
STEP 9 Installing the 550Ti interactive console- secure the console
TOOL
6 Washer, star
7 Flat washer, black
M8*95L(Black)
9
Assembly finished
5
550Te Overview
550Te Part List
Open the shipping carton. Remove all parts from the carton and card bpards inserts. Before you begin the assembly, verify that the following hardware items are packed with the equipment. Please prepare and use a 6 mm hex wrench to assemble the treadmill.
Image QTY
1 Entertainment console assembly 1
2 Console bridge assembly 1
3 Right upright post
4 Left upright post
5 Flat washer, white
7 Flat washer, black 2
14
2
14
16
1
1
9 M8*95L(Black)
6
2.2 Assembly Instruction- 550Te
STEP 1 Installing the left upright post- connect the two electrical connectors
NOTE
Ensure the two electrical connectors at the bottom of the left upright post are well-connected before moving to the next step.
STEP 2 Installing the left upright post- secure the left upright post
TOOL
5 Flat washer, white
6 Washer, star
8 Dome screw, M8*15L
STEP 3 Installing the right upright post- Insert TV wire into right upright post tube
NOTE
Insert the TV wire through the upright post and ensure the TV wire do not fall inside the post.
7
STEP 4 Installing the right upright post- secure the right upright post
TOOL
5 Flat washer, white
6 Washer, star
8 Dome screw, M8*15L
STEP 5 Installing the console bridge- connect the two electrical connectors
NOTE
Ensure the two electrical connectors at the top of the left upright post are well-connected before moving to the next step.
STEP 6 Installing the console bridge- connect the TV wire connector
NOTE
Ensure the electrical connector of TV wire at the top of the right upright post is well-connected before moving to the next step.
8
STEP 7 Installing the console bridge- fix the TV wire connector
NOTE
When connecting the TV wire, ensure to twist lock the connector, then push the jacket to cover the connector.
STEP 8 Installing the console bridge- position the bridge on the top of the upright post
NOTE
Ensure to push any excess wires inside the right and left upright post.
STEP 9 Installing the console bridge- secure the left side of the console bridge
TOOL
5 Flat washer, white
6 Washer, star
8 Dome screw, M8*15L
9
STEP 10 Installing the console bridge- secure the right side of the console bridge
TOOL
5 Flat washer, white
6 Washer, star
8 Dome screw, M8*15L
STEP 11 Installing the 550Te Entertainment console- connect the electrical connectors
NOTE
1. Ensure the two electrical connectors and the connector of TV wire at the buttom of the console are well-connected before moving to the next step.
2. When connecting the TV wire, ensure to twist lock the connector, then push the jacket to cover the connector. Please refer to STEP 7.
STEP 12 Installing the 550Te Entertainment console- secure the console
TOOL
6 Washer, star
7 Flat washer, black
M8*95L(Black)
9
Assembly finished
10
3. SETUP
3.1 Electrical Power Requirement
Below is showing the current rating for Intenza 550 series treadmill based on supply voltage. Make sure that the
Intenza 550 series treadmill is supported by the proper line voltage for the installation location before plugging into the outlet.
Supply Voltage (VAC) Frequency (Hz) Current (Amps) Power consumption (kW)
3.2 How To Stabilize The Intenza 550Ti and 550Te
After placing the unit where it will be used, check its stability. If there is even a slight rocking motion or the unit is not stable, determine which stabilizing leg is not resting on the floor. To adjust, turn the stabilizing leg A or B until the rocking motion ceased and both stabilizing legs rest firmly on the floor. It is extremely important that the stabilizing leg be correctly adjusted for proper operation.
A
B
11
After Intenza 550 series treadmill has been installed and stabilized, the belt must be checked to confirm proper tracking. First, ensure the power cord is plugged into a suitable outlet. Second, turn on the treadmill. Stand on the side landing of the treadmill and straddle the belt. To start the belt, press the 4 mph button, If the striding belt appears off-center, please refer to Section 6.2 How to Align the Running Belt.
Located on the front panel at the base of Intenza 550 series treadmill. The On/OFF switch has two position – “I” for
ON and “O” for
12
1. Profile window
2. Message bar
3. Speed scale
4. Back / SCAN
10. Energy saver
4. HOW TO USE Intenza 550Ti AND 550Te
Operating Intenza 550 series treadmill is very easy. Learning the features and incorporating Intenza 550 series treadmill into your member’s fitness program is just as easy. In this chapter, you will learn the display function and how to get the most workouts from Intenza 550 series treadmill.
4.1 Intenza 550Ti Interactive Console Overview
Your Intenza 550Ti is equipped to provide you and your users unlimited exercise opportunities. Experiment with each feature to find the right combination for your fitness regimen. The console provides the operating controls and display elements described in the following paragraphs.
5. USB icon
6. Programs
7. Quick start/ Enter
8. Home / Stop
9. Smart workrate
13
1. Profile Window: This window displays are made of column of lights, which shows the information for setting up a workout.
2. Message Bar:
During the program set-up, operating instructions will be displayed in the message bar.
During the workout, below exercise data will be displayed for your reference. z HR: heart rate can be detected if the user is wearing the Polar heart rate chest strap or hold onto the contact heart rate grips consistently. z Incline: the incline percentage of the workout you are using. z Pace: how fast you cover a specific distance. z Time: the number of time elapsed since beginning the workout. z METs: the ratio of the work metabolic rate to the resting metabolic rate. z Calories: the number of calories burned since proceeding the workout. z Distance: the total number of miles or kilometers you have run so far. z Speed: the speed at which you are currently running, in miles-per-hour or kilometers-per-hour.
3. Speed Scale: This scale displays the speed. Increase and decrease the speed from 0.8 km/h to 20 km/h for
550Ti, and 0.8 km/h to 25 km/h for 550Te. Increment is at 0.1 km/h which can be adjusted by using the stick shift during the workout.
4. Back key and Scan:
During program set up, press this key to go back to previous selection for correction.
BACK
During the name setting, press this key to correct the wrong input.
i
SCAN
During the workout, the display information toggles between both exercises parameter in each message bar. Press SCAN to display that statistic continuously throughout the workout.
5. USB icon: This icon lights up when Intenza console detects the USB device.
6. Programs: Please refer to Section 5 Exercise Workout Option.
7. Quick start and Enter key:
QUICK START
Press this key to enter the workout mode promptly, without having to select a workout program. The default speed is at 0.8 km/h with no incline.
ENTER
During program set up, press this key to confirm selection or value.
8. Home and Stop key:
Press this key to go back to the first layer when necessary.
HOME
During the setting of saving confirmation, press this key to double confirm. (Please refer to
Section 5 Exercise Workout Option.)
STOP
This key is only effective when a selected program is operating. Press STOP once will end the workout program and the message bar will show the workout summary. Press STOP again will exit the workout program promptly.
9. Smart Workrate: The skirting light of Uni jog indicates the workout intensity. (Please refer to Section 4.5 How
To Effectively Workout At Your Own Level.)
10. Energy saver: The energy saver mode is used to minimize the power being used from the wall when Intenza
550Ti is not in use. Press this button to put Intenza 550Ti into energy saver mode after ending a workout.
Press this button to either “wake up” Intenza 550Ti.
14
4.2 Intenza 550Te Entertainment Console Overview
1. Energy saver
4. USB port
2. iPod dock
3. Headphone jack
1. Energy saver : The energy saver mode is used to minimize the power being used from the wall when
Intenza 550Te are not in use. Press this button to put Intenza 550Te into energy saver mode after ending a workout. Press this button to either “wake up” Intenza 550Te.
2. iPod dock: Allows an iPod to be docked and controlled by the display while charging battery. .
3. Headphone jack: Allows you to plug in headphone.
4. USB port: Allows for data download, read and play MP3 files.
5. Home screen:
Simplified Chinese, English, Spain, Germany, Japanese, Korean. Six kinds of language offered for your choice.
Language
Eco
USB setting
To minimize the power being used from the wall when the treadmill is not in use.
Allows you to customize your personal information, name, age, weight. (Please refer to
Section 4.10 Setting Of 550Te)
Scene change
Allows you to change the scene between multimedia and workout scenes.
Quick start
Programs
Allows the user to start a workout immediately, by passing any setup or goal setting.
Preset / Target / HRC / Custom / Race / Fitness Test
Allows the user to select programs to setup the goal or customize programs. (Please refer to Section 5 Workout Option.)
15
6. Multimedia Bar
Previous
Play
Next
In the now playing screen, press Previous skips to the previous song/ video in the list.
Press this button can play the selected song/video; while playing, press this button to pause the song/video being played.
In the now playing screen, press Next to skip to the next song in the list.
Allows you to control your iPod playlist from the display, listen to iPod music and watch iPod video.
Audio/Video- iPod
Allows you to enjoy the entertainment songs or videos from your personal USB device.
Audio/Video-USB
Play list
Sort the contents of iPod, USB and TV by play list.
Scene change
Allows you to change the scene between multimedia and workout scenes.
Tap on the Volume in the display and slide the volume bar up/down decrease/increase volume intensity. Press the Mute to turn off the volume.
Volume
Zoom
Press this button to zoom in/out the scene of video or movie.
4.3 How To Operate Multimedia
USB device
1. Insert the USB device to USB port.
2. Press the USB setting icon in the Multimedia bar of the current screen.
3. Follow the onscreen prompts.
iPod
1. Connect your iPod to the built-in iPod connector.
2. Press the iPod icon in the Multimedia bar shown on the screen.
3. Follow the onscreen instructions.
16
4.4 Central Control Center Overview
1. Quick Start
2. Incline button 8. 6 mph (Run) button
3. Decline button
4. Stick shift
7. 4 mph (Jog) button
6. 2 mph (Walk) button
5. Stop / Pause
1. Quick Start: Initiate the motor to begin at 0.8 kph and 0% elevation.
2. Incline Button: Use the incline arrow button to change the elevation. Each press of the button represents 0.5%
increment.
3. Decline Button: Use the decline arrow button to change the elevation. Each press of the button represents
0.5% decrease in elevation.
4. Stick shift: To adjust 550 series treadmill speed, move the speed control bar upward or downward. Each motion represents 0.1 km/h change of speed.
5. Stop / Pause: Press this key once to pause the workout. Press this key again to display workout information and exit the workout program. The pause time is set for 3 minutes. The display will count down from 3 resumed from “Pause”, the treadmill will go back to Homepage.
6. 2 mph (Walk) Button: The preset value of this button is 2 mph / 3 kph (Walk). During a workout, press this button to immediately change the speed to the preset value at 2 mph / 3 kph.
7. 4 mph / 6 kph (Jog) Button: The preset value of this button is 4 mph / 6 kph (Jog). During a workout, press this button to immediately change the speed to the preset value at 4 mph / 6 kph.
8. 6 mph / 9 kph (run) Button: The preset value of this button is 6 mph / 9 kph (Run). During a workout, press this button to immediately change the speed to the preset value at 6 mph / 9 kph.
17
4.5 How To Effectively Workout At Your Own Level
Smart Workrate system provides visual color feedback by skirting light. Skirting light of Uni jog enhances users to optimize their workout efforts for maximum result based on heart rate level, and to help users to stay in their target heart rate zones. Smart workrate system will detect heart rate by holding on to contact heart rate plates or by wearing a telemetry heart rate sensor chest strap. You are recommended to wear telemetry heart rate chest strap for this function. During workout there are 4 different colors as following which represent your workout intensity.
Green - The Energy Efficient or Recovery Zone - 55% to 65%
Training within this zone develops basic endurance and aerobic capacity. All easy recovery running should be completed at a maximum of 65%. Another advantage to exercise in this zone is that while you are happily fat burning you may lose weight and you will be allowing your muscles to re-energize with glycogen, which has been consumed during those faster pace workouts.
Yellow - The Aerobic Zone - 65% to 75%
Training in this zone will improve your cardiovascular system. The body’s ability to transport oxygen and carbon dioxide to and away from the working muscles can be developed and improved. As you become fitter and stronger from training in this zone, you may engage in some of your long weekend runs at up to 75% zone, so as to get the benefits of fat burning and improvement of aerobic capacity.
Orange - The Anaerobic Zone - 75% to 85%
Training in this zone will develop your lactic acid system. In this zone, your individual anaerobic threshold (AT) is found - sometimes referred to the point of deflection (POD). At these heart rates zone, the amount of fat being utilized as the main source of energy is greatly reduced and glycogen stored in the muscle is predominantly used.
One of the by-products of burning this glycogen is lactic acid. There is a point at which the body can no longer quickly remove the lactic acid from the working muscles. This is your anaerobic threshold (AT). Through the correct training, it is possible to delay the AT by being able to increase your ability to deal with the lactic acid for a longer period of time or by improving your AT level.
Red - The extreme Zone - 85% to 100%
Training in this zone will only be possible for a short period. It effectively trains your fast twitch muscle fibers and helps to develop speed. This zone is reserved for interval running and only the very fit are able to train effectively within this zone.
NOTE
The heart rate function of Intenza 550 series treadmill is intended only for use as an exercise aide. Various factors can affect the accuracy of your heart rate reading. The heart rate function of Intenza 550 series treadmill should not be considered or used as a medical device.
18
4.6 How To Personalize Your Workout
You can personalize the workout routine via USB. The USB function also gives access to the service technician to download the usage record of Intenza 550 series treadmill to track problem history and upgrade the new version of software.
Workout Data: While you exercise, your Intenza 550 series treadmill console will keep track of the following exercise parameters:
HR
METs
Incline
Calories
Pace
Distance
Time
Speed
These values will be recorded once every five seconds during the workout, if you have a USB installed before you begin a workout program. Your downloaded data will be placed in a TREAD folder on your USB device as a .csv
(Microsoft Excel compatible) format. You can open the file and review the data to track down your workout progress.
USB Port
USB port is on the lower right side of the console. When a USB is plugged in, the USB icon will light up.
4.7 Save The Workout Profile
Insert the USB device to USB port, if you want to save the workout profile
1. Press STOP or ENTER again to exit the workout summary mode and save the workout profile.
2. Choose YES to confirm saving or NO to exit by turning Uni jog and press ENTER to double confirm.
3. Choose FILE (SUNDAY~SATURDAY) by turning Uni jog and press ENTER to confirm.
4. When the display shows SAVING COMPLETED, the process of saving is finished.
19
4.8 How To Track Your Workout Record
You can easily personalize the workout routine and the workout data to manage your workout record. For tracking the record easily, there are three folders: Custom, Fitness and Workout data. Each folder contains the record of the workout program.
4.8.1 Custom
This folder contains seven files of the workout profile you saved as DAYS.
Meaning of information
1. The value A is the workout time.
2. The value B to AE is the workout speed per minute.
3. The rest of values from AF is the incline % per minute.
1
A B C … AE AF AG …
30 0 8 … 9 0 0 …
BI
0
Route: TREAD\CUSTOM\TDPP_SUN
4.8.2 Fitness
Route: TREAD\CUSTOM
This folder contains two files of Fitness Test score record, including TDFIT and IPPT. The value is the score you attained by fitness test.
Information of TDFIT workout records
1. File can be saved up to 30 score records, the most current record will be at the bottom.
2. The score record in USB needs to be multiplied by 0.1 to match the score displayed in the console. Please refer to below example and Section 5.7 VO2 MAX chart for more information.
A
1
0
2
0
3
0
…
…
…
…
28
43
29
25
30 213
A data x 0.1 = Score
213 x 0.1 = 21.3
Route: TREAD\FITNESS\TDFIT.CSV
Information of IPPT workout records
1. The IPPT scores can be saved without limitation, the most current record will be at the bottom.
2. The score recorded in USB reflects the real time you complete the workout. You can simply identify your score without any transition. Please refer to below example.
TIME(min:sec) Elevation(%) Distance(km)
1
7:18 2 2.4
7:12 2 2.4
2
…
…
32
8:12 2 2.4
Route: TREAD\FITNESS\IPPT.CSV
20
This folder contains file of workout data from all the programs of Intenza 550 series treadmill. The workout record will be saved automatically every 5 seconds.
Meaning of information:
1. Time: unit is five seconds.
2. Calories: the accumulated calories burned during the workout.
3. Distance: the accumulated running distance during the workout.
The score record in the USB file needs to be multiplied by certain value in order to match the score displayed in the console. Incline, MET, and Speed data should be multiplied by 0.1. Distance data should be multiplied by 0.01.
Please refer to below example. Route: TREAD\WKODATA\TDWD0000.CSV
Route:TREAD\WKO_DATA
INCLINE PACE
1
MET SPEED HR TIME CALORIES DISTANCE
100 0 44 27 0 5 0 0
2
100 0 44 27 0 10 0 0
3
4
100 1333 44 27 0 15 0 1
50 1333 21 13 0 20 0 1
inc.data x 0.1= Inc. %
50 x 0.1 = 5 %
Speed data x 0.1
13 x 0.1 = 1.3 (kph/mph)
Dist.data x0.01= Distance
1x 0.01 = 0.01 (Km/Mile)
MET data x 0.1
21 x 0.1 = 2.1
21
4.9
Setting of 550Ti
The user could customize own personal setting by USB. This friendly and convenient function is compatible with series of Intenza product, such as upright bike, recumbent bike, treadmill, elliptical trainer…etc. You can enjoy your workout and enter the programs promptly without inputting any personal information (name, age, weight) setting.
After using Intenza 550 series treadmill for a period of time, you may want to change some of the basic settings, e.g. distance unit or sound. In Setting mode, it can also detect which version of Intenza 550Ti treadmill controller board.
Personalize the setting with USB device:
1. Insert the USB device to USB port.
2. Select the UNIT (Km/Mile) by turning Uni jog and press ENTER.
3. Input AGE by turning Uni jog and press ENTER.
4. Input WEIGHT by turning Uni jog and press ENTER.
5. Select the SOUND (On/Off) by turning Uni jog and press ENTER.
6. Edit the alphabet of NAME by turning Uni jog and press ENTER to confirm the alphabet. Then select END at the beginning to confirm the NAME editing.
7. During the name editing, you can press BACK to correct the wrong input.
8. When you pause for 5 seconds or press STOP, END will show up. You can press ENTER to confirm and exit the setting mode.
Change the 550Ti setting:
1. Choose SETTING by turning Uni jog and press ENTER.
2. Select UNIT (Km/Mile) by turning Uni jog and press ENTER.
3. Select SOUND (On/Off) by turning Uni jog and press ENTER.
4. Finally, you will see the display version and press ENTER to go back to the home page.
Note
550 series interactive and entertainment console only support USB in FAT format. If your USB is in NTFS format, you need to reformat your USB to FAT format in order to be used in Intenza console.
4.10 Setting Of 550Te
The user can customize own personal settings by USB. This friendly and convenient function is compatible with both series of Intenza products, upright bike, recumbent bike, treadmill, elliptical trainer…etc. You can enjoy your workout and enter the programs promptly without any personal information (name, age, weight) setting. After using
Intenza 550Te for a period of time, you may want to change some of the basic settings, e.g. distance unit or sound.
Personalize and change the settings with USB device
1. Insert the USB device to USB port.
2. Press the USER SETTING on the screen.
3. Follow the onscreen instructions.
22
This section list out Intenza 550 series treadmill pre-programmed workouts. The following workout programs are easily accessed by turning the Uni jog dial switch and press to ENTER the programs. When you insert the USB device before starting your workout, Intenza console system can save your workout record automatically to the
USB in every five seconds during your workout.
Quick Start allows you to begin your workout by simply pressing one key. The default speed of Quick Start is at 0.8 km/h with 0% incline. You can adjust the speed and the incline % during the workout. The workout record can be saved automatically in every 5 seconds. You simply insert your personal USB device before proceeding your workout. When you complete the workout, workout profile can be saved to your USB device as a routine workout by filename of days to track your exercise progress.
To operate the Quick Start program:
1. Step on Intenza 550 series treadmill running deck.
2. If you want to save your workout record, insert the USB device to the USB port. Press QUICK START to enter the workout.
3. Proceed workout:
(1) For Intenza 550Ti, press ENTER or QUICK START to run treadmill. You don’t need to enter workout time and timer will count up from 0:00.
(2) For 550Te, press ENTER or QUICK START to run treadmill. The workout will automatically count down from 30 minutes.
4. During the workout, you can adjust the speed by using the STICK SHIFT, by pushing the stick shift forward to incline speed and pulling downward to decline speed.
5. During the workout Smart Workrate will indicate your change of heart rate. (Please refer to Section 4.5 How
To Effectively Workout At Your Own Level.)
6. During the workout, the workout data will be shown in the message bar under scan mode. Press SCAN to lock the workout data.
7. If you wish to PAUSE the workout, press STOP. In pause mode, the countdown timer will show up for 3 minutes and the power will go off after 3 minutes. You can press START and run to restart the console.
8. Press STOP key, if you wish to exit the program before you reach your workout goal, press STOP again or allow pause timer to expire.
9. Save the workout profile. (Please refer to Section 4.7 Save The Workout Profile.)
To enter into this workout on 550Te, follow the onscreen prompt message.
23
Intenza 550 series treadmill designs with 25 preset programs to add variety and challenges to your workout plan.
Each program provides different benefits and can help you to achieve your own personal fitness goals.
Workout Procedure
Step 1
Main Program
Walking Hill
Speed Interval
High Intensity
10 Weeks Running
Step 2
Select Profile
5 profiles
5 profiles
5 profiles
Input Time
10~99 Minutes
10 profiles: set running speed
Step 3
Input Speed
Walking Speed
Max Speed
Running Speed
Running Speed
START
Detailed instruction for Intenza 550 series treadmill
1. Step on Intenza 550 series treadmill running platform.
2. If you want to save your workout record, insert USB device to the USB port. Choose PRESET by turning Uni jog and press ENTER to confirm.
3. Choose MODE (WALKING HILL/SPEED INTERVAL/HIGH INTENSITY/10 WEEKS RUNNING) by turning
4. Select the profile you want to access and input the WORKOUT TIME you want by turning Uni jog and press
ENTER to confirm the setting.
5. Input MAX, WALKING or RUNNING SPEED by turning Uni jog and press ENTER to confirm. (Please refer to
Note on MAX LEVEL.)
6. During workout Smart Workrate will indicate your change of heart rate. (Please refer to Section 4.5 How To
Effectively Workout At Your Own Level.)
7. During workout, the workout data will be shown in message bar under scan mode. Press SCAN to lock the
8. If you wish to pause the program, press STOP. In pause mode, the countdown timer will show up for 3 minutes, and the power will go off after 3 minutes. You can press START and run to restart the console.
9. Press STOP key, if you wish to exit the program before you reach your workout goal, press STOP again or allow pause timer to expire.
NOTE
MAX SPEED: the peak of each column of workout profile. You need to input the MAX SPEED for your own workout target according to your physical ability. You may also adjust the speed and incline during the workout.
To enter into this workout on 550Te, follow the onscreen prompt message.
24
5.3 Target
Intenza 550 series treadmill offers 3 target workout options to meet your training goal, By setting time, distance, or calories, you may choose the program by turning the Uni jog dial switch to enter the program, If you want to save workout record, just insert the USB device before your workout start.
Workout Procedure
Step 1 Step 2
PROGRAM TARGET
Distance
Time
Distance setting: 1~99 km
Time setting: 10~99 minutes
Calories
Detailed instruction for Intenza 550 series treadmill
Calories setting: 10~2,500 cal
1. Step on Intenza 550 series treadmill running platform.
2. If you want to save your workout record, insert the USB device to the USB port. Choose TARKET program by turning Uni jog and press ENTER to confirm.
3. Choose MODE (DISTANCE/TIME/CALORIES) by turning Uni jog and press ENTER to confirm.
4. The distance range is from 1~99 km, the time range is from 10~99 minutes, and the calories range is from
10~2,500 cal. Press ENTER to confirm.
5. The timer will show up to count down for 3 seconds, then the workout will start automatically.
6. During workout SMART WORKRATE will indicate your change of heart rate. (Please refer to Section 4.5 of
How To Effectively Workout At Your Own Level.)
7. During workout, the workout data will be shown in message bar under SCAN mode. Press SCAN to lock the workout data.
8. If you wish to PAUSE the program, press STOP. In pause mode, the timer will show up and countdown for 1 minute, the power will go off after 1 minute. You can press START and run to restart the console.
9. Press STOP, if you wish to exit the program before you reach your workout goal, press STOP again or allow pause timer to expire.
To enter into this workout on 550Te, follow the onscreen prompt message.
25
Intenza 550 series treadmill offers 4 heart rate control workout options. The heart rate control workout program allows the user to program their target heart rate zone. During the HRC program, the LED will show the below profile which represents the target heart rate zone. Each column represents 1 minute of workout. The column that the user is currently using will flash for reference. You may just input the target workout heart rate % and your age, the Intelligent HR system will automatically calculate the personal target for you. The heart rate zone is calculated by using the following equation: (220-Age) x %=heart rate target zone. You may adjust the target heart rate zone by turning Uni jog switch during the workout time. The user must wear a telemetric heart rate chest strap for this workout.
Heart Rate Zone
AGE 60% 65% 70% 75% 80% 85%
10
126 137 147 158 168 179
20
120 130 140 150 160 170
30
114 124 133 143 152 162
40
108 117 126 135 144 153
50
102 111 119 128 136 145
60
96 104 112 120 128 136
70
90
80
84
98
91
105
98
113
105
120
112
128
119
90
78
99
73
85
79
91
85
98 104 111
91 97 103
Heart Rate Control Program options:
Workout Produce
Step 1
MODE
Constant HR
Interval HR
Hill HR
Cardio HR
Step 2
WORKOUT TIME
Time setting:
10~99 Minutes
Step 3
AGE
Age setting:
10~99
Step 4
TARGET HR
Refer to Heart
Rate Zone table
Step 5
HRC by
Incline
Speed
START
Detailed instruction for Intenza 550 series treadmill
1. Step on Intenza 550 series treadmill running platform.
2. If you want to save your workout record, insert the USB device to the USB port Choose HRC by turning Uni jog dial switch and press ENTER to confirm.
3. Choose MODE (CONSTANT HR/INTERVAL HR/HILL HR/CARDIO HR) by turning Uni jog and press ENTER
4. Input the WORKOUT TIME you want by turning Uni jog and press ENTER to confirm. You can choose the time from 10 to 99 minutes.
5. Input your AGE by turning Uni jog and press ENTER. The default value of age is at 30 years old, while you can adjust the value from 10 to 99 years old.
26
6. Input TARGET HEART RATE by turning Uni jog and press ENTER to confirm.
7. Choose HRC by INCLINE or by SPEED by turning Uni jog and press ENTER to confirm.
8. The timer will show up to count down for 3 seconds then the workout will start automatically.
9. During the workout, the workout data will be shown in message bar under SCAN mode. Press SCAN to lock the workout data.
10. During workout SMART WORKRATE will indicate your change of heart rate. (Please refer to section 4.5 How
To Effectively Workout At Your Own Level.)
11. If you wish to PAUSE the program, press STOP. In pause mode, the timer will show up and countdown for 3 minutes, the power will go off after 3 minutes. You can press START and run to restart the console.
12. Press STOP, if you wish to exit the program before you reach your workout goal, press STOP again or allow pause timer to expire.
NOTE
z Calculating your theoretical maximum heart rate by using age is an approximation. For more information, please contact a fitness professional or physician. z You must wear telemetric heart rate chest strap for HRC program. Contact HR cannot be detected at HRC. z The default TARGET HR (Percentage of max HR) of each mode of heart rate control program is set for different training purpose.
To enter into this workout on 550Te, follow the onscreen prompt message.
27
Custom program allows user to save personal workout data into the USB. The custom program offers max 7 personal profiles save by default file name, Monday, Tuesday, Wednesday, Thursday, Friday, Saturday, and
Sunday. You can customize the workout profile to meet your own workout goal. By using CUSTOM program, you may easily track exercise progress and choose the program you desire from the folders.
Detailed instruction for Intenza 550 series treadmill
1. Step on Intenza 550 series treadmill running deck.
2. Insert the USB device to USB port otherwise custom program is unable to operate.
3. Choose CUSTOM by turning Uni jog dial switch and press ENTER to confirm.
4. Choose FILE NAME (SUNDAY~SATURDAY) by turning Uni jog and press ENTER to confirm.
5. During the workout, you can adjust speed and incline %. The workout data will be shown on message center under scan mode. Press SCAN to lock the workout data.
6. During the workout Smart Workrate will indicate your heart rate level. (Please refer to Section 4.5 How To
Effectively Workout At Your Own Level.)
7. If you wish to PAUSE the program, press STOP. In pause mode, the timer will show up and countdown for 1 minute, the power will go off after 1 minutes. You can press START and run to restart the console.
8. Press STOP, if you wish to exit the program before you reach your workout goal, press STOP again or allow pause timer to expire.
9. If you want to keep the workout profile in the USB, choose YES to save the workout profile. (Please refer to
Section 4.7 Save The Workout Profile.)
To enter into this workout on 550Te, follow the onscreen prompt message.
28
Race program offers a fun and challenging workout option. You can compete against with previous champion which saved in the system or your previous record from the USB. If you win the record in the system (the default champion), your record and name can be saved to the console system for the next challenger. Also you can save your record to the USB. Once you choose the race distance, the race tracks will be displayed in the profile window.
The outer lap represents the user and the inner lap represents your competitor. The laps will display the racing status by flashing LED light during your workout. A lap equals 400 meter, and the number shown next to the laps is the laps remaining. This race program is default at speed 0.8 km/h with 0% incline , you can adjust the speed and incline during the workout.
Workout Procedure
Step 2 Step 1
Race type
Competitor
Step 3
Warm up
Step 4
Start
3 km
USB user
5 km Running
Press
Start
Champion
10 km
Detailed instruction for Intenza 550 series treadmill
Step 5
Race
Duration
Step 6
Cool down
4 minutes
1. Step on Intenza 550 series treadmill running platform.
2. Choose RACE by turning Uni jog dial switch and press ENTER to confirm.
3. Choose MODE (3KM, 5KM, 10KM) by turning Uni jog switch and press ENTER to confirm.
4. Select the competitor by turning Uni jog switch.
Champion from Intenza system:
Step 7
Save the record
Auto saving by USB
Input name to console memory
Your previous record from USB:
(1) Insert the USB device to USB port.
5. Press ENTER to start the workout, after you finish the WARM UP.
6. During the workout SMART WORKRATE will indicate your condition of heart rate. (Please refer to Section 4.5
How To Effectively Workout At Your Own Level.)
7. During the workout, the workout data will be shown in message bar under SCAN mode. Press SCAN to lock the workout data.
8. You will lose the race if you press STOP. When you win the race, Intenza 550 series treadmill will enter COOL
DOWN mode for 4 minutes.
9. Press STOP to exit the program before you reach your workout goal, press STOP again or allow pause timer
10. Racing result will be displayed in the profile window. You can save your name into Intenza console system when you win the last champion. Also, you can save the racing record under win or lose to your personal USB
device.
Save win record into Intenza system
1. Input your name in alphabet by turning Uni jog and press ENTER.
2. During the name editing, you can press BACK to correct the wrong input.
3. When you complete your input, pause for 5 seconds or press STOP then END will show up. You can press
ENTER to confirm.
Save racing win record into personal USB
1. Press STOP or ENTER to exit the summary mode.
2. Choose YES to confirm saving or NO to exit by turning Uni jog and press ENTER to double confirm.
3. When the display shows SAVING COMPLETED, the process of saving is finished.
To enter into this workout on 550Te, follow the onscreen prompt message.
29
VO2 max technology is useful in measuring the ability of an individual to transport and utilize oxygen during exercise progression. It is beneficial to human for medical diagnosis, maximization of athletic performance, and determination of fitness performance in certain occupation, such as the U.S. Air Force, where specific standards must be met in order to remain employed. It is particularly useful in cardiology, sports medicine, and rehabilitative medicine.
The test starts at a low speed and gradually increases in speed levels. The test will end when the user press STOP.
Use of a telemetry heart rate strap is optional but can transmit more data to the system during the test. Once you finish the test and recovery period (cool down), the workout result and scores will be displayed in the profile window.
You can refer to VO2 MAX CHART to interpret your test score.
Workout Procedure
Step 1
Test type
Walk
Run
Step 1
Test type
IPPT
(Applied for 550Ti only)
Step 2
Age
Default value: 30
Range:10~99
Step 2
Select running speed
1 km~20 km
Step 3
Gender
Male
Female
Detailed instruction for Intenza 550 series treadmill
Step 4
Workout
Step 3
Workout
Duration
Step 5
Cool down
Step 4
Cool down
3 minutes
1.
Step on Intenza 550 series treadmill running platform.
2.
Choose FITNESS TEST by turning Uni jog dial switch and press ENTER to confirm.
3.
Choose Fitness Test WALK or RUN or IPPT mode by turning Uni jog dial switch and press ENTER to
confirm.
4.
When you are in WALK or RUN mode:
(1) Input your AGE by turning Uni jog switch and press ENTER to confirm.
(2) Input your GENDER by turning Uni jog switch and press ENTER to confirm.
(3) In the WALKING mode as a MALE, you must maintain the required speed from 5.3 km/h to 9.8 km/h while the required incline from 0% to 15%. In the WALKING mode as a FEMALE, you must maintain the required speed from 4.8 km/h to 7.2 km/h while the required incline from 0% to 15%. The workout time for
WALKING mode is 30 minutes for both MALE and FEMALE. In the RUNNING mode, you must maintain the required speed from 2.7 km/h to 8.6 km/h while the required incline from 10% to 15%. The required speed and incline level are the same for both MALE and FEMALE. The workout time is 15 minutes. Please note during the fitness test, you can not adjust the speed and incline.
(4) When you reach the target, Intenza 550 series treadmill will enter COOL DOWN mode for 4 minutes. If you are no longer keep up with the speed, press STOP to exit the workout.
(5) The score will be shown on the console in either you finish the test or press STOP to leave the workout.
(6) The test result will be uploaded to USB for print out report. Route: \TREAD\FITNESS\TDFIT.
When you are in IPPT mode:
(1) Insert USB device to USB port otherwise IPPT program is unable to operate. Again, IPPT mode is applied for 550Ti only.
(2) Select your speed from 1 km to 20 km, then press ENTER to confirm.
(3) IPPT program requires finishing target distance at 2.4km in fixed 2% elevation. The running speed can be adjusted during test. Upon completion of 2.4km, the IPPT test time will be shown on the console and be saved in USB. If the user does not finish 2.4km, the IPPT test time will not be displayed.
(4) The test result will be uploaded to USB for print out report. Route: \TREAD\FITNESS\IPPT.
5.
During the workout SMART WORKRATE will indicate your condition of heart rate. (Please refer to Section 4.5
How To Effectively Workout At Your Own Level.)
6.
During the workout, the workout data will be shown on message center under SCAN mode. Press SCAN to lock the workout data.
7.
If your HR is over 100% maximum, the test program will stop automatically for your personal safety.
To enter into this workout on 550Te, follow the onscreen prompt message.
30
VO2 MAX CHART
Male (values in ml/kg/min)
Age Very Fair Good Excellent Superior
35.0 38.4-45.1
45.2-50.9
51.0-55.9
> 55.9
33.0 36.5-42.4
42.5-46.4
46.5-52.4
> 52.4
31.5 35.5-40.9
41.0-44.9
45.0-49.4
> 49.4
30.2 33.6-38.9
39.0-43.7
43.8-48.0
> 48.0
26.1 31.0-35.7
35.8-40.9
41.0-45.3
> 45.3
60+ <20.5 26.1-32.2
32.3-36.4
36.5-44.2
> 44.2
Female (values in ml/kg/min)
Age Very Fair Good Excellent Superior
25.0 31.0-34.9
35.0-38.9
39.0-41.9
> 41.9
23.6 29.0-32.9
33.0-36.9
37.0-41.0
> 41.0
22.8 27.0-31.4
31.5-35.6
35.7-40.0
> 40.0
21.0 24.5-28.9
29.0-32.8
32.9-36.9
> 36.9
20.2 22.8-26.9
27.0-31.4
31.5-35.7
> 35.7
17.5 20.2-24.4
24.5-30.2
30.3-31.4
> 31.4
31
6. MAINTENANCE
6.1 Preventative Maintenance Tips
With durable, high performance components, Intenza 550 series treadmill is designed for heavy usage with minimal maintenance required. To keep your Intenza 550 series treadmill in safety level, Intenza strongly recommends performing the regular daily and regularly preventative maintenance routines outlined below.
Daily maintenance
z Locate the product in a dry, cool place. z Before and after each exercise session, ensure the area around Intenza 550 series treadmill is free of obstacles and any clutter that may interfere with Intenza 550 series treadmill operation. z Remove excessive accumulations of dust, dirt, and other substances by using a clean, soft cloth and a non-abrasive liquid cleaner. Wipe down the exterior of the console, stick shift, handlebars, and contact heart rate grips. z Avoid getting extra moisture on the console. Keep the console free of fingerprints and sweat will extend the life z Never use ammonia, acid-based, or petroleum-based solvents on any surface area of Intenza 550 series treadmill as it may damage Intenza products.
Regularly maintenance
z Inspect the console mounting screws for security, and retighten if necessary. z Inspect the display panel keypads for wear. z Check the belt tension of running belt and drive belt. z Check the position (centering) of the striding belt. z Check operation of the emergency stop system. z Inspect and vacuum the area directly surrounding and under the unit regularly to keep debris from
accumulating.. z Check Intenza 550 series treadmill is well-leveled. All of its feet should be leveled to the floor, and should not wobble when in use. If not, re-level the equipment.
6.2 How to Align the Running Belt
During running or walking, your left and right foot may exert different force to the running belt. This will cause the running belt to run off centered. Intenza 550 series treadmill is designed and built to ensure proper belt tracking so that it will automatically re-centered by itself. Occasionally the belt may need further adjustment to keep it centered.
To center the belt, use the enclosed T wrench to adjust the rear roller position.
Running belt centering procedure
1. Never turn the bolts more than 1/4 turn at a time.
2. Always tighten one side and loosen the other to prevent over tightening the belt.
3. Turn on the treadmill. Adjust belt while the treadmill is running at 4 mph (6.4 kph) with no person on the
If belt is too far to the left side
1. Turn the left roller bolt 1/4 turn clockwise (to tighten)
2. Turn the right roller bolt 1/4 turn counterclockwise (to loosen)
If belt is too far to the right side
1. Turn the right roller bolt 1/4 turn clockwise (tighten)
2. Turn the left roller bolt 1/4 turn counterclockwise (loosen)
NOTE
1. After the adjustment, walk on the belt for five minutes to test. If the belt still slips, repeat the procedure but never turn the bolts more than 1/4 turn at a time. Over tightening the belt can significantly shorten the belt life.
2. To reduce the risk of electrical shock, always unplug the treadmill from the electrical outlet after using and
3. For Entertainment console, you should press the console power button to put the equipment into energy saving mode first, then unplug the power cord or switch off the equipment.
32
6.3 How to Tension the Running Belt
When you are walking on the running platform, you can feel a slipping sensation then the belt has stretched and is slipping across the rollers. The running belt will be stretched over time. This is a normal and common adjustment on any treadmill. To eliminate this slipping, see the instruction below.
If it is a minor adjustment
TENSION
TENSIO
1. Tension both bolts on the rear roller 1/4 turn clockwise.
2. Try the treadmill at 1.0 km/h speed to check for slipping.
3. Try the treadmill again to check for slipping
If it is a significant adjustment
1. Place four pieces of tape, 1,000mm apart on both edges of the running belt.
2. Tighten the tensioning bolts until the distances between the tapes are increased to 1,005mm.
3. Try the treadmill again to check for slipping
Note
Make adjustments in 1/4 turn. DO NOT exceed one full turn of the Adjusting Screws. Over tightening the belt can significantly shorten the belt life.
Your Service Representative requires to check accumulated data about the past usage of Intenza 550 series treadmill, test the function and error message. For these reasons, Intenza 550 series treadmill is equipped with a service mode and can offer the diagnosis report for easy trouble shooting. Intenza 550Te is designed with build-in
WiFi that enhance on-line service function. On-line service function is a service diagnostic process that can automatically send out detected error message to Intenza customer service centre. Therefore, please make sure the Wi-Fi connection is well- connected after assembly. For more information of self diagnosis, please contact your local dealer or refer to the service manual.
33
7.1 When To Call For Help
1. Verify the symptom and review the operating instructions. The problem may be unfamiliarity with the product and its features and workout programs.
2. Check the error message then follow the instruction on the service manual.
3. When the display shows NEED MAINTENANCE, you are suggested to contact with your local distributor for
service.
4. If the problem you encounter has not been solved by the above steps, and Intenza 550 series treadmill is still not operational. Locate and document the serial number of the unit, and contact your local dealer.
5. Send the diagnosis report (Please refer to Section 6.4 Self Diagnosis for more information.) and serial number to your local distributor for service.
Note
Replace defective components immediately or keep the equipment out of use until the equipment gets repaired.
Where Is The Serial Number Of The Product
The serial number contains six digits, and there are two locations you can find Intenza 550 series treadmill serial number.One is located on the front of Intenza 550 series treadmill near the power switch; another is located on the mainframe that under the motor cover.
When the display shows below message, below corrections for checking the problem and you can also refer to the service manual for more details.
Message Solution 550Ti 550Te
NEED MAINTENANCE
CHECK MEMORY
Execute Self Diagnosis function to check error code, then refer to service manual for trouble shooting.
Change console main board.
●
●
●
CHECK CONSOLE PCB Change console main board.
● ●
CHECK USB COMM
●
USB STICK FAIL
CHECK IVT OR CABLE
CHECK SAFETY KEY
Change console main board.
Check the USB stick connection to USB board or cable from
USB board to console.
Check cable from display to the inverter, then change the PSB, and change the inverter finally.
Check safety key is inserted normally and then check cable.
●
●
●
●
●
●
OVERLOAD Check running belt, deck condition, then change inverter.
●
PFC Code 90- Check running belt, deck condition.
●
PFC Code 91- Check running belt, deck condition.
7.3 How To Use The Safety Stop Pull Cord
●
When operating on the treadmill, please attach the Safety Stop clip to your T-shirt. When the lanyard cord is pulled out from the treadmill, Intenza 550 series treadmill running belt will automatically slow down to stop. A message will be displayed on the console: “CHECK SAFETY KEY”. In order to restart the treadmill, just re-attach the safety key to the slot.
34
8 550Ti EXPLODED DRAWING & PART LIST
61 Cap, frame, end, L
No Item No
1 Console, 550Ti 21 Upright post, R
Item No Item No Item
41 Wire, connect
62 Cover, frame, rear, base 2 Holder, bottle, L
3
Cover, bridge, console, side,
L, Ti
4 Keypad, assy
22 Motor, drive, AC
23 Motor, incline
24 Cover, motor, outside, R
5 Holder, bottle, R
6
Cover, bridge, console, side,
R, Ti
7 Cable, signal, bridge
25 Cover, motor, inside, R
26 Frame, main
27 Bracket, support, inverter
42 Wire, connect
43 Wire, connect
44 Wheel
45 Pin, wheel, incline
46 Foot, PVC
8 Cover, bridge, console, top
9 Cover, bridge, console, btm
10 Bracket, bridge, console
28 Switch, power
29 Breaker, circuit
30 Inlet, AC
47 Pin, frame, incline
48 Upright post, L
49 Cover, motor, outside, L
50 Cover, motor, inside, L
11 Handlebar, front, L, overmold 31 Handlebar, side, L, overmold 51 Cover, frame, side, L
12 Handlebar, front, R, overmold 32 Cable, signal, frame 52 Side landing, L
13 Cover, motor, front, Ti 33 Wire, connect 53 Frame, incline
14 Cover, motor, top
15 Safety stop, assy
16 PCB, contact HR
17 Cable, receiver, wireless
18 Cable, keypad to console
34 Wire, connect
35 Cable, power, PSB-INV
36 Cable, resistance
37 Wire, connect
38 Wire, connect
19 Cable, contact, pulse 39 Wire, connect
20 Handlebar, side, R, overmold 40 Wire, connect
54 Inverter, 230V
55 Filter
56 Resistor, cement
57 PSB, electronic
58 Foot, adjustable
59 Guard, roller, L
60 Guard, roller, R
63 Cap, frame, end, R
64 Cushion, deck
65 Roller, rear
66 Deck, running
67 Belt, running
68 Side landing, R
69 Cover, frame, side, R
70 Belt,drive
71 Roller, front
35
9 550Te EXPLODED DRAWING & PART LIST
No Item No Item No
1 Console, 550Te 21 Handlebar, side, R, overmold
Item No Item
41 Wire, connect 61 Guard, roller, R
62 Cap, frame, end, L 2 Holder, bottle, L
3
Cover, bridge, console, side,
L, Te
4 Keypad, assy
22 Upright post, R
23 Motor, drive, AC
24 Motor, incline
5 Holder, bottle, R
6
Cover, bridge, console, side,
R, Te
7 Cable, signal, bridge
25 Cover, motor, outside, R
26 Cover, motor, inside, R
27 Frame, main
42 Wire, connect
43 Wire, connect
44 Wire, connect
45 Wheel
46 Pin, wheel, incline
8 Cover, bridge, console, top
9 Cover, bridge, console, btm
28 Bracket, support, inverter
29 Switch, power
47 Foot, PVC
48 Pin, frame, incline
49 Upright post, L
50 Cover, motor, outside, L
11 Handlebar, front, L, overmold 31 Inlet, AC 51 Cover, motor, inside, L
12 Handlebar, front, R, overmold 32 Handlebar, side, L, overmold 52 Cover, frame, side, L
13 Cover, motor, front, Te 33 Cable, signal, frame 53 Side landing, L
14 Cover, motor, top
15 Safety stop, assy
16 Cable, TV, console
17 PCB, contact HR
18 Cable, receiver, wireless
19 Cable, keypad to console
20 Cable, contact, pulse
34 Wire, connect
35 Wire, connect
36 Cable, power, PSB-INV
37 Cable, resistance
38 Wire, connect
39 Wire, connect
40 Wire, connect
54 Frame, incline
55 Inverter, 230V
56 Filter
57 Resistor, cement
58 PSB, electronic
59 Foot, adjustable
60 Guard, roller, L
63 Cover, frame, rear, base
64 Cap, frame, end, R
65 Cushion, deck
66 Roller, rear
67 Deck, running
68 Belt, running
69 Side landing, R
70 Cover, frame, side, R
71 Belt,drive
72 Roller, front
73 Cable, TV
36
SPECIFICATION OF Intenza 550Ti
Maximum user weight
Speed range:
Elevation range
CONSOLE
181kgs /400 lbs
0.8-20.0 km/h in 0.1 increments
0%-15% in 0.5% increments
Heart Pace, Time, METs, Calories, Distance, Speed
Summaries Total elapsed time of workout, total calories burned, total distance, total METs
Workout Quick start, Preset programs, Target programs, Heart rate programs, Custom
Heart rate monitor
Motor
Belt
Deck
550Ti DIMENSION
Dimension
Length:
Width:
Height:
Weight:
Polar telemetry heart rate monitoring system
4.0 HP AC
2.5mm pre-impregnated wax belt
Pre-waxed reversible deck
Assembly Dimension
2,145 mm / 84 inches
960 mm / 38 inches
1,535 mm / 60 inches
260 kgs / 573 lbs
Shipping Dimension
2,245 mm / 88.4 inches
1,085 mm / 42.7 inches
745 mm / 29.3 inches
280 KGS / 617 LBS
37
SPECIFICATION OF Intenza 550Te
Maximum user weight
Speed range:
Elevation range
CONSOLE
181kgs /400 lbs
0.8-25.0 km/h in 0.1 increments
0%-15% in 0.5% increments
Heart Pace, Time, METs, Calories, Distance, Speed
Summaries Total elapsed time of workout, total calories burned, total distance, total METs
Workout Quick start, Preset programs, Target programs, Heart rate programs, Custom
Heart rate monitor
Motor
Belt
Deck
550Te DIMENSION
Dimension
Length:
Width:
Height:
Weight:
Polar telemetry heart rate monitoring system
4.0 HP AC
2.5mm pre-impregnated wax belt
Pre-waxed reversible deck
Assembly Dimension
2,145 mm / 84 inches
960 mm / 38 inches
1,535 mm / 60 inches
262 kgs / 578 lbs
Shipping Dimension
2,245 mm / 88.4 inches
1,085 mm / 42.7 inches
745 mm / 29.3 inches
282KGS / 622 LBS
38
Manufactured by Intenza.16-3 Zichiang First Road, Jhongli, Taoyuan 320 Taiwan. www.Intenzafitness.com
Version: 2.0
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project