Eizo | DuraVisionFDX1501 | User`s manual | Eizo DuraVisionFDX1501

Eizo DuraVisionFDX1501
Important
Please read this User’s Manual and Setup Manual (separate volume)
carefully to familiarize yourself with safe and effective usage.
•Please refer to the Setup Manual for basic information ranging from
installation of the monitor to using the monitor.
•The latest User’s Manual is available for download from our web site:
http://www.eizo.com
Copyright© 2011 EIZO NANAO CORPORATION All rights reserved.
No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means,
electronic, mechanical, or otherwise, without the prior written permission of EIZO NANAO CORPORATION.
EIZO NANAO CORPORATION is under no obligation to hold any submitted material or information confidential
unless prior arrangements are made pursuant to EIZO NANAO CORPORATION’s receipt of said information.
Although every effort has been made to ensure that this manual provides up-to-date information, please note that
EIZO monitor specifications are subject to change without notice.
2

Notice for this monitor
This product may not be covered by warranty for uses other than those described in the Setup Manual.
The specifications noted in this manual are only applicable for signal cables specified by us.
Use optional products manufactured or specified by us with this product.
As it takes about 30 minutes for the performance of electrical parts to stabilize, adjust the monitor 30 minutes or more
after the monitor power has been turned on.
In order to suppress the luminosity change by long-term use and to maintain the stable luminosity, use of a monitor in
lower brightness is recommended.
When the screen image is changed after displaying the same image for extended periods of time, an afterimage may
appear. Use the screen saver or power save function to avoid displaying the same image for extended periods of time.
Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime (refer to
“Cleaning” (page 4)).
The LCD panel is manufactured using high-precision technology. However, missing pixels or lit pixels may appear on
the LCD panel, this is not malfunction. Percentage of effective dots: 99.9994% or higher.
The backlight of the LCD panel has a fixed life span. When the screen becomes dark or begins to flicker, please contact
your dealer.
Do not scratch or press on the panel with any sharp objects, as this may result in damage to the panel. Do not attempt
to brush with tissues as this may scratch the panel.
When the monitor is cold and brought into a room or the room temperature goes up quickly, dew condensation
may occur inside and outside the monitor. In that case, do not turn the monitor on and wait until dew condensation
disappears, otherwise it may cause some damages to the monitor.
(Cautions for the Use of the Touch Panel)
• During touch operation
Be careful of the following points. Otherwise, damage may occur to the monitor.
-- Do not strongly press, scratch, or poke the panel.
-- Do not touch the panel with hard objects such as ballpoint pens or metals.

3
Cleaning
Attention
• Never use any solvents or chemicals, such as thinner, benzene, wax, alcohol, and abrasive cleaner, which may
damage the cabinet or panel.
• Do not soak liquid into the clearance between the panel and the panel frame.
Note
• Optional ScreenCleaner is recommended for cleaning the panel surface.
●●Panel
• Clean the panel with a soft cloth such as cotton cloth or lens cleaning paper.
• If necessary, stubborn stains can be removed by moistening part of a cloth with water to enhance its
cleaning power. After that, clean the panel again with a dry cloth for better finishing.
To use the monitor comfortably
• An excessively dark or bright screen may affect your eyes. Adjust the brightness of the monitor according
to the environmental conditions.
• Staring at the monitor for a long time tires your eyes. Take a 10-minute rest every hour.
4

CONTENTS
Cover....................................................................... 1
Chapter 4 Power Saving Functions................. 20
Notice for this monitor............................................. 3
4-1.
Power Saving Mode..................................... 20
CONTENTS.............................................................. 5
4-2.
Setting Power Indicator
<Power Indicator>........................................ 20
4-3.
Enabling/Disabling Auto Power-OFF
<Off Timer>....................................................21
Chapter 1 Introduction........................................ 6
1-1.
1-2.
Features.......................................................... 6
EIZO LCD Utility Disk.................................... 6
●●
●●
Disk contents and software overview.............. 6
To use touch panel driver . .............................. 6
1-3.
Basic Operations and Functions................. 7
●●Basic Adjustment menu operations................. 7
●●Functions.......................................................... 8
Chapter 2 Adjusting Screens............................. 9
2-1.
Setting the Resolution.................................. 9
●●Display resolution............................................. 9
●●Setting resolution............................................. 9
Windows 7.................................................... 9
Windows Vista.............................................. 9
Windows XP................................................. 9
Mac OS X...................................................... 9
2-2.
5-1.
No picture..................................................... 22
5-2.
Imaging problems (for both digital and
analog)........................................................... 23
5-3.
Imaging problems (for analog only).......... 24
5-4.
Other problems............................................ 24
5-5.
Touch panel problems (for FDX1501T
only)............................................................... 25
Chapter 6 Reference......................................... 26
6-1.
Connecting Multiple PCs............................ 26
6-2.
Displaying Monitor Information
<Information>............................................... 27
6-3.
Specifications.............................................. 28
6-4.
Glossary........................................................ 32
6-5.
Preset Timing............................................... 34
●●To switch among input signals....................... 26
●●To set input signal selection <Input Signal>... 27
Displaying Screen Correctly.......................10
●●Digital Signal Input..........................................10
●●Analog Signal Input.........................................10
2-3.
Chapter 5 Troubleshooting............................... 22
Adjusting Color.............................................14
●●
●●
●●
●●
●●
●●
●●
To select the display mode (Color Mode)........14
To perform advanced adjustments.................14
Adjustable settings in each mode...................14
To adjust brightness <Brightness>.................15
To adjust contrast <Contrast>.........................15
To adjust color temperature <Temperature>...16
To adjust gain <Gain>.....................................16
Appendix............................................................... 35
Trademark................................................................ 35
LIMITED WARRANTY.............................................. 36
China Measures for RoHS Compliance in
ChinaRoHS......................................................... 45
Chapter 3 Setting Monitor................................ 17
3-1.
Changing Adjustment Menu Display
Position <Menu Position>............................17
3-2.
Locking Buttons............................................17
●●To lock adjustments/settings in the
Adjustment menu............................................17
To lock all operations......................................17
●●
3-3.
Setting the EIZO Logo Display....................18
3-4.
Setting Language <Language>...................18
3-5.
Enabling/Disabling DDC/CI
communication.............................................18
3-6.
Resetting the Monitor to the Default
Settings <Reset>...........................................19
●●To reset the color adjustments........................19
●●To reset all adjustments to the default
settings............................................................19
CONTENTS
5
Chapter 1 Introduction
Thank you very much for choosing an EIZO color LCD monitor.
1-1. Features
• 15” LCD
• Applicable to the resolution of 1024 × 768.
• LED backlight LCD panel
The LED backlight provides better power efficiency and reduced power consumption compared to existing fluorescent
backlight LCD panels. No mercury, a hazardous substance, is used.
• High-intensity pane
Maintains visibility under high-illumination conditions
• Supports a wide range of operating temperatures and operating humidity
- Operating temperature : 0°C to 50°C (32°F to 122°F)
- Operating humidity: 20% to 90% R.H. (wet bulb temperature ≤ 39 °C (102 °F), no condensation)
• A 2-year long-term warranty for 24-hour continuous use
• Resistive technology touch panel function (for FDX1501T only)
Compatible with Microsoft Windows 7 / Vista / XP
1-2. EIZO LCD Utility Disk
An “EIZO LCD Utility Disk” (CD-ROM) is supplied with this product. The following table shows the disk
contents and the overview of the software programs.
●●Disk contents and software overview
The disk includes adjustment software, touch panel software, and user’s manuals. Refer to Readme.txt file on
the disk for software startup procedures or file access procedures.
Item
Overview
A “Readme.txt” file
Windows
Macintosh
√
√
Screen adjustment pattern files
Used when adjusting the image of
analog signal input manually.
√
√
Touch Panel Driver*
Driver for touch panel
√
-
√
√
√
-
User’s Manual of this monitor (PDF file)
*
User’s Manual for Touch Panel Driver (PDF file)
*
Used only for the FDX1501T.
●●To use touch panel driver
For information on how to install or use the touch panel driver, see the Touch Panel Driver User’s Manual (on
the CD-ROM).
6
Chapter 1 Introduction
1-3. Basic Operations and Functions
●●Basic Adjustment menu operations
1.Displaying Adjustment Menu
1. Press
. The adjustment menu appears.
At digital signal input
2.Adjusting/Setting
1. Choose a menu to adjust/set with
or
, and then press
. The Sub menu appears.
2. Choose an item to adjust/set with
or
, and then press
. The adjustment/ setting menu appears.
3. Adjust/set the selected item with
or
, and then press
3.Exiting
.
1. Choose <Return> from the Sub menu and press
. The Main menu appears.
2. Choose <Exit> from the Main menu and press
. The Adjustment menu exits.
Note
• The Adjustment menu can also be exited by pressing
twice quickly.
Chapter 1 Introduction
7
●●Functions
The following table shows all the Adjustment menu’s adjustment and setting menus.
Main menu
Auto Adjustment*1
Setting
Screen
Range
Screen
Reference
“2-2. Displaying Screen Correctly”
(page 10)
Clock*1
Phase*1
Hor.Position*1
Ver.Position*1
Smoothing
Return
Color
*2
Brightness
“2-3. Adjusting Color” (page 14)
Color Mode
Contrast
Temperature
Gain
Reset
Others
Input Signal
Off Timer
Menu Position
Power Indicator
Reset
Information
Language
*1
*2
8
“To reset the color adjustments”
(page 19)
“To set input signal selection <Input
Signal>” (page 27)
“4-3. Enabling/Disabling Auto
Power-OFF <Off Timer>” (page 21)
“3-1. Changing Adjustment Menu
Display Position <Menu Position>”
(page 17)
“4-2. Setting Power Indicator
<Power Indicator>” (page 20)
“To reset all adjustments to the
default settings” (page 19)
“6-2. Displaying Monitor Information
<Information>” (page 27)
“3-4. Setting Language
<Language>” (page 18)
Analog signal input only
The adjustment/settings available on the <Color> menu depend on the selected Color Mode.
Chapter 1 Introduction
Chapter 2 Adjusting Screens
2-1. Setting the Resolution
●●Display resolution
For details on compatible resolutions, refer to “Compatible Resolutions” in the Setup Manual.
●●Setting resolution
When you connect the monitor to the PC and find that the resolution is improper, or when you want to
change the resolution, follow the procedure below.
Windows 7
1. Right-click the mouse anywhere on the desktop except for icons.
2. From the displayed menu, click “Screen resolution”.
3. On the “Screen Resolution” dialog box, select the monitor.
4. Click “Resolution” to select the desired resolution.
5. Click the “OK” button.
6. When a confirmation dialog box is displayed, click [Keep changes].
Windows Vista
1. Right-click the mouse anywhere on the desktop except for icons.
2. From the displayed menu, click “Personalize”.
3. On the “Personalization” window, click “Display Settings”.
4. On the “Display Settings” dialog box, select the “Monitor” tab and select desired resolution in the
“Resolution” field.
5. Click the “OK” button.
6. When a confirmation dialog box is displayed, click “Yes”.
Windows XP
1. Right-click the mouse anywhere on the desktop except for icons.
2. From the displayed menu, click “Properties”.
3. When the “Display Properties” dialog box is displayed, click the “Settings” tab and select desired
resolution for “Screen resolution” under “Display”.
4. Click the “OK” button to close the dialog box.
Mac OS X
1. Select “System Preferences” from the Apple menu.
2. When the “System Preferences” dialog box is displayed, click “Displays” for “Hardware”.
3. On the displayed dialog box, select the “Display” tab and select desired resolution in the “Resolutions”
field.
4. Your selection will be reflected immediately. When you are satisfied with the selected resolution, close
the window.
Chapter 2 Adjusting Screens
9
2-2. Displaying Screen Correctly
●●Digital Signal Input
When digital signals are input, images are displayed correctly based on the preset data of the monitor, but if
characters and/or lines appear blurred, go to “6. Modify blurred characters or lines.” (page 13).
When performing more advanced adjustment, see “2-3. Adjusting Color” (page 14) and subsequent pages.
●●Analog Signal Input
Attention
• The monitor will take about 30 minutes before its internal electric components stabilize. Wait 30 minutes or more
after turning the monitor power on before starting adjustment.
• The self adjustment function does not work for the images under the vertical resolution of 480 or less.
• The self adjustment and auto adjustment functions work correctly when an image is fully displayed over the
Windows or Macintosh display area. They do not work properly in the cases below:
- When an image is displayed only on a part of the screen (command prompt window, for example)
- When a black background (wallpaper, etc.) is in use
Also, these functions cannot work properly in some graphic boards.
The monitor screen adjustment is used to suppress flickering of the screen or adjust screen position and
screen size correctly according to the PC to be used.
Note
• The self adjustment function works when all of the following conditions are satisfied:
- When a signal is input into the monitor for the first time or when a resolution or vertical/horizontal scan frequency
not used before is set
If the screen is not displayed correctly even after performing the self adjustment operation, adjust the screen
according to the procedures on the following pages to use the monitor comfortably.
Setting Procedures
1.Perform the auto adjustment.
●●To adjust flickering, screen position, and screen size automatically
<Screen>
Procedure
.
1. Choose <Auto Adjustment> from the Adjustment menu, and press
2. Choose <Screen> from the <Auto Adjustment> menu, and press
.
The <Auto Adjustment> menu appears.
3. Select <Execute> with
or
, and press
.
Flickering, screen position, and screen size are corrected by the auto-adjustment function.
If the screen is not displayed correctly even after performing “1. Perform the auto adjustment.” (page 10),
perform the adjustments according to the procedures on the following pages. If the screen is displayed
correctly, go to “5. Adjusting color gradation.” (page 13).
10
Chapter 2 Adjusting Screens
2.Prepare to use analog screen adjustment patterns.
Load the “EIZO LCD Utility Disk” to your PC, and then open the “Screen adjustment pattern files”.
Note
• For details and instructions on opening the “Screen adjustment pattern files”, refer to the Readme.txt file.
3.Perform the auto adjustment again with the analog screen adjustment pattern
displayed.
●●To adjust flickering, screen position, and screen size automatically
<Screen>
Procedure
1. Display Pattern 1 in full screen on the monitor using the “Screen adjustment pattern files”.
2. Choose <Auto Adjustment> from the Adjustment menu, and press
3. Choose <Screen> from the <Auto Adjustment> menu, and press
.
.
The <Auto Adjustment> menu appears.
4. Select <Execute> with
or
, and press
.
Flickering, screen position, and screen size are corrected by the auto-adjustment function.
If the screen is not displayed correctly even after performing “3. Perform the auto adjustment again
with the analog screen adjustment pattern displayed.” (page 11), perform the adjustments according to
the procedures on the following pages. If the screen is displayed correctly, go to “5. Adjusting color
gradation.” (page 13).
4.Choose
<Screen> from the Adjustment menu to perform advanced
adjustments.
Adjust the clock, phase and position, in this order.
●●To eliminate vertical bars <Clock>
Procedure
1. Choose <Clock> from the <Screen> menu, and press
.
The <Clock> menu appears.
2. Adjust the clock with
Press
3. Press
or
or
to eliminate vertical bars.
slowly so as not to miss the adjustment point.
to exit the adjustment.
When blurring, flickering or bars appear on the screen after adjustment, proceed to “Phase” to remove flickering or
blurring.
Chapter 2 Adjusting Screens
11
●●To remove flickering or blurring <Phase>
Procedure
1. Choose <Phase> from the <Screen> menu, and press
.
The <Phase> menu appears.
2. Adjust the phase with
3. Press
or
to minimize flickering or blurring.
to exit the adjustment.
When vertical bars appear on the screen after adjustment, go back to “To eliminate vertical bars <Clock>”.
(Clock → Phase → Position)
Attention
• Flickering or blurring may not be eliminated depending on your PC or graphics board.
●●To correct the screen position <Hor.Position> <Ver.Position>
Note
• Since the number of pixels and the pixel positions are fixed on the LCD monitor, only one position is provided to
display images correctly. The position adjustment is made to shift an image to the correct position.
Procedure
1. Choose <Hor.Position> or <Ver.Position> from the <Screen> menu, and press
The <Hor.Position> or <Ver.Position> menu appears.
2. Adjust the position with
3. Press
to exit the adjustment.
4. Close Pattern 1.
12
or
Chapter 2 Adjusting Screens
.
.
5.Adjusting color gradation.
●●To adjust color gradation automatically <Range>
Every color gradation (0 to 255) can be displayed by adjusting the signal output level.
Procedure
1. Display Pattern 2 in full screen on the monitor using the “Screen adjustment pattern files”.
2. Choose <Auto Adjustment> from the Adjustment menu, and press
3. Choose <Range> from the <Auto Adjustment> menu, and press
.
.
The <Range> menu appears.
4. Select <Execute> with
or
, and press
.
The output range is set automatically.
5. Close Pattern 2.
6.Modify blurred characters or lines.
●●To modify blurred characters/lines <Smoothing>
When an image is displayed with a resolution other than recommended, the characters or lines of the
displayed image may blur.
Attention
• Smoothing setting may not be required depending on the display resolution. (You cannot choose the smoothing icon.)
Adjustable range
1 to 5
Procedure
1. Choose <Screen> from the Adjustment menu, and press
2. Choose <Smoothing> from the <Screen> menu, and press
.
.
The <Smoothing> menu appears.
3. Use
4. Press
or
for adjustment.
to exit the adjustment.
Chapter 2 Adjusting Screens
13
2-3. Adjusting Color
●●To select the display mode (Color Mode)
This function allows easy selection of a desired mode according to monitor application.
Display Modes
Mode
Purpose
Custom
Select one of these user modes to define a desired set of parameter settings.
EyeCare
Allows the brightness to be set lower than possible with other modes.
sRGB
Suitable for color matching with sRGB compatible peripherals.
Text
Suitable for displaying texts for word processing or spreadsheets.
Procedure
1. Choose <Color> from the Adjustment menu, and press
.
2. Choose <Color Mode> from the <Color> menu, and press
3. Use
4. Press
or
.
for adjustment.
to exit the adjustment.
●●To perform advanced adjustments
The <Color> menu of the Adjustment menu allows you to configure and save a separate set of color settings
for each mode.
Attention
• The monitor will take about 30 minutes before its internal electric components stabilize. Wait 30 minutes or more
after turning the monitor power on before starting adjustment.
• Perform the range adjustment first when adjusting color for analog signals (see “To adjust color gradation
automatically <Range>” (page 13)).
• The same image may be seen in different colors on multiple monitors due to their monitor-specific characteristics.
Make fine color adjustment visually when matching colors on multiple monitors.
Note
• The values shown in “%” or “K” are available only as reference.
●●Adjustable settings in each mode
The adjustable settings depend on the mode. (You cannot select any non-adjustable or non-settable function.)
√: Adjustable -: Not adjustable
Icon
14
Function
Color Mode
Custom
EyeCare
sRGB
Text
Brightness
√
√
√
√
Contrast
√
-
-
√
Temperature
√
√
-
√
Gain
√
√
-
-
Reset
√
√
√
√
Chapter 2 Adjusting Screens
●●To adjust brightness <Brightness>
The screen brightness is adjusted by changing the brightness of the backlight (light source from the LCD
back panel).
Adjustable range
0 to 100%
Procedure
or
1. Press
.
The Brightness menu appears.
2. Use
3. Press
or
for adjustment.
to exit the adjustment.
Note
• If you feel that the image is too bright even if the brightness is set to 0% or that the image is too dark even if the
brightness is set to 100%, adjust the contrast.
• Alternatively, you can use <Brightness> under <Color> in the Adjustment menu to adjust it.
●●To adjust contrast <Contrast>
The brightness of the screen is adjusted by varying the video signal level.
Adjustable range
0 to 100%
Procedure
1. Choose <Color> from the Adjustment menu, and press
.
2. Choose <Contrast> from the <Color> menu, and press
.
The <Contrast> menu appears.
3. Use
4. Press
or
for adjustment.
to exit the adjustment.
Note
• In the contrast of 50%, every color gradation is displayed.
• When adjusting the monitor, it is recommended to perform the brightness adjustment which may not lose the
gradation characteristics, prior to the contrast adjustment.
• Perform the contrast adjustment in the following cases.
- When you feel the image is too dark even if the brightness is set to 100% (Set the contrast to higher than 50%.)
- When you feel the image is too bright even if the brightness is set to 0% (Set the contrast to lower than 50%.)
Chapter 2 Adjusting Screens
15
●●To adjust color temperature <Temperature>
Color temperature can be adjusted.
The color temperature is normally used to express the hue of “White” and/or “Black” by a numerical value.
The value is expressed in degrees “K” (Kelvin).
The screen becomes reddish at a low color temperature, and bluish at a high color temperature, like the flame
temperature. A gain preset value is set for each color temperature setting value.
Adjustable range
Off, 5000K, 6500K, 9300K
Procedure
1. Choose <Color> from the Adjustment menu, and press
.
2. Choose <Temperature> from the <Color> menu, and press
.
The <Temperature> menu appears.
3. Use
4. Press
or
for adjustment.
to exit the adjustment.
Note
• <Gain> allows you to perform more advanced adjustment (see “To adjust gain <Gain>” (page 16)).
• If you set to “Off”, the image is displayed in the preset color of the monitor (Gain: 100% for each RGB).
• When gain is changed, the color temperature is changed to “Off”.
●●To adjust gain <Gain>
The brightness of each color component red, green, and blue is called “Gain”. You can change the hue of
“white” by adjusting gain.
Adjustable range
0 to 100%
Procedure
1. Choose <Color> from the Adjustment menu, and press
2. Choose <Gain> from the <Color> menu, and press
.
.
The <Gain> menu appears.
3. Adjust gain with
4. Press
or
for each of red, green, and blue.
to exit the adjustment.
Attention
• Using this function may make some color gradations unavailable for display.
Note
• The value of gain changes with that of color temperature.
• When gain is changed, the color temperature is changed to “Off”.
16
Chapter 2 Adjusting Screens
Chapter 3 Setting Monitor
3-1. Changing Adjustment Menu Display Position
<Menu Position>
You can change the display position of the Adjustment menu.
Procedure
1. Choose <Others> from the Adjustment menu, and press
.
2. Choose <Menu Position> from the <Others> menu, and press
.
The <Menu Position> menu appears.
3. Adjust the position with
4. Press
or
.
to exit the adjustment.
3-2. Locking Buttons
This function allows you to lock to prevent changing the adjusted/set status.
●●To lock adjustments/settings in the Adjustment menu
Procedure
1. Press
to turn off the monitor.
2. Press
holding
down to turn on the monitor.
You can toggle between Lock and Unlock by performing steps 1 and 2.
●●To lock all operations
Procedure
1. Holding
down, press
for five seconds while the screen is displayed.
You can toggle between Lock and Unlock by performing this step.
Chapter 3 Setting Monitor
17
3-3. Setting the EIZO Logo Display
You can choose to display or not to display the EIZO logo, which appears when you turn on the monitor.
Procedure
1. Press
to turn off the monitor.
2. Press
holding
down to turn on the monitor.
The EIZO logo display setting is toggled by performing the operation in steps 1 and 2.
3-4. Setting Language <Language>
This function allows you to select a language for the Adjustment menu and messages.
Selectable languages
English / German / French / Spanish / Italian / Swedish / Simplified Chinese/ Traditional Chinese/ Japanese
Procedure
1. Choose <Language> from the Adjustment menu, and press
.
The <Language> menu appears.
2. Choose a language with
3. Press
or
.
to exit the adjustment.
3-5. Enabling/Disabling DDC/CI communication
This function allows you to enable/disable the DDC/CI communication (see “6-4. Glossary” (page 32)).
Procedure
1. Press
to turn off the monitor.
2. Press
holding
down to turn on the monitor.
You can toggle between Enable and Disable by performing steps 1 and 2.
Note
• You can check the DDC/CI setting in the <Information> menu.
18
Chapter 3 Setting Monitor
3-6. Resetting the Monitor to the Default Settings
<Reset>
There are two different Resets: Color Reset for only resetting the color adjustments to the default settings and
Full Reset for resetting all settings to the defaults.
Attention
• After resetting, you cannot undo the operation.
Note
• Regarding the default setting, see “Main Default Settings” (page 30).
●●To reset the color adjustments
This function only resets the color adjustments for the currently selected mode to the default settings.
Procedure
.
1. Choose <Color> from the Adjustment menu, and press
2. Choose <Reset> from the <Color> menu, and press
3. Select “Reset” with
4. Press
or
.
.
.
The color adjustments revert to the default settings.
●●To reset all adjustments to the default settings
This function resets all adjustments to the default settings.
Procedure
1. Choose <Others> from the Adjustment menu, and press
2. Choose <Reset> from the <Others> menu, and press
3. Select “Reset” with
4. Press
or
.
.
.
.
All adjustments revert to the default settings.
Chapter 3 Setting Monitor
19
Chapter 4 Power Saving Functions
4-1. Power Saving Mode
When the monitor has shifted to the power saving mode, the images on the screen are not displayed.
Attention
• Unplugging the power cord completely shuts off power supply to the monitor.
Power Saving System
Analog Signal Input
This monitor complies with the VESA DPM standard.
PC
On
Power saving
mode
STAND-BY
SUSPENDED
OFF
Power
Indicator
Monitor
Operating
Blue
Power saving mode
Orange
Digital Signal Input
This monitor complies with the DVI DMPM standard.
The monitor enters the power saving mode in five seconds in connection with the PC setting.
PC
Power
Indicator
Monitor
On
Operating
Blue
Power saving mode
Power saving mode
Orange
Exiting the power saving mode
If the monitor receives input, it automatically exits the power saving mode and returns to the normal display
mode.
4-2. Setting Power Indicator <Power Indicator>
This function allows you to set the power indicator (blue) ON/OFF in the monitor ON condition.
Procedure
1. Choose <Others> from the Adjustment menu, and press
.
2. Choose <Power Indicator> from the <Others> menu, and press
The <Power Indicator> menu appears.
3. Select “Enable” or “Disable” with
4. Press
20
to exit the adjustment.
Chapter 4 Power Saving Functions
or
.
.
4-3. Enabling/Disabling Auto Power-OFF <Off Timer>
This function allows you to specify whether to turn on/off the monitor automatically after a specified time has
elapsed in the power saving mode.
Adjustable range
Disable, Enable (0, 1, 2, 3, 5, 10, 15, 20, 25, 30, 45 min, 1-5 h)
Procedure
1. Choose <Others> from the Adjustment menu, and press
2. Choose <Off Timer> from the <Others> menu, and press
.
.
The <Off Timer> menu appears.
3. Select “Enable” or “Disable” with
or
.
If “Enable” is selected, set a monitor Off time with
4. Press
or
.
to exit the adjustment.
Chapter 4 Power Saving Functions
21
Chapter 5 Troubleshooting
If a problem still remains after applying the suggested remedies, contact your local dealer.
5-1. No picture
Problem
1. No picture
• Power indicator does not light.
• Power indicator is lighting blue.
• Increase <Brightness>, <Contrast>, and/or <Gain>
in the Adjustment menu (see “To perform advanced
adjustments” (page 14)).
• Power indicator is lighting orange.
• Switch the input signal with .
• Operate the mouse or keyboard.
• Check whether the PC is turned on.
2. The message below appears.
This message appears when the signal is not input
correctly even when the monitor functions properly.
• This message appears when no signal is
input.
Example:
• The message shown left may appear, because some
PCs do not output the signal soon after power-on.
• Check whether the PC is turned on.
• Check whether the signal cable is connected properly.
• Switch the input signal with .
• The message shows that the input signal is out
of the specified frequency range. (Such signal
frequency is displayed in red.)
Example:
• Check whether the PC is configured to meet the
resolution and vertical scan frequency requirements
of the monitor (see “Compatible Resolutions” in the
Setup Manual).
• Reboot the PC.
• Select an appropriate display mode using the graphics
board’s utility. Refer to the manual of the graphics
board for details.
fD: Dot Clock
(Displayed only during digital signal input)
fH: Horizontal Scan Frequency
fV: Vertical Scan Frequency
22
Possible cause and remedy
• Check whether the power cord is connected properly.
• Press .
Chapter 5 Troubleshooting
5-2. Imaging problems (for both digital and analog)
Problem
Possible cause and remedy
1. The screen is too bright or too dark.
• Use <Brightness> or <Contrast> in the Adjustment
menu to adjust it. (The LCD monitor backlight has a
limited life span. When the screen becomes dark or
begins to flicker, contact your local dealer.)
2. Characters are blurred.
• Check whether the PC is configured to meet the
resolution and vertical scan frequency requirements
of the monitor (see “Compatible Resolutions” in the
Setup Manual).
• Use <Smoothing> in the Adjustment menu to adjust it
(see “To modify blurred characters/lines <Smoothing>”
(page 13)).
3. Afterimages appear.
• Afterimages are particular to LCD monitors. Avoid
displaying the same image for a long time.
• Use the screen saver or power save function to avoid
displaying the same image for extended periods of
time.
4. Green/red/blue/white dots or defective
dots remain on the screen.
• This is due to LCD panel characteristics and is not a
failure.
5. Interference patterns or pressure marks
remain on the screen.
• Leave the monitor with a white or black screen. The
symptom may disappear.
6. Noise appears on the screen.
• When entering the signals of HDCP system, the
normal images may not be displayed immediately.
7. The screen is whitish or blackish.
• Use <Contrast> in the Adjustment menu to adjust it
(see “To adjust contrast <Contrast>” (page 15)).
Chapter 5 Troubleshooting
23
5-3. Imaging problems (for analog only)
Problem
Possible cause and remedy
1. Display position is incorrect.
• Use <Position> in the Adjustment menu to correct the
image position (see “To correct the screen position
<Hor.Position> <Ver.Position>” (page 12)).
• If the problem persists, use the graphics board’s utility
if available to change the display position.
2. Vertical bars appear on the screen or a
part of the image is flickering.
• Use <Clock> in the Adjustment menu to adjust it (see
“To eliminate vertical bars <Clock>” (page 11)).
3. Whole screen is flickering or blurring.
• Use <Phase > in the Adjustment menu to adjust it (see
“To remove flickering or blurring <Phase>” (page 12)).
5-4. Other problems
Problem
24
Possible cause and remedy
1. The adjustment menu does not appear.
• Check whether the operation lock function works (see
“3-2. Locking Buttons” (page 17)).
2. All control buttons are disabled.
• Check whether the operation lock function works (see
“3-2. Locking Buttons” (page 17)).
3. The auto adjustment function does not
work.
• This function does not work during digital signal input.
• This function is intended for use on the Macintosh
and on AT-compatible PC running Windows. It does
not work properly when an image is displayed only
on a part of the screen (command prompt window, for
example) or when a black background (wallpaper, etc.)
is in use.
• This function does not work correctly with some
graphics boards.
Chapter 5 Troubleshooting
5-5. Touch panel problems (for FDX1501T only)
Attention
• For information on how to install or use the touch panel driver, see the Touch Panel Driver User’s Manual (on the CDROM).
Problem
Possible cause and remedy
1. Cursor position is not correct. / Cursor
jumps.
• Turn off and on the monitor. If the symptom is not
improved, perform the calibration on the monitor.
• Touch with one finger only.
• Connect the monitor to the PC with the cable
indicated in the Setup Manual or User’s Manual of the
monitor. Using a conversion adapter, the touch panel
may not operate properly.
2. Touch operation is not effective.
• Check whether “Use EEPROM” in the “Device” menu
is not checked in the “Properties” settings of the touch
panel driver. If the check is already applied, perform
the calibration.
• Other login user may have changed the setting. Set
the touch panel driver again.
• Restart “DMC Touch Panel Configuration”, or reboot
the PC.
3. Some deflection may appear on the
surface of touch panel portion.
• Due to the touch panel structural characteristics, the
deflection may occur on the touch panel surface in
high temperature/high humidity operating environment.
This is not a trouble.
4. Not touch-sound.
• The touch-sound may not be output from the external
line out of the PC depending on the hardware
configuration.
• Under Windows 7, touch-sound is only output through
the audio output terminal of the PC. To hear touchsound, connect speakers.
Chapter 5 Troubleshooting
25
Chapter 6 Reference
6-1. Connecting Multiple PCs
The product has multiple connections to PCs and allows you to switch to one of the connections for display.
Attention
• Do not use dual link cables.
• It is assumed the touch panel monitor will be used with one computer. When the monitor is to be connected to multiple
computers, connect a USB cable (MD-C93) to the computer used for touch operation (one unit only).
Connection examples
DVI-D connector
Digital
(DVI)
Analog
Signal cable
(option FD-C39)
●●To switch among input signals
D-Sub connector
Signal cable
(supplied MD-C87)
DVI
connector
D-Sub mini 15-pin
connector
To PC 1
To PC 2
The input signal switches each time is pressed.
When the signal is switched, the active input port name appears at the top right corner of the screen.
When the signal is switched, the active signal type (Analog or Digital) appears at the top right corner of the
screen for three seconds.
26
Chapter 6 Reference
●●To set input signal selection <Input Signal>
Setting
Function
Auto
The monitor recognizes the connector through which PC signals are input.
When a PC is turned off or enters the powersaving mode, the monitor automatically
displays another signal.
Manual
The monitor detects only the PC’s signals currently displaying automatically. Select an
active input signal with .
Note
• When “Auto” is selected for <Input Signal>, the monitor’s power-saving function works only when the two PCs are in
the power-saving mode.
Procedure
1. Choose <Others> from the Adjustment menu, and press
.
2. Choose <Input Signal> from the <Others> menu, and press
.
The <Input Signal> menu appears.
3. Select “Auto” or “Manual” with
4. Press
or
.
to exit the adjustment.
6-2. Displaying Monitor Information <Information>
This function allows you to display the input signal status, current resolution and model name.
Information 1/3: Input signal status, resolution, and horizontal/vertical scan frequencies
Information 2/3: DDC/CI Enable/Disable status
Information 3/3: Model name, serial number, and usage time
Procedure
1. Choose <Information> from the Adjustment menu, and press
.
The <Information> menu appears.
2. Then, press
to check settings, etc.
Attention
• The usage time is not always “0” when you purchase the monitor due to factory inspection.
Chapter 6 Reference
27
6-3. Specifications
FDX1501
LCD panel
Horizontal scan
frequency
Vertical scan
frequency
Size
15.0-inch (380 mm) TFT color LCD
Surface treatment
Anti-glare, hard coating
Surface hardness
3H
Viewing angles
Viewing angles: Horizontal 160°, vertical 140° (CR≥10)
Dot pitch
0.297 mm
Response time
Black-white-black: Approx. 8 ms
Analog
24.8-60.1 kHz
Digital
31-49 kHz
Analog
55.0-75.1 Hz (non-interlace)
Digital
59-61 Hz (non-interlace)
(VGA TEXT: 69-71 Hz)
Resolution
Max. dot clock
1024 dots × 768 lines
Analog
Digital
80 MHz
65 MHz
Max. display color
Approx. 16.2 million colors
Display area (H × V)
304.1 mm × 228.0 mm (12 inch × 9 inch)
Power supply
12 VDC ±10%, 1.0 A
Power consumption
Screen display On
12 W or less
Power saving mode
1 W or less
Power Off
1 W or less
Input signal connector
(for D-Sub single signal input)
D-Sub mini 15-pin
DVI-D connector (Applicable to HDCP)
Analog input signal (Sync)
Separate, TTL, positive/negative
Analog input signal (Video)
Analog, positive (0.7Vp-p/75Ω)
Digital signal transmission
TMDS (single link)
Plug & play
VESA DDC 2B/EDID structure 1.3
Dimensions (width)
× (height) × (depth)
Chassis mount type
357.4 mm (14.1 inch) × 273.4 mm (10.8 inch) × 63 mm (2.48 inch)
Panel mount type
383 mm (15.1 inch) × 331 mm (13.0 inch) × 63 mm (2.48 inch)
Mass
Chassis mount type
Approx. 2.7 kg (6.0 lbs.)
Panel mount type
Approx. 3.8 kg (8.4 lbs.)
Temperature
Operating: 0°C to 50°C (32°F to 122°F)
Storage: -20°C to 60°C (-4°F to 140°F)
Humidity
Operating: 20% to 90% R.H. (wet bulb temperature ≤ 39 °C (102
°F), no condensation)
Storage: 10% to 90% R.H. (wet bulb temperature ≤ 39 °C (102
°F), no condensation)
Air pressure
Operating: 700 to 1,060 hPa
Storage: 200 to 1,060 hPa
Environmental
conditions
28
Chapter 6 Reference
FDX1501T
LCD panel
Size
15.0-inch (380 mm) TFT color LCD
Viewing angles
Viewing angles: Horizontal 160°, vertical 140° (CR≥10)
Dot pitch
0.297 mm
Response time
Black-white-black: Approx. 8 ms
Horizontal scan
frequency
Analog
24.8-60.1 kHz
Digital
31-49 kHz
Vertical scan
frequency
Analog
55.0-75.1 Hz (non-interlace)
Digital
59-61 Hz (non-interlace)
(VGA TEXT: 69-71 Hz)
Resolution
Max. dot clock
1024 dots × 768 lines
Analog
80 MHz
Digital
65 MHz
Max. display color
Approx. 16.2 million colors
Display area (H × V)
304.1 mm × 228.0 mm (12 inch × 9 inch)
Touch panel
Surface treatment
Anti-glare, hard coating
Surface hardness
2H
Communication
USB-based
Detection method
Analog resistive technology
OS
Microsoft Windows 7 Service Pack 1 (32 bit)
Microsoft Windows Vista Service Pack 2 (32 bit)
Microsoft Windows XP Service Pack 3 (32 bit)
(Not compatible with Mac OS)
Power supply
12 VDC ±10%, 1.0 A
Power consumption Screen display On
12 W or less
Power saving mode
1 W or less
Power Off
1 W or less
Input signal connector
(for D-Sub single signal input)
D-Sub mini 15-pin
DVI-D connector (Applicable to HDCP)
Analog input signal (Sync)
Separate, TTL, positive/negative
Analog input signal (Video)
Analog, positive (0.7Vp-p/75Ω)
Digital signal transmission
TMDS (single link)
Plug & play
VESA DDC 2B/EDID structure 1.3
Dimensions (width) Chassis mount type
× (height) × (depth) Panel mount type
357.4 mm (14.1 inch) × 273.4 mm (10.8 inch) × 63 mm (2.48 inch)
Mass
Environmental
conditions
383 mm (15.1 inch) × 331 mm (13.0 inch) × 63 mm (2.48 inch)
Chassis mount type
Approx. 3.4 kg (7.5 lbs.)
Panel mount type
Approx. 3.9 kg (8.6 lbs.)
Temperature
Operating: 0°C to 50°C (32°F to 122°F)
Storage: -20°C to 60°C (-4°F to 140°F)
Humidity
Operating: 20% to 90% R.H. (wet bulb temperature ≤ 39 °C (102
°F), no condensation)
Storage: 10% to 90% R.H. (wet bulb temperature ≤ 39 °C (102
°F), no condensation)
Air pressure
Operating: 700 to 1,060 hPa
Storage: 200 to 1,060 hPa
Chapter 6 Reference
29
Main Default Settings
Smoothing
3
Color Mode
Custom
Input Signal
Auto
Off Timer
Disable
Language
English
Outside Dimensions
Chassis mount type
• FDX1501
Unit: mm (inch)
7.2 (0.28)
20 (0.79)
100 (3.9)
127 (5.0)
63 (2.48)
174 (6.9)
73.7 (2.90)
228.1 (9.0)
273.4 (10.8)
Display area
M4 (Screw holes for
securing the clamper)
M4 (VESA
mounting holes)
18 (0.71)
348.2 ± 1 (13.7 ± 0.04)
100 (3.9)
24 (0.94)
357.4 (14.1)
304.1 (12.0)
Display area
18 (0.71)
9.7 (0.38)
129.5 (5.1)
64.7 (2.55)
144 ± 0.5 (5.7 ± 0.02)
343 (13.5)
303 (11.9)
33 (1.3)
63 (2.48) 1 (0.04)
7.2 (0.28)
20 (0.79)
104.1 (4.1)
100 (3.9)
4.5×6 (0.18×0.24)
(Enclosure mounting holes)
• FDX1501T
M4 (Screw holes for
securing the clamper)
Chapter 6 Reference
18 (0.71)
9.7 (0.38)
104.1 (4.1)
100 (3.9)
4.5×6 (0.18×0.24)
(Enclosure mounting holes)
30
M4 (VESA
mounting holes)
18 (0.71)
129.5 (5.1)
100 (3.9)
127 (5.0)
174 (6.9)
73.7 (2.90)
63 (2.48)
22.2
(0.87)
22.2
(0.87)
Display area 228.1 (9.0)
Dimension available for touch panel input
229 (9.0)
273.4 (10.8)
231.2 (9.1)
307.2 (12.1)
348.2 ± 1 (13.7 ± 0.04)
100 (3.9)
24 (0.94)
144 ± 0.5 (5.7 ± 0.02)
357.4 (14.1)
26.2 (1.03) Dimension available for touch panel input 26.2 (1.03)
305 (12.0)
Display area 304.1 (12.0)
64.7 (2.55)
7.2 (0.28)
20 (0.79)
31 (1.22)
343 (13.5)
303 (11.9)
63 (2.48) 1 (0.04)
Unit: mm (inch)
7.2 (0.28)
20 (0.79)
Outside Dimensions
Panel mount type
• FDX1501
MAX.22 (0.87)
21.9 (0.86)
M4 (Screw holes for
securing the clamper)
289 ± 0.5 (11.4 ± 0.02)
Panel opening dimensions
68.2 (2.69)
MAX.22
(0.87)
141.5 (5.6)
174 (6.9)
273.2 (10.8)
287.3 (11.3)
87.6 (3.45)
37.9 (1.49)
100 (3.9)
24 (0.94)
M4 (VESA mounting holes)
9.7 (0.38)
129.5 (5.1)
162.8 (6.4)
100 (3.9)
141.5 (5.6)
231.2 (9.1)
56.9 (2.24)
42.9 (1.69)
172.5 (6.8)
158.5 (6.2)
331 (13.0)
37.9 (1.49)
383 (15.1)
307.2 (12.1)
341 ± 0.5 (13.4 ± 0.02)
MAX.22 (0.87) Panel opening dimensions
MAX.22
(0.87)
32 (1.26)
21.8 (0.86)
18.2 (0.72)
6
(0.24)
339.4 (13.4)
303 (11.9)
1 (0.04)
63
(2.48)
Unit: mm (inch)
21.8 (0.86)
18.2 (0.72)
104.1 (4.1) 100 (3.9)
• FDX1501T
MAX.22 (0.87)
141.5 (5.6)
104.1 (4.1)
100 (3.9)
Chapter 6 Reference
MAX.22
(0.87)
M4 (Screw holes for
securing the clamper)
M4 (VESA mounting holes)
9.7 (0.38)
129.5 (5.1)
162.8 (6.4)
100 (3.9)
21.9 (0.86)
87.6 (3.45)
37.9 (1.49)
100 (3.9)
24 (0.94)
174 (6.9)
273.2 (10.8)
287.3 (11.3)
141.5 (5.6)
231.2 (9.1)
56.9 (2.24)
42.9 (1.69)
172.5 (6.8)
158.5 (6.2)
331 (13.0)
37.9 (1.49)
383 (15.1)
307.2 (12.1)
341 ± 0.5 (13.4 ± 0.02)
MAX.22 (0.87) Panel opening dimensions
68.2 (2.69)
MAX.22
(0.87)
289 ± 0.5 (11.4 ± 0.02)
Panel opening dimensions
32 (1.26)
339.4 (13.4)
303 (11.9)
6
(0.24)
21.8 (0.86)
18.2 (0.72)
1 (0.04)
63
(2.48)
Unit: mm (inch)
21.8 (0.86)
18.2 (0.72)
31
6-4. Glossary
Clock
The analog signal input monitor needs to reproduce a clock of the same frequency as the dot clock of the
graphics system in use, when the analog signal is converted to a digital signal for image display. This is
called clock adjustment. If the clock pulse is not set correctly, some vertical bars appear on the screen.
DDC/CI (Display Data Channel/Command Interface)
VESA provides the standardization for the interactive communication of the setting information, etc.
between a PC and the monitor.
DVI (Digital Visual Interface)
DVI is a digital interface standard. DVI allows direct transmission of the PC’s digital data without loss.
This adopts the TMDS transmission system and DVI connectors. There are two types of DVI connectors.
One is a DVI-D connector for digital signal input only. The other is a DVI-I connector for both digital and
analog signal inputs.
DVI DMPM (DVI Digital Monitor Power Management)
DVI DMPM is a digital interface power-saving function. The “Monitor ON (operating mode)” and “Active
Off (power-saving mode)” are indispensable for DVI DMPM as the monitor’s power mode.
Gain
This is used to adjust each color parameter for red, green and blue. An LCD monitor displays the color by
the light passing through the panel color filter. Red, green and blue are the three primary colors. All the
colors on the screen are displayed by combining these three colors. The color tone can be changed by
adjusting the light intensity (volume) passing through each color’s filter.
HDCP (High-bandwidth Digital Content Protection)
Digital signal coding system developed to copy-protect the digital contents, such as video, music, etc.
This helps to transmit the digital contents safely by coding the digital contents sent via the DVI or HDMI
connector on the output side and decoding them on the input side.
Any digital contents cannot be reproduced if both of the equipments on the output and input sides are not
applicable to HDCP system.
Phase
Phase means the sampling timing to convert the analog input signal to a digital signal. Phase adjustment is
made to adjust the timing. It is recommended that phase adjustment be made after the clock is adjusted
correctly.
Range Adjustment
Range adjustment controls the signal output levels to display every color gradation. It is recommended that
range adjustment be made before color adjustment.
32
Chapter 6 Reference
Resolution
The LCD panel consists of numerous pixels of specified size, which are illuminated to form images. This
monitor consists of 1024 horizontal pixels and 768 vertical pixels. At a resolution of 1024 × 768, all pixels
are illuminated as a full screen (1:1).
sRGB (Standard RGB)
International standard for color reproduction and color space among peripheral devices (such as monitors,
printers, digital cameras, scanners). As a form of simple color matching for the Internet, colors can be
displayed using tones close to those of the transmission and reception devices.
Temperature
Color temperature is a method to measure the white color tone, generally indicated in degrees Kelvin. The
screen becomes reddish at a low temperature, and bluish at a high temperature, like the flame temperature.
5000K: Slightly reddish white
6500K: White referred to as daylight-balanced color
9300K: Slightly bluish white
TMDS (Transition Minimized Differential Signaling)
TMDS is one of the signal transmission methods for the digital interface.
VESA DPM (Video Electronics Standards Association - Display Power
Management)
VESA specifications achieve increased energy efficiency for computer monitors. This involves
standardization of signals sent from the computer (graphics board).
DPM defines the status of signals transmitted between the computer and monitor.
Chapter 6 Reference
33
6-5. Preset Timing
The following table shows factory preset analog signal timing:
Attention
• Display position may be deviated depending on the PC connected, which may require screen adjustment using
Adjustment menu.
• If a signal other than those listed in the table is input, adjust the screen using the Adjustment menu. However, screen
display may still be incorrect even after the adjustment.
• When interlace signals are used, the screen cannot be displayed correctly even after screen adjustment using the
Adjustment menu.
34
Frequency
Resolution
Applicable
Signals
Dot Clock: MHz
Horizontal: kHz
Vertical: Hz
640 × 400
640 × 400
640 × 480
640 × 480
640 × 480
720 × 400
800 × 600
800 × 600
800 × 600
800 × 600
1024 × 768
1024 × 768
1024 × 768
PC-9801
PC-9821 AP2
VGA
VESA
VESA
VGA TEXT
VESA
VESA
VESA
VESA
VESA
VESA
VESA
21.05
25.18
25.18
31.50
31.50
28.32
36.00
40.00
50.00
49.50
65.00
75.00
78.75
24.83
31.48
31.47
37.86
37.50
31.47
35.16
37.88
48.08
46.88
48.36
56.48
60.02
56.42
70.10
59.94
72.81
75.00
70.09
56.25
60.32
72.19
75.00
60.00
70.07
75.03
Chapter 6 Reference
Appendix
Trademark
VESA is a registered trademark or a trademark of the Video Electronics Standards Association in the United
States and other countries.
Windows, Windows Vista, Windows Media, and Xbox 360 are registered trademarks of Microsoft Corporation
in the United States and other countries.
Apple, Mac, Macintosh, iMac, eMac, Mac OS, MacBook, PowerBook, ColorSync, QuickTime, and iBook are
registered trademarks of Apple Inc.
Acrobat, Adobe, Adobe AIR, and Photoshop are registered trademarks of Adobe Systems Incorporated in the
United States and other countries.
PowerPC is a registered trademark of International Business Machines Corporation.
Pentium is a registered trademark of Intel Corporation in the United States and other countries.
AMD Athlon and AMD Opteron are trademarks of Advanced Micro Devices, Inc.
GRACoL and IDEAlliance are registered trademarks of International Digital Enterprise Alliance.
ColorVision, ColorVision Spyder2 are registered trademarks of DataColor Holding AG.
Spyder3 is a trademark of DataColor Holding AG.
Eye-One, ColorMunki, and X-Rite are registered trademarks or trademarks of X-Rite Incorporated.
TouchWare is a trademark of 3M Touch Systems, Inc.
NextWindow is a registered trademark of NextWindow Ltd.
RealPlayer is a registered trademark of RealNetworks, Inc.
NEC is a registered trademark of NEC Corporation. PC-9801 and PC-9821 are trademarks of NEC
Corporation.
PlayStation is a registered trademark of Sony Computer Entertainment Inc.
PSP and PS3 are trademarks of Sony Computer Entertainment Inc.
ENERGY STAR is a registered trademark of the United States Environmental Protection Agency in the United
States and other countries.
HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of
HDMI Licensing, LLC in the United States and other countries.
EIZO, the EIZO Logo, ColorEdge, DuraVision, FlexScan, FORIS, RadiForce, RadiCS, RadiNET, Raptor, and
ScreenManager are registered trademarks of EIZO NANAO CORPORATION in Japan and other countries.
ColorNavigator, EIZO EasyPIX, EcoView NET, EIZO ScreenSlicer, i • Sound, Screen Administrator and
UniColor Pro are trademarks of EIZO NANAO CORPORATION.
All other company and product names are trademarks or registered trademarks of their respective owners.
Appendix
35
LIMITED WARRANTY
LIMITED WARRANTY
EIZO NANAO CORPORATION (hereinafter referred to as “EIZO”) and distributors authorized by EIZO (hereinafter
referredtoasthe“Distributors”)warrant,subjecttoandinaccordancewiththetermsofthislimitedwarranty(hereinafter
referred to as the “Warranty”), to the original purchaser (hereinafter referred to as the “Original Purchaser”) who
purchasedtheproductspecifiedinthisdocument(hereinafterreferredtoasthe“Product”)fromEIZOorDistributors,
thatEIZOandDistributorsshall,attheirsolediscretion,eitherrepairorreplacetheProductatnochargeiftheOriginal
PurchaserbecomesawarewithintheWarrantyPeriod(definedbelow)thattheProductmalfunctionsorisdamagedinthe
courseofnormaluseoftheProductinaccordancewiththedescriptionintheinstructionmanualattachedtotheProduct
(hereinafterreferredtoasthe“User’sManual”).
The period of this Warranty is two (2) years from the date of purchase of the Product (hereinafter referred to as the
“WarrantyPeriod”).EIZOandDistributorsshallbearnoliabilityorobligationwithregardtotheProductinrelationtothe
OriginalPurchaseroranythirdpartiesotherthanasprovidedunderthisWarranty.
EIZOandDistributorswillceasetoholdorstoreanypartsoftheProductuponexpirationofseven(7)yearsafterthe
productionofsuchpartsisdiscontinued.Inrepairingthemonitor,EIZOandDistributorswilluserenewalpartswhich
complywithourQCstandards.
TheWarrantyisvalidonlyinthecountriesorterritorieswheretheDistributorsarelocated.TheWarrantydoesnotrestrict
anylegalrightsoftheOriginalPurchaser.
NotwithstandinganyotherprovisionofthisWarranty,EIZOandDistributorsshallhavenoobligationunderthisWarranty
whatsoeverinanyofthecasesassetforthbelow:
(a) AnydefectoftheProductcausedbyfreightdamage,modification,alteration,abuse,misuse,accident,incorrect
installation,disaster,faultymaintenanceand/orimproperrepairbythirdpartyotherthanEIZOandDistributors;
(b) AnyincompatibilityoftheProductduetopossibletechnicalinnovationsand/orregulations;
(c) Anydeteriorationofthesensor;
(d) AnydeteriorationofdisplayperformancecausedbythedeteriorationofexpendablepartssuchastheLCDpanel
and/orbacklight,etc.(e.g.changesinbrightness,changesinbrightnessuniformity,changesincolor,changesin
coloruniformity,defectsinpixelsincludingburntpixels,etc.);
(e) AnydefectoftheProductcausedbyexternalequipment;
(f) AnydefectoftheProductonwhichtheoriginalserialnumberhasbeenalteredorremoved;
(g) AnydefectoftheProductcausedbyliquidleakingfrombattery;
(h) Anynormaldeteriorationoftheproduct,particularlythatofconsumables,accessories,and/orattachments(e.g.
batteries,buttons,rotatingparts,remotecontrol,cables,User’sManual,etc.);and
(i) Anydeformation,discoloration,and/orwarpoftheexterioroftheproductincludingthatofthesurfaceoftheLCD
panel.
To obtain service under the Warranty, the Original Purchaser must deliver the Product, freight prepaid, in its original
packageorotheradequatepackageaffordinganequaldegreeofprotection,assumingtheriskofdamageand/orloss
intransit,tothelocalDistributor.TheOriginalPurchasermustpresentproofofpurchaseoftheProductandthedateof
suchpurchasewhenrequestingservicesundertheWarranty.
TheWarrantyPeriodforanyreplacedand/orrepairedproductunderthisWarrantyshallexpireattheendoftheoriginal
WarrantyPeriod.
EIZO OR DISTRIBUTORSARE NOT RESPONSIBLE FORANY DAMAGE TO, OR LOSS OF, DATA OR OTHER
INFORMATIONSTOREDINANYMEDIAORANYPARTOFANYPRODUCTRETURNEDTOEIZOORDISTRIBUTORS
FORREPAIR.
EIZOAND DISTRIBUTORS MAKE NO FURTHER WARRANTIES, EXPRESSED OR IMPLIED, WITH RESPECTTO
THE PRODUCTAND ITS QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FORANY PARTICULAR
USE. IN NO EVENT SHALL EIZO OR DISTRIBUTORS BE LIABLE FORANY INCIDENTAL, INDIRECT, SPECIAL,
CONSEQUENTIAL OR OTHER DAMAGE WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR
LOSSOFPROFIT,BUSINESSINTERRUPTION,LOSSOFBUSINESSINFORMATION,ORANYOTHERPECUNIARY
LOSS)ARISINGOUTOFTHEUSEORINABILITYTOUSETHEPRODUCTORINANYCONNECTIONWITHTHE
PRODUCT,WHETHERBASEDONCONTRACT,TORT,NEGLIGENCE,STRICTLIABILITYOROTHERWISE,EVEN
IFEIZOORDISTRIBUTORSHAVEBEENADVISEDOFTHEPOSSIBILITYOFSUCHDAMAGES.THISEXCLUSION
ALSO INCLUDESANY LIABILITY WHICH MAYARISE OUT OFTHIRD PARTY CLAIMSAGAINSTTHE ORIGINAL
PURCHASER.  THE ESSENCE OF THIS PROVISION IS TO LIMIT THE POTENTIAL LIABILITY OF EIZOAND
DISTRIBUTORSARISINGOUTOFTHISLIMITEDWARRANTYAND/ORSALES.
36
Appendix
BEGRENZTE GARANTIE
EIZONANAOCORPORATION(imWeiterenals„EIZO“bezeichnet)unddieVertragsimporteurevonEIZO(imWeiteren
als „Vertrieb(e)“ bezeichnet) garantieren dem ursprünglichen Käufer (im Weiteren als „Erstkäufer“ bezeichnet), der
dasindiesemDokumentvorgegebeneProdukt(imWeiterenals„Produkt“bezeichnet)vonEIZOodereinemVertrieb
erworbenhat,gemäßdenBedingungendieserbeschränktenGarantie(imWeiterenals„Garantie“bezeichnet),dass
EIZO und der Vertrieb nach eigenem Ermessen das Produkt entweder kostenlos reparieren oder austauschen, falls
derErstkäuferinnerhalbderGarantiefrist(weiteruntenfestgelegt)eineFehlfunktionbzw.BeschädigungdesProdukts
feststellt, die während des normalen Gebrauchs des Produkts gemäß denAnweisungen des zum Lieferumfang des
ProduktsgehörendenBenutzerhandbuchs(imWeiterenals„Benutzerhandbuch“bezeichnet)aufgetretenist.
DieDauerderGarantieleistung(imWeiterenals„Garantiefrist"bezeichnet)beträgtzwei(2)JahreabdemKaufdatum
desProdukts.EIZOunddieVertriebeübernehmenüberdenRahmendieserGarantiehinaushinsichtlichdesProdukts
keinerleiHaftungoderVerpflichtungdemErstkäuferoderDrittengegenüber.
EIZOunddieVertriebeverpflichtensich,ErsatzteilefürdasProduktübereinenZeitraumvonsieben(7)Jahrennach
EinstellungderProduktionderErsatzteilezulagernbzw.anzubieten.EIZOundseineVertriebspartnerverpflichtensich,
beieineretwaigenReparaturdesMonitorsausschließlichProduktegemäßdenEIZO-Qualitätssicherungsstandardszu
verwenden.
Diese Garantie gilt nur in Ländern oder Gebieten, in denen sich Vertriebe befinden. Die gesetzlichen
GewährleistungsrechtedesErstkäufersgegenüberdemVerkäuferwerdendurchdieseGarantienichtberührt.
EIZOunddieVertriebebesitzenimRahmendieserGarantiekeinerleiVerpflichtungindenfolgendenFällen:
(a) Produktdefekte, die auf Frachtschäden, Modifikation, Nachgestaltung, Missbrauch, Fehlbedienung, Unfälle,
unsachgemäßeInstallation,Naturkatastrophen,fehlerhafteWartungund/oderunsachgemäßeReparaturdurcheine
andereParteialsEIZOunddieVertriebezurückzuführensind.
(b) Eine Inkompatibilität des Produkts aufgrund von technischen Neuerungen und/oder neuen Bestimmungen, die
nachdemKaufinKrafttreten.
(c) JeglicheVerschlechterungdesSensors.
(d) Jegliche Verschlechterung der Bildschirmleistung, die durch Verschleißteile wie das LCD-Panel und/oder die
Hintergrundbeleuchtungusw.hervorgerufenwerden(z.B.VeränderungenvonHelligkeitoderHelligkeitsverteilung,
VeränderungenvonFarbeoderFarbverteilung,PixeldefekteeinschließlichvondurchgebranntenPixelnusw.).
(e) Produktdefekte,diedurchexterneGeräteverursachtwerden.
(f) JeglicherDefekteinesProdukts,dessenursprünglicheSeriennummergeändertoderentferntwurde.
(g) Produktdefekte,diedurchAustrittvonBatterieflüssigkeitverursachtwerden.
(h) NormaleAbnutzung des Produkts, insbesondere von Verbrauchsteilen, Zubehörteilen und/oder Beilagen (z.B.
Batterien,Tasten,drehbareTeile,Fernbedienung,Kabel,Benutzerhandbuchusw.);sowie
(i) Verformungen,Verfärbungenund/oderVerziehungenamProduktäußeren,einschließlichderOberflächedesLCDPanels.
Bei Inanspruchnahme der Garantieleistung ist der Erstkäufer verpflichtet, das Produkt auf eigene Kosten und
in der Originalverpackung bzw. einer anderen geeigneten Verpackung, die einen gleichwertigen Schutz gegen
Transportschädenbietet,andenörtlichenVertriebzuübersenden,wobeiderErstkäuferdasTransportrisikogegenüber
Schädenund/oderVerlustträgt.ZumZeitpunktderInanspruchnahmederGarantieleistungmussderErstkäufereinen
Verkaufsbelegvorweisen,aufdemdasKaufdatumangegebenist.
DieGarantiefristfüreinimRahmendieserGarantieausgetauschtesund/oderrepariertesProdukterlischtnachAblauf
derursprünglichenGarantiefrist.
EIZOODERDIEEIZO-VERTRAGSIMPORTEUREHAFTENNICHTFÜRZERSTÖRTEDATENBESTÄNDEODERDIE
KOSTEN DER WIEDERBESCHAFFUNG DIESER DATENBESTÄNDEAUF JEGLICHEN DATENTRÄGERN ODER
TEILENDESPRODUKTS,DIEIMRAHMENDERGARANTIEBEIEIZOODERDENEIZO-VERTRAGSIMPORTEUREN
ZURREPARATUREINGEREICHTWURDEN.
EIZO UND DIE EIZO-VERTRAGSIMPORTEURE GEBEN WEDER EXPLIZITE NOCH IMPLIZITE GARANTIEN
IN BEZUGAUF DIESES PRODUKT UND SEINE QUALITÄT, LEISTUNG, VERKÄUFLICHKEIT ODER EIGNUNG
FÜR EINEN BESTIMMTEN ZWECK.AUF KEINEN FALL SIND EIZO ODER DIE EIZO-VERTRAGSIMPORTEURE
VERANTWORTLICH FÜR JEGLICHE ZUFÄLLIGE, INDIREKTE, SPEZIELLE, FOLGE- ODERANDERE SCHÄDEN
JEGLICHERART (EINSCHLIESSLICH OHNE JEDE BEGRENZUNG SCHÄDEN BEZÜGLICH PROFITVERLUST,
GESCHÄFTSUNTERBRECHUNG, VERLUST VON GESCHÄFTSINFORMATION ODER JEGLICHEANDEREN
FINANZIELLEN EINBUSSEN), DIE DURCH DIE VERWENDUNG DES PRODUKTES ODER DIE UNFÄHIGKEIT
ZUR VERWENDUNG DES PRODUKTES ODER IN JEGLICHER BEZIEHUNG MIT DEM PRODUKT, SEI ES
BASIERENDAUFVERTRAG,SCHADENSERSATZ,NACHLAESSIGKEIT,STRIKTEHAFTPFLICHTODERANDEREN
FORDERUNGEN ENTSTEHEN,AUCH WENN EIZO UND DIE EIZO-VERTRAGSIMPORTEURE IM VORAUS ÜBER
DIEMÖGLICHKEITSOLCHERSCHÄDENINFORMIERTWURDEN.DIESERAUSSCHLUSSENTHÄLTAUCHJEDE
HAFTPFLICHT, DIEAUS FORDERUNGEN DRITTER GEGEN DEN ERSTKÄUFER ENTSTEHEN KANN. ZWECK
DIESERKLAUSELISTES,DIEHAFTUNGVONEIZOUNDDENVERTRIEBENGEGENÜBERFORDERUNGENZU
BEGRENZEN,DIEAUSDIESERBESCHRÄNKTENGARANTIEUND/ODERDEMVERKAUFENTSTEHENKÖNNEN.
Appendix
37
GARANTIE LIMITÉE
EIZONANAOCORPORATION(ci-aprèsdénommé«EIZO »)etlesdistributeursautorisésparEIZO(ci-aprèsdénommés
«Distributeurs »),sousréserveetconformémentauxtermesdecettegarantielimitée(ci-aprèsdénommée«Garantie
»),garantissentàl’acheteurinitial(ci-aprèsdénommé«Acheteur initial »)duproduitspécifiédanslaprésente(ci-après
dénommé«Produit »)achetéauprèsd’EIZOoudeDistributeursagréésEIZO,queEIZOetsesDistributeursauront
pouroptionderéparerouremplacergratuitementleProduitsil’Acheteurinitialconstate,pendantlaPériodedegarantie
(définieci-dessous),qu’ilyaundysfonctionnementouqueleProduitasubiundommagedanslecadred’uneutilisation
normaleduProduitconformémentàladescriptiondumoded’emploiquiaccompagneleProduit(ci-aprèsdénommé«
Manuel d’utilisation »).
LapériodedecetteGarantieestdedeux(2)ansàpartirdeladated’achatduProduit(ci-aprèsdénommée«Périodede
Garantie»).EIZOetsesDistributeursdéclinenttouteresponsabilitéouobligationconcernantceProduitfaceàl’Acheteur
initialouàtouteautrepersonneàl’exceptiondecellesstipuléesdanslaprésenteGarantie.
EIZO et ses Distributeurs cesseront de tenir ou conserver en stock toute pièce de ce Produit après l’expiration de
la période de sept (7) ans suivant l’arrêt de la production de telles pièces. Pour réparer le moniteur, EIZO et ses
distributeursutiliserontdespiècesderechangeconformesànosnormesdecontrôlequalité.
LaGarantieestvalableuniquementdanslespaysoulesterritoiresoùsetrouventlesDistributeurs.LaGarantienelimite
aucundesdroitsreconnusparlaloiàl’Acheteurinitial.
NonobstanttouteautreclausedecetteGarantie,EIZOetsesDistributeursn’aurontd’obligationdanslecadredecette
Garantiepouraucundescasénumérésci-dessous:
(a) ToutdéfautduProduitrésultantdedommagesoccasionnéslorsdutransport,d’unemodification,d’unealtération,
d’unabus,d’unemauvaiseutilisation,d’unaccident,d’uneinstallationincorrecte,d’undésastre,d’unentretienet/
oud’uneréparationincorrectseffectuésparunepersonneautrequeEIZOousesDistributeurs;
(b) TouteincompatibilitéduProduitrésultantd’améliorationstechniqueset/ouréglementationspossibles;
(c) Toutedétériorationducapteur;
(d) Toute détérioration des performances d’affichage causée par la détérioration des éléments consommables tels
quelepanneauLCDet/oulerétroéclairage,etc.(parexempledeschangementsdeluminosité,deschangements
del’uniformitédelaluminosité,desmodificationsdecouleur,deschangementsdel’uniformitédescouleurs,des
défectuositésdepixelsycomprisdespixelsbrûlés,etc.);
(e) ToutdéfautduProduitcauséparunappareilexterne;
(f) Toutdéfautd’unProduitsurlequellenumérodesérieoriginalaétéaltéréousupprimé;
(g) ToutdéfautduProduitcauséparunécoulementduliquidecontenudanslespiles;
(h) Toute détérioration normale du Produit, particulièrement celle des consommables, des accessoires et/ou des
piècesreliéesauProduit(piles,touches,élémentspivotants,télécommande,câbles,Manueld’utilisationetc.),et
(i) Toute déformation, décoloration, et/ou gondolage de l’extérieur du Produit, y compris celle de la surface du
panneauLCD.
Pourbénéficierd’unservicedanslecadredecetteGarantie,l’AcheteurinitialdoitrenvoyerleProduitportpayé,dans
sonemballaged’origineoutoutautreemballageappropriéoffrantundegrédeprotectionéquivalent,auDistributeurlocal,
etassumeralaresponsabilitédesdommageset/oupertepossibleslorsdutransport.L’Acheteurinitialdoitprésenterune
preuved’achatduProduitcomprenantsadated’achatpourbénéficierdeceservicedanslecadredelaGarantie.
LaPériodedegarantiepourtoutProduitremplacéet/ouréparédanslecadredecetteGarantieexpireraàlafindela
Périodedegarantieinitiale.
EIZOOUSESDISTRIBUTEURSNESAURAIENTÊTRETENUSRESPONSABLESDESDOMMAGESOUPERTESDE
DONNÉESOUD’AUTRESINFORMATIONSSTOCKÉESDANSUNMÉDIAQUELCONQUEOUUNEAUTREPARTIE
DUPRODUITRENVOYÉÀEIZOOUAUXDISTRIBUTEURSPOURRÉPARATION.
AUCUNEAUTRE GARANTIE, EXPLICITE OU TACITE, N’EST OFFERTE PAR EIZO ET SES DISTRIBUTEURS
CONCERNANT LE PRODUIT ET SES QUALITÉS, PERFORMANCES, QUALITÉ MARCHANDE OUADAPTATION
À UN USAGE PARTICULIER. ENAUCUN CAS, EIZO OU SES DISTRIBUTEURS NE SERONT RESPONSABLES
DES DOMMAGES FORTUITS, INDIRECTS, SPÉCIAUX, INDUITS, OU DE TOUTAUTRE DOMMAGE QUEL
QU’IL SOIT (Y COMPRIS, SANS LIMITATION, LES DOMMAGES RÉSULTANT D’UNE PERTE DE PROFIT, D’UNE
INTERRUPTION D’ACTIVITÉS, D’UNE PERTE DE DONNÉES COMMERCIALES, OU DETOUTAUTRE MANQUE
À GAGNER) RÉSULTANT DE L’UTILISATION OU DE L’INCAPACITÉ D’UTILISER LE PRODUIT OUAYANT UN
RAPPORTQUELCONQUEAVECLEPRODUIT,QUECESOITSURLABASED’UNCONTRAT,D’UNTORT,D’UNE
NÉGLIGENCE,D’UNERESPONSABILITÉSTRICTEOUAUTRE,MÊMESIEIZOOUSESDISTRIBUTEURSONTÉTÉ
AVERTISDELAPOSSIBILITÉDETELSDOMMAGES.CETTELIMITATIONINCLUTAUSSITOUTERESPONSABILITÉ
QUI POURRAIT ÊTRE SOULEVÉE LORS DES RÉCLAMATIONS D’UN TIERS CONTRE L’ACHETEUR INITIAL.
L’ESSENCE DE CETTE CLAUSE EST DE LIMITER LA RESPONSABILITÉ POTENTIELLE DE EIZO ET DE SES
DISTRIBUTEURSRÉSULTANTDECETTEGARANTIELIMITÉEET/OUDESVENTES.
38
Appendix
GARANTÍA LIMITADA
EIZO NANAO CORPORATION (en lo sucesivo “EIZO”) y sus distribuidores autorizados (en lo sucesivo los
“Distribuidores”),conarregloydeconformidadconlostérminosdeestagarantíalimitada(enlosucesivola“Garantía”),
garantizanalcompradororiginal(enlosucesivoel“Comprador original”)quecompróelproductoespecificadoeneste
documento(enlosucesivoel“Producto”)aEIZOoasusDistribuidores,queEIZOysusDistribuidores,asupropio
criterio,repararánosustituiránelProductodeformagratuitasielCompradororiginaldetectadentrodelperiododela
Garantía (indicado posteriormente) que el Productonofuncionacorrectamenteoquesehaaveriadoduranteeluso
normal del mismo de acuerdo con las indicacionesdelmanualdeinstruccionessuministradoconelProducto(enlo
sucesivoel“Manual del usuario”).
ElperiododeestaGarantíaesdedos(2)añosapartirdelafechadecompradelProducto(enadelantedesignadocomo
el“PeriododeGarantía”).EIZOysusDistribuidoresnotendránningunaresponsabilidadniobligaciónconrespectoal
ProductoparaconelCompradororiginalnicontercerosquenoseanlasestipuladasenlapresenteGarantía.
EIZOysusDistribuidoresnoestaránobligadosasuministrarcualquierrecambiodelProductounavezpasadossiete
(7)añosdesdequesedejedefabricarelmismo.Paralareparacióndelmonitor,EIZOylosdistribuidoresutilizarán
repuestosquecumplanconnuestrosestándaresdecontroldecalidad.
LaGarantíaesválidasóloenlospaísesyterritoriosdondeestánubicadoslosDistribuidores.LaGarantíanorestringe
ningúnderecholegaldelCompradororiginal.
A pesar de las estipulaciones de esta Garantía, EIZO y sus Distribuidores no tendrán obligación alguna bajo esta
Garantíaenningunodeloscasosexpuestosacontinuación:
(a) CualquierdefectodelProductocausadopordañoseneltransporte,modificación,alteración,abuso,usoincorrecto,
accidente, instalación incorrecta, desastre, mantenimiento incorrecto y/o reparación indebida realizada por un
terceroquenoseaEIZOosusDistribuidores.
(b) CualquierincompatibilidaddelProductodebidaaposiblesinnovacionestécnicasy/oreglamentaciones.
(c) Cualquierdeteriorodelsensor.
(d) Cualquierdeterioroenelrendimientodelavisualizacióncausadoporfallosenlaspiezasconsumiblescomoel
panelLCDy/ola"Backlight",etc.(p.ej.cambiosdebrillo,cambiosdeuniformidaddelbrillo,cambiosdecolor,
cambiosdeuniformidaddelcolor,defectosdepíxeles,incluyendopíxelesmuertos,etc.).
(e) CualquierdefectodelProductocausadoporunequipoexterno.
(f) CualquierdefectodelProductoenelquehayasidoalteradooborradoelnúmerodeserieoriginal.
(g) CualquierdefectodelProductocasusadoporfugasdelíquidodelaspilas.
(h) CualquierdeterioronormaldelProducto,yenparticulardelaspiezasconsumibles,accesoriosydemás(p.ej.
pilas,botones,piezasgiratorias,mandoadistancia,cables,Manualdelusuario,etc.).
(i) Cualquierdeformación,decoloracióny/oalabeodelexteriordelProductoincluidalasuperficiedelpanelLCD.
Para obtener servicio en los términos de esta Garantía, el Producto deberá ser enviado por el Comprador original,
asuDistribuidorlocal,coneltransportepreviamentepagado,enelembalajeoriginaluotroembalajeadecuadoque
ofrezcaelmismogradodeprotección,asumiendoelriesgodedañosy/opérdidadelProductoduranteeltransporte.El
CompradororiginaldeberápresentaruncomprobantedecompradelProductoenelquesereflejelafechadecompra
delmismocuandolosoliciteelserviciodeGarantía.
ElPeriododegarantíaparacualquierProductoreemplazadoy/oreparadoenlostérminosdeestaGarantíaexpiraráal
vencerelPeriododegarantíaoriginal.
EIZO O LOS DISTRIBUIDORESAUTORIZADOS DE EIZO NO SE RESPONSABILIZAN DE NINGÚN DAÑO O
PÉRDIDAQUEPUEDANSUFRIRLOSDATOSUOTRAINFORMACIÓNALMACENADAENCUALQUIERMEDIOO
CUALQUIERPARTEDECUALQUIERPRODUCTODEVUELTOAEIZOOALOSDISTRIBUIDORESDEEIZOPARA
SUREPARACIÓN.
EIZOY LOS DISTRIBUIDORESAUTORIZADOS DE EIZO NO OFRECEN NINGUNA OTRA GARANTÍA, IMPLÍCITA
NI EXPLÍCITA, CON RESPECTOAL PRODUCTO YA SU CALIDAD, RENDIMIENTO, COMERCIABILIDAD E
IDONEIDADPARACUALQUIERUSOENPARTICULAR.ENNINGÚNCASOSERÁNEIZOOLOSDISTRIBUIDORES
AUTORIZADOSDEEIZORESPONSABLESDENINGÚNDAÑOEMERGENTE,INDIRECTO,ESPECIAL,INHERENTE
O CUALQUIERA QUE SEA (INCLUYENDO, SIN LIMITACIÓN, DAÑOS POR LUCRO CESANTE, INTERRUPCIÓN
DE LAACTIVIDAD COMERCIAL, PÉRDIDA DE INFORMACIÓN COMERCIAL O CUALQUIER OTRA PÉRDIDA
PECUNIARIA)QUESEDERIVEDELUSOOIMPOSIBILIDADDEUSODELPRODUCTOOENRELACIÓNCONEL
PRODUCTO,YA SEA BASADO EN CONTRATO, PORAGRAVIO, NEGLIGENCIA, ESTRICTA RESPONSABILIDAD
O CUALQUIERA QUE SEA,AUN CUANDO SE HAYAADVERTIDOA EIZO OA LOS DISTRIBUIDORES DE EIZO
DELAPOSIBILIDADDETALESDAÑOS.ESTAEXCLUSIÓNTAMBIÉNABARCACUALQUIERRESPONSABILIDAD
QUE PUEDA DERIVARSE DE RECLAMACIONES HECHAS POR UN TERCERO CONTRA EL COMPRADOR
ORIGINAL.LAESENCIADEESTAESTIPULACIÓNESLIMITARLARESPONSABILIDADPOTENCIALDEEIZOYLOS
DISTRIBUIDORESQUEPUDIERADERIVARSEDEESTAGARANTÍALIMITADAY/OVENTAS.
Appendix
39
GARANZIA LIMITATA
EIZONANAOCORPORATION(acuisifaràriferimentodaquiinpoicon“EIZO”)ediDistributoriautorizzatidaEIZO(a
cuisifaràriferimentodaquiinpoicon“Distributori”)garantiscono,secondoiterminidiquestagaranzialimitata(acuisi
faràriferimentodaquiinpoicon“Garanzia”)all’acquirenteoriginale(acuisifaràriferimentodaquiinpoicon“Acquirente
originale”) che ha acquistato il prodotto specificato in questo documento (a cui si farà riferimento da qui in poi con
“Prodotto”)daEIZOodaisuoiDistributori,cheEIZOeidistributori,alorodiscrezione,riparerannoosostituirannoil
Prodottosenzaaddebitosel’Acquirenteoriginaletrova,entroilperiododellaGaranzia(definitosotto),cheilProdotto
malfunzionaesièdanneggiatonelcorsodelsuonormaleutilizzoosservandoleindicazionidelmanualediistruzioni
allegatoalProdotto(acuisifaràriferimentodaquiinpoicon“Manuale utente”).
IlperiododiquestaGaranziaèdidue(2)annidalladatadiacquistodelProdotto(acuisifaràriferimentodaquiinpoi
con“PeriododiGaranzia”).EIZOeisuoiDistributorinonsiassumonoalcunaresponsabilitàenonhannoalcunobbligo
riguardoalProdottoversol’AcquirenteoriginaleoterzidiversidaquellirelativiaquestaGaranzia.
EIZO e i suoi Distributori cesseranno di tenere o di conservare qualsiasi ricambio del Prodotto allo scadere di sette
(7) anni dopo che la produzione di tali ricambi èstataterminata.Perlariparazionedelmonitor,EIZOeiDistributori
utilizzerannopartidiricambioconformiainostristandarddicontrollodellaqualità.
La Garanzia è valida soltanto nei paesi dove ci sono i Distributori EIZO. La Garanzia non limita alcun diritto legale
dell’Acquirenteoriginale.
IndipendentementedaqualsiasialtracondizionediquestaGaranzia,EIZOeisuoiDistributorinonavrannoalcunobbligo
derivantedaquestaGaranziainognunodeicasielencatidiseguito:
(a) QualsiasidifettodelProdottocausatodadanniditrasporto,modifiche,alterazioni,abusi,usiimpropri,incidenti,
installazioneerrata,calamità,manutenzioneerratae/oriparazioniimproprieeseguitedaterzepartichenonsiano
EIZOoisuoiDistributori.
(b) QualsiasiincompatibilitàdelProdottodovutaapossibiliinnovazionitecnichee/onormative.
(c) Qualsiasideterioramentodelsensore.
(d) Qualsiasideterioramentodelleprestazionidelloschermocausatodaldeterioramentodelleparticonsumabili,come
ilpannelloLCDe/olaretroilluminazione,ecc.(peresempio:icambiamentidiluminosità,cambiamentidiuniformità
della luminosità, i cambiamenti di colore, i cambiamenti di uniformità del colore, i difetti dei pixel, inclusi i pixel
bruciati,ecc.).
(e) QualsiasidifettodelProdottocausatodaapparecchiatureesterne.
(f) QualsiasidifettodelProdottoincuiilnumerodiserieoriginalesiastatoalteratoorimosso.
(g) QualsiasidifettodelProdottocausatodallafuoriuscitadiliquidodallepile.
(h) Qualsiasi normale deterioramento del Prodotto, in particolar modo nelle sue parti di consumo, accessori, e/o
attacchi(peresempio:pile,tasti,partirotanti,telecomando,cavi,Manualedell’utente,ecc.).
(i) Qualsiasitipodideformazione,scolorimento,e/odiinvolucroesternodelProdottoinclusalasuperficiedelpannello
LCD.
Per ricevere assistenza tecnica con questa Garanzia, l’Acquirente originale deve inviare il Prodotto, con trasporto
pre-pagato, nella sua confezione originale o altraconfezioneadeguatachefornisceunlivelloanalogodiprotezione,
assumendosiilrischiodidannie/operditaintransito,alDistributorelocale.L’Acquirenteoriginaledevepresentarela
provadiacquistochestabilisceladatadiacquistodelProdottoquandorichiedeserviziosottoGaranzia.
IlPeriododigaranziaperqualsiasiProdottosostituitoe/oriparatosottoquestaGaranziascadeallafinedelPeriododi
garanziaoriginale.
EIZOOISUOIDISTRIBUTORINONSONORESPONSABILIPERQUALSIASIDANNOOPERDITADIDATIOALTRE
INFORMAZIONI MEMORIZZATI SU QUALSIASI SUPPORTO O QUALSIASI PARTE DI QUALSIASI PRODOTTO
INVIATOAEIZOOISUOIDISTRIBUTORIPERRIPARAZIONI.
EIZO E I SUOI DISTRIBUTORI NON OFFRONOALCUNA GARANZIAADDIZIONALE, IMPLICITA O ESPLICITA,
RIGUARDO IL PRODOTTO E LA SUA QUALITÀ, PRESTAZIONI, VENDIBILITÀ OAPPROPRIATEZZA PER
QUALSIASI USO PARTICOLARE. IN NESSUN CASO EIZO O I DISTRIBUTORI EIZOAUTORIZZATI SARANNO
RESPONSABILI PER QUALSIASI DANNOACCIDENTALE, INDIRETTO, SPECIALE, CONSEGUENTE O DI
QUALSIASIALTRANATURA(INCLUSI,SENZALIMITI,DANNIPERPERDITADIPROFITTI,INTERRUZIONEDELLE
ATTIVITÀ, PERDITA DI INFORMAZIONI D’AFFARI O QUALSIASIALTRA PERDITA PECUNIARIA) DERIVANTI
DALL’USO O DALL’IMPOSSIBILITÀ DI USARE IL PRODOTTO O IN QUALSIASI RELAZIONEAL PRODOTTO,
SIA SU BASE DI CONTRATTO, TORTO, NEGLIGENZA, STRETTA RESPONSABILITÀ OALTRIMENTI,ANCHE
SE EIZO O I DISTRIBUTORI EIZOAUTORIZZATI SONO STATIAVVERTITI DELLA POSSIBILITÀ DITALI DANNI.
QUESTAESCLUSIONEINCLUDEANCHEQUALSIASIRESPONSABILITÀCHEPOSSAINSORGEREDARECLAMI
DI TERZI CONTRO L’ACQUIRENTE ORIGINALE. L’ESSENZA DI QUESTO PROVVEDIMENTO È LIMITARE LA
RESPONSABILITÀPOTENZIALEDIEIZOEDEIDISTRIBUTORIDERIVANTEDAQUESTAGARANZIALIMITATAE/O
DALLEVENDITE.
40
Appendix
BEGRÄNSAD GARANTI
EIZO NANAO CORPORATION (nedan kallat “EIZO”) och EIZOs auktoriserade distributörer (nedan kallade
“Distributörer”) garanterar i enlighet med villkoren i denna begränsade garanti (nedan kallad “Garantin”) den
ursprungligeköparen(nedankalladden“Ursprunglige köparen”)somköptedenidokumentetspecificeradeprodukten
(nedankallad“Produkten”)frånEIZOellerDistributörer,attEIZOellerDistributörerenligtegetgottfinnandekostnadsfritt
antingenrepareraellerbytautdendefektaProduktenomdenUrsprungligeköpareninomGarantiperioden(definieras
nedan)upptäckerattProduktenfungerarfelaktigtellerskadasundernormalanvändningavProduktenienlighetmed
beskrivningenibruksanvisningen(nedankallad“Bruksanvisning”).
Garantiperiodenärbegränsadtilltvå(2)årfråndatumetförProduktensinköp(härkallad”Garantiperioden”).EIZOoch
DistributörerskainteundernågravillkorhanågotannatansvaränvadsomangesidennagarantigällandeProdukteni
relationtilldenUrsprungligeköparenellertredjepart.
EIZOochDistributörerkommerattupphöramedlagerhållningavProduktensdelareftersju(7)årefterattproduktionen
av dessa delar upphört. Nät skärmen repareras använder EIZO och distributörer reservdelar som uppfyller våra
kvalitetsstandarder.
Garantin är endast giltig i de länder där det finns Distributörer. Garantin begränsar inte några av den Ursprunglige
köparenslagstadgaderättigheter.
OavsettandravillkoridennagarantiskainteEIZODistributörerundernågravillkorhanågotansvarinågotavdefall
sombeskrivsnedan:
(a) När någon bristfällighet hos Produkten kan härledas till att ha uppstått vid frakt, modifiering, ändring, felaktigt
handhavande,olycka,felaktiginstallation,katastrof,felaktigtunderhålloch/ellerfelaktigreparationutfördavtredje
partannanänEIZOochDistributörer.
(b) AllaformeravinkompatibilitethosProduktenpågrundavmöjligatekniskainnovationeroch/ellerbestämmelser.
(c) Allaförsämringaravsensorn.
(d) Alla försämringar av bildens prestanda beroende på förbrukningsdelar så som LCD-panel och/eller
bakgrundsbelysningetc.(t.ex.ändringariljusstyrka,jämnhetiljusstyrka,färg,färgjämnhet,defektapixlaroch/eller
fastlysandepixlaretc.).
(e) AlladefekterhosProduktensomorsakatsavexternutrustning.
(f) AlladefekterhosProduktenpåvilkendetursprungligaserienumretharändratselleravlägsnats.
(g) Allaproduktfelsomorsakasavvätskasomläckerfrånbatteriet.
(h) All normal försämring av Produkten, speciellt förbrukningsartiklar, tillbehör och/eller yttre delar (t.ex. batterier,
knappar,roterandedelar,fjärrkontroll,kablar,Bruksanvisningenetc.).
(i) Varjedeformation,missfärgningoch/ellerskevhetavProduktensyttreinklusiveytanpåLCD-panelen.
För att erhålla service under denna garanti måste den Ursprunglige köparen (med hänseende till risken för skada
och/ellerförlustundertransport)levereraProduktentillnärmasteDistributörmedförebetaldfrakt,idessursprungliga
förpackning eller annan fullgod förpackning som ger likvärdigt skydd. Den Ursprunglige köparen måste kunna visa
inköpsbevisförProduktensomklargörProduktensinköpsdatumvidbegäranavgarantiservice.
Garantiperiodenförallautbyttaoch/ellerrepareradeprodukterunderdennagarantiskallupphöravidutgångenavden
ursprungligaGarantiperioden.
EIZOELLERDISTRIBUTÖRERÄRINTEANSVARIGAFÖRNÅGONFORMAVSKADAELLERFÖRLUSTAVDATA
ELLERANNAN INFORMATION SOM HAR LAGRATS I NÅGON FORMAV MEDIA ELLERANNAN DELAV NÅGON
PRODUKTSOMHARRETURNERATSTILLEIZOELLERDISTRIBUTÖRERFÖRREPARATION.
EIZO OCH DISTRIBUTÖRERNA GARANTERAR INGET, UTTRYCKLIGEN ELLER UNDERFÖRSTÅTT, VAD
BETRÄFFARPRODUKTENOCHDESSKVALITET,PRESTANDA,SÄLJBARHETELLERLÄMPLIGHETFÖRNÅGON
FORMAVSPECIELLANVÄNDNING.UNDERINGAOMSTÄNDIGHETERSKALLEIZOELLERDISTRIBUTÖRERNA
HÅLLASANSVARIGAFÖRNÅGRASOMHELSTUNDERORDNADE,INDIREKTA,SPECIELLA,DÄRAVFÖLJANDE
ELLER ÖVRIGA SKADOR (INKLUSIVE, UTAN BEGRÄNSNING TILL, SKADOR FÖR FÖRLUSTAV INKOMST,
AVBRUTENAFFÄRSRÖRELSE,FÖRLUSTAVAFFÄRSINFORMATIONELLERANNANSÄRSKILDFÖRLUST)SOM
UPPSTÅTT SOM ETT RESULTATAVANVÄNDNING ELLER OFÖRMÅGAATTANVÄNDA PRODUKTEN ELLER I
NÅGON FORMAVANSLUTNINGTILL PRODUKTERNA, VARE SIG DETTA GRUNDAS PÅ KONTRAKT, ÅTALBAR
HANDLING,FÖRSUMLIGHET,ANSVARSSKYLDIGHETELLERANNAT,ÄVENOMEIZOELLERDISTRIBUTÖRERNA
HAR INFORMERATS BETRÄFFANDE MÖJLIGHETATT SÅDANA SKADOR FÖRELIGGER. DETTA UNDANTAG
OMFATTARÄVENALLFORMAVANSVARSSKYLDIGHETSOMKANUPPSTÅGENOMENTREDJEPARTSANSPRÅK
GENTEMOTDENURSPRUNGLIGEKÖPAREN.GRUNDBESTÅNDSDELENIBESTÄMMELSENÄRATTBEGRÄNSA
DETEVENTUELLAANSVARSTAGANDETFÖREIZOOCHDISTRIBUTÖRERNASOMKANUPPSTÅGENOMDENNA
BEGRÄNSADEGARANTIOCH/ELLERFÖRSÄLJNING.
Appendix
41
ΠΕΡΙΟΡΙΣΜΕΝΗ ΕΓΓΥΗΣΗ
ΗEIZONANAOCORPORATION(στοεξής«EIZO»)καιοιδιανομείςπουεξουσιοδοτείηEIZO(στοεξής«Διανομείς»)
παρέχουν εγγύηση, υποκείμενη και σύμφωνα με τους όρους της παρούσας περιορισμένης εγγύησης (στο εξής
«Εγγύηση»),στοναρχικόαγοραστή(στοεξής«Αρχικός Αγοραστής»)οοποίοςαγόρασετοπροϊόνπουκαθορίζεταιστο
παρόνέγγραφο(στοεξής«Προϊόν»)απότηνEIZOήτουςΔιανομείς,ηοποίαεξασφαλίζειότιηEIZOκαιοιΔιανομείς,
σύμφωναμετηδιακριτήευχέρειάτους,είτεθαεπισκευάσουνείτεθααντικαταστήσουντοΠροϊόνχωρίςχρέωσηεάνο
ΑρχικόςΑγοραστής αντιληφθεί εντός της ΠεριόδουΕγγύησης(ορίζεταικατωτέρω)ότιτοΠροϊόνδυσλειτουργείήέχει
υποστείβλάβηκατάτηδιάρκειακανονικήςχρήσηςτουΠροϊόντοςσύμφωναμετηνπεριγραφήστοεγχειρίδιοχρήσηςπου
συνοδεύειτοΠροϊόν(στοεξής«Εγχειρίδιο Χρήστη»).
ΗπερίοδοςτηςπαρούσαςΕγγύησηςείναιδύο(2)έτηαπότηνημερομηνίααγοράςτουΠροϊόντος(στοεξής«Περίοδος
Εγγύησης»).ΗEIZOκαιοιΔιανομείςδενφέρουνκαμίαευθύνηήυποχρέωσηόσοναφοράτοΠροϊόνσεσχέσημετον
ΑρχικόΑγοραστήήοποιοδήποτετρίτομέρος,ούτεάλληευθύνηδιαφορετικήαπόαυτήνπουπαρέχεταιστηνπαρούσα
Εγγύηση.
ΗEIZOκαιοιΔιανομείςθαπαύσουνναδιατηρούνήνααποθηκεύουντυχόνεξαρτήματατουΠροϊόντοςκατόπιντηςλήξης
τωνεπτά(7)ετώνμετάτηδιακοπήτηςπαραγωγήςτέτοιωνεξαρτημάτων.Κατάτηνεπισκευήτηςοθόνης,ηEIZOκαιοι
ΔιανομείςθαχρησιμοποιήσουνανταλλακτικάεπισκευήςπουσυμμορφώνονταιμεταπρότυπάμαςγιατηΔιασφάλιση
Ποιότητας.
Η Εγγύηση ισχύει μόνο σε χώρες ή περιοχές όπου βρίσκονται οιΔιανομείς. Η Εγγύηση δεν περιορίζει οποιαδήποτε
νόμιμαδικαιώματατουΑρχικούΑγοραστή.
ΛαμβανομένηςυπόψηκάθεδιάταξηςτηςπαρούσαςΕγγύησης,ηEIZOκαιοιΔιανομείςδενθαέχουνκαμίααπολύτως
υποχρέωσησύμφωναμετηνπαρούσαΕγγύησησεοποιαδήποτεαπότιςπεριπτώσειςπουδιατυπώνονταικατωτέρω:
(α) ΤυχόνελάττωματουΠροϊόντοςπουπροκαλείταιαπόζημιάκατάτημεταφορά,τροποποίηση,αλλαγή,κατάχρηση,
λανθασμένη χρήση, ατύχημα, λανθασμένηεγκατάσταση,καταστροφή,εσφαλμένησυντήρησηή/καιλανθασμένη
επισκευήαπότρίτομέροςεκτόςτηςEIZOκαιτωνΔιανομέων,
(β) ΤυχόνασυμβατότητατουΠροϊόντοςλόγωπιθανώντεχνικώνκαινοτομιώνή/καικανονισμών,
(γ) Τυχόνεπιδείνωσητουαισθητήρα,
(δ) Τυχόν επιδείνωση της απόδοσης οθόνης που προκαλείται από τη φθορά αναλώσιμων εξαρτημάτων όπως
της οθόνης LCD ή/και του φωτός υποβάθρου, κτλ. (π.χ. αλλαγές στη φωτεινότητα, αλλαγές στην ομοιομορφία
φωτεινότητας,αλλαγέςστοχρώμα,αλλαγέςστηνομοιομορφίαχρώματος,ελαττώματασεpixelπεριλαμβανομένων
τωνκαμένωνpixel,κτλ.),
(ε) ΤυχόνελάττωματουΠροϊόντοςπουπροκαλείταιαπόεξωτερικόεξοπλισμό,
(στ)ΤυχόνελάττωματουΠροϊόντοςστοοποίοέχειτροποποιηθείήαφαιρεθείογνήσιοςαριθμόςσειράς,
(ζ) ΤυχόνελάττωματουΠροϊόντοςπουπροκαλείταιαπόδιαρροήυγρούαπότηνμπαταρία,
(η) Τυχόν φυσιολογική φθορά του προϊόντος, ιδιαίτερα αυτής των αναλώσιµων, των αξεσουάρ ή/και των
προσαρτηµάτων(π.χ.μπαταρίες,κουµπιά,περιστρεφόµεναµέρη,τηλεχειριστήριο,καλώδια,ΕγχειρίδιοΧρήστη,
κτλ.),και
(θ) Τυχόν παραμόρφωση, αποχρωματισμό ή/και διαστρέβλωση του εξωτερικού μέρους του προϊόντος,
περιλαμβανομένηςτηςεπιφάνειαςτηςοθόνηςLCD.
ΟΑρχικόςΑγοραστήςγιαναδικαιούταιυπηρεσίεςεπισκευήςσύμφωναμετηνΕγγύηση,θαπρέπειναπαραδώσειτο
Προϊόν, με πληρωμένα τα μεταφορικά έξοδα, στηναρχικήτουσυσκευασίαήσεάλληεπαρκήσυσκευασίαμεισότιμο
βαθμόπροστασίας,αναλαμβάνονταςτονκίνδυνοβλάβηςή/καιαπώλειαςκατάτημεταφορά,στοντοπικόΔιανομέα.Ο
ΑρχικόςΑγοραστήςότανζητάυπηρεσίεςεπισκευήςσύμφωναμετηνΕγγύηση,θαπρέπειναπροσκομίζειτηναπόδειξη
αγοράςτουΠροϊόντοςκαιτηνημερομηνίατηςαγοράς.
Η Περίοδος Εγγύησης για οποιοδήποτε αντικατεστημένο ή/και επισκευασμένο προϊόν σύμφωνα με την παρούσα
ΕγγύησηλήγειστοτέλοςτηςαρχικήςΠεριόδουΕγγύησης.
Η EIZO Ή ΟΙΔΙΑΝΟΜΕΙΣΔΕΝ ΕΥΘΥΝΟΝΤΑΙ ΓΙΑ ΟΠΟΙΑΔΗΠΟΤΕ ΒΛΑΒΗ ΉΑΠΩΛΕΙΑΔΕΔΟΜΕΝΩΝ ΉΑΛΛΩΝ
ΠΛΗΡΟΦΟΡΙΩΝ ΠΟΥΑΠΟΘΗΚΕΥΟΝΤΑΙ ΣΕ ΟΠΟΙΟΔΗΠΟΤΕ ΜΕΣΟ Ή ΟΠΟΙΟΔΗΠΟΤΕΑΛΛΟ ΜΕΡΟΣ ΣΕ
ΟΠΟΙΟΔΗΠΟΤΕΠΡΟΪΟΝΠΟΥΕΠΙΣΤΡΕΦΕΤΑΙΣΤΗΝEIZOΉΣΕΔΙΑΝΟΜΕΑΓΙΑΕΠΙΣΚΕΥΗ.
Η EIZO ΚΑΙ ΟΙΔΙΑΝΟΜΕΙΣΔΕΝ ΠΑΡΕΧΟΥΝ ΚΑΜΙΑ ΠΕΡΑΙΤΕΡΩ ΕΓΓΥΗΣΗ, ΡΗΤΗ Ή ΣΥΝΕΠΑΓΟΜΕΝΗ, ΟΣΟΝ
ΑΦΟΡΑΤΟ ΠΡΟΪΟΝ ΚΑΙΤΗΝ ΠΟΙΟΤΗΤΑ,ΤΗΝΑΠΟΔΟΣΗ,ΤΗΝ ΕΜΠΟΡΕΥΣΙΜΟΤΗΤΑ ΉΤΗΝ ΚΑΤΑΛΛΗΛΟΤΗΤΑ
ΤΟΥ ΓΙΑ ΟΠΟΙΑΔΗΠΟΤΕ ΣΥΓΚΕΚΡΙΜΕΝΗ ΧΡΗΣΗ. ΣΕ ΚΑΜΙΑ ΠΕΡΙΠΤΩΣΗ Η EIZO Ή ΟΙΔΙΑΝΟΜΕΙΣΔΕΝ
ΘΑ ΕΥΘΥΝΟΝΤΑΙ ΓΙΑ ΚΑΜΙΑΑΠΟΛΥΤΩΣ ΤΥΧΑΙΑ, ΕΜΜΕΣΗ, ΕΙΔΙΚΗ, ΣΥΝΕΠΑΓΟΜΕΝΗ ΉΑΛΛΗ ΒΛΑΒΗ
(ΠΕΡΙΛΑΜΒΑΝΟΜΕΝΩΝ, ΜΕΤΑΞΥΑΛΛΩΝ, ΒΛΑΒΩΝ ΉΑΠΩΛΕΙΑΣ ΚΕΡΔΩΝ,ΔΙΑΚΟΠΗΣ ΕΠΙΧΕΙΡΗΜΑΤΙΚΩΝ
ΔΡΑΣΤΗΡΙΟΤΗΤΩΝ,ΑΠΩΛΕΙΑΣΕΠΙΧΕΙΡΗΜΑΤΙΚΩΝΠΛΗΡΟΦΟΡΙΩΝΉΤΥΧΟΝΑΛΛΗΣΧΡΗΜΑΤΙΚΗΣΑΠΩΛΕΙΑΣ)
ΠΟΥΠΡΟΚΥΠΤΕΙΑΠΟΤΗΧΡΗΣΗΉΤΗΝΑΝΙΚΑΝΟΤΗΤΑΧΡΗΣΗΣΤΟΥΠΡΟΪΟΝΤΟΣΉΤΥΧΟΝΑΛΛΗΣΣΥΝΔΕΣΗΣ
ΜΕΤΟΠΡΟΪΟΝ,ΕΙΤΕΒΑΣΙΖΕΤΑΙΣΕΣΥΜΒΟΛΑΙΟ,ΒΛΑΒΗ,ΑΜΕΛΕΙΑ,ΑΥΣΤΗΡΗΕΥΘΥΝΗΉΕΙΔΑΛΛΩΣ,ΑΚΟΜΗ
ΚΙΕΑΝΗEIZOΉΟΙΔΙΑΝΟΜΕΙΣΕΝΗΜΕΡΩΘΟΥΝΓΙΑΤΗΝΠΙΘΑΝΟΤΗΤΑΤΕΤΟΙΩΝΖΗΜΙΩΝ.ΗΕΞΑΙΡΕΣΗΑΥΤΗ
ΠΕΡΙΛΑΜΒΑΝΕΙ ΕΠΙΣΗΣ ΟΠΟΙΑΔΗΠΟΤΕ ΕΥΘΥΝΗΕΝΔΕΧΕΤΑΙΝΑΠΡΟΚΥΨΕΙΑΠΟΑΞΙΩΣΕΙΣΤΡΙΤΟΥΜΕΡΟΥΣ
ΚΑΤΑΤΟΥΑΡΧΙΚΟΥΑΓΟΡΑΣΤΗ. Η ΟΥΣΙΑΤΟΥΟΡΟΥΑΥΤΟΥΕΙΝΑΙΝΑΠΕΡΙΟΡΙΣΕΙΤΗΝΠΙΘΑΝΗΕΥΘΥΝΗΤΗΣ
EIZOΚΑΙΤΩΝΔΙΑΝΟΜΕΩΝΠΟΥΠΡΟΚΥΠΤΕΙΑΠΟΤΗΝΠΑΡΟΥΣΑΕΓΓΥΗΣΗΉ/ΚΑΙΤΙΣΠΩΛΗΣΕΙΣ.
42
Appendix
ОГРАНИЧЕННАЯ ГАРАНТИЯ
EIZO NANAO CORPORATION (называемая в дальнейшем “EIZO”) и авторизированные EIZO дистрибуторы
(называемые в дальнейшем “Дистрибуторы”) гарантируют, в соответствии с условиями и пунктами этой
ограниченной гарантии (называемой в дальнейшем “Гарантия”), первичному покупателю (называемому в
дальнейшем“Первоначальный покупатель”),которыйприобрелуEIZOилиДистрибуторовпродукт,указанный
в этом документе (называемый в дальнейшем “Продукт”), что EIZO или Дистрибуторы на свое усмотрение
либо бесплатно отремонтируют, либо бесплатно заменят Продукт, если Первоначальный покупатель признает
в пределах Гарантийного срока (определенного ниже), что Продукт неисправен или он поврежден процессе
нормальногоиспользованияпродуктавсоответствиисописаниемвинструкциипоэксплуатации,прилагаемойк
Продукту(называемойвдальнейшем“Руководство пользователя”).
Гарантийныйпериодограниченсрокомдва(2)годаотдатыприобретенияПродукта(называемыйвдальнейшем
“Гарантийный период”). EIZO и Дистрибуторы не несут никакой ответственности и не берут обязательств
относительно Продукта по отношению к Первоначальному покупателю или по отношению к любым третьим
сторонам,кромеобязательств,оговоренныхвэтойГарантии.
EIZOиДистрибуторыпрекратятхранениеилискладированиелюбыхдеталейПродуктапоистечениисеми(7)
летпослепрекращенияпроизводстватакихдеталей.ВслучаеремонтамонитораEIZOиДистрибьюторыбудут
использоватьзапчасти,которыесоответствуютнашимстандартамQC(контролькачества).
Гарантия действительна только в странах или регионах, где расположены Дистрибуторы. Гарантия не
ограничиваетникакиезаконныеправаПервоначальногопокупателя.
НесмотрянадругиеусловияэтойГарантииEIZOиДистрибуторыненесутникакихобязательствсогласноэтой
Гарантиивлюбомизперечисленныхнижеслучаев:
(а) Любые дефекты Продукта, вызванные повреждениями при перевозке, модификацией, изменением,
неправильным обращением, неправильным использованием, авариями, неправильной установкой,
стихийнымибедствиями,неправильнымуходоми/илинеправильнымремонтомтретьейстороной,отличной
отEIZOилиДистрибуторов;
(б) Любые несовместимости Продукта из-за технических усовершенствований и/или изменения технических
норм;
(в) Любоеповреждениедатчика;
(г) Любые ухудшения работы дисплея, вызванные изнашиванием невосстановимых частей, таких как
панельЖКДи/илиподсветкаит.д.(например,изменениевяркости,изменениевравномерностияркости,
изменениевцветности,изменениевравномерностицветности,изменениевпикселах,включаявыгоревшие
пикселыит.д.);
(д) ЛюбыедефектыПродукта,вызванныевнешнимоборудованием;
(е) ЛюбыедефектыПродукта,прикоторыхоригинальныйсерийныйномербылизмененилиудален;
(ж) ЛюбыедефектыПродукта,вызванныепротеканиембатарейки;
(з) Любые естественные ухудшения продукта, в частности, вызванные износом расходных частей,
принадлежностей и/или приспособлений (например, батареек, кнопок, вращающихся частей, пульта
дистанционногоуправления,кабелей,Руководствапользователяит.д.);и
(и) Любые деформации, изменения цвета и/или коробления внешней поверхности продукта, включая
поверхностьпанелиЖКД.
ЧтобыполучитьтехническоеобслуживаниеврамкахГарантии,Первоначальныйпокупательдолжендоставить
ПродуктместномуДистрибутору,оплативперевозку,вегооригинальнойупаковкеиливдругойсоответствующей
упаковке,обеспечивающейравноценнуюстепеньзащиты,принимаявовниманиерискповрежденияи/илиутерю
притранспортировке.ПризапросетехническогообслуживанияврамкахГарантииПервоначальныйпокупатель
долженпредоставитьсвидетельствопокупкипродуктаидатыпокупки.
Гарантийныйпериоддлялюбогозамененногои/илиотремонтированногопродуктаврамкахГарантииистекаетв
концезавершениясрокадействияоригинальногоГарантийногопериода.
EIZO ИЛИ ДИСТРИБУТОРЫ НЕ НЕСУТ ОТВЕТСТВЕННОСТИ ЗА ЛЮБЫЕ ПОВРЕЖДЕНИЯ ИЛИ УТЕРЮ
ДАННЫХИЛИДРУГОЙИНФОРМАЦИИ,ХРАНЯЩИХСЯНАКАКИХ-ЛИБОНОСИТЕЛЯХИНФОРМАЦИИИЛИНА
ЛЮБЫХДРУГИХЧАСТЯХПРОДУКТА,КОТОРЫЙВОЗВРАЩЕНEIZOИЛИДИСТРИБУТОРАМДЛЯРЕМОНТА.
E I Z O  И  Д И СТ Р И БУ ТО Р Ы  Н Е  Д А ЮТ  Н И К А К О Й  Д А Л Ь Н Е Й Ш Е Й  ГА РА Н Т И И ,  В Ы РА Ж Е Н Н О Й  И Л И
ПОДРАЗУМЕВАЕМОЙ, ОТНОСИТЕЛЬНО ПРОДУКТА И ЕГО КАЧЕСТВА, ТЕХНИЧЕСКИХ ХАРАКТЕРИСТИК,
ТОВАРНОСТИ ИЛИ СООТВЕТСТВИЯ ДЛЯ КАКОГО-ЛИБО ОПРЕДЕЛЕННОГО ИСПОЛЬЗОВАНИЯ. НИ ПРИ
КАКИХ УСЛОВИЯХ EIZO ИЛИ ДИСТРИБУТОРЫ НЕ НЕСУТ ОТВЕТСТВЕННОСТИ ЗА ЛЮБОЙ СЛУЧАЙНЫЙ,
КОСВЕННЫЙ,СПЕЦИАЛЬНЫЙ,ПОБОЧНЫЙИЛИИНОЙУЩЕРБ(ВКЛЮЧАЯ,БЕЗОГРАНИЧЕНИЙ,УЩЕРБИЗЗА НЕПОЛУЧЕННОЙ ПРИБЫЛИ, ПРЕРЫВАНИЯ БИЗНЕСА, ПОТЕРИ КОММЕРЧЕСКОЙ ИНФОРМАЦИИ ИЛИ
ЛЮБЫЕ ДРУГИЕ ФИНАНСОВЫЕ ПОТЕРИ), ВОЗНИКШИЙ ИЗ-ЗА ИСПОЛЬЗОВАНИЯ ИЛИ НЕВОЗМОЖНОСТИ
ИСПОЛЬЗОВАТЬ ПРОДУКТ ИЛИ В ЛЮБОЙ ДРУГОЙ СВЯЗИ С ПРОДУКТОМ, ЛИБО ОСНОВАННЫЙ НА
КОНТРАКТНЫХ ОТНОШЕНИЯХ, ГРАЖДАНСКИХ ПРАВОНАРУШЕНИЯХ, НЕБРЕЖНОСТИ, ПРИЧИНЕНИЯ
УЩЕРБА ТРЕТЬЕЙ СТОРОНЕ ИЛИ ЧЕМ-ЛИБО ЕЩЕ, ДАЖЕ ЕСЛИ EIZO ИЛИ ДИСТРИБУТОРЫ БЫЛИ
УВЕДОМЛЕНЫ О ВОЗМОЖНОСТИ ТАКОГО УЩЕРБА. ЭТО ИСКЛЮЧЕНИЕ ТАКЖЕ ВКЛЮЧАЕТ ЛЮБЫЕ
ОБЯЗАТЕЛЬСТВА, КОТОРЫЕ МОГУТ ВОЗНИКНУТЬ В РЕЗУЛЬТАТЕ ТРЕБОВАНИЙ ТРЕТЬЕЙ СТОРОНЫ
В ОТНОШЕНИИ ПЕРВОНАЧАЛЬНОГО ПОКУПАТЕЛЯ. СУЩЕСТВОМ ЭТОГО ПОЛОЖЕНИЯ ЯВЛЯЕТСЯ
ОГРАНИЧЕНИЕ ПОТЕНЦИАЛЬНОЙ ОТВЕТСТВЕННОСТИ EIZO И ДИСТРИБУТОРОВ, ВОЗНИКАЮЩЕЙ ИЗ-ЗА
ЭТОЙОГРАНИЧЕННОЙГАРАНТИИИ/ИЛИПРОДАЖ.
Appendix
43
有限责任保证书
EIZONANAO 有限公司(以下简称 EIZO )和 EIZO 授权的经销商(以下简称 经销商 ),接受并依照本有限责任保证书
(以下简称 保证书 )之条款,向从 EIZO 和经销商购买本文中所规定产品(以下简称 产品 )的原买方(以下称 原买
方 )提供保证 :在保证期内(规定如下),如果原买方发现按本产品所附使用说明书(以下简称 用户手册 )所述方式正
常使用本产品过程中,本产品出现故障或损坏,EIZO 和经销商根据其独自的判断免费修理或更换该产品。
本保证期限定为本产品自购买本产品之日起的二(2)年(以下简称 保证期限 )。EIZO 和经销商将不向原买方或任何第
三方承担本保证书所规定之外的与本产品有关任何责任或义务。
本产品的任何部件停产七(7)年后,EIZO 和经销商将不再保留或保管任何这类部件。维修显示器时,EIZO 与经销商将
使用符合我方质量控制标准的替换零件。
本保证书仅对于设有经销商的国家或地区有效。本保证书并不限定原买方的任何法律权利。
无论本保证书的任何其他条款如何规定,对于任何下列情况之一,EIZO 和经销商将不承担本保证书规定责任 :
(a) 由于运输损害、改装、改动、滥用、误用、意外事故、错误安装、灾害、维护不善和 / 或由除 EIZO 和经销商以外的
第三方进行不适当的修理造成本产品的任何故障。
(b) 由于可能发生的技术变更和 / 或调整造成本产品的任何不兼容性。
(c) 传感器的任何劣化。
(d) 由于诸如液晶显示屏(LCD)和 / 或背灯等消耗品部件的老化造成的任何显示性能低劣(如亮度变化、亮度均一性变化、
色彩变化、色彩均一性变化、如烧伤像素等像素缺陷)。
(e) 因外部设备造成本产品的任何故障。
(f) 因本产品的原序号被改变或消除造成本产品的任何故障。
(g) 因电池液体泄漏造成本产品的任何故障。
(h) 本产品的任何正常老化,尤其是消耗品、附件和 / 或附加装置(如电池、按钮、旋转部件、遥控器、电缆、用户手册等)、
以及
(i) 本产品表面包括液晶显示屏(LCD)表面的任何变形、变色和 / 翘曲。
为了获得本保证书规定的服务,原买方必须使用原包装或其他具有同等保护程度的适当包装将本产品运送到当地的经销商,
并且预付运费,承担运输中的损坏和 / 或损失的风险。要求提供本保证书规定的服务时,原买方必须提交购买本产品和标
明此购买日期的证明。
按本保证书规定进行了更换和 / 或修理的任何产品的保证期限,将在原保证期限结束时终止。
在返回给 EIZO 和经销商进行修理后,任何产品的任何媒体或任何部件中储存的数据或其他信息发生任何损坏或损失,对
此 EIZO 和经销商将不承担责任。
对于本产品及其质量、性能、可销售性以及对于特殊用途的适合性,EIZO 和经销商不提供其他任何明示或暗示的保证。因
使用本产品或无法使用本产品或因与本产品有任何关系(无论是否根据合同)而造成 : 任何附带的、间接的、特殊的、随
之发生的或其他的损害(包括但不仅限于:利润损失、业务中断、业务信息丢失或其他任何金钱损失)以及侵权行为、过失、
严格赔偿责任或其他责任,即使已经向 EIZO 和经销商提出了发生这些损害的可能性,对此 EIZO 和经销商概不承担责任。
本免责条款还包括因第三方向原买方提出索赔而可能发生的任何责任。 本条款的本质是限定由于本有限责任保证书和 / 或
销售本产品所发生的 EIZO 和经销商的潜在责任。
44
Appendix
China Measures for RoHS Compliance in ChinaRoHS
关于电子信息产品污染控制标识
本标识根据「电子信息产品污染控制管理办法」,适用于在中华人民共和国销售的电子信息产品。标识中央的
数字为环保使用期限的年数。只要您遵守该产品相关的安全及使用注意事项,在自制造日起算的年限内,不会
产生对环境污染或人体及财产的影响。上述标识粘贴在机器背面。
• 有毒有害物质或元素的名称及含量
部件名称
有毒有害物质或元素
铅
汞
镉
六价铬
多溴联苯
多溴二苯醚
(Pb)
(Hg)
(Cd)
(Cr(VI))
(PBB)
(PBDE)
印刷电路板
×
○
○
○
○
○
机箱
○
○
○
○
○
○
液晶显示器
×
○
○
○
○
○
其他
×
○
○
○
○
○
○ :表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T 11363-2006 规定的限量要求以下。
× :表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T 11363-2006 规定的限量要求。
( 企业可在此处 , 根据实际情況对上表中打“×” 的技术原因进行进一步说明 )
Appendix
45
2nd Edition-November, 2011
03V23565B1
(U.M-FDX1501-CP)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising