Blaupunkt BT 10
Portables 2.1 Lautsprechersystem mit Bluetooth
Portable Bluetooth 2.1 Speaker
BT 10e
BT 10e
BT 10e
BT 10e
BT 10e
BT 10e
BT 10e
BT 10e
BT 10e
BT 10e
BT 10e
BT 10e
BT 10e
Vorbereitung vor der ersten Innbetriebnahme:
Bitte legen Sie zunächst den Lithiumakku in Ihre BT 10e ein, bevor Sie das
Gerät mit dem mitgelieferten Netztteil und Ihrem Stromnetz verbinden.
Laden Sie den Akku für drei bis vier Stunden. Sollten Sie Ihre BT 10e ohne
eingelegten Akku direkt ans Stromnetz anschließen, kann dies zu
Störgeräuschen im Lautsprecher führen.
BT 10e
BT 10e
BT 10e
BT 10e
BT 10e
BT 10e
BT 10e
BT 10e
BT 10e
BT 10e
BT 10e
BT 10e
Model number: BT 10e
Description: Portable 2.1 Bluetooth Speaker
Brand name: Blaupunkt
Responsible party: M3 Electronic GmbH
Gutenbergstrasse 5, D-65830 Kriftel. Germany
Hereby, Blaupunkt Competence Center Audio M3 Electronic GmbH, declares that this Class 1
equipment is in compliance with the essential requirement and other relevant provisions of
Directive 1999/5/EC.
Letter of conformity can be obtained from [email protected]
Safety Instructions
1. READ INSTRUCTIONS – All the safety and operating instructions should be read before
appliance's operated.
2. RETAIN INSTRUCTIONS - The safety and operating instructions should be retained for
future reference.
3. HEED WARNINGS – All warnings on the appliance and in the operating instructions
should be adhered to.
4. FOLLOW INSTRUCTIONS – All operating instructions should be followed.
5. WATER AND MOISTURE – The appliance should not be used near water, for example,
near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in web basement.
6. VENTILATION – The appliance should be situated so that its location or position does
not interfere with its proper ventilation. Do not place on bed, sofa, rug or similar surface
that may block the ventilation openings, in a built-in installation, such as a bookcase or
cabinet that may impede the flow of air through the ventilation openings.
7. HEAT – The appliance should be situated away from heat sources such as radiators,
stoves, or other appliances (including amplifiers) that produce heat.
8. POWER SOURCE – the appliance should be connected to power supply only of the type
described in the operating instructions or as marked on the appliance.
9. POWER CORD PROTECTION – power supply cords should be routed so that they are
not likely to be walked on or pinched by items placed upon or against them.
10. POWER LINES – an outdoor antenna should be located away from power lines.
11. OBJECT AND LIQUID ENTRY – care should be taken so that objects do not fall and
liquids are not spilled into the enclosure through openings.
BT 10e
12. ESD WARNING – the display does not function properly or not reaction to operation
of any the control may due to the electrostatic discharge. Switch off and unplug the set.
Reconnect after a few seconds.
13. DAMAGE REQUIRING SERVICE – the appliance should be serviced by qualified
service personal when: a. the power-supply cord or plug has been damaged. b. Objects
have fallen into, or liquid has been spilled into the appliance enclosure. c. The appliance
has been exposed to rain. d. The appliance has been dropped, or the enclosure damaged.
e. The appliance does not appear to operate normally.
14. SERVICING – the user should not attempt to service the appliance beyond that
described in the user operation instructions. All other servicing should be referred to
qualified service personnel.
15. DO ensure that all electrical connections (including the mains plug, extension leads
and inter-connections between the pieces of equipment) are properly made and in
accordance with the manufacturer's instructions. Switch off and unplug the power before
making or changing connections.
16. Unplug this apparatus during lightning storms or when unused for long periods of
17. Never unplug your radio by pulling on the power cord. Always grasp the plug firmly
and pull straight out from the outlet.
18. DON'T remove any fixed cover as this may expose dangerous voltages.
19. DON'T place hot objects or naked flame sources such as lighted candles or nightlight
on, or close to equipment. High temperatures can melt plastic and lead to fires.
20. DON'T leave equipment switched on when it is unattended unless it is specifically
stated that it is designed for unattended operation. Switch off using the switch on the
equipment and make sure that your family knows how to do this. Special arrangements
may need to be made for infirm or handicapped people.
21. DON'T continue to operate the equipment if you are in any doubt about if it's working
normally or if it's damaged in any way. Switch it off, unplug the mains power and consult
your dealer.
22. REPAIR OR REPLACE all electric service cords that have become frayed or otherwise
damaged immediately. Do not use a cord that shows cracks or abrasion damage along its
length, the plug, or the connector end.
23. DON'T place objects filled with liquids, such as vases on the apparatus.
24. Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
25. The mains plug shall remain readily operable.
BT 10e
26. Ensure a minimum distance of 5cm around the apparatus for sufficient ventilation.
27. The ventilation should not be impeded by covering the ventilation opening with
items such as newspapers, table-cloths, curtains, etc.
28. The batteries should be drawn to the environmental aspects of battery disposal.
ERP2 - (Energy related products) note
This product complies with the European Commission on Ecodesign Directive and its
implementing Regulations Energy related products because the unit works with low
voltage and current external power supplier. You can reference the regulation on EC No.
1275/2008 for details.
Uniquely designed 2.1 speaker system in a single compact sound box. Aesthetic in design, it
fits into most room types such as bedroom, kitchen or even your studies.
Connects wirelessly to your Bluetooth® wirelessly technology enabled mobile phone or
media player.
Enjoy music without any messy cables from the music source. Listen to your favourite music
from your mobile phone, tablet, or notebook. Alternatively you can connect to traditional
3.5 mm stereo music source.
Highly portable, this system features rechargeable battery and hand grip that lets you use it
almost anywhere.
• 2.1 speaker system for full range music production
• Wireless music with Bluetooth® technology
• Generous bass effects and clear treble
• Front panel controls for playback and Bluetooth® pairing functions
• Comes with alternative 3.5mm stereo connection to most media players and computer
• Rechargeable battery powered for portable use; carry it with you
Package contents
• Blaupunkt BT 10e speaker system 1 pc
• 3.5mm - 3.5mm audio cable 1 pc
• Charging adapter 1 pc
• Rechargeable battery, BL-5C 1 pc
• User manual 1 pc
BT 10e
Front view
Volume buttons
Mute / Bluetooth pairing
LED (Blue/Red/Green)
Side view
BT 10e
Rear View: Connection illustrations
Hand grip
Competence Center Audio
M3 Electronic GmbH.Kriftel-Germany
Blu-Ray player
to Charging
MP3 Link
MP3 / MP4
Media player
3.5 mm stereo
input source
PC or Notebook
Power On / Off
Battery Installment
Rechargeable battery
Type: Lithium
BL-5C rechargeable battery
Preparation before first usage:
Before connecting the power source please make sure that the chargeable Li-ion battery is
inserted. Afterwards power on the unit; playing music with external power adaptor without the
battery is not recommended because it will produce noise.
LED indication status
Power ON / OFF
Power ON - Blue LED will blink slowly for 20 secs searching for paired devices, after 20 secs it will
start new pairing sequence for 3 minutes.
MP3 Link
With MP3 LINK connected, Green LED illuminates in 5 secs intervals.
Bluetooth Pairing
When Bluetooth pairing sequence initiated, Blue LED will blink rapidly searching for new
Bluetooth devices
Bluetooth Paired
When Bluetooth device is paired successfully, Blue LED will blink slowly for 2 secs in 5 secs
Volume Adjust
Volume button is depressed, LED will illuminate in Green.
Battery Charging
Charging adapter connected to the mini-USB port, the LED will illuminate in bright red. Fully
charged, the red LED will turn dim.
BT 10e
1. Power on
Once turned on, after 3 seconds the system will search for previous paired devices for 20
seconds with its LED blinking slowly. After 20 seconds if no paired devices are found, it will
commence new pairing sequence automatically. It will start the pairing sequence for 3 minutes
before returning to the initial sequence of locating previously paired device.
2. Bluetooth Pairing ON (manually)
Blue LED blink rapidly
Depress for 3 secs, pairing mode sequence will commence. If prompted for security code,
please key in “0000”.
3. Bluetooth Pairing with BT audio device
Pairing with Bluetooth music devices. Once paired, Bluetooth LED will blink for 2 seconds once
about every 5 to 6 seconds interval. (skip this step if both Blaupunkt BT 10e and music device
had saved this profile before)
iPhone, iPad or iPod
go to SETTINGS > GENERAL > enable BLUETOOTH > select Blaupunkt BT 10e.
Android Phone
go to SETTINGS > WIRELESS & NETWORKS > enable BLUETOOTH > select Blaupunkt BT 10e
read the instruction manual included with your BT music device > enable BLUETOOTH > select
Blaupunkt BT 10e.
BT 10e
BT 10e
Paired successfully
will blink twice
in 5 to 6 seconds intervals
BT 10e
4. Bluetooth playback
Once connected, you can commence the music playback either on the mobile phone, tablet or
notebook, etc. The sound will be transferred wirelessly to the Blaupunkt BT 10e system directly.
During streaming, the LED will blink, once for 2 seconds duration in 5 seconds intervals.
Depress the + or - buttons for volume adjustments. The LED will illuminate in green steadily
once depress.
To mute the playback, depress the Mute button and the LED will illuminate in green constantly
till it is depress again to deactivate.
5. MP3 Link mode
Connect the 3.5 mm stereo source to the MP3 Link jack. This will immediately disconnect the
Bluetooth mode if it is on. Commence your media player via the 3.5 mm stereo connection.
6. Battery charging (Lithium battery type: BL-5C)
1. Connect the charging adapter to mini-USB port of the speaker . Ensure the speaker system is
turned off for charge. The system will commence its auto charging mode. The LED will
illuminate in bright red colour. Once fully-charged, it will be turn dim red. Please initial charge
the system for 4 hours prior to first.
2. The speaker can charge the battery at same time when you play the music and connect the
power adaptor. It is better to turn off the unit for full charging, and reduce the battery power
1. Please use the specified charger for charging/recharging the battery. Please do not shortcircuit.
2. It is prohibited to dispose batteries into household waste. Please follow the local legislation
for battery disposal.
3. The batteries should not be exposed or disposed into fire or excessive heat. Heavy damage is
not allowed. Otherwise, the batteries may explode.
4. Before initial usage please charge the battery more than 8 hours. The battery capacity may be
affected after 500 times charging.
BT 10e
Total Power: 4 Watt RMS
Power distribution: 1.25 Watt x 2 + 1.5 Watt
Harmonic distortion: < 5% 1 W 1 kHz
Frequency response: 40 Hz - 18 kHz
Signal/Noise ratio: > 65 dB
Separation: > 45 dB
Power consumption in standby mode: < 0.5W
Tweeter type: 2” x 2
Tweeter rated power: 2 Watt 4 Ohm
Woofer type: 3”
Woofer rated power: 5 Watt 2 Ohm
Output: NIL
Input: 3.5mm stereo jack, mini-USB charging port
Wireless: Bluetooth 2.1 + EDR, and A2DP
Check if the system is powered on or battery is replaced
with fresh BL-5C type
LED do not light up
No Sound
Please perform an initial charge of 4 hours prior to initial
Check if the audio source is properly paired and
connected. Secondly check if the 3.5mm stereo
plug is correctly inserted for MP3 Link mode.
Ensure volume is correctly set
Intermittent sound
Please check the audio source distance, try to place
it nearer to the speaker system.
How to charge the system?
Simply connect the system to the supplied Charging
adapter. After charged the LED will turned off.
What are the products supported?
Any Bluetooth enabled music devices and playback
devices such as PC, Media players with 3.5mm
stereo plug.
Sound is distorted
Check if the volume is at lower level and the Mp3
format is recorded at above 196 bitrate
It is magnetically shielded so can be placed
near LCD TV Monitor without any distortion
If the problem still exists, please contact the distributor or ask for professional service
Where to place this speaker
BT 10e
This symbol on the product or in the instructions means that your electrical and electronic
equipment should be disposed at the end of its life separately from your household waste.
There are separate collection systems for recycling in the EU.
For more information, please contact the local authority or your retailer where you purchased
the product.
All rights reserved by Blaupunkt Competence Center Audio M3 Electronic GmbH. This
material may be reproduced, copied or distributed for personal use only.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF