Aluratek ABLK04F User manual

Aluratek ABLK04F User manual
Portable Slim LED Backlit
Bluetooth Keyboard
Charging the battery
The battery is not fully charged and it is highly recommended that you charge ABLK04F before you begin using it.
Note: Using ABLK04F “out of the box” will not harm the device. You will experience reduced battery life as the unit will not be fully charged.
Connect the micro USB end of the USB cable provided to the keyboard and the other end of the USB cable to a
computer. Please charge the battery for a minimum of 3 hours. The red LED will be on while charging. When
charging is complete, the red LED will turn off.
Pairing ABLK04F with your Smartphone / Tablet
1. Make sure ABLK04F is turned ON by sliding the power switch towards
the connect button. The blue LED will flash once.
2. Activate ABLK04F pairing mode by pressing the button next to the
ON / OFF Switch. The blue LED will start to flash.
3. Activate your Smartphone’s/Tablet’s Bluetooth function and search for devices.
4. Select ABLK04F from the device list to initiate the pairing process.
5. Please enter the 4 digit PIN code shown on the screen on your Smartphone
/ Tablet on the keyboard and press “Enter”. The blue LED will turn OFF.
6. The keyboard should be paired/connected and ready to use.
Portable Slim LED Backlit
Bluetooth Keyboard
Radio and TV Interference Statement
WARNING!!! This equipment has been tested and found to comply with the limits of a Class B digital device,
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by whatever measures may be required to correct the interference.
Technical Support & Warranty
If you need further assistance, please contact the Aluratek support department for troubleshooting prior to returning
this device by calling toll free 1-866-580-1978 or email: [email protected]
Aluratek warrants this product against defect in material or workmanship for 1 Year from the date of purchase.
- For more information, please visit:
- You can register your product online at:
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF