Junos Pulse Client Error Messages

Junos Pulse Client Error Messages
Junos Pulse
Client Error Messages
Release 5.0
Juniper Networks, Inc.
1194 North Mathilda Avenue
Sunnyvale, CA 94089 USA
408 745 2000 or 888 JUNIPER
www.juniper.net
December 2013
Junos Pulse Client Error Messages
Juniper Networks, Junos, Steel-Belted Radius, NetScreen, and ScreenOS are registered
trademarks of Juniper Networks, Inc. in the United States and other countries. The Juniper
Networks Logo, the Junos logo, and JunosE are trademarks of Juniper Networks, Inc. All
other trademarks, service marks, registered trademarks, or registered service marks are
the property of their respective owners. Juniper Networks assumes no responsibility for any
inaccuracies in this document. Juniper Networks reserves the right to change, modify,
transfer, or otherwise revise this publication without notice. Products made or sold by
Juniper Networks or components thereof might be covered by one or more of the following
patents that are owned by or licensed to Juniper Networks: U.S. Patent Nos. 5,473,599,
5,905,725, 5,909,440, 6,192,051, 6,333,650, 6,359,479, 6,406,312, 6,429,706, 6,459,579,
6,493,347, 6,538,518, 6,538,899, 6,552,918, 6,567,902, 6,578,186, and 6,590,785.
Copyright © 2013, Juniper Networks, Inc. All rights reserved.
2
Contents
Overview ...............................................................................................4
Junos Pulse Client Error Messages ..............................................4
Junos Pulse Client Error Messages
Overview
This document lists all of the Pulse client error messages.
You can customize these messages by using the Junos Pulse Branding
Tool, BrandPackager, which is available on the Pulse software downloads
page of juniper.net.
J unos P uls e C lient E rror Mes s ages
; kMsg8021xAMErrNoWindowsProfile
[1500]
Short-desc = No Windows WLAN profile
Long-desc = Verify your wireless network configuration and then try the
operation again.
; kMsg8021xAMErrNoSSID
[1501]
Short-desc = No SSID(s) in range for connection request.
Long-desc = Verify your wireless network configuration and SSID signal
strength and then try the operation again.
; kMsg8021xAMErrIVEFailed
[1502]
Short-desc = IVE connection failed
Long-desc = Manually restart your connection.
; kMsg8021xAMErrReconnectFailed
[1503]
Short-desc = Windows didn't respond to reconnection request.
Long-desc = Possible cause may be the network cable is unplugged or
plugged into a non 8021.x port (on the switch). Please fix the possible
cause and manually restart your connection.
; kMsg8021xAMErrWirelessFailed
[1504]
Short-desc = Wireless 802.1x network request failed
Long-desc = Manually restart your connection.
; kMsg8021xAMErrTerminated
[1505]
Short-desc = Authentication unexpectedly terminated by Windows 802.1x
supplicant.
4
Junos Pulse Client Error Messages
Long-desc = If Windows doesn't retry automatically, then manually restart
your connection.
; kMsg8021xAMErrWirelessSuppression
[1506]
Short-desc = 802.1x wireless networks are being suppressed.
Long-desc = Wireless suppression has been enabled by administrator.
The 802.1x wireless networks are suppressed when a valid wired network
is detected.
; JUNS catalogUtil requires catalog message files to be saved with UTF-8
encoding, which put 3 bytes {0xEF, 0xBB, 0xBF} at the file beginning
called Byte Order Mark (BOM) for UTF-8 files . For modifications in this
files, please use Text Editors which persist these BOM bytes (like
Notepad.exe, Visual Studio IDE, etc).
;kMsgConnMgrErrConnectionMethodFailure
[1800]
Short-desc = Failed to invoke connection method.
Long-desc = Retry the operation. If the problem persists, re-install
application or contact your network administrator.
;kMsgConnMgrErrConnectionDoesNotExist
[1801]
Short-desc = Connection does not exist
Long-desc = A connection attempt was made on a connection which does
not exist, try deleting and re-adding the connection.
;kMsgConnMgrErrConnectionDoesAlreadyExists
[1802]
Short-desc = Connection already exists
Long-desc = A connection attempt was made to a connection which
already exists, try disconnecting and re-connecting the connection.
;kMsgConnMgrErrConnMethodTerminated
[1803]
Short-desc = Connection method stopped unexpectedly
Long-desc = Connection method {0} stopped unexpectedly with error {1},
try re-starting your application.
;kMsgConnMgrErrConnMethodTooMany
[1804]
Short-desc = Connection method doesn't allow concurrent connections
Long-desc = The connection failed because there is already a connection
of that type connected, and the connection method doesn't allow
concurrent connections.
5
Junos Pulse Client Error Messages
; JUNS catalogUtil requires catalog message files to be saved with UTF-8
encoding, which put 3 bytes {0xEF, 0xBB, 0xBF} at the file beginning
called Byte Order Mark (BOM) for UTF-8 files . For modifications in this
files, please use Text Editors which persist these BOM bytes (like
Notepad.exe, Visual Studio IDE, etc).
; kMsgEapAMErrGeneralFailure
[1300]
Short-desc = General failure.
Long-desc = Try the operation again. If the problem persists, contact your
network administrator.
; kMsgEapAMErrTimeout
[1301]
Short-desc = Timeout.
Long-desc = The operation exceeded the time limit. Try the operation
again.
; kMsgEapAMErrIncomplete
[1302]
Short-desc = Authentication not completed.
Long-desc = Try the operation again. If the problem persists, contact your
network administrator.
; kMsgEapAMErrParseFailure
[1303]
Short-desc = Error in format of received messages.
Long-desc = Try the operation again. If the problem persists, contact your
network administrator.
; kMsgEapAMErrNoCredentials
[1304]
Short-desc = Client credentials were not available.
Long-desc = Try the operation again. If the problem persists, contact your
network administrator.
; kMsgEapAMErrInternalFailure
[1305]
Short-desc = Unknown error.
Long-desc = Try the operation again. If the problem persists, contact your
network administrator.
; kMsgEapAMErrProtocolFailure
[1306]
6
Junos Pulse Client Error Messages
Short-desc = Protocol error in received messages.
Long-desc = Try the operation again. If the problem persists, contact your
network administrator.
; kMsgEapAMErrClientReject
[1307]
Short-desc = Server not authenticated.
Long-desc = Try the operation again. If the problem persists, contact your
network administrator.
; kMsgEapAMErrServerReject
[1308]
Short-desc = Authentication rejected by server.
Long-desc = Try the operation again. If the problem persists, contact your
network administrator.
; kMsgEapAMErrAuthenticationFailure
[1309]
Short-desc = Authentication failure.
Long-desc = Try the operation again. If the problem persists, contact your
network administrator.
; kMsgEapAMErrTlsHandshakeFailrure
[1310]
Short-desc = TLS handshake failure.
Long-desc = Try the operation again. If the problem persists, contact your
network administrator.
; kMsgEapAMErrNoUserCertificate
[1311]
Short-desc = User certificate not available
Long-desc = Try the operation again. If the problem persists, contact your
network administrator.
; kMsgEapAMErrNoAgreedMethod
[1312]
Short-desc = Client and server could not agree on authentication method.
Long-desc = Try the operation again. If the problem persists, contact your
network administrator.
; kMsgEapAMErrErrorChangingPassword
[1313]
Short-desc = Error changing password.
7
Junos Pulse Client Error Messages
Long-desc = The authentication server might not be currently available.
Try the operation at a later time. If the problem persists, contact your
network administrator.
; kMsgEapAMErrRestrictedLogonHours
[1314]
Short-desc = Restricted logon hours.
Long-desc = Your logon credentials are valid only during certain hours.
; kMsgEapAMErrNoPermission
[1315]
Short-desc = No permission.
Long-desc = You do not have permission to perform the operation.
; kMsgEapAMErrAcctDisabled
[1316]
Short-desc = Account disabled
Long-desc = Your account has been disabled. Contact your network
administrator.
; kMsgEapAMErrPasswordExpired
[1317]
Short-desc = Password expired.
Long-desc = You must change your password before you can login.
; kMsgEapAMErrUnknown
[1318]
Short-desc = Unknown error.
Long-desc = Try the operation again. If the problem persists, contact your
network administrator.
; kMsgEapAMErrJuacAuthFailed
[1319]
Short-desc = Authentication rejected by server.
Long-desc = Try the operation again. If the problem persists, contact your
network administrator.
; kMsgEapAMErrJuacInvalidRealm
[1320]
Short-desc = Invalid Realm.
Long-desc = The realm is no longer available. If you use saved
credentials to log in to the system, use the Forget Saved Settings feature
and then try logging in again.
8
Junos Pulse Client Error Messages
; kMsgEapAMErrJuacVersionUnsupported
[1321]
Short-desc = Version unsupported.
Long-desc = Try the operation again. If the problem persists, contact your
network administrator.
; kMsgEapAMErrJuacMaxSessions
[1322]
Short-desc = Too many users for this realm.
Long-desc = The selected realm is already serving the maximum number
of users.
; kMsgEapAMErrJuacAdminsOnly
[1323]
Short-desc = Only administrators can sign on.
Long-desc = The realm is currently restricted to administrator access.
; kMsgEapAMErrJuacTooMany
[1324]
Short-desc = Too many concurrent users.
Long-desc = Try the operation again at a later time.
; kMsgEapAMErrJuacIpDenied
[1325]
Short-desc = Logins disabled from this IP address.
Long-desc = The server has associated your login information with a
specific IP address and the IP address for this login attempt does not
match configured settings..
; kMsgEapAMErrJuacOtherFailure
[1326]
Short-desc = Other JUAC failure.
Long-desc = Try the operation again. If the problem persists, contact your
network administrator.
; kMsgEapAMErrJuacAccountDisabled
[1327]
Short-desc = Account has been disabled.
Long-desc = Contact your network administrator.
; kMsgEapAMErrJuacAccountExired
[1328]
Short-desc = Account has expired.
9
Junos Pulse Client Error Messages
Long-desc = Contact your network administrator.
; kMsgEapAMErrJuacNoRoles
[1329]
Short-desc = You are not allowed to sign in.
Long-desc = Contact your network administrator.
; kMsgEapAMErrJuacIpBlocked
[1330]
Short-desc = Logins temporarily disabled from this computer
Long-desc = Try the operation again at a later time.
; kMsgEapAMErrJuacUnknown
[1331]
Short-desc = Authentication rejected by server.
Long-desc = Try the operation again. If the problem persists, contact your
network administrator.
; kMsgEapAMErrJuacWrongCertificate
[1332]
Short-desc = Missing or invalid client certificate
Long-desc = Contact your network administrator.
; kMsgEapAMErrJuacAccountLockedOut
[1333]
Short-desc = Account locked out
Long-desc = Contact your network administrator.
; kMsgEapAMErrTlsClientAlert_0
[1334]
Short-desc = Client issued alert close notify.
Long-desc = Try the operation again. If the problem persists, contact your
network administrator.
; kMsgEapAMErrTlsClientAlert_10
[1335]
Short-desc = Client issued alert unexpected message.
Long-desc = Try the operation again. If the problem persists, contact your
network administrator.
; kMsgEapAMErrTlsClientAlert_20
[1336]
10
Junos Pulse Client Error Messages
Short-desc = Client issued alert bad record mac.
Long-desc = Try the operation again. If the problem persists, contact your
network administrator.
; kMsgEapAMErrTlsClientAlert_21
[1337]
Short-desc = Client issued alert decryption failed.
Long-desc = Try the operation again. If the problem persists, contact your
network administrator.
; kMsgEapAMErrTlsClientAlert_22
[1338]
Short-desc = Client issued alert record overflow.
Long-desc = Try the operation again. If the problem persists, contact your
network administrator.
; kMsgEapAMErrTlsClientAlert_30
[1339]
Short-desc = Client issued alert decompression failure.
Long-desc = Try the operation again. If the problem persists, contact your
network administrator.
; kMsgEapAMErrTlsClientAlert_40
[1340]
Short-desc = Client issued alert handshake failure.
Long-desc = Try the operation again. If the problem persists, contact your
network administrator.
; kMsgEapAMErrTlsClientAlert_42
[1341]
Short-desc = Client issued alert bad certificate.
Long-desc = Contact your network administrator.
; kMsgEapAMErrTlsClientAlert_43
[1342]
Short-desc = Client issued alert unsupported certificate.
Long-desc = Contact your network administrator.
; kMsgEapAMErrTlsClientAlert_44
[1343]
Short-desc = Client issued alert certificate revoked.
Long-desc = Contact your network administrator.
11
Junos Pulse Client Error Messages
; kMsgEapAMErrTlsClientAlert_45
[1344]
Short-desc = Client issued alert certificate expired.
Long-desc = Contact your network administrator.
; kMsgEapAMErrTlsClientAlert_46
[1345]
Short-desc = Client issued alert certificate unknown.
Long-desc = Contact your network administrator.
; kMsgEapAMErrTlsClientAlert_47
[1346]
Short-desc = Client issued alert illegal parameter.
Long-desc = Try the operation again. If the problem persists, contact your
network administrator.
; kMsgEapAMErrTlsClientAlert_48
[1347]
Short-desc = Client issued alert unknown certificate authority.
Long-desc = Contact your network administrator.
; kMsgEapAMErrTlsClientAlert_49
[1348]
Short-desc = Client issued alert access denied.
Long-desc = Try the operation again. If the problem persists, contact your
network administrator.
; kMsgEapAMErrTlsClientAlert_50
[1349]
Short-desc = Client issued alert decode error.
Long-desc = Try the operation again. If the problem persists, contact your
network administrator.
; kMsgEapAMErrTlsClientAlert_51
[1350]
Short-desc = Client issued alert decrypt error.
Long-desc = Try the operation again. If the problem persists, contact your
network administrator.
; kMsgEapAMErrTlsClientAlert_60
[1351]
Short-desc = Client issued alert export restriction.
Long-desc = Contact your network administrator.
12
Junos Pulse Client Error Messages
; kMsgEapAMErrTlsClientAlert_70
[1352]
Short-desc = Client issued alert protocol version.
Long-desc = Contact your network administrator.
; kMsgEapAMErrTlsClientAlert_71
[1353]
Short-desc = Client issued alert insufficient security.
Long-desc = Contact your network administrator.
; kMsgEapAMErrTlsClientAlert_80
[1354]
Short-desc = Client issued alert internal error.
Long-desc = Try the operation again. If the problem persists, contact your
network administrator.
; kMsgEapAMErrTlsClientAlert_90
[1355]
Short-desc = Client issued alert user canceled.
Long-desc = Try the operation again. If the problem persists, contact your
network administrator.
; kMsgEapAMErrTlsClientAlert_100
[1356]
Short-desc = Client issued alert no renegotiation.
Long-desc = Try the operation again. If the problem persists, contact your
network administrator.
; kMsgEapAMErrTlsServerAlert_0
[1357]
Short-desc = Server issued alert close notify.
Long-desc = Try the operation again. If the problem persists, contact your
network administrator.
; kMsgEapAMErrTlsServerAlert_10
[1358]
Short-desc = Server issued alert unexpected message.
Long-desc = Try the operation again. If the problem persists, contact your
network administrator.
13
Junos Pulse Client Error Messages
; kMsgEapAMErrTlsServerAlert_20
[1359]
Short-desc = Server issued alert bad record mac.
Long-desc = Try the operation again. If the problem persists, contact your
network administrator.
; kMsgEapAMErrTlsServerAlert_21
[1360]
Short-desc = Server issued alert decryption failed.
Long-desc = Try the operation again. If the problem persists, contact your
network administrator.
; kMsgEapAMErrTlsServerAlert_22
[1361]
Short-desc = Server issued alert record overflow.
Long-desc = Try the operation again. If the problem persists, contact your
network administrator.
; kMsgEapAMErrTlsServerAlert_30
[1362]
Short-desc = Server issued alert decompression failure.
Long-desc = Try the operation again. If the problem persists, contact your
network administrator.
; kMsgEapAMErrTlsServerAlert_40
[1363]
Short-desc = Server issued alert handshake failure.
Long-desc = Try the operation again. If the problem persists, contact your
network administrator.
; kMsgEapAMErrTlsServerAlert_42
[1364]
Short-desc = Server issued alert bad certificate.
Long-desc = Try the operation again with a valid client certificate. If the
problem persists, contact your network administrator.
; kMsgEapAMErrTlsServerAlert_43
[1365]
Short-desc = Server issued alert unsupported certificate.
Long-desc = Try the operation again with a valid client certificate. If the
problem persists, contact your network administrator.
; kMsgEapAMErrTlsServerAlert_44
[1366]
14
Junos Pulse Client Error Messages
Short-desc = Server issued alert certificate revoked.
Long-desc = Try the operation again with a valid client certificate. If the
problem persists, contact your network administrator.
; kMsgEapAMErrTlsServerAlert_45
[1367]
Short-desc = Server issued alert certificate expired.
Long-desc = Try the operation again with a valid client certificate. If the
problem persists, contact your network administrator.
; kMsgEapAMErrTlsServerAlert_46
[1368]
Short-desc = Server issued alert certificate unknown.
Long-desc = Try the operation again with a valid client certificate. If the
problem persists, contact your network administrator.
; kMsgEapAMErrTlsServerAlert_47
[1369]
Short-desc = Server issued alert illegal parameter.
Long-desc = Try the operation again. If the problem persists, contact your
network administrator.
; kMsgEapAMErrTlsServerAlert_48
[1370]
Short-desc = Server issued alert unknown certificate authority.
Long-desc = Try the operation again with a valid client certificate whose
CA is trusted by the server. If the problem persists, contact your network
administrator.
; kMsgEapAMErrTlsServerAlert_49
[1371]
Short-desc = Server issued alert access denied.
Long-desc = Try the operation again. If the problem persists, contact your
network administrator.
; kMsgEapAMErrTlsServerAlert_50
[1372]
Short-desc = Server issued alert decode error.
Long-desc = Try the operation again. If the problem persists, contact your
network administrator.
; kMsgEapAMErrTlsServerAlert_51
[1373]
Short-desc = Server issued alert decrypt error.
15
Junos Pulse Client Error Messages
Long-desc = Try the operation again. If the problem persists, contact your
network administrator.
; kMsgEapAMErrTlsServerAlert_60
[1374]
Short-desc = Server issued alert export restriction.
Long-desc = Contact your network administrator.
; kMsgEapAMErrTlsServerAlert_70
[1375]
Short-desc = Server issued alert protocol version.
Long-desc = Contact your network administrator.
; kMsgEapAMErrTlsServerAlert_71
[1376]
Short-desc = Server issued alert insufficient security.
Long-desc = Contact your network administrator.
; kMsgEapAMErrTlsServerAlert_80
[1377]
Short-desc = Server issued alert internal error.
Long-desc = Try the operation again. If the problem persists, contact your
network administrator.
; kMsgEapAMErrTlsServerAlert_90
[1378]
Short-desc = Server issued alert user canceled.
Long-desc = Try the operation again. If the problem persists, contact your
network administrator.
; kMsgEapAMErrTlsServerAlert_100
[1379]
Short-desc = Server issued alert no renegotiation.
Long-desc = Contact your network administrator.
; kMsgEapAMErrJuacTooManyEESUsers
[1380]
Short-desc = Too many users for EES.
Long-desc = The number of concurrent Enhanced Endpoint Defense
(Malware Protection) users signed into the system has exceeded the
system limit. You can try again in a few minutes, else contact your
network administrator.
; kMsgEapAMErrJuacTooManyPRMUsers
16
Junos Pulse Client Error Messages
[1381]
Short-desc = Too many users for Shavlik remediation.
Long-desc = The number of concurrent Shavlik Remediation users signed
into the system has exceeded the system limit. You can try again in a few
minutes, else contact your network administrator.
; kMsgEapAMErrPromptTimeout
[1382]
Short-desc = User input timeout.
Long-desc = Pulse timed out waiting for user input.<br><br>Pulse will
attempt to connect again shortly. Press Retry to start right away.
; kMsgEapAMErrPromptNotAllowed
[1383]
Short-desc = User prompt not allowed.
Long-desc = Pulse UI prompts are not allowed at this time. This may be a
result of misconfiguration related to machine connection. Please contact
your network administrator.
; kMsgEapAMErrJuacFipsRequired
[1384]
Short-desc = FIPS mode required.
Long-desc = You are not allowed to make this connection because the
server has indicated that it will only allow connections from a Junos Pulse
client running in FIPS mode. Please contact your administrator for more
information.
; kMsgEapAMErrJuacFipsRequiredNotSupportedOnPlatform
[1385]
Short-desc = FIPS mode required.
Long-desc = You are not allowed to make this connection because the
server has indicated that it will only allow connections from a Junos Pulse
client running in FIPS mode. FIPS mode is not currently available in Pulse
on this operating system.
; JUNS catalogUtil requires catalog message files to be saved with UTF-8
encoding, which put 3 bytes {0xEF, 0xBB, 0xBF} at the file beginning
called Byte Order Mark (BOM) for UTF-8 files . For modifications in this
files, please use Text Editors which persist these BOM bytes (like
Notepad.exe, Visual Studio IDE, etc).
;
; PulseNetworkStateError messages.
;
; kMsgIntegrationAMStatusNone
17
Junos Pulse Client Error Messages
[1900]
Short-desc =
Long-desc =
; kMsgIntegrationAMStatusLinkFailure
[1901]
Short-desc = Association failed.
Long-desc = Assocation to the network has failed.
; kMsgIntegrationAMStatusInternetFailure
[1902]
Short-desc = No Internet Access.
Long-desc = Internet detection on the network has failed.
; kMsgIntegrationAMStatusAuthFailure
[1903]
Short-desc = Invalid username or password.
Long-desc = Authentication to the network has failed.
; kMsgIntegrationAMStatusCaptivePortalFailure
[1904]
Short-desc = Web based authentication failure.
Long-desc = The browser based login to the network has timed out or
failed.
; kMsgIntegrationAMStatusCertificateError
[1905]
Short-desc = Invalid certificate.
Long-desc = The certificate credential is invalid or unavailable.
; kMsgIntegrationAMStatusSuppressed
[1906]
Short-desc = Network suppressed.
Long-desc = Access to the network is blocked by policy while a higher
priority network is connected.
;
; Detailed connection status messages.
;
; kMsgIntegrationAMStatusAutoConnect
[1950]
Short-desc = Auto connection in progress ...
18
Junos Pulse Client Error Messages
Long-desc = The network is attempting to connect automatically based on
configuration settings.
; kMsgIntegrationAMStatusCancellingConnect
[1951]
Short-desc = Cancelling connection ...
Long-desc = Cancelling the attempt to connect the network.
; kMsgIntegrationAMStatusLinkSensed
[1952]
Short-desc = Medium detected.
Long-desc = The physical network medium has been detected.
; kMsgIntegrationAMStatusLinkConnecting
[1953]
Short-desc = Connecting to medium ...
Long-desc = Attempting to connect to the physical network medium.
; kMsgIntegrationAMStatusLinkConnected
[1954]
Short-desc = Connected to medium.
Long-desc = Connected to the physical network medium.
; kMsgIntegrationAMStatusWaitingForKey
[1955]
Short-desc = Waiting for network key ...
Long-desc = Waiting for the user to input the network configuration key.
; kMsgIntegrationAMStatusWaitingForCredentials
[1956]
Short-desc = Waiting for user credentials ...
Long-desc = Waiting on the user to input their login credentials.
; kMsgIntegrationAMStatusAuthenticating
[1957]
Short-desc = Authenticating ...
Long-desc = Attempting to authenticate the user credentials with the
network.
; kMsgIntegrationAMStatusReauthenticating
[1958]
Short-desc = Retrying authentication ...
19
Junos Pulse Client Error Messages
Long-desc = Attempting to authenticate the user credentials with the
network again.
; kMsgIntegrationAMStatusDetectingVenue
[1959]
Short-desc = Detecting venue ...
Long-desc = Detecting network venue.
; kMsgIntegrationAMStatusWaitingForUserConsent
[1960]
Short-desc = Waiting for user consent ...
Long-desc = Waiting on the user to accept a consensual agreement.
; kMsgIntegrationAMStatusDetectingInternet
[1961]
Short-desc = Detecting Internet ...
Long-desc = Attempting to detect the Internet on the network.
; kMsgIntegrationAMStatusLoggingOff
[1962]
Short-desc = Logging off ...
Long-desc = Logging the user out of the network.
; kMsgIntegrationAMStatusLoggedOff
[1963]
Short-desc = Logged off.
Long-desc = The user is logged off of the network.
; kMsgIntegrationAMStatusLinkDisconnecting
[1964]
Short-desc = Disconnecting from medium ...
Long-desc = Disconnecting from the physical network medium.
; kMsgPCLConnected
[3000]
Short-desc = Connected.
Long-desc = Pulse connected to the IVE.
; kMsgPCLInvalidParameter
[3001]
Short-desc = Invalid arguments.
Long-desc = Invalid arguments have been specified.
20
Junos Pulse Client Error Messages
; kMsgPCLConnectError
[3002]
Short-desc = Connection error.
Long-desc = Connection error.
; kMsgPCLConnectedWithError
[3003]
Short-desc = Connected with error.
Long-desc = Pulse connection established with error.
; kMsgPCLConnectedNotExist
[3004]
Short-desc = connection does not exist.
Long-desc = connection does not exist.
; kMsgPCLCancelled
[3005]
Short-desc = Cancelled.
Long-desc = Pulse connection cancelled by user.
; kMsgPCLCertError
[3006]
Short-desc = Invalid client certificate.
Long-desc = Invalid client certificate.
; kMsgPCLTimeout
[3007]
Short-desc = Timeout.
Long-desc = Pulse connection timeout.
; kMsgPCLNoUserConnection
[3008]
Short-desc = User connection not allowed.
Long-desc = Pulse connection has failed, user connection not allowed.
; kMsgPCLNoPolicyOverride
[3009]
Short-desc = Policy override not allowed.
Long-desc = Pulse connection has failed, policy override not allowed.
; kMsgPCLNotRunning
21
Junos Pulse Client Error Messages
[3010]
Short-desc = Pulse is not running.
Long-desc = Pulse is not running.
; kMsgPCLDisconnected
[3011]
Short-desc = Pulse disconnected.
Long-desc = Pulse disconnected.
; kMsgPCLExited
[3012]
Short-desc = Pulse has exited.
Long-desc = Pulse has exited.
; kMsgPCLAlreadyConnected
[3020]
Short-desc = Already connected.
Long-desc = Pulse is already connected to the IVE.
; kMsgPCLAlreadyDisconnected
[3021]
Short-desc = Already disconnected.
Long-desc = Pulse is already disconnected from the IVE.
; kMsgPCLGenericError
[3100]
Short-desc = Unecpected error.
Long-desc = Unecpected error.
; JUNS catalogUtil requires catalog message files to be saved with UTF-8
encoding, which put 3 bytes {0xEF, 0xBB, 0xBF} at the file beginning
called Byte Order Mark (BOM) for UTF-8 files . For modifications in this
files, please use Text Editors which persist these BOM bytes (like
Notepad.exe, Visual Studio IDE, etc).
;kMsgIveAMErrInstanceAlreadyInUse
[1100]
Short-desc = Instance already in use.
Long-desc =
;kMsgIveAMErrLoadingStore
[1101]
Short-desc = Failed to load store.
22
Junos Pulse Client Error Messages
Long-desc = Restart your system. If the problem persists, contact your
network administrator.
;kMsgIveAMErrLoadConnection
[1102]
Short-desc = Failed to load connection.
Long-desc = Retry the operation. If the problem persists, contact your
network administrator.
;kMsgIveAMErrRetrieveURI
[1103]
Short-desc = Could not retrieve Uniform Resource Identifier (URI).
Long-desc = Retry the operation. If the problem persists, contact your
network administrator.
;kMsgIveAMErrInitiateConnect
[1104]
Short-desc = Failed to initiate the connection.
Long-desc = Retry the operation. If the problem persists, contact your
network administrator.
;kMsgIveAMErrConnectingChannel
[1105]
Short-desc = Error connecting channel.
Long-desc = Error Connecting channel (stage: {0}, error: {1}).
;kMsgIveAMErrAccessMethod
[1106]
; generic access method connection error
Short-desc = Error {0} provisioning access method connection.
Long-desc = Error provisioning access method {0}; error can vary based
on the access method.
;kMsgIveAMErrInvalidCertificate
[1107]
Short-desc = Invalid server certificate.
Long-desc = Server certificate validation failed. If you are certain that this
is a valid destination, click Retry to continue. Otherwise, click Close and
contact your network administrator.
;kMsgIveAMErrConnectionFailed
[1108]
Short-desc = Connection failed.
23
Junos Pulse Client Error Messages
Long-desc = Retry the operation. If the problem persists, contact your
network administrator.
;kMsgIveAMErrSessionExpired
[1109]
Short-desc = Session expired.
Long-desc = Your connection to the network has expired due to inactivity.
Please log in again to establish connectivity.
;kMsgIveAMErrProtocol
[1110]
Short-desc = Unable to communicate with the server.
Long-desc = The server can't respond to Juniper networking requests.
This could be due to the server being down, or connecting to a server
that's not a Juniper server. If this condition persists, please contact your
administrator.
;kMsgIveAMErrHostUnknown
[1111]
Short-desc = Host not found.
Long-desc = Hostname could not be resolved using the Domain Name
System (DNS). Please try again. If your system allows you to edit your
connections and you know the destination's IP address, try this
connection using the IP address. If the problem persists, contact your
network administrator.
;kMsgIveAMErrPulseSubsystem
[1112]
Short-desc = Pulse sub-system error.
Long-desc = Retry the operation. If the problem persists, contact your
network administrator.
;kMsgIveAMErrCancelled
[1113]
Short-desc = Canceled.
Long-desc = The operation has been canceled.
;kMsgIveAMErrAuthentication
[1114]
Short-desc = Authentication error.
Long-desc = Retry the operation. Make sure you are using current
credentials. If you recently changed your password and Pulse is using
saved settings, you must use the Forget Saved Settings feature to be
prompted again for your login credentials.
24
Junos Pulse Client Error Messages
;kMsgIveAMErrNetwork
[1115]
Short-desc = Network error.
Long-desc = Network errors can be caused by temporary conditions such
as an invalid IP address, a server not available, and so on. Please try the
operation again. Restart your system and try the operation again. If the
problem persists, contact your network administrator.
;kMsgIveAMErrServer
[1116]
Short-desc = Server error.
Long-desc = The server is not available. Please try again later. If the
problem persists, contact your network administrator.
;kMsgIveAMErrUIPromptFailed
[1117]
Short-desc = UI prompt failed.
Long-desc = Please try the operation again. If the problem persists,
contact your network administrator.
;kMsgIveAMErrUIPromptTimedout
[1118]
Short-desc = UI prompt timed-out.
Long-desc = Please try the operation again.
;kMsgIveAMErrNoProxy
[1119]
Short-desc = Proxy not available.
Long-desc = The proxy system is not currently available. Please try again
later. If the problem persists, contact your network administrator.
;kMsgIveAMErrConnectionClosed
[1120]
Short-desc = Connection closed.
Long-desc = The server has reset this connection. You must login again
to establish connectivity.
;kMsgIveAMErrVLANChange
[1121]
Short-desc = VLAN Hash changed
Long-desc = VLAN Hash changed to {0}.
;kMsgIveAMErrCompliance
25
Junos Pulse Client Error Messages
[1122]
Short-desc = Endpoint is out of compliance.
Long-desc = Access was refused because your system does not meet
security requirements. Some issues can be fixed automatically, and then
you can try the login again. For other issues, please click the link to see
the actions you can take to resolve the issue.
;kMsgSuspendForUpdate
[1123]
Short-desc = Connection suspended for component upgrade
Long-desc = The Connection has been temporarily terminated to allow
the system to update components. The connection will resume when the
update is complete.
; kMsgIveAMUnknownFatalError
[1124]
Short-desc = The access server has encountered an error.
Long-desc = The access server has encountered an error {0} that
prevents this client from obtaining access. Contact your administrator.
; kMsgAMErrNcIpAllocFail
[1125]
Short-desc = Unable to allocate address for client
Long-desc = The Remote Access server was unable to allocate a network
address for your client. Contact your administrator.
; kMsgIveAMErrNcWrongClient
[1126]
Short-desc = Connection not configured for Junos Pulse
Long-desc = You have chosen, or were assigned, a realm and role that
are not configured for Junos Pulse. Disconnect, clear your saved
settings, reconnect, and choose another username, realm or role. If this
error persists, please contact your administrator.
; kMsgIveAMErrUACMultipleClients
[1127]
Short-desc = Too many connections from the same endpoint
Long-desc = The access server you are connecting to does not allow
connections from both Pulse and Odyssey Access Client. Please
disconnect your connection from OAC to continue.
; kMsgIveAMErrNoRoaming
[1128]
Short-desc = Roaming not allowed for connection
26
Junos Pulse Client Error Messages
Long-desc = The network address of this client has changed since the
client originally authenticated, which is not allowed.
; kMsgIveAMUnknownMethodError
[1129]
Short-desc = Server requested policy for unknown access method.
Long-desc = The server requested a policy for an access method that is
unknown or not installed.
; kMsgIveAMMethodFailed
[1130]
Short-desc = Unable to load access method.
Long-desc = The access method failed to initialize properly. This could
be caused by attempting to connect to multiple remote access devices
simultaneously.
; kMsgIveAMSessionInvalid
[1131]
Short-desc = Invalid authentication session.
Long-desc = The server reported an invalid user authentication session
{0}.
; kMsgIveAMServerError
[1132]
Short-desc = Server detected error.
Long-desc = The server detected error {0} during your session. Please
contact your administrator.
;kMsgIveAMNetworkUnreachable
[1133]
Short-desc = Network unreachable
Long-desc = Network unreachable
;kMsgIveAMErrSAAccessMethodLoaded
[1134]
Short-desc = Too many remote access methods
Long-desc = The server attempted to configure more than one remote
access method, when only one is allowed. Please contact your
administrator.
;kMsgIveAMErrSAAccessMethodLoadedOtherInstance
[1135]
Short-desc = Remote access already provided by another connection.
27
Junos Pulse Client Error Messages
Long-desc = The connection attempted to provide remote access
services, however, another connection is already providing remote
access. Disconnect the other connection and try again.
;kMsgIveAMErrTransport
[1136]
Short-desc = Unable to load communication module.
Long-desc = Failed to load the communication module. Check the Pulse
installation, and try again.
;kMsgIveAMSessionTerminated
[1137]
Short-desc = Login session terminated by server.
Long-desc = Your login session has been terminated. Please log in
again.
;kMsgIveAMSessionTimeout
[1138]
Short-desc = Login session expired.
Long-desc = Your login session has been expired by the server. Please
log in again.
;kMsgIveAMSessionRoleChange
[1139]
Short-desc = Access options have changed.
Long-desc = The server has requested that your remote access method
be changed. You will be reconnected automatically.
;kMsgIveAMConnectionRouteChange
[1140]
Short-desc = The network route to server has changed.
Long-desc = The network route to the server has changed. You will be
reconnected automatically.
;kMsgIveAMErrInstanceAlreadyConnected
[1200]
Short-desc = Multiple secure connections attempted.
Long-desc = Network policies support only one secure connection at a
time. To create a new secure connection, you must first disconnect your
current secure connection.
;kMsgNcAMErrInstanceAlreadyStarting
[1201]
Short-desc = Another secure session is connecting.
28
Junos Pulse Client Error Messages
Long-desc =
;kMsgNcAMErrInstanceDisconnecting
[1202]
Short-desc = Another secure session is disconnecting.
Long-desc =
;kMsgNcAMErrGetUserContext
[1203]
Short-desc = Failed to get user context.
Long-desc = Please try the operation again. If the problem persists,
contact your network administrator.
;kMsgNcAMErrGetProxyInfo
[1204]
Short-desc = Failed to get proxy info.
Long-desc = Please try the operation again. If the problem persists,
contact your network administrator.
;kMsgNcAMErrSetupVA
[1205]
Short-desc = Failed to setup virtual adapter.
Long-desc = Restart your system and try again. If the problem persists,
contact your network administrator.
;kMsgNcAMErrSendMessage
[1206]
Short-desc = Failed to send message to the access method.
Long-desc = Restart your system and try again. If the problem persists,
contact your network administrator.
;kMsgNcAMErrSetupHosts
[1207]
Short-desc = Failed to configure hosts file.
Long-desc = Restart your system and try again. If the problem persists,
contact your network administrator.
;kMsgNcAMErrToggleDNS
[1208]
Short-desc = Failed to restart DNS service.
Long-desc = Restart your system and try again. If the problem persists,
contact your network administrator.
;kMsgNcAMErrSetIEProxy
29
Junos Pulse Client Error Messages
[1209]
Short-desc = Failed to setup IE proxy.
Long-desc = Restart your system and try again. If the problem persists,
contact your network administrator.
;kMsgNcAMSetFFProxy
[1210]
Short-desc = Failed to setup Firefox proxy.
Long-desc = Restart your system and try again. If the problem persists,
contact your network administrator.
;kMsgNcAMErrDiffConfig
[1211]
Short-desc = Different NC config, disconnect.
Long-desc = New NC config is different than the older one. Will
disconnect.
;kMsgNcAMErrRouteMonitor
[1212]
Short-desc = NC route conflict detected, disconnect.
Long-desc = There is a route conflict detected in the routing table. Will
disconnect.
;kMsgNcAMErrUnknownMsg
[1213]
Short-desc = Remote access failed unexpectedly, retrying connection.
Long-desc = There was an unexpected error from the remote access
service. The connection will disconnect and retry.
;kMsgNcAMErrEspOnlyFailed
[1214]
Short-desc = Fallback to SSL disabled by administrator
Long-desc = The ipsec connection to the server failed, and fallback to
SSL is disabled by the administrator. The connection will be retried.
;kMsgNcAMErrEspOnlyThroughProxy
[1215]
Short-desc = ESP-only connection through web proxy is not supported
Long-desc = The ESP connection to the server through web proxy is not
supported, and fallback to SSL is disabled by the administrator.
;kMsgSamAMLegacyWSAMFound
[1251]
Short-desc = WSAM is running.
30
Junos Pulse Client Error Messages
Long-desc = WSAM is already running. Please stop WSAM and try again.
;kMsgSamAMErrJnprTdiInstall
[1252]
Short-desc = jnprTdi driver is not installed.
Long-desc = Please re-install Pulse and try again. If the problem persists,
contact your network administrator.
;kMsgSamAMErrJnprTdiStart
[1253]
Short-desc = Failed to start jnprTdi driver.
Long-desc = Restart your system and try again. If the problem persists,
contact your network administrator.
;kMsgSamAMErrJnprTdiOpen
[1254]
Short-desc = Failed to open jnprTdi device.
Long-desc = Restart your system and try again. If the problem persists,
contact your network administrator.
;kMsgSamAMErrRebootRequired
[1255]
Short-desc = A system reboot is required.
Long-desc = A system reboot is required for SAM Access method. Please
reboot your system.
;kMsgSamErrInitFailed
[1256]
Short-desc = Failed to initialize SAM Access Method.
Long-desc = Please try again. If the problem persists, contact your
network administrator.
;kMsgSamErrIVEHostNotFound
[1257]
Short-desc = Failed to resolve host.
Long-desc = Hostname could not be resolved using the Domain Name
System (DNS). Please try again.
; JUNS catalogUtil requires message catalog files to be saved with UTF-8
encoding, which put 3 bytes {0xEF, 0xBB, 0xBF} at the file beginning
called Byte Order Mark (BOM) for UTF-8 files . For modifications in this
files, please use Text Editors which persist these BOM bytes (like
Notepad.exe, Visual Studio IDE, etc).
;kMsgCommonCertTrustNoError
31
Junos Pulse Client Error Messages
[1700]
Short-desc = No error found for this certificate or chain.
Long-desc = The network resource for this connection has been verified
and can be trusted.
;kMsgCommonCertTrustIsNotTimeValid
[1701]
Short-desc = This certificate or one of the certificates in the certificate
chain is not time valid.
Long-desc = The system time on your endpoint may be incorrect, the
certificate may have expired, or the time of the system that signed the
certificate might have been incorrect. Verify that the clock on your
computer is accurate. If your computer clock is accurate, then network
resource for this connection cannot be verified. Contact your network
administrator.
;kMsgCommonCertTrustIsNotTimeNested
[1702]
Short-desc = Certificates in the chain are not properly time nested.
Long-desc = This message indicates that the certificate chain is corrupted
or otherwise unreliable. The network resource for this connection cannot
be verified. Contact your network administrator.
;kMsgCommonCertTrustIsRevoked
[1703]
Short-desc = Trust for this certificate or one of the certificates in the
certificate chain has been revoked.
Long-desc = The network resource for this connection cannot be verified.
Contact your network administrator.
;kMsgCommonCertTrustIsNotSignatureValid
[1704]
Short-desc = The certificate or one of the certificates in the certificate
chain does not have a valid signature.
Long-desc = The network resource for this connection cannot be verified.
Contact your network administrator.
;kMsgCommonCertTrustIsNotValidForUsage
[1705]
Short-desc = The certificate or certificate chain is not valid for its
proposed usage.
Long-desc = This status message indicates that the certificate is not
properly enabled for use in the current application. The network resource
for this connection cannot be verified. Contact your network administrator.
;kMsgCommonCertTrustIsUntrustedRoot
32
Junos Pulse Client Error Messages
[1706]
Short-desc = The certificate or certificate chain is based on an untrusted
root.
Long-desc = The network resource for this connection cannot be verified.
Contact your network administrator.
;kMsgCommonCertTrustRevocationStatusUnknown
[1707]
Short-desc = The revocation status of the certificate or one of the
certificates in the certificate chain is unknown.
Long-desc = Before accepting a certificate, the system must make sure
that the certificate has not been revoked. The system cannot verify that
the certificate is valid. Contact your network administrator.
;kMsgCommonCertTrustIsCyclic
[1708]
Short-desc = One of the certificates in the chain was issued by a
certificate authority that the original certificate had certified.
Long-desc = The system cannot verify that the certificate is valid. Contact
your network administrator.
;kMsgCommonCertTrustInvalidExtension
[1709]
Short-desc = One of the certificates has an extension that is not valid.
Long-desc = The system cannot verify that the certificate is valid. Contact
your network administrator.
;kMsgCommonCertTrustInvalidPolicyConstraints
[1710]
Short-desc = The certificate or certificate chain has a policy constraints
extension.
Long-desc = The system cannot verify that the certificate is valid. Contact
your network administrator.
;kMsgCommonCertTrustInvalidBasicConstraints
[1711]
Short-desc = The certificate or certificate chain has a basic constraints
extension.
Long-desc = The system cannot verify that the certificate is valid. Contact
your network administrator.
;kMsgCommonCertTrustInvalidNameConstraints
[1712]
Short-desc = The certificate or one of the certificates in the certificate
chain has a name constraints extension that is not valid.
33
Junos Pulse Client Error Messages
Long-desc = The system cannot verify that the certificate is valid. Contact
your network administrator.
;kMsgCommonCertTrustHasNotSupportedNameConstraint
[1713]
Short-desc = The certificate or one of the certificates in the certificate
chain has a name constraints extension that contains unsupported fields.
Long-desc = The system cannot verify that the certificate is valid. Contact
your network administrator.
;kMsgCommonCertTrustHasNotDefinedNameConstraint
[1714]
Short-desc = The certificate or one of the certificates in the certificate
chain has a name constraints extension and a name constraint is missing
for one of the name choices in the end certificate.
Long-desc = The system cannot verify that the certificate is valid. Contact
your network administrator.
;kMsgCommonCertTrustHasNotPermittedNameContraint
[1715]
Short-desc = The certificate or one of the certificates in the certificate
chain has a name constraints extension, and there is not a permitted
name constraint for one of the name choices in the end certificate.
Long-desc = The system cannot verify that the certificate is valid. Contact
your network administrator.
;kMsgCommonCertTrustHasExcludedNameConstraint
[1716]
Short-desc = The certificate or one of the certificates in the certificate
chain has a name constraints extension, and one of the name choices in
the end certificate is explicitly excluded.
Long-desc = The system cannot verify that the certificate is valid. Contact
your network administrator.
;kMsgCommonCertTrustIsPartialChain
[1717]
Short-desc = The certificate chain is not complete.
Long-desc = The system cannot verify that the certificate is valid. Contact
your network administrator.
;kMsgCommonCertTrustCtlIsNotTimeValid
[1718]
Short-desc = A Certificate Trust List used to create this chain was not
time valid.
34
Junos Pulse Client Error Messages
Long-desc = The system cannot verify that the certificate is valid. Contact
your network administrator.
;kMsgCommonCertTrustCtlIsNotSignatureValid
[1719]
Short-desc = A Certificate Trust List used to create this certificate chain
did not have a valid signature.
Long-desc = The system cannot verify that the certificate is valid. Contact
your network administrator.
;kMsgCommonCertTrustCtlIsNotValidForUsage
[1720]
Short-desc = A Certificate Trust List used to create this chain is not valid
for this usage.
Long-desc = The system cannot verify that the certificate is valid. Contact
your network administrator.
;kMsgCommonCertTrustIsOfflineRevocation
[1725]
Short-desc = The revocation servers for end certificate or its chain
certificates are offine.
Long-desc = Try the operation again. If the problem persists, contact your
network administrator.
;kMsgCommonCertTrustNoIssuanceChainPolicy
[1726]
Short-desc = The end certificate does not any issuance policy.
Long-desc = The system cannot verify that the certificate is valid. Contact
your network administrator.
;kMsgCommonCertTrustIsExplicitDistrust
[1727]
Short-desc = The end certificate is explicitly not trusted.
Long-desc = The system cannot verify that the certificate is valid. Contact
your network administrator.
;kMsgCommonCertHasNotSupportedCriticalExt
[1728]
Short-desc = The end certificate has a unsupported critical extension.
Long-desc = The system cannot verify that the certificate is valid. Contact
your network administrator.
[1730]
;kMsgCommonCertTrustPulseCertificateError
35
Junos Pulse Client Error Messages
Short-desc=Certificate Error
Long-desc=Certificate Error
[1731]
;kMsgCommonCertTrustPulseAuthServerIdentityNotFound
Short-desc = Authentication server not trusted.
Long-desc = Authentication server identity not found in client's "Trusted
Server List". Contact your network administrator.
;kMsgCommonCertTrustPulseDoesntMatch
[1732]
Short-desc = The certificate name does not match the server you are
trying to connect to.
Long-desc = All certificates contain the name of the server to insure that
your connection has not been compromised. If you are accessing a
server with a different name, this warning will appear. If you are in a
location where it is possible that your network connection is
compromised, then please contact your administrator to make sure that
the server thumbprint is correct.
;kMsgUISmartcardPinError
[1733]
Short-desc = Incorrect PIN.
Long-desc = Please be careful when re-entering the PIN because if you
exceed the retry count you will lock the token.
;kMsgUISmartcardBlockedError
[1734]
Short-desc = Smartcard blocked.
Long-desc = Please contact the administrator for unblocking the
smartcard.
; JUNS catalogUtil requires catalog message files to be saved with UTF-8
encoding, which put 3 bytes {0xEF, 0xBB, 0xBF} at the file beginning
called Byte Order Mark (BOM) for UTF-8 files . For modifications in this
files, please use Text Editors which persist these BOM bytes (like
Notepad.exe, Visual Studio IDE, etc).
;kMsgCommonErrOk
[0]
Short-desc = Success.
Long-desc = Operation succeeded.
;kMsgCommonErrFailure
[1]
36
Junos Pulse Client Error Messages
Short-desc = General failure.
Long-desc = Try the operation again. If the problem persists, contact your
network administrator.
;kMsgCommonErrConnection
[2]
Short-desc = Internal IPC connection has failed.
Long-desc = Try the operation again or even restarting the machine. If
the problem persists, contact your network administrator.
;kMsgCommonErrUnimplemented
[3]
Short-desc = Command or feature is unimplemented
Long-desc = Contact your network administrator.
;kMsgCommonErrParameter
[4]
Short-desc = Parameter is invalid.
Long-desc = Try the operation again. If the problem persists, contact your
network administrator.
;kMsgCommonErrInvalidHandle
[5]
Short-desc = Invalid handle.
Long-desc = Try the operation again. If the problem persists, restart your
system.
;kMsgCommonErrBufferSize
[6]
Short-desc = Supplied buffer is too small.
Long-desc = Try the operation again. If the problem persists, restart your
system.
;kMsgCommonErrOutOfMemory
[7]
Short-desc = Out of memory
Long-desc = Try the operation again. If the problem persists, try freeing
up some memory by closing unwanted applications. If the problem still
persists, then restart your system.
;kMsgCommonErrNotStarted
[8]
Short-desc = IO subsystem was not started.
37
Junos Pulse Client Error Messages
Long-desc = Try the operation again. If the problem persists, restart your
system.
;kMsgCommonErrUnknownCommand
[9]
Short-desc = Service received an unknown command.
Long-desc = Try the operation again. If the problem persists, restart your
system.
;kMsgCommonErrIoSystem
[10]
Short-desc = IO sub system has generally malfunctioned.
Long-desc = Try the operation again. If the problem persists, restart your
system.
;kMsgCommonErrNotFound
[11]
Short-desc = Request item is not found.
Long-desc = Try the operation again. If the problem persists, contact your
network administrator.
;kMsgCommonErrAlreadyExists
[12]
Short-desc = Request entity already exists.
Long-desc = Try the operation again. If the problem persists, contact your
network administrator.
;kMsgCommonErrAlreadyStarted
[13]
Short-desc = Request entity was already started.
Long-desc = Try the operation again. If the problem persists, contact your
network administrator.
;kMsgCommonErrInvalidService
[14]
Short-desc = Entity has an invalid code signing signature.
Long-desc = Contact your network administrator.
;kMsgCommonErrCancelled
[15]
Short-desc = Operation canceled.
Long-desc = Try the operation again. If the problem persists, contact your
network administrator.
38
Junos Pulse Client Error Messages
;kMsgCommonErrShutdown
[16]
Short-desc = Connection has been shutdown.
Long-desc = The server has reset the connection. You must login again
to reconnect.
;kMsgCommonPassAnySuppTypeArg, used for passing thru any
supported data type argument
[999]
Short-desc = {0}
Long-desc = {0}
39
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement