SuitCase® 12RC - Miller Welding

SuitCase® 12RC - Miller Welding
Issued Jan. 2017 • Index No. WFM/60.0 UK
SuitCase 12RC
®
Quick
Specs
Wire Feeder with
Remote Control
Industrial Applications
Processes
Input Power 24 VAC, 10 A
Shipbuilding
Construction
Heavy manufacturing
Rental
MIG (GMAW)
Flux-cored (FCAW)
Pulsed MIG (GMAW-P)
Wire Feed Speed 1.3–17.8 mpm (50–700 ipm)
Wire Diameter Capacity 0.6–2.0 mm (.023–5/64 in.)
Net Weight 14.1 kg (31 lb.)
Portable wire feeding with standard remote voltage control.
Requires control cable — sold separately.
Scaled wire pressure knob
provides easy adjustment
and consistent pressure
on the drive rolls and wire.
Gun locking tab works
with guns having
corresponding locking
grooves to prevent gun
from being pulled out
if the feeder is dragged
by the gun.
Ultra-low drag inlet guide
pins make loading the
wire easy and does not
deform the wire on the
way into the drive rolls.
Ergonomically sound, lightweight, modular
design is well balanced, and allows improved
mobility and ease of carrying to remote
welding sites.
Totally enclosed, impact-resistant, flameretardant case provides strength and
durability, and protects components and
welding wire from moisture, dust and other
contaminants.
Polypropylene case with built-in slide rails
and the ability to open the door to change wire
with feeder in vertical position.
Digital meters with SunVision™ technology
can display voltage or wire speed, and also
amperage if desired. Meters can be seen
clearly even in direct sunlight.
Drive roll accessibility makes it easy to install
wire, adjust tension and change drive rolls.
Gas inlet recessed into back of case is
protected from incidental contact by the weld
cable, ensuring consistent and contaminantfree shielding gas delivery to the gun.
Double-filtered gas valve helps keep dirt from
clogging and affecting gas flow.
Wire feeder is warranted for three years, parts and labour.
ITW Welding – BV
ITW Welding – Italy S.r.l.
Edisonstraat 10
P.O. Box 1551
NL-3261 LD Oud-Beijerland,
Netherlands
TEL: +31 (0) 186 641 444
FAX: +31 (0) 186 640 880
Via Privata Iseo 6/e
20098 San Guiliano M.se
Milano – Italia
TEL.: +39 02 982901
FAX: +39 02 98281552
ITW-Welding.com
International Headquarters
Miller Electric Mfg. Co.
An Illinois Tool Works Company
1635 W. Spencer Street
Appleton, WI 54914 USA
TEL. : +1 920 735 4554
FAX : +1 920 735 4125
MillerWelds.com
Specifications (Subject to change without notice.)
Input
Power
Input Welding
Circuit Rating
IP
Rating
24 VAC,
10 A,
50/60 Hz
425 A at
60% duty cycle
IP23
(Use with CV, DC
Power Sources.)
Wire Feed Speed
Wire Type and Diameter Capacity
Max. Spool
Size Capacity
1.3–17.8 mpm
(50–700 ipm)
Solid wire: 0.6–1.4 mm (.023–.052 in.)
Flux-cored: 0.8–2.0 mm (.030–5/64 in.)
305 mm (12 in.),
20 kg (45 lb.)
Net
Weight
Dimensions
H: 394 mm (15.5 in.)
W: 229 mm (9 in.)
D: 533 mm (21 in.)
14.1 kg
(31 lb.)
All CE models conform to the applicable parts of the IEC 60974 series of standards.
Drive Rolls (Two Required.)
Select drive rolls from chart below according to type and wire size being used. Wire inlet guide comes installed on this wire feeder.
Wire Size
0.8 mm (.030 in.)
1.0 mm (.040 in.)
1.1/1.2 mm (.045 in.)
1.3/1.4 mm (.052 in.)
1.6 mm (1/16 in.)
1.8 mm (.068/.072 in.)
2.0 mm (5/64 in.)
“U” groove for
soft wire or
soft-shelled
cored wires
“V” groove
for hard wire
053695
053696
053697
053698
053699
—
—
“U” cogged
for extremely soft
wire or soft-shelled
cored wires (i.e.,
hard facing types)
“V” knurled for
hard-shelled
cored wires
—
—
053701
053702
053706
—
053704
—
—
132957
132956
132955
132959
132960
—
—
083489
083490
053708
—
053710
Ordering Information
Equipment and Options
Stock No.
Description
SuitCase 12RC
301121
301121E
301121RB
301121RBE
301121W
301121WE
With Euro gun connection
With run-in and burnback
With run-in, burnback and Euro gun connection
With water fittings
With water fittings and Euro gun connection
300343
195189
047141
For 6.4 kg (14 lb.) spools
242208025
242208050
242208080
242208025RCA
242208050RCA
242208080RCA
242208025RCW
242208050RCW
242208080RCW
300583
7.6 m (25 ft.)
15.2 m (50 ft.)
24.3 m (80 ft.)
7.6 m (25 ft.), 70 mmq weld cable, control cable, gas hose
15.2 m (50 ft.), 70 mmq weld cable, control cable, gas hose
24.3 m (80 ft.), 70 mmq weld cable, control cable, gas hose
7.6 m (25 ft.), 70 mmq weld cable, control cable, gas and water hose
15.2 m (50 ft.), 70 mmq weld cable, control cable, gas and water hose
24.3 m (80 ft.), 70 mmq weld cable, control cable, gas and water hose
Used for suspending feeder over work area
®
Flowmeter Kit
Inline Filter
Spool Adapter
Accessories
Control Cables
Air-Cooled Interconnecting Cables
Water-Cooled Interconnecting Cables
Lift Eye
Qty.
Guns
Bernard™ Dura-Flux™ (FCAW)
Bernard™ BTB Gun 300 A (GMAW)
See Bernard literature SP-DF. Contact ITW Welding
See Bernard literature SP-BTB. Contact ITW Welding
Power Sources
XMT® Series
Dimension™ Series
Big Blue® 400 Pro
Big Blue® 500 Pro
See literature DCM/43.0 and DC/18.94
See literature DC/19.2
See literature ED/5.7
See literature ED/11.0
Date:
Distributed by:
© 2017 Miller Electric Mfg. Co.
Total Quoted Price:
Price
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement