Paxton PROXIMITY standalone system Application note

Below you will find brief information for PROXIMITY standalone system. This document provides instructions on how to program a standalone PROXIMITY system, including enrolling new cards, adding additional tokens, barring lost or stolen cards, and adjusting the door open time.

PDF Download

Document

Compact
AN1005
How to program a standalone PROXIMITY system
PROXIMITY standalone systems
Standalone PROXIMITY systems are designed to be
installed and administered with minimum effort.
All configuration and administration is carried out
using function cards, allowing the user to easily
tailor the system to suit the individual site. At every
stage of the programming the PROXIMITY reader will
acknowledge, by way of beeps or LED's, that each
step has been performed successfully.
Enrolment card
Enrolling a new system - When a PROXIMITY system is first switched on, the enrolment card must be
presented so that the reader will identify the user tokens for your site.
1
2
3
D
AR
NC
IO ard
e
th
to ck
CT nt c
rd is pa
is ca th
is
UN e
t th in
t th
F rolm
En
en kens
en
es
es wed
pr e to
n pr llo
n,
ke fo
tio e th
to er
alla lidat
er ad
inst to va
a us e re
At
ate to th
1. ader
alid rd
re
re-v t ca
en
To
2. rolm ken
en er to
us
FUNCTION CARD
Enrolment card
1. At installation, present this card to the
reader to validate the tokens in this pack
by
e
th
!
EP
BE P!
E
BE
D
AR
NC
IO ard
e
th
to ck
CT t c
rd pa
n
to
x
Pa
4
N en
FU rolm
En
is
e
is ca th
is
t th in
t th by th
en kens
en
es
es wed
pr e to
n pr llo
n,
ke fo
tio e th
to er
alla lidat
er ad
inst to va
a us e re
At
ate to th
1. ader
alid rd
re
re-v t ca
en
To
2. rolm ken
en er to
us
D
AR
NCd
e
th
TIO car
to ck
NC ent t this cainrdthis pa this the
t by
FU rolm
ns
en
en
es toke
es wed
n
xto
En
Pa
n
xto
Pa
pr e
n pr llo
n,
ke fo
tio e th
to er
alla lidat
er ad
inst to va
a us e re
At
ate to th
1. ader
alid rd
re
re-v t ca
en
To
2. rolm ken
en er to
us
2. To re-validate a user token present this
enrolment card to the reader followed by the
user token
Paxton
1. Take the enrolment card from the new token pack.
2. Present the enrolment card to the reader.
3. The reader beeps and the LED's light up as the enrolment card is acknowledged.
4. All tokens in the pack are now valid. The enrolment card can now be returned to its pack.
Adding additional tokens
When more tokens are required a new pack may be purchased from your normal supplier.
1
RD
CA
N
IO card to the
pack
cardthis
NCT ent
this in
this the
FU rolm
ent ns
ent by
wed
pres toke
n pres
i
allat
inst v
to
En
1.
2
3
xton
Pa
!
EP
BE P!
E
E
B
!
EP
BE P!
E
E
B
At er
the
follo
1. on,
toke er
llati atere-v
read
n read
insta validTo
a user
At er to 2.
tetoke the
to :
alida
info
user
re-v nt carde
To lme Mor
n
2.
enro toke
user
read
+
4
RD
CA
N
IO ard to the
ck
CT t c
rd pa
N en
FU rolm
FUNCTION CARD
En
Enrolment card
1. At installation, present this card to the
reader to validate the tokens in this pack
2. To re-validate a user token present this
enrolment card to the reader followed by the
user token
is
e
is ca th
is
t th in
t th by th
en kens
en
es
es wed
pr e to
n pr llo
n,
ke fo
tio e th
to er
alla lidat
er ad
inst va
a us e re
At er to
ate to th
1.
alid rd
read
re-v t ca
To en
2. rolm ken
en er to
us
n
Pa
xto
RD
CA
N
IO ard to the
ck
CT t c
rd pa
N en
FU rolm
En
is
e
is ca th
is
t th in
t th by th
en kens
en
es
es wed
pr e to
n pr llo
n,
ke fo
tio e th
to er
alla lidat
er ad
inst va
a us e re
At er to
ate to th
1.
alid rd
read
re-v t ca
To en
2. rolm ken
to
en er
us
n
Pa
xto
RD
CA
N
IO card to the
pack
cardthis
NCT ent
this in
this the
FU rolm
ent ns
ent by
wed
pres toke
n pres
i
allat
inst v
to
En
1.
xton
Pa
At er
the
follo
1. on,
toke er
llati atere-v
read
n read
insta validTo
a user
At er to 2.
tetoke the
to :
alida
info
user
re-v nt carde
To lme Mor
n
2.
enro toke
user
read
RD
CA
N d
TIO car rd to thpaeck
is
NC ent
e
is ca th
is
t th in
t th by th
FU rolm
en ns
en
es toke
es wed
pr e
n
n pr llo
n,
E
At
1.
ti
la
al
st v
to
n
xto
Pa
in
1. ad
ke fo
tioer e th
alrela lidat re-v er to ader
usn e re
inst va To
At er to 2. atetoake th
ider rd to fo:
alus
in
re-v t ca e
To en n or
2. rolm keM
en er to
us
read
Paxton
1. All Paxton token packs include an enrolment card.
2. Present the enrolment card from the original pack.
3. Present the new enrolment card from the new pack.
4. All tokens in the pack are now valid. The enrolment card can now be returned to its pack.
1
Compact
AN1005
Issuing tokens
2
1
3
4
Shadow cards
User cards
1. On each page there are 'pairs' of tokens - a 'User card' and a corresponding 'Shadow card'.
2. Write the name of the user on the shadow card.
3. Issue the user card to the user.
4. Keep the card pack containing the shadow cards in a safe place.
Bar a user
1
2
3
4
1. When a token is lost or stolen it is important to bar the token to stop unauthorized access.
2. To bar a token take its corresponding shadow card from the card pack.
3. Present the shadow card to the reader. This will bar the token from that reader.
4. If the token is presented, the red LED will flash and access will not be granted.
Re-validating a user token - An enrolment card is required to re-validate a card that has been barred from the
reader. First present the enrolment card and then the token that is to be made valid. The reader will beep to
acknowledge and the token can be used again at that door.
2
Compact
AN1005
Door open time card
This card is used to adjust the length of time the door remains open when a valid card is presented.
1
2
RD
CA
na
N e
he
rw
fo
TIO tim
ed ws:
NC open r is unlotckas follo
U
se
F or
doo is
FUNCTION CARD
Door open time
Do
The period that the door is unlocked for when a
valid token is presented is set as follows:
1. Present this card
2. Wait for the required period
3. Present this card again, the beeping will stop
e ed
ing
th
d eep
at sent
erio e b
d th is pre
d p th
rd
erio n
ca quire ain,
e p ke
is
ag
Th lid to
t th e re rd
va
en r th is ca
es
Pr t fo th
1. Wai ent
2. Pres
3.
3
4
!
EP
BE P!
E
BE
will
RD
CA
na
N e
he
rw
IO im
fo
CT pen t unlockedfollows:
N
is t as
o
U
stop
F oor
D
or is se
e do ted
th
at esen
th
ing
will
stop
d ep
rio e be
th
pr
d
d pe
rio n is
rd
ca quire ain,
e pe ke
is
ag
Th lid to
t th e re rd
va
en r th is ca
es
Pr t fo th
1. Wai ent
2. Pres
3.
1. Take the door open time function card from the starter pack.
2. Present the card to the reader. The reader will start beeping.
3. Wait for the required period you wish the door to remain open.
4. Present the card again at the end of the period to set the open time. The beeping will stop.
Silent operation card
The silent operation card toggles the system between standard mode, where the reader will beep when a
card is presented, and silent operation, for areas where the system is required to work in silence.
1
2
3
4
!
EP
BE P!
E
E
B
P!
E
BE
FUNCTION CARD
Silent Operation
Present this card to silence the beeping noises
made by the reader. Present this card again to
re-enable the beeping noises.
RD
CA
N n
ises
no n to
IO tio
ing ai
ep ag
CT era
be rd
N p
FU ent O
Sil
is
t th
e is
e th t th
nc
sile esen es.
to . Pr nois
rd
ca ader ing
e re beep
e
th
en
es by th
Pr ade ble
m -ena
re
ca
RD
CA
N n
ises
to
g no ain
IO tio
CT pera the beisepcainrd ag
N
O
e t th
U t
nc
F en
Sil
sile esen es.
to Pr is
rd er. g no
ca
is read epin
t th the be
e
en
es by th
Pr ade ble
m -ena
re
1. Take the silent operation function card from the starter pack.
2. Present the card to the reader. The reader will beep.
3. The reader is now in silent operation mode.
4. Present the card again to disable silent operation mode. The reader will beep twice.
3
">

Hello! I am an AI chatbot specifically trained to assist you with the Paxton PROXIMITY standalone system Application note. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!

Show related prompts

Assistant typing

Assistant terminated

Key Features

Enrolling new cards
Adding additional tokens
Barring lost or stolen cards
Adjusting the door open time
Silent operation

Frequently asked questions

How do I enroll a new card?

To enroll a new card, present the enrollment card to the reader. The reader will beep and the LEDs will light up. All tokens in the pack are now valid.

How do I add additional tokens?

When more tokens are required, a new pack may be purchased from your normal supplier. To add additional tokens, present both the original enrollment card and the new enrollment card to the reader. The reader will beep and the LEDs will light up. All tokens in the pack are now valid.

How do I bar a lost or stolen card?

To bar a lost or stolen card, take its corresponding shadow card from the card pack and present the shadow card to the reader. This will bar the token from that reader. If the token is presented, the red LED will flash and access will not be granted.

How do I adjust the door open time?

To adjust the door open time, present the door open time function card to the reader. The reader will start beeping. Wait for the required period you wish the door to remain open. Present the card again at the end of the period to set the open time. The beeping will stop.