LG 27MT93S-PR Owner's manual Owner's manual

ENGLISH
OWNER’S MANUAL
LED TV
(CINEMA 3D Smart TV)
LG LED TV applies LCD screen with LED backlights.
Please read this manual carefully before operating the your TV
and retain it for future reference.
27MT93V
27MT93S
www.lg.com
2
TABLE OF CONTENTS
TABLE OF CONTENTS
ENGLISH
3
LICENSES
32 REMOTE CONTROL
4
INSTALLATION PROCEDURE
34 MAGIC REMOTE CONTROL
5
ASSEMBLING AND PREPARING
5
7
9
10
11
11
12
13
14
Unpacking
-Separate purchase
Parts and buttons
Lifting and moving the TV
Setting up the TV
-Attaching the Stand
-Mounting on a table
-Tidying cables
-Detaching the Stand
35
35
35
15
WATCHING TV
15
Turning the TV on for the first time
17
MAKING CONNECTIONS
17
18
19
Connecting an antenna
Satellite connection
Connecting to a HD receiver, DVD, VCR
player or Gaming device
-HDMI connection
-HDMI to DVI connection
-Component connection
-Composite connection
-Euro Scart connection
-Headphone connection
Connecting to a USB
Connecting to a CI Module
MHL connection
Connecting to a wired network
Connecting to a PC
-HDMI connection
-HDMI to DVI connection
19
20
21
22
23
24
25
26
27
28
29
30
31
FUNCTIONS
Registering Magic Remote Control
How to use Magic Remote Control
Precautions to Take when Using the
Magic Remote Control
36 USING THE USER GUIDE
37 MAINTENANCE
37
37
37
37
38
Cleaning Your TV
Screen and frame
Cabinet and stand
Power cord
Preventing “Image burn” or “Burn-in” on
your TV screen
39 IF THE QUALITY OF THE 3D
IMAGE IS NOT ACCEPTABLE,
CHECK THE FOLLOWING
40VIEWING 3D IMAGING
42 TROUBLESHOOTING
42
42
General
Using 3D mode
43 SPECIFICATIONS
LICENSES
3
LICENSES
Manufactured under license from Dolby Laboratories. “Dolby “and the
double-D symbol are trademarks of Dolby Laboratories.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC
in the United States and other countries.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a
subsidiary of Rovi Corporation. This is an official DivX Certified® device that
plays DivX video. Visit divx.com for more information and software tools to
convert your files into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be
registered in order to play purchased DivX Video-on-Demand (VOD) movies.
To obtain your registration code, locate the DivX VOD section in your device
setup menu. Go to vod.divx.com for more information on how to complete
your registration.
DivX Certified® to play DivX® video up to HD 1080p, including premium
content.
DivX®, DivX Certified® and associated logos are trademarks of Rovi
Corporation or its subsidiaries and are used under license.
Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668;
7,515,710; 7,519,274
Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380;
6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the
Symbol, & DTS and the Symbol together are registered trademarks & DTS 2.0
Channel is a trademark of DTS, Inc. Product includes software.
© DTS, Inc. All Rights Reserved.
ENGLISH
Supported licenses may differ by model. For more information of the licenses, visit www.lg.com.
4
INSTALLATION PROCEDURE
INSTALLATION PROCEDURE
ENGLISH
1 Open the package and make sure all the accessories are included.
2 Attach the stand to the TV.
3 Connect an external device to the TV.
NOTE
Image shown may differ from your TV.
yy
Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.
yy
The available menus and options may differ from the input source or product model that you are
yy
using.
New features may be added to this TV in the future.
yy
ASSEMBLING AND PREPARING
5
ASSEMBLING AND PREPARING
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual
product and accessories.
NOTE
The accessories supplied with your product may vary depending on the model.
yy
Product specifications or contents in this manual may be changed without prior notice due to
yy
upgrade of product functions.
CAUTION
Do not use any pirated items to ensure the safety and product life span.
yy
Any damages or injuries by using pirated items are not covered by the warranty.
yy
ENGLISH
Unpacking
6
ASSEMBLING AND PREPARING
ENGLISH
ⱞⳮ
➎Ẳ㞢
EDFN
VPDUW
/Q.MENU
/Q.MENU
ⰶᲳ
YRO
Remote control
Batteries (AAA)
ㄮᗺ
S
Magic Remote Control.
Batteries (AA)
CD (Owner's Manual)/Cards
or
Power Cord
Component video cable
Screw Cover
AC-DC Adapter
Composite audio/video cable
Screws 2 EA
MHL passive cable
Stand Base
Cable holder
or
3D Glasses(Normal type 2 EA)
-The number of 3D glasses may differ depending on the
model or country.
-Image shown may differ from your TV.
Isolator
(Depending on the country)
ASSEMBLING AND PREPARING
7
Separate purchase
VPDUW
/Q.MENU
YRO
S
Dual play glasses
Magic Remote Control
AG-F2**DP, AG-F3**DP
AN-MR400
NOTE
The illustrations in this manual may differ from the actual product and accessories.
yy
Separate purchase items can be changed or modified for quality improvement without any
yy
notification.
Contact your dealer to buying these items.
yy
The model name or design may be changed depending on the upgrade of product
yy
functions,manufacturer’s circumstances or policies.
ENGLISH
EDFN
8
ASSEMBLING AND PREPARING
NOTE
ENGLISH
yy Antenna Isolator Installation Guide
-- Use this to install TV in a place where there is a voltage difference between TV Set and GND
of antenna signal.
»» If there is a voltage difference between TV Set and GND of antenna signal, the antenna
contact might be heated and excessive heat might cause an accident.
-- You can improve the safety when watching TV by efficiently removing power voltage from TV
antenna. It is recommended to mount the isolator to the wall. If it cannot be mounted to the
wall, mount it on the TV. Avoid disconnecting the antenna Isolator after installation.
-- Before starting, be sure that the TV antenna is connected.
1. Connect to TV.
Wall
ANTENNA/
CABLE IN
Cable / Antenna
or
Isolator
2. Connect to Set-Top box.
Connect one end of the isolator to cable/antenna jack and the other to TV set or set-top box.
“Equipment connected to the protective earthing of the building installation through the mains
connection or through other equipment with a connection to protective earthing - and to a
cable distribution system using coaxial cable, may in some circumstances create a fire hazard.
Connection to a cable distribution system has therefore to be provided through a device providing
electrical isolation below a certain frequency range (galvanic isolator, see EN 60728-11)”
When applying the RF Isolator, a slight loss of signal sensitivity can occur.
ASSEMBLING AND PREPARING
9
Parts and buttons
ENGLISH
Remote Control Sensor
Standby Light
yyLighting On: Turned off
yyLighting Off: Turned on
Touch buttons on the
bottom of the TV
COMPONENT IN
AUDIO IN(PC)
HP
(19 V
)
AV2 IN / AUDIO L R
HDMI IN
13/18 V
700 mA Max
LND IN
5V
0.5 A
5V
1.0 A
Connection panel (See p.17)
Touch button
Description
Scrolls through the saved programmes.
Adjusts the volume level.
OK
Selects the highlighted menu option or confirms an input.
SETTINGS
Accesses the main menus, or saves your input and exits the menus.
INPUT
Changes the input source.
/I
Turns the power on or off.
NOTE
All of the buttons are touch sensitive and can be operated through simple touch with your finger.
10
ASSEMBLING AND PREPARING
Lifting and moving the TV
ENGLISH
When moving or lifting the TV, read the following
to prevent the TV from being scratched or
damaged and for save transportation regardless of
its type and size.
When holding the TV, the screen should face
yy
away from you to prevent the screen from
scratches.
CAUTION
Avoid touching the screen at all times, as
this may result in damage to the screen or
some of the pixels used to create images.
It is recommended to move the TV in the
yy
box or packing material that the TV originally
came in.
Before moving or lifting the TV, disconnect
yy
the power cord and all cables.
Hold the top and bottom of the TV frame
yy
firmly. Make sure not to hold the transparent
part, speaker, or speaker grill area.
When transporting the TV, do not expose the
yy
TV to jolts or excessive vibration.
When transporting the TV, keep the TV
yy
upright, never turn the TV on its side, or tilt
towards the left or right.
ASSEMBLING AND PREPARING
11
Setting up the TV
1 Place the TV with the screen side down on a
2 Check the orientation (front and rear) of the
stand base and mount the stand base to the
stand hinge as shown in the figure.
flat and cushioned surface.
3 Fix two screws into the back of the stand base
and close the screw cover.
CAUTION
Lay a foam mat or soft protective cloth
yy
on the surface to protect the screen from
damage.
When attaching the stand to the TV,
yy
place the screen facing down on a
cushioned table or flat surface to protect
the screen from scratches.
CAUTION
Tighten the screws firmly to prevent the TV
from tilting forward. Do not over tighten.
ENGLISH
Attaching the Stand
12
ASSEMBLING AND PREPARING
Mounting on a table
ENGLISH
1 Lift and tilt the TV into its upright position on a
table.
Leave a 10 cm (4 inches) (minimum) space
from the wall for proper ventilation.
10 cm
10 cm
10 cm
10 cm
2 Connect the AC-DC Adapter and Power Cord
to a wall outlet.
CAUTION
Do not place the TV near or on sources of
heat, as this may result in fire or other damage.
ASSEMBLING AND PREPARING
13
WARNING
-5 -5 20 20 -5
ENGLISH
When you adjust the angle, do not hold the buttom of the TV frame as shown on the following
illustration, as may injure your fingers.
:
CAUTION
Tidying cables
Disconnect the power cord first, and then move
or install the TV. Otherwise electric shock may
occur.
1 Attach the cable holder to the edge of stand
body securely.
2 Gather and bind the cables with the supplied cable holder.
NOTE
Tilt from +20 to -5 degrees up or down to
adjust the angle of the TV to suit your view.
-5
20
CAUTION
After attachment, if the cable holder is pulled
with excessive force, it may fall off.
Front
Rear
:
20
:
:
14
ASSEMBLING AND PREPARING
Using the Kensington security system
ENGLISH
The Kensington security system connector is
located at the back of the TV. For more information
of installation and using, refer to the manual
supplied with the Kensington security system or
visit http://www.kensington.com .
Detaching the Stand
1 Place the TV with the screen side down on a
flat and cushioned surface.
Connect the Kensington security system cable
between the TV and a table.
CAUTION
NOTE
Lay a foam mat or soft protective cloth
yy
on the surface to protect the screen from
damage.
When detaching the stand to the TV,
yy
place the screen facing down on a
cushioned table or flat surface to protect
the screen from scratches.
The Kensington security system is optional.
You can obtain additional accessories from
most electronics stores.
2 Open the screw cover on the back of the stand
base and use a screwdriver to remove the two
screws.
Detach the stand base from the stand hinge as
shown in the figure.
WATCHING TV
15
WATCHING TV
When you access the TV for the first time, the initial setting screen appears. Select a language and
customize the basic settings.
1 Connect the power cord to a power outlet.
2 Press
on the TV or power button on the remote control to turn the TV on.
The Standby Light is turned off.
3 The initial setting screen appears if you access the TV for the first time.
NOTE
If you do not operate the TV within 40 seconds when the setting menu screen appears, the setting
menus will disappear.
4 Follow the on-screen instructions to customize your TV according to your preferences.
NOTE
For those countries without confirmed DTV broadcasting standards, some DTV features might not
yy
work, depending on the DTV broadcasting environment.
When France is selected for Country, the initial password is not ‘0’, ‘0’, ‘0’, ‘0’ but ‘1’, ‘2’, ‘3’, ‘4’.
yy
To display images in the best quality for your home environment, select Home Use mode.
yy
Store Demo mode is suitable for the retail environment.
yy
If you select Store Demo mode, the previously customized settings will switch to the default
yy
settings of Store Demo mode in 5 minutes.
ENGLISH
Turning the TV on for the first time
16
WATCHING TV
5 When the basic settings are complete, press OK.
ENGLISH
NOTE
If you do not complete the initial setting, it will appear whenever you access the TV.
6 To turn the TV off, press
on the TV.
The Standby Light is turned on.
CAUTION
Disconnect the power cord from the power outlet when you do not use the TV for a long period of
time.
NOTE
You can also access Factory Reset by accessing OPTION in the main menus.
MAKING CONNECTIONS
17
MAKING CONNECTIONS
NOTE
If you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal input
yy
cable to the TV through a DVD recorder or VCR. For more information about recording, refer to the
manual supplied with the connected device.
The external device connection may differ from the model.
yy
Connect external devices to the TV regardless of the order of the TV port.
yy
Connecting an antenna
Connect an antenna, cable or cable box to watch TV referring to the following. The illustrations may differ
from the actual accessories and an RF cable is optional.
Connect the TV to a wall antenna socket with an RF cable (75 Ω).
(Not Provided)
Outdoor Antenna
VHF Antenna
yy
UHF Antenna
yy
Wall Antenna Socket
NOTE
Use a signal splitter to use more than 2 TVs.
yy
If the image quality is poor, install a signal
yy
amplifier properly to improve the image
quality.
If the image quality is poor with an antenna
yy
connected, aim the antenna to the proper
direction.
Visit http://AntennaWeb.org for more
yy
information about the antenna and cable
connection.
CAUTION
Make sure not to bend the copper wire of
yy
the RF cable.
Copper wire
Complete all connections instructions
yy
between devices, and then connect the
power cord to the power outlet to prevent
damages to your TV.
ENGLISH
Connect various external devices to the TV and switch input modes to select an external device. For more
information about an external device’s connection, refer to the manual supplied with each device.
Available external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC,
camcorders or cameras, gaming devices, and other external devices.
18
MAKING CONNECTIONS
Satellite connection
ENGLISH
Connect the TV to a satellite dish to a satellite socket with a satellite RF cable (75 Ω).
13/18 V
700 mA Max
LND IN
(Not Provided)
MAKING CONNECTIONS
19
Connecting to a HD receiver, DVD, VCR player or Gaming device
HDMI connection
HDMI is the best way to connect a device.
Transmits the digital video and audio signals from an external device to the TV. Connect the external device
and the TV with the HDMI cable as shown on the following illustration.
NOTE
Use a High Speed HDMI™ Cable.
yy
High Speed HDMI™ Cables are tested to carry an HD signal up to 1080p and higher.
yy
Supported DTV Audio: MPEG, Dolby Digital.
yy
Supported HDMI Audio format: DTS, Dolby Digital, PCM (Up to 192 KHz,
yy
32k/44.1k/48k/88k/96k/176k/ 192k.)
Choose any HDMI input port to connect.
yy
It does not matter which port you use.
yy
DVD / Blu-Ray / HD Cable Box / HD STB /
Gaming device
(Not Provided)
COMPONENT IN
AUDIO IN(PC)
HP
(19 V
)
AV2 IN / AUDIO L R
HDMI IN
13/18 V
700 mA Max
LND IN
5V
0.5 A
5V
1.0 A
ENGLISH
Connect a HD receiver, DVD, VCR player or Gaming device to the TV and select an appropriate input mode.
20
MAKING CONNECTIONS
HDMI to DVI connection
ENGLISH
Transmits the digital video signal from an external device to the TV. Connect the external device and the TV
with the HDMI to DVI cable as shown in the following illustration. To transmit an audio signal, connect an
optional audio cable.
NOTE
If you do not use an optional external speaker, connect the external device to the TV with the optional
audio cable.
DVD / Blu-Ray / HD Cable Box /
HD STB / Gaming device
(Not Provided)
COMPONENT IN
AUDIO IN(PC)
HP
(19 V
)
AV2 IN / AUDIO L R
HDMI IN
13/18 V
700 mA Max
LND IN
5V
0.5 A
5V
1.0 A
MAKING CONNECTIONS
21
Component connection
NOTE
If cables are installed incorrectly, it could case the image to display in black and white or with distorted
yy
color.
Check to ensure the cable are matched with the corresponding color connection.
yy
COMPONENT IN
AUDIO IN(PC)
HP
(19 V
)
AV2 IN / AUDIO L R
HDMI IN
13/18 V
700 mA Max
LND IN
5V
(Use the component
video cable provided)
0.5 A
5V
1.0 A
(Use the composite
audio/video cable provided)
(Not Provided)
DVD / Blu-Ray / HD Cable Box /
HD STB / Gaming device
(Not Provided)
ENGLISH
Transmits the analog video and audio signals from an external device to the TV. Connect the external
device and the TV with the component cable as shown on the following illustration. To display images by
using progressive scan, make sure to use the component cable.
22
MAKING CONNECTIONS
Composite connection
ENGLISH
Transmits the analog video and audio signals from an external device to the TV. Connect the external
device and the TV with the composite cable as shown on the following illustration.
NOTE
Check to ensure the cable are matched with the corresponding color connection.
COMPONENT IN
AUDIO IN(PC)
HP
(19 V
)
AV2 IN / AUDIO L R
HDMI IN
13/18 V
700 mA Max
LND IN
5V
0.5 A
5V
1.0 A
(Use the composite
audio/video cable provided)
(Not Provided)
DVD / Blu-Ray / HD Cable Box /
HD STB / Gaming device
MAKING CONNECTIONS
23
Euro Scart connection
Output Type AV1 (TV Out1)
AV1 (When DTV scheduled recording is in progress using
recording equipment.)
Current
input mode
Digital TV
Digital TV
O
Analogue TV,
AV
Analogue TV
O (The input mode is converted to DTV.)
Component
HDMI
1 TV Out : Outputs Analogue TV or Digital TV signals.
NOTE
Any Euro scart cable used must be signal shielded.
yy
When watching digital TV in 3D imaging mode, TV out signals cannot be output through the SCART
yy
cable.
If you set the 3D mode to On while a scheduled recording is performed on digital TV, monitor out
yy
signals cannot be output through the SCART cable, and the recording cannot be performed.
COMPONENT IN
AUDIO IN(PC)
HP
(19 V
)
AV2 IN / AUDIO L R
HDMI IN
1
13/18
V
700 mA Max
7
LND IN
L
5V
0.5 A
5V
1.0 A
(Not Provided)
DVD / Blu-Ray / HD Cable Box
ENGLISH
Transmits the video and audio signals from an external device to the TV. Connect the external device
and the TV with the Euro Scart cable as shown on the following illustration. To display images by using
progressive scan, make sure to use the Euro Scart cable.
24
MAKING CONNECTIONS
Headphone connection
ENGLISH
Transmits the headphone signal from the TV to an external device. Connect the TV with the headphone as
shown on the following illustration.
NOTE
AUDIO menu items are disabled when connecting a headphone.
yy
When changing AV MODE with a headphone connected, the change is applied to video but not to
yy
audio.
Headphone impedance: 16
yy
Max audio output of headphone: 10 mW to 15 mW
yy
Headphone jack size: 0.35 cm
yy
COMPONENT IN
AUDIO IN(PC)
HP
(19 V
)
AV2 IN / AUDIO L R
HDMI IN
13/18 V
700 mA Max
LND IN
5V
(Not Provided)
Headphone
0.5 A
5V
1.0 A
MAKING CONNECTIONS
25
Connecting to a USB
NOTE
Some USB Hubs may not work. If a USB device connected using a USB Hub is not detected, connect
yy
it to the USB port on the TV directly.
COMPONENT IN
AUDIO IN(PC)
HP
(19 V
)
AV2 IN / AUDIO L R
HDMI IN
13/18 V
700 mA Max
LND IN
5V
0.5 A
5V
USB
(Not Provided)
1.0 A
ENGLISH
Connect a USB storage device such as s USB flash memory, external hard drive, MP3 player or a USB
memory card reader to the TV and access the USB menu to use various multimedia files.
26
MAKING CONNECTIONS
Connecting to a CI Module
ENGLISH
View the encrypted (pay) services in digital TV mode. This feature is not available in all countries.
NOTE
Check if the CI module is inserted into the PCMCIA card slot in the right direction. If the module is
yy
not inserted properly, this can cause damage to the TV and the PCMCIA card slot.
If the TV does not display any video and audio when CI+ CAM is connected, please contact to the
yy
Terrestrial/Cable/Satellite Service Operator.
(Not Provided)
PCMCIA Card
MAKING CONNECTIONS
27
MHL connection
NOTE
Connect the mobile phone to the HDMI IN 1(MHL) port to view the phone screen on the TV.
yy
The MHL passive cable is needed to connect the TV and a mobile phone.
yy
This only works for the MHL-enabled phone.
yy
Some applications can be operated by the remote control.
yy
For some mobile phones supporting MHL, you can control with the magic remote control.
yy
Remove the MHL passive cable from the TV when:
yy
- the MHL function is disabled
- your mobile device is fully charged instandby mode
COMPONENT IN
AUDIO IN(PC)
HP
(19 V
)
AV2 IN / AUDIO L R
HDMI IN
13/18 V
700 mA Max
LND IN
5V
0.5 A
5V
1.0 A
Mobile phone
ENGLISH
Mobile High-definition Link (MHL) is an interface for transmitting digital audiovisual signals from mobile
phones to television sets.
28
MAKING CONNECTIONS
Connecting to a wired network
ENGLISH
Connect the TV to a local area network (LAN) via the LAN port as shown on the following illustration
and set up the network settings. After making a physical connection, a small number of home networks
may require the TV network settings to be adjusted. For most home networks, the TV will connect to
automatically without any adjustments.
For detail information, contact your internet provider or router manual.
CAUTION
Do not connect a modular phone cable to the LAN port.
yy
Since there are various connection methods, please follow the specifications of your
yy
telecommunication carrier or internet service provider.
COMPONENT IN
AUDIO IN(PC)
HP
(19 V
)
AV2 IN / AUDIO L R
HDMI IN
13/18 V
700 mA Max
LND IN
5V
0.5 A
(Not Provided)
5V
1.0 A
MAKING CONNECTIONS
29
Connecting to a PC
* Plug & Play: The function when a PC recognizes a connected device that users connect to a PC and turn
on, without device configuration or user intervention.
NOTE
It is recommended to use the TV with the HDMI connection for the best image quality.
yy
If you do not use an optional external speaker, connect the PC to the TV with the optional audio
yy
cable.
If you turn the TV on when the set becomes cold, the screen may flicker. This is normal.
yy
Some red, green, or blue spots may appear on the screen. This is normal.
yy
Do not press the screen with your finger for a long time as this may result in temporary distortion on
yy
the screen.
Avoid displaying a fixed image on the screen for a long period of time to prevent image burn. Use a
yy
screensaver if possible.
If you want to use HDMI-PC mode, you must set the input label to PC mode.
yy
ENGLISH
Your TV supports the Plug & Play* feature and has the built-in speakers with Virtual Surround that
reproduces sound clearly with a rich bass.
30
MAKING CONNECTIONS
HDMI connection
ENGLISH
Transmits the digital video and audio signals from your PC to the TV. Connect the PC and the TV with the
HDMI cable as shown in the following illustrations. You should set PC as an input label to connect the PC to
the TV with an HDMI connection.
NOTE
Use a High Speed HDMI™ Cable.
yy
High Speed HDMI™ Cables are tested to carry an HD signal up to 1080p and higher.
yy
If you want to use HDMI-PC mode, you must set the input label to PC mode.
yy
Supported DTV Audio: MPEG, Dolby Digital.
yy
Supported HDMI Audio format: DTS, Dolby Digital, PCM(Up to 192 KHz,
yy
32k/44.1k/48k/88k/96k/176k/ 192k.)
Choose any HDMI input port to connect.
yy
It does not matter which port you use.
yy
PC
(Not Provided)
COMPONENT IN
AUDIO IN(PC)
HP
(19 V
)
AV2 IN / AUDIO L R
HDMI IN
13/18 V
700 mA Max
LND IN
5V
0.5 A
5V
1.0 A
MAKING CONNECTIONS
31
HDMI to DVI connection
NOTE
If you want to use HDMI-PC mode, you must set the input label to PC mode.
yy
If you do not use an optional external speaker, connect the PC to the TV with the optional audio cable.
yy
PC
(Not Provided)
COMPONENT IN
AUDIO IN(PC)
HP
(19 V
)
AV2 IN / AUDIO L R
HDMI IN
13/18 V
700 mA Max
LND IN
5V
0.5 A
5V
1.0 A
ENGLISH
Transmits the digital video signal from your PC to the TV. Connect the PC and the TV with the HDMI to DVI
cable as shown the following illustrations. To transmit an audio signal, connect an optional audio cable.
32
REMOTE CONTROL
REMOTE CONTROL
ENGLISH
The descriptions in this manual are based on the buttons of the remote control. Please read this manual
carefully and use the TV correctly.
To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching
and
ends to the
label inside the compartment, and close the battery cover.
To remove the batteries, perform the installation actions in reverse.
CAUTION
Do not mix old and new batteries, as this may
damage the remote control.
Make sure to point the remote control to the remote control sensor on the TV.
Image shown may differ from your TV.
(POWER)
Turns the TV on or off.
Q.MENU
Accesses the quick menus.
TV/RAD
Selects Radio, TV and DTV
programme.
INPUT
Selects the input mode.
SUBTITLE
2.&/6
*/'0
GUIDE
Shows programme guide.
INFO
Views the information of the
currently program and the screen.
Number buttons
Enters numbers.
Q.VIEW
Returns to the previously
viewed programme.
LIST
Displays the programme
table.
+
-
Adjusts the volume level.
PAGE
P
Selects a programme.
PAGE
Moves to the previous or next
screen.
FAV
Displays the selected
favourite programme.
3D
Uses for viewing 3D video.
MUTE
Mutes all sounds.
REMOTE CONTROL
33
ENGLISH
SMART
Accesses the HOME menu.
Navigation buttons
Scrolls through menus or
options.
OK
Selects menus or options and
confirms your input.
Teletext buttons
These buttons are used for
teletext.
APP/*
Select the MHP TV
menu source. (Only Italy)
(Depending on model)
"11
MY APPS
4."35
BACK
Returns to the previous level.
-*7&57
MY APPS
Shows the list of Apps.
EXIT
Clears all on-screen displays
and return to TV viewing.
3&$
SETTINGS
Accesses the main menus.
REC
Start to record and display
record menu.
Control buttons
Controls the SIMPLINK
compatible devices (USB,
SIMPLINK).
Coloured buttons
These access special
functions in some menus.
NOTE
On MHEG channel, you cannot adjust the backlight with the yellow or blue key.
34
MAGIC REMOTE CONTROL FUNCTIONS
MAGIC REMOTE CONTROL FUNCTIONS
ENGLISH
When the message “Magic Remote Control battery is low. Change the battery.” is displayed, replace the
battery.
To replace batteries, open the battery cover, replace batteries (1.5 V AA) matching
and
ends to the
label inside the compartment, and close the battery cover. Be sure to point the remote control toward the
remote control sensor on the TV.
To remove the batteries, perform the installation actions in reverse.
CAUTION
Do not mix old and new batteries, as this may
damage the remote control.
Pointer (RF transmitter)
(POWER)
Turns the TV on or off.
Navigation buttons (up/down/left/
right)
Scrolls through menus or options.
BACK
Returns to the previous level.
BACK
Wheel(OK)
Selects menus or options and
confirms your input.
Scrolls through the saved
programmes.
If you press the navigation button
while moving the pointer on the
screen, the pointer disappears, and
the Magic Remote Control works
as a regular remote control.
To display the pointer again, shake
the Magic Remote Control from
side to side.
SMART
SMART
Accesses the Smart Home menus.
/Q.MENU
P
/Q.MENU
Accesses the quick menus.
Accesses the Universal Control.
+
Adjusts the volume level.
ꕌPꕍ
Scrolls through the saved
programmes or channels.
MUTE
Mutes all sounds.
3D
Used for viewing 3D video.
3
Voice recognition
1
If you press Wheel(OK) on the Magic Remote
Control, the following screen appears.
Shows information about the current programmes
and screen.
2
Pressing this button will display number keypad
which you can select programme number.
3
You can select My Apps Menu.
MAGIC REMOTE CONTROL FUNCTIONS
It is necessary to ‘pair’ (register) the magic remote
control to your TV before it will work.
How
the Magic Remote Control
BACK to register
HOME
P
MY APPS
1 To register automatically,
turn the TV on and press the
Wheel(OK) button. When
registration is completed, the
completion message appears
on the screen.
2If registration fails, turn the TV
off and back on, then press
the Wheel(OK) button to
complete registration.
How to re-register the Magic Remote Control
BACK
SMART
1 Press and hold the BACK
and SMART buttons
together for 5 seconds to
reset, then register it by
following “How to register the
Magic Remote Control” above.
2To re-register the Magic
Remote Control, press and
hold the BACK button for 5
seconds toward the TV. When
registration is completed, the
completion message appears
on the screen.
How to use Magic Remote
Control
1 If the pointer disappears, move
the Magic Remote Control
slightly to left or right. Then,
it will automatically appear on
the screen.
»» If the pointer has not been
used for a certain period of time, it
will disappear.
2You can move the pointer by
aiming the Pointer Receiver of
the Magic Remote Control at
your TV then move it left, right,
up or down.
»» If the pointer does not work
properly, leave the Magic Remote
Control for 10 seconds then use it
again.
Precautions to Take when
Using the Magic Remote
Control
Use the Magic Remote Control within the
yy
maximum communication distance (10 m).
Using the Magic Remote Control beyond this
distance, or with an object obstructing it, may
cause a communication failure.
A communication failure may occur due to
yy
nearby devices. Electrical devices such as a
microwave oven or wireless LAN product may
cause interference, as these use the same
bandwidth (2.4 GHz) as the Magic Remote
Control.
The Magic Remote Control may be damaged
yy
or may malfunction if it is dropped or
receives a heavy impact.
Take care not to bump into nearby furniture
yy
or other people when using the Magic
Remote Control.
Manufacturer and installer cannot provide
yy
service related to human safety as the
applicable wireless device has possibility of
electric wave interference.
It is recommended that an Access Point (AP)
yy
be located more than 1 m away from the
TV. If the AP is installed closer than 1 m, the
Magic Remote Control may not perform as
expected due to frequency interference.
ENGLISH
Registering Magic Remote
Control
35
36
USING THE USER GUIDE
USING THE USER GUIDE
ENGLISH
User Guide allows you to more easily access the detailed TV information.
Image shown may differ from your TV.
yy
1 Press the SMART
button to access the
Smart Home menu.
OPTION > To set language
2 Select User Guide and press Wheel(OK).
1
SMART  Settings  OPTION  Language
Selects Menu Language and Audio Language displayed on the screen.
Menu Language Selects a language for the display text.
[In Digital Mode Only]
Audio Language When watching a digital broadcast containing several audio
languages, you can select the language you want.
[In Digital mode Only]
Use the Subtitle function when two or more subtitle
Subtitle
languages are broadcast.
Language
✎ If subtitle data in a selected language is not broadcast,
the default language subtitle will be displayed.
Try Now
2
Close
User Guide

Shows the description of the selected menu.
You can use
to move between pages.
2 Moves to the selected menu directly from
the User Guide.
1
User Guide
User Guide
3
1
To use input device
To set time options
PROGRAMME Setting
To set TV lock options
PICTURE, SOUND Setting
To set language
OPTION
To set country
LG SMART Function
Disabled Assisstance
Advanced Function
Information
2
To set Magic remote control
Index
4
Online User Guide
5
1
Shows the current watching programme or
input source screen.
2
Allows to select the category you want.
3
Allows to select the item you want.
You can use ꕌ/ꕍto move between pages.
4
Allows to browse the description of the
function you want from the index.
5
Provides the detailed information on the
functions of LG Smart TV when the Internet
is connected.
(It may not be available depending on the
country/language.)
MAINTENANCE
37
MAINTENANCE
Clean your TV regularly to keep the best performance and to extend the product lifespan.
CAUTION
Make sure to turn the power off and disconnect the power cord and all other cables first.
yy
When the TV is left unattended and unused for a long time, disconnect the power cord from the wall
yy
outlet to prevent possible damage from lightning or power surges.
Screen and frame
To remove dust, wipe the surface with a dry and soft cloth.
To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild
detergent. Then wipe immediately with a clean and dry cloth.
CAUTION
Do not push, rub, or hit the surface with your fingernail or a sharp object, as this may result in
yy
scratches on the screen and image distortions.
Do not use any chemicals, such as waxes, benzene, alcohol, thinners, insecticides, air fresheners,
yy
lubricants, as these may damage the screen’s finish and cause discolorations.
Cabinet and stand
To remove dust, wipe the cabinet with a dry and soft cloth.
To remove major dirt, wipe the cabinet with a soft cloth dampened in a clean water or water containing a
small amount of mild detergent.
CAUTION
Do not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock, or
yy
malfunction.
Do not use any chemicals as this may deteriorate the surface.
yy
Power cord
Remove the accumulated dust or dirt on the power cord regularly.
ENGLISH
Cleaning Your TV
38
MAINTENANCE
Preventing “Image burn” or “Burn-in” on your TV screen
ENGLISH
If a fixed image displays on the TV screen for a long period of time, it will be imprinted and become
yy
a permanent disfigurement on the screen. This is “image burn” or “burn-in” and not covered by the
warranty.
If the aspect ratio of the TV is set to 4:3 for a long period of time, image burn may occur on the
yy
letterboxed area of the screen.
Avoid displaying a fixed image on the TV screen for a long period of time (2 or more hours for LCD/
yy
LED) to prevent image burn.
3D
39
ENGLISH
IF THE QUALITY OF THE 3D IMAGE IS NOT
ACCEPTABLE, CHECK THE FOLLOWING
1) Viewing distance
For optimal 3D viewing distance, please see the table below.
Please maintain the optimal viewing distance for the best 3D experience.
2) Viewing angle
For optimal 3D viewing angles, see the table below.
3) Check the 3D display sequence (L-R, R-L)
The display method may vary due to the 3D content type. Try changing the display method to L-R or
R-L for a better viewing experience
Remain at the optimal viewing
distance from the Cinema 3D
TV.
Adjust the Cinema 3D TV
angle and your position to
achieve the optimal viewing
angle.
Adjust the position of the screen
to minimise reflections.
Keep your lower arms
horizontal and gently rest
your hands on the keyboard.
Model
Mode
Dimension
Monitor's allowed 3D
viewing distance
27MT93V
27MT93S
When
viewing 3D
images
69.0 cm
55 cm to 500 cm
Monitor's
optimal
3D viewing
distance
Optimal
viewing
angle
100 cm
12 °
40
3D
VIEWING 3D IMAGING
ENGLISH
WARNING
Viewing Environment
yy Viewing Time
-- When watching 3D contents, take 5 - 15 minute breaks every hour. Viewing 3D contents for a long
period of time may cause headache, dizziness, fatigue or eye strain.
Viewing Age
yy Infants/Children
-- Usage/ Viewing 3D contents for children under the age of 5 are prohibited.
-- Children under the age of 10 may overreact and become overly excited because their vision is in
development (for example: trying to touch the screen or trying to jump into it. Special monitoring
and extra attention is required for children watching 3D contents.
-- Children have greater binocular disparity of 3D presentations than adults because the distance
between the eyes is shorter than one of adults. Therefore they will perceive more stereoscopic
depth compared to adults for the same 3D image.
yy Teenagers
-- Teenagers under the age of 19 may react with sensitivity due to stimulation from light in 3D
contents. Advise them to refrain from watching 3D contens for a long time when they are tired.
yy Elderly
-- The elderly may perceive less 3D effect compared to the youth. Do not sit closer to the TV than the
recommended distance.
Those that have a photosensitive seizure or chronic illness
yy Some users may experience a seizure or other abnormal symptoms when they are exposed to a
flashing light or particular pattern from 3D contents.
yy Do not watch 3D videos if you feel nausea, are pregnant and/ or have a chronic illness such as epilepsy,
cardiac disorder, or blood pressure disease, etc.
yy 3D Contents are not recommended to those who suffer from stereo blindness or stereo anomaly.
Double images or discomfort in viewing may be experienced.
yy If you have strabismus (cross-eyed), amblyopia (weak eyesight) or astigmatism, you may have trouble
sensing depth and easily feel fatigue due to double images. It is advised to take frequent breaks than
the average adult.
yy If your eyesight varies between your right and left eye, revise your eyesight prior to watching 3D
contents.
Symptoms which require discontinuation or refraining from watching 3D contents
yy Do not watch 3D contents when you feel fatigue from lack of sleep, overwork or drinking.
yy When these symptoms are experienced, stop using/watching 3D contents and get enough rest until
the symptom subsides.
-- Consult your doctor when the symptoms persist. Symptoms may include headache, eyeball pain,
dizziness, nausea, palpitation, blurriness, discomfort, double image, visual inconvenience or fatigue.
3D
41
CAUTION
yy Viewing Distance
- Maintain a distance of at least twice the screen diagonal length when watching 3D contents. If you
feel discomfort in viewing 3D contents, move further away from the TV.
Cautions when using the 3D glasses
yy Make sure to use LG 3D glasses. Otherwise, you may not be able to view 3D videos properly.
yy Do not use 3D glasses instead of your normal glasses, sunglasses or protective goggles.
yy Using modified 3D glasses may cause eye strain or image distortion.
yy Do not keep your 3D glasses in extremely high or low temperatures. It will cause deformation.
yy The 3D glasses are fragile and are easy to be scratched. Always use a soft, clean piece of cloth when
wiping the lenses. Do not scratch the lenses of the 3D glasses with sharp objects or clean/wipe them
with chemicals.
ENGLISH
Viewing Environment
42
TROUBLESHOOTING
TROUBLESHOOTING
ENGLISH
General
Problem
Resolution
Cannot control the TV with
the remote control.
yy Check the remote control sensor on the product and try again.
yy Check if there is any obstacle between the product and the remote control.
yy Check if the batteries are still working and properly installed ( to , to ).
No image display and no
sound is produced.
yy Check if the product is turned on.
yy Check if the power cord is connected to a wall outlet.
yy Check if there is a problem in the wall outlet by connecting other products.
The TV turns off suddenly.
yy Check the power control settings. The power supply may be interrupted.
yy Check if the Auto sleep feature is activated in the Time settings.
yy If there is no signal while the TV is on, the TV will turn off automatically after
15 minutes of inactivity.
Using 3D mode
Problem
Resolution
If you can see a swirling oil-like
pattern on the TV when the TV is
turned off.
This is caused by the interference of external light in the air layer between the
LCD/LED surface and 3D filter. The pattern becomes almost invisible when you
turn on the power again.
If you are not using the glasses
provided with the TV.
When you view 3D images with this TV, it is very important that you use the
glasses provided with the TV. The glasses are designed to compensate optically
for the 3D filter attached to the surface of the TV. If you wear third-party glasses,
you may not see 3D images properly on the TV.
If you view 3D images outside the
optimal viewing angle or distance.
When you view 3D images outside the optimal viewing angle or viewing distance,
the images may look overlapped or not be displayed properly in 3D.
Notes for Viewing 3D Image with 3D Digital Brodcating
*In Analogue Brodcating, 3D Imaging does not work.
Problem
When switching the 2D image
display to the 3D image display
with the 3D button on the remote
control, the overlapped image may
be displayed.
Resolution
yy Disable the 3D imaging mode with the 3D button.
y
If the screen is divided into left/right This channel supports the 3D imaging mode. Select the 3D imaging type
or top/bottom when you change the displayed on the screen by pressing the 3D button on the remote control.
channel
If your eyes are sore or the screen
looks blurry while viewing 3D
images.
Select Left/Right or Right/Left option, which you find better for viewing 3D
images.
SPECIFICATIONS
43
SPECIFICATIONS
Wireless LAN module(TWFM-B006D) specification
Standard
Frequency Range
Modulation
IEEE802.11a/b/g/n
2400 to 2483.5 MHz
5150 to 5250 MHz
CCK / OFDM / MIMO
802.11a: 11 dBm
Output Power
(Typical)
802.11b: 15 dBm
802.11g: 13 dBm
802.11n - 2.4GHz: 13 dBm
802.11n - 5GHz: 13 dBm
802.11a/g: 54 Mbps
Data rate
802.11b: 11 Mbps
802.11n: 300 Mbps
Antenna Gain
(Typical)
Occupied bandwidth
2400 to 2483.5 MHz: 2.5dBi
5150 to 5250 MHz: 2.2dBi
802.11a/b/g: HT20
802.11n: HT20/40
yy Because band channel used by the country could be different, the user can not change or adjust the operating
frequency and this product is set for the regional frequency table.
Bluetooth module (BM-LDS401) specification
Standard
Bluetooth Version 3.0
Frequency Range
2400 ~ 2483.5 MHz
Output Power (Max.)
Data rate (Max.)
Communication Distance
10 dBm or lower
3 Mbps
Line of Open Sight approx. 10 m
ENGLISH
Product specifications may be changed without prior notice due to upgrade of product functions.
44
SPECIFICATIONS
ENGLISH
Television system
Digital TV
Analogue TV
DVB-T(*DVB-T/T2)
DVB-C
DVB-S/S2
PAL/SECAM B/G/I/D/K
SECAM L/L’
Programme coverage VHF, UHF
C-Band, Ku-Band
VHF: E2 to E12,
UHF : E21 to E69,
CATV: S1 to S20,
HYPER: S21 to S47
Maximum number of DVB-S/S2 : 6,000
storable programmes DVB-T/T2/C & Analogue TV : 1,500
* : Only DVB-T2 support models
Panel
Video Signal
Screen Type
690 mm Wide (27 inch)
Visible diagonal size : 690 mm
Pixel Pitch
0.3114 mm (H) x 0.3114 mm (V)
Max. Resolution
1920 × 1080 @ 60 Hz
Recommended Resolution 1920 × 1080 @ 60 Hz
Horizontal Frequency
30 kHz to 83 kHz
Vertical Frequency
58 Hz to 62 Hz
Synchronization Type
Digital
Input Connector
Power
TV, PC Audio In, Component, AV1(SCART), AV2(CVBS),
HDMI*2, USB*3, PCMCIA, LAN JACK
Rated Voltage
19 V
Power Consumption
On Mode : 38 W (typ.)
Off Mode
0.5 W
AC/DC Adapter
Tilt
3.2 A
Manufacturer: LG Innotek, Model PSAB-L206A
Tilt Range
Dimensions (Width x Depth x Height)
Weight
-5 to 20°
With Stand
622.1 mm x 208.4 mm x 437.8 mm
5.2 kg
Without Stand
622.1 mm x 66.8 mm x 373.7 mm
4.7 kg
Environmental
conditions
Operating Temperature
Operating Humidity
10 °C to 35 °C
20 % to 80 %
Storage Temperature
Storage Humidity
-10 °C to 60 °C
5 % to 90 %
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
45
SPECIFICATIONS
Component port connecting information
HDMI (PC) supported mode
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
640 x 350
31.468
70.090
720 x 400
31.469
70.080
Y
PB
PR
Y
B-Y
R-Y
Y
Cb
Cr
Y
Pb
Pr
640 x 480
31.469
59.940
800 x 600
37.879
60.317
1024 x 768
48.363
60.004
1152 x 864
54.348
60.053
1360 x 768
47.712
60.015
1280 x 1024
63.981
60.020
1920 x 1080
67.500
60.000
HDMI (DTV) supported mode
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
720X480
31.469
31.500
59.940
60.000
720X576
31.250
50.000
1280X720
37.500
44.960
45.000
50.000
59.940
60.000
1920X1080
33.720
33.750
28.125
26.970
27.000
33.716
33.750
56.250
67.430
67.500
59.940
60.000
50.000
23.970
24.000
29.976
30.000
50.000
59.940
60.000
Resolution
Component ports on the
TV
Video output ports
on DVD player
Y
PB
Signal
Component
480i/576i
O
480p/576p
O
720p/1080i
O
1080p
O
(50 Hz / 60 Hz only)
PR
ENGLISH
Resolution
46
SPECIFICATIONS
NOTE
ENGLISH
Avoid keeping a fixed image on the set’s screen for prolonged periods of time. The fixed image may
yy
become permanently imprinted on the screen. Use a screen saver when possible.
There may be interference relating to resolution, vertical pattern, contrast or brightness in PC mode.
yy
Change the PC mode to another resolution or change the refresh rate to another rate or adjust the
brightness and contrast on the menu until the picture is clear. If the refresh rate of the PC graphic
card can not be changed, change the PC graphic card or consult the manufacturer of the PC graphic
card.
The synchronization input waveform for Horizontal and Vertical frequencies are separate.
yy
Connect the audio cable from the PC to the Audio input on the TV. (Audio cables are not included
yy
with the TV).
If using a sound card, adjust PC sound as required.
yy
DOS mode may not work depending on the video card if you use an HDMI to DVI cable.
yy
SPECIFICATIONS
47
3D supported mode
The method for 3D digital broadcast may differ depending on the signal environment. If video is not
yy
switched automatically into 3D, manually convert the settings to view 3D images.
3D supported mode automatically
Input
Signal
640 X 480
480p
576p
720p
HDMI
1080i
1080p
Horizontal
Frequency (kHz)
Vertical
Frequency (Hz)
Top & Bottom,
Side by Side(Half), Side by Side(Full)
31.469 / 31.5
62.938 / 63
31.469 / 31.5
59.94 / 60
62.5
50
37.50
50
44.96 / 45
59.94 / 60
75
50
89.91 / 90
59.94 / 60
28.125
50
33.72 / 33.75
59.94 / 60
56.25
50
67.5
59.94 / 60
26.97 / 27
23.97 / 24
28.125
25
33.72 / 33.75
29.976 / 30
43.94 / 54
23.97 / 24
56.25
25
67.432 / 67.5
29.976 / 30
56.25
50
67.432 / 67.5
59.94 / 60
USB
1080p
33.75
30
DLNA
1080p
33.75
30
DTV
Frame Packing, Line Alternative
Top & Bottom,
Side by Side(Half), Side by Side(Full)
Frame Packing, Line Alternative
62.938 / 63
31.25
Playable 3D video format
Top & Bottom,
Side by Side(Half), Side by Side(Full)
Frame Packing, Line Alternative
Top & Bottom,
Side by Side(Half), Side by Side(Full)
Frame Packing, Line Alternative
Top & Bottom,
Side by Side(Half), Side by Side(Full)
Frame Packing, Field Alternative
Top & Bottom,
Side by Side(Half), Side by Side(Full)
Frame Packing, Line Alternative
Top & Bottom, Side by Side(Half)
Side by Side(Half), Top & Bottom,
Checker Board, MPO(Photo), JPS(Photo)
Signal
Playable 3D video format
Frame Compatible
Side by Side(Half), Top & Bottom
ENGLISH
Video, which is input as below media contents is switched into the 3D screen automatically.
yy
48
SPECIFICATIONS
3D supported mode manually
ENGLISH
Signal
Input
Resolution
Horizontal
Frequency
(kHz)
Verticla
Frequency
(Hz)
Playable 3D video format
DTV
HD / SD
-
-
ATV(CVBS/SCART)
SD
-
-
Component
HD / SD
-
-
1024X768
48.36
2D to 3D, Side by Side(Half),
Top & Bottom
1360X768
47.71
60
2D to 3D, Side by Side(Half),
Top & Bottom,
Checker Board, Frame
Sequential, Row Interleaving,
Column Interleaving
HDMI-PC
1920X1080
67.5
Others
-
-
2D to 3D, Side by Side(Half),
Top & Bottom
480P
31.5
60
576P
31.25
50
37.5
50
2D to 3D, Side by Side(Half),
Top & Bottom, Checker Board,
Frame Sequential, Row
Interleaving, Column
Interleaving
720p
45
60
28.12
50
33.75
60
27
24
28.12
25
33.75
30
56.25
50
67.5
60
Under
704x480
-
-
2D to 3D
Over 704x480
interlaced
-
-
2D to 3D, Side by Side(Half),
Top & Bottom
1080i
HDMI-DTV
1080p
USB ,DLNA
(Movie)
USB, DLNA
(Photo)
Miracast/Widi
2D to 3D, Side by Sied(Half),
Top & Bottom
2D to 3D, Side by Side(Half),
Top & Bottom,Checker Board,
Row Interleaving, Column
Interleaving
2D to 3D, Side by Side(Half),
Top & Bottom, Checker Board,
Frame Sequential, Row
Interleaving, Column
Interleaving
Over 704x480
progressive
-
50 / 60
2D to 3D, Side by Side(Half),
Top & Bottom,Checker Board,
Row Interleaving, Column
Interleaving, Frame Sequential
Over 704x480
progressive
-
others
2D to 3D, Side by Side(Half),
Top & Bottom,Checker Board,
Row Interleaving, Column
Interleaving
Under
320x240
-
-
2D to 3D
Over 320x240
-
-
2D to 3D, Side by Side(Half),
Top & Bottom
1024X768p
-
30 / 60
1280x720p
-
30 / 60
1920X1080p
-
30 / 60
Others
-
-
2D to 3D, Side by Side(Half),
Top & Bottom
2D to 3D
Make sure to read the Safety Precautions
before using the product.
Keep the Owner’s Manual (CD) in an
accessible place for future reference.
The model and serial number of the TV is
located on the back and one side of the
TV. Record it below should you ever need
service.
MODEL
SERIAL
To obtain the source code under GPL, LGPL,
MPL and other open source licenses, that is
contained in this product, please visit http://
opensource.lge.com.
In addition to the source code, all referred
license terms, warranty disclaimers and
copyright notices are available for download.
LG Electronics will also provide open source
code to you on CD-ROM for a charge covering
the cost of performing such distribution (such
as the cost of media, shipping and handling)
upon email request to [email protected].
This offer is valid for three (3) years from the
date on which you purchased the product.