PSM®200 PERSONAL MONITORING SYSTEM

PSM®200 PERSONAL MONITORING SYSTEM
PSM ® 200 Personal Monitoring System
PSM 200
PERSONAL MONITORING SYSTEM
®
The entry to professional in ear personal monitoring from Shure
The PSM200 is a frequency-agile, in-ear monitor system for use in a wide
variety of applications. Its many features help overcome the difficulties
associated with stage monitoring.
APPLICATIONS
Musicians
Bands
System Specifications:
RF Output Power: 10 – 30 mW (country specific)
PRODUCT HIGHLIGHTS
Operating Distance: Up to 100 m
Easy to use
Harmonic distortion: 1.5 % typical
MixMode®
Signal-to-noise-ratio: 80 dB (A) typical
Built-in audio limiter
Listening mode: Mono
Compatible Systems per band (up to): 4
Transmitter Inputs: 2x XLR/6,3 mm combo, mic/line level
Transmitter Outputs: 2x XLR split outputs
Wired Bodypack Option: Yes
Personal Mix Control: On transmitter
Remoteable Transmitter: No
Battery Life: Wired: 6 h; Wireless: 4 h
Frequency Response: 30 Hz – 12 kHz
Volume control on
bodypack receiver
PSM 200 Personal Monitoring System
®
P2T TransMixer
RF Output Power (Country dependent, typical conducted)
Modulation Limiter
30 mW (+15 dBm)
Internal peak limiter (>10:1 hard knee compression)
Antenna
1/4 wavelength, semi-rigid, PCB Mount
Current
170 mA maximum
Dimensions
220 × 140 × 40 mm
Net Weight
Audio Input:
370 g
Connector Type
XLR/1/4-inch combo
Configuration
Electronically balanced
Actual Impedance
1 kΩ
Nominal Input Level
-25 dBu @ 1/2 volume (12 o’clock)
Maximum Input Level
Pin Assignments:
Audio Outputs
(Passive connection,
parallel with input)
-5 dBu @ 1/2 volume (12 o’clock)
XLR
2=hot; 3=cold; 1=ground
1/4"
Tip=hot; Ring=cold; Sleeve=ground
Phantom Power Proctection?
Yes, up to 52 VDC
Connector Type
XLR
Configuration
Electronically balanced
Pin assignment
2=hot, 3=cold, 1=ground
Phantom Power Protection?
Yes, up to 52 VDC
P2T Front Panel
P2R Hybrid Bodypack Receiver
RF Sensitivity
-109 dBm, typical
Squelch Treshold
-102 dBm, typical
Antenna
Attached whip
Audio Input Connector
Connector Type
1/4-inch Mono
Impedance
Maximum Input Level
P2T Back Panel
1 MΩ
LO
+0 dBu
HI
-10 dBu
Frequency Response
30 Hz to 20 kHz (±3 dB)
Wired (RF OFF)
6 Hours
Wireless (RF ON)
4 Hours
(Earphone dependent)
Power Requirements
Battery Life
(Volume dependent)
9 V alkaline battery, Duracell® type MN1604 recommended
Audio Output Connector
1/8 inch (3.5 mm)
Minimum Load Impedence
8Ω
Net Weight
100 g, less battery
Overall Dimensions
122 × 73 × 32 mm
Furnished Accessories and Replacement Parts
Sound IsolatingTM Earphones
AC Adaptor
Single Mount Rack Bracket
Dual Mount Rack Bracket
Straddle Bars
Hardware Kit
SE112
PS21, PS21E, PS21AZ
53A8484
53E8484
59B8443
90AX8100
P2R Hybrid Bodypack Receiver
Frequency Range
Band
H2
R8
Q3
Range (MHz)
518 – 554
800 – 814
748 – 784
NOTE:
This Radio equipment is intended for use in musical professional
entertainment and similar applications. This Radio apparatus
may be capable of operating on some frequencies not authorized
in your region. Please contact your national authority to obtain
information on authorized frequencies and RF power levels for
wireless microphone products.
SE112 Sound IsolatingTM Earphones
www.shure.com/asia
© 2015 Shure Asia Limited
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement