hp psc 13 00 series all-in-one

hp psc 13 00 series all-in-one
c o pi e r
*Q3500-90196*
*Q3500-90196*
Windows 98,
2000, ME, XP
www.hp.com/support Copyright Hewlett-Packard Company 2003
hp psc 1300 series all-in-one
hp psc110
0
p r i nt e r s
c a n n er
Q3500-90196
11
12
8
9
10
5
6
7
1
2
3
4
1
Macintosh users
START HERE
2
Unpack the device
3
a
Attach the front panel cover
4
Remove the adhesive backing from the front panel cover.
b Raise the lid of the HP PSC. Place the front panel cover into the recess and
stick it into place.
Macintosh
a
Load plain white paper
a
b
b
Q3500-90196
*Q3500-90196*
*Q3500-90196*
The HP PSC will not work until you attach the front panel cover!
Macintosh OS 9, OS X
5
This side of the poster is for
Macintosh users only.
Connect the USB cable
6
Connect the power cords
c
If you have an iMac, the USB port is on the side.
Do not connect the HP PSC to a USB port on a
keyboard or a non-powered USB hub. See the
Reference Guide for more details.
Follow the steps on this poster in
order.
a
hp psc 1300 series all-in-one
Press the On/Resume
button to turn on the
HP PSC. Wait for it to
finish initializing.
b
Insert and align the print cartridges
hp psc110
0
p r i nt e r s
c a n n er
Tri-color
c o pi e r
Black
a
b
c
d
e
f
Lower the print-carriage
access door. The print
carriage slides to the
middle.
Remove the bright pink tape from
the print cartridges. Do not touch
the gold-colored contacts or retape
the cartridges.
Hold the black print cartridge with the large HP label and the raised
markings on top. Slide the cartridge at a slight angle into the right
side of the print carriage.
Hold the color print cartridge with the large HP label and the raised
markings on top. Slide the cartridge at a slight angle into the left side of
the print carriage.
Close the print-carriage access door. Within a few minutes, a print
cartridge alignment page prints.
Press the Scan button.
Press firmly until the print cartridge snaps into place.
Press firmly until the print cartridge snaps into place.
Place the top of the alignment page face down on the front left corner
of the glass. Close the lid.
After the On light stops blinking,
alignment is complete. Discard or
recycle the alignment page.
Make sure that both print cartridges are secure.
9
a
Install the software
Turn on your Macintosh and wait
for it to finish starting up.
Insert the Macintosh HP PSC CD.
10
b
c
Double-click the
HP All-In-One
Installer icon on
the desktop.
hp_all-in-one_installer
Macintosh OS 9, OS X
Macintosh setup poster
8
7
Turn on the HP PSC
Follow the onscreen instructions.
You may have to restart your
Macintosh during setup. Be sure to
complete the setup assistant.
Try the HP PSC
Congratulations! You are now ready to use your HP
PSC. Select the HP Director icon in the dock to get
started.
If you encounter problems during setup, see the
Reference Guide.
www.hp.com/support
Copyright Hewlett-Packard Company 2003
Printed in Germany
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement