Telco Depot IP-PBX Software Features

Add to my manuals
10 Pages

advertisement

Telco Depot IP-PBX Software Features | Manualzz

Telco Depot IP-PBX Software Features

Based on the Elastix Asterisk distribution,

Telco Depot’s entire family of IP-PBX appliances provide all the standard telephone functionality supported by

Asterisk at no extra cost, including:

Analog Phone Support

Supports integrated analog ports to connect

Analog/Digital Ready standard analog telephones, fax machines or credit card machines.

Not ready to go 100% VoIP? Telco Depot IP-PBX allows you to add options such as analog line modules or T1/E1 PRI or R2 protocol interface

ANI Routing

Announcement Interface

Blacklists modules for additional connections to the

Public Switched Telephone Network (PSTN).

Routes calls to certain departments or certain locations based on the incoming Caller ID or

Automatic Number Identification.

Create customized auto attendant announcements in two methods: a) Upload .wav files b) Record them through a telephone handset

Create a list of persons or organizations that have incurred disapproval or suspicion and regulate the telephone system behavior accordingly. For example, the Caller ID of these persons or organizations can be programmed in the Telco Depot IP-PBX so when they call they would hear a message that says: “The party you are trying to reach is not accepting calls at this time.”

Blind Transfer

Call Detail Record or CDR

Transfer a call to another extension without the need to wait for the other person to pick up. This type of transfer will also send the CID of the outside caller to the extension where the call is transferred.

A log of all calls made including: source number; destination number; call duration, date and time. Full graphic reporting included as standard.

Call Forward on Busy

Call Forward on No Answer

Call Monitoring

Call Parking

Call Pickup

Call Queuing

Call Recording (Extension)

Call Recording (On-the-Fly Recording)

Call Return

Call Screening

Call Whisper

Calls are automatically forwarded to another extension or phone number if the phone is busy.

Calls are automatically forwarded to another extension or phone number if not answered after a defined number of rings.

Allows a supervisor to listen in on a phone conversation.

Allows a call to be „parked‟ on a virtual extension and then picked up by a third party by dialing to that extension.

Answer a phone that is ringing across the office by dialing a code such as 9* and the extension number.

Allows multiple calls to be placed in a queue and answered by the next available operator.

Set up recording of every call made or received on an extension-by-extension basis.

Create a rule that dialing a particular sequence in the course of a call (such as *1) will result in the call being recorded.

Users can access their Call Detail Records through a Web-based User Interface. Missed calls can be viewed and returned directly from the interface, regardless of the IP telephone being used.

Want to know who is calling you when a call is being transferred from the office to your cell phone? Enable Call Screening within your User

Profile and the caller will be prompted to record their name and then the system will call you. When you answer, the system will speak the caller’s name and give you have the option of accepting or rejecting the call.

The Telco Depot IP-PBX can whisper to the user taking the call who or where the call is coming from when they answer.

Caller ID

Caller ID Blocking

Caller ID Customization

Caller ID on Call Waiting

Cell Phone Integration

Conference Bridge

Conference Rooms

Database Integration

Database Store/Retrieval

Dial by Name Directory

Displays the caller’s phone number on the phone’s screen.

Block a call based on the caller’s phone number.

Allows you to customize your outbound caller

ID extension. Note: Some restrictions by carrier may apply.

See the phone number of a second caller while talking to the first caller.

Find Me/Follow Me interface forwards calls to your cell phone and all the functions of the

Telco Depot PBX are available for you to use.

Create a conference call between multiple parties at multiple locations using different phone types; e.g., connect a local extension, remote fixed line, mobile and VoIP connection

– all in one conference.

Bring your customers and employees together by sending an option from your auto attendant or pointing one of your inbound phone numbers to a conference bridge. You can have an unlimited number of callers dialed into the conference bridge from within your phone system. Your only limitation to external callers is based on the amount of phone lines you have set up and available in the phone system.

Internal users or remote extensions can access the conference bridge without tying up any of your available phone lines.

The Asterisk Programmable Interface is kept wide open for the IT staff to integrate the telephone system functions with their database for the purposes of screen pops and other functions. The Telco Depot Technical

Team will also assist in the proper integration development of the database at a nominal charge.

Store call information in a database for later retrieval.

Send callers to a dial-by-name directory where they can dial the first or last name to reach

Direct Inward Dial Numbers (DIDs)

Direct Inward System Access (DISA)

DNIS Routing

Do Not Disturb

E911

Interactive Voice Response (IVR) / Auto

Attendants

Echo Cancellation - OSLEC (Open Source

Line Echo Cancellation)

Extensions (Unlimited)

Extension Range Flexibility any extension in your phone system.

Support for Direct Inward Dialing (phone numbers provided by your VoIP or T1/PRI provider) which allows each person in the company to have their own unique phone number that rings directly to their extension.

A number may also be directly dialed to an extension group, auto attendant or custom routing rule. Take this integration a step further by adding a description to each DID that will be displayed as part of the inbound caller ID for users answering the phone.

The DISA feature can be activated to allow specific employees to dial a pre-configured phone number and provide a pass code. Once entered properly the person calling would have the ability of making an outside call.

Route calls to certain departments or certain locations based on the number the caller dialed.

Incoming calls are automatically routed to voicemail, reception or an alternate extension.

Special handling for Emergency Services

Number, for example, the ability to place an emergency call when phone is locked, etc.

An unlimited number of auto attendant messages and rules are easy to create and manage.

Integrated, field-tested software-based echo canceller.

You can add an extension at any time, with no limits. There are no per user license fees to create an extension.

Configure extension numbers with between 2 and 10 digits.

Extension Groups (a.k.a. Ring Groups)

Fax Support

Fax to Email

Find Me – Follow Me

Hot Dial (a.k.a. Ring Down Phone)

Inbound Call Description

Interactive Directory Listing

Least Cost Routing (LCR, a.k.a. Outbound

Dial Map)

Create and name an unlimited number of extension groups on-the-fly to ring in unison.

Choose to ring that group as an option from an auto attendant or choose to have the group rung directly from inbound numbers. All extensions in the group will ring simultaneously while the caller hears either the standard ring tones or your “on-hold‟ music. The first person to pick up will receive the call.

Connect your current fax machine to the PBX.

VoIP faxing is supported as a best effort service.

Built-in Fax-to-Email engine converts inbound faxes to PDF documents and sends them to a pre-determined email address, whether the source be the company’s main fax number destined for the receptionist, or configured based on DID for employees who require their own individual fax number.

Not working at your desk today? Out of town?

Working from home? Your customers will never know. Simply login to the user interface and the system will look for you at up to four different phone numbers or extensions and then send the voicemail back to your original voicemail box.

When the handset is lifted on an analog or IP

Telephone it will automatically ring a predetermined extension or outside number. This feature is commonly used in hotels, elevators and airport terminals. The dial pad can be disabled for this application.

Place a label or description on the inbound call in order to identify the type of call being received. Helpful when using the Telco Depot

IP PBX to receive calls for multiple companies.

Allows inbound callers to lookup a person’s extension by their name.

The complete outbound dial map allows you to prioritize how local, long distance, international and 911 calls are routed. For example, you may want to use the standard

telephone lines for local calls and when those are unavailable, move to another provider. Or you may want to route your long distance or international calls through a specific provider.

Local and Remote Call Agents

Multiple Music on Hold

Music on Hold

Music on Transfer

OSLEC (Open Source Line Echo Cancellation)

Outbound Dial Map (a.k.a. Least Cost

Routing)

Paging (Integrated)

Staff can log onto the PBX from any phone using a login ID, allowing them to make and take calls as if they were in their office.

For each department, group or company using the PBX you can create an Extension Group and assign each group custom Music On Hold.

No external device is required. Telco Depot IP-

PBX comes standard with a varied selection of message on hold and music tracks.

Plays music when transferring calls between extensions.

See “Echo CancellationEcho CancellationEcho

CancellationEcho Cancellation

See “Least Cost Routing

Paging (Overhead)

Privacy Manager

PSTN or Digital Failover

Remote Call Pickup

Remote Office Support

Page any phone or all phones on the phone system by dialing a paging code.

Integrate with your existing overhead paging system using the Telco Depot Rapid PA connector.

If a remote caller ID is blocked against automatic display, the Privacy Manager prompts the caller to manually enter their phone number, which is then checked against a blacklist or whitelist. The call will then be blocked or permitted as appropriate.

Augment your VoIP strategy with a failover solution. The administrator can easily set outbound dial maps that will automatically allow your T1 PRI or analog lines to take over in the case that your Internet connection or

VoIP provider is down.

Calls can be picked up at a remote location.

Connect phones located in a remote office to

Remote Phones

Remote Linked Servers

Ring Down Phone (a.k.a. Hot Dial)

Ring Groups

Roaming Extensions (a.k.a. Hot Desking)

Route by Caller ID

Skills Based Routing

Speed Dial Numbers

System Diagnostics the office PBX as local extensions.

There is no limit to the amount of Remote

Phones you can set up and no toll charges for extension-to-extension calls, anywhere you have a high speed Internet Connection, so take your IP phone with you when you travel.

Easily link two or more offices together enabling extensions to dial each other as though they were in the next room on the same network (using 3- or 4-digit extension numbers). All traffic is routed over the

Internet via IAX or/and SIP protocol.

See “Hot Dial”

See “Extension Groups” Extension Groups

Individuals are given an extension number rather than phones having an extension. A person logs into the phone in the morning

(using a PIN) and all calls to their extension are then routed through to that phone. Single sign-in is also available, so that logging into

Windows will also log you into the phone next to the computer.

Connect a call to a given extension, call queue, or group of extensions based on the caller’s phone number.

Minimize customer hold time by sending the caller to the agent that is properly trained to handle their query. Transfer callers who require specific handling in a certain area, such as technical support or sales, directly to those agents. Keep the callers in queue if all agents are busy and provide choices to go to another group, supervisor or even have the system call them back.

Creates a speed dial code so that when any phone on the system dials this code, the phone number that you have programmed is automatically dialed.

Provides the administrator with a snapshot view of vitally important system status and

Talk Detection

Three-Way Calling

Time and Date

Time of Day Routing

Transcoding

Trunking

Unified Messaging

User Interface

Voicemail Blast Groups

Voicemail Boxes (Unlimited) usage information.

Detects when a person is talking. Useful for detection of answering machines.

Connects three people into a mini conference call.

Announces the time and date to the caller.

Route incoming calls to a separate auto attendant or call routing rule during off hours

(nights, weekends, holidays).

Conversion between the different voice compression methods.

Connection to PSTN, ITSP or other PBXs via analog or digital lines or via SIP or IAX2 VoIP communication channels.

Define a single DID number to: a) Receive a Fax that can be sent to you as a

PDF document via email b) Locate you at the phone number of your choice c) Leave you a Voicemail message that can be sent to you as a .wav file to your favorite email client.

In addition, you can have a dedicated Fax DID number and a separate DID number to receive voice calls to provide the same functionality at no additional system cost.

Every user is provided a unique Web portal interface to manage specific functions relative to their call preferences. Find Me/Follow Me,

Unified Messaging, Call Recording, Voicemail

.wav files, and personal call history logs.

Supports different languages.

Distribute a single voicemail message to multiple extensions by creating a group of voicemail boxes from any group of extensions on the phone system.

Voicemail boxes are automatically set up for a user when an extension is created. In addition,

Voicemail Bypass

Voicemail Callback

Voicemail Web Access

Voicemail to E-mail

Voicemail Notification via SMS

Voicemail Call Out you can create a voicemail box without attaching an endpoint to the extension

(phantom extensions).

The receptionist on the Telco Depot IP-PBX can transfer the outside caller directly to the voicemail box without forcing him to wait while the extension is rung, saving the outside caller time and frustration.

Caller ID information of the person leaving a voicemail is recorded, allowing the user to choose to call the person back directly from the voicemail box. This comes in very handy when retrieving messages from your cell phone as you can return the call and the person you are calling receives the caller ID of your office extension, and not your cell phone.

Access voicemail messages through the Webbased user interface, both from within the office or outside the office.

Sends voicemail messages as .wav files to the email client of your choosing. Play through your computer’s speakers or via your smart phone.

Sends an SMS message to your cell phone to notify you that you have a new voicemail message in your Telco Depot IP-PBX mailbox.

Details include caller ID, length of the message and the time and date that the message arrived. Note: Requires external SMS server, and development resources for integration.

Program the voicemail system to Call Out to your cell phone when a voicemail message is left in your mailbox. Upon answering you can: a) listen to the message b) call back the party that left the message using a few keystrokes

VoIP Compression The bandwidth required for VoIP connections depends on the method used to transport it.

The standard G.711(u) that ships with Telco

Depot IP-PBX is sufficient in most installations.

This method uses 80 – 100Kbps per simultaneous phone call. The G.729(a) codec is an industry standard that supports placement of more calls in limited bandwidth to utilize IP voice in more cost effective ways.

G.729(a) reduces the call to 25-40Kbps. This compression eliminates the need to replace or upgrade your Internet connection without sacrificing call quality. G.729(a) compression can be installed for a one time license fee of

$20 per the number of simultaneous calls you wish to place. Contact your sales representative for more details.

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement