Samsung S24B750V User manual User manual
Below you will find brief information for SAMSUNG Monitor S24B750V, S24B750H, S27B750V, and S27B750H. This user manual provides detailed instructions on setting up and using your new monitor. It covers everything from connecting to your PC and adjusting screen settings like brightness, contrast, and color, to utilizing features such as SAMSUNG MAGIC Bright, MAGIC Angle, and MHL connectivity (on select models). You'll also find troubleshooting tips and safety guidelines to ensure optimal performance and longevity.
Advertisement
Advertisement
User manual
SyncMaster
S24B750V
S24B750H
S27B750V
S27B750H
The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance.
BN46-00203A-
1 1
Table Of Contents
BEFORE USING THE
PRODUCT
10
10
11
13
17
8
8
9
9
7
7
7
Copyright
Icons used in this manual
Symbols for safety precautions
Cleaning
Cleaning
Securing the Installation Space
Precautions for storage
Safety Precautions
Electricity and Safety
Installation and Safety
Operation and Safety
Correct posture to use the product
PREPARATIONS
18 Checking the Contents
18
19
Removing the Packaging
Checking the Components
20
20
23
24
24
Parts
Frontal Buttons
Reverse Side
Adjusting the Product Tilt
Anti-theft Lock
USING "MHL(MOBILE
HIGH-DEFINITION LINK)"
25
26
28
CONNECTING AND USING
A SOURCE DEVICE
29
29
29
"MHL" (Mobile High-Definition Link)
Using "MHL"
Disabling "MHL"
Before Connecting
Pre-connection Checkpoints
Connecting the Power
Table Of Contents
2
Table Of Contents
30
30
32
34
35
36
Connecting and Using a PC
Connecting to a PC
Connecting to Headphones or Speakers
(S24B750V / S27B750V)
Driver Installation
Setting Optimum Resolution
Changing the Resolution Using a PC
SCREEN SETUP
39 Brightness
39 Configuring Brightness
46
46
47
47
44
44
45
45
42
42
43
43
40
40
41
41
Contrast
Configuring Contrast
Sharpness
Configuring Sharpness
SAMSUNG MAGIC Bright
Configuring SAMSUNG MAGIC Bright
SAMSUNG MAGIC Angle
Configuring SAMSUNG MAGIC Angle
Coarse
Adjusting Coarse
Fine
Adjusting Fine
Response Time
Configuring Response Time
HDMI Black Level
Configuring the HDMI Black Level Settings
CONFIGURING TINT
48 SAMSUNG MAGIC Color
48 Configuring SAMSUNG MAGIC Color
49
49
Red
Configuring Red
Table Of Contents
3
Table Of Contents
52
52
53
53
50
50
51
51
Green
Configuring Green
Blue
Configuring Blue
Color Tone
Configuring the Color Tone Settings
Gamma
Configuring Gamma
RESIZING OR
RELOCATING THE
SCREEN
54
54
55
55
56
56
H-Position & V-Position
Configuring H-Position & V-Position
Image Size
Changing the Image Size
Menu H-Position & Menu V-Position
Configuring Menu H-Position & Menu V-
Position
SETUP AND RESET
57 Reset
57 Initializing Settings ( Reset )
60
60
61
61
58
58
59
59
62
62
63
63
Language
Changing the Language
Eco Saving
Configuring Eco Saving
Off Timer On/Off
Configuring Off Timer On/Off
Off Timer Setting
Configuring Off Timer Setting
PC/AV Mode
Configuring PC/AV Mode
Key Repeat Time
Configuring Key Repeat Time
Table Of Contents
4
Table Of Contents
66
66
67
67
64
64
65
65
Customized Key (S24B750H / S27B750H)
Configuring Customized Key
Auto Source
Configuring Auto Source
Display Time
Configuring Display Time
Menu Transparency
Changing Menu Transparency
INFORMATION MENU AND
OTHERS
68
68
69
69
70
71
INFORMATION
Displaying INFORMATION
Configuring Volume in the Initial Screen
(S24B750V / S27B750V)
Volume
Sound Mode
Configuring Brightness and Contrast in the Initial Screen
(S24B750H / S27B750H)
INSTALLING THE
SOFTWARE
72
72
72
73
Magic Tune
What is MagicTune?
Installing the Software
Removing the Software
TROUBLESHOOTING
GUIDE
74
74
74
74
77
Requirements Before Contacting
Samsung Customer Service Center
Testing the Product
Checking the Resolution and Frequency
Check the following.
Q & A
SPECIFICATIONS
79 General
81 PowerSaver
Table Of Contents
5
Table Of Contents
82 Standard Signal Mode Table
APPENDIX
84 Contact SAMSUNG WORLD WIDE
90
90
Correct Disposal
Correct Disposal of This Product (Waste
Electrical & Electronic Equipment)
91 Terminology
INDEX
Table Of Contents
6
Before Using the Product
Copyright
The contents of this manual are subject to change without notice to improve quality.
© 2012 Samsung Electronics
Samsung Electronics owns the copyright for this manual.
Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited.
The SAMSUNG and SyncMaster logos are registered trademarks of Samsung Electronics.
Microsoft and Windows are registered trademarks of Microsoft Corporation.
VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association.
z z
An administration fee may be charged if either
(a) an engineer is called out at your request and there is no defect in the product
(i.e. where you have failed to read this user manual).
(b) you bring the unit to a repair centre and there is no defect in the product
(i.e. where you have failed to read this user manual).
The amount of such administration charge will be advised to you before any work or home visit is carried out.
Icons used in this manual
The following images are for reference only. Real-life situations may differ from what is shown in the images.
Symbols for safety precautions
Warning
Caution
A serious or fatal injury may result if instructions are not followed.
Personal injury or damage to properties may result if instructions are not followed.
Activities marked by this symbol are prohibited.
Instructions marked by this symbol must be followed.
Before Using the Product
7
Before Using the Product
Cleaning
Cleaning
Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched.
Take the following steps when cleaning.
1. Power off the monitor and computer.
2. Disconnect the power cord from the monitor.
Hold the power cable by the plug and do not touch the cable with wet hands. Otherwise, an electric shock may result.
3. Wipe the monitor screen using a clean, soft and dry cloth.
z
Do not apply a cleaning agent that contains alcohol, solvent, or surfactant to the monitor.
!
z
Do not spray water or detergent directly on the product.
4. Wet a soft and dry cloth in water and wring thoroughly to clean the exterior of the monitor.
5. Connect the power cord to the product after cleaning the product.
6. Power on the monitor and computer.
!
Before Using the Product
8
Before Using the Product
Securing the Installation Space
z
Ensure some space around the product for ventilation. An internal temperature rise may cause fire and damage the product. Be sure to allow the amount of space as shown below or greater when installing the product.
The exterior may differ depending on the product.
10 cm
10 cm
10 cm 10 cm
10 cm
Precautions for storage
High-glossy models can develop white stains on the surface if an ultrasonic wave humidifier is used nearby.
Be sure to contact Samsung Customer Service Center (page 84) if the inside of the monitor needs
cleaning. (Service fee will be charged.)
Before Using the Product
9
Before Using the Product
Safety Precautions
Electricity and Safety
The following images are for reference only. Real-life situations may differ from what is shown in the images.
Warning
Do not use a damaged power cord or plug, or a loose power socket.
z
An electric shock or fire may result.
Do not plug many products into the same power socket.
z
Otherwise, the socket may overheat and cause a fire.
!
!
Do not touch the power plug with wet hands.
z
Otherwise, an electric shock may result.
Insert the power plug all the way in so it is not loose.
z
An unstable connection may cause a fire.
Ensure you connect the power plug to a grounded power socket. (type 1 insulated devices only). z
An electric shock or injury may result.
Do not bend or pull the power cord with force. Do not weigh the power cord down with a heavy object.
z
A damaged power cord may cause an electric shock or fire.
Do not place the power cord or product near heat sources. z
An electric shock or fire may result.
Remove foreign substances such as dust around the plug pins and power socket with a dry cloth. z
Otherwise, a fire may result.
!
Before Using the Product
10
Before Using the Product
Caution
Do not unplug the power cord when the product is in use.
z
The product may become damaged by an electric shock.
!
!
Do not use the power cord for products other than authorized products supplied by Samsung. z
An electric shock or fire may result.
Keep the power socket where the power cord is connected unobstructed. z
If any problem occurs in the product, unplug the power cable to completely cut the power to the product.
Power to the product cannot be completely cut off with the power button.
Hold the plug when disconnecting the power cord from the power socket. z
An electric shock or fire may result.
!
Installation and Safety
Warning
DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP
OF THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES.
z
Otherwise, a fire may result.
Avoid installing the product in a narrow space with bad ventilation, such as a bookshelf or wall closet.
z
Otherwise, a fire may result due to an increased internal temperature.
Keep the plastic packaging bag for the product in a place that cannot be reached by children.
z
Children may suffocate.
!
Before Using the Product
11
Before Using the Product
!
Do not install the product on an unstable or vibrating surface (insecure shelf, sloped surface, etc.). z z
The product may fall and break or cause a personal injury.
Using the product in an area with excess vibration may damage the product or cause a fire.
Do not install the product in a vehicle or a place exposed to dust, moisture (water drips, etc.), oil, or smoke. z
An electric shock or fire may result.
Do not expose the product to direct sunlight, heat, or a hot object such as a stove.
z
Otherwise, the product lifespan may be reduced, or a fire may result.
Do not install the product within the reach of young children.
z
The product may fall and injure children.
Edible oil, such as soybean oil, can damage or deform the product. Do not install the product in a kitchen or near a kitchen counter.
!
Caution
Take care not to drop the product when moving it. z
Otherwise, product failure or personal injury may result.
Do not set down the product on its front.
z
The screen may become damaged.
When installing the product on a cabinet or shelf, make sure that the bottom edge of the front of the product is not protruding.
z z
The product may fall and break or cause a personal injury.
Install the product only on cabinets or shelves of the right size.
Before Using the Product
12
Before Using the Product
Put down the product carefully.
z
The product may fall and break or cause a personal injury.
!
!
SAMSUNG
Installing the product in an unusual place (a place exposed to a lot of fine particles, chemical substances or extreme temperatures, or an airport or train station where the product should operate continuously for an extended period of time) may seriously affect its performance.
z
Be sure to consult Samsung Customer Service Center (page 84) before
installation if you want to install the product at such a place.
Operation and Safety
Warning
!
!
High voltage runs through the product. Do not attempt to disassemble, repair, or modify the product on your own.
z z
An electric shock or fire may result.
Contact Samsung Customer Service Center (page 84) for repair.
Before moving the product, turn off the power switch and disconnect the power cable and all other connected cables. z
Otherwise, the power cord may be damaged and a fire or electric shock may result.
If the product generates a strange noise, a burning smell, or smoke, remove the
power cord immediately and contact Samsung Customer Service Center (page
z
An electric shock or fire may result.
Do not let children hang from the product or climb on top of it.
z
The product may fall, and your child may become injured or seriously harmed.
If the product falls or the exterior is damaged, power off the product, remove the
power cord, and contact Samsung Customer Service Center (page 84).
z
Otherwise, an electric shock or fire may result.
Do not put a heavy object, toy, or sweets on top of the product.
z
The product or heavy objects may fall as children try to reach for the toy or sweets resulting in a serious injury.
Before Using the Product
13
Before Using the Product
!
!
!
!
During a lightning or thunderstorm, power off the product and remove the power cable.
z
An electric shock or fire may result.
Do not drop objects on the product or apply impact.
z
An electric shock or fire may result.
GAS
Do not move the product by pulling the power cord or any cable.
z
Otherwise, the cable may be damaged and product failure, an electric shock or fire may result.
If a gas leakage is found, do not touch the product or power plug. Also, ventilate the area immediately.
z
Sparks can cause an explosion or fire.
Do not lift or move the product by pulling the power cord or any cable.
z
Otherwise, the cable may be damaged and product failure, an electric shock or fire may result.
Do not use or keep combustible spray or an inflammable substance near the product.
z
An explosion or fire may result.
Ensure the vents are not blocked by tablecloths or curtains.
z
Otherwise, a fire may result from an increased internal temperature.
100
Do not insert a metallic object (a chopstick, coin, hair pin, etc.) or inflammable object (paper, match, etc.) into the vent or ports of the product.
z z
If water or any foreign substance enters the product, be sure to power off the product, remove the power cord, and contact Samsung Customer Service
Product failure, an electric shock or fire may result.
Do not place objects containing liquid (vases, pots, bottles, etc) or metallic objects on top of the product.
z z
If water or any foreign substance enters the product, be sure to power off the product, remove the power cord, and contact Samsung Customer Service
Product failure, an electric shock or fire may result.
Before Using the Product
14
Before Using the Product
!
!
!
!!
!
-_-
Caution
Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels.
z
If you are not going to use the product for an extended period of time, activate power-saving mode or a moving-picture screen saver.
Disconnect the power cord from the power socket if you do not plan on using the product for an extended period of time (vacation, etc.).
z
Otherwise, a fire may result from accumulated dust, overheating, an electric shock, or electric leakage.
Use the product at the recommended resolution and frequency.
z
Your eyesight may deteriorate.
Do not put DC power adapters together.
z
Otherwise, a fire may result.
Remove the plastic bag from the DC power adapter before you use it.
z
Otherwise, a fire may result.
Do not let water enter the DC power adapter or get the adapter wet.
z z z
An electric shock or fire may result.
Avoid using the product outdoors where it can be exposed to rain or snow.
Be careful not to get the DC power adapter wet when you wash the floor.
Do not put the DC power adapter near to any heating apparatus.
z
Otherwise, a fire may result.
Keep the DC power adapter in a well-ventilated area.
Looking at the screen too close for an extended period of time can deteriorate your eyesight.
Before Using the Product
15
Before Using the Product
!
!
!
Do not hold the monitor upside-down or move it by holding the stand.
z
The product may fall and break or cause a personal injury.
Do not use humidifiers or stoves around the product.
z
An electric shock or fire may result.
Rest your eyes for more than 5 minutes for every 1 hour of product use.
z
Eye fatigue will be relieved.
Do not touch the screen when the product has been turned on for an extended period of time as it will become hot.
Store the small accessories used with the product out of reach of children.
Exercise caution when adjusting the product angle or stand height.
z z
Otherwise, children's fingers or hands may become stuck and injured.
Tilting the product excessively may cause it to fall and result in personal injury.
Do not place heavy objects on the product.
z
Product failure or personal injure may result.
When using headphones or earphones, do not turn the volume too high.
z
Having the sound too loud may damage your hearing.
Before Using the Product
16
Before Using the Product
Caution
z
Exercise caution when adjusting the angle of the product.
Your fingers may get caught and injured when folding the product. Ensure you take extra caution.
Correct posture to use the product
Use the product in the correct posture as follows.
z z z z z z
Straighten your back.
Allow a distance of 45 to 50cm between your eye and the screen, and look slightly downward at the screen.
Keep your eyes directly in front of the screen.
Adjust the angle so light does not reflect on the screen.
Keep your forearms perpendicular to your upper arms and level with the back of your hands.
Keep your elbows at about a right angle.
Adjust the height of the product so you can keep your knees bent at 90 degrees or more, your heels attached to the floor, and your arms lower than your heart.
Before Using the Product
17
1
Preparations
1.1
Checking the Contents
1.1.1
Removing the Packaging
1
Open the packaging box. Be careful not to damage the product when you open the packaging with a sharp instrument.
2
Remove the styrofoam from the product.
3
Check the components and remove the styrofoam and plastic bag.
This image is for reference only.
4
Store the box in a dry area so that it can be used when moving the product in the future.
1 Preparations
18
1
Preparations
1.1.2
Checking the Components
z z
Contact the dealer from whom you purchased the product if any item is missing.
The appearance of the components and items sold separately may differ from the image shown.
Components
Quick setup guide Warranty card
(Not available in some locations)
User manual
Power cable DC power adapter D-SUB cable (optional)
Cleaning cloth HDMI cable (optional) MHL Cable
(S24B750V / S27B750V)
Stereo Cable
(S24B750V / S27B750V)
Cable Holder
Components may vary depending on the country.
Items sold separately
The following items can be purchased at your nearest retailer.
HDMI-DVI cable
1 Preparations
19
1
Preparations
1.2
Parts
1.2.1
Frontal Buttons
The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
S24B750V / S27B750V
Key guide
MHL VOL AUTO
MHL VOL
S24B750H / S27B750H
SAMSUNG
MAGIC
BRIGHT
Key guide
AUTO
S24B750V / S27B750V
S24B750H / S27B750H
This is a touch-type button. Tap the button lightly with a finger.
1 Preparations
20
1
Preparations
Icons
MENU
MHL
(S24B750V / S27B750V)
(S24B750H / S27B750H) z z
Description
Open or close the onscreen display (OSD) menu, or return to the parent menu.
OSD control lock: Maintain the current settings, or lock the OSD control to prevent unintended changes to settings.
Enable: To lock the OSD control, press the [
MENU
] button for 10 seconds.
Disable: To unlock the locked OSD control, press the [
MENU
] button for more than 10 seconds.
If the OSD control is locked, z
,
INFORMATION can be viewed.
can be adjusted, and z
[
The
function can be used by pressing the
](S24B750H / S27B750H) button. (The Customized Key
function specified before the OSD control was locked is available even when the OSD control is locked.)
Pressing the [ MHL ] (S24B750V / S27B750V) button when your smartphone is connected to [HDMI IN 2 / MHL] on the product enables the MHL function, which allows you to import data from the smartphone to the product.
For further details on the MHL
function, refer to " Using "MHL(Mobile
] button activates the function When the Key guide is displayed, the [ assigned to Customized Key .
Configure Customized Key and press [ be enabled.
]. The following options will
-
-
To configure Customized Key , go to SETUP&RESET →
Customized Key and select the mode you want.
Move to the upper or lower menu or adjust the value for an option on the
OSD menu.
(S24B750V / S27B750V)
(S24B750H / S27B750H)
When the Key guide is displayed, the [ ] button activates the function assigned to
.
When the Key guide is displayed, the [ ] button activates the function assigned to
1 Preparations
21
1
Preparations
Icons
AUTO
(Power lamp)
Key guide
Description
Confirm a menu selection.
Pressing the [ ] button when the OSD menu is not displayed will change the input source ( Analog / HDMI IN 1(DVI) / HDMI IN 2/MHL )
(S24B750V / S27B750V) ( Analog / HDMI IN ) (S24B750H / S27B750H). If you power on the product or change the input source by pressing the
[ ] button, a message that shows the changed input source will appear at the top left corner of the screen.
Press the [
AUTO
] button to automatically adjust the screen settings.
Changing the resolution in Display Properties will activate the Auto
Adjustment function.
Turn the screen on or off.
The power indicator will be lit when the product is operating normally.
To reduce power consumption, it is best to remove the power cable when you will not be using the product for an extended period of time.
When a control button on the product is pressed, the Key guide will be displayed before the onscreen menu opens. (The guide shows the function of the button pressed.)
To access the onscreen menu when the guide is displayed, press the corresponding button again.
The Key guide may vary depending on the function or product model.
Refer to the actual product.
1 Preparations
22
1
Preparations
1.2.2
Reverse Side
The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
S24B750V / S27B750V S24B750H / S27B750H
(DVI)
HDMI IN 2 / MHL
DC 14V
HDMI IN 1(DVI) RGB IN
DC 14V
HDMI IN
RGB IN
Port
HDMI IN 1(DVI)
HDMI IN 2 / MHL
(S24B750V / S27B750V)
Ports
Connect to the DC power adapter.
Connect to a source device using an HDMI cable.
Connect to a source device that has the MHL function using the
MHL cable.
Connect to a source device using an HDMI cable.
Connect to a PC using the D-SUB cable.
(S24B750V / S27B750V)
Connect to an audio-input source using an stereo cable.
Connect to an audio output device such as headphones.
(S24B750V / S27B750V)
1 Preparations
23
1
Preparations
1.2.3
Adjusting the Product Tilt
The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
-1° (±1°) ~ 21° (±1°) z z
You can adjust the tilt of your monitor.
Hold the lower part of the product and adjust the tilt carefully.
1.2.4
Anti-theft Lock
An anti-theft lock allows you to use the product securely even in public places. The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details. The lock device is sold separately.
The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
To lock an anti-theft locking device:
1
Fix the cable of your anti-theft locking device to a heavy object such as a desk.
2
Put one end of the cable through the loop on the other end.
3
Insert the locking device into the anti-theft lock slot at the back of the product.
4
Lock the locking device.
z z z
An anti-theft locking device can be purchased separately.
Refer to the user guide provided with your anti-theft locking device for details.
Anti-theft locking devices can be purchased at electronics retailers or online.
1 Preparations
24
2
Using "MHL(Mobile High-Definition Link)"
The "MHL" function is available on the S24B750V / S27B750V model only.
2.1
"MHL" (Mobile High-Definition Link)
This feature allows you to enjoy videos and photos (imported from a connected mobile device that supports MHL ) on the screen of the product.
S24B750V / S27B750V
MHL z z z z z z
To use the MHL function, you need an MHL -certified mobile device. You can check if your mobile device is MHL certified on the device manufacturer's website. To find a list of MHL -certified devices, visit the official MHL website (http://www.mhlconsortium.org).
To use the MHL function, the latest version of software must be installed on the mobile device.
On some mobile devices, the MHL function may not be available depending on the device's performance or functionality.
Since the display size of the product is larger than those of mobile devices, the picture quality may degrade.
This product is officially MHL -certified. If you encounter any problem when using the MHL function, please contact the manufacturer of the mobile device.
The picture quality may degrade when content (imported from the mobile device) with a low resolution is played on the product.
2 Using "MHL(Mobile High-Definition Link)"
25
2
Using "MHL(Mobile High-Definition Link)"
2.1.1
Using "MHL"
1
Connect the USB port on the mobile device to the [HDMI IN 2 / MHL] port on the product using the
MHL cable.
HDMI IN 2 z
When the MHL cable is used, [HDMI IN 2 / MHL] is the only port on the product that supports the MHL function.
z
A mobile device should be purchased separately.
2
Connect the DC power adapter to the product and a power outlet.
(For details, refer to "3.2 Connecting the Power".)
3
Press the [ MHL ] button to activate MHL mode.
S24B750V / S27B750V
4
If the following message appears, MHL mode is activated. After about 3 seconds, the MHL screen will be displayed.
[MHL]
MHL
MHL activated.
3 sec later
MHL DSUB/HDMI1
The indicated time "3 sec later" may vary depending on the mobile device.
2 Using "MHL(Mobile High-Definition Link)"
26
2
Using "MHL(Mobile High-Definition Link)"
When the mobile device is in power-saving mode
When the mobile device is in power-saving mode, the following message will appear in place of the
MHL screen. To display the MHL screen, deactivate power-saving mode.
MHL device is in sleep mode.
When the mobile device is not connected or does not support MHL
z z z z
When the mobile device is not connected to the product or does not support the MHL function, the following message will appear.
If MHL mode is not activated, check the connection of the mobile device.
If MHL mode is not activated, check if the mobile device supports MHL .
If MHL mode is not activated even though the mobile device supports MHL , update the firmware of the mobile device to the latest version.
MHL
MHL device is not connected or the device doesn't support MHL.
3 sec later
MHL
Check Signal Cable
HDMI2/MHL
The indicated time "3 sec later" may vary depending on the mobile device.
2 Using "MHL(Mobile High-Definition Link)"
27
2
Using "MHL(Mobile High-Definition Link)"
2.1.2
Disabling "MHL"
Disabling MHL by using the [MHL] button
When MHL is active, press the [ MHL ] button. The MHL function will be disabled.
DSUB
(or HDMI1)
[MHL]
MHL DSUB/HDMI1
The input source changes automatically only when a cable is connected to a port other than [HDMI IN 2
/ MHL].
MHL MHL
Check Signal Cable
HDMI2/MHL
When the cable is disconnected or the mobile device is powered off
If the MHL cable is disconnected or the mobile device is powered off when MHL is active, the MHL function will be disabled.
%JTDPOOFDUEFWJDF
PS
1PXFSPGG
MHL
MHL device disconnected.
3 sec later
MHL
Check Signal Cable
HDMI2/MHL z z
If the MHL cable is disconnected, the product will display the message Check Signal Cable and remain in MHL mode.
The indicated time "3 sec later" may vary depending on the mobile device.
2 Using "MHL(Mobile High-Definition Link)"
28
3
Connecting and Using a Source Device
3.1
Before Connecting
S24B750V / S27B750V S24B750H / S27B750H
HDMI IN 1 (DVI)
3.1.1
Pre-connection Checkpoints
z z z
Before connecting a source device, read the user manual provided with it.
The number and locations of ports on source devices may differ from device to device.
Do not connect the power cable until all connections are completed.
Connecting the power cable during connection may damage the product.
Check the types of ports at the back of the product you want to connect.
3.2
Connecting the Power
z
Connect the power adapter to [DC 14V] on the rear of the product. Connect the power cord to the adapter and wall socket. (The input voltage is switched automatically.)
DC 14V
3 Connecting and Using a Source Device
29
3
Connecting and Using a Source Device
3.3
Connecting and Using a PC
3.3.1
Connecting to a PC
z z
Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.
Select a connection method suitable for your PC.
Connecting parts may differ in different products.
Connection Using the D-SUB Cable (Analogue Type)
RGB IN
1
Connect the D-SUB cable to the [RGB IN] port on the back of the product and the RGB port on the PC.
2
Connect the DC power adapter to the product and a power socket. Next, turn on the power switch on the PC.
(For details, refer to "3.2 Connecting the Power".)
3
Press [ ] to change the input source to Analog .
z
The S24B750H / S27B750H model does not support sound.
To enable the sound on an S24B750V / S27B750V model, connect an stereo cable.
z
Connection Using an HDMI Cable
HDMI IN
1
Connect the HDMI cable to the HDMI port on the back of the product and the HDMI port on the PC.
2
Connect the DC power adapter to the product and a power socket. Next, turn on the power switch on the PC.
(For details, refer to "3.2 Connecting the Power".)
3
Press the [ ] button to change the input source to HDMI IN 1(DVI) / HDMI IN 2/
MHL (S24B750V / S27B750V) / HDMI IN (S24B750H / S27B750H).
3 Connecting and Using a Source Device
30
3
Connecting and Using a Source Device
The S24B750H / S27B750H model does not support sound.
Connection Using an HDMI-DVI Cable
HDMI IN
1
Connect the HDMI-DVI cable to the HDMI port on the back of the product and the DVI port on the
PC.
2
Connect the DC power adapter to the product and a power socket. Next, turn on the power switch on the PC.
(For details, refer to "3.2 Connecting the Power".)
3
Press the [ ] button to change the input source to HDMI IN 1(DVI) / HDMI IN 2/
MHL (S24B750V / S27B750V) / HDMI IN (S24B750H / S27B750H).
S24B750V/S27B750V
PC/AV Mode
+'0,
+'0,0+/
3&
$9
'9,3&
ೳ z z
EXIT
ࢇࢷ֩Ѝ ࢇѰ
AUTO
۴
The S24B750H / S27B750H model does not support sound.
To enable the sound on an S24B750V / S27B750V model, connect the stereo cable and select
DVI PC
.
3 Connecting and Using a Source Device
31
3
Connecting and Using a Source Device
3.3.2
Connecting to Headphones or Speakers (S24B750V / S27B750V)
AUDIO IN
AUDIO OUT
1
Connect an audio output device such as headphones or speakers to [ ] on the product.
To enable the audio, connect the stereo cable.
3 Connecting and Using a Source Device
32
3
Connecting and Using a Source Device
Changing the sound settings on Windows
z z
Check that the HDMI or stereo cable is properly connected.
Adjust the sound output port settings according to the conditions where the product is used.
Control Panel
→
Audio
→
Speaker
→
Speaker Setup
1 2
3 4 z
Click the volume icon [
A
] on the Windows taskbar to adjust the volume [
B
].
B
A
3 Connecting and Using a Source Device
33
3
Connecting and Using a Source Device
3.3.3
Driver Installation
z
You can set the optimum resolution and frequency for this product by installing the corresponding drivers.
z
An installation driver is contained on the CD supplied with the product.
z
If the file provided is faulty, visit the Samsung homepage (http://www.samsung.com) and download the file.
1
Insert the user manual CD provided with the product into the CD-ROM drive.
2
Click "Windows Driver".
3
Follow the instructions given on the screen to proceed with installation.
4
Select your product model from the list of models.
5
Go to Display Properties and check that the resolution and refresh rate are appropriate.
Refer to your Windows OS manual for further details.
3 Connecting and Using a Source Device
34
3
Connecting and Using a Source Device
3.3.4
Setting Optimum Resolution
An information message about setting optimum resolution will appear if you power on the product for the first time after purchase.
Select a language on the product and change the resolution on your PC to the optimum setting.
The optimal resolution for this monitor is as follows:
1920 x 1080 60Hz
Use the above settings to set the resolution on your PC.
English
EXIT
֩ЍیԂक ࣏ࢽ
AUTO
۴
1
Press [ ] to move to the language you want and press [
2
To hide the information message, press [
MENU
].
z z
].
If the optimum resolution is not selected, the message will appear up to three times for a specified time even when the product is turned off and on again.
The optimum resolution can also be selected in Control Panel on your PC.
3 Connecting and Using a Source Device
35
3
Connecting and Using a Source Device
3.3.5
Changing the Resolution Using a PC
z
Adjust the resolution and refresh rate in Control Panel on your PC to obtain optimum picture quality.
z
The picture quality of TFT-LCDs may degrade if the optimum resolution is not selected.
Changing the Resolution on Windows XP
Go to Control Panel Display Settings and change the resolution.
1 2
3
**********
**** ****
3 Connecting and Using a Source Device
36
3
Connecting and Using a Source Device
Changing the Resolution on Windows Vista
Go to Control Panel Personalization Display Settings and change the resolution.
1 2
3 4
3 Connecting and Using a Source Device
37
3
Connecting and Using a Source Device
Changing the Resolution on Windows 7
Go to Control Panel Display Screen Resolution and change the resolution.
1 2
3 4
3 Connecting and Using a Source Device
38
4
Screen Setup
Configure the screen settings such as brightness and color tone.
4.1
Brightness
You can adjust the general brightness of the picture. (Range: 0~100)
A higher value will make the picture appear brighter.
z z
This menu is not available when
Dynamic Contrast mode.
is set to On .
4.1.1
Configuring Brightness
1
Press any button on the front of the product to display the Key guide. Next, press [
MENU
] to display the corresponding menu screen.
2
Press [
3
Press [ appear.
] to move to Picture and press [
] to move to Brightness and press [
] on the product.
] on the product. The following screen will
PICTURE
Brightness
Contrast
Sharpness
SAMSUNG
M A G I C Bright
SAMSUNG
M A G I C Angle
Coarse
Fine
EXIT
4
Adjust the Brightness using the [ ] buttons.
Custom
Off
AUTO AUTO
۴
4 Screen Setup
39
4
Screen Setup
4.2
Contrast
Adjust the contrast between the objects and background. (Range: 0~100)
A higher value will increase the contrast to make the object appear clearer.
z z
This menu is not available when
This menu is not available when
Cinema or Dynamic Contrast mode.
is in Full or Intelligent mode.
4.2.1
Configuring Contrast
1
Press any button on the front of the product to display the Key guide. Next, press [
MENU
] to display the corresponding menu screen.
2
Press [
3
Press [ appear.
] to move to Picture and press [
] to move to Contrast and press [
] on the product.
] on the product. The following screen will
PICTURE
4
Adjust the Contrast using the [
Brightness
Contrast
Sharpness
SAMSUNG
M A G I C Bright
SAMSUNG
M A G I C Angle
Coarse
Fine
EXIT
] buttons.
&XVWRP
2II
AUTO AUTO
4 Screen Setup
40
4
Screen Setup
4.3
Sharpness
Make the outline of objects more clear or blurry. (Range: 0~100)
A higher value will make the outline of objects clearer.
z z
This menu is not available when
This menu is not available when
Cinema or Dynamic Contrast mode.
is in Full or Intelligent mode.
4.3.1
Configuring Sharpness
1
Press any button on the front of the product to display the Key guide. Next, press [
MENU
] to display the corresponding menu screen.
2
Press [
3
Press [ appear.
] to move to Picture and press [
] to move to Sharpness and press [
] on the product.
] on the product. The following screen will
PICTURE
Brightness
Contrast
Sharpness
SAMSUNG
M A G I C Bright
SAMSUNG
M A G I C Angle
Coarse
Fine
EXIT
4
Adjust the Sharpness using the [ ] buttons.
Custom
Off
4 Screen Setup
41
4
Screen Setup
4.4
SAMSUNG MAGIC Bright
This menu provides an optimum picture quality suitable for the environment where the product will be used.
z
is set to On .
This menu is not available when
is enabled.
z
You can customize the brightness to suit your preferences.
4.4.1
Configuring SAMSUNG MAGIC Bright
1
Press any button on the front of the product to display the Key guide. Next, press [
MENU
] to display the corresponding menu screen.
2
Press [
3
Press [ appear.
] to move to Picture and press [
] to move to Bright and press [
] on the product.
] on the product. The following screen will
PICTURE
Brightness
Contrast
Sharpness
SAMSUNG
M A G I C Bright
SAMSUNG
M A G I C Angle
Coarse
Fine
یࡈ࣏ࢽ
Standard
ଥࢿ
Cinema
Dynamic Contrast z z z z
EXIT
ࢇࢷ֩Ѝ ࣏ࢽ ۴
Custom : Customize the contrast and brightness as required.
Standard : Obtain a picture quality suitable for editing documents or using Internet.
Game : Obtain a picture quality suitable for playing games that involve many graphic effects and dynamic movements.
Cinema : Obtain the brightness and sharpness of TVs suitable for enjoying video and DVD content.
z
Dynamic Contrast : Obtain balanced brightness through automatic contrast adjustment.
4
Press [ ] to move to the option you want and press [
5
The selected option will be applied.
].
4 Screen Setup
42
4
Screen Setup
4.5
SAMSUNG MAGIC Angle
Angle allows you to configure the settings to obtain the optimum picture quality according to your viewing angle.
z
This menu is not available when
This menu is not available when
Cinema or Dynamic Contrast mode.
is enabled.
z
You can customize the angle to suit your preferences.
4.5.1
Configuring SAMSUNG MAGIC Angle
1
Press any button on the front of the product to display the Key guide. Next, press [
MENU
] to display the corresponding menu screen.
2
Press [
3
Press [ appear.
] to move to Picture and press [
] to move to Angle and press [
] on the product.
] on the product. The following screen will
PICTURE
Brightness
Contrast
Sharpness
SAMSUNG
M A G I C Bright
SAMSUNG
M A G I C Angle
Coarse
Fine
EXIT
ࢇࢷ֩Ѝ
یࡈ࣏ࢽ
Lean Back Mode 1
Lean Back Mode 2
࣏ࢽ
Group View
Custom
۴
4
1
5 5
1
2
3 z z z z z z z
Off
①
: Select this option to view directly in front of the product.
Lean Back Mode 1
②
: Select this option to view from a place slightly lower than the product.
Lean Back Mode 2
③
: Select this option to view from a place lower than Lean Back Mode 1.
Standing Mode
④
: Select this option to view from a place higher than the product.
Side Mode
⑤
: Select this option to view from either side of the product.
Group View : Select this option for more than one viewer to view from places ① ④ , and
⑤
.
Custom : Lean Back Mode 1 will be applied by default if Custom is selected.
4
Press [ ] to move to the option you want and press [ ].
5
The selected option will be applied.
4 Screen Setup
43
4
Screen Setup
4.6
Coarse
Adjust the screen frequency.
This menu is available in Analog mode only.
4.6.1
Adjusting Coarse
1
Press any button on the front of the product to display the Key guide. Next, press [
MENU
] to display the corresponding menu screen.
2
Press [
3
Press [ appear.
] to move to Picture and press [
] to move to Coarse and press [
] on the product.
] on the product. The following screen will
PICTURE
Brightness
Contrast
Sharpness
SAMSUNG
M A G I C Bright
SAMSUNG
M A G I C Angle
Coarse
Fine
EXIT
4
Adjust the Coarse using the [ ] buttons.
Custom
Off
AUTO
AUTO
4 Screen Setup
44
4
Screen Setup
4.7
Fine
Fine-adjust the screen to obtain a vivid picture.
This menu is available in Analog mode only.
4.7.1
Adjusting Fine
1
Press any button on the front of the product to display the Key guide. Next, press [
MENU
] to display the corresponding menu screen.
2
Press [
3
Press [
] to move to Picture and press [
] to move to Fine and press [
] on the product.
] on the product. The following screen will appear.
PICTURE
Brightness
Contrast
Sharpness
SAMSUNG
M A G I C Bright
SAMSUNG
M A G I C Angle
Coarse
Fine
EXIT
4
Adjust the Fine using the [ ] buttons.
Custom
Off
4 Screen Setup
45
4
Screen Setup
4.8
Response Time
Accelerate the panel response rate to make video appear more vivid and natural.
z z
It is best to set Response Time to Normal or Faster when you are not viewing a movie.
The functions available on the monitor may vary depending on the model. Refer to the actual product.
4.8.1
Configuring Response Time
1
Press any button on the front of the product to display the Key guide. Next, press [
MENU
] to display the corresponding menu screen.
2
Press [ ] to move to Picture and press [ ] on the product.
3
Press [ will appear.
] to move to Response Time and press [ ] on the product. The following screen
PICTURE
Response Time
HDMI Black Level
Normal
Faster
Fastest
4
Press [
EXIT
ࢇࢷ֩Ѝ
] to move to the option you want and press [
5
The selected option will be applied.
].
4 Screen Setup
46
4
Screen Setup
4.9
HDMI Black Level
If a DVD player or set-top box is connected to the product via HDMI, image quality degradation (contrast/ color degradation, black level, etc.) may occur, depending on the connected source device. In such case, HDMI Black Level can be used to adjust the image quality. If this is the case, correct the degraded picture quality using HDMI Black Level .
4.9.1
Configuring the HDMI Black Level Settings
1
Press any button on the front of the product to display the Key guide. Next, press [
MENU
] to display the corresponding menu screen.
2
Press [ ] to move to Picture and press [ ] on the product.
3
Press [ ] to move to HDMI Black Level and press [ screen will appear.
] on the product. The following
PICTURE
Response Time
HDMI Black Level
: Faster
Normal
Low z
EXIT
ࢇࢷ֩Ѝ
Normal : Select this mode when there is no contrast ratio degradation.
z
Low : Select this mode to reduce the black level and increase the white level when there is a contrast ratio degradation.
4
Press [ ] to move to the option you want and press [
5
The selected option will be applied.
].
HDMI Black Level may not be compatible with some source devices.
4 Screen Setup
47
5
Configuring Tint
Adjust the tint of the screen. This menu is not available when
Dynamic Contrast mode.
Bright is set to
Cinema or
5.1
SAMSUNG MAGIC Color
Color is a new picture-quality improvement technology developed independently by Samsung, which delivers vivid natural colors without picture quality degradation.
This menu is not available when
5.1.1
Configuring SAMSUNG MAGIC Color
1
Press any button on the front of the product to display the Key guide. Next, press [
MENU
] to display the corresponding menu screen.
2
Press [
3
Press [ appear.
] to move to COLOR and press [
] to move to Color and press [
] on the product.
] on the product. The following screen will
COLOR
SAMSUNG
M A G I C Color
Red
Green
Blue
Color Tone
Gamma
:
:
:
:
:
:
Off
Demo
Full
Intelligent
Normal
Mode1 z z z
ࢇࢷ֩Ѝ
EXIT
࣏ࢽ
۴
Off : Disable Color .
Demo : Compare normal screen mode with Color mode.
Full : Obtain a vivid picture quality for all areas including the flesh colors in the picture.
z
Intelligent : Improve the chroma for all areas except the flesh colors in the picture.
4
Press [ ] to move to the option you want and press [
5
The selected option will be applied.
].
5 Configuring Tint
48
5
Configuring Tint
5.2
Red
Adjust the value of the color red in the picture. (Range: 0~100)
A higher value will increase the intensity of the color.
This menu is not available when
Full or Intelligent mode.
5.2.1
Configuring Red
1
Press any button on the front of the product to display the Key guide. Next, press [
MENU
] to display the corresponding menu screen.
2
Press [
3
Press [
] to move to COLOR and press [
] to move to Red and press [
] on the product.
] on the product. The following screen will appear.
COLOR
SAMSUNG
M A G I C Color
Red
Green
Blue
Color Tone
Gamma
:
:
:
:
:
:
Off
Normal
Mode1
4
Adjust the Red using the [ ] buttons.
5 Configuring Tint
49
5
Configuring Tint
5.3
Green
Adjust the value of the color green in the picture. (Range: 0~100)
A higher value will increase the intensity of the color.
This menu is not available when
Full or Intelligent mode.
5.3.1
Configuring Green
1
Press any button on the front of the product to display the Key guide. Next, press [
MENU
] to display the corresponding menu screen.
2
Press [
3
Press [
] to move to COLOR and press [
] to move to Green and press [
] on the product.
] on the product. The following screen will appear.
COLOR
SAMSUNG
M A G I C Color
Red
Green
Blue
Color Tone
Gamma
:
:
:
:
:
:
Off
Normal
Mode1
4
Adjust the Green using the [ ] buttons.
5 Configuring Tint
50
5
Configuring Tint
5.4
Blue
Adjust the value of the color blue in the picture. (Range: 0~100)
A higher value will increase the intensity of the color.
This menu is not available when
Full or Intelligent mode.
5.4.1
Configuring Blue
1
Press any button on the front of the product to display the Key guide. Next, press [
MENU
] to display the corresponding menu screen.
2
Press [
3
Press [
] to move to COLOR and press [
] to move to Blue and press [
] on the product.
] on the product. The following screen will appear.
COLOR
SAMSUNG
M A G I C Color
Red
Green
Blue
Color Tone
Gamma
:
:
:
:
:
:
Off
Normal
Mode1
4
Adjust the Blue using the [ ] buttons.
5 Configuring Tint
51
5
Configuring Tint
5.5
Color Tone
Adjust the general color tone of the picture. z z
This menu is not available when
This menu is not available when
is in Full or Intelligent mode.
is enabled.
5.5.1
Configuring the Color Tone Settings
1
Press any button on the front of the product to display the Key guide. Next, press [
MENU
] to display the corresponding menu screen.
2
Press [
3
Press [ appear.
] to move to COLOR and press [
] to move to Color Tone and press [
] on the product.
] on the product. The following screen will
COLOR z z z z z
SAMSUNG
M A G I C Color
Red
Green
Blue
Color Tone
Gamma
:
:
:
:
:
:
Off
&RRO
ֻҖ
:DUP
&XVWRP
ࢇࢷ֩Ѝ ࣏ࢽ ۴
Cool 2 : Set the color temperature to be cooler than Cool 1 .
Cool 1 : Set the color temperature to be cooler than Normal mode.
Normal : Display the standard color tone.
Warm 1 : Set the color temperature to be warmer than Normal mode.
Warm 2 : Set the color temperature to be warmer than Warm 1 .
z
Custom : Customize the color tone.
4
Press [ ] to move to the option you want and press [
5
The selected option will be applied.
].
5 Configuring Tint
52
5
Configuring Tint
5.6
Gamma
Adjust the mid-range brightness (Gamma) of the picture.
This menu is not available when
5.6.1
Configuring Gamma
1
Press any button on the front of the product to display the Key guide. Next, press [
MENU
] to display the corresponding menu screen.
2
Press [
3
Press [ appear.
] to move to COLOR and press [
] to move to Gamma and press [
] on the product.
] on the product. The following screen will
COLOR
SAMSUNG
M A G I C Color
Red
Green
Blue
Color Tone
Gamma
:
:
:
:
:
:
Off
Normal
ֻҖ
Mode2
Mode3
ࢇࢷ֩Ѝ ࣏ࢽ
4
Press [ ] to move to the option you want and press [
5
The selected option will be applied.
AUTO
۴
].
5 Configuring Tint
53
6
Resizing or Relocating the Screen
6.1
H-Position & V-Position
H-Position : Move the screen to the left or right.
V-Position : Move the screen up or down.
z z
Available only when Image Size is set to
Screen Fit .
This menu is available in Analog mode only.
6.1.1
Configuring H-Position & V-Position
1
Press any button on the front of the product to display the Key guide. Next, press [
MENU
] to display the corresponding menu screen.
2
Press [
3
Press [ appear.
] to move to SIZE&POSITION and press [ ] on the product.
] to move to H-Position or V-Position , and press [ ]. The following screen will
SIZE&POSITION
H-Position
V-Position
Image Size
Menu H-Position
Menu V-Position
Auto
SIZE&POSITION
H-Position
V-Position
Image Size
Menu H-Position
Menu V-Position
Auto
EXIT
ࢇࢷ֩Ѝ
4
Press [
࣏ࢽ ۴
] to configure H-Position or V-Position .
EXIT
ࢇࢷ֩Ѝ ࣏ࢽ ۴
6 Resizing or Relocating the Screen
54
6
Resizing or Relocating the Screen
6.2
Image Size
Change the picture size.
6.2.1
Changing the Image Size
1
Press any button on the front of the product to display the Key guide. Next, press [
MENU
] to display the corresponding menu screen.
2
Press [ ] to move to SIZE&POSITION and press [ ] on the product.
3
Press [ appear.
] to move to Image Size and press [ ] on the product. The following screen will
SIZE&POSITION
H-Position
V-Position
Image Size
Menu H-Position
Menu V-Position
Wide z z
EXIT
ࢇࢷ֩Ѝ
AUTO AUTO
Auto : Display the picture according to the aspect ratio of the input source.
Wide : Display the picture in full screen regardless of the aspect ratio of the input source.
SIZE&POSITION
H-Position
V-Position
Image Size
Menu H-Position
Menu V-Position
Wide
Screen Fit z z z
EXIT
ࢇࢷ֩Ѝ
4:3 : Display the picture with an aspect ratio of 4:3. Suitable for videos and standard broadcasts.
Wide : Display the picture in full screen regardless of the aspect ratio of the input source.
Screen Fit : Display the picture with the original aspect ratio without cutting off.
Changing the screen size is available when the following conditions are satisfied.
z
A digital output device is connected using the DVI cable.
4
Press [ z
The input signal is 480p, 576p, 720p, 1080i, or 1080p.
] to move to the option you want and press [
5
The selected option will be applied.
].
6 Resizing or Relocating the Screen
55
6
Resizing or Relocating the Screen
6.3
Menu H-Position & Menu V-Position
Menu H-Position : Move the menu position to the left or right.
Menu V-Position : Move the menu position up or down.
6.3.1
Configuring Menu H-Position & Menu V-Position
1
Press any button on the front of the product to display the Key guide. Next, press [
MENU
] to display the corresponding menu screen.
2
Press [ ] to move to SIZE&POSITION and press [ ] on the product.
3
Press [ ] to move to Menu H-Position or Menu V-Position , and press [ screen will appear.
]. The following
SIZE&POSITION
H-Position
V-Position
Image Size
Menu H-Position
Menu V-Position
Auto
SIZE&POSITION
H-Position
V-Position
Image Size
Menu H-Position
Menu V-Position
Auto
EXIT
ࢇࢷ֩Ѝ
4
Press [
࣏ࢽ
AUTO AUTO
۴
EXIT
ࢇࢷ֩Ѝ
] to configure Menu H-Position or Menu V-Position .
࣏ࢽ ۴
6 Resizing or Relocating the Screen
56
7
Setup and Reset
7.1
Reset
Return all the settings for the product to the default factory settings.
7.1.1
Initializing Settings (Reset)
1
Press any button on the front of the product to display the Key guide. Next, press [
MENU
] to display the corresponding menu screen.
2
Press [
3
Press [
] to move to SETUP&RESET and press [
] to move to Reset and press [
] on the product.
] on the product. The following screen will appear.
SETUP&RESET
Reset
Language
Eco Saving
Off Timer On/Off
Off Timer Setting
PC/AV Mode
Key Repeat Time
English
Off
Off
Acceleration
Reset all settings?
Yes No
EXIT
4
Press [ ] to move to the option you want and press [
5
The selected option will be applied.
AUTO
].
7 Setup and Reset
57
7
Setup and Reset
7.2
Language
Set the menu language. z z
A change to the language setting will only be applied to the onscreen menu display.
It will not be applied to other functions on your PC.
7.2.1
Changing the Language
1
Press any button on the front of the product to display the Key guide. Next, press [
MENU
] to display the corresponding menu screen.
2
Press [
3
Press [ appear.
] to move to SETUP&RESET and press [
] to move to Language and press [
] on the product.
] on the product. The following screen will
4
Press [
SETUP&RESET
Reset
Language
Eco Saving
Off Timer On/Off
Off Timer Setting
PC/AV Mode
Key Repeat Time
EXIT
ࢇࢷ֩Ѝ
'HXWVFK
(QJOLVK
(VSDxRO
)UDQoDLV
3RUWXJXrV
ƧNJLjLjǁƿǀ
6YHQVND
ᣣᧄ⺆
ଞ˲߭
∝䇁
ࢇѰ
] to move to the language you want and press [
5
The selected option will be applied.
۴
].
7 Setup and Reset
58
7
Setup and Reset
7.3
Eco Saving
The Eco Saving function reduces power consumption by controlling the electric current used by the monitor panel.
This menu is not available when
Dynamic Contrast mode.
7.3.1
Configuring Eco Saving
1
Press any button on the front of the product to display the Key guide. Next, press [
MENU
] to display the corresponding menu screen.
2
Press [
3
Press [ appear.
] to move to SETUP&RESET and press [
] to move to Eco Saving and press [
] on the product.
] on the product. The following screen will z z
SETUP&RESET
Reset
Language
Eco Saving
Off Timer On/Off
Off Timer Setting
PC/AV Mode
Key Repeat Time
EXIT
ࢇࢷ֩Ѝ
English
ଥࢿ
Acceleration
ࢇѰ ۴
75% : Change the monitor power consumption to 75% of the default level.
50% : Change the monitor power consumption to 50% of the default level.
z
Off : Deactivate the Eco Saving function.
4
Press [ ] to move to the option you want and press [
5
The selected option will be applied.
].
7 Setup and Reset
59
7
Setup and Reset
7.4
Off Timer On/Off
You can set the product to automatically turn off.
7.4.1
Configuring Off Timer On/Off
1
Press any button on the front of the product to display the Key guide. Next, press [
MENU
] to display the corresponding menu screen.
2
Press [ ] to move to SETUP&RESET and press [ ] on the product.
3
Press [ will appear.
] to move to Off Timer On/Off and press [ ] on the product. The following screen z
SETUP&RESET
Reset
Language
Eco Saving
Off Timer On/Off
Off Timer Setting
PC/AV Mode
Key Repeat Time
EXIT
ࢇࢷ֩Ѝ
English
: Off
Off
On
Acceleration
ࢇѰ ۴
Off : Deactivate the off timer so that the product does not power off automatically.
z
On : Activate the off timer so that the product powers off automatically.
4
Press [ ] to move to the option you want and press [
5
The selected option will be applied.
].
7 Setup and Reset
60
7
Setup and Reset
7.5
Off Timer Setting
The off timer can be set within a range of 1 to 23 hours. The product will automatically power off after the specified number of hours.
This menu is available only when Off Timer On/Off is set to On .
7.5.1
Configuring Off Timer Setting
1
Press any button on the front of the product to display the Key guide. Next, press [
MENU
] to display the corresponding menu screen.
2
Press [
3
Press [ will appear.
] to move to SETUP&RESET and press [
] to move to Off Timer Setting and press [
] on the product.
] on the product. The following screen
SETUP&RESET
Reset
Language
Eco Saving
Off Timer On/Off
Off Timer Setting
PC/AV Mode
Key Repeat Time
EXIT
ࢇࢷ֩Ѝ
] to configure Off Timer Setting .
ࢇѰ
English
Off
On
Acceleration
4h
۴
4
Press [
For products for the market in Europe, the Off Timer On/Off is set to automatically activate 4 hours after the product powers on. This is done in accordance with power supply regulations. If you do not want the timer to activate, go to MENU → SETUP&RESET and set Off Timer On/Off to Off .
7 Setup and Reset
61
7
Setup and Reset
7.6
PC/AV Mode
Set PC/AV Mode to AV . The picture size will be enlarged. This option is useful when you view a movie.
PC/AV Mode is available in HDMI mode only.
7.6.1
Configuring PC/AV Mode
1
Press any button on the front of the product to display the Key guide. Next, press [
MENU
] to display the corresponding menu screen.
2
Press [
3
Press [ appear.
] to move to SETUP&RESET and press [
] to move to PC/AV Mode and press [
] on the product.
] on the product. The following screen will
SETUP&RESET
Reset
Language
Eco Saving
Off Timer On/Off
Off Timer Setting
PC/AV Mode
Key Repeat Time
ࢇࢷ֩Ѝ ࢇѰ
English
Off
On
4h
AUTO AUTO
۴
PC/AV Mode
+'0,
+'0,0+/
3&
$9
'9,3&
ೳ
PC/AV Mode
+'0,
3&
$9
ೳ
EXIT
ࢇࢷ֩Ѝ ࢇѰ
AUTO
۴
S24B750V/S27B750V
4
Press [ ] to move to the option you want and press [
5
The selected option will be applied.
EXIT
ࢇࢷ֩Ѝ ࢇѰ
S24B750H/S27B750H
].
AUTO AUTO
۴
7 Setup and Reset
62
7
Setup and Reset
7.7
Key Repeat Time
Control the response rate of a button when the button is pressed.
7.7.1
Configuring Key Repeat Time
1
Press any button on the front of the product to display the Key guide. Next, press [
MENU
] to display the corresponding menu screen.
2
Press [ ] to move to SETUP&RESET and press [ ] on the product.
3
Press [ will appear.
] to move to Key Repeat Time and press [ ] on the product. The following screen
SETUP&RESET z
Reset
Language
Eco Saving
Off Timer On/Off
Off Timer Setting
PC/AV Mode
Key Repeat Time
EXIT
ࢇࢷ֩Ѝ
:
:
:
: English
: Off
: On
Acceleration
1 sec
2 sec
No Repeat
ݤɾ
ࢇѰ
AUTO AUTO
۴
Acceleration , 1 sec , or 2 sec can be selected. If No Repeat is selected, a command responds only once when a button is pressed.
4
Press [ ] to move to the option you want and press [
5
The selected option will be applied.
].
7 Setup and Reset
63
7
Setup and Reset
7.8
Customized Key (S24B750H / S27B750H)
You can customize Customized Key as follows.
7.8.1
Configuring Customized Key
1
Press any button on the front of the product to display the Key guide. Next, press [
MENU
] to display the corresponding menu screen.
2
Press [ ] to move to SETUP&RESET and press [ ] on the product.
3
Press [ will appear.
] to move to Customized Key and press [ ] on the product. The following screen
SETUP&RESET
Customized Key
Auto Source
Display Time
Menu Transparency
:
:
:
SAMSUNG
M A G I C Angle
SAMSUNG
M A G I C Bright
Eco Saving
Image Size
: On z
-
Adjust
-
Enter
4
Press [ ] to move to the option you want and press [
5
The selected option will be applied.
].
7 Setup and Reset
64
7
Setup and Reset
7.9
Auto Source
You can activate Auto Source .
7.9.1
Configuring Auto Source
1
Press any button on the front of the product to display the Key guide. Next, press [
MENU
] to display the corresponding menu screen.
2
Press [ ] to move to SETUP&RESET and press [ ] on the product.
3
Press [ appear.
] to move to Auto Source and press [ ] on the product. The following screen will
SETUP&RESET
Customized Key
Auto Source
Display Time
Menu Transparency
Eco Saving
Auto
Manual
On z
EXIT
Return Adjust
Auto : The input source is automatically recognized.
z
Manual : Manually select an input source.
4
Press [ ] to move to the option you want and press [
5
The selected option will be applied.
Enter
].
7 Setup and Reset
65
7
Setup and Reset
7.10 Display Time
Set the on-screen display (OSD) menu to automatically disappear if the menu is not used for a specified period of time.
Display Time can be used to specify the time after which you want the OSD menu to disappear.
7.10.1
Configuring Display Time
1
Press any button on the front of the product to display the Key guide. Next, press [
MENU
] to display the corresponding menu screen.
2
Press [ ] to move to SETUP&RESET and press [ ] on the product.
3
Press [ appear.
] to move to Display Time and press [ ] on the product. The following screen will
SETUP&RESET
Customized Key
Auto Source
Display Time
Menu Transparency
Eco Saving
0DQXDO
VHF
VHF
VHF
VHF
EXIT
Return Adjust
4
Press [ ] to move to the option you want and press [
5
The selected option will be applied.
Enter
].
7 Setup and Reset
66
7
Setup and Reset
7.11 Menu Transparency
Set the transparency for the menu windows:
7.11.1
Changing Menu Transparency
1
Press any button on the front of the product to display the Key guide. Next, press [
MENU
] to display the corresponding menu screen.
2
Press [ ] to move to SETUP&RESET and press [ ] on the product.
3
Press [ ] to move to Menu Transparency and press [ screen will appear.
] on the product. The following
SETUP&RESET
Customized Key
Auto Source
Display Time
Menu Transparency
:
Eco Saving
: Manual
: 20 sec
:
Off
On
4
Press [
EXIT
Return Adjust
] to move to the option you want and press [
AUTO AUTO
Enter
].
5
The selected option will be applied.
7 Setup and Reset
67
8
INFORMATION Menu and Others
8.1
INFORMATION
View the current input source, frequency and resolution.
8.1.1
Displaying INFORMATION
1
Press any button on the front of the product to display the Key guide. Next, press [
MENU
] to display the corresponding menu screen.
2
Press [ appear.
] to move to INFORMATION . The current input source, frequency and resolution will
PICTURE
COLOR
SIZE&POSITION
SETUP&RESET
INFORMATION
EXIT
֩ЍیԂक
EXIT
HDMI 1
67.5kHz 60Hz PP
1920 x 1080
Optimum Resolution
1920 x 1080 60Hz
࣏ࢽ
AUTO AUTO
۴
The displayed menu items may vary depending on the model.
8 INFORMATION Menu and Others
68
8
INFORMATION Menu and Others
8.2
Configuring Volume in the Initial Screen
(S24B750V / S27B750V)
8.2.1
Volume
The Volume can be adjusted in the initial screen on the S24B750V / S27B750V model only.
Adjust the Volume by pressing the [ ] button when the Key guide is displayed.
1
Press any button on the front of the product (when no menu screen is displayed) to display the Key guide. Next, press [ ].
2
Press [ appear.
] to move to Volume and press [ ] on the product. The following screen will
Volume
Volume
Sound Mode
ೳ
Standard
3
Adjust the Volume using the [
EXIT
ࢇࢷ֩Ѝ
EXIT
] buttons.
ࢇѰ
AUTO
AUTO
۴
8 INFORMATION Menu and Others
69
8
INFORMATION Menu and Others
8.2.2
Sound Mode
Select a picture mode (Mode) suitable for the environment where the product will be used.
1
Press any button on the front of the product (when no menu screen is displayed) to display the Key guide. Next, press [ ].
2
Press [ appear.
] to move to Sound Mode and press [ ] on the product. The following screen will
Volume
Volume
Sound Mode Standard
Music
Movie
Clear Voice
ೳ z z z
EXIT
ࢇࢷ֩Ѝ
EXIT
ࢇѰ
AUTO AUTO AUTO
۴
Standard : Provides sound suitable for any type of content.
Music : Provides sound close to the original experience.
Movie : Provides a grand sound experience.
z
Clear Voice : Hear voices clearly.
3
Press [ ] to move to the option you want and press [
4
The selected option will be applied.
].
8 INFORMATION Menu and Others
70
8
INFORMATION Menu and Others
8.3
Configuring Brightness and Contrast in the Initial Screen
(S24B750H / S27B750H)
The Brightness and Contrast can be adjusted in the initial screen on the S24B750H / S27B750H model only.
Adjust the Brightness or Contrast setting using the [ ] buttons in the initial screen (where no OSD menu is displayed).
1
Press any button on the front of the product (when no menu screen is displayed) to display the Key guide. Next, press [ ]. The following screen will appear.
Brightness
100
Contrast
75
EXIT
2
Press the [ ] button to alternate between the Brightness and Contrast settings.
3
Adjust the Brightness or Contrast setting using the [ ] buttons.
8 INFORMATION Menu and Others
71
9
Installing the Software
9.1
Magic Tune
9.1.1
What is MagicTune?
MagicTune is a software program that helps with monitor adjustments by providing comprehensive descriptions of monitor functions and easy-to-understand guidelines.
You can adjust the product with the mouse and the keyboard without using the operating buttons of the product.
9.1.2
Installing the Software
1
Insert the installation CD into the CD-ROM drive.
2
Select the MagicTune setup program.
If the pop-up screen for the software installation does not appear on the main screen, find and double-click the MagicTune setup file on the CD-ROM.
3
Select the installation language and click [Next].
4
Complete the remaining software installation steps according to the instructions displayed on the screen.
z z z
The software may not work properly if you do not restart the computer after the installation.
The MagicTune icon may not appear depending on the computer system and the product specifications.
If the shortcut icon does not appear, press the F5 key.
Restrictions and Problems with the Installation (MagicTune™)
The installation of MagicTune™ may be affected by the graphics card, motherboard and the networking environment.
System Requirements
OS z
Windows XP, Windows Vista, Windows 7
9 Installing the Software
72
9
Installing the Software
9.1.3
Removing the Software
You can only remove MagicTune™ through [Add or Remove Programs] in Windows.
To remove MagicTune™, complete the following steps.
1
Click [Start] select [Settings], and select [Control Panel] from the menu.
For Windows XP, click [Start], and select [Control Panel] from the menu.
2
Double-click the [Add or Remove Programs] icon in the Control Panel.
3
In the [Add/Remove] window, find and select MagicTune™ so that it is highlighted.
4
Click [Change or Remove Programs] to remove the software.
5
Select [Yes] to start removing MagicTune™.
6
Wait until a message box appears informing you that the software has been removed completely.
For technical support, the FAQ (frequently asked questions) or information about the software upgrade for MagicTune™, please visit our website(http://www.samsung.com/us/consumer/ learningresources/monitor/magetune/pop_intro.html).
9 Installing the Software
73
10
Troubleshooting Guide
10.1 Requirements Before Contacting Samsung Customer
Service Center
10.1.1
Testing the Product
Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, contact Samsung Customer Service Center.
Check if your product is operating normally by using the product test function.
If the screen is turned off and the power indicator blinks even though the product is properly connected to a PC, perform a self-diagnosis test.
1
Power off both the PC and product.
2
Disconnect the cables from the product.
3
Power on the product.
4
If the message Check Signal Cable appears, the product is working normally.
If the screen remains blank, check the PC system, video controller and cable.
10.1.2
Checking the Resolution and Frequency
For a mode that exceeds the supported resolution (refer to "11.3 Standard Signal Mode Table"), the
message Not Optimum Mode will appear for a short time.
10.1.3
Check the following.
Installation issue (PC mode)
The screen keeps switching on and off. Check the cable connection between the product and PC, and ensure the connectors are locked.
(Refer to "3.3 Connecting and Using a PC")
The power LED is off. The screen will not switch on.
The message Check Signal Cable
Screen issue
appears.
Check that the power cable is connected
properly. (Refer to "3.3 Connecting and Using a
Check that the cable is properly connected to the
product. (Refer to "3.3 Connecting and Using a
Check that the device connected to the product is powered on.
10 Troubleshooting Guide
74
10
Troubleshooting Guide
Screen issue
" Not Optimum Mode
The screen appears unstable and shaky.
There are shadows or ghost images left on the screen.
" is displayed.
The images on the screen look distorted.
The screen is not clear. The screen is blurry.
This message appears if the signal from the graphics card exceeds the maximum resolution or frequency for the product.
Change the maximum resolution and frequency to suit the product performance, referring to
Standard Signal Mode Table (page 82).
Check the cable connection to the product (Refer
to "3.3 Connecting and Using a PC")
Adjust Coarse
Fine
Remove any accessories (video extension cable, etc.) and try again.
Set the resolution and frequency to the
recommended level. (Refer to "11.1 General")
Check that the resolution and frequency for the
PC are within the range of resolution and frequency compatible with the product. Next, if required, change the settings, referring to
Standard Signal Mode Table (page 82) in this
manual and the INFORMATION menu on the product.
The screen is too bright. The screen is too dark.
Adjust Brightness
Contrast
Screen color is inconsistent.
Change the COLOR settings.
(Refer to " Configuring Tint")
The colors on the screen have a shadow and are distorted.
White does not really look white.
There is no image on the screen and the power
LED blinks every 0.5 to 1 second.
Change the
Change the
COLOR
COLOR
settings.
(Refer to " Configuring Tint")
settings.
(Refer to " Configuring Tint")
The product is operating in power-saving mode.
Press any key on the keyboard or move the mouse to return to normal operating mode.
There is no sound.
Sound issue (S24B750V / S27B750V)
Check the connection of the audio cable or adjust the volume.
Check the volume.
10 Troubleshooting Guide
75
10
Troubleshooting Guide
The volume is too low.
Sound issue (S24B750V / S27B750V)
Adjust the volume.
If the volume is still low after turning it up to the maximum level, adjust the volume on your PC sound card or software program.
Source device issue
A beeping sound is heard when my PC is booting.
If a beeping sound is heard when your PC is booting, have your PC serviced.
10 Troubleshooting Guide
76
10
Troubleshooting Guide
10.2 Q & A
Question
How can I change the frequency?
Answer
Set the frequency on your graphics card.
z z z z
Windows XP: Go to Control Panel Appearance and
Themes Display Settings Advanced Monitor , and adjust Refresh rate under Monitor settings .
Windows ME/2000: Go to Control Panel Display
Settings Advanced Monitor , and adjust Refresh rate under Monitor settings .
Windows Vista: Go to Control Panel Appearance and
Personalization Personalization Display Settings
Advanced Settings Monitor , and adjust Refresh rate under Monitor settings .
Windows 7: Go to Control Panel Appearance and
Personalization Display Screen Resolution
Advanced settings Monitor , and adjust Refresh rate under
Monitor settings .
10 Troubleshooting Guide
77
10
Troubleshooting Guide
How can I change the resolution?
Question
How do I set power-saving mode?
z z z z z z z z
Answer
Windows XP: Go to Control Panel Appearance and
Themes Display Settings , and adjust the resolution.
Windows ME/2000: Go to Control Panel Display
Settings , and adjust the resolution.
Windows Vista: Go to Control Panel Appearance and
Personalization Personalize Display Settings , and adjust the resolution.
Windows 7: Go to Control Panel Appearance and
Personalization Display Adjust Resolution , and adjust the resolution.
Windows XP: Set power-saving mode in Control Panel
Appearance and Themes Display Screen Saver
Settings or BIOS SETUP on the PC.
Windows ME/2000: Set power-saving mode in Control Panel
Display Screen Saver Settings or BIOS SETUP on the
PC.
Windows Vista: Set power-saving mode in Control Panel
Appearance and Personalization Personalize Screen
Saver Settings or BIOS SETUP on the PC.
Windows 7: Set power-saving mode in Control Panel
Appearance and Personalization Personalize Screen
Saver Settings or BIOS SETUP on the PC.
Refer to the user manual for your PC or graphics card for further instructions on adjustment.
10 Troubleshooting Guide
78
11
Specifications
11.1 General
Model Name S24B750V S24B750H S27B750V S27B750H
Panel Size 24 inches (61cm) 27 inches (68cm)
Display area 531.36 mm (H) x 289.89 mm (V)
20.9 inches (H) x 11.4 inches (V)
597.6 mm (H) x 336.15 mm (V)
23.5 inches (H) x 13.2 inches (V)
Pixel pitch 0.27675 mm (H) x 0.27675 mm (V)
0.010896 inches (H) x 0.010896 inches (V)
0.31125 mm (H) x 0.31125 mm (V)
0.012254 inches (H) x 0.012254 inches (V)
Synchronization Horizontal
Frequency
Vertical
Frequency
30~81 kHz
4
9
~
75
Hz 4
9
~
75
Hz
30~81 kHz
4
9
~
75
Hz 4
9
~
75
Hz
Display Color
Resolution Optimum
Resolution
Maximum
Resolution
Maximum Pixel Clock
Power Supply
Signal connectors
Dimensions (W x H x D) /
Weight
Environmental considerations
Operating
Storage
16.7M (6 bit with Hi-FRC)
1920 x 1080 @ 60 Hz
1920 x 1080 @ 60 Hz
164MHz (Dsub/HDM1/HDMI2)
This product uses 100 to 240V.
Refer to the label at the back of the product as the standard voltage can vary in different countries.
D-Sub, HDMI1,
HDMI2/MHL
D-Sub, HDMI D-Sub, HDMI1,
HDMI2/MHL
D-Sub, HDMI
570.0 × 435.0 × 204.0 mm /
6.0 kg
22.4 x 17.1 x 8.0 inches /
13.2 lbs
636.0 × 474.0 × 204.0 mm /
6.3 kg
25.0 x 18.7 x 8.0 inches /
13.9 lbs
Temperature : 50°F – 104°F (10°C – 40°C)
Humidity : 10 % – 80 %, non-condensing
Temperature : -4°F – 113°F (-20°C – 45°C)
Humidity : 5 % – 95 %, non-condensing
11 Specifications
79
11
Specifications
Model Name
Plug-and-Play
Panel Dots (Pixels)
S24B750V S24B750H S27B750V S27B750H
This monitor can be installed and used with any Plug-and-Play compatible systems. Two-way data exchange between the monitor and PC system optimizes the monitor settings. Monitor installation takes place automatically. However, you can customize the installation settings if desired.
Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may be brighter or darker on the LCD panel. This does not affect product performance.
The above specifications are subject to change without notice to improve quality.
This device is a Class B digital apparatus.
(USA only)
Dispose unwanted electronics through an approved recycler.
To find the nearest recycling location, go to our website: www.samsung.com/recyclingdirect or call, (877) 278 - 0799
11 Specifications
80
11
Specifications
11.2 PowerSaver
The power-saving function of this product reduces power consumption by switching off the screen and changing the color of the power LED if the product is not used for a specified period of time. The power is not turned off in power-saving mode. To switch the screen back on, press any key on the keyboard or move the mouse. Power-saving mode functions only when the product is connected to a PC that has a power-saving function.
S24B750V
PowerSaver
Power Indicator
Power Consumption
S27B750V
Normal operation mode
On
30 W
Power saving mode
Blinking
Less than 0.5 W
Power off
(Power button)
Off
Less than 0.5 W
PowerSaver
Power Indicator
Power Consumption
S24B750H
Normal operation mode
On
42 W
Power saving mode
Blinking
Less than 0.5 W
Power off
(Power button)
Off
Less than 0.5 W
PowerSaver
Power Indicator
Power Consumption
S27B750H
Normal operation mode
On
27 W
Power saving mode
Blinking
Less than 0.5 W
Power off
(Power button)
Off
Less than 0.5 W
PowerSaver
Power Indicator
Power Consumption
Normal operation mode
On
38 W
Power saving mode
Blinking
Less than 0.5 W
Power off
(Power button)
Off
Less than 0.5 W z z
The power consumption level can vary in different operating conditions or when settings are changed.
To reduce the power consumption to 0 watts, turn off the power switch on the back of the product or disconnect the power cable. Be sure to disconnect the power cable when you will not be using the product for an extended period of time. To reduce the power consumption to 0 watts when the power switch is not available, disconnect the power cable.
11 Specifications
81
11
Specifications
11.3 Standard Signal Mode Table
z
This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Therefore, a resolution other than the specified resolution may degrade the picture quality. To avoid this, it is recommended that you select the optimum resolution specified for the screen size of your product.
z
Check the frequency when you exchange a CDT monitor (connected to a PC) for an LCD monitor.
If the LCD monitor does not support 85Hz, change the vertical frequency to 60Hz using the CDT monitor before you exchange it with the LCD monitor.
If a signal that belongs to the following standard signal modes is transmitted from your PC, the screen will automatically be adjusted. If the signal transmitted from the PC does not belong to the standard signal modes, the screen may be blank even though the power LED turns on. In such a case, change the settings according to the following table by referring to the graphics card user manual.
D-Sub, HDMI1, HDMI2
Resolution
IBM, 640 x 480, 60Hz
VESA, 800 x 600, 56Hz
VESA, 800 x 600, 60Hz
VESA, 1024 x 768, 60Hz
VESA, 1280 x 720, 60Hz
VESA, 1280 x 800, 60Hz
VESA, 1280 x 1024, 60Hz
VESA, 1440 x 900, 60Hz
VESA, 1600 x 900, 60Hz
VESA, 1680 x 1050, 60Hz
VESA, 1920 x 1080, 60Hz
HDMI1, HDMI2
Horizontal
Frequency (kHz)
31.000
35.156
37.879
48.363
45.000
37.879
63.981
55.935
60.000
65.290
67.500
Vertical
Frequency (Hz)
59.940
56.000
60.000
60.000
60.000
60.317
60.000
59.887
60.000
59.954
60.000
Resolution
480p, 720 x 480, 60Hz
576p, 720 x 576, 50Hz
720p, 1280 x 720, 50Hz
720p, 1280 x 720, 60Hz
1080i, 1920 x 1080i, 50Hz
1080i, 1920 x 1080i, 60Hz
1080p, 1920 x 1080p, 50Hz
1080p, 1920 x 1080p, 60Hz
Horizontal
Frequency (kHz)
31.470
31.250
37.500
45.000
28.120
33.750
56.250
67.500
Vertical
Frequency (Hz)
60.000
50.000
50.000
60.000
50.000
60.000
50.000
60.000
Pixel Clock
(MHz)
25.170
36.000
40.000
40.000
74.250
65.000
108.000
106.500
108.000
146.250
148.500
Pixel Clock
(MHz)
27.000
27.000
74.250
74.250
74.250
74.250
148.500
148.500
Sync Polarity
(H/V)
+/+
+/+
+/+
-/+
-/-
+/+
+/+
-/-
+/+
-/+
+/+
Sync Polarity
(H/V)
-/-
-/-
+/+
+/+
+/+
+/+
+/+
+/+
11 Specifications
82
11
Specifications z z
Horizontal Frequency
The time required to scan a single line from the left to the right side of the screen is called a horizontal cycle. The reciprocal number of a horizontal cycle is called horizontal frequency.
Horizontal frequency is measured in kHz.
Vertical Frequency
Repeating the same picture dozens of times per second allows you to view natural pictures. The repeat frequency is called "vertical frequency" or "refresh rate" and is indicated in Hz.
11 Specifications
83
Appendix
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.
NORTH AMERICA
U.S.A
CANADA
MEXICO
1-800-SAMSUNG (726-7864)
1-800-SAMSUNG (726-7864)
01-800-SAMSUNG (726-7864) http://www.samsung.com
http://www.samsung.com/ca
(English) http://www.samsung.com/ca_fr
(French) http://www.samsung.com
ARGENTINE
BOLIVIA
BRAZIL
CHILE
COLOMBIA
COSTA RICA
LATIN AMERICA
0800-333-3733
800-10-7260
0800-124-421
4004-0000
800-SAMSUNG (726-7864)
From mobile 02-482 82 00
01-8000112112
0-800-507-7267 http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
DOMINICA
ECUADOR
EL SALVADOR
1-800-751-2676
1-800-10-7267
800-6225 http://www.samsung.com
http://www.samsung.com/latin
(Spanish) http://www.samsung.com/latin_en
(English) http://www.samsung.com/latin
(Spanish) http://www.samsung.com/latin_en
(English) http://www.samsung.com/latin
(Spanish) http://www.samsung.com/latin_en
(English) http://www.samsung.com/latin
(Spanish) http://www.samsung.com/latin_en
(English)
Appendix
84
Appendix
GUATEMALA
HONDURAS
JAMAICA
NICARAGUA
PANAMA
PERU
PUERTO RICO
TRINIDAD & TOBAGO
VENEZUELA
AUSTRIA
BELGIUM
BOSNIA
BULGARIA
CROATIA
CYPRUS
LATIN AMERICA
1-800-299-0013
800-27919267
1-800-234-7267
00-1800-5077267
800-7267
0-800-777-08
1-800-682-3180
1-800-SAMSUNG (726-7864)
0-800-100-5303 http://www.samsung.com/latin
(Spanish) http://www.samsung.com/latin_en
(English) http://www.samsung.com/latin
(Spanish) http://www.samsung.com/latin_en
(English) http://www.samsung.com
http://www.samsung.com/latin
(Spanish) http://www.samsung.com/latin_en
(English) http://www.samsung.com/latin
(Spanish) http://www.samsung.com/latin_en
(English) http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
EUROPE
0810 - SAMSUNG
(7267864, € 0.07/min)
02-201-24-18 http://www.samsung.com
05 133 1999
07001 33 11 , normal tariff
062 SAMSUNG (062 726 7864)
8009 4000 only from landline
(+30) 210 6897691 from mobile and land line http://www.samsung.com/be
(Dutch) http://www.samsung.com/be_fr
(French) http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
Appendix
85
Appendix
CZECH
DENMARK
EIRE
ESTONIA
FINLAND
FRANCE
GERMANY
GREECE
HUNGARY
ITALIA
LATVIA
LITHUANIA
LUXEMBURG
MACEDONIA
MONTENEGRO
NETHERLANDS
NORWAY
POLAND
PORTUGAL
RUMANIA
SERBIA
SLOVAKIA
SPAIN
EUROPE
800 - SAMSUNG (800-726786) http://www.samsung.com
Samsung Electronics Czech and Slovak, s.r.o.,
Oasis Florenc, Sokolovská 394/17, 180 00, Praha 8
70 70 19 70
0818 717100
800-7267
09 85635050 http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
01 48 63 00 00
80111-SAMSUNG (80111 726
7864) only from land line
(+30) 210 6897691 from mobile and land line http://www.samsung.com
0180 5 SAMSUNG bzw.
0180 5 7267864* (*0,14 €/Min. aus dem dt. Festnetz, aus dem
Mobilfunk max. 0,42 €/Min.) http://www.samsung.com
http://www.samsung.com
06-80-SAMSUNG (726-7864)
800-SAMSUNG (726-7864)
8000-7267
8-800-77777 http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
261 03 710
023 207 777
020 405 888
0900 - SAMSUNG
(0900-7267864) (€ 0,10/Min)
815 56480 http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
0 801-1SAMSUNG (172-678)
+48 22 607-93-33 http://www.samsung.com
http://www.samsung.com
808 20 - SAMSUNG (808 20 7267) http://www.samsung.com
08008 SAMSUNG (08008 726
7864)
TOLL FREE No.
http://www.samsung.com
0700 Samsung (0700 726 7864) http://www.samsung.com
0800 - SAMSUNG (0800-726 786) http://www.samsung.com
902 - 1 - SAMSUNG (902 172 678) http://www.samsung.com
Appendix
86
Appendix
U.K
ARMENIA
AZERBAIJAN
BELARUS
GEORGIA
KAZAKHSTAN
KYRGYZSTAN
MOLDOVA
MONGOLIA
RUSSIA
TADJIKISTAN
UKRAINE
SWEDEN
SWITZERLAND
UZBEKISTAN
AUSTRALIA
CHINA
HONG KONG
0771 726 7864 (SAMSUNG)
0848-SAMSUNG
EUROPE
(7267864, CHF 0.08/min) http://www.samsung.com
http://www.samsung.com/ch
(German) http://www.samsung.com/ch_fr
(French) http://www.samsung.com
0330 SAMSUNG (7267864)
0-800-05-555
088-55-55-555
810-800-500-55-500
0-800-555-555
8-10-800-500-55-500
(GSM: 7799)
00-800-500-55-500
0-800-614-40
+7-800-555-55-55
8-800-555-55-55
8-10-800-500-55-500
0-800-502-000
CIS http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com/ua
(Ukrainian) http://www.samsung.com/ua_ru
(Russian) http://www.samsung.com
8-10-800-500-55-500
ASIA PACIFIC
1300 362 603
400-810-5858
(852) 3698 - 4698 http://www.samsung.com
http://www.samsung.com
http://www.samsung.com/hk
(Chinese) http://www.samsung.com/hk_en
(English)
Appendix
87
Appendix
INDIA
INDONESIA
JAPAN
MALAYSIA
NEW ZEALAND
PHILIPPINES
SINGAPORE
TAIWAN
THAILAND
VIETNAM
BAHRAIN
EGYPT
IRAN
JORDAN
KUWAIT
ASIA PACIFIC
1800 1100 11
3030 8282
1800 3000 8282
1800 266 8282
0800-112-8888
021-5699-7777
0120-327-527
1800-88-9999
0800 SAMSUNG (0800 726 786)
1-800-10-SAMSUNG (726-7864) for PLDT
1-800-3-SAMSUNG (726-7864) for Digitel
1-800-8-SAMSUNG (726-7864) for Globe
02-5805777
1800-SAMSUNG (726-7864)
0800-329-999
0266-026-066
1800-29-3232
02-689-3232
1 800 588 889 http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
MIDDlE EAST
8000-4726
08000-726786
021-8255
800-22273
065777444
183-2255 http://www.samsung.com/ae
(English) http://www.samsung.com/ae_ar
(Arabic) http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com/ae
(English) http://www.samsung.com/ae_ar
(Arabic)
Appendix
88
Appendix
MOROCCO
OMAN
SAUDI ARABIA
TURKEY
U.A.E
ANGOLA
BOTSWANA
CAMEROON
COTE D’ IVOIRE
GHANA
KENYA
NAMIBIA
NIGERIA
SENEGAL
SOUTH AFRICA
TANZANIA
UGANDA
ZAMBIA
MIDDlE EAST
080 100 2255
800-SAMSUNG (726-7864)
9200-21230 http://www.samsung.com
http://www.samsung.com/ae
(English) http://www.samsung.com/ae_ar
(Arabic) http://www.samsung.com/ae
(English) http://www.samsung.com/ae_ar
(Arabic) http://www.samsung.com
http://www.samsung.com
444 77 11
800-SAMSUNG (726-7864)
AFRICA
91-726-7864
0800-726-000
7095- 0077
8000 0077
0800-10077
0302-200077
0800 724 000
8197267864
0800-726-7864
800-00-0077
0860-SAMSUNG (726-7864)
0685 88 99 00
0800 300 300
211350370 http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
Appendix
89
Appendix
Correct Disposal
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal.
Appendix
90
Appendix
Terminology
OSD(On Screen Display)
On screen display (OSD) allows you to configure on-screen settings to optimize the picture quality as required. It allows you to change the screen brightness, tint, size and many other settings using menus displayed on the screen.
Gamma
The Gamma menu adjusts the grey scale that represents middle tones on the screen. Adjusting the brightness brightens the whole screen, but adjusting Gamma only brightens the medium brightness.
Grey scale
Scale refers to levels of color intensity that show variations of color change from darker areas to brighter areas on the screen. Changes to the screen brightness are expressed with black and white variation, and grey scale refers to the medium area between black and white. Changing the grey scale through Gamma adjustment will change the medium brightness on the screen.
Scanning rate
Scanning rate, or refresh rate, refers to the frequency of screen refreshes. Screen data is transmitted as it refreshes to display an image, although the refreshing is invisible to the naked eye. The number of screen refreshes is called scanning rate and is measured in Hz. A scanning rate of 60Hz means that the screen refreshes 60 times per second. The screen scanning rate depends on the performance of the graphics cards in your PC and monitor.
Horizontal Frequency
Characters or images displayed on the monitor screen consist of numerous dots (pixels). Pixels are transmitted in horizontal lines, which are then arranged vertically to create an image. The horizontal frequency is measured in kHz and represents how many times horizontal lines per second are transmitted and displayed on the monitor screen. A horizontal frequency of 85 means that the horizontal lines that make up an image are transmitted 85 000 times per second, and the horizontal frequency is indicated in 85kHz.
Vertical Frequency
One image is made of numerous horizontal lines. The vertical frequency is measured in Hz and represents how many images can be created per second by those horizontal lines. A vertical frequency of 60 means that an image is transmitted 60 times per second. The vertical frequency is also called "refresh rate" and affects screen flicker.
Appendix
91
Appendix
Resolution
Resolution is the number of horizontal pixels and vertical pixels that form a screen. It represents the level of display detail.
A higher resolution displays a greater amount of information on the screen and is suitable for performing multiple tasks at the same time.
E.g. A resolution of 1920 x 1080 consists of 1,920 horizontal pixels (horizontal frequency) and 1,080 vertical lines (vertical resolution).
Plug & Play
The Plug & Play feature allows the automatic exchange of information between a monitor and PC to produce an optimum display environment.
The monitor uses VESA DDC (international standard) to execute Plug & Play.
MHL (Mobile High-Definition Link)
This feature allows you to enjoy videos and photos (imported from a connected mobile device that supports MHL ) on the screen of the product.
Appendix
92
Index
Symbols
"MHL" (Mobile High-Definition Link)
A
B
C
Configuring Brightness and Contrast in the
Initial Screen (S24B750H / S27B750H)
Configuring Volume in the Initial Screen
Correct posture to use the product
Customized Key (S24B750H / S27B750H)
D
E
F
G
H
I
K
L
M
Menu H-Position & Menu V-Position
O
P
Index
93
Index
Q
R
Requirements Before Contacting Samsung
S
U
Index
94

Public link updated
The public link to your chat has been updated.
Advertisement
Key features
- 68.6 cm (27") LED TN+Film
- Full HD 1920 x 1080 pixels 16:9
- 2 ms 300 cd/m² 1000:1
- 42 W