NCVT-2 - Octopart
DUAL RANGE
Non-Contact Voltage Tester
NCVT-2
Dual Range
Voltage Detection
Low Voltage
12-48V
Standard Voltage
48-1000V
Automatically detects and indicates Low Voltage (12-48 Volts AC)
and Standard Voltage (48-1000 Volts AC), allowing broad application.
The NCVT-2 is a convenient, compact tool
that helps you work safer and faster.
High Intensity Red LED
and Continuous Warning Sound
when voltage is detected
F o r
P r o f e s s i o n a l s . . . S i n c e
1 8 5 7
®
Non-Contact Voltage Tester (NCVT-2)
Features
• Automatically detects and indicates low voltage (12-48 Volts AC)
Power On Indicator & Illuminator:
and standard voltage (48-1000 Volts AC), allowing broad application.
Visual:High Intensity,
Bright Green LED
• Non-contact detection of standard voltage in cables, cords,
circuit breakers, lighting fixtures, switches, outlets, and wires.
• Non-contact detection of low-voltage in security, entertainment,
Power Off & Auto Power Off:
communications, environmental control, and irrigation systems.
Visual: Power On LED Turns Off
Audible:Double Warning Tone
• High intensity, bright green LED indicates the tester is operational
and aids in illuminating the workspace.
Low Battery Indicator:
Digitally controlled ON/OFF power button.
•
• Auto power-off feature conserves and extends battery life.
• Microprocessor controlled low-battery indicator.
• CAT IV 1000 Volt rating provides expanded operation and protection.
• Lightweight durable polycarbonate plastic resin construction
Visual:Green LED Blinks
Audible:Warning Tone
Voltage Detection Indicator:
Visual:High Intensity
Red LED
Audible:Continuous
Warning Tone
with a convenient pocket-clip.
• Package contains insert card w/ integrated owner's manual
and 2 AAA 1.5 volt batteries.
also available
NCVT-2
NCVT-1
Voltage Range
12 TO 48 VOLTS AC (Low)
48 TO 1000 VOLTS AC (Standard)
Audible
Visual
Low-Pitched Pulsing Beeping Sound
Green LED Turns OFF and Red LED Blinks (approximately 2-times per second).
High-Pitched Continuous Beeping Sound
Green LED Turns OFF and Red LED illuminates continuously.
Cat. No.
NCVT-2
NCVT-1
Voltage
Frequency Pollution Batteries
Range:
Degree
Width
Height
Weight
(oz.)
Weight w/
Batteries (oz.)
12-1000
Volts AC
50-500 Hz
2
AA
2 xA
AAA
Overall
Length
5.50"
(14.0 cm)
0.72"
(1.8 cm)
1.0"
(2.5 cm)
0.8 oz
(23 g)
1.6 oz
(46 g)
50-1000
Volts AC
50-500 Hz
2
2 x AAA
5.50"
(14.0 cm)
0.72"
(1.8 cm)
1.0"
(2.5 cm)
0.8 oz
(23 g)
1.6 oz
(46 g)
ARange:
AA
Standards:
UL 61010-1 2nd edition
CAN/CSA C22.2 No. 610101-04
EN 61010-1 2nd edition
IEC 61010-1:2001 2nd edition
ISA-82.02.01 (IEC 61010-1 MOD)
CAT
IV
Double
Insulated
Operating / Storage Conditions:
Temperature:
32° to 104° F (0° to 40° C)
Relative Humidity: <80%
Altitude:
Up to 6,562 feet
(2,000 meters) maximum
Environment:
Indoor
E321008 3TMV
WARRANTY:
Klein electronic test and measurement devices (and accessories), manufactured and sold for commercial or industrial uses, are warranted to be free from defects in materials and workmanship for
two years from the date of purchase (unless otherwise noted on the product packaging). THERE ARE NO IMPLIED WARRANTIES OF MERCHANTIBILITY OR FITNESS. At its option, Klein will repair
or replace, or refund the purchase price of, any product which fails to conform to this warranty under normal use and service. In no event shall Klein be liable for incidental or consequential damage.
This warranty does not apply to batteries.
WARNINGS:
• It is important that users of this tester read, understand, and follow all warnings,
cautions, safety information, and instructions in this manual before operating or
servicing this tester. Failure to follow instructions could result in death
or serious injury.
• Risk of electric shock and burn. Contact with live circuits could result in death or
serious injury.
• Use caution with voltages above 30V AC as a shock hazard may exist.
• A blinking or steady red glow and an audible beep indicate voltage present.
If no indication, voltage could still be present.
• In bright light conditions, the LED visual indicators will be less visible.
• Do not use if green LED is not illuminated.
CAUTION:
• Do not attempt to repair this tester. It contains no serviceable parts.
• Do not expose the product to extremes in temperature or high humidity.
© 2010 Klein Tools, Inc.
Lincolnshire, IL 60069-1418
WARNINGS:
• Do not use if tester appears damaged or if the tester is not operating properly.
If in doubt, replace the tester.
• Do not apply more than the rated voltage as marked on the tester (1000 volts AC).
• Always wear approved eye protection.
• Before each use, verify operation by testing a known working circuit that is within
the rating of this tester.
• Do not rely on this tester with shielded wire. Operation may be affected by
differences in socket design and insulation thickness and type.
• Comply with local and national safety requirements.
• If this tester is used in a manner not specified by the manufacturer, protection
provided by the tester may be affected.
www.kleintools.com
Disposal: Please do not throw tester
or batteries in trash; please recycle.
Printed in U.S.A.
96042
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement