INTEK MT-3030 Owner's manual

Add to my manuals
32 Pages

advertisement

INTEK MT-3030 Owner's manual | Manualzz

MT-3030

MULTISTANDARD

UHF HANHDELD TRANSCEIVER

(PMR446 / LPD433 BANDS)

OWNER'S MANUAL

MANUALE DI

ISTRUZIONI

Index

Index........................................................................................................................................................... 1

Introduction ........................................................................................................................................... 2-3

Contents of Package ............................................................................................................................... 3

Battery Operation .................................................................................................................................. 3-4

Belt Clip ..................................................................................................................................................... 4

Controls and Indicators ........................................................................................................................ 5-7

Operation .............................................................................................................................................. 8-11

Specifications.......................................................................................................................................... 12

Optional Accessories ............................................................................................................................. 12

Important Informations........................................................................................................................... 13

Declaration of Conformity...................................................................................................................... 14

User Information ..................................................................................................................................... 14

Notes........................................................................................................................................................ 30

IMPORTANT !

It is recommended to carefully read this instruction manual throughout, before using the radios. This also in order to prevent you from using the radios out of the limits stated by the regulations.

IMPORTANT !

The maximum operating range will vary depending on terrain and environment. Range will be usually greater in open fields.

While range is usually shorter within and around buildings or large structures. This unit may not ensure privacy of communication.

- 1 -

RoHS

2002/95/EC

Introduction

Congratulations !

Congratulations on your selection and purchase of this high quality product. With proper care and adherence to the set-up and user instructions in this Owner’s Manual, this unit will let you enjoy years of trouble-free service.

We are committed to providing quality products that fit your needs, however we would like to receive any comments or suggestions that you might have on this product, which will help us in continuous improvement of the quality.

Applications

The MT-3030 is a compact design two-way communication device, operating on the PMR 446 MHz and on the LPD

433 MHz European bands. Radio must be operated on the band (PMR446 or LPD433) and on the channels

allowed in the country where the product is been used, in accordance with the local regulations. It can be used to provide immediate, high quality, cost free 2-way communication, for both business or personal use, it is the ideal communication tool for many applications, like :

Industry

Construction Sites

Shops, Stores & Shopping Malls

Warehouses & Buildings

Hotels & Resorts

Safety & Emergency

Baby Monitor

Sport & Leisure

Sporting Events, Concerts, Meetings

Bike & Motorcycle Riding

Kids and old personsControl

Camping and Hiking

Indoor & Outdoor Activities

Sailing and Sports Flight

Features and Benefits

The radio includes a number of advanced features, nevertheless its operation is user firendly and you may get familiar with it, after few minutes of use.

Please refer to the following list of the main feautres in this two-way radio :

8 PMR Channels + 69 LPD Channels

38 CTCSS Codes

Roger Beep Tone

Keypad Program Tone

Keypad Lock

Up to 10 km range on PMR446 channels, depending on the environment

Auto Squelch

Auto Monitor

Auto Power Save Circuit

VOX (Baby Room Monitor) / Handsfree Use

Dual Watch function

Adjustable Hi-LO Transmitter Power (PMR band)

Channel Scan

- 2 -

Introduction - Contents of Package - Battery Operation

Channel / CTCSS Tone Memory

3 Selectable Call Tone Melodies

Bi-color LED Transmit and Reception Indicator

Back Lighted LCD Display

Battery Status

External Earset-Microphone Jack

Wall Charger Jack

Contents of Package

Please carefully check that the package contains the following items :

2 x Main Unit (Radio with Antenna)

2 x Ni-MH Battery Pack

2 x 230VAC Wall Charger

2 x Belt Clip

2 x Earset-Microphone

1 x User Manual (this one)

BATTERY OPERATION

Installing and Checking Batteries

The radio can be powered by no. 4 pcs AAA type alkaline batteries or by the supplied Ni-MH battery pack. Is better to remove the clip from the belt for an easy removal or installation of battery. To install the battery please refer to the following procedure :

1.

Release the Cabinet Cover of the battery room by sliding it down.

2. Install no. 4 pcs AAA type batteries or the Ni-MH battery pack into the Battery Compartment. Be certain to respect the correct polarity in the compartment. Installing the batteries incorrectly will prevent the unit from operating.

3. Re-install the Cabinet Cover by sliding it up.

When the battery capacity is low, the Low Battery Level Icon (E) appears on the LCD Display (4). You should recharge the battery at that time. The Low Battery Level icon (E) will not appear on the display unless the unit detects that the battery is low. When the battery capacity is low, the Battery Level Icon will blink and (in PMR Band only) the transmitter will be automatically switched in Low Power Mode. Transmitter will work until battery is empty. Recharge or replace the batteries at this time. Please refer tothe following item BATTERY CHARGING.

Battery Charging

When the battery capacity is low, switch OFF the radio and connect the supplied battery travel to the CHG jack (2), then plug it into the 230VAC outlet. To obtain the maximum performance from the batteries, recharge them only when they are fully discharged. The charging time depends on the capacity of the used batteries, it is approximately 12 hours for one set of Ni-MH batteries (600-800mAh). When the charging time has expired, unplug the charger from the AC outlet and then disconnect it from the radio.

- 3 -

Battery Operation

BATTERY

COMPARTMENT

+ -

BATTERY

COMPARTMENT

COVER

RECHARGEABLE

BATTERY PACK

DESK CHARGER CONTACTS

WARNING !

1. Use only the battery indicated in this manual or the supplied Ni-MH Battery Pack.

2. Do never try to recharge alkaline batteries, as this might cause damage to the radio or explosion of the batteries.

3. Always switch OFF radio before starting the battery charging process.

4. Do not recharge batteries for more than 12-14 hours, in order to avoid overcharge or overheating, which could cause damage to the radio.

5. Use only the enclosed battery charger or original INTEK battery chargers.

Belt Clip

1. To install the belt clip, slide it down into the special slot situated in the rear side of the unit, until the block system make a click.

2. To remove the clip, pull the block tab toward exterior and slide the clip toward the up side of the unit.

BELT CLIP

LOCK TAB

BELT CLIP

LATCH

- 4 -

Controls and Indicators

Front Panel

1

13

12

11

10

1.

Antenna

High efficency rubber antenna.

2.

Earset-Microphone-Charge Jack

Connect an external earset-microphone to this jack. Connect the supplied 230VAC battery travel charger to this jack.

WARNING !

Use only original accessories. Connecting and using accessories other than the original ones, may cause serious damage to the radio and will void the warranty.

Always set the volume to minimum before connecting an external earset, in order to avoid damaging the earset or the user’s ear.

- 5 -

2

3

4

5

6

7

8

9

Controls and Indicators

3.

TX/RX LED indicator

This green-red dual color LED Indicator lights up in green color when radio is in receive mode and in red color when radio is in transmit mode.

4.

LCD Display

LCD display with green color backlight function for best readability in darkness. The 4-line LCD indicates simultaneously all the programmed settings and all the enabled functions.

LCD Display

A B C D

M

E

F

G

L I H

A.

VOX Icon

The VOX Icon (A) is lighted when the VOX (handsfree use) function is enabled.

B.

SCAN Icon

The SCAN icon (B) is lighted when the SCAN function has been enabled, in order to automatically search busy channels.

C.

DW Icon

The DW icon (C) is lighted when the DW (DUAL WATCH) function has been enabled, in order to automatically monitor two different channels.

D.

Roger Beep Icon

The Roger Beep Icon (D) is lighted when the Roger Beep function is enabled.

E.

Low Battery Level Indicator

It shows when battery level is low.

F.

LOW Icon

The LOW icon (F) is lighted when the trasmitter is in the LOW POWER mode (PMR channels only).

G.

HI Icon

The HI icon (G) is lighted when the trasmitter is in the HIGH POWER mode (PMR channels only).

- 6 -

Controls and Indicators

H.

CTCSS Code Number

It shows the selected CTCSS Code Number.

I.

Keypad Program Tone Icon

The Keypad Program Tone Icon (I) is lighted when the keyboard tone function is enabled.

L.

Channel Number

It shows the selected channel, from P1 to P8 (PMR channels) and from 01 to 69 (LPD channels).

M.

LOCK Icon

The LOCK (M) icon is lighted when the keypad lock function has been enabled.

5.

Built-in Microphone

Built-in microphone.

6.

CALL Key

Press the CALL (6) key to transmit a musical Call Alert Tone. In the MENU MODE press this key to confirm the function selection.

7.

ON-OFF / MENU Key

Press and hold this key to switch ON/OFF the radio. Shortly press the MENU (7) key to enable and program the various functions of the radio. Pressing the MENU (7) key will scroll the various functions.

8.

UP Key

The UP (8) key is used to increase the volume level (from level 1 to level 8) and toggle setting in Menu mode.

9.

DOWN Key

The DOWN (9) key is used to decrease the volume level (from level 8 to level 1) and toggle setting in Menu mode.

10.

Built-in Speaker

Built-in front speaker.

11.

MON Key

Press the MON key (11) to activate the Monitor function. This function opens Squelch in order to listen to the background noise and weak signals.

12.

SCAN / LOCK Key

SCAN

Shortly press the SCAN (12) key to start the channels scanning (refer to AUTOMATIC CHANNEL SCANNING at page

11).

KEYPAD LOCK

Press and hold the SCAN (12) key for about 3 seconds to enable the keypad LOCK function. Press and hold this key again to disable the keypad LOCK function (refer to KEYPAD LOCK at page 11).

13.

PTT (Push-To-Talk) Key

Press the PTT (13) key to transmit and hold it during transmission. The TX/RX LED Indicator (3) will be lighted in red color during transmission. Release the PTT (13) key at the end of your transmission to return to the receive mode.

WARNING ! Do not touch the antenna during transmission.

- 7 -

Operation

MENU OPERATION

Channel Selection

The radio has 8 PMR channels (P1-P8) + 69 LPD channels (01-69). To choose the desired channel, please proceed as follows :

1. Press the MENU (7) key until the channel number (L) blinks on the LCD display.

2. Press the UP (8) or DOWN (9) keys to select the desired channel. Pressing and holding the UP (8) or DOWN (9) keys, the channel selection will move quicker.

3. To confirm the selection and exit the Menu Mode, press PTT key (13) or the CALL (6) key or press the MENU (7) key to move to the next function.

PMR Channels

FREQ.

CH

446.00625

P1

446.01875

P2

FREQ.

CH

446.03125

P3

446.04375

P4

FREQ.

CH

446.05625

P5

446.06875

P6

FREQ.

CH

446.08125

P7

446.09375

P8

LPD Channels

FREQ.

CH

433.07500

433.10000

433.12500

433.15000

433.17500

433.20000

433.22500

433.25000

433.27500

433.30000

10

433.32500

11

7

8

9

1

2

3

4

5

6

433.35000

12

433.37500

13

433.40000

14

433.42500

15

433.45000

16

433.47500

17

433.50000

18

FREQ.

CH

433.52500

19

433.55000

20

433.57500

21

433.60000

22

433.62500

23

433.65000

24

433.67500

25

433.70000

26

433.72500

27

433.75000

28

433.77500

29

433.80000

30

433.82500

31

433.85000

32

433.87500

33

433.90000

34

433.92500

35

433.95000

36

FREQ.

CH

433.97500

37

434.00000

38

434.02500

39

434.05000

40

434.07500

41

434.10000

42

434.12500

43

434.15000

44

434.17500

45

434.20000

46

434.22500

47

434.25000

48

434.27500

49

434.30000

50

434.32500

51

434.35000

52

434.37500

53

434.40000

54

FREQ.

CH

434.42500

55

434.45000

56

434.47500

57

434.50000

58

434.52500

59

434.55000

60

434.57500

61

434.60000

62

434.62500

63

434.65000

64

434.67500

65

434.70000

66

434.72500

67

434.75000

68

434.77500

69

-

-

-

-

-

-

CTCSS Code Selection

The radio has 38 CTCSS private codes available. Different CTCSS tones may be associated to different channels. To choose the desired CTCSS code, please proceed as follows :

1. Press the MENU (7) key several times, until the CTCSS code number (H) blinks on the LCD display. The CTCSS code OF (H) indicates that no CTCSS tone is programmed on that channel.

2. Press the UP (8) or DOWN (9) keys to select the desired CTCSS code number. Pressing and holding the UP (8) or DOWN (9) keys, the selection will move quicker.

- 8 -

Operation

3.

To confirm the selection and exit the Menu Mode, press PTT key (13) or the CALL (6) key or press the MENU (7) key to move to the next function.

Selecting a CTCSS code of OF will disable the CTCSS feature. To communicate between two or more radios, both the channel and CTCSS code selections must be the same. To communicate with other models and brands of radios, the actual radio frequency and CTCSS frequency must be matched. The frequency chart and CTCSS Code chart are included to help with this selection.

No Freq. (Hz)

OF CTCSS OFF

01

02

67,0

71,9

03

04

05

06

07

74,4

77,0

79,7

82,5

85,4

CTCSS - TONE FREQUENCY CHART

No Freq. (Hz)

08 88,5

09 91,5

10 94,8

11

12

13

14

15

97,4

100,0

103,5

107,2

110,9

No Freq. (Hz)

16

17

18

114,8

118,8

123,0

19 127,3

20 131,8

21

22

23

136,5

141,3

146,2

No Freq. (Hz)

24

25

26

151,4

156,7

162,2

27 167,9

28 173,8

29

30

31

179,9

186,2

192,8

No Freq. (Hz)

32

33

34

35

36

37

38

-

203,5

210,7

218,1

225,7

233,6

241,8

250,3

-

VOX (Handsfree use) Function

Your radio is equipped with a user selectable Voice Operated Transmitter function (VOX), that is used for automatic voice transmission (handsfree use or baby room monitor use). In this mode, transmission is automatically initiated by speaking into the microphone (5) and there is no need to push the PTT (13). To enable the VOX function, please proceed as follows :

1. Press the MENU (7) key several times, until the VOX icon (A) blinks on the LCD display (4).

2. Press the UP (8) or DOWN (9) keys to select the desired level of sensitivity (level 1 or level 2) or to disactivate the VOX (OF). The VOX level 2 indicates the highest VOX sensitivity. When VOX feature is on, the VOX icon (A) will appear on the LCD display.

3.

To confirm the selection and exit the Menu Mode, press PTT key (13) or the CALL (6) key or press the MENU (7) key to move to the next function.

Transmitter RF Power Setting

Your radio has a HI/LOW Power selection function to set the TX Power for PMR Band. This function is very convenient to reduce the current drain and extend battery life when communicating within short distance. To select the output power on the PMR Band :

1. Press the MENU (7) key several times, until the Pr (H) indication blinks on the LCD display (4).

2. Press the UP (8) or DOWN (9) keys to select the desired power level, HI (high power) or LOW (low power).

On the LCD display will appear the HI (G) icon or LOW (F) icon.

3. To confirm the selection and exit the Menu Mode, press PTT key (13) or the CALL (6) key or press the MENU (7) key to move to the next function.

Note : this function is available only on the 8 PMR channels.

- 9 -

Operation

Keypad Program Tone Setting

When a key is pressed, a beep tone is heard to confirm your command. The user may enable or disable this keypad program tone.

1. Press the MENU (7) key several times, until the keypad tone icon (I) will blink on the LCD display (4).

2. Press the UP (8) or DOWN (9) keys to set the desired selection on (keypad tone enabled) or oF (keypad tone disabled).

3. To confirm the selection and exit the Menu Mode, press PTT key (13) or the CALL (6) key or press the MENU (7) key to move to the next function.

4.

When the Keypad tone is enabled, the Keypad tone icon (I) appears on the LCD display.

Roger Beep Tone Setting

The radio is equipped with a user selectable Roger Beep Tone feature, which enables you to send a Beep Tone at the end of each transmission after every release of the PTT (13) key. This will prompt any receiving unit that your transmission has ended. To enable or disable this function, please proceed as follows :

1. Press the MENU (7) key several times, until the Roger Beep tone icon (D) will blink on the LCD display (4).

2. Press the UP (8) or DOWN (9) keys to set the desired selection on (Roger Beep tone enabled) or oF (Roger

Beep tone disabled).

3. To confirm the selection and exit the Menu Mode, press PTT key (13) or the CALL (6) key or press the MENU (7) key to move to the next function.

4.

When the Roger Beep tone is enabled, the tone icon (D) appears on the LCD display.

Call Tone Setting

The radio is equipped with 3 user selectable Call tone melodies. To set the desired Call tone melody, please proceed as follows :

1. Press the MENU (7) key several times, until the CA (L) indication and melody number (H) will blink on the LCD display (4).

2. Press the UP (8) or DOWN (9) keys to set the desired melody (01-02-03).

3. To confirm the selection and exit the Menu Mode, press PTT key (13) or the CALL (6) key or press the MENU (7) key to move to the next function.

4.

Press the CALL key (6) to transmit the Call Tone Melody.

Dual Watch Setting

The radio is equipped with a Dual Watch function that allows to monitor 2 differents channels / CTCSS codes combinations. To set the Dual Watch function, please proceed as follows :

1.

Select the first channel to be monitored.

2. Press the MENU (7) key several time until the oF (L) icon (function disabled) and the DW (C) icon will blink on the LCD display (4).

3. Press the UP (8) or DOWN (9) keys to select the second channel to be monitored between the 8 PMR and the

69 LPD available channels.

4. Press PTT (13) or CALL (6) keys to confirm the selection and use the UP (8) or DOWN (9) keys to select the desired CTCSS code number between the 38 available codes. Selecting the CTCSS code 0F will disable the

CTCSS feature.

- 10 -

Operation

4. To confirm the selection and exit the Menu Mode, press PTT key (13) or the CALL (6).

5.

When the Dual watch function is enabled, the DW icon (C) appears on the LCD display and the radio will start monitoring and will stop when a signal is received on one of the two stored channels. The scan will re-start at the end of transmission.

6. To disable the Dual Watch function, press the SCAN (12) key or the MENU (7) key.

Automatic Channel Scanning

This function allows automatic scanning of all channels and programmed memories. To start the automatic scan function proceed as follows :

1. Shortly press the SCAN (12) key; the unit will automatically start the automatic channels scanning and the SCAN

(B) icon will appear on the LCD display.

SCAN will automatically stop when a signal is detected on one channel, in order to listen to the communication and

SCAN will re-start when no more signal is detected on that channel after about 4 seconds. If you press the PTT key

(13) during the SCAN operation, SCAN will stop automatically and radio will set the last used channel. SCAN will then restart after about 14 seconds if no signals are received on that channel. If a signal with a CTCSS code is received, the radio shows that channel with the corresponding code. If the receiving code is different from the preprogrammed, the radio won’t correspond with that correspondent.

2.

Press the SCAN (12) key to exit the SCAN mode.

Keypad Lock

To avoid entering unwanted command, press and hold the SCAN/LOCK (12) key for about 2 seconds . The LOCK

(M) icon will appear on the LCD display (4). When the Keylocl function is enabled, the UP (8), DOWN (9), SCAN (12) and MENU (7) keys will be disabled. When the keypad is locked, you will still be able to turn the radio OFF and ON, monitor, transmit/receive, and send a Call tone. To unlock the Keypad, press again the SCAN/LOCK (12) key for about 2 seconds.

Auto Squelch

Your radio is equipped with an automatic Squelch system that automatically cuts off weak transmissions and unwanted noise due to terrain conditions and range limitations. By pressing the MON (11) key, the Squelch function will be disabled and you will hear the background noise or any weak signal. To resume the automatic Squelch, just press the MON (11) key again.

Automatic Power Save Setting

The radio has a unique Automatic Power Save circuit designed to dramatically extend battery life. If it senses no transmission within 5 seconds, it automatically switches to the Power Save mode. The Radio can still receive transmissions in this mode.

- 11 -

Specifications - Optional Accessories

SPECIFICATIONS

Channels

Operating Frequency

Power Source

Output Power

Dimensions

Weight

8 PMR Channels + 69 LPD Channels with 38 CTCSS Codes

UHF 446.00625 - 446.09375 MHz (PMR Band)

UHF 433.07500 - 434.77500 MHz (LPD Band)

6.0V (4 x AAA 1,5V alkaline battery)

4.8V (4 x AAA 1,2V Ni-MH rechargeable battery)

4.8V (Rechargeable Battery Pack)

0.5W ERP High / 0.05W ERP Low (PMR BAND)

0.01W ERP maximum (LPD Band)

H170 x L55 X D40 mm (including antenna) gr. 142 (including battery)

Damaged Antenna

Do not use any radio that has a damaged Antenna. If a damaged antenna comes in contact with the skin, a minor burn may occur.

Battery Operation - Important Information

Dispose of battery in the proper manner, according to federal, state and local regulations that apply in your area. A battery may leak electrolyte if it is mixed in a set with different battery types, if inserted incorrectly, if disposed of in fire, or if an attempt is made to charge a battery not intended to be charged. Discard leaky batteries immediately.

Leaking batteries can cause skin burns or other personal injury.

OPTIONAL ACCESSORIES

MT-SM100

MT-SM200

SM-007-A1

External Earset-Microphone with Tie Clip

External Earset- Flexible Boom Microphone with Tie Clip

External Transparent Earset-Microphone for Security use.

HS-2PIN-S/INT Motorcycle Set (for Integral Helmet)

HS-2PIN-S/JET Motorcycle Set (for Jet Helmet)

DDC-800 230VAC Electronic Quick Desk Charger

- 12 -

Important Informations

Important Informations

Important !

Changes or modifications to this product could void your authority to operate this unit. Your radio is produced and factory set to transmit a regulated signal on an assigned frequency. It is against the law to alter or adjust the settings inside the radio to exceed those limitations. Any adjustment to your radio must be made by a qualified authorized technician or service.

To be safe and sure :

Never open the cabinet of your radio.

Never change or replace anything in your radio (except the battery).

Your radio might cause TV or radio interference even when it is operating properly. To determine whether your radio is causing the interference, turn it off. If the interference goes away, your radio is causing it. Try to eliminate the interference by moving your radio away from the receiver. If you cannot eliminate the interference, stop using the radio.

Hazardous Environments :

Do not operate the radio in hazardous environments.

Care and Safety :

To clean the radio, use a soft cloth dampened with water. Do not use cleaners or solvents because they can harm the body of the unit and leak inside, causing permanent damage. Use a dry, lint-free cloth to clean the battery contacts.

Do not submerge the unit in water or use it on a wet environment. If the unit gets wet, turn it off and remove the battery immediately. Dry the battery and the battery compartment with a soft cloth to minimize potential water damage. Leave the battery compartment cover off overnight to ensure complete drying. Do not use the radio until it is completely dry.

Notice ! Use of Multi-Standard Transceivers

This transceiver is a Multi-Standard (DUAL BAND) device and it may be used in all the European countries and in some other countries as well, but only on the channels (frequencies) allowed by the local regulations in each country.

PMR446 (8 channels) : Austria, Belgium, Czech Rep., Denmark, Finland, France, Germany, Greece, Island,

Irland, Italy, Luxembourg, Norway, Holland, Poland, Portugal, Spain, Sweden, Switzerland, UK, Turkey

LPD433 (69 channels) : Austria, France, Germany, Greece, Norway, Holland, Russia, Sweden

- 13 -

Declaration of Conformity - User Information

EC Certificate of Conformity

(to EC Directive 99/5-89/336-93/68-73/23)

DECLARATION OF CONFORMITY

With the present declaration, we certify that the following products :

INTEK MT-3030D comply with all the technical regulations applicable to the above mentioned products in accordance with the EC Directives 73/23/EEC, 89/336/EEC and 99/5/EC.

Type of product :

Details of applied standards :

Manufacturer :

Contact Reference :

LPD / PMR 446 Transceiver

EN 300 220-1-2-3, EN 301 489-1-3, EN 60065

EN 300 296-2, EN 301 489-5, EN 60065

INTEK S.R.L.

16 Via G. Marconi

20090 Segrate (Mi)

Tel. 02-26950451 / Fax 02-26952185

E-Mail [email protected]

Armando Zanni

Tel. 02-26950451 / Fax 02-26952185

E-Mail [email protected]

Segrate, 11/01/2008 dr. Vittorio Zanetti (General Manager)

User Information

in accordance with art. 13 of the Legislative Decree of 25th July 2005, no. 15 ”Implementation of Directives 2002/95/EC,

2002/96/EC and 2003/108/EC, relative to reduction of the use of hazardous substances in electrical and electronic equipment, in addition to waste disposal”.

The crossed bin symbol shown on the equipment indicates that at the end of its working life the product must be collected separately from other waste.

The user must therefore take the above equipment to the appropriate differentiated collection centres for electronic and electro technical waste, or return it to the dealer when purchasing a new appliance of equivalent type, in a ratio of one to one.

Appropriate differentiated waste collection for subsequent recycling, treatment and environment-friendly disposal of the discarded equipment helps to prevent possible negative environmental and health effects and encourages recycling of the component materials of the equipment.

Illegal disposal of the product by the user will be punished by application of the administrative fines provided for by the legislative decree no. 22/1997 (article 50 and following of the legislative decree no. 22/1997).

- 14 -

Indice

Indice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Introduzione . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-17

Contenuto della Confezione . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Utilizzo delle batterie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-18

Clip da cintura . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Descrizione dei comandi e indicatori . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19-21

Funzionamento . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22-25

Specifiche Tecniche . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Accessori Opzionali . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Altre Informazioni . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Avvertenze Importanti . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Avviso agli utenti . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Garanzia Limitata . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Dichiarazione di Conformità . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Note.......................................................................................................................................................... 30

IMPORTANTE !

Si consiglia vivamente di prendere visione del contenuto di questo manuale, prima di utilizzare la ricetrasmittente. Questo anche per evitare di utilizzare gli apparecchi al di fuori dei limiti previsti dalle norme di legge in vigore.

IMPORTANTE !

La massima portata operativa è variabile secondo le condizioni del terreno e ambientali. La portata è normalmente maggiore negli spazi aperti, mentre diminuisce sensibilmente all’ interno o intorno agli edifici o altre strutture. Questa ricetrasmittente può non garantire la segretezza delle comunicazioni.

- 15 -

RoHS

2002/95/EC

Introduzione

Congratulazioni !

Congratulazioni per aver scelto ed acquistato un prodotto di qualità INTEK. Con un uso corretto e seguendo il set-up e le istruzioni d’ uso in questo Manuale di Istruzioni, questo apparecchio vi garantirà un servizio senza problemi per molti anni.

Ci impegnamo costantemente a fornire prodotti di qualità che rispondano alle vostre esigenze, ma siamo comunque sempre molto interessati a ricevere eventuali vostri commenti o suggerimenti su questo prodotto, che ci aiutino nel continuo miglioramento della qualità.

Applicazioni

INTEK MT-3030 è una ricetrasmittente personale di ultima generazione, leggera e compatta, che opera nella banda europea PMR 446 MHz e LPD 433 MHz. La radio deve operare nelle bande (PMR446 o LPD433) e nei canali

ammessi nel paese dove il prodotto viene utilizzato, in accordo con le restrizioni locali. Questo apparecchio permette una comunicazione via radio immediata, di alta qualità, sia per l’ uso professionale che personale, è uno strumento di comunicazione ideale per molteplici usi, quali :

Commercio

Industria

Cantieri Edili

Negozi, Magazzini & Centri Commerciali

Capannoni, Uffici & Palazzi

Hotels & Resorts

Sicurezza & Soccorso

Controllo Bambini

Sport & Tempo Libero

Eventi Sportivi, Concerti, Meetings

Uso in Bicicletta o Motocicletta

Monitoraggio Anziani o Neonati

Campeggio e Escursioni

Attività Indoor & Outdoo r

Nautica e Volo Sportivo

Caratteristiche Principali

Questo apparecchio comprende numerose funzioni avanzate, ciò nonostante l’ utilizzo è molto semplice e potete prendere familiarità con la radio dopo pochi minuti di uso.

Per favore riferitevi alla lista seguente delle principali funzioni incorporate :

8 Canali PMR + 69 Canali LPD

38 Codici Privati CTCSS

Tono Roger Beep

Tono di Inserimento Comandi

Blocco della Tastiera

Portata fino a 10 km nei canali PMR446, secondo le condizioni ambientali

Auto Squelch

Monitor

Circuito automatico Power Save

Sistema VOX (Baby Room Monitor) / Uso Mani Libere

Funzione Dual Watch

- 16 -

Introduzione - Contenuto della Confezione - Utilizzo delle Batterie

Potenza del Trasmettitore Regolabile Hi-LO (in banda PMR)

Scansione automatica dei Canali

Memoria delle Combinazioni Canale / CTCSS

3 Diversi Toni Musicali di Chiamata

Indicatore LED bi-colore di trasmissione e ricezione

Display LCD retroilluminato

Indicatore di Livello Batteria

Presa per Microfono Auricolare Esterno / Ricarica

Contenuto della confezione

Per favore controllate che la confezione contenga tutti i seguenti componenti :

2 x Unità Principale (Ricetrasmittente)

2 x Pacco batterie ricaricabile Ni-MH

2 x Caricabatterie da parete 230VAC

2 x Clip da cintura

2 x Auricolare-microfono

1 x Manuale d’ Istruzioni

UTILIZZO DELLE BATTERIE

Installazione e controllo delle batterie

La radio è alimentata tramite n. 4 pile alkaline tipo AAA o tramite il pacco batterie ricaricabile Ni-MH in dotazione. E' conveniente sfilare la clip da cintura per una facile rimozione o installazione delle batterie.

Per installare le batterie, procedere come segue :

1. Rimuovere il coperchio del vano batterie facendolo slittare verso il basso.

2. Inserire n. 4 batterie tipo AAA o il pacco batterie Ni-MH nell' alloggiamento. Assicurarsi di rispettare la corretta polarità, in caso contrario la radio potrebbe essere danneggiata.

3. Riposizionate il coperchio del vano batterie facendolo slittare verso l' alto.

Quando lo stato di carica delle batteria è insufficiente, il simbolo di batteria scarica (E) appare sul display LCD . E' necessario a questo punto procedere alla ricarica. Il simbolo (E) non apparirà sul display se la batteria non ha un basso livello di carica. Quando la batteria è insufficiente, l' indicatore di livello batteria (E) lampeggia sul display e nella banda PMR il trasmettitore passerà automaticamente in modalità Low Power (bassa potenza) e funzionerà fino all' esaurimento della stessa. Ricaricare o sostituire a questo punto le batterie. Per il corretto procedimento, fare riferimento al paragrafo successivo.

Ricarica batterie

Quando la carica delle batterie è insufficente, spegnere il ricetrasmettitore e collegare il caricabatterie da parete in dotazione alla presa di ricarica CHG (2) e successivamente alla presa di corrente 230VAC. Per ottenere il massimo rendimento, le batterie dovrebbero essere ricaricate solo se completamente scariche. Il tempo di carica dipende dalla capacità delle batterie utilizzate; il tempo di carica normale, per un set di batterie al Ni-MH (600-800mAh) é di circa 12 ore. A processo di ricarica ultimato, estrarre il caricabatterie dalla presa di corrente e successivamente scollegarlo dalla radio.

- 17 -

Utilizzo delle batterie

VANO

BATTERIE

+ -

COPERCHIO

VANO

BATTERIE

PACCO BATTERIE

RICARICABILE

CONTATTI PER CARICABATTERIE

DA TAVOLO

AVVERTENZE !

1. Utilizzare solamente le batterie indicate nel manuale o il pacco batterie Ni-MH in dotazione.

2. Non tentare mai di ricaricare le batterie alkaline, al fine di evitare danni alla radio o l' esplosione delle stesse.

3. Spegnere sempre il ricetrasmettitore prima di iniziare il processo di ricarica.

4. Non ricaricare mai le batterie per più di 12-14 ore, per evitare la sovraccarica o il surriscaldamento delle stesse, con conseguenti danni alla radio.

5. Utilizzare solo il caricabatterie in dotazione con il prodotto o i carica batterie originali INTEK.

LINGUETTA

DI BLOCCO

Clip da cintura

1. Per installare la clip da cintura, far slittare la stessa verso il basso nello slot apposito situato nella parte posteriore della radio, finchè il meccanismo di blocco compie un clic.

2. Per rimuovere la clip, tirare la linguetta di blocco verso l' esterno e quindi delicatamente far slittare la clip verso la parte alta della radio.

SUPPORTO

CLIP

- 18 -

Pannello frontale

Descrizione dei comandi e indicatori

1

13

12

11

2

3

4

5

6

7

8

9

10

1.

Antenna

Antenna in gomma, ad alto rendimento.

2.

Presa Mike-Speaker / ricarica

Presa per il collegamento di un microfono-altoparlante esterno e del carica batterie da parete 230VAC in dotazione.

AVVERTENZA ! Usare solo accessori originali. Collegare ed utilizzare accessori diversi da quelli originali può causare gravi danni al ricetrasmettitore ed inoltre la perdita della garanzia.

Ridurre sempre il livello di volume al minimo prima di collegare una cuffia o microfono esterni e aumentarlo gradatamente per evitare di danneggiare l'accessorio o l' udito dell' operatore.

- 19 -

Descrizione dei comandi e indicatori

3.

Indicatore LED TX/RX

Questo indicatore LED luminoso bi-colore rosso-verde è acceso in colore verde quando il ricetrasmettitore è in modalità ricezione e in colore rosso quando il ricetrasmettitore è in modalità trasmissione.

4.

Display LCD

Display LCD a 4-linee di tipo retro-illuminato in colore verde, per la massima leggibilità anche nell’oscurità.

Indica simultaneamente tutti i parametri in uso e tutte funzioni e i dispositivi attivati.

Display LCD

A B C D

M

E

F

G

L I H

A.

Icona VOX

L' indicazione VOX (A) indica che la funzione VOX (uso a mani libere) è attiva.

B.

Icona SCAN

L' icona SCAN (B) è accesa quando è attiva la funzione di scansione SCAN, ovvero la ricerca automatica dei canali occupati.

C.

Icona DW

L' indicazione DW (C) è accesa quando è attiva la funzione DUAL WATCH, ovvero il monitoraggio automatico di 2 canali.

D.

Icona Roger Beep

L' icona (D) è accesa quando è abilitato il dispositivo Roger Beep (tono di fine trasmissione).

E.

Icona livello batteria

L' icona (E) indica quando il livello della batteria è basso.

F.

Icona LOW

L' icona LOW (F) è accesa quando il ricetrasmettitore è in modalità bassa potenza (solo canali PMR).

G.

Icona HI

L' icona HI (G) è accesa quando il ricetrasmettitore è in modalità alta potenza (solo canali PMR).

H.

Indicazione tono CTCSS

Visualizza il numero del codice CTCSS selezionato.

- 20 -

Descrizione dei comandi e indicatori

I.

Icona tono di tastiera

L' icona (I) è accesa quando la funzione tono di tastiera è attiva.

L.

Indicazione del canale

L' indicazione consente la lettura del numero del canale in uso, da P1 a P8 (canali PMR) e da 01 a 69 (canali LPD).

M.

Icona LOCK

L' indicazione LOCK (M) è accesa quando la funzione di blocco tastiera è attiva.

5.

Microfono incorporato

Microfono entro contenuto.

6.

Tasto CALL

Questo tasto consente l' invio del tono di chiamata. Nella modalità MENU permette di confermare la selezione delle funzioni.

7.

Tasto ON-OFF / MENU

Mantenere premuto questo tasto per accendere o spegnere la radio. Premere brevemente il tasto MENU (7) per accedere al menu e abilitare e programmare le diverse funzioni della radio. Ad ogni pressione del tasto MENU (7), è possibile selezionare in sequenza una delle varie funzioni.

8.

Tasto UP

Tasto per la regolazione del livello di volume in ordine crescente (dal livello 1 al livello 8) e lo scorrimento delle funzioni in modalità Menu.

9.

Tasto DOWN

Tasto per la regolazione del livello di volume in ordine decrescente (dal livello 8 al livello 1) e lo scorrimento delle funzioni in modalità Menu.

10.

Altoparlante incorporato

Altoparlante entro contenuto.

11.

Tasto Monitor

Premere questo tasto per attivare la funzione Monitor. Questa funzione consente di aprire lo Squelch e ascoltare così il rumore di fondo.

12.

Tasto SCAN / LOCK

SCAN

Premere brevemente questo tasto per attivare la scansione automatica dei canali (vedi paragrafo SCANSIONE

AUTOMATICA a pag. 25).

BLOCCO TASTIERA KEY LOCK

Mantenere premuto il tasto SCAN (12) per circa 3 secondi per attivare il blocco della tastiera (sul display comparirà l' icona LOCK (M)). Per disattivare il blocco tastiera, mantenere premuto di nuovo il tasto SCAN (12) (vedi paragrafo

BLOCCO DELLA TASTIERA a pag. 25).

13.

Tasto PTT (Push-To-Talk)

Tasto di trasmissione. Premere per trasmettere e mantenere premuto durante la trasmissione. L' indicatore LED (3) rimarrà acceso in colore rosso durante la trasmissione. Rilasciare il tasto PTT (13) per ritornare in modalità ricezione.

ATTENZIONE ! Non toccare l' antenna durante la trasmissione.

- 21 -

Funzionamento

UTILIZZO DEL MENU

Selezione dei canali

La radio dispone di 8 canali PMR (da P1 a P8) + 69 canali LPD (da 01 a 69). Per selezionare il canale desiderato, eseguire le seguenti operazioni :

1. Premere il tasto MENU (7) finchè il numero del canale (L) lampeggia sul display LCD (4).

2. Premere i tasti UP (8) o DOWN (9) per selezionare il canale desiderato. Mantenendo premuto uno di questi tasti, la selezione avverrà con velocità maggiore.

3. Per confermare la selezione eseguita ed uscire dal menu, premere i tasti PTT (13) o CALL (6) oppure premere il tasto

MENU (7) per passate alla funzione successiva.

Canali PMR

FREQ.

CH

446.00625

P1

446.01875

P2

FREQ.

CH

446.03125

P3

446.04375

P4

FREQ.

CH

446.05625

P5

446.06875

P6

FREQ.

CH

446.08125

P7

446.09375

P8

Canali LPD

FREQ.

CH

433.07500

433.10000

433.12500

433.15000

433.17500

433.20000

433.22500

433.25000

433.27500

9

433.30000

10

433.32500

11

6

7

8

3

4

5

1

2

433.35000

12

433.37500

13

433.40000

14

433.42500

15

433.45000

16

433.47500

17

433.50000

18

FREQ.

CH

433.52500

19

433.55000

20

433.57500

21

433.60000

22

433.62500

23

433.65000

24

433.67500

25

433.70000

26

433.72500

27

433.75000

28

433.77500

29

433.80000

30

433.82500

31

433.85000

32

433.87500

33

433.90000

34

433.92500

35

433.95000

36

FREQ.

CH

433.97500

37

434.00000

38

434.02500

39

434.05000

40

434.07500

41

434.10000

42

434.12500

43

434.15000

44

434.17500

45

434.20000

46

434.22500

47

434.25000

48

434.27500

49

434.30000

50

434.32500

51

434.35000

52

434.37500

53

434.40000

54

FREQ.

CH

434.42500

55

434.45000

56

434.47500

57

434.50000

58

434.52500

59

434.55000

60

434.57500

61

434.60000

62

434.62500

63

434.65000

64

434.67500

65

434.70000

66

434.72500

67

434.75000

68

434.77500

69

-

-

-

-

-

-

Selezione del tono CTCSS

La radio dispone di 38 codici privati CTCSS. E’ possibile associare un diverso tono CTCSS a ciascun canale. Per impostare un tono CTCSS, eseguire le seguenti operazioni :

1. Premere più volte il tasto MENU (7) finchè il numero del tono CTCSS (H) lampeggia sul display LCD. Se nessun tono è selezionato verrà visualizzata l' indicazione OF (H).

2. Premere i tasti UP (8) o DOWN (9) per selezionare il tono CTCSS desiderato. Mantenendo premuto uno di questi tasti, la selezione avverrà con velocità maggiore.

3. Per confermare la selezione eseguita ed uscire dal menu, premere i tasti PTT (13) o CALL (6) oppure premere il tasto

- 22 -

Funzionamento

MENU (7) per passate alla funzione successiva.

Note : Selezionando il codice CTCSS OF, la funzione CTCSS sarà disattivata. Per comunicare tra due o più radio, le selezioni del canale e del codice CTCSS devono essere le stesse. Per comunicare con altri modelli e marchi di radio, l’attuale frequenza radio e la frequenza del tono CTCSS devono coincidere. Fate riferimento alle tabelle delle frequenze (canali e toni CTCSS) in questo manuale.

No Freq. (Hz)

OF CTCSS OFF

01

02

67,0

71,9

03

04

05

06

07

74,4

77,0

79,7

82,5

85,4

CTCSS - TABELLA DEI TONI PRIVATI

No Freq. (Hz)

08 88,5

09 91,5

10 94,8

11

12

13

14

15

97,4

100,0

103,5

107,2

110,9

No Freq. (Hz)

16

17

18

114,8

118,8

123,0

19 127,3

20 131,8

21

22

23

136,5

141,3

146,2

No Freq. (Hz)

24

25

26

151,4

156,7

162,2

27 167,9

28 173,8

29

30

31

179,9

186,2

192,8

No Freq. (Hz)

32

33

34

35

36

37

38

-

203,5

210,7

218,1

225,7

233,6

241,8

250,3

-

Impostazione della funzione VOX (uso a mani libere)

La radio dispone della funzione VOX, che può essere utilizzata per una trasmissione di voce automatica (uso a mani libere o uso come baby room monitor). In questa modalità, la trasmissione inizia automaticamente parlando nel microfono (5). Non c’ è bisogno quindi di premere il tasto PTT (13). Per impostare la modalità VOX, eseguire le seguenti operazioni :

1. Premere più volte il tasto MENU (7) finchè l' icona VOX (A) inizia a lampeggiare sul display LCD.

2. Premere i tasti UP (8) o DOWN (9) per selezionare il livello di sensibilità desiderato, (livello 1 o livello 2).

Selezionando OF, la funzione VOX viene disattivata. La funzione VOX è più sensibile impostando il livello 2.

Quando la funzione VOX è attivata, l' icona VOX (A) appare sul display LCD.

3. Per confermare la selezione eseguita ed uscire dal menu, premere i tasti PTT (13) o CALL (6) oppure premere il tasto

MENU (7) per passate alla funzione successiva.

Selezione della Potenza del Trasmettitore

La radio dispone di una funzione di regolazione della potenza RF del trasmettitore (alta/bassa), questa funzione è attivabile solamente per i canali PMR. Questa funzione è molto utile per ridurre il consumo della batteria durante comunicazioni a breve distanza. Per selezionare la potenza del trasmettitore, eseguire le seguenti operazioni :

1. Premere più volte il tasto MENU (7) finchè la scritta Pr (H) inizia a lampeggiare.

2. Premere i tasti UP (8) o DOWN (9) per selezionare il livello di potenza desiderato HI (alta potenza) o LOW

(bassa potenza).

3. Per confermare la selezione eseguita ed uscire dal menu, premere i tasti PTT (13) o CALL (6) oppure premere il tasto MENU (7) per passate alla funzione successiva.

4.

A seconda della selezione effettuata, sul display comparirà LOW (F) o HI (G).

Nota : questa funzione è disponibile solamente per gli 8 canali PMR.

- 23 -

Funzionamento

Impostazione del tono di tastiera

Ogni qualvolta viene premuto un tasto della radio, un tono beep è prodotto per confermare il comando inserito.

Questa nota musicale può essere attivata o disattivata dall’utente, eseguendo le seguenti operazioni :

1. Premere più volte il tasto MENU (7) finchè l' icona del tono (I) inizia a lampeggiare sul display LCD.

2. Premere i tasti UP (8) o DOWN (9) per selezionare on (tono beep attivato) oppure oF (tono beep disattivato).

3. Per confermare la selezione eseguita ed uscire dal menu, premere i tasti PTT (13) o CALL (6) oppure premere il tasto

MENU (7) per passate alla funzione successiva.

4.

Se il tono di tastiera è attivato, sul display compare l' icona (I).

Impostazione della funzione Roger Beep

Questa funzione permette di inviare automaticamente una nota musicale quando viene rilasciato il tasto PTT (13).

Questo avviso musicale conferma al vostro corrispondente che la vostra trasmissione è finita. Per impostare la funzione Roger Beep, eseguire le seguenti operazioni :

1. Premere più volte il tasto MENU (7) finchè l' icona del tono Roger Beep (D) inizia a lampeggiare.

2. Premere i tasti UP (8) o DOWN (9) per selezionare on (tono beep attivato) o oF (tono beep disattivato).

3. Per confermare la selezione eseguita ed uscire dal menu, premere i tasti PTT (13) o CALL (6) oppure premere il tasto

MENU (7) per passate alla funzione successiva.

4.

Se il tono Roger Beep è attivato, sul display compare l' icona (D).

Impostazione del Tono di Chiamata Call

La radio dispone di 3 differenti toni musicali (melodie) per l' avviso di chiamata. Per selezionare la melodia desiderata, eseguire le seguenti operazioni :

1. Premere più volte il tasto MENU (7) finchè appare la scritta CA (L) e il numero della melodia selezionata (H) inizia a lampeggiare sul display LCD.

2. Premere i tasti UP (8) o DOWN (9) per selezionare la melodia desiderata, da 1 a 3.

3. Per confermare la selezione eseguita ed uscire dal menu, premere i tasti PTT (13) o CALL (6) oppure premere il tasto

MENU (7) per passate alla funzione successiva.

4 Per inviare una chiamata, premere brevemente il tasto CALL (6).

Impostazione della funzione Dual Watch

La radio è dotata della funzione Dual Watch, che consente di monitorare 2 canali differenti, inclusi i corrispettivi codici

CTCSS. Per abilitare la funzione Dual Watch, eseguire le seguenti operazioni :

1.

Selezionare il primo canale da monitorare.

2. Premere più volte il tasto MENU (7) finchè le scritte oF (L) (funzione disattivata) e l' icona DW (C) inizieranno a lampeggiare sul display LCD.

3. Premere i tasti UP (8) o DOWN (9) per selezionare il secondo canale da monitorare tra gli 8 PMR e i 69 LPD disponibili.

4.

Premere il tasto MENU (7) per confermare la selezione ed utilizzare i tasti UP (8) o DOWN (9) per selezionare il tono CTCSS desiderato tra i 38 disponibili. Selezionando 0F, non verrà associato alcun tono CTCSS al canale selezionato.

5. Per confermare la selezione eseguita ed uscire dal menu, premere i tasti PTT (13) o CALL (6).

- 24 -

Funzionamento

6.

Se la funzione Dual Watch è attivata, sul display compare l' icona DW (C). La radio inizierà il monitoraggio arrestandosi automaticamente quando, su uno dei 2 canali, verrà ricevuto un segnale, per poi riprendere la scansione al termine della comunicazione.

7. Per disattivare la funzione Dual Watch, premere il tasto SCAN (12) o il tasto MENU (7).

La radio tornerà in modalità Stand-by.

Scansione Automatica

Questa funzione permette la scansione automatica di tutti i canali e delle memorie programmate. Per attivare la scansione procedere come segue :

1. Premere brevemente il tasto SCAN (12); la radio inizierà automaticamente la scansione alla ricerca dei canali in uso e sul display verrà visualizzata l' icona SCAN (B). La scansione si arresta sul primo canale attivo trovato, per poi ripartire dopo circa 4 secondi dal termine della comunicazione. Se durante la scansione viene premuto il tasto PTT (13), la radio interromperà la scansione e si posizionerà sull' ultimo canale dove è avvenuta una comunicazione e la riprenderà dopo circa 14 secondi se nessuna trasmissione viene più ricevuta. Se viene ricevuto un segnale che include un codice CTCSS, la radio mostrerà quel canale con il corrispettivo codice. Se il codice ricevuto è diverso da quello pre-programmato, la radio non potrà comunicare con quel corrispondente.

2. Per uscire dalla modalità scansione, premere nuovamente il tasto SCAN (13).

Blocco della Tastiera

Per evitare l' inserimento di comandi accidentali, premere il tasto SCAN/LOCK (12) per circa 2 secondi. L' icona

LOCK (M) apparirà sul display LCD. Quando questa funzione è inserita, i tasti UP (8), DOWN (9), SCAN (12) e

MENU (7) sono disattivati. Quando il blocco tastiera è attivo è possibile accendere o spegnere la radio, usare il tasto

MON (11), trasmettere e ricevere e inviare un tono di chiamata. Per sbloccare la tastiera, premere nuovamente il tasto SCAN/LOCK (12) per circa 2 secondi.

Auto Squelch

La radio dispone di un sistema di silenziamento automatico (SQUELCH) che, in assenza di segnale, toglie automaticamente il rumore di fondo o i segnali troppo deboli, a causa delle condizioni ambientali o di portata.

Premendo il tasto MON (11), lo Squelch viene disattivato ed è possibile ascoltare il rumore di fondo o i segnali più deboli. Per riattivare lo Squelch, premete nuovamente il tasto MON (11).

Automatic Power Save

La radio comprende un dispositivo automatico chiamato AUTOMATIC POWER SAVE, che permette di estendere in modo significativo la durata della batteria. Se la radio resta in Stand By (modo di attesa) per almeno 5 secondi, il circuito Power Save viene attivato. La radio può comunque sempre ricevere trasmissioni in questa modalità.

- 25 -

Specifiche Tecniche - Accessori Opzionali

Specifiche Tecniche

Canali

Gamma di Frequenza

Alimentazione

Potenza di uscita

Dimensioni

Peso

8 Canali PMR + 69 Canali LPD con 38 codici CTCSS

UHF 446.00625 - 446.09375 MHz (Banda PMR)

UHF 433.07500 - 434.77500 MHz (Banda LPD)

6.0V (4 x AAA 1,5V pile alkaline)

4.8V (4 x AAA batterie ricaricabili Ni-MH)

4.8V (pacco batterie ricaricabili Ni-MH)

0.5W ERP Alta / 0.01W ERP Bassa (Banda PMR)

0.01W ERP massimo (Banda LPD)

A170 x L55 X P40 mm (antenna inclusa) gr. 142 (pacco batterie incluso)

Antenna Danneggiata

Non usare mai la radio se l' antenna è danneggiata. Se un' antenna danneggiata viene a contatto con la pelle, è possibile che accada una piccola bruciatura.

Informazioni Importanti sulle Batterie

Eliminate le batterie utilizzando gli appositi contenitori previsti nella vostra area. Le batterie possono provocare perdite di liquido elettrolita, se inserita in modo errato, gettata nel fuoco o se caricata in modo errato o con caricatori diversi da quello originale.

Accessori Opzionali

MT-SM100

MT-SM200

Microfono-Auricolare esterno con Clip per cravatta

Microfono-Auricolare esterno con Clip per cravatta

SM-007-A1

HS-2PIN-S/INT

HS-2PIN-S/JET

DDC-800

Microfono-Auricolare trasparente adatto per uso Sicurezza

Kit per motociclisti (per casco integrale)

Kit per motociclisti (per casco aperto)

Caricatore elettronico da tavolo di tipo rapido

- 26 -

Altre informazioni

Informazioni Importanti

Importante !

Modifiche o interventi sulla radio possono farvi perdere la vostra autorizzazione ad utilizzare il prodotto. Questa ricetrasmittente è progettata per trasmettere un segnale regolato su specifiche frequenze assegnate. E' una violazione della legge modificare i settaggi o le regolazioni interne della radio per eccedere questi limiti. Qualsiasi regolazione o intervento tecnico sul prodotto deve essere effettuata unicamente da un tecnico qualificato o da un centro di servizio autorizzato.

Per la sicurezza :

Non aprite mai il contenitore della radio (tranne per sostituzione delle batterie).

Non cambiate o sostituite nulla all' interno della radio (tranne le batterie).

La vostra radio potrebbe occasionalmente causare delle interferenze radio o TV, anche se utilizzata correttamente. Per determinare se queste interferenze sono causate dalla vostra radio spegnete l' apparecchio. Se le interferenze sono cessate, la causa è la vostra radio. Per eliminare il problema, spostate la radio più lontana dal ricevitore radio o TV disturbato. Se le interferenze persistono, non usate la radio in tale luogo.

Luoghi pericolosi :

Non utilizzate la radio in luoghi pericolosi, esempio presenza di esplosivi o di dispositivi sensibili alle trasmissioni radio, all' interno di aeromobili.

Cura e Manutenzione :

Per pulire la radio, usare un panno soffice inumidito con l' acqua. Non usate assolutamente solventi o prodotti similari, in quanto gli stessi possono danneggiare il contenitore della radio, lo schermo LCD e penetrare all' interno della radio, causando danni al circuito e alle batterie. Non immergete assolutamente la radio nell' acqua e non

usatela in ambiente umido. Se la radio si bagna accidentalmente, spegnetela e rimuovete la batteria immediatamente. Asciugate bene la batteria e l' interno della radio con un getto di aria tiepida, per rimuovere ogni residuo di acqua o umidità. Lasciate la radio aperta senza la batteria per almeno una notte in modo che la stessa si asciughi completamente.

Avviso :

Il contenuto di questo manuale è stato attentamente controllato, tuttavia il fabbricante non assume alcuna responsabilità per problemi derivanti da errori e omissioni nel testo. Nessuna parte di questo manuale può essere riprodotta o utilizzata in ogni modo, senza autorizzazione specifica del fabbricante.

- 27 -

Avvertenze Importanti - Avviso agli utenti - Garanzia Limitata

Avvertenze Importanti !

QUESTO PRODOTTO E' DESTINATO AL MERCATO ITALIANO E PERTANTO L' IMPIEGO DELLO STESSO E'

SOGGETTO ALLE NORME DI LEGGE IN VIGORE IN ITALIA.

Nella maggior parte dei paesi CEE, l' impiego di ricetrasmettitori LPD e PMR 446 è libero, in conformità con le direttive CEE e l' utente non é soggetto ad alcuna tassa, concessione, autorizzazione o licenza d' uso. In alcuni paesi, tuttavia, la regolamentazione può essere differente; si consiglia pertanto di verificare la stessa presso il vostro rivenditore prima di utilizzare l' apparecchio.

Avvertenza ! Utilizzo degli apparecchi Multi-Standard

Il prodotto è del tipo Multi-Standard (DUAL BAND) e può essere utilizzato in tutti i paesi europei ed in alcuni paesi extra europei, ma solamente nei canali ammessi secondo le normative di ciascun paese.

PMR446 (8 canali) : Austria, Belgio, Rep. Ceca, Danimarca, Finlandia, Francia, Germania, Grecia, Islanda, Irlanda, Italia,

Lussemburgo, Norvegia, Olanda, Polonia, Portogallo, Spagna, Svezia, Svizzera, UK, Turchia

LPD433 (69 canali) : Austria, Francia, Germania, Grecia, Norvegia, Olanda, Russia, Svezia

BANDA PMR : L' uso di questo apparecchio può essere soggetto a restrizioni nazionali (per l' uso in Italia è richiesta l' autorizzazione generale come da D.I. 259 del 01-08-03 art. 99 comma 3; All. 25 art. 36). E' sufficiente presentare una semplice dichiarazione e versare un modesto canone annuo (da 12 euro indipendente dal numero degli apparati).

Avviso agli utenti

Ai sensi dell’art. 13 del decreto legislativo 25 luglio 2005, n. 15”Attuazione delle Direttive 2002/95/CE, 2002/96/CE e

2003/108/CE, relative alla riduzione dell’uso di sostanze pericolose nelle apparecchiature elettriche ed elettroniche, nonché allo smaltimento dei rifiuti”.

Il simbolo del cassonetto barrato riportato sull’apparecchiatura indica che il prodotto alla fine della propria vita utile deve essere raccolto separatamente dagli altri rifiuti.

L’utente dovrà, pertanto, conferire l’apparecchiatura giunta a fine vita agli idonei centri di raccolta differenziata dei rifiuti elettronici ed elettrotecnici, oppure riconsegnarla al rivenditore al momento dell’acquisto di una nuova apparecchiatura di tipo equivalente, in ragione di uno a uno.

L’adeguata raccolta differenziata per l’avvio successivo dell’apparecchiatura dismessa al riciclaggio, al trattamento e allo smaltimento ambientalmente compatibile contribuisce ad evitare possibili effetti negativi sull’ambiente e sulla salute e favorisce il riciclo dei materiali di cui è composta l’apparecchiatura.

Lo smaltimento abusivo del prodotto da parte dell’utente comporta l’applicazione delle sanzioni amministrative di cui al dlgs. n. 22/1997” (articolo 50 e seguenti del dlgs. n. 22/1997).

Garanzia Limitata

Questo prodotto é garantito contro difetti nei materiali e nella lavorazione, in condizioni di uso e servizio normali, per un periodo di un anno, sempre che il prodotto sia ritornato senza spese al rivenditore presso cui é stato acquistato, accompagnato dallo scontrino fiscale o altro documento di acquisto, comprovante la data effettiva di acquisto. Questa garanzia non copre difetti o danni derivanti da abuso, uso improprio, modifiche non autorizzate, perdita di liquidi delle batterie, utilizzo in ambiente inadatto o normale deperimento d' uso.

Tutti i valori presenti nel manuale sono misurati in condizioni ottimali di utilizzo. Tutti i disegni, i testi e le caratteristiche tecniche non sono impegnativi e possono essere variati in qualunque momento.

- 28 -

Dichiarazione di Conformità

DICHIARAZIONE DI CONFORMITA'

Con la seguente dichiarazione si attesta che i prodotti :

INTEK MT-3030D soddisfano tutte le norme tecniche applicabili ai suddetti prodotti secondo le Direttive

Comunitarie 73/23/EEC, 89/336/EEC e 99/5/EC.

Tipo di prodotto :

Dettagli degli standard applicati :

Produttore :

Punto di contatto :

Ricetrasmettitore LPD / PMR 446

EN 300 220-1-2-3, EN 301 489-1-3, EN 60065

EN 300 296-2, EN 301 489-5, EN 60065

INTEK S.R.L.

Via G. Marconi, 16

20090 Segrate (Mi)

Tel. 02-26950451 / Fax 02-26952185

E-Mail [email protected]

Armando Zanni

Tel. 02-26950451 / Fax 02-26952185

E-Mail [email protected]

Segrate, 11/01/2008 dr. Vittorio Zanetti (amministratore unico)

N. di serie :

MT-3030

Timbro e firma del rivenditore

Data:

Prodotto importato e distribuito da

INTEK S.R.L.

Via G. Marconi, 16 - 20090 Segrate (MI) - Tel. 02-26950451 - Fax. 02-26952185 www.intek-com.it / e-mail : [email protected]

Notes

- 30-

PRINTED IN CHINA

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement