HP LaserJet 1022 Printer series User manual

HP LaserJet 1022 Printer series User manual
HP LaserJet 1022n
HP LaserJet
1022, 1022n, 1022nw
90.5|32.5 50|10
© 2005 Hewlett-Packard Development Company, L.P.
Additional information
See the electronic User Guide on the CD-ROM that came with the printer for more
information on the following topics:
· Troubleshooting information
· Important safety notices and regulatory information
· Detailed user instructions
This information is also available at http://www.hp.com/support/lj1022
Informasi tambahan
Untuk informasi lebih lanjut mengenai topik-topik berikut, lihat Buku Pedoman versi
elektronik pada CD-ROM yang disertakan bersama printer:
· Informasi tentang identifikasi masalah
· Pemberitahuan penting mengenai keselamatan dan informasi mengenai peraturan
· Petunjuk lengkap untuk pengguna
Informasi ini juga tersedia di http://www.hp.com/support/lj1022
Copyright Information
© 2005 Copyright Hewlett-Packard Development Company, L.P.
Reproduction, adaptation or translation without prior written permission is prohibited,
except as allowed under the copyright laws.
The information contained herein is subject to change without notice.
The only warranties for HP products and services are set forth in the express warranty
statements accompanying such products and services. Nothing herein should be
construed as constituting an additional warranty. HP shall not be liable for technical or
editorial errors or omissions contained herein.
Part number: Q5913-90906
Edition 1, 03/2005
FCC regulations
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy. If this
equipment is not installed and used in accordance with the instructions, it might cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase separation between equipment and receiver.
• Connect equipment to an outlet on a circuit different from that to which the receiver
is located.
• Consult your dealer or an experienced radio/TV technician.
Any changes or modifications to the printer that are not expressly approved by HP
could void the user’s authority to operate this equipment. Use of a shielded interface
cable is required to comply with the Class B limits of Part 15 of FCC rules.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF