Samsung DE55C User manual User manual

Add to my manuals
243 Pages

advertisement

Samsung DE55C User manual User manual | Manualzz
User Manual
DE40C
DE46C
DE55C
The color and the appearance may differ depending on
the product, and the specifications are subject to
change without prior notice to improve the performance.
BN46-00299A-02
Table Of Contents
BEFORE USING THE
PRODUCT
PREPARATIONS
12
Copyright
13
Cleaning
13
Storage
14
Safety Precautions
14
15
16
18
Symbols
Electricity and Safety
Installation
Operation
23
Checking the Contents
23
25
Removing the Packaging (for DE40C and
DE46C models only)
Removing the Packaging (for DE55C models
only)
Checking the Components
28
Parts
28
30
31
32
35
Control Panel
Reverse Side
Anti-theft Lock
Remote Control
Connection Using an IR Stereo Cable
36
Before Installing the Product (Installation
Guide)
36
37
Tilting Angle and Rotation
Ventilation
38
Dimensions
39
Installing the Wall Mount
39
39
39
Preparing before installing Wall-Mount
Installing the Wall Mount Kit
Wall Mount Kit Specifications (VESA)
41
Remote Control
41
44
46
Cable Connection
Connection
Control Codes
24
Table Of Contents
2
Table Of Contents
CONNECTING AND USING
A SOURCE DEVICE
USING MDC
56
Before Connecting
56
Pre-connection Checkpoints
57
Connecting and Using a PC
57
60
Connecting to a PC
Changing the Resolution
62
Connecting an External Monitor
63
Connecting to a Video Device
63
63
64
64
65
65
Connection Using the AV Cable
Connection Using the Component Cable
Connection Using an HDMI-DVI Cable
Connection Using an HDMI Cable
Connecting to an Audio System
Connecting to an Antenna
66
Connecting the network box (Sold
separately)
66
MagicInfo
70
Changing the Input source
70
Source
71
Configuring Settings for Multi Control
71
Configuring settings for Multi Control
72
MDC Program Installation/Uninstallation
72
72
Installation
Uninstallation
Table Of Contents
3
Table Of Contents
SCREEN ADJUSTMENT
73
What is MDC?
73
75
76
77
78
79
81
82
84
87
88
97
100
105
Connecting to MDC
Connection Management
Auto Set ID
Cloning
Command Retry
Getting Started with MDC
Main Screen Layout
Menus
Screen Adjustment
Sound Adjustment
System Setup
Tool Settings
Other Functions
Troubleshooting Guide
107
Picture Mode
107
108
If the input source is PC, DVI or DisplayPort
If the input source is AV, Component, HDMI or
TV
108
Backlight / Contrast / Brightness /
Sharpness / Color / Tint (G/R)
109
Screen Adjustment
109
111
111
112
Picture Size
Zoom/Position
PC Screen Adjustment
Resolution Select
112
Auto Adjustment
Table Of Contents
4
Table Of Contents
SOUND ADJUSTMENT
CHANNEL
113
Advanced Settings
114
114
114
114
114
114
114
115
115
115
Dynamic Contrast
Black Tone
Flesh Tone
RGB Only Mode
Color Space
White Balance
10p White Balance (Off / On)
Gamma
Expert Pattern
Motion Lighting (Off / On)
116
Picture Options
117
117
117
117
118
118
118
118
Color Tone
Color Temp.
Digital Noise Filter
MPEG Noise Filter
HDMI Black Level
Film Mode
Calibrated Value
Dynamic Backlight
118
Reset Picture
119
Sound Mode
120
Sound Effect
121
Broadcast Audio Options
121
Speaker Settings
122
Reset Sound
123
Antenna (Air / Cable)
124
Auto Program
124
Clear Scrambled Channel
125
Fine Tune
125
Crosstalk Noise Reduction
Table Of Contents
5
Table Of Contents
NETWORK
SYSTEM
126
Network Setting
126
127
130
131
133
Connecting to a Wired Network
Wired Network Settings
Connecting to a Wireless Network
Wireless Network Setting
WPS(PBC)
134
Network Status
135
MagicInfo Lite Settings
136
Wi-Fi Direct
136
Soft AP
137
AllShare Settings
137
Using the AllShare Play Function
138
Device Name
139
Setup
140
Multi Control
140
Configuring settings for Multi Control
141
Time
141
142
142
143
143
Clock
Sleep Timer
On Timer
Off Timer
Holiday Management
144
Menu Language
144
Rotate Menu
145
Eco Solution
145
145
145
146
Energy Saving
Eco Sensor (Off / On)
No Signal Power Off
Auto Power Off (Off / On)
Table Of Contents
6
Table Of Contents
146
Caption
146
146
147
Caption
Caption Mode
Digital Caption Options
148
Security
148
148
149
151
Safety Lock (Off / On)
Button Lock (Off / On)
Program Rating Lock (Off / On)
Change PIN
151
PIP
152
Auto Protection Time
153
Screen Burn Protection
153
154
154
155
Pixel Shift
Timer
Immediate Display
Side Gray
155
Ticker
156
Video Wall
156
156
157
157
157
Video Wall
Format
Horizontal
Vertical
Screen Position
158
Source AutoSwitch Settings
Table Of Contents
7
Table Of Contents
SUPPORT
159
General
159
159
160
160
160
160
160
161
161
161
161
Max. Power Saving
Game Mode
BD Wise
Menu Transparency
Sound Feedback
Auto Power
Standby Control
Lamp Schedule
OSD Display
Power On Adjustment
Temperature Control
162
Anynet+ (HDMI-CEC)
162
163
Anynet+ (HDMI-CEC)
Auto Turn Off (No / Yes)
165
DivX® Video On Demand
165
Reset System
166
Reset All
166
PC Module Power
166
166
Synced Power-On
Synced Power-Off
167
Software Update
167
167
By USB
Alternative Software
167
Contact Samsung
169
Contents Home
169
170
171
171
172
Channel List
Channel Manager
MagicInfo Lite
AllShare Play
Source
Table Of Contents
8
Table Of Contents
ALLSHARE PLAY
MAGICINFO LITE
173
What is AllShare Play?
173
175
176
177
Read the following before using AllShare Play
with a USB device
Using a USB device
Connecting to a PC over a network
Using the DLNA features
178
Using the Basic AllShare Play Features
178
179
179
180
Sorting the file lists
Playing Selected Files
Copying Files
Creating a Playlist (Playlist)
181
My List
181
My List options
182
Videos
182
Playing a Video
183
Photos
183
Viewing a Photo (or Slide Show)
184
Music
184
Playing Music
185
Videos / Photos / Music Play Option
menu
187
Supported Subtitle and AllShare Play file
formats
187
187
187
188
Subtitle
Supported image resolutions
Supported music file formats
Supported Video Formats
190
File Formats Compatible with MagicInfo
Lite Player
191
Contents
Table Of Contents
9
Table Of Contents
TROUBLESHOOTING
GUIDE
195
MagicInfo Lite Player
195
200
201
202
Network Schedule
Local Schedule
Internal AutoPlay
USB AutoPlay
203
Local Schedule Manager
203
207
209
210
211
212
214
Registering a Local Schedule
Modifying a Local Schedule
Deleting a Local Schedule
Running a Local Schedule
Stopping a Local Schedule
Viewing the details of a Local Schedule
Copying a Local Schedule (Local Schedule)
216
Content Manager
216
217
Copying content
Deleting content
218
Settings
218
218
218
218
219
219
219
Content Default Duration
Content Ratio
Image Effect
Default Content
Screen Layout
Delete All Content
Safety Remove USB
220
When Content is Running
220
221
Viewing the details of the content that is running
Changing the settings for the content that is
running
222
Requirements Before Contacting
Samsung Customer Service Center
222
222
223
Testing the Product
Checking the Resolution and Frequency
Check the followings.
226
Q&A
Table Of Contents
10
Table Of Contents
SPECIFICATIONS
APPENDIX
228
General
230
PowerSaver
231
Standard Signal Mode Table
233
License
234
Contact SAMSUNG WORLD WIDE
236
Responsibility for the Pay Service (Cost
to Customers)
236
236
236
Not a product defect
A Product damage caused by customer's fault
Others
237
Optimum Picture Quality and Afterimage
Burn-in Prevention
237
238
Optimum Picture Quality
Prevention of Afterimage Burn-in
240
Terminology
INDEX
Table Of Contents
11
Before Using the Product
Copyright
The contents of this manual are subject to change without notice to improve quality.
© 2012 Samsung Electronics
Samsung Electronics owns the copyright for this manual.
Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is
prohibited.
The SAMSUNG and SyncMaster logos are registered trademarks of Samsung Electronics.
Microsoft and Windows are registered trademarks of Microsoft Corporation.
VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association.
Ownership of all other trademarks is attributed to their due owner.
Before Using the Product
12
Before Using the Product
Cleaning
Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched.
Take the following steps when cleaning.
The following images are for reference only. Real-life situations may differ from what is shown in the
images.
1.
Power off the product and computer.
2.
Disconnect the power cord from the product.
Hold the power cable by the plug and do not touch the cable with wet
hands. Otherwise, an electric shock may result.
3.
Wipe the product with a clean, soft and dry cloth.

Do not use detergents that contain alcohol, solvent or
surface-active agents.
!

Do not spray water or detergent directly on the product.
4.
Wet a soft and dry cloth in water and wring thoroughly to clean the exterior
of the product.
5.
Connect the power cord to the product when cleaning is finished.
6.
Power on the product and computer.
Storage
High-glossy models can develop white stains on the surface if an ultrasonic wave humidifier is used
nearby.
Contact Customer Service Center if the inside of the product needs cleaning (service fee will be
charged).
Before Using the Product
13
Before Using the Product
Safety Precautions
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR
BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO
QUALIFIED PERSONNEL.
This symbol indicates that high voltage is present inside. It is dangerous to
make any kind of contact with any internal part of this product.
This symbol alerts you that important literature concerning operation and
maintenance has been included with this product.
Symbols
Warning
A serious or fatal injury may result if instructions are not followed.
Caution
Personal injury or damage to properties may result if instructions are
not followed.
Activities marked by this symbol are prohibited.
Instructions marked by this symbol must be followed.
Before Using the Product
14
Before Using the Product
Electricity and Safety
The following images are for reference only. Real-life situations may differ from what is shown in the
images.
Warning
Do not use a damaged power cord or plug, or a loose power socket.

An electric shock or fire may result.
Do not use multiple products with a single power socket.

Overheated power sockets may cause a fire.
Do not touch the power plug with wet hands. Otherwise, an electric shock may
result.
Insert the power plug all the way in so it is not loose.

An unsecure connection may cause a fire.
!
Connect the power plug to a grounded power socket (type 1 insulated devices
only).
!

An electric shock or injury may result.
Do not bend or pull the power cord with force. Be careful not to leave the power
cord under a heavy object.

Damage to the cord may result in a fire or electric shock.
Do not place the power cord or product near heat sources.

A fire or electric shock may result.
Clean any dust around the pins of the power plug or the power socket with a dry
cloth.
!

A fire may result.
Before Using the Product
15
Before Using the Product
Caution
Do not disconnect the power cord while the product is being used.

The product may become damaged by an electric shock.
Only use the power cord provided with your product by Samsung. Do not use the
power cord with other products.

!
A fire or electric shock may result.
Keep the power socket where the power cord is connected unobstructed.

The power cord must be disconnected to cut off power to the product when
an issue occurs.
!

Note that the product is not completely powered down by using only the
power button on the remote.
Hold the plug when disconnecting the power cord from the power socket.

An electric shock or fire may result.
!
Installation
Warning
DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP
OF THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES.

A fire may result.
Have a technician install the wall-mount hanger.
!

Installation by an unqualified person can result in an injury.

Only use approved cabinets.
Do not install the product in poorly ventilated spaces such as a bookcase or
closet.

An increased internal temperature may cause a fire.
Install the product at least 10 cm away from the wall to allow ventilation.

An increased internal temperature may cause a fire.
!
Before Using the Product
16
Before Using the Product
Keep the plastic packaging out of the reach of children.

Children may suffocate.
!
Do not install the product on an unstable or vibrating surface (insecure shelf,
sloped surface, etc.)

The product may fall and become damaged and/or cause an injury.

Using the product in an area with excess vibration may damage the product
or cause a fire.
Do not install the product in a vehicle or a place exposed to dust, moisture (water
drips, etc.), oil, or smoke.
!

A fire or electric shock may result.
Do not expose the product to direct sunlight, heat, or a hot object such as a
stove.

The product lifespan may be reduced or a fire may result.
Do not install the product within the reach of young children.

The product may fall and injure children.

As the front is heavy, install the product on a flat and stable surface.
Bend and keep part of the outdoor TV antenna cable hanging downwards (the
part inside the room) to prevent rainwater from entering the product.
!

If rainwater enters the product, a fire or electric shock can occur.
When using an outdoor antenna, be sure to install the antenna away from nearby
power lines to prevent the antenna from collapsing onto them in strong winds.
!

A collapsed antenna can cause an electric shock or injury.
Edible oil, such as soybean oil, can damage or deform the product. Do not install
the product in a kitchen or near a kitchen counter.
Before Using the Product
17
Before Using the Product
Caution
Do not drop the product while moving.

Product failure or personal injury may result.
!
Do not set down the product on its front.

The screen may become damaged.
When installing the product on a cabinet or shelf, make sure that the bottom
edge of the front of the product is not protruding.

The product may fall and become damaged and/or cause an injury.

Install the product only on cabinets or shelves of the right size.
Set down the product gently

Product failure or personal injury may result.
!
SAMSUNG
!
Installing the product in an unusual place (a place exposed to a lot of fine
particles, chemical substances or extreme temperatures, or an airport or train
station where the product should operate continuously for an extended period of
time) may seriously affect its performance.

Be sure to consult Samsung Customer Service Center if you want to install
the product at such a place.
Operation
Warning
There is a high voltage inside the product. Never disassemble, repair or modify
the product yourself.

A fire or electric shock may result.

Contact Samsung Customer Service Center for repairs.
Before moving the product, turn off the power switch and disconnect the power
cord, antenna cable and all other connected cables.
!

Damage to the cord may result in a fire or electric shock.
Before Using the Product
18
Before Using the Product
If the product generates abnormal sounds, a burning smell or smoke, disconnect
the power cord immediately and contact Samsung Customer Service Center.

!
An electric shock or fire may result.
Do not let children hang from the product or climb on top of it.

Children may become injured or seriously harmed.
If the product is dropped or the outer case is damaged, turn off the power switch
and disconnect the power cord. Then contact Samsung Customer Service
Center.

Continued use can result in a fire or electric shock.
Do not leave heavy objects or items that children like (toys, sweets, etc.) on top of
the product.

The product or heavy objects may fall as children try to reach for the toys or
sweets resulting in a serious injury.
During a lightning or thunderstorm, power off the product and remove the power
cable.

!
A fire or electric shock may result.
Do not drop objects on the product or apply impact.

A fire or electric shock may result.
!
Do not move the product by pulling the power cord or any cable.

Product failure, an electric shock or fire may result from a damaged cable.
If a gas leakage is found, do not touch the product or power plug. Also, ventilate
the area immediately.
!
GAS

Sparks can cause an explosion or fire.
Do not lift or move the product by pulling the power cord or any cable.

Product failure, an electric shock or fire may result from a damaged cable.
Do not use or keep combustible spray or an inflammable substance near the
product.
!

An explosion or fire may result.
Before Using the Product
19
Before Using the Product
Ensure the vents are not blocked by tablecloths or curtains.

100
An increased internal temperature may cause a fire.
Do not insert metallic objects (chopsticks, coins, hairpins, etc) or objects that
burn easily (paper, matches, etc) into the product (via the vent or input/output
ports, etc).

Be sure to power off the product and disconnect the power cord when water
or other foreign substances have entered the product. Then contact
Samsung Customer Service Center.

Product failure, an electric shock or fire may result.
Do not place objects containing liquid (vases, pots, bottles, etc) or metallic
objects on top of the product.

Be sure to power off the product and disconnect the power cord when water
or other foreign substances have entered the product. Then contact
Samsung Customer Service Center.

Product failure, an electric shock or fire may result.
Caution
Leaving the screen fixed on a stationary image for an extended period of time
may cause afterimage burn-in or defective pixels.

!
Activate power-saving mode or a moving-picture screen saver if you will not
be using the product for an extended period of time.
-_!
Disconnect the power cord from the power socket if you do not plan on using the
product for an extended period of time (vacation, etc).

Dust accumulation combined with heat can cause a fire, electric shock or
electric leakage.
Use the product at the recommended resolution and frequency.

Your eyesight may deteriorate.
!
Do not hold the product upside-down or move it by holding the stand.

The product may fall and become damaged or cause an injury.
Before Using the Product
20
Before Using the Product
Looking at the screen too close for an extended period of time can deteriorate
your eyesight.
!
Do not use humidifiers or stoves around the product.

A fire or electric shock may result.
Rest your eyes for more than 5 minutes for every 1 hour of product use.

Eye fatigue will be relieved.
!
Do not touch the screen when the product has been turned on for an extended
period of time as it will become hot.
Store small accessories out of the reach of children.
!
Exercise caution when adjusting the product angle or stand height.
!

Your hand or finger may get stuck and injured.

Tilting the product at an excessive angle may cause the product to fall and
an injury may result.
Do not place heavy objects on the product.

Product failure or personal injury may result.
When using headphones or earphones, do not turn the volume too high.

Having the sound too loud may damage your hearing.
Be careful that children do not place the battery in their mouths when removed
from the remote control. Place the battery in a location that children or infants
cannot reach.

If children have had the battery in their mouths, consult your doctor
immediately.
Use only the specified standardized batteries, and do not use a new battery and
a used battery at the same time.

Otherwise, the batteries may be damaged or cause fire, personal injury or
damage due to a leakage of the internal liquid.
Before Using the Product
21
Before Using the Product
When replacing the battery, insert it with the right polarity (+, -).

Otherwise, the battery may become damaged or it may cause fire, personal
injury or damage due to leakage of the internal liquid.
!
The batteries (and rechargeable batteries) are not ordinary refuse and must be
returned for recycling purposes. The customer is responsible for returning the
used or rechargeable batteries for recycling.
!

The customer can return used or rechargeable batteries to a nearby public
recycling center or to a store selling the same type of the battery or
rechargeable battery.
Before Using the Product
22
1
1.1
Preparations
Checking the Contents
The appearance of the actual product may differ from the images shown.
1.1.1 Removing the Packaging (for DE40C and DE46C models only)
1
Open the packaging box. Be careful not to damage the product when you open the packaging with
a sharp instrument.
2
Remove the styrofoam from the product.
3
Check the product and remove the styrofoam and plastic bag.
The appearance of the actual product may differ from the image shown.
This image is for reference only.
4
Store the box in a dry area so that it can be used when moving the product in the future.
1 Preparations
23
1
Preparations
1.1.2 Removing the Packaging (for DE55C models only)
1
Remove the black locking device at the bottom of the box.
1
2
2
Using the grooves in the box, lift and remove the top of the box.
3
Check the components and remove the styrofoam and plastic bag.
3
The appearance of actual components may differ from the image shown.
This image is for reference only.
4
Store the box in a dry area so that it can be used when moving the product in the future.
1 Preparations
24
1.1.3 Checking the Components

Contact the vendor where you purchased the product if any components are missing.

The appearance of the components and items sold separately may differ from the image shown.

A stand is not provided with the product. To install a stand, you can purchase one separately.
Components
Components may differ in different locations.
Quick setup guide
Warranty card
User manual
(Not available in some locations)
MagicInfo Lite Edition
Software CD
Holder-Wire stand
Holder-Ring (4EA)
+
-
1
Preparations
+
Power cord
Remote Control
Batteries
(Not available in some locations)
D-SUB cable
1 Preparations
25
1
Preparations
Items sold separately

The stand is not supplied.

The following items can be purchased at your nearest retailer.
Wall-mount Kit
Stand
RS232C-Stereo cable
DVI cable
HDMI-DVI cable
DP cable
HDMI cable
Video cable
Component cable
Stereo cable
AV cable
RCA stereo cable
External sensor Kit
Network Box
PIM
LAN cable
AV/Component Adapter
AUDIO Adapter
1 Preparations
26
1
Preparations
RS232C(OUT) Adapter
RS232C(IN) Adapter
The RS232C adapter can be used to connect to another monitor using the D-SUB (9-pin) type RS232C
cable. Ensure you connect each of the adapters to the correct RS232C IN or OUT port on the product.
1 Preparations
27
1
1.2
Preparations
Parts
1.2.1 Control Panel
Panel Key
POWER
Remote sensor
Speaker
Panel Key
Buttons
Description
Power on the product.
If you press the [
] button when the product is turned on, the control
menu will be displayed.
To exit the OSD menu, press and hold the panel key for at least one
second.
Move to the upper or lower menu. You can also adjust the value of an
option.
In TV mode, you can change the channel by moving the panel key up
or down when the control menu is not displayed.
Move to the left or right menu.
You can adjust the volume by moving the panel key left or right when
the control menu is not displayed.
Remote sensor
To control the remote control in front of the product, lower the remote
control sensor in the direction of the arrow.
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
1 Preparations
28
1
Preparations
Control menu
If you press the [
] button on the panel key ("1.2 Parts") when the product is turned on, the control
menu will be displayed.
CONTENT
Return
Icons
Description
Select the connected input source.
Move the panel key right to select Source [
] in the control menu.
When the list of input sources is displayed, move the panel key up or
down to select the desired input source. Next, press the panel key.
Display the OSD menu.
Move the panel key left to select menu [
] in the control menu.
The OSD control screen will appear. Move the panel key right to select the
desired menu. You can select a sub-menu item by moving the panel key up,
down, left, or right. To change settings, select the desired menu and press
the panel key.
Enter Contents Home mode.
CONTENT
Move the panel key up to select Contents Home [
CONTENT
] in the control menu.
Power off the product.
Move the panel key down to select Power off [
Next, press the panel key.
] in the control menu.
Exit the control menu.
1 Preparations
29
1
Preparations
1.2.2 Reverse Side
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
RS232C IN
RS232C
OUT
IR /
AMBIENT
SENSOR IN
AUDIO
OUT
RGB / DVI /
HDMI / AV /
COMPONENT
AUDIO IN
USB
USB
POWER
DP IN
HDMI IN
DVI IN
DP OUT
ANT IN
RGB IN
Port
IR
COMPONENT IN OUT
RJ45
Description
[RS232C IN]
Connects to MDC using an RS232C-stereo cable.
[RS232C OUT]
[IR / AMBIENT SENSOR IN]
Supplies power to the external sensor board or receives the light
sensor signal.
[AUDIO OUT]
Connects to the audio of a source device.
[RGB / DVI / HDMI / AV /
COMPONENT AUDIO IN]
Connect to audio input using an audio cable.
[USB
USB memory device port.
]
[DP IN]
Connects to a PC using a DP cable.
[HDMI IN]
Connects to a source device using an HDMI cable.
[DVI IN]
Connects to a source device using a DVI cable or HDMI-DVI cable.
[DP OUT]
Connects to another product using a DP cable.
[ANT IN]
Connect to an antenna cable.
[RGB IN]
Connects to a source device using the D-SUB cable.
[AV IN / COMPONENT IN]
Connects to a source device using the AV/component adapter.
1 Preparations
30
1
Preparations
Port
Description
[IR OUT]
Receives the remote control signal via the external sensor board and
outputs the signal via LOOPOUT.
[RJ45]
Connects to MDC using a LAN cable.
Assembling the Holder-Wire stand
1.2.3 Anti-theft Lock

An anti-theft lock allows you to use the product securely even in public places.

The locking device shape and locking method depend on the manufacturer. Refer to the user
guide provided with your anti-theft locking device for details.
To lock an anti-theft locking device
1
Fix the cable of your anti-theft locking device to a heavy object
such as a desk.
2
3
Put one end of the cable through the loop on the other end.
Insert the locking device into the anti-theft lock slot at the back of
the product.
4
Lock the locking device.

An anti-theft locking device can be purchased separately.

Refer to the user guide provided with your anti-theft locking
device for details.

Anti-theft locking devices can be purchased at electronics
retailers or online.

Stand: Sold separately
1 Preparations
31
1
Preparations
1.2.4 Remote Control

Using other display devices in the same space as the remote control of this product can cause the
other display devices to be inadvertently controlled.

Remote control button functions may differ for different products.
Power on the product.
Power off the product.
Enter the password in the OSD menu,
or change the channel.
Press to select additional
channels (digital) being broadcasted by the
same station. For example, to select channel
“54-3”, press “54”, then press “-” and “3”.
Adjust the volume.
Mute the sound.
Unmuting the sound: Press MUTE again or
press the volume control (+ VOL -) button.
Displays the Content View, which includes
Channel List, Channel Manager, MagicInfo Lite,
AllShare Play and Source.
Change the channel in TV mode.
Select a connected source device.
MagicInfo Lite Launch Button.
Display or hide the onscreen display menu,
or return to the previous menu.
Quickly select frequently used functions.
Temporarily turn off the video and mute the audio.
Disabling the BLANK function
- Press BLANK one more time.
- Press SOURCE.
- Turn the product off and then on again.
Display information on the screen.
Move to the upper, lower, left or right
menu, or adjust an option's setting.
Confirm a menu selection.
Return to the previous menu.
Not available.
MagicInfo Quick Launch Button.
MagicInfo can only be enabled when
a network box is connected.
This button is disabled for products
that do not support MagicInfo.
Exit the current menu.
In TV mode, settings for various functions can be configured
such as the program guide for digital channels. For other modes
(except for TV mode), source devices can be selected manually.
When using a media-related menu or the HDMI-CEC menu,
a function can be selected by pressing a color button on
the remote control that corresponds to a button of
the same color on the screen.
It sets safe lock function.
Use these buttons in Videos,
Photos, Music and Anynet+ modes.
1 Preparations
32
1
Preparations
Adjusting the OSD with the Remote Control
1.
Open the OSD menu.
2.
Select from Picture, Sound, Channel, Network, System or
Support in the displayed OSD menu screen.
3.
Change settings as desired.
4.
Finish setting.
5.
Close the onscreen display (OSD) menu.
To place batteries in the remote control
1
2
3
1 Preparations
33
Remote Control Reception Range
7m ~ 10m
1
Preparations
Use the remote control within 7m to 10m from the sensor on the product at an angle of 30˚ from the left
and right.

Store used batteries out of reach of children and recycle.

Do not use a new and used battery together. Replace both batteries at the same time.

Remove batteries when the remote control is not to be used for an extended period of time.
1 Preparations
34
1
Preparations
1.2.5 Connection Using an IR Stereo Cable
Turn off the device before connecting the External Sensor Kit. After it is connected, turn on the device.
Controlling more than one display product using your remote control
1
2
IR OUT
IR/
AMBIENT
SENSOR IN

Connect the [IR OUT] port on the product to the [IR / AMBIENT SENSOR IN] port on the other
display product using the dedicated stereo cable.

A command sent from the remote control pointed at product 1 will be received by both display
products 1 and 2 .
The appearance may differ depending on the product.
Controlling more than one display product using an external sensor kit (sold separately)
IR/
AMBIENT
SENSOR IN
1
2
IR OUT
IR/
AMBIENT
SENSOR IN
POWER
SOURCE

A command sent from the remote control pointed at product 1 (to which the external sensor kit is
connected) will be received by both display products 1 and 2 .
The appearance may differ depending on the product.
1 Preparations
35
1
1.3
Preparations
Before Installing the Product (Installation Guide)
To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the
installation instructions.

Ensure that an authorized installation company installs the wall mount.

Otherwise, it may fall and cause personal injury.

Make sure to install the specified wall mount.
1.3.1 Tilting Angle and Rotation
Contact Samsung Customer Service Center for further details.
15 A The product can be tilted at a maximum angle of 15 from a perpendicular wall surface.
B To use the product vertically (portrait), turn it clockwise so that the LED is pointing down.
1 Preparations
36
1
Preparations
1.3.2 Ventilation
1. Installation on a Perpendicular Wall
A Minimum 40 mm
B Ambient temperature: Under 35 C

When installing the product on a perpendicular wall, allow
at least 40 mm of space between the product and wall
surface for ventilation and ensure that the ambient
temperature is kept below 35 C.
A
B
Figure 1.1 Side view
2. Installation on an Indented Wall
Contact Samsung Customer Service Center for further details.
Figure 1.3 Top view
B
D
A
D
Plane view
A Minimum 40 mm
B Minimum 70 mm
C Minimum 50 mm
C
E
D Minimum 50 mm
E Ambient temperature: Under 35 C
Figure 1.2 Side view
When installing the product on an indented wall, allow at least the space specified above between the
product and wall for ventilation and ensure that the ambient temperature is kept below 35 C.
1 Preparations
37
1
1.4
Preparations
Dimensions
5
1
2
4
3
Unit: mm (inches)
Model
name
1
2
3
4
5
DE40C
919.6 (36.2)
885.6 (34.9)
498.2 (19.6)
532.0 (20.9)
35.1 (1.38)
DE46C
1054.5 (41.52)
1018.1 (40.1)
572.7 (22.5)
608.5 (24.0)
35.1 (1.38)
DE55C
1249.5 (49.19)
1209.6 (47.6)
680.4 (26.8)
721.0 (28.4)
35.1 (1.38)
All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice.
Refer to the dimensions prior to performing installation of your product. Not responsible for
typographical or printed errors.
1 Preparations
38
1
1.5
Preparations
Installing the Wall Mount
1.5.1 Preparing before installing Wall-Mount
To install a wall-mount from another manufacturer, use the
Holder-Ring.
1
1.5.2 Installing the Wall Mount Kit
The wall mount kit (sold separately) allows you to mount the product on the wall.
For detailed information on installing the wall mount, see the instructions provided with the wall mount.
We recommend you contact a technician for assistance when installing the wall mount bracket.
Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if
you elect to install the wall mount on your own.
1.5.3 Wall Mount Kit Specifications (VESA)
Install your wall mount on a solid wall perpendicular to the floor. Before attaching the wall mount to
surfaces other than plaster board, please contact your nearest dealer for additional information. If you
install the product on a slanted wall, it may fall and result in severe personal injury.
1 Preparations
39
1
Preparations

Standard dimensions for wall mount kits are shown in the table
below.

Samsung wall mount kits contain a detailed installation manual
and all parts necessary for assembly are provided.

Do not use screws that do not comply with the VESA standard
screw specifications.

Do not use screws that are longer than the standard length or
do not comply with the VESA standard screw specifications.
Screws that are too long may cause damage to the inside of the
product.

For wall mounts that do not comply with the VESA standard
screw specifications, the length of the screws may differ
depending on the wall mount specifications.

Do not fasten the screws too firmly. This may damage the
product or cause the product to fall, leading to personal injury.
Samsung is not liable for these kinds of accidents.

Samsung is not liable for product damage or personal injury
when a non-VESA or non-specified wall mount is used or the
consumer fails to follow the product installation instructions.

Do not mount the product at more than a 15 degree tilt.

Always have two people mount the product on a wall.
Unit: mm (inches)
Model name
VESA screw hole specs (A * B)
in millimeters
DE40C
200 x 200 (7.9 x 7.9)
DE46C, DE55C
400 x 400 (15.7 x 15.7)
Standard Screw
Quantity
M8, L20
4
Do not install your Wall Mount Kit while your product is turned on. It may result in personal injury due to
electric shock.
1 Preparations
40
1
1.6
Preparations
Remote Control
1.6.1 Cable Connection
RS232C Cable

Interface
RS232C (9 pins)
Pin
TxD (No. 2), RxD (No. 3), GND (No. 5)
Bit rate
9600 bps
Data bits
8 bit
Parity
None
Stop bit
1 bit
Flow control
None
Maximum length
15m (only shielded type)
Pin assignment
1 2 3 4 5
6 7 8 9
Pin
Signal
1
Detect data carrier
2
Received data
3
Transmitted data
4
Prepare data terminal
5
Signal ground
6
Prepare data set
7
Send request
8
Clear to send
9
Ring indicator
1 Preparations
41
1
Preparations

RS232C cable
Connector: 9-Pin D-Sub to Stereo Cable
9
3
2
1
5
-P2-
6
1
-P1-
-P1-
Female
-P1-
-P2-
-P2-
Rx
2
-------->
1
Tx
Tx
3
<--------
2
Rx
Gnd
5
---------
3
Gnd
STEREO
PLUG
(3.5ø)
LAN Cable

Pin assignment
1 2 3 4 5 6 7 8
Pin No.
Standard Color
Signal
1
White and orange
TX+
2
Orange
TX-
3
White and green
RX+
4
Blue
NC
5
White and blue
NC
6
Green
RX-
7
White and brown
NC
8
Brown
NC
1 Preparations
42
1
Preparations

Connector: RJ45
Direct LAN cable (PC to HUB)
HUB
P2
RJ45 MDC
P1
P1
P2
Signal
P1
TX+
1
TX-
RJ45 MDC
P2
Signal
<-------->
1
TX+
2
<-------->
2
TX-
RX+
3
<-------->
3
RX+
RX-
6
<-------->
6
RX-
Cross LAN cable (PC to PC)
RJ45 MDC
P1
P2
Signal
P1
P2
Signal
TX+
1
<-------->
3
RX+
TX-
2
<-------->
6
RX-
RX+
3
<-------->
1
TX+
RX-
6
<-------->
2
TX-
1 Preparations
43
1
Preparations
1.6.2 Connection

Connection 1
RS232C
IN

RS232C
OUT
IN
RS232C
OUT
IN
RS232C
OUT
IN
OUT
Connection 2
RJ45
RJ45
1 Preparations
44
1
Preparations

Connection 3
RJ45
RS232C
OUT
RS232C
IN
RS232C
OUT
IN
RS232C
OUT
IN
OUT
1 Preparations
45
1
Preparations
1.6.3 Control Codes
Viewing control state (Get control command)
Header
Command
0xAA
Command
type
Data length
ID
Checksum
0
Controlling (Set control command)
Header
Command
0xAA
Command
type
Data length
Data
1
Value
ID
Checksum
Command
No.
Command type
Command
Value range
1
Power control
0x11
0~1
2
Volume control
0x12
0~100
3
Input source control
0x14
-
4
Screen mode control
0x18
-
5
Screen size control
0x19
0~255
6
PIP on/off control
0x3C
0~1
7
Auto adjustment control
0x3D
0
8
Video wall mode control
0x5C
0~1
9
Safety Lock
0x5D
0~1

Issued IDs can be displayed in hexadecimals. However, ID 0 must be displayed as 0xFF.

All communications take place in hexadecimals. The checksum is calculated by adding up all values
except the header. If a checksum adds up to be more than 2 digits as shown below
(11+FF+01+01=112), the first digit is removed.
E.g. Power On & ID=0
Header
Command
Data length
Data 1
1
"Power"
Data length
Data 1
1
1
ID
0xAA
0x11
Header
Command
Checksum
ID
0xAA
0x11
12
1 Preparations
46
1
Preparations

To control all devices connected by a serial cable simultaneously irrespective of IDs, set the ID as
"0xFE" and transmit commands. Commands will be executed by each device but ACK will not
respond.
Power control

Function
A product can be powered on and off using a PC.

Viewing power state (Get Power ON / OFF Status)
Header
Command
Data length
ID
0xAA

Checksum
0x11
0
Setting power ON/Off (Set Power ON / OFF)
Header
Command
Data length
Data
1
"Power"
ID
0xAA
0x11
Checksum
"Power": Power code to be set on a product
1: Power ON
0: Power OFF

Ack
Header
Command
Data length
Ack/Nak
r-CMD
Val1
3
‘A’
0x11
"Power"
Data length
Ack/Nak
r-CMD
Val1
3
‘N’
0x11
"ERR"
ID
0xAA
0xFF
Checksum
"Power": Power code to be set on a product

Nak
Header
Command
ID
0xAA
0xFF
Checksum
"ERR": A code showing what error has occurred
1 Preparations
47
1
Preparations
Volume control

Function
The volume of a product can be adjusted using a PC.

Viewing volume state (Get Volume Status)
Header
Command
Data length
ID
0xAA

Checksum
0x12
0
Setting the volume (Set Volume)
Header
Command
Data length
Data
1
"Volume"
ID
0xAA
0x12
Checksum
"Volume": Volume value code to be set on a product (0-100)

Ack
Header
Command
Data length
Ack/Nak
r-CMD
Val1
3
‘A’
0x12
"Volume"
ID
0xAA
0xFF
Checksum
"Volume": Volume value code to be set on a product (0-100)

Nak
Header
Command
Data length
Ack/Nak
r-CMD
Val1
3
‘N’
0x12
"ERR"
ID
0xAA
0xFF
Checksum
"ERR": A code showing what error has occurred
1 Preparations
48
1
Preparations
Input source control

Function
The input source of a product can be changed using a PC.

Viewing input source state (Get Input Source Status)
Header
Command
Data length
ID
0xAA

0x14
Checksum
0
Setting the input source (Set Input Source)
Header
Command
0xAA
0x14
Data length
Data
1
"Input
Source"
ID
Checksum
"Input Source": An input source code to be set on a product

0x14
PC
0x18
DVI
0x0C
AV
0x08
Component
0x20
MagicInfo
0x1F
DVI_video
0x40
DTV
0x21
HDMI1
0x22
HDMI1_PC
0x25
DisplayPort

DVI_video and HDMI1_PC cannot be used with the Set command. They only respond to
"Get" commands.

MagicInfo is only available with models that contain the MagicInfo function.

DTV are only available with models that include a TV.
Ack
Header
Command
0xAA
0xFF
Data length
Ack/Nak
r-CMD
Val1
3
‘A’
0x14
"Input
Source"
ID
Checksum
"Input Source": An input source code to be set on a product

Nak
1 Preparations
49
1
Preparations
Header
Command
Data length
Ack/Nak
r-CMD
Val1
3
‘N’
0x14
"ERR"
ID
0xAA
Checksum
0xFF
"ERR": A code showing what error has occurred
Screen

Function
The screen mode of a product can be changed using a PC.
Screen mode cannot be controlled when the Video Wall function is enabled.
This control can only be used on models that include a TV.

Viewing screen status (Get Screen Mode Status)
Header
Command
Data length
ID
0xAA

Checksum
0x18
0
Setting the picture size (Set Picture Size)
Header
Command
0xAA
0x18
Data length
Data
1
"Screen
Mode"
ID
Checksum
"Screen Mode": A code that sets the product status

0x01
16 : 9
0x04
Zoom
0x31
Wide Zoom
0x0B
4:3
Ack
Header
Command
0xAA
0xFF
Data length
Ack/Nak
r-CMD
Val1
3
‘A’
0x18
"Screen
Mode"
Data length
Ack/Nak
r-CMD
Val1
3
‘N’
0x18
"ERR"
ID
Checksum
"Screen Mode": A code that sets the product status

Nak
Header
Command
ID
0xAA
0xFF
Checksum
"ERR": A code showing what error has occurred
1 Preparations
50
1
Preparations
Screen size control

Function
The screen size of a product can be changed using a PC.

Viewing the screen size (Get Screen Size Status)
Header
Command
Data length
ID
0xAA

0x19
Checksum
0
Ack
Header
Command
0xAA
0xFF
Data length
Ack/Nak
r-CMD
Val1
3
‘A’
0x19
"Screen
Size"
ID
Checksum
"Screen Size": product screen size (range: 0 – 255, unit: inch)

Nak
Header
Command
Data length
Ack/Nak
r-CMD
Val1
3
‘N’
0x19
"ERR"
ID
0xAA
0xFF
Checksum
"ERR": A code showing what error has occurred
1 Preparations
51
1
Preparations
PIP On/Off control

Function
The PIP mode of a product can be turned on or off using a PC.


Only available on models that have the PIP function.

The mode cannot be controlled if Video Wall is set to On.

This function is not available in MagicInfo.
Viewing PIP on/off state (Get the PIP ON / OFF Status)
Header
Command
Data length
ID
0xAA

Checksum
0x3C
0
Setting PIP on/off (Set the PIP ON / OFF)
Header
Command
Data length
Data
1
"PIP"
ID
0xAA
0x3C
Checksum
"PIP": A code used to turn the PIP mode of a product on or off
1: PIP ON
0: PIP OFF

Ack
Header
Command
Data length
Ack/Nak
r-CMD
Val1
3
‘A’
0x3C
"PIP"
ID
0xAA
0xFF
Checksum
"PIP": A code used to turn the PIP mode of a product on or off

Nak
Header
Command
Data length
Ack/Nak
r-CMD
Val1
3
‘N’
0x3C
"ERR"
ID
0xAA
0xFF
Checksum
"ERR": A code showing what error has occurred
1 Preparations
52
1
Preparations
Auto adjustment control (PC and BNC only)

Function
Automatically adjust the PC system screen using a PC.

Viewing auto adjustment state (Get Auto Adjustment Status)
None

Setting auto adjustment (Set Auto Adjustment)
Header
Command
0xAA
0x3D
Data length
Data
1
"Auto
Adjustment"
ID
Checksum
"Auto Adjustment" : 0x00 (at all times)

Ack
Header
Command
0xAA
0xFF
Data length
Ack/Nak
r-CMD
Val1
3
‘A’
0x3D
"Auto
Adjustment"
ID

Checksum
Nak
Header
Command
Data length
Ack/Nak
r-CMD
Val1
3
‘N’
0x3D
"ERR"
ID
0xAA
0xFF
Checksum
"ERR": A code showing what error has occurred
1 Preparations
53
1
Preparations
Video Wall Mode Control

Function
Video Wall mode can be activated on a product using a PC.
This control is only available on a product whose Video Wall is enabled.
This function is not available in MagicInfo.

Viewing video wall mode (Get Video Wall Mode)
Header
Command
Data length
ID
0xAA

Checksum
0x5C
0
Setting the video wall (Set Video Wall Mode)
Header
Command
0xAA
0x5C
Data length
Data
1
"Video Wall
Mode"
ID
Checksum
"Video Wall Mode": A code used to activate Video Wall mode on a product
1: Full
0: Natural

Ack
Header
Command
0xAA
0xFF
Data length
Ack/Nak
r-CMD
Val1
3
‘A’
0x5C
"Video Wall
Mode"
ID
Checksum
"Video Wall Mode": A code used to activate Video Wall mode on a product

Nak
Header
Command
Data length
Ack/Nak
r-CMD
Val1
3
‘N’
0x5C
"ERR"
ID
0xAA
0xFF
Checksum
"ERR": A code showing what error has occurred
1 Preparations
54
1
Preparations
Safety Lock

Function
PC can be used to turn the Safety Lock function on or off on a product.
This control is available regardless of whether or not the power is turned on.

Viewing the safety lock state (Get Safety Lock Status)
Header
Command
Data length
ID
0xAA

Checksum
0x5D
0
Enabling or disabling safety lock (Set Safety Lock Enable / Disable)
Header
Command
0xAA
0x5D
Data length
Data
"Safety
Lock"
Checksum
1
ID
"Safety Lock": Safety lock code to be set on a product
1: ON
0: OFF

Ack
Header
Command
0xAA
0xFF
Data length
Ack/Nak
r-CMD
Val1
3
‘A’
0x5D
"Safety
Lock"
ID
Checksum
"Safety Lock": Safety lock code to be set on a product

Nak
Header
Command
Data length
Ack/Nak
r-CMD
Val1
3
‘N’
0x5D
"ERR"
ID
0xAA
0xFF
Checksum
"ERR": A code showing what error has occurred
1 Preparations
55
2
2.1
Connecting and Using a Source Device
Before Connecting
Check the following before you connect this product with other devices.
Devices that can be connected to this product include PCs, camcorders, speakers, set top boxes and
DVD/Blu-ray Disc players.
2.1.1 Pre-connection Checkpoints

Before connecting a source device, read the user manual provided with it. The number and locations
of ports on source devices may differ from device to device.

Do not connect the power cable until all connections are completed. Connecting the power cable
during connection may damage the product.

Check the types of ports at the back of the product you want to connect.
2 Connecting and Using a Source Device
56
2
2.2
Connecting and Using a Source Device
Connecting and Using a PC
2.2.1 Connecting to a PC

Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.

A PC can be connected to the product in a variety of ways.
Select a connection method suitable for your PC.
Connecting parts may differ in different products.
Connection using the D-SUB cable (analog type)
RGB IN
RGB / DVI / HDMI /
AV / COMPONENT
AUDIO IN
Connection using a DVI cable (digital type)
DVI IN
RGB / DVI / HDMI /
AV / COMPONENT
AUDIO IN
2 Connecting and Using a Source Device
57
2
Connecting and Using a Source Device
Connection Using an HDMI-DVI Cable
HDMI IN
RGB / DVI / HDMI /
AV / COMPONENT
AUDIO IN
When you connect a PC to the product using an HDMI-DVI cable, set Edit Name to DVI PC to access
video and audio content stored on the PC.
Connection Using an HDMI Cable
HDMI IN
2 Connecting and Using a Source Device
58
2
Connecting and Using a Source Device
Connection Using an DP Cable
DP IN
2 Connecting and Using a Source Device
59
2
Connecting and Using a Source Device
2.2.2 Changing the Resolution
Adjust the resolution and refresh rate in Control Panel on your PC to obtain optimum picture quality.
The picture quality of TFT-LCDs may degrade if the optimum resolution is not selected.
Changing the Resolution on Windows XP
Go to Control Panel
1
Display
Settings, and change the resolution.
3
2
**********
**** ****
Changing the Resolution on Windows Vista
Go to Control Panel
Personal Settings
1
2
3
4
Display Settings, and change the resolution.
***********
***********
2 Connecting and Using a Source Device
60
2
Connecting and Using a Source Device
Changing the Resolution on Windows 7
Go to Control Panel
Display
Screen Resolution, and change the resolution.
1
2
3
4
2 Connecting and Using a Source Device
61
2
2.3
Connecting and Using a Source Device
Connecting an External Monitor
DP OUT
DP IN
The following images are for reference only. Real-life situations may differ from what is shown in the
images.
2 Connecting and Using a Source Device
62
2
2.4
Connecting and Using a Source Device
Connecting to a Video Device

Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.

You can connect a video device to the product using a cable.

Connecting parts may differ in different products.

After connecting a source device, press the SOURCE button on the remote control and
select the connected source device.
2.4.1 Connection Using the AV Cable
RGB / DVI / HDMI /
AV / COMPONENT
AUDIO IN
AV IN
2.4.2 Connection Using the Component Cable
RGB / DVI / HDMI /
AV / COMPONENT
AUDIO IN
COMPONENT IN
2 Connecting and Using a Source Device
63
2
Connecting and Using a Source Device
2.4.3 Connection Using an HDMI-DVI Cable
HDMI IN
RGB / DVI / HDMI /
AV COMPONENT
AUDIO IN

Audio will not be enabled if the product is connected to a video device using an HDMI-DVI cable.
To resolve this, additionally connect an audio cable to the audio ports on the product and video
device. When you connect a video device to the product using an HDMI-DVI cable, set Edit Name
to DVI Device to access video and audio content stored on the video device.

Supported resolutions include 1080p (50/60Hz), 720p (50/60Hz), 480p, and 576p.
2.4.4 Connection Using an HDMI Cable
HDMI IN
Using an HDMI cable or HDMI to DVI Cable (up to 1080p)

For better picture and audio quality, connect to a digital device using an HDMI cable.

An HDMI cable supports digital video and audio signals, and does not require an audio cable.

To connect the product to a digital device that does not support HDMI output, use an HDMI/
DVI and audio cables.

The picture may not display normally (if at all) or the audio may not work if an external device that
uses an older version of HDMI mode is connected to the product. If such a problem occurs, ask the
manufacturer of the external device about the HDMI version and, if out of date, request an upgrade.
2 Connecting and Using a Source Device
64
2
Connecting and Using a Source Device

Be sure to use an HDMI cable with a thickness of 14 mm or less.

Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a connection
error may occur.

A basic high-speed HDMI cable or one with ethernet is recommended. This product does not
support the ethernet function via HDMI.
2.4.5 Connecting to an Audio System
AUDIO OUT
2.4.6 Connecting to an Antenna
VHF/UHF Antenna
ANT IN
The initial settings process runs automatically when the product is turned on for the first time after
purchase.
Take extra care to ensure the wires inside the cable do not bend.
2 Connecting and Using a Source Device
65
2
2.5
Connecting and Using a Source Device
Connecting the network box (Sold separately)
2.5.1
MagicInfo
To use MagicInfo, a network box (sold separately) must be connected to the product.
For details on how to connect to a network box, refer to the user's manual provided with the network
box upon purchase.

To change the MagicInfo settings, run "MagicinfoSetupWizard" on the desktop.

For details on how to use MagicInfo, refer to the DVD provided with the network box.

The information in this section is subject to change without notice for quality improvement.

If a problem occurs after installing an operating system other than the one provided with the
network box, restoring the previous version of the operating system, or installing software that is
not compatible with the operating system provided, you will not be able to benefit from technical
support and will be charged a fee for a visit from a service technician. A product exchange or
refund will also not be available.
Entering MagicInfo mode
1
After installing and connecting the network box (sold separately) to the product, power on the
product.
2
Press SOURCE on the remote control, and select MagicInfo.
Connecting the network box to the [HDMI IN] port on the product will change Source from HDMI
to MagicInfo.
2 Connecting and Using a Source Device
66
2
Connecting and Using a Source Device
3
Select the default application you want to run when MagicInfo starts.
MagicInfo Setup Wizard - v.1.12
Select Application - step 1
MagicInfo Pro (LAN, WAN based version)
MagicInfo-i Premium (Web-based version)
Select Later
< Back(B)
4
Next(N) >
Finish
Cancel
Enter the IP information.
MagicInfo Setup Wizard - v.1.12
Select TCP/IP - step 2
Obtain an IP address automatically
Use the following IP address:
IP address:
192 . 168 . 0 . 102
Subnet mask:
255 . 255 . 255 . 0
Default gateway:
192 . 168 . 0 . 1
Obtain DNS server address automatically
Use the following DNS server address:
Preferred DNS server:
10 . 44 . 33 . 22
Alternate DNS server:
10 . 33 . 22 . 11
< Back(B)
Next(N) >
Finish
Cancel
2 Connecting and Using a Source Device
67
2
Connecting and Using a Source Device
5
Select a language. (The default language is English.)
MagicInfo Setup Wizard - v.1.12
Select Language -step 3
Select the language you want to install on the system for menus and
dialogs.
Current Language
:
Engilsh
Chinese [Traditional]
German
English
French
Italian
Japanese
Korean
Russian
Swedish
Turkish
Chinese [Simplified]
Portuguese
< Back(B)
6
Next(N) >
Finish
Cancel
Select a display mode.
MagicInfo Setup Wizard - v.1.12
Select Screen Type - step 4
Landscape
Portrait
< Back(B)
Next(N) >
Finish
Cancel
2 Connecting and Using a Source Device
68
2
Connecting and Using a Source Device
7
Double-check the settings you have just configured.
MagicInfo Setup Wizard - v.1.12
Setup Information
1. Application :
MagicInfo Pro [LAN,WAN based version\
2. Internet Protocol [TCP/IP]
IP :
192.168.0.102
3. Language :
4. Screen Type :
English
Landscape
Do not show again
< Back(B)
Apply
Finish
Cancel
If the execution icon does not appear, double-click the MagicInfo icon on the desktop. The icon will
appear at the bottom right of the screen.
2 Connecting and Using a Source Device
69
2
2.6
Connecting and Using a Source Device
Changing the Input source
2.6.1
Source
MENU [m]
Support
Contents Home
ENTER [
Source
]
Source allows you to select a variety of sources and change source device names.
Source
You can display the screen of a source device connected to the product. Select a source from Source
List to display the screen of the selected source.
Source
TV
PC
----
HDMI
----
AV
----
Component
----
DisplayPort
----
DVI
----
A
Refresh
Tools
Return
The displayed image may differ depending on the model.
The input source can also be changed by using the SOURCE button on the remote control.
The screen may not display correctly if an incorrect source is selected for the source device you want to
convert to.
2 Connecting and Using a Source Device
70
3
Using MDC
MDC (Multiple Display Control) is an application that allows you to easily control multiple display
devices simultaneously using a PC.
3.1
Configuring Settings for Multi Control
MENU [m]
System
Multi Control
ENTER [
]
Assign an individual ID to your product.
3.1.1 Configuring settings for Multi Control

ID Setup
Assign an ID to a set. (Range: 0~99)
Press

or
to select a number, and press [
].
ID Input
Enter the ID number of the product connected to the input cable for input signal reception.
Enter the number you want using the number buttons on the remote control.

MDC Connection
Select a method to connect to MDC to receive the MDC signal.

RS232C MDC
Communicate with MDC via the RS232C-stereo cable.

RJ45 MDC
Communicate with MDC via the RJ45 cable.

DisplayPort Daisy Chain
To display the [DP IN] video input through the [DP OUT] output port, select a device connection
method from Single Stream Transport (SST) and Multi Stream Transport (MST).

Clone: In this Single Stream Transport (SST) output mode, the same screen output is displayed
on two display devices connected.

-
If Clone is selected, the PC recognizes the two displays as a single monitor.
-
Clone mode is enabled if the input source is a digital input other than DisplayPort, such
as DVI, HDMI, MagicInfo, or PIM.
Expand: In this Multi Stream Transport (MST) mode, a different screen output is displayed on
two display devices connected.
-
If Expand is selected, the PC recognizes the two displays as separate monitors.
-
The mode functions only on a PC that supports DisplayPort 1.2 MST.
-
For Full HD resolution (1920x1080) displays, a maximum of four displays can be
connected.
3 Using MDC
71
3
3.2
Using MDC
MDC Program Installation/Uninstallation
3.2.1 Installation
1
2
Insert the installation CD into the CD-ROM drive.
Click the MDC Unified installation program.
If a software installation window is not displayed on the main screen, install with the MDC Unified
execution file in the MDC folder on the CD.
3
4
5
Select a language for installation. Next, click "OK".
When the "Welcome to the InstallShield Wizard for MDC_Unified" screen appears, click "Next".
In the "License Agreement" window displayed, select "I accept the terms in the license agreement"
and click "Next".
6
7
In the displayed "Customer Information" window, fill out all the information fields and click "Next".
In the displayed "Destination Folder" window, select the directory path you want to install the
program in and click "Next".
If the directory path is not specified, the program will be installed in the default directory path.
8
In the displayed "Ready to Install the Program" window, check the directory path to install the
program in and click "Install".
9
10
Installation progress will be displayed.
Click "Finish" in the displayed "InstallShield Wizard Complete" window.
Select "Launch MDC Unified" and click "Finish" to run the MDC program immediately.
11
The MDC Unified shortcut icon will be created on the desktop after installation.

The MDC execution icon may not be displayed depending on the PC system or product
specifications.

Press F5 if the execution icon is not displayed.
3.2.2 Uninstallation
1
2
Select Settings > Control Panel on the Start menu and double-click Add/Delete Program.
Select MDC Unified from the list and click Change/Remove.
MDC installation can be affected by the graphics card, mother board and network conditions.
3 Using MDC
72
3
3.3
Using MDC
What is MDC?
Multiple display control "MDC" is an application that allows you to easily control multiple display devices
simultaneously using a PC.
3.3.1 Connecting to MDC
Using MDC via RS-232C (serial data communications standards)
An RS-232C serial cable must be connected to the serial ports on the PC and monitor.
RS232C IN / OUT
3 Using MDC
73
3
Using MDC
Using MDC via Ethernet
Enter the IP for the primary display device and connect the device to the PC. One display device can
connect to another using an RS-232C serial cable.
Connection using a direct LAN cable
RJ45
Multiple products can be connected using the [RJ45] port on the product and the LAN ports on the
HUB.
Connection using a cross LAN cable
RS232C OUT
RJ45
Multiple products can be connected using the [RS232C IN / OUT] port on the product.
3 Using MDC
74
3
Using MDC
3.3.2 Connection Management
Connection management includes the Connection list and Connection list modification options.
Connection list - Connection list shows the details of the connections such as connection setting (IP/
COM, Port No, MAC, and Connection Type), connection status, Set ID Range, and detected devices.
Each connection can contain a maximum of 100 devices connected in serial daisy-chain fashion. All the
LFDs detected in a connection are displayed in the Device list, where the user can make groups and
send commands to detected devices.
Connection list modification options - Connection modification options includes Add, Edit, Delete,
and Refresh.
3 Using MDC
75
3
Using MDC
3.3.3
Auto Set ID
Auto Set ID feature assigns a Set ID for all the LFDs connected in daisy-chain of a selected connection.
There can be a maximum of 100 LFDs in a connection. The Set ID is assigned sequentially in the daisychain running from 1 to 99, and then finally to Set ID 0.
3 Using MDC
76
3
Using MDC
3.3.4
Cloning
Using the Cloning feature, you can copy the setting of one LFD and apply it to multiple selected LFDs.
You can select specific tab categories or all tab categories for cloning, using the copy setting option
window.
3 Using MDC
77
3
Using MDC
3.3.5
Command Retry
This feature is used to specify the maximum number of times the MDC command will be retried in case of
there being no reply or a corrupted reply from an LFD. The retry count value can be set using the MDC
options window. The retry count value must be between 1-10. The default value is 1.
3 Using MDC
78
3
Using MDC
3.3.6 Getting Started with MDC
1
To start the program, click Start
2
Click Add to add a display device.

Programs
Samsung
MDC Unified.
If the connection is established via RS232C, go to Serial and specify the COM Port.
3 Using MDC
79
3
Using MDC

If the connection is established via Ethernet, enter the IP that was entered for the display
device.
3 Using MDC
80
3
Using MDC
3.3.7 Main Screen Layout
1
6
5
4
2
3
1
Menu Bar
Change the status of a display device or the properties of the program.
2
Device Category
View a list of connected display devices or device groups.
3
Schedule Category
View a list of schedules for display devices.
4
Set List
Select the display device you want to adjust.
5
Modify the Set List
Add, edit, regroup or delete sets.
6
Help Topics
Display help topics for the program.
3 Using MDC
81
3
Using MDC
3.3.8 Menus
You can power on or off a selected device or change the input source or volume of the device.
Choose display devices from the list of sets, and select the Home tab.
1
Home
Select an item and change the corresponding setting.
Power

On: Power on a selected display.

Off: Power off a selected display.
Input
Input Source : Change the input source.


Input sources available can vary depending on the Display Device Models.

The input source can be changed only for displays that are turned on.
Channel : Change the channel.

2

The TV channel can be changed by using the up/down arrow keys.

The channel can be changed only when the input source is TV.

Only registered channels can be selected.
Volume
The volume can be changed or the sound can be muted only for displays that are turned on.
Volume

The volume can be adjusted using the slider bar in the range of 0 to 100.
Adjust the volume of a selected display.
Mute

Enable or disable Mute for a selected display.
Mute will automatically be disabled if Volume is adjusted when Mute is on.
3 Using MDC
82
3
Using MDC
3

Alert
Fault Device

This menu shows a list of display devices which have following errors - fan error, temperature
error, brightness sensor error, or lamp error.
Select a display device from the list. The Repair button will be enabled. Click the refresh button
to refresh the error status of the display device. The recovered display device will disappear
from the Fault Device List.

Fault Device Alert

Display device in which error is detected will be reported by email.
Fill in all required fields. The Test and OK buttons will be enabled. Ensure the Sender
information and at least one Recipient are entered.
3 Using MDC
83
3
Using MDC
3.3.9 Screen Adjustment
The screen settings (contrast, brightness, etc.) can be adjusted.
Choose display devices from the list of sets, and select the Picture tab.
Custom
Select an item and change the corresponding screen setting.

Color and Tint are not available if the input source is PC.

Red, Green, Blue and PC Screen Adjustment are not available if the input source is Video.

Color, Tint, Color Tone, Color Temp, Red, Green, Blue and PC Screen Adjustment are not
available if both PC Source and Video Source are selected.
Picture Mode

Adjust the picture mode for the selected display device.
Contrast

Adjust the contrast for the selected display device.
Brightness

Adjust the brightness for the selected display device.
Color

Adjust the colors for the selected display device.
Tint (G/R)

Adjust the tint for the selected display device.
Color Tone

Adjust the background color tone for the selected display device.
Color Temp

Adjust the color temperature for the selected display device.
This option is enabled if Color Tone is set to Off.
Red

Customize the intensity of red color for the selected display device.
3 Using MDC
84
3
Using MDC
Green

Customize the intensity of green color for the selected display device.
Blue

Customize the intensity of blue color for the selected display device.
Options
Dynamic Contrast
Adjust the Dynamic Contrast for the selected display device.
Gamma Control
Change the gamma value for the selected display.
Auto Motion Plus
This option is used to view dynamic images.

Off: Disable the Auto Motion Plus function.

Clear: Set the level of Auto Motion Plus to clear. This mode is suitable to display vivid images.

Standard: Set the level of Auto Motion Plus to standard.

Smooth: Set the level of Auto Motion Plus to smooth. This mode is suitable to display smooth
images.

Custom: Customize the level of screen burn-in or flickering.

Demo: This function demonstrates the technology of Auto Motion Plus. The result when the mode
is changed can be previewed on the left side of the window.
Auto Motion Plus may not be available depending on the product.
Brightness Sensor
Enable or disable the Brightness Sensor for the selected display device.
The Brightness Sensor detects the ambient light intensity and automatically adjusts the screen
brightness.
Brightness Sensor may not be available depending on the product.
3 Using MDC
85
3
Using MDC
HDMI Black Level
Adjust the HDMI Black Level for the selected display device.
Size
Picture Size
Adjust the screen size for the selected display device.
The Detail item will be disabled if Picture Size is set to a mode that does not support detailed
configuration.
The -/+ buttons can be used to adjust Zoom.
The screen can be relocated using the up/down/left/right buttons.
Detail
You can view details of the selected screen size.
PC Screen Adjustment
Frequency adjustment or fine-tuning is available by using the -/+ buttons in Coarse or Fine.
To relocate the screen, click one of the four images below Position.
To automatically adjust the frequency, fine-tune or relocate the screen, click Auto Adjustment.
3 Using MDC
86
3
Using MDC
3.3.10 Sound Adjustment
You can change the sound settings.
Choose display devices from the list of sets, and select the Sound tab.
The Bass or Treble item will be disabled if the item is not supported by the selected set.
Bass
Adjust the bass for the selected display.
Treble
Adjust the treble for the selected display.
Balance(L/R)
Adjust the volume of the left and right speakers of the selected display device.
SRS TS XT
Enable or disable the SRS TS XT effect for the selected display device.
3 Using MDC
87
3
Using MDC
3.3.11 System Setup
Choose display devices from the list of sets, and select the System tab.
Video Wall
The Video Wall function can be used to display part of a whole picture or repeat the same picture on
each of connected multiple display devices.
Video Wall is enabled only when devices are in the group.
Video Wall
Enable or disable Video Wall.
Format
Select the format to display the split screen.
Full
Natural
3 Using MDC
88
3
Using MDC
H
Select the number of horizontal display devices.
A maximum of 15 displays can be arranged in a row.
A maximum of 6 can be assigned to V if 15 is assigned to H.
V
Select the number of vertical display devices.
A maximum of 15 displays can be arranged in a row.
A maximum of 6 can be assigned to V if 15 is assigned to H.
Screen Position
View the layout of displays (configured by the screen divider) or change the layout as required.
Screen Position and Preview are enabled when Video Wall is set to on.
Note that if multiple sets are selected, Preview is enabled only if the settings for H and V match the
layout of the selected sets.
To change the Position, select a set and drag it to a new position.
The range of screen divider settings may differ depending on the model.
3 Using MDC
89
3
Using MDC
PIP
Basic information required to adjust PIP will appear in the menu screen.

PIP will be disabled when Video Wall is ON.

Note that Picture Size is disabled when PIP is ON.
PIP Size
View the PIP Size of the current display.
PIP Source
Select a PIP input source.
Sound Select
Select and enable the sound from either the primary screen or secondary screen.
Channel
The channel can be changed if PIP Source is TV.
3 Using MDC
90
3
Using MDC
General
User Auto Color
Automatically adjust the screen colors.
Available only in PC mode.
Auto Power
Set the product to automatically power on.
Standby Control
Set the standby mode to activate if an input source is not detected.
Fan & Temperature
Configure the settings required to detect the fan speed and internal temperature for the product's
protection.
Fan Control
Select a method to configure the fan speed.
Fan Speed
Configure the fan speed.
Temperature
Detect the internal temperature by specifying the range of temperature.
3 Using MDC
91
3
Using MDC
Security
Safety Lock
Lock the on-screen menus.
To unlock the menus, set Safety Lock to Off.
Button Lock
Lock the buttons on the display device.
To unlock the buttons, set Button Lock to Off.
OSD Display
Source OSD
Select whether to display a message when the Source is changed.
Not Optimum Mode OSD
Select whether to display a message when a non-compatible mode is selected.
No Signal OSD
Select whether to display a message when there is no input signal.
MDC OSD
Select whether to display a message when settings are changed by the MDC.
3 Using MDC
92
3
Using MDC
Time
Clock Set
Change the current time on the selected display device according to the time set on a PC.
If the time is not set on the display device, null values will be displayed.
Timer

On Time: Set the time to power on the selected display device.

Off Time: Set the time to power off the selected display device.

Volume: Specify the volume of the display device when it is powered on by On Time.

Source: Specify the input source of the display device when it is powered on by On Time.

Holiday: The Holiday Management settings can be applied to the Timer.

Repeat: Specify the period for which you want to repeat the selected Timer.
3 Using MDC
93
3
Using MDC

Once: Activate the timer only one time.

EveryDay: Activate the timer every day.

Mon~Fri: Activate the timer from Monday through Friday.

Mon~Sat: Activate the timer from Monday through Saturday.

Sat~Sun: Activate the timer on Saturdays and Sundays.

Manual: Customize days of the week.
The checkboxes to select days of the week below Repeat are enabled only if Manual is selected.
Holiday Management
Holiday Management allows you to prevent devices that are set to be powered on by the Timer from
turning on at a specified date.
The Holiday Management function can be enabled or disabled in the Timer settings menu.

Add: You can specify holidays:
Click the Add button in the Holiday Management window.

Delete: Delete holidays. check the corresponding checkboxes and click this button.

List of holidays: View a list of holidays you have added.
3 Using MDC
94
3
Using MDC
Screen Burn Protection
Pixel Shift
Move the screen slightly at specified time intervals to prevent screen burn-in.
Screen Saver
This function prevents screen burn-in when the screen of the selected display device is left idle for an
extended period of time.

Interval: Set the interval to activate the Screen Saver.

Mode: The Time setting can vary for each Mode.
3 Using MDC
95
3
Using MDC
Safety Screen
The Safety Screen function can be used to prevent screen burn-in when a stationary image displays on
the screen of a display device for an extended period of time.
Lamp Control
Lamp Control is used to adjust the backlight to reduce power consumption.
Automatically adjust the backlight of the selected display device at a specified time.
If Manual Lamp Control is adjusted, Auto Lamp Control will automatically switch to Off.
Manually adjust the backlight for the selected display.
If Auto Lamp Control is adjusted, Manual Lamp Control will automatically switch to Off.

Ambient Light: Ambient Light detects ambient light intensity and automatically adjusts the screen
brightness of all the LFDs in the same serial chain.
3 Using MDC
96
3
Using MDC
3.3.12 Tool Settings
1
1
2
3
4
Security
Panel Control
Turn on or off the screen of a display device.
Remote Control
Enable or disable the remote control.
2
Reset
Reset Picture
Reset the screen settings.
Reset Sound
Reset the sound settings.
Reset System
Reset the system settings.
Reset All
Reset the screen, sound and system settings at the same time.
(Menu Language, Security, Time, Multi Control and Anynet+ will not be initialized.)
3 Using MDC
97
3
Using MDC
3
Edit Column
Options
Language: Select a language to use in the MDC program. After selecting a language, restart the MDC
program to use the selected language.
Command Retry Count: Specify the number of retry attempts when a command fails.
Error Status Interval: Specify the time interval to query the display device in order to check if "Fault
Device" has occurred.
Mail Alert Interval: Specify the time interval for email notifications in the event when "Fault Device"
occurs.
3 Using MDC
98
3
Using MDC
Edit Column
Select the items you want to display in the list of sets.
4
Information
View the program information.
3 Using MDC
99
3
Using MDC
3.3.13 Other Functions
Resizing a Window
Place the mouse pointer on a corner of the program window. An arrow will appear. Move the arrow to
customize the size of the program window.
3 Using MDC
100
3
Using MDC
Group Management
Creating Groups
Create groups and manage the list of sets on a group basis.
Duplicate group names cannot be used.
1
Right-click and select Group
Edit in the display device list section on the left side of the program
window.
2
In the Edit Group window displayed, click Add on the same level or Add on the sub level.

Add on the same level: Create a group on the same level as the selected group.
The Add on the same level button is enabled only if at least one group is created.
3 Using MDC
101
3
Using MDC

3
Add on the sub level: Create a sub-group under the selected group.
Enter the group name.
Deleting Groups
1
2
Select a group name, and click Edit.
3
Click Yes. The group will be deleted.
In the Edit Group window displayed, click Delete.
Renaming Groups
1
2
Select a group name, and click Edit.
In the Edit Group window displayed, click Rename.
Rename
3
If a cursor appears in the old group name, enter a new group name.
3 Using MDC
102
3
Using MDC
Schedule Management
Creating Schedules
Create and register a schedule on a group basis.
1
Click All Schedule List in the schedule section on the left side of the program window. The Add
button will be enabled in the middle.
2
Click the Add button. The Add Schedule window will appear.
3 Using MDC
103
3
Using MDC
3
Click Add below the Device Group item, and select the group you want to add a schedule to.
4
Select Date&Time/Action and click OK. The schedule will be added and a list of schedules will
appear in the set list window.

Device Group: Select a group.

Date&Time


Instant Execution: Run the schedule immediately.

Timer: Set the date, time and interval to run the schedule.
Action: Select a function that will activate at the specified time and interval.
Schedule Modification
To modify a schedule, select the schedule and click Edit.
Deleting a Schedule
To delete a schedule, select the schedule and click Delete.
3 Using MDC
104
3
Using MDC
3.3.14 Troubleshooting Guide
Issue
The display you want to control
does not appear on the system
information chart.
Solution
1.
Check the connection of the RS232C cable (check that the
cable is properly connected to appropriate serial port).
2.
Check that another display with a duplicate ID is not
connected. Connecting displays with a duplicate ID can
cause the displays not to be shown due to data collision.
3.
Check that the display ID is within the range of 0 and 99.
(Change the ID using the Display menu.)
For a display that supports the ID in a range of 0 to 99,
the ID should be set between 0 and 99.
The display you want to control
does not appear on the other
Control Info Grids.
Check that the display is powered on. (See the power status in
the system information chart.)
The following message appears
repeatedly.
Check that the display you want to control is selected.
Displays power on or off at different
time from one another even though
On Time or Off Time is set.
Adjust the time on the PC to synchronize the time between the
connected displays.
The remote control does not work.
The remote control may not work if the RS-232C cable is
removed or the program is closed abnormally while the Remote
Control function is Disable. To resolve this, run the program
again and set Remote Control to Enable.
Ensure you select the input source the display is connected to.
This program may malfunction sometimes due to a communication problem between the PC and
display or electromagnetic waves emitted from nearby electronic devices.
3 Using MDC
105
3
Using MDC
How display properties are shown when multiple displays are used
1
2
3
When no display is selected: The default value is displayed.
When one display is selected: Settings for the selected display are displayed.
When two displays are selected (e.g. in sequence of ID 1 and ID 3): The settings for ID 1 are
displayed before the settings for ID 3.
4
When the All+Select checkbox is checked and all displays are selected: The default settings are
displayed.
3 Using MDC
106
4
Screen Adjustment
Configure the Picture settings (Brightness, Color Tone, etc.).
The layout of the Picture menu options may vary depending on the product.
4.1
Picture Mode
MENU [m]
Picture
Picture Mode
ENTER [
]
Select a picture mode (Picture Mode) suitable for the environment where the product will be used.
Different Picture Mode options are displayed depending on the current input source.
Picture
Picture Mode
Information
· Backlight
100
· Contrast
95
· Brightness
45
· Sharpness
50
· Color
50
· Tint (G/R)
G 50
R 50
The displayed image may differ depending on the model.
4.1.1
If the input source is PC, DVI or DisplayPort

Information: This mode reduces eye fatigue and is suitable for displaying information to the public.

Advertisement: This mode is suitable for displaying video content and indoor/outdoor
advertisements.

Calibration: In this mode, the brightness, color, gamma and uniformity settings customized using
the color calibration program Advanced Color Management are applied.

To apply the Calibration mode properly, make sure you configure the picture quality settings,
such as brightness, color, gamma and uniformity, using the color calibration program
Advanced Color Management.

To download the Advanced Color Management program, visit www.samsunglfd.com.
4 Screen Adjustment
107
4
Screen Adjustment
4.1.2
4.2
If the input source is AV, Component, HDMI or TV

Dynamic: This mode is suitable when the ambient light is bright.

Standard: This mode is generally suitable for any environment.

Natural: Suitable for reducing eye strain.

Movie: This mode reduces eye fatigue.
Backlight / Contrast / Brightness / Sharpness / Color /
Tint (G/R)
MENU [m]
Picture
ENTER [
]
Your product has several options for adjusting picture quality. Select an option using the
keys, and then press [
When done, press [
Input source
PC, DVI,
DisplayPort, HDMI
(when a PC is
connected)
AV, Component,
HDMI, TV
and
arrow
]. Use the arrow keys to adjust the option value or select an option setting.
].
Picture Mode
Adjustable options
Information
Backlight / Contrast / Brightness / Sharpness
Advertisement
Backlight / Contrast / Brightness / Sharpness / Color
Calibration
Backlight
Dynamic,
Standard, Natural,
Movie
Backlight / Contrast / Brightness / Sharpness / Color
/ Tint(G/R)

When you make changes to Backlight, Contrast, Brightness, Sharpness, Color or Tint (G/R),
the OSD will be adjusted accordingly.

You can adjust and store settings for each external device connected to the product.

Lowering picture brightness reduces power consumption.
4 Screen Adjustment
108
4
4.3
Screen Adjustment
Screen Adjustment
MENU [m]
Picture
Screen Adjustment
ENTER [
]
Screen Adjustment provides various picture size and aspect ratio options. Select an option using the
and
arrow keys, and the press [
press [
]. Use the arrow keys to select an option in the sub-menu, and then
].
Different Screen Adjustment options are displayed depending on the current input source.
Screen Adjustment
Picture Size
Custom
· Zoom/Position
PC Screen Adjustment
Resolution Select
Off
The displayed image may differ depending on the model.
4.3.1
Picture Size
If you have a cable box or satellite receiver, it may have its own set of screen sizes as well. However, we
highly recommend you use your product’s 16:9 mode most of the time.

16:9: Sets the picture to 16:9 wide mode.

Zoom1: Use for moderate magnification. Cuts off the top and sides.

Zoom2: Use for a stronger magnification.

Smart View 1: Reduces the 16:9 picture by 50%.


Smart View 1 is enabled only in HDMI mode.

The picture size can vary depending on the input resolution when you play content from
Videos in AllShare Play.
Smart View 2: Reduces the 16:9 picture by 25%.

Smart View 2 is enabled only in HDMI mode.

The picture size can vary depending on the input resolution when you play content from
Videos in AllShare Play.

Wide Fit: Enlarges the aspect ratio of the picture to fit the entire screen.

4:3: Sets the picture to basic (4:3) mode.
4 Screen Adjustment
109
4
Screen Adjustment
Do not set your product to 4:3 format for a long time. The borders displayed on the left and right,
or top and bottom of the screen may cause image retention (screen burn) which is not covered by
the warranty.

Screen Fit: Displays the full image without any cut-off when HDMI (720p / 1080i / 1080p) or
Component (1080i / 1080p) signals are inputted.

Custom: Changes the resolution to suit the user's preferences.

Original Ratio: If the input source is PC, DVI, HDMI (PC connection), or DP, the video will display in
the original aspect ratio.
Available ports may differ depending on the model. (page 30)
You can adjust and store settings for each external device you have connected to an input on the
product.
Picture Sizes available by Input Source.
Input Source
Picture Size
ATV
16:9, Zoom1, Zoom2, 4:3
AV, Component (480i, 480p)
16:9, Zoom1, Zoom2, 4:3, Custom
DTV (1080i)
16:9, 4:3, Smart View 2, Wide Fit, Screen Fit
Component (1080i, 1080p)
16:9, 4:3, Wide Fit, Screen Fit, Custom
HDMI (720p, 1080i, 1080p)
16:9, 4:3, Smart View 1, Smart View 2,
Custom, Wide Fit, Screen Fit
PC, DVI, DP, HDMI
(when a PC is connected)
16:9, 4:3, Original Ratio
4 Screen Adjustment
110
4
Screen Adjustment
4.3.2
Zoom/Position
Adjusts the picture position. Position is only available if Picture Size is set to Zoom1, Zoom2, Wide Fit
or Screen fit.

To use the Position function after selecting Zoom1, Zoom2, Wide Fit or Screen fit, follow these
steps.
1
2
3
4
5
Press the
button to select Position.
Press the [
Press the
] button.
or
Press the [
button to move the picture up or down.
] button.
Select Close by pressing the
and
buttons sequentially. To reset the picture position, press
Reset.

To use the Zoom/Position function after selecting Screen Fit in HDMI (1080i/1080p) or
Component (1080i/1080p) or Custom, follow these steps.
1
2
3
4
5
6
Press the
button to select Zoom/Position.
Select Zoom or Position.
Press the [
Press the
Press the [
] button.
/
/
/
button to move the picture.
] button.
Select Close by pressing the
and
buttons sequentially.
If you want to reset the picture to its original position, select Reset in the Zoom/Position screen.
The picture will be set to its default position.
4.3.3
PC Screen Adjustment
Coarse / Fine: Removes or reduces picture noise. If the noise is not removed by Fine-tuning alone, use
the Coarse function to adjust the frequency as best as possible (Coarse) and Fine-tune again. After the
noise has been reduced, re-adjust the picture so that it is aligned with the center of screen.
Position: To adjust the PC’s screen position if it is not centered or does not fit the product screen. Press
the
or
button to adjust the Vertical Position. Press the
or
button to adjust the Horizontal
Position.
Image Reset: Resets the image to the default settings.
This option is available when the input source is PC.
4 Screen Adjustment
111
4
Screen Adjustment
4.3.4
Resolution Select
If the picture is not normal even when the resolution of the graphics card is one of the following, you can
optimize the picture quality by selecting the same resolution for the product as the PC using this menu.
Available resolutions: Off / 1024 x 768 / 1280 x 768 / 1360 x 768 / 1366 x 768
This option is available when the input source is PC.
4.4
Auto Adjustment
MENU [m]
Picture
Auto Adjustment
ENTER [
]
Adjust frequency values/positions and fine tune the settings automatically.
This option is available when the input source is PC.
4 Screen Adjustment
112
4
4.5
Screen Adjustment
Advanced Settings
MENU [m]
Picture
Advanced Settings
ENTER [
]
Advanced Settings
Dynamic Contrast
Off
Black Tone
Off
Flesh Tone
0
RGB Only Mode
Color Space
Off
Native
White Balance
10p White Balance
Off
The displayed image may differ depending on the model.
Input Source
Picture Mode
Advanced Settings
PC, DVI,
DisplayPort, HDMI
Information,
Calibration
White Balance / Gamma
(when a PC is
connected)
Advertisement
Dynamic Contrast / Black Tone / Flesh Tone / Color
Space / White Balance / Gamma
AV, Component,
HDMI, TV
Natural, Dynamic
Not available
AV, TV
Standard
Dynamic Contrast / Black Tone / Flesh Tone / RGB
Only Mode / Color Space / White Balance / Gamma /
Motion Lighting
Movie
Dynamic Contrast / Black Tone / Flesh Tone / RGB
Only Mode / Color Space / White Balance / 10p
White Balance / Gamma
Standard
Dynamic Contrast / Black Tone / Flesh Tone / RGB
Only Mode / Color Space / White Balance / Gamma /
Expert Pattern / Motion Lighting
Movie
Dynamic Contrast / Black Tone / Flesh Tone / RGB
Only Mode / Color Space / White Balance / 10p
White Balance / Gamma / Expert Pattern
Component, HDMI
4 Screen Adjustment
113
4
Screen Adjustment
4.5.1
Dynamic Contrast
Adjust the screen contrast.

Off / Low / Medium / High
4.5.2
Black Tone
Select the black level to adjust the screen depth.

Off / Dark / Darker / Darkest
4.5.3
Flesh Tone
Emphasize pink Flesh Tone.
4.5.4
RGB Only Mode
Displays the Red, Green and Blue color for making fine adjustments to the hue and saturation.

Off / Red / Green / Blue
4.5.5
Color Space
Adjusts the range and variety of colors (the color space) available to create images.

Auto / Native / Custom
To configure Color, Red, Green, Blue or Reset, set Color Space to Custom.
4.5.6
White Balance
Adjust the color temperature for a more natural picture.

R-Offset / G-Offset / B-Offset: Adjust each color’s (red, green, blue) darkness.

R-Gain / G-Gain / B-Gain: Adjust each color’s (red, green, blue) brightness.

Reset: Resets the White Balance to its default settings.
4.5.7
10p White Balance (Off / On)
Controls the white balance in 10 point interval by adjusting the red, green, and blue brightness.

Interval: Select interval to adjust.

Red: Adjust the red level.

Green: Adjust the green level.
4 Screen Adjustment
114
4
Screen Adjustment

Blue: Adjust the blue level.

Reset: Resets the 10p White Balance to its default settings.

Available when the Picture Mode is set to Movie and when the external input is set to all input.

Some external devices may not support this function.
4.5.8
Gamma
Adjust the primary color intensity.
4.5.9
Expert Pattern
Use the Expert Pattern function to calibrate the picture. If the OSD menu disappears or a menu other
than the Picture menu is opened, the product saves the calibration and the Expert Pattern screen
disappears.

Off
Turns the Expert Pattern function off.

Pattern1
This test screen demonstrates the effect of the display settings on shades of grey and black.

Pattern2
This test screen demonstrates the effect of the display settings on colors.

After selecting Pattern1 or Pattern2, you can adjust any of the advanced settings for desired
effect.

While the Expert Pattern is running, sound is not outputted.

Only enabled on DTV, Component, HDMI modes.
4.5.10
Motion Lighting (Off / On)
Reduces power consumption by reducing screen brightness when the picture on the screen is in motion.
4 Screen Adjustment
115
4
4.6
Screen Adjustment
Picture Options
MENU [m]
Picture
Select an option using the
setting, and then press [
Picture Options
and
ENTER [
arrow keys, and the press [
]
]. Use the arrow keys to change the
].
Picture Options
Color Tone
Off
Color Temp.
10000K
Digital Noise Filter
Off
MPEG Noise Filter
Off
HDMI Black Level
Normal
Flim Mode
Off
Calibrated Value
Don’t Apply
The displayed image may differ depending on the model.
Input source
PC, DVI
Picture Mode
Picture Options
Information
Color Tone / Color Temp. / Calibrated Value / Dynamic
Backlight
Advertisement
Color Tone / Color Temp. / Digital Noise Filter / MPEG
Noise Filter / Calibrated Value / Dynamic Backlight
Calibration
Dynamic Backlight
HDMI
Information
Color Tone / Color Temp. / HDMI black level
(when a PC is
connected)
Advertisement
Color Tone / Color Temp. / Digital Noise Filter / MPEG
DisplayPort
Noise Filter / HDMI black level / Dynamic Backlight
Calibration
HDMI black level / Dynamic Backlight
Information
Color Tone / Color Temp. / Dynamic Backlight
Advertisement
Color Tone / Color Temp. / Digital Noise Filter / MPEG
Noise Filter / Dynamic Backlight
Calibration
Dynamic Backlight
4 Screen Adjustment
116
4
Screen Adjustment
Input source
Picture Mode
Picture Options
HDMI
Dynamic, Standard,
Natural, Movie
Color Tone / Color Temp. / Digital Noise Filter / MPEG
Noise Filter / HDMI Black Level
AV, Component,
TV, HDMI (1080i)
Dynamic, Standard,
Natural, Movie
Color Tone / Color Temp. / Digital Noise Filter / MPEG
Noise Filter / Film Mode
4.6.1
Color Tone
If the input source is PC, DVI, DisplayPort or HDMI (PC connection).

Off / Cool / Standard / Warm
If the input source is AV, Component, HDMI or TV

Off / Cool / Standard / Warm1 / Warm2
4.6.2

Warm1 or Warm2 will be deactivated when the Picture Mode is Dynamic.

Settings can be adjusted and stored for each external device connected to an input on the
product.
Color Temp.
Adjust the color temperature (Red/Green/Blue). (Range: 3000K–15000K)
This option is available when Color Tone is set to Off.
4.6.3
Digital Noise Filter
If the broadcast signal received by your product is weak, you can activate the Digital Noise Filter feature
to reduce any static and ghosting that may appear on the screen.

Off / Low / Medium / High / Auto / Auto Visualization

Auto Visualization: When changing analog channels, displays signal strength.

Only available for analog channels.

When bar is green, is that the best possible signal.
When the signal is weak, try all the options until the the product displays the best picture.
4.6.4
MPEG Noise Filter
Reduces MPEG noise to provide improved picture quality.

Off / Low / Medium / High / Auto
4 Screen Adjustment
117
4
Screen Adjustment
4.6.5
HDMI Black Level
Selects the black level on the screen to adjust the screen depth.

Normal / Low
Available only in HDMI and DVI mode (AV Timing: 480p, 576p, 720p, 1080i, 1080p).
4.6.6
Film Mode
Sets the product to automatically sense and process film signals from all sources and adjust the picture
for optimum quality.

Off / Auto1 / Auto2
Available in TV, AV and COMPONENT (480i / 1080i) or HDMI(1080i).
4.6.7
Calibrated Value
Select whether to apply the brightness, color, gamma and uniformity settings customized using the color
calibration program Advanced Color Management to the Information and Advertisement modes.

Don’t Apply / Apply
To download the Advanced Color Management program, visit www.samsunglfd.com.
4.6.8
Dynamic Backlight
Automatically adjust the backlight to provide the best possible screen contrast under the current
conditions.

Off / On
The Dynamic Backlight menu is not available when the input source is set to PC, AV, Component or
TV while Video Wall is On.
4.7
Reset Picture
MENU [m]
Picture
Reset Picture
ENTER [
]
Resets your current picture mode to its default settings.
4 Screen Adjustment
118
5
5.1
Sound Adjustment
Configure the sound (Sound) settings for the product.
Sound Mode
MENU [m]
Sound
Sound Mode
ENTER [
]
Use the up and down arrow keys to select an option, and then press [
].
Sound
Sound Mode
Standard
Sound Effect
Broadcast Audio Options
Speacker Settings
Reset Sound
The displayed image may differ depending on the model.

Standard: Selects the normal sound mode.

Music: Emphasizes music over voices.

Movie: Provides the best sound for movies.

Clear Voice: Emphasizes voices over other sounds.

Amplify: Increase the intensity of high-frequency sound to allow a better listening experience for the
hearing impaired.
If Speaker Select is set to External, Sound Mode is disabled.
5 Sound Adjustment
119
5
5.2
Sound Adjustment
Sound Effect
MENU [m]

Sound
Sound Effect
ENTER [
]

If Speaker Select is set to External, Sound Effect is disabled.

Available only when Sound Mode is set to Standard.
Virtual Surround (Off / On)
This function provides a virtual 5.1 channel surround sound experience through a pair of speakers
using HRTF(Head Related Transfer Function) technology.

Dialog Clarity (Off / On)
This function allows you to increase the intensity of a voice over background music or sound effects
so that dialog can be heard more clearly.

Equalizer
The Equalizer displays a series of sliders. Use the up and down arrow keys to select a slider. Use the
left and right arrow keys to change the slider’s value. To Reset the Equalizer, select Reset and
press [
], then select Yes and press [
]. To exit, select Close, and then press [
].
Equalizer is available in the standard sound mode only.

Balance L/R: Adjusts the balance between the right and left speaker.

100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment): Adjusts the level of specific
bandwidth frequencies.

Reset: Resets the equalizer to its default settings.
5 Sound Adjustment
120
5
5.3
Sound Adjustment
Broadcast Audio Options
MENU [m]

Sound
Broadcast Audio Options
ENTER [
]
Preferred Language
(digital channels only)
Use the up and down arrow keys to select a language, and then press [
].
Digital-TV broadcasts can simultaneously transmit many audio tracks (for example, simultaneous
translations of the program into foreign languages).
You can only select a language from among the ones being broadcasted.

Multi-Track Sound
(analog channels only)
Select an option using the up and down arrow keys, and the press [

].
Mono: Choose for channels that are broadcasting in mono or if you are having difficulty
receiving a stereo signal.

Stereo: Choose for channels that are broadcasting in stereo.

SAP: Choose to listen to the Separate Audio Program, which is usually a foreign-language
translation.
Depending on the program being broadcast, you can listen to Mono, Stereo, or SAP.
5.4
Speaker Settings
MENU [m]

Sound
Speaker Settings
ENTER [
]
Speaker Select (External / Internal)
If you are listening to the sound track of a broadcast or movie through an external receiver, you may
hear a sound echo caused by the difference in decoding speed between the products speakers and
the speakers attached to your audio receiver. If this occurs, set the product to External.

When you set Speaker Select to External, the products speakers are turned off. You will
hear sound through the external speakers only. When the Speaker Select is set to Internal,
both the product speakers and the external speakers are on. You will hear sound through
both.

If there is no video signal, both the products speakers and the external speakers will be mute.
5 Sound Adjustment
121
5
Sound Adjustment

Auto Volume (Off / Normal / Night)
Normal equalizes the volume level on each channel, so that when you change channels, the volume
level is the same.
Night equalizes and decrease the volume level on each channel, so each channel is quieter. Night is
useful at night, when you may want to keep the volume low.
To use the volume control of a connected source device, set Auto Volume to Off. A change to the
volume control of the connected source device may not be applied if Auto Volume is set to
Normal or Night.
5.5
Reset Sound
MENU [m]
Sound
Reset Sound
ENTER [
]
Reset all sound settings to the factory defaults. Select Reset Sound, press [
up, and then press [
], select Yes in the pop-
] again.
5 Sound Adjustment
122
6
Channel
MENU [m]
Channel
ENTER [
]
This option is available when the input source is TV.
Channel
Antenna
Cable
Auto Program
Clear Scrambled Channel
Fine Tune
Crosstalk Noise Reduction
Off
The displayed image may differ depending on the model.
6.1
Antenna (Air / Cable)
MENU [m]
Channel
Antenna
ENTER [
]
Before your television can begin memorizing the available channels, you must specify the type of signal
source that is connected to the LED display.

Air / Cable
6 Channel
123
6
6.2
Channel
Auto Program
The Auto Program function memorizes all channels that are available over the air or through your cable
system and adds them to the Channel List.
To start Auto Program, follow these steps:
1
MENU [m]
Push
Channel
Auto Program
ENTER [
] on your remote. The Antenna
Source screen appears.
2
On the Antenna Source screen, select the source of your product signal.


3
Air: If your product is connected to an antenna choose Air, and then press ENTER [
product will automatically start memorizing channels.
]. The
Cable: If your product is connected to a cable outlet, choose Cable, and then press ENTER
[
]. Go to Step 3.
On the cable type screen, use the
/
/
/
buttons to select the type of digital and analog cable
systems you have: STD, HRC, or IRC. Most systems are STD (Standard). When done, select Next,
and then press ENTER [
6.3
]. The product will start memorizing channels.

Channel memorization can take up to 45 minutes, depending on your cable system.

Memorized channels are added to the Added Channels list. These are the channels you will
see when you use the channel buttons on your remote.
Clear Scrambled Channel
MENU [m]
Channel
Clear Scrambled Channel
ENTER [
]
(digital channels only)
This function filters out scrambled channels after Auto Program is completed. This process may take up
to 20~30 minutes.
How to Stop the Clear Scrambled Channels function
1
2
3
Press the [
Press the [
Press the [
] button to select Stop.
] button to select Yes.
] button.
This function is only available in Cable mode.
6 Channel
124
6
6.4
Channel
Fine Tune
MENU [m]
Channel
Fine Tune
ENTER [
]
(analog channels only)
If the reception is clear, you do not have to fine tune the channel, as this is done automatically during the
search and store operation. If the signal is weak or distorted, fine tune the channel manually. Scroll to the
left or right until the image is clear.
6.5

This function is only available in Cable mode.

Settings are applied to the channel you’re currently watching.

Fine tuned channels that have been saved are marked with an asterisk “*” on the right-hand side of
the channel number in the channel banner.

To reset the fine-tuning, select Reset.
Crosstalk Noise Reduction
MENU [m]
Channel
Crosstalk Noise Reduction
ENTER [
]
(analog channels only)
This function reduce diagonal noise in picture caused by the crosstalk of signals. If your TV displays with
a noise while watching TV, turns on this function.
6 Channel
125
7
7.1
Network
Network Setting
7.1.1
Connecting to a Wired Network
There are three ways to attach your product to your LAN using cable.

You can attach your product to your LAN by connecting the LAN port on the back of your product to
an external modem using a LAN cable. See the diagram below.
LAN
The Modem Port on the Wall
External Modem
(ADSL / VDSL / Cable TV)
Modem Cable

RJ45
LAN Cable
You can attach your product to your LAN by connecting the LAN port on the back of your product to
an IP Sharer which is connected to an external modem. Use LAN cable for the connection. See the
diagram below.
LAN
The Modem Port on the Wall
External Modem
(ADSL / VDSL / Cable TV)
Modem Cable

IP Sharer
(having DHCP server)
LAN Cable
RJ45
LAN Cable
Depending on how your network is configured, you may be able to attach your product to your LAN
by connecting the LAN port on the back of your product directly to a network wall outlet using a LAN
cable. See the diagram below. Note that the wall outlet is attached to a modem or router elsewhere
in your house.
LAN
The LAN Port on the Wall
RJ45
LAN Cable

If you have a Dynamic Network, you should use an ADSL modem or router that supports the
Dynamic Host Configuration Protocol (DHCP). Modems and routers that support DHCP
automatically provide the IP address, subnet mask, gateway, and DNS values your product needs to
7 Network
126
7
Network
access the Internet so you do not have to enter them manually. Most home networks are Dynamic
Networks.
Some networks require a Static IP address. If your network requires a Static IP address, you must
enter the IP address, subnet mask, gateway, and DNS values manually on your product Cable
Setup Screen when you set up the network connection. To get the IP address, subnet mask,
gateway, and DNS values, contact your Internet Service Provider (ISP). If you have a Windows
computer, you can also get these values through your computer.
You can use ADSL modems that support DHCP if your network requires a Static IP address. ADSL
modems that support DHCP also let you use Static IP addresses.
7.1.2 Wired Network Settings
MENU [m]
Network
Network Settings
ENTER [
]
Set the network connection to use Internet services such as perform software upgrades.
Network Settings
No network cable or Samsung Wireless LAN Adapter
connected.
Please plug in a network cable or a Samsung Wireless
LAN Adapter.
Start
Cancel
The displayed image may differ depending on the model.
7 Network
127
7
Network
Automatic Network Settings
Use the Automatic Network Settings when connecting your product to a network that supports DHCP.
To set up your product cable network connection automatically, follow these steps.
How to set up automatically
1
2
3
Go to the Network Settings screen.
Select Start, press [
], and then press [
] again.
The network test screen appears and verifies the network connection. When the connection has
been verified, the “Internet is connected successfully.” message appears.

If the connection process fails, check the LAN port connection.

If the automatic process cannot find the network connection values or if you want to set the
connection manually, go to the next section, Manual Network Setup.
Manual Network Settings
Use the Manual Network Settings when connecting your product to a network that requires a Static IP
address.
Getting the Network Connection Values
To view the Network connection values on most Windows computers, follow these steps.
1
2
3
4
Right click the Network icon on the bottom right of the screen.
In the pop-up menu that appears, click Status.
On the dialog that appears, click the Support tab.
On the Support Tab, click the Details button. The Network connection values are displayed.
How to set up manually
To set up your product cable network connection manually, follow these steps.
1
2
Go to the Network Settings screen.
Select Start, press [
], and then press [
] again. The network test screen appears and the
verification process starts.
3
Press [
]. The verification process stops. Select IP Settings on network connection screen. The
IP Settings screen appears.
4
5
6
Select the field at the top, press [
Press the
], and then set IP Settings to Enter manually.
button on your remote to go to the IP Address entry field, and then press [
].
Enter the first portion of the IP Address (for example, 105) into the first entry field using the number
keys on your remote. Press the right arrow button to go to the next field.
7
8
Enter the next portion of the IP Address. Press the right arrow button to go to the next field.
Repeat the entry process for each field in the IP Address.
7 Network
128
7
Network
If you make a mistake when entering a number, re-enter the number to correct it. You can also
press the up or down arrow button to change the number one unit at a time.
9
10
11
12
When done entering the IP Address, press [
].
Press the down arrow key to go to the Subnet Mask fields, and then press [
].
Repeat the same entry process for Subnet Mask, Gateway, and DNS Server.
When done, select OK at the bottom of the page, and then press [
]. The network test screen
appears and the verification process starts. When the connection has been verified, the “Internet is
connected successfully.” message appears.
7 Network
129
7
Network
7.1.3 Connecting to a Wireless Network
To connect your product to your network wireless, you need a wireless router or modem and a Samsung
Wireless LAN adapter (WIS10ABGN, WIS12ABGNX) , which you connect to your product back or side
panel USB port. See the illustration below.
Wireless IP sharer
(router having DHCP server)
Product Rear Panel
The LAN Port on the Wall
Samsung Wireless LAN Adapter
LAN Cable
Samsung’s Wireless LAN adapter is sold separately and is offered by selected retailers, Ecommerce
sites, and Samsungparts.com. Samsung’s Wireless LAN adapter supports the IEEE 802.11a/b/g and n
communication protocols. Samsung recommends using IEEE 802.11n. When you play video over a
network connection, the video may not play smoothly.

You must use the “Samsung Wireless LAN adapter” (WIS10ABGN, WIS12ABGNX) to use a
wireless network.

The Samsung Wireless LAN Adapter and the USB extension Cable are sold separately and are
offered by select retailers, Ecommerce sites, and Samsungparts.com.

To use a wireless network, your product must be connected to a wireless IP sharer (either a router
or a modem). If the wireless IP sharer supports DHCP, your product can use a DHCP or static IP
address to connect to the wireless network.

Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the
wireless IP sharer is currently being used by another device nearby, this will result in interference
and communication failure.

Your product supports only the following wireless network security protocols.

Authentication Mode: WEP, WPAPSK, WPA2PSK

Encryption Type: WEP, TKIP, AES.

If you select the Pure High-throughput (Greenfield) 802.11n mode and the Encryption type is set to
WEP, TKIP or TKIP AES (WPS2Mixed) on your AP or wireless router, Samsung TVs will not
support a connection in compliance with new Wi-Fi certification specifications.

If your wireless router supports WPS (Wi-Fi Protected Setup), you can connect to the network via
PBC (Push Button Configuration) or PIN (Personal Identification Number). WPS will automatically
configure the SSID and WPA key in either mode.

If your router, modem, or device is not certified, it may not connect to the product via the
“Samsung Wireless LAN adapter”.

Ensure the product is turned on before you connect the “Samsung Wireless LAN adapter”.

Connection Methods: You can set up the wireless network connection in three ways.

Auto Setup (Using the Auto Network Search function)

Manual Setup

WPS (PBC)
7 Network
130
7
Network

The product may not recognize the “Samsung Wireless LAN adapter” if you connect it to the
product with a USB hub or USB extension cable other than the cable supplied with the product.
7.1.4 Wireless Network Setting
Automatic Network Setup
Most wireless networks have an optional security system that requires devices that access the network
to transmit an encrypted security code called an Access or Security Key. The Security Key is based on
a Pass Phrase, typically a word or a series of letters and numbers of a specified length you were asked to
enter when you set up security for your wireless network. If you use this method of setting up the network
connection, and have a Security Key for your wireless network, you will have to enter the Pass Phrase
during the the automatic or manual setup process.
How to set up automatically
1
2
3
Go to the Network Settings screen.
Select Start, press [
], and then press [
] again.
The Network function searches for available wireless networks. When done, it displays a list of the
available networks.
4
In the list of networks, press the
or
button to select a network, and then press the [
] button
twice.
If the wireless router is set to Hidden (Invisible), you have to select Add Network and enter the
correct Network Name (SSID) and Security key to establish the connection.
5
If the Enter security key screen appears, go to step 6. If you select a wireless router that does not
have security, go to step 8.
6
7
8
If the router has security, enter the Security key (Security key or PIN).

When you enter the Security key (Security key or PIN), use / / / buttons on your
remote to select number/ characters. Press the [
] button to enter the characters.

You can also enter numbers by pressing the number buttons on your remote.
When done, use the right arrow button to move the cursor to Next, and then press [
].
The network connection screen appears and the verification process starts. When the connection
has been verified, the “Your wireless network and Internet connection are setup and ready to
use.” message appears.

If the network does not accept the Security key (Security key or PIN), select Retry or select
IP Settings to enter the settings manually.

If you want to set up the connection manually, select IP Settings. Then, go to the next
section, “How to set up manually”.
7 Network
131
7
Network
Manual Network Setup
Use the Manual Network Settings when connecting your product to a network that requires a Static IP
address or if the automatic connection process has failed.
Getting the Network Connection Values
To view the Network connection values on most Windows computers, follow these steps.
1
2
3
4
Right click the Network icon on the bottom right of the screen.
In the pop-up menu that appears, click Status.
On the dialog that appears, click the Support tab.
On the Support Tab, click the Details button. The Network connection values are displayed.
How to set up manually
To set up your product cable network connection manually, follow these steps.
1
2
3
Go to the Network Settings screen.
Select Start, press [
], and then press [
] again.
The Network function searches for available wireless networks. When done, it displays a list of the
available networks.
4
In the list of networks, press the
or
button to select a network, and then press the [
] button
twice.
If the wireless router is set to Hidden (Invisible), you have to select Add Network and enter the
correct Network Name (SSID) and Security key to establish the connection.
5
If the Enter security key screen appears, go to step 6. If you selected an wireless router that does not
have security, go to step 8.
6
7
8
Enter the Security key (Security key or PIN).

When you enter the Security key (Security key or PIN), use the / / /
remote to select number/characters. Press [
] to enter the characters.

You can also enter numbers by pressing the number buttons on your remote.

You should be able to find the Pass Phrase on one of the set up screens you used to set up
your router or modem.
When done, use the
buttons on your
button to move the cursor to Next, and then press the [
] button.
The network connection screen appears and the verification process starts. Press [
] to cancel.
Select IP Settings on the network connection screen. The IP Settings screen appears.
9
10
11
Select the field on the top, press [
Press the
button on your remote to go to the IP Address entry field, and then press [
].
Enter the first portion of the IP Address (for example, 105) into the first entry field using the number
keys on your remote. Press the
12
], and then set IP Settings to Manual.
button to go to the next field.
Enter the next portion of the IP Address. Press the
button to go to the next field.
7 Network
132
7
Network
13
Repeat the entry process for each field in the IP Address.
If you make a mistake when entering a number, re-enter the number to correct it. You can also
press the
14
15
16
17
or
button to change the number one unit at a time.
When done entering the IP Address, press [
Press the
].
button to go to the Subnet Mask fields, and then press [
].
Repeat the same entry process for Subnet Mask, Gateway, and DNS Server.
When done, select OK at the bottom of the page, and then press [
]. The network connection
screen appears and the verification process starts. When the connection has been verified, the
“Internet is connected successfully.” message appears.
7.1.5
WPS(PBC)
How to set up using WPS(PBC)
If your router has a WPS(PBC) button, follow these steps.
1
2
3
Go to Network Setting screen.
Select Start, press [
], and then press [
] again.
Press the WPS(PBC) button on your router within 2 minutes. Your product automatically acquires all
the network setting values it needs and connects to your network.
4
The network connection screen appears, and network setup is done.
7 Network
133
7
7.2
Network
Network Status
MENU [m]
Network
ENTER [
Network Status
]
You can check the current network and Internet status.
Network Status
Your wireless network and Internet connection are setup and ready to use.
00 : 12 : fb : df : 29 : 76
***. ***. ***. ***.
***. ***. ***. ***.
***. ***. ***. ***.
***. ***. ***. ***.
MAC Address
IP Address
Subnet Mask
Gateway
DNS Server
You are connected to the Internet. If you have any problems using online
services, please contact your Internet Service Provider.
IP Settings
Retry
Close
3FUVSO
The displayed image may differ depending on the model.
7 Network
134
7
7.3
Network
MagicInfo Lite Settings
MENU [m]
1
Network
MagicInfo Lite Settings
ENTER [
]
Server

Server (Setting the MagicInfo Lite Server IP)
Enter the server IP address and port number. Use 7001 as the port number.

If unable to connect to the server using port number 7001, check with your server
administrator to find the correct port number and then change the port number.

FTP Mode
Select an FTP operating mode: Active or Passive.


2
3
Default Storage

Specify the default memory to save schedules or content sent from the server to.

If the default storage space is set to USB, a schedule will not run if a USB device is not connected.

Send a notification message to the server when internal memory is used up.
Storage

Internal Memory: Displays the space currently being used or deletes all content.

USB: Displays the space currently being used.
Schedule Name

Select a schedule title format when creating a local schedule.

4
YYYYMMDD, YYYYDDMM, DDMMYYYY
Information

Device Name: Displays the name of a device recognized by the server.

Serial Number: Displays the original identification number of a device.

Software Version: Displays the software version of a device.
Refer to 195 page for details about the MagicInfo Lite Player menu.
7 Network
135
7
7.4
Network
Wi-Fi Direct
MENU [m]
Network
Wi-Fi Direct
ENTER [
]
Set to connect the product to wireless mobile devices. Using this function, you can connect wireless
mobile devices with your product directly without a router.
To use this function, your mobile device should be supported by the Wi-Fi Direct.
To connect your mobile device with your product using Wi-Fi Direct, follow these steps:
1
2
Go to Wi-Fi Direct screen (Network
Wi-Fi Direct). The product starts to search devices.
Turn on the Wi-Fi Direct function on your device. Select the desired Wi-Fi device.

PBC: Press the WPS(PBC) button on your Wi-Fi device within 2 minutes. Your product
automatically acquires all the network setting values it needs and connects to your network.

PIN: Input the displayed PIN on your device.
If you want to disconnect the device, select the connected Wi-Fi device, and then select Disconnect.
7.5
Soft AP
MENU [m]
Network
Soft AP
ENTER [
]
Using this function, you can connect the product on your mobile devices if your mobile devices do not
support Wi-Fi Direct. Set the options for connection of Wi-Fi device.

Soft AP
Turns on or off the Soft AP. When Soft AP is set to On, your mobile devices can find the product
name in Wi-Fi connection list.

Security key
Set the Security key manually using the remote control.

B Show security key
Shows the security key. Whether to show the security key is represented by a checkbox at the
top.

A Del.
Deletes the entered security key one digit at a time.

C Space
Inserts a blank space between characters when entering the security key.
7 Network
136
7
Network
Return

Returns to the screen before entering the security key.
7.6

The security key should consist of more than 8 digits.

Input the generated security key into the device you want to connect.

If network does not operate normally, check the security key again. An incorrect security key
may cause a malfunction.
AllShare Settings
MENU [m]
Network
AllShare Settings
ENTER [
]
Shows a list of mobile phones or connected devices which have been set up to use the Allshare Play
function with this product.
The Allshare Play function is available in all devices which support DLNA DMC.

Allow / Deny: Allows/Blocks the devices.

Delete from the list: Deletes the devices from the list.
This function only deletes the name of the device from the list. If the deleted device is turned on or
tries to connect to the product, it may appear on the list again.
7.6.1 Using the AllShare Play Function
An alarm window appears informing you that media contents (videos, photos, music) sent from a mobile
phone will be displayed on your product. The contents are played automatically 3 seconds after the alarm
window appears. If you press the RETURN or EXIT button when the alarm window appears, the media
contents are not played.

The first time a device accesses your product through the media function, a warning popup
window appears. Press the [
] button to select Allow. This permits the phone to access the
product freely and use the Allshare Play function to play content.

To turn off media contents transmissions from a mobile phone, set Deny in the AllShare Settings.

Contents may not play on your product depending on their resolution and format.

The [

Using the mobile device, you can control the Allshare Play. For details, refer to each mobile’s
user’s guide.
] and
/
buttons may not work depending on the type of media content.
7 Network
137
7
7.7
Network
Device Name
Select or enter a device name. This name can be shown on network remote controls over the network.
7 Network
138
8
8.1
System
Setup
MENU [m]
System
Setup
ENTER [
]
Configure the channels and the time when setting up the product for the first time or when resetting the
unit.
System
Setup
Multi Control
Time
Menu Language
Rotate Menu
English
Landscape
Eco Solution
Caption
On
The displayed image may differ depending on the model.
8 System
139
8
8.2
System
Multi Control
MENU [m]
System
Multi Control
ENTER [
]
Assign an individual ID to your product.
8.2.1 Configuring settings for Multi Control

ID Setup
Assign an ID to a set. (Range: 0~99)
Press

or
to select a number, and press [
].
ID Input
Enter the ID number of the product connected to the input cable for input signal reception.
Enter the number you want using the number buttons on the remote control.

MDC Connection
Select a method to connect to MDC to receive the MDC signal.

RS232C MDC
Communicate with MDC via the RS232C-stereo cable.

RJ45 MDC
Communicate with MDC via the RJ45 cable.

DisplayPort Daisy Chain
To display the [DP IN] video input through the [DP OUT] output port, select a device connection
method from Single Stream Transport (SST) and Multi Stream Transport (MST).

Clone: In this Single Stream Transport (SST) output mode, the same screen output is displayed
on two display devices connected.

-
If Clone is selected, the PC recognizes the two displays as a single monitor.
-
Clone mode is enabled if the input source is a digital input other than DisplayPort, such
as DVI, HDMI, MagicInfo, or PIM.
Expand: In this Multi Stream Transport (MST) mode, a different screen output is displayed on
two display devices connected.
-
If Expand is selected, the PC recognizes the two displays as separate monitors.
-
The mode functions only on a PC that supports DisplayPort 1.2 MST.
-
For Full HD resolution (1920x1080) displays, a maximum of four displays can be
connected.
Refer to 71 page for details about the MDC menu.
8 System
140
8
8.3
System
Time
MENU [m]
System
Time
ENTER [
]
You can configure Clock Set or Sleep Timer. You can also set the product to automatically turn on or off
at a specified time using the Timer function.
8.3.1
Clock
Set the clock to use the various various timer features of the product.
Changing the Setting for Clock

Clock Mode
Set the current time manually or automatically.

Auto: Have the product set the current time automatically using the time from a digital channel.
You must have the cable or an antenna connected to the product to set the time
automatically.

Manual: Set the current time manually.
Depending on the broadcast station and signal, the auto time set up may not be correct. In
this case, set the time manually.

Clock Set
Set the Date and Time.
Select Clock Set. Select Date or Time, and then press [
]. Use the number buttons to enter numbers
or press the up and down arrow buttons. Use the left and right arrow buttons to move from one entry
field to the next. Press [

] when done. To exit Clock Set, select Close, and then press [
].

Available only when Clock Mode is set to Manual.

You can set the Date and Time directly by pressing the number buttons on the remote
control.
Time Zone
Select your time zone.
This function is only available when the Clock Mode is set to Auto.

DST (Off / On)
Switches the DST (Daylight Saving Time) function on or off.
This function is only available when the Clock Mode is set to Auto.
8 System
141
8
System
8.3.2
Sleep Timer
Automatically shuts off the product after a preset period of time.
(Off, 30 min, 60 min, 90 min, 120 min, 150 min and 180 min).
Use the up and down arrows to select a period of time, and then press [
]. To cancel Sleep Timer,
select Off.
8.3.3
On Timer
Set On Timer so that your product turns on automatically at a time and on a day of your choosing.

On Timer: Set the on timer by making a selection from one of the seven options. Ensure you set the
current time first. (On Timer 1 ~ On Timer 7)
You must set the clock before you can use On Timer.

Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual. If you select
Manual, you can choose the days you want On Timer to turn on your product.
The check mark indicates days you’ve selected.

Time: Set the hour and minute. Use the number buttons or the up and down arrow keys to
enter numbers. Use the left and right arrow buttons to change entry fields.

Volume: Set the desired volume level. Use the left and right arrow buttons to change the
volume level.

Source: Select the input source of your choice.

Antenna (when the Source is set to TV): Select Air or Cable.

Channel (when the Source is set to TV): Select the desired channel.

Music / Photo (when the Source is set to USB): Select a folder in the USB device containing
music or photo files you want played when the product turns on automatically.

If there is no music file on the USB device or you don’t select a folder containing a music file,
the Timer function does not operate correctly.

If there is only one photo file in the USB, the Slide Show will not play.

If a folder name is too long, the folder cannot be selected.Each USB you use is assigned its
own folder. When using more than one of the same type of USB, make sure the folders
assigned to each USB have different names.

We recommend that you use a USB memory stick and a multi card reader when using
On Timer. The On Timer function may not work with USB devices with a built-in battery, MP3
players, or PMPs made by some manufacturers because the product can take too long to
recognize these devices.
8 System
142
8
System
8.3.4
Off Timer
Set the off timer (Off Timer) by making a selection from one of the seven options. (Off Timer 1 ~ Off
Timer 7)
You must set the clock before you can use Off Timer.
Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual. If you select
Manual, you can choose the days you want Off Timer to turn off your product.

The check mark indicates days you’ve selected.
Time: Set the hour and minute. Use the number buttons or the up and down arrow keys to enter
numbers. Use the left and right arrow buttons to change entry fields.

8.3.5
Holiday Management
Timer will be disabled during a period specified as a holiday.
Setting Holiday Management

Add: Specify the period you want to add as a holiday.

Select the start and end dates of the holiday you want to add using the
/
buttons, and click
the Save button.

The period will be added to the list of holidays.
-
Start: Set the start date of the holiday.
-
End: Set the end date of the holiday.
-
Delete: Delete all items from the list of holidays.
Select Delete. The message "Delete all holidays?" will appear.
Select Yes. All holidays will be deleted.

Apply: Set the On Timer and Off Timer to not activate on public holidays.

Press [
] to select the On Timer and Off Timer settings you do not want to activate.

The selected On Timer and Off Timer will not activate.
8 System
143
8
8.4
System
Menu Language
MENU [m]
System
Menu Language
ENTER [
]
Set the menu language.
A change to the language setting will only be applied to the onscreen menu display. It will not be applied
to other functions on your PC.
8.5
Rotate Menu
MENU [m]
System
Rotate Menu
ENTER [
]

Landscape: Display the menu in landscape mode (default).

Portrait: Display the menu in portrait mode on the right side of the product screen.
8 System
144
8
8.6
System
Eco Solution
MENU [m]
System
Eco Solution
ENTER [
]
Eco Solution
Energy Saving
Off
Eco Sensor
On
No Signal Power Off
Off
Auto Power Off
Off
The displayed image may differ depending on the model.
8.6.1
Energy Saving
Save power with the Energy Saving feature.
While Energy Saving mode is active, the product power consumption will be controlled to save power.

Off / Low / Medium / High / Picture Off
8.6.2
Eco Sensor (Off / On)
To enhance your power savings, the picture settings will automatically adapt to the light in the room.
Adjusting the Backlight setting under Picture while Eco Sensor is on will disable the Eco Sensor.

Min. Backlight: When Eco sensor is On, you can manually adjust the minimum screen brightness.
If Eco Sensor is On, the display brightness may change (become slightly darker or brighter)
depending on the surrounding light intensity. You can control the screen’s minimum brightness
with the Min. Backlight function.
8.6.3
No Signal Power Off
To avoid unnecessary energy consumption, you can set how long you want the product to remain on if
it’s not receiving a signal.

Off / 15 min. / 30 min. / 60 min.

Disabled when an attached PC is in power saving mode.

The product will automatically power off at a specified time. The time can be changed as required.
8 System
145
8
System
8.6.4
Auto Power Off (Off / On)
The product will automatically turn off if you don’t press a button on the remote or touch a button on
product front panel within 4 hours to prevent overheating.
8.7
Caption
MENU [m]
System
Caption
ENTER [
]
(On-Screen Text Messages)
8.7.1
Caption
You can switch the caption function on or off. If captions are not available, they will not be displayed on
the screen.

Off / On
The Caption feature does not work with devices connected to the product through the
Component, HDMI or PC input jacks.
8.7.2
Caption Mode
You can select the desired caption mode.
The availability of captions depends on the program being Broadcasted.

Default / CC1~CC4 / Text1~Text4: (analog channels only) The Analog Caption function operates in
either analog product channel mode or when a signal is supplied from an external device to the
product. (Depending on the broadcasting signal, the Analog Caption function may or may not work
with digital channels.)

Default / Service1~Service6 / CC1~CC4 / Text1~Text4: (digital channels only) The Digital
Captions function works with digital channels.
Service1~6 may not be available in digital caption mode depending on the broadcast.
8 System
146
8
System
8.7.3
Digital Caption Options
(digital channels only) Adjusts the each option. When done, select Close.

Size: Options include Default, Small, Standard and Large. The default is Standard.

Font Style: Options include Default and Styles 0 to 7. The default is Style 0.

Font Color: You can change the color of the letters. Options include Default, White, Black, Red,
Green, Blue, Yellow, Magenta and Cyan. The default is White.

Background Color: You can change the background color of the caption. Options include Default,
White, Black, Red, Green, Blue, Yellow, Magenta and Cyan. The default is Black.

Font Opacity: This adjusts the opacity of text. Options include Default, Transparent, Translucent,
Solid and Flashing.

Background Opacity: This adjusts the opacity of the caption background. Options include Default,
Transparent, Translucent, Solid and Flashing.

Return to Default: This option sets each Size, Font Style, Font Color, Background Color, Font
Opacity and Background Opacity to their default.

Digital Caption Options are available only when you can select Return to Default and
Service1 ~ Service 6 in Caption mode.

The availability of captions depends on the program being Broadcasted.

The Return to Default setting follows the standards set by the broadcaster.

You cannot set the Font Color and Background Color to the same color.

You cannot set both the Font Opacity and the Background Opacity to the same color.
8 System
147
8
8.8
System
Security
MENU [m]
System
Security
ENTER [
]
Every time you access the Security functions, the PIN screen will appear and the default PIN number is
“0-0-0-0". The PIN screen closes and the Security menu appears.
Security
Safety Lock
Off
Button Lock
Off
Program Rating Lock
Off
Change PIN
The displayed image may differ depending on the model.
8.8.1
Safety Lock (Off / On)
It sets safe lock function.
All the menus and buttons of the product and remote control, except for the LOCK button on the remote
control, will be locked by the Safety Lock function. To unlock the menus and buttons, press the LOCK
button and then enter the password (default password: 0 - 0 - 0 - 0).
8.8.2
Button Lock (Off / On)
This menu can be used to lock the buttons on the product. Only the remote control can control the
product if Button Lock is set to On.
8 System
148
8
System
8.8.3
Program Rating Lock (Off / On)
When turned on, the Program Rating Lock feature can automatically block programs that you deem
inappropriate for your children. You must enter a PIN (personal identification number) before you can set
or change any of the Program Rating Lock restrictions.


This option is available when the input source is TV.

The default PIN number for a new product set is “0-0-0-0”.
TV Rating: You can block TV programs based on their ratings. This function allows you to control
what your children can watch. TV Rating displays a grid with locks. The following categories are on
the left side.
TV-Y: Young children / TV-Y7: Children 7 and over / TV-G: General audience / TV-PG: Parental
guidance / TV-14: Viewers 14 and over / TV-MA: Mature audience
The following categories are on top

ALL: Lock all TV ratings. / FV: Fantasy violence / V: Violence / S: Sexual situation / L: Adult
Language / D: Sexually Suggestive Dialog


To block certain content, you select a lock, and press [
] (That is, you “click it”.). For example,
click the lock at the intersection of V and TV-MA, and you block all programs that are rated violent
and for mature adults. The locks are also assigned to related groups. For example, if you click
TV-Y under All, then TV-Y7 will also automatically be blocked. Similarly, if you click TV-G under
ALL, then all the categories in the young adult group will be blocked (TV-G, TV-PG, TV-14 and
TV-MA). The sub-ratings (D, L, S, V) work similarly. So, if you block the L sub-rating in TV-PG,
then the L sub-ratings in TV-14 and TV-MA will automatically be blocked.

To unblock a category, click the lock. To unblock all the categories in a row, click the lock under
ALL.

To watch a blocked program, you must enter the Security code when requested.
Movie Rating (MPAA): You can block movies based on their MPAA rating. The Motion Picture
Association of America (MPAA) has implemented a rating system that provides parents or guardians
with advanced information on which films are appropriate for children.
Movie Rating displays a column with locks and the following ratings categories.
G: General audience (no restrictions). / PG: Parental guidance suggested. / PG-13: Parents strongly
cautioned. / R: Restricted. Children under 17 should be accompanied by an adult. / NC-17: No
children under age 17. / X: Adults only. / NR: Not rated.

To block certain content, you select a lock, and press [
] (That is, you “click it”.). For
example, click the X lock and you block all X-rated movies. The rating categories are also
grouped so that clicking one category blocks all the categories a parent would block along
with it. For example, if you block the PG-13 category, then R, NC-17 and X will automatically
be blocked also.

To unblock a category, click the lock.
8 System
149
8
System

Canadian English Rating: You can block TV programs based on their Anglophone Canadian rating.
Canadian English Rating displays a column with locks and the following ratings categories.
C: Programming intended for children under age 8. / C8+: Programming generally considered
acceptable for children 8 years and over to watch on their own. / G: General programming, suitable
for all audiences. / PG: Parental Guidance. / 14+: Programming contains themes or content which
may not be suitable for viewers under the age of 14. / 18+: Adult programming.


To block certain content, you select a lock, and press [
] (That is, you “click it”.). For
example, click the 18+ lock and you block all TV programs rated 18+. The rating categories
are also grouped so that clicking one category blocks all the categories a parent would block
along with it. For example, if you block the G category, then PG, 14+ and 18+ will
automatically be blocked.

To unblock a category, click the lock.
Canadian French Rating: You can block TV programs based on their French Canadian rating.
Canadian French Rating displays a column with locks and the following ratings categories.
G: General / 8 ans+: Programming generally considered acceptable for children 8 years and over to
watch on their own. / 13 ans+: Programming may not be suitable for children under the age of 13. /
16 ans+: Programming is not suitable for children under the age of 16. / 18 ans+: Programming
restricted to adults.


To block certain content, you select a lock, and press [
] (That is, you “click it”.). For
example, click the 18 ans+ lock and you block all TV programs rated 18 ans+. The rating
categories are also grouped so that clicking one category blocks all the categories a parent
would block along with it. For example, if you block the 8 ans+ category, then 13 ans+,
16 ans+ and 18 ans+ will automatically be blocked also.

To unblock a category, click the lock.
Downloadable U.S. Rating: Parental restriction information you can use while watching DTV
channels.

If information is not downloaded from the broadcasting station, Downloadable U.S. Rating
menu is deactivated.

Parental restriction information is automatically downloaded while you watch DTV channels. It
may take several seconds.

The Downloadable U.S. Rating menu is available for use after information is downloaded
from the broadcasting station. However, depending on the information from the broadcasting
station, it may not be available for use.

Parental restriction levels differ depending on the broadcasting station. The default menu
name and Downloadable U.S. Ratings change depending on the downloaded information.

Even if you set the on-screen display to another language, the Downloadable U.S. Rating
menu will appear in English only.

Blocking one rating level will automatically block other categories that deal with more sensitive
material.

The rating titles (For example: Humor Level..etc) and TV ratings (For example: DH, MH, H..etc)
may differ depending on the broadcasting station.
8 System
150
8
System
8.8.4
Change PIN
The Change PIN screen will appear. Choose any 4 digits for your PIN and enter it in Enter New PIN. Reenter the same 4 digits in Confirm New PIN. When the Confirm screen disappears, press the Close
button. The product has memorized your new PIN.
8.9
PIP
MENU [m]

System
PIP
,
ENTER [
]

If you have set Double(
Size.
) mode in PIP (Picture-in-Picture), you cannot adjust the Picture

For PIP sound, refer to the Sound Select instructions.

If you turn the product off while watching in the PIP mode, the PIP function is reset to off. When you turn
your product on, you must turn PIP on again to watch in the PIP mode.

You may notice that the picture in the PIP screen becomes slightly unnatural when you use the main
screen to view a game or karaoke.

While Program Rating Lock is on, you cannot use PIP.
PIP Settings
The picture from the external video source will be in the main screen and the picture from the
product tuner will be in the PIP sub-picture screen.
Main picture
Sub picture
PC
AV, TV
AV
PC, HDMI, DVI, DisplayPort
Component
TV
TV
PC, Component, HDMI, DVI, DisplayPort
HDMI, DVI, DP
AV, TV
MagicInfo Lite
PC, AV, Component, HDMI, DVI, DisplayPort

PIP (Off / On): Activate or deactivate the PIP function.

Source (depending on the input source): You can select a source of the subpicture.

Air/Cable (Air / Cable): Select either Air or Cable as the input source for the sub-screen.
This option is enabled if the secondary display is set to TV.

Channel: Select the channel for the sub-screen.
This option is enabled if the secondary display is set to TV.
8 System
151
8
System

Size (
,

Position (
,
,
,
,
In Double (

,
,
,
): Select a size for the subpicture.
): Select a position for the sub-picture.
,
) mode, you cannot select Position.
Sound Select (Main / Sub): You can choose to listen to the sound from the Main picture or the
Sub picture.
8.10 Auto Protection Time
MENU [m
System
Auto Protection Time
ENTER [
]
If the screen displays a still image for a certain period of time you define, the product activates the screen
saver to prevent the formation of burnt in ghost images on the screen.

Off / 2 hours / 4 hours / 8 hours / 10 hours
8 System
152
8
System
8.11 Screen Burn Protection
MENU [m]
System
Screen Burn Protection
ENTER [
]
To reduce the possibility of screen burn, this unit is equipped with Pixel Shift screen burn prevention
technology. Pixel Shift moves the picture slightly on the screen. The Pixel Shift Time setting allows you
to program the time between movements of the picture in minutes.
Screen Burn Protection
Pixel Shift
Off
Timer
Off
Immediate Display
Off
Side Gray
Off
The displayed image may differ depending on the model.
8.11.1
Pixel Shift
Configure Pixel Shift to prevent screen damage.
Available Pixel Shift Settings and Optimum Settings
Available Settings
Optimum Settings for
TV/AV/Component/HDMI/PC
Horizontal
0~4 (pixels)
4
Vertical
0~4 (pixels)
4
Time (minute)
1~4 min.
4 min.

The Pixel Shift value may differ depending on the product size (inches) and mode.

This function is not available in the Screen Fit mode.

Horizontal: Sets how many pixels the screen moves horizontally.

Vertical: Sets how many pixels the screen moves vertically.

Time: Set the time interval for performing the horizontal or vertical movement, respectively.
8 System
153
8
System
8.11.2
Timer
You can set the timer for Screen Burn Protection.
Timer


Off
Repeat: Display the image retention-preventive pattern set in Mode at specified time intervals
(Period).
Period and Time can be configured when Repeat is selected.

Interval: Display the image retention-preventive pattern set in Mode for a specified period of time
(from Start Time to End Time).
The option is enabled only when Clock Set is configured.

Mode: Select a screen protective pattern to display.

Pixel: Pixels on the screen alternate black continuously.

Rolling Bar: A vertical bar moves left to right.

Fading Screen: The entire screen becomes brighter, then darker.
The Rolling Bar and Fading Screen patterns appear only once regardless of the specified repeat
period or time.

Period: Specify the time interval to activate the Screen Burn Protection function.

Hour 1 ~ Hour 10
The option is enabled when Repeat is selected for Timer.

Time: Specify the duration to keep the Screen Burn Protection function on.

Sec 10 ~ Sec 50
The option is enabled when Pixel is selected for Mode.

Start Time: Set start time to display screen saver.
The option is enabled when Interval is selected for Timer.

End Time: Set end time to display screen saver.
The option is enabled when Interval is selected for Timer.
8.11.3
Immediate Display
Select the screen saver you want to display immediately.

Off / Pixel / Rolling Bar / Fading Screen
8 System
154
8
System
8.11.4
Side Gray
When the screen is set to 4:3 aspect ratio, adjust the brightness of white margins on sides to protect the
screen.

Off / Light / Dark
8.12 Ticker
Input text while a video or image is displayed and display the text on the screen.

Off / On
Message, Time, Position, Motion, and Font Style are enabled only when Ticker is set to On.

Message: Enter a message to display on the screen.

Time: Set the Start Time and End Time to display a message (Message).

Position: Select an orientation to display a message (Message) from Horizontal and Vertical.

Motion: Specify the Direction and Speed to display a message (Message).

Font Style: Specify the message Size and Font Color.
8 System
155
8
System
8.13 Video Wall
MENU [m]
System
Video Wall
ENTER [
]
Customize the layout of multiple displays that are connected to form a video wall. In addition, display part
of a whole picture or repeat the same picture on each of the connected multiple displays. To display
multiple images, refer to MDC Help or the MagicInfo user guide. Some models may not support the
MagicInfo function.

If more than four displays are connected horizontally and vertically, it is recommended that you use
an input resolution of XGA (1024 x 768) level or higher to prevent a dark picture due to degradation
in the contrast or color intensity.

The Video Wall option is only enabled when PIP is set to Off.
8.13.1
Video Wall
You can activate or deactivate Video Wall. To organize a video wall, select On.
Video Wall
Video Wall
On
· Format
Full
· Horizontal
1
· Vertical
1
· Screen Position
The displayed image may differ depending on the model.
8.13.2
Format
Select a format to display images on multiple displays.

Full: Display images in full screen.

Natural: Display images at the original resolution without enlarging or reducing.
The Format option is only enabled when Video Wall is set to On.
8 System
156
8
System
8.13.3
Horizontal
This function automatically divides the screen according to the specified number of horizontal displays.
Enter the number of horizontally arranged displays.
The horizontal screen will automatically be divided according to the number entered.
A maximum of 15 displays can be assigned to the horizontal arrangement.

The screen can be divided into a maximum of 100 screens (horizontal and vertical screens
multiplied). For example, if the horizontal arrangement is set to 15, a maximum of 6 displays can be
assigned to the vertical arrangement. Conversely, if the vertical arrangement is set to 15, a
maximum of 6 displays can be assigned to the horizontal arrangement.

The Horizontal option is only enabled when Video Wall is set to On.
8.13.4
Vertical
This function automatically divides the screen according to the specified number of vertical displays.
Enter the number of vertically arranged displays.
The vertical screen will automatically be divided according to the number entered.
A maximum of 15 displays can be assigned to the vertical arrangement.

The screen can be divided into a maximum of 100 screens (horizontal and vertical screens
multiplied). For example, if the horizontal arrangement is set to 15, a maximum of 6 displays can be
assigned to the vertical arrangement. Conversely, if the vertical arrangement is set to 15, a
maximum of 6 displays can be assigned to the horizontal arrangement.

The Vertical option is only enabled when Video Wall is set to On.
8.13.5
Screen Position
You can customize the arrangement of split screens by moving displays identified with a number using
the Screen Position function.
Select Screen Position to display the arrangement of displays (identified with a number) specified
according to the Horizontal or Vertical settings. To customize the arrangement, move a number (display)
using the direction buttons on the remote control and press [
].

A maximum of 100 displays can be arranged in Screen Position.

The Screen Position option is only enabled when Video Wall is set to On.

The Screen Position window is only displayed when Horizontal and Vertical are configured.
8 System
157
8
System
8.14 Source AutoSwitch Settings
MENU [m]
System
Source AutoSwitch Settings
ENTER [
]
Turning on the display with Source AutoSwitch On, and the previous video source selection is not
active, the display will automatically search the different video input sources for active video.

Source AutoSwitch
When the Source AutoSwitch is On, the display video source will automatically be searched for
active video.
The Primary Source selection will be activated, if the current video source is not recognized.
Secondary Source selection will become active, if no primary video source is available.
If both the primary and secondary input sources are not recognized, the display will perform two
searches for an active source, each search checking the primary and then secondary source. If both
searches fail, the display will return to the first video source and display a message indicating that
there is no signal.
When the Primary Source selection is set to All, the display will search all the video source inputs
twice in sequence looking for an active video source, returning back to the first video source in the
sequence if no video is found.
Source AutoSwitch Settings
Source AutoSwitch
Off
· Primary Source Recovery
Off
· Primary Source
All
· Secondary Source
TV
The displayed image may differ depending on the model.

Primary Source Recovery
Select whether to restore the selected primary input source when a primary input source is
connected.
The Primary Source Recovery function is disabled if Primary Source is set to All.

Primary Source
Specify Primary Source for the automatic input source.

Secondary Source
Specify Secondary Source for the automatic input source.
8 System
158
8
System
8.15 General
MENU [m]
System
General
ENTER [
]
General
Max. Power Saving
On
Game Mode
Off
BD Wise
On
Menu Transparency
Medium
Sound Feedback
Off
Auto Power
Off
Standby Control
Auto
The displayed image may differ depending on the model.
8.15.1
Max. Power Saving
Turns off the product to reduce power consumption after the PC has been left idle for a specified period
of time.
Available only in PC, DVI, HDMI, DisplayPort mode.
8.15.2
Game Mode
When connecting to a game console such as PlayStation™ or Xbox™, you can enjoy a more realistic
gaming experience by selecting game mode.

Precautions and limitations for game mode

To disconnect the game console and connect another external device, set Game Mode to
Off in the setup menu.

If you display the product menu in Game Mode, the screen shakes slightly.

Game Mode is not available when the input source is set to TV, PC, DVI or DisplayPort.

After connecting the game console, set Game Mode to On. Unfortunately, you may notice
reduced picture quality.

If Game Mode is On
- Picture mode is set to Standard and Sound mode is set to Movie.
8 System
159
8
System
8.15.3
BD Wise
Provides the optimal picture quality for Samsung DVD, Blu-ray and Home Theater products which
support BD Wise. When BD Wise is turned On, the picture mode is automatically changed to the
optimal resolution.
Available when you connect Samsung products that support BD Wise through an HDMI cable to the
product.
8.15.4
Menu Transparency
Adjust transparency of menu box.

High / Medium / Low
8.15.5
Sound Feedback
Your product gives sound feedback when you use product. Sound Feedback is enabled by default.
Turn off Sound Feedback or adjust its volume.

Off / Low / Medium / High
8.15.6
Auto Power
Enabling this option will automatically power on the product if the power cable is connected.
8.15.7
Standby Control
You can set the screen standby mode to be applied when an input signal is received.

Auto
Power-saving mode will activate if no input signals are detected even though a source device is
connected to the display.
The message "No Signal" will appear if no source device is connected.

On
Power-saving mode will activate if no input signals are detected.

Off
The message "No Signal" will appear if no input signals are detected.

The Standby Control option is only enabled when Source is set to PC, DVI, HDMI or
DisplayPort.

If "No Signal" is displayed although a source device is connected, check the cable
connection. Refer to 172 page for details about connecting source devices.
8 System
160
8
System
8.15.8
Lamp Schedule
Enables the lamp value to be adjusted to a user-specified value at a specified time in MDC mode.
8.15.9
OSD Display
Displays or hides a menu item on the screen.

Source OSD / No Signal OSD / MDC OSD
8.15.10 Power On Adjustment
You can set the warm-up time for the screen to turn on after the power button is pressed. (Range: 0 – 50
seconds)
A warm-up time that is too short may damage the product due to overvoltage.
8.15.11 Temperature Control
This function detects the internal temperature of the product. You can specify the temperature range that
is acceptable.
The default temperature is set to 77 C.
The recommended operating temperature for this product is 75 to 80 C (based on an ambient
temperature of 40 C).
The screen will become darker if the current temperature exceeds the specified temperature limit. If the
temperature continues to rise, the product will power off to prevent overheating.
8 System
161
8
System
8.16 Anynet+ (HDMI-CEC)
MENU [m]
8.16.1
System
Anynet+ (HDMI-CEC)
ENTER [
]
Anynet+ (HDMI-CEC)
What is Anynet+?
Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+
with your Samsung product remote. The Anynet+ system can be used only with Samsung devices that
have the Anynet+ feature. To be sure your Samsung device has this feature, check if there is an Anynet+
logo on it.

You can only control Anynet+ devices using the product remote control, not the buttons on the
product.

The product remote control may not work under certain conditions. If this occurs, reselect the
Anynet+ device.

The Anynet+ functions do not operate with other manufacturers’ products.

For instructions explaining how to connect Anynet+ external devices, refer to the device’s user
manual You must connect an Anynet+ device using an HDMI cable. Some HDMI cables may not
support Anynet+ functions.

Anynet+ works when the AV device supporting Anynet+ is in the standby or on status.

While in PIP mode, Anynet+ functions only when an AV device is connected as the primary display.
It does not work if the AV device is connected as a secondary display.

Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the
same type.

However, you can connect only one Anynet+ Home Theater. To connect an Anynet+ Home
Theate, connect the Home Theater to the product using an HDMI cable then.
8 System
162
8
System
Anynet+ Menu
The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the
product.
Anynet+ Menu
View PC
Device List
Description
Changes Anynet+ mode to PC mode.
Shows the Anynet+ device list.
(device_name) MENU
Shows the menu of the connected device menus. E.g. if a DVD player is
connected, the disc menu of the DVD player will appear.
(device_name) Tools
Shows the tools menu of the connected device. E.g. if a DVD player is
connected, the tools menu of the DVD player will appear.
Depending on the device, this menu may not be available.
(device_name) Title Menu
Shows the title menu of the disc in the connected device. E.g. If a DVD
player is connected, the title menu of the movie in the DVD player will
appear.
Depending on the device, this menu may not be available.
8.16.2
Auto Turn Off (No / Yes)
Setting an Anynet+ Device to turn Off automatically when the product is turned off.

If Auto Turn Off is set to Yes, running external devices will turn off at the same time as the product
powers off.

May not be enabled depending on the device.
Switching between Anynet+ Devices
1
2
Press the TOOLS button, select Anynet+ (HDMI-CEC), and then press [
Select Device List, and then press the [
].
] button.
If you cannot find a device you want, select Refresh to refresh the list.
3
Select a device, and then press the [
] button. You can switch to the selected device.
The Device List menu appears only when you set Anynet+ (HDMI-CEC) to On in the System
menu.

Switching to the selected device may take up to 2 minutes. You cannot cancel the switching
operation while switching is in progress.

If you have selected an Anynet+ device by pressing the SOURCE button and then selecting
its input source, you cannot use the Anynet+ function. Make sure to switch to an Anynet+
device by using the Device List.
8 System
163
8
System
Troubleshooting for Anynet+
Problem
Anynet+ does not work.
Possible Solution

Check if the device is an Anynet+ device. The Anynet+ system
supports Anynet+ devices only.

Check if the Anynet+ device power cord is properly connected.

Check the Anynet+ device’s Video/Audio/HDMI cable
connections.

Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+
setup menu.

Check whether the remote control is Anynet+ compatible.

Anynet+ doesn’t work in certain situations. (Searching channels,
operating Plug & Play (initial setup), etc.)

If you have removed and then reconnected the HDMI cable,
please make sure to search devices again or turn your product off
and on again.
I want to start Anynet+.

Check if the Anynet+ function of the Anynet device is set on.

Check if the Anynet+ device is properly connected to the product
and check if the Anynet+ (HDMI-CEC) is set to On in the
Anynet+ Setup menu.

Press the TOOLS button to display the Anynet+ menu and select
a menu you want.
I want to exit Anynet+.

Select View PC in the Anynet+ menu.

Press the SOURCE button on the product remote control and
select a non- Anynet+ device.
The message “Connecting to
Anynet+ device...” appears on
the screen.

You cannot use the remote control when you are configuring
Anynet+ or switching to a view mode.

Use the remote control after the product has completed Anynet+
configuration or has finished switching to Anynet+.
8 System
164
8
System
Problem
Possible Solution
The Anynet+ device does not
play.
The connected device is not
displayed.

You cannot use the play function when Plug & Play (initial setup)
is in progress.

Check whether or not the device supports Anynet+ functions.

Check whether or not the HDMI cable is properly connected.

Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+
setup menu.

Search Anynet+ devices again.

Anynet+ requires an HDMI connection. Make sure the device is
connected to your product with an HDMI cable.

Some HDMI cables may not support Anynet+ functions.

If the connection is terminated because there has been a power
failure or the HDMI cable has been disconnected, please repeat
the device scan.
8.17 DivX® Video On Demand
MENU [m]
System
DivX® Video On Demand
ENTER [
]
Shows the registration code authorized for the product. If you connect to the DivX web site and register
using that code, you can download the VOD registration file.
For more information about DivX® VOD, visit “http://vod.divx.com”.
8.18 Reset System
MENU [m]
System
Reset System
ENTER [
]
This option returns the current settings under system to the default factory settings.
8 System
165
8
System
8.19 Reset All
MENU [m]
System
Reset All
ENTER [
]
This option returns all the current settings for a display to the default factory settings.
(Menu Language, Security, Time, Multi Control and Anynet+ will not be initialized.)
8.20 PC Module Power
MENU [m]
System
PC Module Power
ENTER [
]
The PC module can be turned on/off separately from the LFD.
PC module: Refers to network boxes or PIM.
8.20.1
Synced Power-On
To turn on the PC module without turning on the LFD, select Off.

Off / On
8.20.2
Synced Power-Off
To turn off the LFD without turning off the PC module, select Off.

Off / On
8 System
166
9
9.1
Support
Software Update
MENU [m]
Support
Software Update
ENTER [
]
The Software Update menu lets you upgrade your products software to the latest version.

Current Version: This is the software version already installed in the product.
Be careful not to turn off the power until the upgrade is complete. The product will turn off and on
automatically after completing the software upgrade. When you upgrade software, all video and audio
settings you have made will return to their default settings. We advise you to write down your settings
so that you can easily reset them after the upgrade.
9.1.1
By USB
To perform a software update from a USB device, contact the customer service center.
9.1.2
Alternative Software
The Alternative Software feature is not available on this model.

Alternative Software
The Alternative Software option lets you upgrade using a file the product downloaded earlier, but
you decided not to install immediately, or a file downloaded by the product in Standby Mode.
To upgrade By Alternative Software, follow these steps.
1
If upgrade software has been downloaded, you will see the software version number to the right of
Alternative Software.
2
3
Select Alternative Software, and then press the [
] button.
The product displays a message asking if you want to upgrade. Select Yes. The product begins the
upgrade.
4
9.2
When the upgrade is complete, the product turns off automatically, and then turns on.
Contact Samsung
MENU [m]
Support
Contact Samsung
ENTER [
]
9 Support
167
9
Support
View this information when your product does not work properly or when you want to upgrade the
software. You can find information regarding our call centers and how to download products and
software.
9 Support
168
9
9.3
Support
Contents Home
MENU [m]
Support
Contents Home
ENTER [
]
You can enjoy useful and various contents.
9.3.1
Channel List
MENU [m]
Support
Contents Home
ENTER [
Channel List
]
You can view all the channel searched.
Channel List
Added Ch.
a 1
1futech
a 2
24ore.tv
a 3
BBC World
a 4
Class News
a 5
Coming Soon
a 6
R4 DTT
No Information
A Antenna
a 7
C2
a 8
C4
CH Mode
Watch
Page
The displayed image may differ depending on the model.
Using the operation buttons with the Channel List.

A Antenna: Switch the antenna signal to Air or Cable.

C Program View: View the programs scheduled for the selected channel.

CH Mode: Change the list of channels.
The icon appears if there is at least one channel in the list of favorite channels (Favorites).


Watch: Watches the channel you select.
Page: Move to next or previous page.
9 Support
169
9
Support
9.3.2
Channel Manager
MENU [m]
Support
Contents Home
Channel Manager
ENTER [
]
Display all the channels searched and edit the favorites. Change channel names, view information, and
use the delete function.
Channel
All
Added CH.
Favorites 1
Favorites 2
Favorites 3
A Cable
a5
---- (Cable)
a6
---- (Cable)
a7
---- (Cable)
a8
---- (Cable)
a9
---- (Cable)
a 10
---- (Cable)
a 11
---- (Cable)
a 12
---- (Cable)
a 13
---- (Cable)
a 14
---- (Cable)
a 15
---- (Cable)
a 16
---- (Cable)
a 17
---- (Cable)
a 18
---- (Cable)
a 19
---- (Cable)
a 20
---- (Cable)
a 21
---- (Cable)
a 22
---- (Cable)
a 23
---- (Cable)
a 24
---- (Cable)
B
Delete
Information
Page
Select
Tools
Return
The displayed image may differ depending on the model.

A : Switch the antenna signal to Air or Cable.

B : Delete channels that are selected using the cursor or the Select function.


: Display information about a channel that is selected using the cursor.
Page: Move to next or previous page.

Select: Select a desired channel.

Deselect: Deselect channels that are selected using the Select function.

Tools: Use various functions such as Edit Favorites, Rename Channel, Delete, Select All,
Deselect All, and Add.

Return: Return to the previous menu.
9 Support
170
9
Support
Using Tools

Edit Favorites: Edit selected channels in Favorites.

A Add: Add selected channels to Favorites.

A Delete: Delete selected channels from Favorites.

B : Change the order of channels in Favorites.

C : Copy channels to another Favorites group.

D : Move to another Favorites group.

0~9 : Change the channel by entering a channel number using the remote control.

Return: Return to the previous menu.

Rename Channel: Change a selected channel name.

Delete: Delete a selected channel.

Select All: Select all the channels in the list.

Deselect All: Deselect all the channels that are selected using the Select function.

Add: Add a deleted channel again.
9.3.3
MagicInfo Lite
MENU [m]
Support
Contents Home
MagicInfo Lite
ENTER [
]
Press the MagicInfo Lite button on the remote control.
MagicInfo Lite Player allows you to play content (image, video, document files) at a desired time.
You can play content saved in internal memory or USB memory. You can also play content via MagicInfo
Lite Server after connecting to a network.
For further details about how to use MagicInfo Lite Server, refer to 195 page the MagicInfo Lite Server
user manual.
9.3.4
AllShare Play
MENU [m]
Support
Contents Home
AllShare Play
ENTER [
]
Enjoy videos, photos, music files saved on a USB Mass Storage Class (MSC) device.
Refer to 173 page for details about the AllShare Play menu.
9 Support
171
9
Support
9.3.5 Source
Source allows you to select a variety of sources and change source device names.
You can display the screen of a source device connected to the product. Select a source from Source
List to display the screen of the selected source.
The input source can also be changed by using the SOURCE button on the remote control.
The screen may not display correctly if an incorrect source is selected for the source device you want to
convert to.
Edit Name
MENU [m]
ENTER [
Support
Contents Home
Source
TOOLS
Edit Name
]
You can rename a connected source device.

Sometimes the screen will not display properly unless the name of a source device is specified in
Edit Name. In addition, it is best to rename the source device in Edit Name to obtain optimal picture
quality.
The list can include the following source devices. Source devices on the list differ depending on the
selected source.

VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder /
PC / DVI PC / DVI Devices / TV / IPTV / Blu-ray / HD DVD / DMA
Available settings in the Picture menu depend on the current source and settings made in Edit Name.

When connecting a PC to the HDMI IN port with HDMI cable, you should set the product to PC
mode under Edit Name.

When connecting a PC to the HDMI IN port with HDMI to DVI cable, you should set the product to
DVI PC mode under Edit Name.

When connecting an AV devices to the HDMI IN port with HDMI to DVI cable, you should set the
product to DVI Devices mode under Edit Name.
Information
MENU [m]
ENTER [
Support
Contents Home
Source
TOOLS
Information
]
You can see detailed information about the selected external device.
9 Support
172
10
AllShare Play
Enjoy videos, photos, music files saved on a USB Mass Storage Class (MSC) device.
10.1 What is AllShare Play?
Play photo, video or music files saved on a storage device. Wirelessly connect a smartphone to a PC
using a wireless network.
Play various content using one of the following methods in AllShare Play:

Using internal memory and a USB device: Play video, photo and music files from a USB device.
Copy the files to the internal memory.

Connecting to a PC over a network: Play photo, video and music files saved on a PC through a
network connection.
Allshare Play can also be accessed by pressing CONTENET(HOME) on the remote control.
10.1.1 Read the following before using AllShare Play with a USB device
Caution

Before connecting a USB device to the product, back up files to ensure your data is not damaged or
lost. Samsung Electronics is not liable for any damage or loss of data.

Do not remove a USB device while it is loading.

If a USB device is connected using a USB extension cable, the USB device may not be recognized
or files saved on the device may not be able to be read.

If the product does not recognize a connected USB device, the files on the USB device may be
corrupted or may not be able to be played. If this occurs, connect the USB device to the PC to
format the device, then make sure the device is connected properly.

USB HDD greater than 2TB is not supported.
Compatible devices with AllShare Play

Some types of USB devices, digital cameras and audio devices may not be compatible with the
product.

AllShare Play is only compatible with USB MSC devices.

MSC device refers to a Mass Storage Class Bulk-Only Transport device. Examples of MSC devices
include Thumb drives, Flash card readers and USB HDDs. (USB hubs are not supported.) These
MSC devices must be connected directly to a USB port on the product.

If more than one Picture Transfer Protocol (PTP) device is connected, only one will work at a time.

If multiple MSC devices are connected, some devices may not be recognized. USB devices that
require high power (higher than 500mA or 5V) may not be supported.

If an overheating warning message appears when a USB device is connected or used, the USB
device may not be recognized or function properly.
10 AllShare Play
173
10

AllShare Play
The screensaver activates if the product is left idle for a period of time specified in Auto Protection
Time.

Power-saving mode on some external hard disk drives may automatically deactivate after
connecting to the product.
File system and formats

Allshare play may not function properly with unlicensed multimedia files.

Media Transfer Protocol (MTP) is not supported.

Supported file systems include FAT16, FAT32 and NTFS (read only).

AllShare Play supports the sequential JPEG format. It does not support the progressive JPEG
format.

Images with a higher resolution take longer to be displayed on the screen.

The maximum JPEG resolution supported is 15360x8640 pixels.

If a file is incompatible or corrupted, a message "Not Supported File Format" appears.

When sorting files in folder view mode, a maximum of 1000 files can be displayed in each folder.

If a USB device contains 8000 files and folders or more, some files and folders may not open.

DRM MP3 files downloaded from websites that charge a fee cannot be played. Digital Rights
Management (DRM) refers to a system for protecting the copyrights of data circulated via the
Internet or other digital media by enabling secure distribution and/or disabling illegal distribution of
the data.
10 AllShare Play
174
10
AllShare Play
10.1.2 Using a USB device
Connecting a USB device
1
2
Turn on your product.
Connect a USB device containing photo, music and/or movie files to the USB port on the back or
side panel of the product.
3
A message "Connected Device" appears when the USB device is connected properly. Select type
of content to play from Videos, Photos, and Music.

If only one USB device is connected, files saved on the USB device are displayed automatically.

To view content saved on a USB device, connect the USB device to a USB port on the product.

It is recommended to use a USB HDD that has a power adapter.
Removing a USB device
It is recommended to remove a USB device using the Safely Remove USB function.
Removing a USB device from Source
1
Press SOURCE on the remote control. Alternatively, go to Source using the OSD menu.
MENU [m]
2
3
Support
Contents Home
Source
ENTER [
]
Select a USB device and press TOOLS on the remote control. Tools option appears.
Select Safely Remove USB and wait until the USB device is disconnected. The USB device is
disconnected.
Deleting AllShare Play from the screen
1
Go to the AllShare Play page.
MENU [m]
2
3
4
Support
Contents Home
Select all options except My List and press
AllShare Play
ENTER [
]
on the remote control.
Select a USB device and press TOOLS on the remote control. Tools option appears.
Select Safely Remove USB and wait until the USB device is disconnected. The USB device is
disconnected.
10 AllShare Play
175
10
AllShare Play
10.1.3 Connecting to a PC over a network
Play photo, video and music files saved on a PC through a network connection in AllShare Play mode.

For details on how to configure a network, refer to the section "7.1 Network Setting".

To view content saved on the PC, connect the product and PC to the same wireless router and visit
http://www.samsung.com to download the AllShare PC software.
Ensure the product and PC are connected to the same network subnet. All IP addresses are made
up of four parts separated by dots. (E.g. IP address 111.222.333.444) The product should have the
same IP address as the PC, except for the fourth part of the address, if they are connected to the
same subnet. (E.g. 111.222.333.***)
When connected to a PC over a network, AllShare Play does not support the following features.

Background Music On and Background Music Setting features

Feature that sorts files in the Videos, Photos or Music folder according to the default setting

◀◀
or
◀◀

feature during video playback

DivX DRM is not supported.

Make sure you set the Windows firewall program to permit the AllShare PC software.

When using AllShare Play mode through a network connection, available functions may vary
depending on the server as follows:


Available sorting modes may vary.

The scene search function may not be supported.

The resume function may not be available for multiple users. (The function only remembers
the point where the most recent user stopped playing a video.)

The search function may not work depending on the content information.
You may experience file stuttering while playing video content over a network connection.
10 AllShare Play
176
10
AllShare Play
10.1.4 Using the DLNA features
If you connect the product and a source device such as a cell phone or PC to the same network, you can
play media content saved on the device such as videos, photos and music.
Visit http://www.samsung.com or contact the Samsung Electronics Customer Center for more
information. Additional software may need to be installed on your mobile device. Refer to the mobile
device user manual for details.
A compatibility issue may occur if you play video after connecting your Samsung display product to a
DLNA server made by a different manufacturer.
Connect your Samsung display product to a network through AllShare Play and use the special
features provided by Samsung as follows:

Playback of various video formats (DivX, MP4, 3GPP, AVI, ASF, MKV, etc.)

Video thumbnail feature

Bookmark feature (to resume video playback)

Auto-chaptering (scene search)

Digital Content Management

Compatibility with various subtitle formats (SRT, SMI, SUB, TXT, TTXT)

Search with file names

And many others
To use the special DLNA features provided by Samsung on your PC, visit http://www.samsung.com
and download the AllShare software.
10 AllShare Play
177
10
AllShare Play
10.2 Using the Basic AllShare Play Features
MENU [m]
Support
Contents Home
AllShare Play
ENTER [
]
AllShare
A
ll
Play / My List /
Recently Played
My List
Videos
Recently played files will be displayed here.
What's New
Updated files will be displayed here.
Photos
Playlist
Music
No playlists have been created.
Create a playlist to quickly and easily access your content.
Return
The displayed image may differ depending on the model.
10.2.1 Sorting the file lists
To sort files, press D on the remote control to specify the sorting criteria.
Sort Criteria
Operation
Videos
Photos
Music
Folder view
Displays the whole folder. You can view the file
name and thumbnail by selecting the folder.
c
c
c
Title
Sorts and displays the file title in Symbol/
Number/Alphabet/Special order.
c
c
c
Latest Date
Sorts and shows files by the latest date.
c
c
Earliest Date
Sorts and shows files by the earliest date.
c
c
Monthly
Sorts and shows photo files by month.
Artist
Sorts the music file by artist in alphabetical
order.
c
Album
Sorts the music file by album in alphabetical
order.
c
Genre
Sorts music files by the Genre.
c
c
10 AllShare Play
178
10
AllShare Play
10.2.2 Playing Selected Files
1
2
Select files from the list of Videos, Photos, or Music files.
Press TOOL on the remote control and select Selection Play.
The option does not appear if a folder is highlighted by the cursor.
3
Select files and press Play.

c appears for selected files.

To select all the files in the current folder, press Select All.

To deselect all the files, press Deselect All.
10.2.3 Copying Files
1
2
3
Select files from the list of Videos, Photos, or Music files.
Select a storage device.

Internal Memory: Copy files from Internal Memory to a USB memory device.

USB: Copy files from a USB memory device to Internal Memory.
Press TOOL on the remote control and select Send.
The option does not appear if a folder is highlighted by the cursor.
4
Select files and press Send.

c appears for selected files.

To select all the files in the current folder, press Select All.

To deselect all the files, press Deselect All.
10 AllShare Play
179
10
AllShare Play
10.2.4 Creating a Playlist (Playlist)
Create a list of files you want to play continuously.
1
2
Select files from the list of Videos, Photos, or Music files.
Press TOOL on the remote control and select Add to Playlist.
The option does not appear if a folder is highlighted by the cursor.
3
Select files and press Add.
The Add to Playlist page appears.
4
5
6

c appears for selected files.

To select all the files in the current folder, press Select All.

To deselect all the files, press Deselect All.
Select Create New. The Create a new Playlist. page appears.
Enter a playlist name using the remote control and select Done.
A playlist is created.
To play the created playlist, select Play.
To return to the list of files, select OK.
7
A created playlist (Playlist) is displayed in My List.
10 AllShare Play
180
10
AllShare Play
10.3 My List
MENU [m]
Support
Contents Home
AllShare Play
My List
ENTER [
]
Access desired content more conveniently and quickly.
To play files, select files or a playlist (Playlist) and press [

].
Recently Played: Display video, photo or music files that were recently played. This mode is
suitable when playing files again that were played before.

What's New: Display new video, photo or music files that were uploaded to a PC or USB device.
This mode is suitable when playing new files that were recently uploaded.

Playlist: Display playlist (Playlist) files saved on a PC or USB device. To play a playlist (Playlist),
select the desired playlist (Playlist).
10.3.1
My List options
Option Name
Operations
Recently
Played
What's New
Playlist
c
c
Play
Play a selected file or playlist
(Playlist).
c
Remove
Delete a selected file.
c
Delete
Delete a selected playlist
(Playlist).
c
Edit Playlist
Edit a selected playlist
(Playlist).
c
Information
View information about a
selected file or playlist
(Playlist).
c
c
c
10 AllShare Play
181
10
AllShare Play
10.4 Videos
MENU [m]
Support
Contents Home
AllShare Play
Videos
ENTER [
]
10.4.1 Playing a Video
Select the internal memory or a USB device. Select a file from the list of files.
Press the [
] button or [
▶
] (Play) button.

The file name appears on the top with its playing time.

If video time information is unknown, the playing time and progress bar are not displayed.

During video playback, you can search using the
buttons.
You can use the [ ◀◀ ] (REW),
(FF), [ ] (Pause), [ ] (Stop), and [ ▶ ] (Play) buttons on
the bottom of your remote during playback. ( ◀◀ 3 / ◀◀ 2 / ◀◀ 1 /
1/
2/
3)
◀◀
◀◀

◀◀

and
◀◀
1
2
Press the RETURN button to exit the movie.s
Using the Play Continuously Function (Resume Play)
If you exit a movie when it is playing, you can play the movie later from the point where you stopped it.
The Resume function does not support multiple users. (It will only memorize the point where the most
recent user stopped playing.)
1
2
3
Select a file from the list of files.
Press the [
▶
] (Play) or [
] button.
The Movie will begin to play from where you stopped it.

Resume is only available when you resume playing a movie you had stopped.

Press the [
] button for pause.
10 AllShare Play
182
10
AllShare Play
10.5 Photos
MENU [m]
Support
Contents Home
AllShare Play
Photos
ENTER [
]
10.5.1 Viewing a Photo (or Slide Show)
1
2
Select the internal memory or a USB device. Select a file from the list of files.
Press the [
] button.

To view files manually, one at a time, press the left or right arrow buttons.

To start the slide show, press the [

During the slide show, all files in the file list are displayed in order, starting from the file you
▶
] (Play) button when the file you selected is displayed.
selected.

When you press the [

During a slide show, press the TOOLS button to access additional functions such as Go to
Photos List, Stop Slide Show, Slide Show Speed, Slide Show Effect, Background
Music On / Background Music Off, Background Music Setting, Picture Mode, Sound
Mode, Zoom, Rotate and Information.

You can add background music to a slide show if you have music files on your USB device or
PC by setting Background Music to On in the Tools menu, and then selecting music files to
play.

If you select the wrong background music, you cannot change the music until the BGM
(Background music) has finished loading.

You can use the [
▶
] (Play) button in the file list, the slide show will start immediately.
] (Pause), [
] (Stop), and [
▶
] (Play) buttons on the bottom of your
remote during a slide show.

When you press the [
] (Stop) or [
] (Return) button, the slide show stops and the main
photo screen re-appears.
10 AllShare Play
183
10
AllShare Play
10.6 Music
MENU [m]
Support
Contents Home
AllShare Play
Music
ENTER [
]
10.6.1 Playing Music
Select the internal memory or a USB device. Select a file from the list of files.
Press the [

] button or [
▶
] (Play) button.
When the music is playing, you can search using the [ ◀◀ ] (REW) and [
◀◀
1
2
] (FF) button.
If the sound is abnormal when you play MP3 files, adjust the Equalizer in the Sound menu. (An overmodulated MP3 file may cause a sound problem.)
10 AllShare Play
184
10
AllShare Play
10.7 Videos / Photos / Music Play Option menu
When playing video or photo files, you can press the TOOLS button to display an Options menu.
Below are a series of tables listing the options available and the media each option applies to.
Option Name
Operations
Videos
Photos
Music
View
Sort music files grouped by Folder view, Title,
Artist, Album or Genre.
c
Selection Play
Select and play files from a list of music files.
c
Play Current
Group
Play files from the same group of the file
currently playing.
c
Go to Videos List
Return to the list of video files.
Go to Photos
List
Return to the list of photo files.
Go to Playlist
Go to My List.
Play from the
Beginning
Play again the currently playing video from the
beginning.
c
Scene Search
You can use the Scene Search function
during playback to view or start a movie from
the scene of your choice.
c
Title Search
You can move directly to another Title.
c
Time Search
You can search the movie using
buttons at intervals of 1 minute.
c
Subtitle
You can view a subtitle. You can select a
specific language if the subtitle file contains
multiple languages.
c
Repeat Mode
You can play movie and music files repeatedly.
c
Picture Size
You can adjust the picture size to your
preference.
c
Picture Mode
You can change the Picture Mode.
c
c
Sound Mode
You can change the Sound Mode.
c
c
Audio Language
You can enjoy video in one of supported
languages. The function is enabled only when
you play stream-type files which support
multiple audio formats.
c
c
c
c
and
10 AllShare Play
185
10
AllShare Play
Option Name
Operations
Videos
Subtitle Setting
Displays the Subtitle Setting. You can set up
a subtitle option.
c
Start Slide Show
/ Stop Slide
Show
You can start or stop a slide show.
Slide Show
Speed
You can select the slide show speed during
Alternatively, use the
remote.
▶
or
II
Photos
Music
c
button on the
the slide show. Alternatively, use the
◀◀
c
or
button on the remote.
◀◀
Slide Show
Effect
You can set various slide show effects.
c
Background
Music On / Off
You can start or stop background music.
c
Background
Music Setting
You can set and select background music
when watching a photo file or slide show.
c
Zoom
You can zoom into images in full screen mode.
c
Rotate
You can rotate images.
c
Information
View file information.
c
c
c

Pressing the INFO button while a device name is selected will display information about the
selected device.

Pressing the INFO button while a file is selected will display information about the selected file.
10 AllShare Play
186
10
AllShare Play
10.8 Supported Subtitle and AllShare Play file formats
10.8.1 Subtitle
External

MPEG-4 timed text (.ttxt)

SAMI (.smi)

SubRip (.srt)

SubViewer (.sub)

Micro DVD (.sub or .txt)

SubStation Alpha (.ssa)

Advanced SubStation Alpha (.ass)

Powerdivx (.psb)
Internal

Xsub
Container: AVI

SubStation Alpha
Container: MKV

Advanced SubStation Alpha
Container: MKV

SubRip
Container: MKV

MPEG-4 timed text
Container: MP4
10.8.2 Supported image resolutions
File Extension
*.jpg
*.jpeg
Type
Resolution
JPEG
15360 x 8640
*.png
PNG
*.bmp
BMP
*.mpo
MPO
15360 x 8640
Comments
1920 x 1080
10.8.3 Supported music file formats
File Extension
Type
Codec
*.mp3
MPEG
MPEG1 Audio Layer 3
MPEG4
AAC
*.m4a
*.mpa
*.aac
*.3ga
10 AllShare Play
187
10
AllShare Play
File Extension
Type
*.flac
Codec
FLAC
FLAC
Comments
The Seek (jump) function is not
supported.
Supports up to 2 channel
*.ogg
OGG
Vorbis
Supports up to 2 channel
*.wma
WMA
WMA
Supports up to WMA 10 Pro 5.1
channel. WMA lossless audio is not
supported.
10.8.4 Supported Video Formats
File
Extension
Container
Video Codec
Resolution
Frame rate
(fps)
Bit rate
(Mbps)
DIVX 3.11 / 4.x /
5.x / 6.x
*.avi
*.mkv
*.asf
MPEG4 SP /
ASP
*.wmv
*.mp4
*.mov
*.3gp
*.vro
*.mpg
*.mpeg
*.ts
*.tp
*.trp
*.mov
*.flv
Audio
Codec
AC3
AVI
H.264 BP / MP /
HP
MKV
ASF
LPCM
1920 x 1080
Motion JPEG
VRO
VOB
HE-AAC
Window Media
Video v9
WMA
DD+
MPEG2
MPEG(MP3)
PS
TS
*.vob
ADMPCM(I
MA, MS)
AAC
6 ~ 30
MP4
3GP
30
DTS Core
MPEG1
VP6
640 x 480
4
G.711(ALaw, μ-Law)
*.svi
SVAF
*.m2ts
30
*.mts
MVC
*.divx
*.webm
WebM
VP8
1920 x 1080
24 / 25 / 30
40
6 ~ 30
8
Vorbis
10 AllShare Play
188
10
AllShare Play

Video content will not play, or not play correctly, if there is an error in the content or the container.

Sound or video may not work if the contents have a standard bitrate/frame rate above the
compatible Frame/sec listed in the table above.

If the Index Table is in error, the Seek (Jump) function is not supported.

You may experience file stuttering while playing a video through a network connection.

Video content can not be played, if there are many contents in one file.

When you play video over a network connection, the video may not be played smoothly.

The menu may take longer to appear if the video’s bit rate exceeds 10Mbps.

Some USB/digital camera devices may not be compatible with the player.
Video Decoder
Supports up to H.264, Level 4.1
H.264 FMO / ASO / RS, VC1 SP / MP / AP L4
and AVCHD are not supported.
For all Video codecs except MVC, VP8, VP6:
- Below 1280 x 720: 60 frame max
Audio Decoder
Supports up to WMA 10 Pro 5.1 channel.
WMA lossless audio is not supported.
QCELP, AMR NB/WB are not supported.
If Vorbis is only in Webm container, supports up
to 2 channel.
- Above 1280 x 720: 30 frame max
GMC 2 or higher is not supported.
Supports only SVAF Top/Bottom and Side by
Side.
Supports only BD MVC Spec.
10 AllShare Play
189
11
MagicInfo Lite
11.1 File Formats Compatible with MagicInfo Lite Player
[Read before using MagicInfo Lite Player]

The file system supports FAT16, FAT32 and NTFS.

A file with a vertical and horizontal resolution larger than the maximum resolution cannot be
played.
Check the vertical and horizontal resolution of the file.

Video that does not contain audio data is not supported. Check that the video file contains audio
data.

Check the supported video and audio Codec types and Versions.

Check the supported file versions.

Flash version up to 10.1 is supported

PowerPoint version up to 97 – 2007 is supported

Content with a size of 2GB or larger cannot be assigned to a Network Schedule.

The first USB device connected is only recognized.
11 MagicInfo Lite
190
11
MagicInfo Lite
11.1.1 Contents
File
Extension
Container
*.avi
Video Codec
Resolution
Frame rate
(fps)
Bit rate
(Mbps)
Audio
Codec
DIVX 3.11 / 4.x /
5.x / 6.x
*.mkv
*.asf
MPEG4 SP /
ASP
*.wmv
*.mp4
*.mov
AVI
*.3gp
MKV
*.vro
ASF
*.mpg
MP4
*.mpeg
3GP
*.ts
VRO
*.tp
VOB
*.trp
PS
*.flv
TS
*.vob
AC3
LPCM
H.264 BP / MP /
HP
AAC
1920 x 1080
Motion JPEG
30
HE-AAC
WMA
6 ~ 30
DD+
MPEG(MP3)
Window Media
Video v9
DTS Core
G.711(ALaw, μ-Law)
MPEG2
*.svi
*.m2ts
MPEG1
*.mts
*.divx
VP6
640 x 480
4
11 MagicInfo Lite
191
11
MagicInfo Lite
Video

Video content without audio is not supported.

3D video is not supported.

Content with a resolution larger than the resolution specified in the table above is not supported.

Video content with a Bit rate or Frame rate larger than the rate specified in the table above can
cause choppy video during playback.

Video content will not play, or not play correctly, if there is an error in the content or the container.

Some USB/digital camera devices may not be compatible with the player.

Supports up to H.264, Level 4.1

H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not supported.

For all Video codecs except MVC, VP8, VP6:

Below 1280 x 720: 60 frame max

Above 1280 x 720: 30 frame max

GMC 2 or higher is not supported.

Supports only SVAF Top/Bottom and Side by Side.

Supports only BD MVC Spec.
Audio

Audio content without video is not supported.
(Only mp3 files are supported as background music for image/PPT slideshows. This feature is
available only when using the network schedule menu.)

Audio content with a Bit rate or Frame rate larger than the rate specified in the table above can
cause choppy audio during playback.

Video content will not play, or not play correctly, if there is an error in the content or the container.

Some USB/digital camera devices may not be compatible with the player.

Supports up to WMA 10 Pro 5.1 channel. WMA lossless audio is not supported.

QCELP, AMR NB/WB are not supported.
Image

Compatible image file format : Jpeg

Supported maximum resolution : 15,360 x 8640

Supported image effects : 8 effects (Fade1, Fade2, Blind, Spiral, Checker, Linear, Stairs,
Wipe)
11 MagicInfo Lite
192
11
MagicInfo Lite
Flash

Compatible with Flash 10.1

Flash Animation


Compatible file format : SWF
Resolution : 1280 x 720

Caution
-
Performance comparable to Flash Player on a Windows operating system cannot be
guaranteed

Optimization is needed during content creation
Flash Video

Compatible file format : FLV

Video

-
Codec : H.264 BP
-
Resolution : 1920 x 1080
Audio
-

Codec : H.264 BP
Caution
-
F4V file format is not supported
-
Screen Video is not supported
Power Point


Compatible document file formats

Extension : ppt, pptx

Version : Office 97 ~ Office 2007
Functions not supported

Animation effect

3D shapes (which will be displayed in 2D)

Header and footer (some subitems are not supported)

Word Art

Align (A group alignment error may occur)

Office 2007 (SmartArt is not fully supported. 97 out of 115 subitems are supported.)

Object insertion

Opening encrypted documents

Vertical text (some subitems are not supported)

Slide notes and handout
11 MagicInfo Lite
193
11
MagicInfo Lite
PDF

Compatible document file formats


Extension : pdf
Functions not supported

Content less than 1 pixel not supported because of performance degradation issue.

Masked Image, Tiled Image content not supported.

Content with Rotated Text, not supported.

3D Shadow Effects not supported.
11 MagicInfo Lite
194
11
MagicInfo Lite
11.2 MagicInfo Lite Player
11.2.1
Network Schedule
Connecting to a server
Network setup
To run MagicInfo Lite, connect to a network.
Refer to 126 page for details about the Network Settings menu.
Server setup
Go to MENU
Network
MagicInfo Lite Settings
Server. Next, enter the server information.
(E.g.: http://192.168.0.10:7001/MagicInfo/)
Server
Server
http://192.168.0.10:70
FTP Mode
Passive
Default Storage
Internal Memory
Configuring the FTP mode and default storage space

FTP Mode
Specify the FTP operating mode. (Active or Passive)

Default Storage: Specify the location you want to save content (downloaded from the server) to.

Internal Memory: Save the content to the internal memory of the product.

USB: Save the content to USB memory.
If a network schedule is running when USB memory is not connected, the default content will
run.
11 MagicInfo Lite
195
11
MagicInfo Lite
MagicInfo Lite Settings
MENU [m]
Support
Contents Home
MagicInfo Lite
ENTER [
]
Press the MagicInfo Lite button on the remote control.
You can view whether the server is connected (approval) in the MagicInfo Lite menu screen. To view
whether the server is connected when a network schedule is running, press INFO on the remote.
1
Select MagicInfo Lite Player in the MagicInfo Lite menu.
MagicInfo Lite
MagicInfo Lite Player
Local Schedule Manager
Content Manager
Close
Settings
Mode
Server
USB
Local Schedule
Connected
Connected
Return
2
Select Network Schedule in the MagicInfo Lite Player menu.
MagicInfo Lite Player
Network Schedule
Local Schedule
Internal AutoPlay
Close
USB AutoPlay
Mode
Server
USB
Local Schedule
Connected
Disconnected
Return
11 MagicInfo Lite
196
11
MagicInfo Lite
Approving a connected device from the server
1
Access the server you have assigned to your device.
2
3
Enter your ID and password to log in.
4
Select Lite Device from the menus on the left.
Select Device from the top menu bar.
11 MagicInfo Lite
197
11
MagicInfo Lite
5
Select View Unapproved Lite Device from the sub-menus of Lite Device.
6
7
Select the Approve button for your device from the list of unapproved Lite devices.
Enter the information required to approve the device.

Device Name: Enter the device name.

Device Model Name: Select your device model.

Device Group: Select

Location: Enter the current location of the device.
to specify the group.
Pressing the INFO button on the remote when a network schedule is running will display the
details of the schedule. Check that the correct device has been selected by viewing the device ID
in the details.
8
Select the View All Lite Device menu to check that the device has been registered.
9
When the device is approved by the server, the schedule registered in the selected group will be
downloaded to the device. The schedule will run after it is downloaded.
11 MagicInfo Lite
198
11
MagicInfo Lite

For further details on how to configure a schedule, refer to the <MagicInfo server user's manual>.

If a device is deleted from the list of devices approved by the server, the device will reboot to reset
its settings.
Setting the current time
A schedule may not run if the time set on the device is different from the server's current time.
1
Go to the tabs Device
2
3
Select your device.
Time.
Select Clock Set, and sync the time with the server.
For further details on how to manage the time (scheduling, holiday management, etc.), refer to the
<MagicInfo server user's manual>.
11 MagicInfo Lite
199
11
MagicInfo Lite
11.2.2
Local Schedule
Run a schedule created by Local Schedule Manager.
Go to Local Schedule Manager
Select the content you want to run
This menu is disabled if there was no schedule run previously in Local Schedule Manager.
1
Select Local Schedule in the MagicInfo Lite Player menu screen.
Run a schedule create by Local Schedule Manager.
MagicInfo Lite Player
Network Schedule
Local Schedule
Internal AutoPlay
Close
USB AutoPlay
Mode
Server
USB
Local Schedule
Connected
Connected
Return
2
Run a schedule created by local schedule.
11 MagicInfo Lite
200
11
MagicInfo Lite
11.2.3
Internal AutoPlay
Running Internal AutoPlay
The option is enabled only when there is at least one content item, except for music files, in Internal
Memory.
1
Select Internal AutoPlay in the MagicInfo Lite Player menu screen.

Play content, which has been copied to Internal Memory, in alphabetical order.
MagicInfo Lite Player
Network Schedule
Local Schedule
Internal AutoPlay
Close
USB AutoPlay
Mode
Server
USB
Local Schedule
Connected
Connected
Return
11 MagicInfo Lite
201
11
MagicInfo Lite
11.2.4
USB AutoPlay
Running Internal AutoPlay
1

The option is enabled only when there is at least one content item, except for music files, in USB
AutoPlay.

Ensure a USB device is inserted. Be sure to create a folder named "MagicInfoSlide" in the USB
device and put content in the folder.

USB AutoPlay automatically runs when a USB device is connected, regardless of whether the
Internal Memory is running.
Select USB AutoPlay in the MagicInfo Lite Player menu screen.

The content contained in the MagicInfoSlide folder on the USB device will play in alphabetical
order.

USB AutoPlay will automatically run if USB memory is connected when Network Schedule or
Local Schedule is running.
MagicInfo Lite Player
Network Schedule
Local Schedule
Internal AutoPlay
Close
USB AutoPlay
Mode
Server
USB
Local Schedule
Connected
Connected
Return
11 MagicInfo Lite
202
11
MagicInfo Lite
11.3 Local Schedule Manager
Configure the settings for playback from Local Schedule. Alternatively, select and play content from
internal or USB memory according to the customized playback sequence.
11.3.1 Registering a Local Schedule
1
Select Local Schedule Manager in the MagicInfo Lite menu screen.
MagicInfo Lite
MagicInfo Lite Player
Local Schedule Manager
Content Manager
Close
Settings
Mode
Server
USB
Local Schedule
Connected
Connected
Return
2
Select Create in the Local Schedule Manager screen.
Local Schedule Manager
Storage
Internal Memory
No Playing Schedule
Create
Edit
Delete
Run
Info
Copy
Close
Return
11 MagicInfo Lite
203
11
3
MagicInfo Lite
Select Time to set the time you want to play content.
Create
Time
12
:
--:-- am ~ --:-- pm
00
am ~
Content
Time
12
:
00
am
No Item
--:-- am ~ --:-- pm
Content
Save
No Item
Cancel
Return

A maximum of 24 schedules can be created.

If more than one schedule is created, the start time must be different for each schedule.
(Example of an incorrect setting: 12:00 am - 12:00 am / 12:00 am - 11:00 pm)
4
Select Content to specify the content you want to play.
Content
Internal Memory
USB
No Item
Folder1
1
Menu1.jpg
2
Menu2.jpg
OK
Deselect
Cancel
Duration
Return
A maximum of 99 content files can be selected.
11 MagicInfo Lite
204
11
5
MagicInfo Lite
Select Duration
Duration
Content
Duration
Menu1.jpg
00:00:05
Menu2.jpg
00:00:05
Up
Down
Save
Cancel
Return
Specify the sequence and time duration to play content files.

Changing the playing sequence
Select a content file and change the sequence using the Up or Down button.

Duration
Set the duration to play content.

Duration cannot be specified for videos.

Duration must be at least 5 seconds.
Press Save to save the settings.
6
Select Save.
Select the memory space you want to save the content to.
Create
Time
Content
Time
m
12:00 am ~ 12:00 pm
Menu1.jpg Menu2
--:-- am
--:--want
pm to save?
W
Where
do ~you
Content
n
Internal
Intern
Time
Content
Delete
No Item
USB
Save
Cancel
Cancel
--:-- am ~ --:-- pm
No Item
Return
11 MagicInfo Lite
205
11
7
MagicInfo Lite
Check that the schedule has been added to the Local Schedule Manager.
Local Schedule Manager
Storage
Internal Memory
No Playing Schedule
Create
Edit
Delete
All Schedule
2012.01.01_1834.lsch
Run
Info
Copy
Close
Return
11 MagicInfo Lite
206
11
MagicInfo Lite
11.3.2 Modifying a Local Schedule
Ensure at least one Local Schedule is registered.
1
Select Local Schedule Manager in the MagicInfo Lite menu screen.
MagicInfo Lite
MagicInfo Lite Player
Local Schedule Manager
Content Manager
Close
Settings
Mode
Server
USB
Local Schedule
Connected
Connected
Return
2
Select the local schedule you want to modify.
Local Schedule Manager
Storage
Internal Memory
No Playing Schedule
Create
Edit
Delete
All Schedule
2012.01.01_1834.lsch
Run
Info
Copy
Close
Return
3
Select Edit.
11 MagicInfo Lite
207
11
4
MagicInfo Lite
Change the details of the local schedule. Next, select Save.
Edit
Time
Content
Time
Content
Time
Content
12:00 am ~ 12:00 pm
Delete
Menu1.jpg Menu2
--:-- am ~ --:-- pm
No Item
Save
Cancel
--:-- am ~ --:-- pm
No Item
Return
11 MagicInfo Lite
208
11
MagicInfo Lite
11.3.3 Deleting a Local Schedule
Ensure at least one Local Schedule is registered.
1
Select Local Schedule Manager in the MagicInfo Lite menu screen.
MagicInfo Lite
MagicInfo Lite Player
Local Schedule Manager
Content Manager
Close
Settings
Mode
Server
USB
Local Schedule
Connected
Connected
Return
2
Select the local schedule you want to delete. Next, select Delete.
Local Schedule Manager
Storage
Internal Memory
No Playing Schedule
Create
Edit
Delete
All Schedule
2012.01.01_1834.lsch
Run
Info
Copy
Close
Return
11 MagicInfo Lite
209
11
MagicInfo Lite
11.3.4 Running a Local Schedule
Ensure at least one Local Schedule is registered.
1
Select Local Schedule Manager in the MagicInfo Lite menu screen.
MagicInfo Lite
MagicInfo Lite Player
Local Schedule Manager
Content Manager
Close
Settings
Mode
Server
USB
Local Schedule
Connected
Connected
Return
2
Select the local schedule you want to run. Next, select Run.
Local Schedule Manager
Storage
Internal Memory
No Playing Schedule
Create
Edit
Delete
All Schedule
2012.01.01_1834.lsch
Run
Info
Copy
Close
Return
11 MagicInfo Lite
210
11
MagicInfo Lite
11.3.5 Stopping a Local Schedule
This function is enabled only when a schedule is running. Selecting Stop will change the running
mode from local schedule to network schedule.
1
Select Local Schedule Manager in the MagicInfo Lite menu screen.
MagicInfo Lite
MagicInfo Lite Player
Local Schedule Manager
Content Manager
Close
Settings
Mode
Server
USB
Local Schedule
Connected
Connected
Return
2
Select Stop.
Local Schedule Manager
Storage
Internal Memory
[Internal]2012.01.01_1834.lsch
Create
Edit
Edit
Delete
All Schedule
2012.01.01_1834.lsch
Stop
Info
Copy
Copy
Close
Return
11 MagicInfo Lite
211
11
MagicInfo Lite
11.3.6 Viewing the details of a Local Schedule
1
Select Local Schedule Manager in the MagicInfo Lite menu screen.
MagicInfo Lite
MagicInfo Lite Player
Local Schedule Manager
Content Manager
Close
Settings
Mode
Server
USB
Local Schedule
Connected
Connected
Return
2
Select the local schedule you want to view the details of.
Local Schedule Manager
Storage
Internal Memory
No Playing Schedule
Create
Edit
Delete
All Schedule
2012.01.01_1834.lsch
Run
Info
Copy
Close
Return
11 MagicInfo Lite
212
11
3
MagicInfo Lite
The details of the schedule will be displayed.
Information
2012.01.01_1834.lsch
12:00 am~12:00 pm, 2 File(s)
- Menu1.jpg Menu2.jpg
Close
Return
11 MagicInfo Lite
213
11
MagicInfo Lite
11.3.7 Copying a Local Schedule (Local Schedule)
1
Select Local Schedule Manager in the MagicInfo Lite menu screen.
MagicInfo Lite
MagicInfo Lite Player
Local Schedule Manager
Content Manager
Close
Settings
Mode
Server
USB
Local Schedule
Connected
Connected
Return
2
Select a storage device where the local schedule files to copy are saved.
Local Schedule Manager
Internal Memory
Internal Memory
Storage
Playing Schedule
No P
USB
Create
Edit
Delete
All Schedule
2012.01.01_1834.lsch
Run
Info
Copy
Close
Return

Internal Memory: Copy local schedules from Internal Memory to a USB memory device.

USB: Copy local schedules from a USB memory device to Internal Memory.
11 MagicInfo Lite
214
11
3
MagicInfo Lite
Select local schedule files and press Copy.
Local Schedule Manager
Storage
Internal Memory
No Playing Schedule
Create
Edit
Delete
All Schedule
2012.01.01_1834.lsch
Run
Info
Copy
Close
Return
4
A window appears asking if you want to copy the files to the Internal Memory or USB memory
device. Select Yes to copy the files.
11 MagicInfo Lite
215
11
MagicInfo Lite
11.4 Content Manager
11.4.1 Copying content
1
Select Content Manager in the MagicInfo Lite menu screen.
MagicInfo Lite
MagicInfo Lite Player
Local Schedule Manager
Content Manager
Close
Settings
Mode
Server
USB
Local Schedule
Connected
Connected
Return
2
Select the content you want to copy. Next, select Copy.

If content under Internal Memory is selected: You can copy the content under Internal
Memory to USB memory.

If content under USB is selected: You can copy the content under USB memory to Internal
Memory.
Selecting content under Internal Memory and USB memory at the same time will disable
copying.
Content Manager
Internal Memory
USB
No Item
Folder1
Menu1.jpg
Menu2.jpg
Copy
Free Space
5549.2MB
Free Space
6227.2MB
Selected File(s)
0.0MB (0)
Selected File(s)
0.1MB (1)
Select
Delete
Close
Return
11 MagicInfo Lite
216
11
MagicInfo Lite
11.4.2 Deleting content
1
Select Content Manager in the MagicInfo Lite menu screen.
MagicInfo Lite
MagicInfo Lite Player
Local Schedule Manager
Content Manager
Close
Settings
Mode
Server
USB
Local Schedule
Connected
Connected
Return
2
Select the content you want to delete. Next, select Delete.

Content under Internal Memory and USB memory can be deleted at the same time.
Content Manager
Internal Memory
Menu3.jpg
USB
Folder1
Menu4.jpg
Menu1.jpg
Menu2.jpg
Copy
Free Space
5549.2MB
Free Space
6227.2MB
Selected File(s)
0.0MB (0)
Selected File(s)
0.2MB (2)
Select
Delete
Close
Return
11 MagicInfo Lite
217
11
MagicInfo Lite
11.5 Settings
Settings
Content Default Duration
Content Ratio
Image Effect
None
Default Content
Menu1.jpg
Screen Layout
Landscape
Close
Delete All Content
Safety Remove USB
Return
11.5.1
Content Default Duration
Specify the duration to play content.

Image Viewer Time, PPT Viewer Time, PDF Viewer Time, Flash Viewer Time
The duration must be at least 5 seconds.
11.5.2
Content Ratio
Specify the display aspect ratio by type when playing content.

PPT Ratio, PDF Ratio, Video Ratio

Original: Display content with the original size.

Full Screen: Display content in full screen.
11.5.3 Image Effect
Configures the image transition effects.

None, Fade1, Fade2, Blind, Spiral, Checker, Linear, Stairs, Wipe, Random
11.5.4
Default Content
Specify the content to play by default when launching MagicInfo Lite.
11 MagicInfo Lite
218
11
MagicInfo Lite
11.5.5
Screen Layout
Change the screen orientation to landscape or portrait view.

Landscape / Portrait
11.5.6
Delete All Content
Delete all the content files in Internal Memory.
11.5.7
Safety Remove USB
Safely removes USB memory
11 MagicInfo Lite
219
11
MagicInfo Lite
11.6 When Content is Running
11.6.1 Viewing the details of the content that is running
Press the INFO button on the remote control.

Software Version: Displays the software version of a device

Device Name: Displays the name of a device recognized by the server

Device ID: Displays the original identification number of a device

Mode: Displays the current operating mode (Network Schedule, Local Schedule, Internal
AutoPlay or USB AutoPlay) of MagicInfo Lite Player

Server: Displays the connection status (Connected, Disconnected or Non-approval) of the server

USB: Displays the connection status of a USB device

Schedule Download: Displays the progress of a network schedule being downloaded from the
server
Information
Software Version
: A-LUBXGDSP-0100.9
Device Name
: Monitor
Device ID
: FF-FF-FF-FF-FF-FF
Mode
: Local Schedul
Server
: Disconnected
USB
: Connected
Schedule download
: No Schedule to download
Close
11 MagicInfo Lite
220
11
MagicInfo Lite
11.6.2 Changing the settings for the content that is running
Press the TOOLS button on the remote control.
Tools
Picture Mode
Standard
Sound Mode
Standard
PIP
Off
Background Music
Off
Background Music Setting
Safety Remove USB
Return
You can change the Picture Mode or Sound Mode setting or safely remove a USB device (Safely
Remove USB) while content is playing by pressing the TOOLS button on the remote control.

Picture Mode (Dynamic, Standard, Natural, Movie)
Customizes the screen settings for the content currently playing

Sound Mode (Standard, Music, Movie, Clear Voice, Amplify)
Customizes the audio settings for the content currently playing

PIP

PIP (Off / On)
Activate or deactivate the PIP function.

Background Music (Off / On)
Activate or deactivate the Background Music function.

Background Music Setting (Shuffle / Play / Cancel / Deselect)
Set music files saved in the Internal Memory as background music.

Safely Remove USB
Safely removes USB memory
11 MagicInfo Lite
221
12
Troubleshooting Guide
12.1 Requirements Before Contacting Samsung Customer
Service Center
12.1.1 Testing the Product
Before calling Samsung Customer Service Center, test your product as follows. If the problem persists,
contact Samsung Customer Service Center.
Check if your product is operating normally by using the product test function.
If the screen remains blank while the power LED blinks even when the product is correctly connected to
a PC, perform product testing.
1
2
3
4
Power off both the PC and product.
Disconnect all the cables from the product.
Power on the product.
If "No Cable Connected" is displayed, the product is operating normally.
If the screen remains blank, check the PC system, video controller and cable.
12.1.2 Checking the Resolution and Frequency
"Not Optimum Mode" will briefly be displayed if a mode that exceeds a supported resolution is selected
(refer to Supported Resolutions).
12 Troubleshooting Guide
222
12
Troubleshooting Guide
12.1.3 Check the followings.
Installation issue (PC mode)
The screen keeps switching on and off.
Check the cable connection between the
product and PC, and ensure the connection is
secure.
("2.2 Connecting and Using a PC")
Blank spaces are found at the top and bottom
of the screen when an HDMI or HDMI-DVI
cable is connected to the product and PC.
Blank spaces on the screen are not caused by
the product.
The cause of the problem is the PC or graphics
card, and can be fixed by adjusting the screen
size in the HDMI or DVI option of the graphics
card settings menu.
If the graphics card settings menu has no
option to adjust the screen size, update the
graphics card driver to the latest version.
(Please contact the graphics card or computer
manufacturer for details on how to adjust the
screen settings.)
Screen issue
The power LED is off. The screen will not
switch on.
Make sure that the power cord is connected.
"No Cable Connected" is displayed on the
screen
(refer to "Connecting to a PC").
Check that the product is connected correctly
with a cable
("2.2 Connecting and Using a PC")
("2.2 Connecting and Using a PC")
Check that the device connected to the
product is powered on.
"Not Optimum Mode" is displayed.
This message is displayed when a signal from
the graphics card exceeds the product's
maximum resolution and frequency.
Refer to the Standard Signal Mode Table and
set the maximum resolution and frequency
according to the product specifications.
The images on the screen look distorted.
Check the cable connection to the product
("2.2 Connecting and Using a PC")
12 Troubleshooting Guide
223
12
Troubleshooting Guide
Screen issue
The screen is not clear. The screen is blurry.
Adjust Coarse and Fine.
Remove any accessories (video extension
cable, etc) and try again.
Set the resolution and frequency to the
recommended level.
The screen appears unstable and shaky.
There are shadows or ghost images left on the
screen.
Check that the resolution and frequency of the
PC and graphics card are set within a range
compatible with the product. Then, change the
screen settings if required by referring to the
Additional Information on the product menu
and the Standard Signal Mode Table.
The screen is too bright. The screen is too
dark.
Adjust Brightness and Contrast.
Screen color is inconsistent.
Go to Picture and adjust the Color Space
settings.
White does not really look white.
Go to Picture and adjust the White Balance
settings.
There is no image on the screen and the power
LED blinks every 0.5 to 1 second.
The product is in power-saving mode.
Press any key on the keyboard or move the
mouse to return to the previous screen.
Sound issue
There is no sound.
Check the connection of the audio cable or
adjust the volume
("2.2 Connecting and Using a PC")
Check the volume.
The volume is too low.
Adjust the volume.
If the volume is still low after turning it up to the
maximum level, adjust the volume on your PC
sound card or software program.
12 Troubleshooting Guide
224
12
Troubleshooting Guide
Remote control issue
The remote control does not work.
Make sure that the batteries are correctly in
place (+/-).
Check if the batteries are flat.
Check for power failure.
Make sure that the power cord is connected.
Check for any special lighting or neon signs
switched on in the vicinity.
Source device issue
A beeping sound is heard when my PC is
booting.
If a beeping sound is heard when your PC is
booting, have your PC serviced.
12 Troubleshooting Guide
225
12
Troubleshooting Guide
12.2 Q & A
Question
How can I change the
frequency?
Answer
Set the frequency on your graphics card.

"Windows XP": Go to Control Panel
Themes
Display
Settings
Appearance and
Advanced
Monitor and adjust the frequency in Monitor Settings.

"Windows ME/2000": Go to Control Panel
Settings
Advanced
Display
Monitor and adjust the
frequency in Monitor Settings.

"Windows Vista": Go to Control Panel
Personalization
Advanced Settings
Personalize
Appearance and
Display Settings
Monitor and adjust the frequency in
Monitor Settings.

"Windows 7": Go to Control Panel
Personalization
Advanced Settings
Display
Appearance and
Adjust resolution
Monitor and adjust the frequency in
Monitor Settings.
12 Troubleshooting Guide
226
12
Troubleshooting Guide
Question
How can I change the
resolution?
Answer

"Windows XP": Go to Control Panel
Themes

Display
Appearance and
Settings and adjust the resolution.
"Windows ME/2000": Go to Control Panel
Display
Settings and adjust the resolution.

"Windows Vista": Go to Control Panel
Personalization
Personalize
Appearance and
Display Settings and
adjust the resolution.

"Windows 7": Go to Control Panel
Personalization
Display
Appearance and
Adjust Resolution and
adjust the resolution.
How do I set power-saving
mode?

Windows XP: Set power-saving mode in Control Panel
Appearance and Themes
Display
Screen Saver
Settings or BIOS SETUP on the PC.

Windows ME/2000: Set power-saving mode in Control
Panel
Display
Screen Saver Settings or BIOS
SETUP on the PC.

Windows Vista: Set power-saving mode in Control Panel
Appearance and Personalization
Personalize
Screen Saver Settings or BIOS SETUP on the PC.

Windows 7: Set power-saving mode in Control Panel
Appearance and Personalization
Personalize
Screen Saver Settings or BIOS SETUP on the PC.
Refer to the user manual for your PC or graphics card for further instructions on adjustment..
12 Troubleshooting Guide
227
13
Specifications
13.1 General
Model Name
Panel
DE40C
Size
40 inches (101 cm)
Display area
885.6 mm (H) x 498.15 mm (V)
34.866 inches (H) x 19.612 inches (V)
Dimensions (W x H x D)
919.6 x 532.0 x 35.1 mm
36.2 x 20.9 x 1.4 inches
Weight
13.5 kg / 29.8 Ibs
VESA
200 x 200 mm / 7.9 x 7.9 inches
Model Name
Panel
DE46C
DE55C
Size
46 inches (116 cm)
54.6 inches (138 cm)
Display area
1018.08 mm (H) x 572.67 mm (V)
1209.6 mm (H) x 680.4 mm (V)
40.082 inches (H) x 22.546
inches (V)
47.622 inches (H) x 26.787
inches (V)
1054.5 x 608.5 x 35.1 mm
1249.5 x 721 x 35.1 mm
41.5 x 24.0 x 1.4 inches
49.2 x 28.4 x 1.4 inches
Weight
16.4 kg / 36.2 Ibs
20.5 kg / 45.2 Ibs
VESA
400 x 400 mm / 15.7 x 15.7 inches
Dimensions (W x H x D)
Model Name
Display Color
Synchronization
Resolution
DE40C / DE46C / DE55C
16.7M
Horizontal
30 ~ 81 kHz
Vertical
56 ~ 75 Hz
Optimum resolution
1920 x 1080 @ 60 Hz
Maximum resolution
1920 x 1080 @ 60 Hz
Maximum Pixel Clock
148.5 MHz (Analog, Digital)
Audio Output
10 W + 10 W
Power Supply
This product uses 100 to 240V. Refer to the label
at the back of the product as the standard
voltage can vary in different countries.
13 Specifications
228
13
Specifications
Model Name
Signal connectors
DE40C / DE46C / DE55C
Input
ANT IN(ATV/DTV), AV IN/COMPONENT
IN(common), RGB IN(PC D-Sub), DVI IN, HDMI
IN, DP IN, RGB/DVI/HDMI/AV/COMPONENT
AUDIO IN, RJ45, RS232C IN, IR/AMBINET
SENSOR IN
Output
IR OUT, AUDIO OUT, DP OUT(LOOP OUT),
RS232C OUT
USB
2 DOWN
Environmental
considerations
Operating
Temperature : 32˚F ~ 104˚F (0˚C ~ 40˚C)
Humidity : 10 % ~ 80 %, non-condensing
Storage
Temperature : -4˚F ~ 113˚F (-20˚C ~ 45˚C)
Humidity : 5 % ~ 95 %, non-condensing
Plug-and-Play : This monitor can be installed and used with any Plug-and-Play compatible systems.
Two-way data exchange between the monitor and PC system optimizes the monitor settings. Monitor
installation takes place automatically. However, you can customize the installation settings if desired.
Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may
appear brighter or darker on the panel. This does not affect product performance.
This device is a Class A digital apparatus.
(USA only)
Dispose unwanted electronics through an approved recycler.
To find the nearest recycling location, go to our website:
www.samsung.com/recyclingdirect or call, (877) 278 - 0799
13 Specifications
229
13
Specifications
13.2 PowerSaver
The power-saving function of this product reduces power consumption by switching off the screen and
changing the color of the power LED if the product is not used for a specified period of time. The power
is not turned off in power-saving mode. To switch the screen back on, press any key on the keyboard or
move the mouse. Power-savign mode only functions when the product is connected to a PC with a
power-saving function.
Normal Operation
State
Rating
(With PIM)
Power Indicator
Power
Consumption
Rating
Typical
Off
DE40C
220 W
150 W
71 W
DE46C
240 W
170 W
80 W
DE55C
260 W
190 W
88 W
Power saving
mode
Power off
(Power
Button)
Blinking
Off
Less than 1 W
Less than 1 W

The displayed power consumption level can vary in different operating conditions or when settings
are changed.

SOG (Sync On Green) is not supported.

To reduce the power consumption to 0, turn off disconnect the power cord. Disconnect the power
cable if you will not be using the product for an extended period of time (during vacation, etc.).
13 Specifications
230
13
Specifications
13.3 Standard Signal Mode Table

This product can be set to only one resolution for each screen size to obtain the optimum picture
quality due to the nature of the panel. Using a resolution other than the specified resolution may
degrade the picture quality. To avoid this, it is recommended that you select the optimum
resolution specified for your monitor.

Check the frequency when you exchange a CDT monitor (connected to a PC) for an LCD monitor.
If the LCD monitor does not support 85Hz, change the vertical frequency to 60Hz using the CDT
monitor before you exchange it with the LCD monitor.
The screen will automatically be adjusted if a signal that belongs to the following standard signal modes is
transmitted from your PC. If the signal transmitted from the PC does not belong to the standard signal
modes, the screen may be blank with the power LED on. In such a case, change the settings according
to the following table by referring to the graphics card user manual.
Display Mode
Horizontal
Frequency
(kHz)
Vertical
Frequency (Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
IBM, 720 x 400
31.469
70.087
28.322
-/+
MAC, 640 x 480
35.000
66.667
30.240
-/-
MAC, 832 x 624
49.726
74.551
57.284
-/-
MAC, 1152 x 870
68.681
75.062
100.000
-/-
VESA, 640 x 480
31.469
59.940
25.175
-/-
VESA, 640 x 480
37.861
72.809
31.500
-/-
VESA, 640 x 480
37.500
75.000
31.500
-/-
VESA, 800 x 600
35.156
56.250
36.000
+/+
VESA, 800 x 600
37.879
60.317
40.000
+/+
VESA, 800 x 600
48.077
72.188
50.000
+/+
VESA, 800 x 600
46.875
75.000
49.500
+/+
VESA, 1024 x 768
48.363
60.004
65.000
-/-
VESA, 1024 x 768
56.476
70.069
75.000
-/-
VESA, 1024 x 768
60.023
75.029
78.750
+/+
VESA, 1152 x 864
67.500
75.000
108.000
+/+
VESA, 1280 x 720
45.000
60.000
74.250
+/+
VESA, 1280 x 800
49.702
59.810
83.500
-/+
VESA, 1280 x 1024
63.981
60.020
108.000
+/+
VESA, 1280 x 1024
79.976
75.025
135.000
+/+
13 Specifications
231
13
Specifications
Display Mode
Horizontal
Frequency
(kHz)
Vertical
Frequency (Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
VESA, 1366 x 768
47.712
59.790
85.500
+/+
VESA, 1440 x 900
55.935
59.887
106.500
-/+
VESA, 1600 x 900(RB)
60.000
60.000
108.000
+/+
VESA, 1680 x 1050
65.290
59.954
146.250
-/+
VESA, 1920 x 1080
67.500
60.000
148.500
+/+
Horizontal Frequency
The time required to scan a single line from the left to the right side of the screen is called a horizontal
cycle. The reciprocal number of a horizontal cycle is called horizontal frequency. Horizontal frequency is
measured in kHz.
Vertical Frequency
The product displays a single image multiple times per second (like a fluorescent light) to display what
the viewer sees. The rate of a single image being displayed repeatedly per second is called vertical
frequency or refresh rate. Vertical frequency is measured in Hz.
13 Specifications
232
13
Specifications
13.4 License
Manufactured under license from Dolby Laboratories. Dolby and the double-D
symbol are trademarks of Dolby Laboratories.
Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674;
5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued &
pending. DTS and the Symbol are registered trademarks. & DTS 2.0+ Digital Out
and the DTS logos are trademarks of DTS, Inc. Product Includes software.
Inc. All Rights Reserved.
¯
DTS,
DivX Certified ´ to play DivX ´ video up to HD 1080p, including premium content.
DivX ´ , DivX Certified ´ and associated logos are trademarks of DivX, Inc. and are
used under license.
ABOUT DIVX VIDEO: DivX ´ is a digital video format created by DivX, Inc. This is an official DivX
Certified ´ device that plays DivX video. Visit www.divx.com for more information and software tools
to convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified ´ device must be registered in order to play
purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX
VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete
your registration.
Covered by one or more of the following U.S. patents : 7,295,673; 7,460,668; 7,515,710; 7,519,274
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI
Logo are trademarks or registered trademarks of
HDMI Licensing LLC in the United States and other countries.
Open source license notice
In the case of using open source software, Open Source license are available on the product menu.
Open Source License Notice is written only English.
13 Specifications
233
Appendix
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG
customer care center.
NORTH AMERICA
U.S.A
1-800-SAMSUNG (726-7864)
http://www.samsung.com
CANADA
1-800-SAMSUNG (726-7864)
http://www.samsung.com/ca
http://www.samsung.com/ca_fr
(French)
MEXICO
01-800-SAMSUNG (726-7864)
http://www.samsung.com
LATIN AMERICA
ARGENTINA
0800-333-3733
http://www.samsung.com
BRAZIL
0800-124-421
4004-0000
http://www.samsung.com
BOLIVIA
800-10-7260
http://www.samsung.com
CHILE
800-SAMSUNG (726-7864)
http://www.samsung.com
From mobile 02-482 82 00
COLOMBIA
01-8000112112
http://www.samsung.com
COSTA RICA
0-800-507-7267
http://www.samsung.com/latin
(Spanish)
http://www.samsung.com/
latin_en (English)
DOMINICA
1-800-751-2676
http://www.samsung.com/latin
(Spanish)
http://www.samsung.com/
latin_en (English)
ECUADOR
1-800-10-7267
http://www.samsung.com/latin
(Spanish)
http://www.samsung.com/
latin_en (English)
EL SALVADOR
800-6225
http://www.samsung.com/latin
(Spanish)
http://www.samsung.com/
latin_en (English)
Appendix
234
Appendix
LATIN AMERICA
GUATEMALA
1-800-299-0013
http://www.samsung.com/latin
(Spanish)
http://www.samsung.com/
latin_en (English)
HONDURAS
800-27919267
http://www.samsung.com/latin
(Spanish)
http://www.samsung.com/
latin_en (English)
JAMAICA
1-800-234-7267
http://www.samsung.com
NICARAGUA
00-1800-5077267
http://www.samsung.com/latin
(Spanish)
http://www.samsung.com/
latin_en (English)
PANAMA
800-7267
http://www.samsung.com/latin
(Spanish)
http://www.samsung.com/
latin_en (English)
PERU
0-800-777-08
http://www.samsung.com
PUERTO RICO
1-800-682-3180
http://www.samsung.com
TRINIDAD & TOBAGO
1-800-SAMSUNG (726-7864)
http://www.samsung.com
VENEZUELA
0-800-100-5303
http://www.samsung.com
Appendix
235
Appendix
Responsibility for the Pay Service (Cost to Customers)
When the service is requested, in spite of in warranty, we may charge you for a visit from a service
technician in the following cases.
Not a product defect
Cleaning of the product, Adjustment, Explanation, Re-installation and etc.

If a service technician gives instructions on how to use product or simply adjusts options without
disassembling product.

If a defect is caused by external environmental factors (Internet, Antenna, Wired Signal, etc.).

If a product is reinstalled or devices are connected additionally after installing the purchased product
for the first time.

If a product is reinstalled to move to a different spot or to move to a different house.

If customer requests instructions on how to use because of another company's product.

If customer requests instructions on how to use the network or another company's program.

If customer requests software installation and setup for the product.

If a service technician removes/cleans dusts or foreign materials inside of the product.

If customer requests an installation additionally after purchasing a product through home-shopping
or online.
A Product damage caused by customer's fault
Product damage caused by customer's mishandling or wrong repair.
If a product damage is caused by;

external impact or drop.

use of supplies or separatly sold product unspecified by Samsung.

repair from a person besides an engineer of outsourcing service company or partner of Samsung
Electronics Co., Ltd.

remodeling or repairing the product by customer.

using it with incorrect voltage or non-authorised electrical connections.

not following the "cautions" in User Manual.
Others

If product fails by natural disaster (lightning, fire, earthquake, flood damage, etc).

If consumable components are all used up (Battery, Toner, Fluorescent lights, Head, Vibrator, Lamp,
Filter, Ribbon, etc.).
If customer requests a service in case the product has no defect, service fee may be charged.
So please read User Manual first.
Appendix
236
Appendix
Optimum Picture Quality and Afterimage Burn-in Prevention
Optimum Picture Quality

To enjoy the optimum picture quality, go to Control Panel on your PC and adjust the resolution and
refresh rate as follows. The picture quality of TFT-LEDs may degrade if the optimum resolution is not
selected.


Resolution: 1920 X 1080

Vertical frequency (refresh rate): 56 ~ 75 Hz
Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may
be brighter or darker on the LED panel. This does not affect product performance.


The number of sub-pixels by LED panel type: DE40C, DE46C, DE55C: 6,220,800
Run "Auto Adjustment" to improve the picture quality. If noise is still found even after auto
adjustment, adjust Coarse or Fine.

Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage
burn-in or defective pixels.

Activate power-saving mode or a dynamic screen saver if you will not be using the product for
an extended period of time.

Unlike CDT monitors, TFT-LED monitors (due to the nature of the panel) can be set to only one
resolution to obtain the optimum picture quality. Therefore, setting a resolution other than the
specified resolution may degrade the picture quality. To avoid this, it is recommended that you select
the optimum resolution specified for your monitor.
Appendix
237
Appendix
Prevention of Afterimage Burn-in
What is afterimage burn-in?
Afterimage burn-in should not occur when the LCD panel is operating normally. Normal operation refers
to a continuously changing video pattern. If the LCD panel displays a fixed pattern for an extended period
of time (more than 12 hours), a slight voltage difference may occur between the electrodes in pixels that
control the liquid crystals.
Such a voltage difference between electrodes increases with time and makes the liquid crystals thinner.
When this occurs, a previous image can remain on the screen when the pattern changes. To prevent this,
the accumulated voltage difference should be reduced.
Black Matrix
Source
Color-Filter
Drain
Gate
{m{
Common
Electrode (ITO)
Pixel Electrode (ITO)
Storage
Capaccitor (Cs)
Data Bus-Line
Appendix
238
Appendix

Powering Off, Screen Saver and Power Saving Mode

Power off the product for 2 hours after using it for 12 hours.

Power off the product for 4 hours after using it for 20 hours.

Go to Display Properties > Power Supply on your PC and set the product to power off as required.

Using a screen saver is recommended.
It is best to use a single-color or moving-image screen saver.

Regular Color Change
Type 1
Type 2
FLIGHT
TIME
FLIGHT
TIME
OZ348
20:30
OZ348
20:30
UA102
21:10
UA102
21:10
Use 2 colors
Switch between 2 colors every 30 minutes as shown above.

Avoid combinations of a text color and background color of contrasting brightness.
Avoid using grey as it may contribute to afterimage burn-in.
Avoid using colors of contrasting brightness (black and white; grey).

FLIGHT : TIME
FLIGHT : TIME
OZ348 : 20:30
OZ348 : 20:30
Regular Text Color Change

Use bright colors of similar brightness.
Interval: Change text color and background color every 30 minutes
FLIGHT : TIME
OZ348

: 20:30
OZ348
: 20:30
FLIGHT : TIME
OZ348
: 20:30
FLIGHT : TIME
OZ348
: 20:30
Move and change text every 30 minutes as shown below.
FLIGHT
: TIME
FLIGHT
: TIME
OZ348
: 20:30
OZ348
: 20:30
[ Step 1 ]

FLIGHT : TIME
[ Step 2 ]
[ Step 3 ]
Regularly display a moving image along with a logo.
Interval: Display a moving image along with a logo for 60 seconds after using for 4 hours.

The best way to protect the product from afterimage burn-in is switching the power off or
setting the PC or system to run a screen saver when not in use. Also, Warranty service may be
limited depending on instruction guide.
Appendix
239
Appendix
Terminology
Dot Pitch
The product and screen consist of red, green and blue dots. A shorter distance between the dots
produces a higher resolution. Dot pitch refers to the distance between the shortest distance between
dots of the same color. Dot pitch is measured in millimeters.
Vertical Frequency
The product displays a single image many times per second (like a fluorescent light that flickers) to
display an image for a viewer to see. The rate of a single image being displayed repeatedly per second
is called vertical frequency or refresh rate. Vertical frequency is measured in Hz.
E.g. 60Hz refers to a single image being displayed 60 times in one second.
Horizontal Frequency
The time required to scan a single line from the left to the right side of the screen is called a horizontal
cycle. The reciprocal number of a horizontal cycle is called horizontal frequency. Horizontal frequency
is measured in kHz.
Non-interlace Mode and Interlace Mode
Non-interlace mode (progressive scan) displays a horizontal line from the top to the bottom of a
screen progressively. Interlace mode displays the odd number lines first and the even number lines
next. Non-interlace mode is mainly used in monitors as it produces screen clarity and interlace mode
is mainly used in TVs.
Plug & Play
Plug & Play is a function that allows the automatic exchange of information between a monitor and PC
to produce an optimum display environment. The product uses VESA DDC (international standard) to
execute Plug & Play.
Resolution
Resolution is the number of horizontal dots (pixels) and vertical dots (pixels) that form a screen. It
represents the level of display detail. A higher resolution enables more data to be displayed on the
screen and is useful to perform multiple tasks simultaneously.
E.g. A resolution of 1920 X 1080 consists of 1,920 horizontal pixels (horizontal resolution) and 1,080
vertical pixels (vertical resolution).
Appendix
240
Appendix
Multiple Display Control (MDC)
MDC (Multiple Display Control) is an application that allows multiple display devices to be controlled
simultaneously using a PC. Communication between a PC and monitor takes place using RS232C
(serial data transmission) and RJ45 (LAN) cables.
DVD (Digital Versatile Disc)
DVD refers to a CD-sized mass storage disk where you can save multimedia (audio, video or game)
applications using MPEG-2 video compression technology.
HDMI (High Definition Multimedia Interface)
It is an interface that can be connected to a digital audio source as well as a high-definition video
source by using a single cable without compression.
Component ports (green, blue and red)
The component ports, which identify, transmit and receive contrast signals, provide superior picture
quality to any other video connection methods.
Stereo
Stereo refers to a technology that outputs audio signals via two channels. It delivers 3D sound
experience through separate left and right audio channels over two speakers.
Source
Input source refers to a video source device connected to the product such as a camcorder or video
or DVD player.
480i / 480p / 720p / 1080i / 1080p
Each of the scanning rates above refers to the number of effective scanning lines that decides the
screen resolution. The scanning rate may be indicated in i (interlaced) or p (progressive), depending
on the scanning method.
- Scanning
Scanning refers to a process of sending pixels that form an image progressively. A larger number of
pixels will deliver a clearer and more vivid picture.
- Progressive
In progressive scan mode, all lines of pixels are scanned one by one (progressively) on the screen.
- Interlaced
In interlaced scan mode, every other line of pixels is scanned from top to bottom first and then the
remaining lines of pixels (that were not scanned) are scanned.
Appendix
241
Index
A
D
Advanced Settings 113
Device Name 138
AllShare Settings 137
Dimensions 38
Antenna 65
DivX® Video On Demand 165
Antenna (Air/Cable) 123
Anynet+(HDMI-CEC) 162
Auto Adjustment 112
Auto Program 124
Auto Protection Time 152
B
Batteries 33
Before Connecting 56
Before Installing the Product (Installation
Guide) 36
E
Eco Solution 145
Edit Name 172
Energy Saving 145
F
File Formats Compatible with MagicInfo Lite
Player 190
Fine Tune 125
Broadcast Audio Options 121
G
Game Mode 159
C
General 159, 228
Caption 146
Change PIN 151
Changing the Input source 70
Checking the Contents 23
Clear Scrambled Channel 124
I
Installing the Wall Mount 39
Items sold separately 26
Clock Mode 141
Configuring Settings for Multi Control 71
L
Connecting an External Monitor 62
License 233
Connecting and Using a PC 57
Local Schedule Manager 203
Connecting the network box (Sold
separately) 66
Connecting to a Video Device 63
M
Contact Samsung 167
MagicInfo Lite Player 195
Contact SAMSUNG WORLDWIDE 234
MagicInfo Lite Settings 135
Content Manager 216
MDC Program Installation/Uninstallation 72
Contents Home 169
Menu Language 144
Crosstalk Noise Reduction 125
Multi Control 140
Custom settings screen 108
Music 184
My List 181
Index
242
Index
N
Screen Position 157
Network Setting 126
Security 148
Network Status 134
Settings 218
No Signal Power Off 145
Setup 139
Sleep Timer 142
P
Parts 28
PC connection 57
PC Module Power 166
Photos 183
Picture Mode 107
Picture Options 116
Picture Size 109
Soft AP 136
Software Update 167
Sound Effect 120
Sound Mode 119
Source AutoSwitch Settings 158
Speaker Settings 121
Standard 108
Standard Signal Mode Table 231
PIP 151
Port 30
T
PowerSaver 230
Ticker 155
Problem report 222
Time 141
Q
U
Q & A 226
Using the Basic AllShare Play Features 178
R
V
Remote Control 32, 41
Video Wall 156
Reset All 166
Videos 182
Reset Picture 118
Videos / Photos / Music Play Option menu 185
Reset Sound 122
Reset System 165
Resolution configuration 60
Responsibility for the Pay Service (Cost to
Customers) 236
Rotate Menu 144
W
What is AllShare Play? 173
What is MDC? 73
When Content is Running 220
Wi-Fi Direct 136
Wired Network 126
S
WPS(PBC) 133
Screen Adjustment 109
Screen Burn Protection 153
Index
243

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Key Features

  • Digital signage flat panel Black
  • 116.8 cm (46") 1920 x 1080 pixels 700 cd/m²
  • 8 ms
  • Ethernet LAN
  • Built-in speaker(s) 20 W

Related manuals

Download PDF

advertisement