CN881
INSTALLATION STEPS
AIR COOLING SYSTEM
H.D.T. SERIES
1 Peal off the adhesive from 3 Back plate. Adhere 3 Back plate onto the back side of M/B.
Use 1 Screw to fasten 4 Bracket, M/B and 3 Back plate.
2 Set the Heat-sink on the CPU, and use 2 K8/AM2 Clip to fasten Heat-sink on the 4 Bracket
3
Fasten the one side (which is able rotating) of 2 K8/AM2 Clip to 4 Bracket http://www.xigmatek.com
E-mail: [email protected] [email protected]
2008 © XIGMATEK Co., Ltd. All rights reserved. All trademarks are the property of their respective owners.
