Fanimation Zonix Wet FP4640 Spec Sheet
Fanimation Zonix Wet FP4640: Your versatile wet location fan for indoor and outdoor use. With its 52-inch blade sweep and powerful airflow of up to 5432 CFM, it's perfect for large rooms or covered patios. Choose from a variety of finishes to match your décor and enjoy the convenience of optional wall or remote controls (sold separately).
Advertisement
Advertisement
ZONIX
™
FP4640**
52˝ Wet
Location Fan
5.75˝ dia
Ceiling
B
A
7.29˝ dia
14° Blade Pitch 7.10˝ dia
Blade Sweep
25˝ Blade = 52˝ dia
20˝ Blade = 42˝ dia
Net Hanging Weight: 14.7 lbs
Floor
INSTALLATION REQUIREMENTS:
Fan must be attached to a securely anchored electrical junction box capable of withstanding a load of at least 50 lbs.
ELECTRICAL REQUIREMENTS:
Requires a grounded electrical supply line of
120 volts AC, 60 Hz, 15 amp circuit.
MOTOR SPECS:
153 x 18 motor is designed for optimal performance with this fan.
A B
Fan w/ 4.5˝downrod 15.57˝ 13.09˝
Fan w/12˝ downrod 21.57˝ 20.59˝
Fan w/18˝ downrod 27.57˝ 26.59˝
Fan w/24˝ downrod 33.57˝ 32.59˝
Fan w/36˝ downrod 45.57˝ 44.59˝
Fan w/48˝ downrod 57.57˝ 56.59˝
Fan w/60˝ downrod 69.57˝ 68.59˝
Fan w/72˝ downrod 81.57˝ 80.59˝
Available Finishes
Fan / Housing Assembly Blades
OB Oil-rubbed Bronze Cherry
SN Satin Nickel
WH White
Satin Nickel
White
Airflow / Energy Efficiency Info (120V)
Fan Speed Max RPM CFM CFM / Watts Amps Watts
High 173 5432 96 0.47
57
Med
Low
105 3409 154 0.30
60 1930 222 0.18
22
9
BLADES:
A set of three 25˝ all-weather composite blade set included. Optional sets of three 20˝ composite blades are available in cherry (BPW4442CY) and walnut (BPW4442WA) finishes-sold separately.
CONTROL OPTIONS:
Optional CW1, CW1SW, CW2, CW5 and CWRL4 wall controls and CRL4WH and CRL8TS remote controls (with receiver units) are available—sold separately. Instructions are provided with each control.
LIGHTING OPTIONS:
Optional lighting is not currently available for this fan.
DOWNROD OPTIONS:
Fan comes with a 1˝ dia. x 4.5˝ long downrod (DR1-45). Optional downrods available in 12˝, 18˝, 24˝, 36˝, 48˝, 60˝ and 72˝ lengths. Fan can be mounted on a sloped ceiling up to 30°. Most sloped ceiling installations require a downrod longer than the standard 6˝ downrod. Optional sloped ceiling ball kits (SCB1-52) are available for slope angles greater than 30° and up to 52°. Optional close-to-ceiling kit is available as well—sold separately. Call technical support for more information.
LOCATION USE:
Fan is rated for dry, damp and wet locations.
93
Advertisement