`NAME OF PARTS AND THEIR FUNCTIONS

`NAME OF PARTS AND THEIR FUNCTIONS
‘NAME OF PARTS AND THEIR FUNCTIONS
Front panel
D ® © D
= Г] > в (155 D
с) MODE Ada E a / |9, re a Le CD
(1) POWER SWITCH: (3) GRAPHICS INDICATOR LIGHT:
Press this switch to rn on or off the power Light will turn on to indicate the CO +Graphics Disc is
playing and dacoding.
(2) POWER INDICATOR LIGHT:
SOURCE SELECTOR; INDICATORS:
Press the selector [DYD, CO, LD) to select the Input source
wold wish 10 play.
Back panel
De Ea o
| |
= | — = . + — - —- = — |
Cy me E El a es a TE = E
>| =— ee L a el | a $ IEA |)
|
®
(1) DC INPUT JACK:
(4) DIGITAL INPUT JACKS:
Plug the 8% ACIDC adaptor into this jack 10 get power.
Connect the digital input jacks to the digital output jacks of
the (WD players, CD players, or LO playcrs.
Note: Only use the adaplor supphcd. Using lalse never
adaptors may damage the decoder. Note The DvD players, CD players, and LD players must
have either coaxial or optical digital output to connect to fo
PALS NTSC SWITCH: | Ш
Use this to switch me select havween different telavision
Systems,
For US. TY. systems, sel to NTSC.
For European TW. systems, seb lo PAL.
(3) VIDEO OUTPUT JACKS:
Connect video output jacks from the decoder to the video
input jack of TV. monitor {up to 3 TY. monitora)
decoder.
COAXIAL! OPTICAL SWITCH:
Use {his switch to select between coaxial digital input or
optical ciqital input corresponding to the different digital
output system (coaxial or optical} of the DVD players, CL
pavers or LLL? players yoU wish ta play.
CONNECTIONS:
E
обо бесов Ве
a . "E я
“held
pm a
(OPTICAL OF COAXIAL in}
(DC ADAPTER | (OPTICA! 09
| COAXIAL OUT)
a S
- Se
Pa
{OPTICAL OR COAXIAL OUT)
{OPTICAL OF LO PLAYER
Y COAXIAL OUT]
A use : = —_ г. cn
DVD PLAYER =————
210
CIRIO
ОС
я E F
CD PLAYER
TROUBLESHOOTING:
SYMPTOM(S) POSSIBLE CAUSE(S) SOLUTION
1. No power. * DC input is unplugged * Connect the 9V DC adaptor
supplied into the DC input jack.
Note: Use only the adaptor sup-
plied. Using a false power adaptor
may damage the decoder.
2. No graphics. * Input selector is switched after the * Select the proper input and resta
song has been played. the song. ;
* A non CD+G disc is being played. * Check and make sure inserted disc
is a CD+G disc. The graphics indi-
cator light should turn on to show
the disc is playing and decoding.
* Input selector is not switched to the * Switch to the proper input from the
player. source selector and restart the
song.
* Coaxial/optical switch 1s not properly * Check and set the coaxial/ optical
selected. switch to the correct position.
* Video output is not properly connect- * Connect the video output to the
ed. video input of the TV monitor.
Note: 1. The TV monitor must be
switched to the correct video
input. Please, refer to your TV
owner's manual for correct video
input switching.
2. Some TVs may not have
audio / video inputs. In this case, a
RF Modulator (not included) will be
required.
3. Graphics are black and white or * Video systems (PAL/ NTSC) not prop- * Switch to the proper video system:
scribbles. erly switched. NTSC for U.S. T.V. systems.
PAL for European T.V. systems.
* The CD+G Disc is dirty or scratched. * Clean the disc and check for any
| scratches.
228277 77
OWNER'S MANUAL
с Ш o o [556 3
> LU 577777740 ai (oa ec] alo
DECOD-G1
CD + GRAPHICS DECODER
EXCELLENT FEATURES:
- 19" RACK MOUNTABLE CD+GRAPHICS DECODER
- TURN CD PLAYERS, DVD PLAYERS, LASER DISC PLAYERS INTO CDG PLAYER
(MUST HAVE DIGITAL OUTPUTS)
- ACCEPT UP TO 3 DIGITAL SOURCES SUCH AS DVD PLAYER, CD PLAYER OR LD
PLAYERS
- SWITCHABLE OPTICAL OR COAXIAL INPUTS
- DECODES AND OUTPUTS THE GRAPHICS WITH ANY CD+GRAPHIC DISCS
- CONNECT UP TO 3 TV MONITORS WITH 3 RCA VIDEO QUTPUT JACKS
- SWITCHABLE PAL / NTSC FOR BOTH U.S. AND EUROPEAN TV SYSTEMS
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK) NO USER-SERVICABLE
PARTS INSIDE REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL
7
!
WARNING
The lightning flash with arrowhead symbol, within an equi-
lateral triangle, is intended to alert the usar to the presance
of uninsulated “dangerous voltage” within the products
enclosure that may be of sufficient magnitude to constitute
a risk of electric shock to persons,
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance Iservicing) instructions in the
literature accompanying the appliance.
TC REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO BAIN OR MOISTURE.
CAUTION:
TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS {POLAR-
IZED) PLUG WITH AN EXTENSION CORD. RECEPTACLE OR
OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERT-
ED TO PREVENT BLADE EXPOSURE.
— TABLE OF CONTENTS
NAME OF PARTS AND THEIR FUNCTION civ. 3
CONNECTION suena NE као Е собовя . 4
TROUBLE SHO NN een otre D ENS ‚ 5
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement