Balance HE-CLOCK-86

Balance HE-CLOCK-86
 145 mm
210 mm
INSTRUCTION
A.HOW TO SET UP THE TIME
1.REMOVE THE 2PCS CLOCKS FROM THE HOLDER.
2.INSERT 1PC AABATTERY INTO THE BATTERY HOLDER, TO EACH CLOCK.
3.USE THE TIME KNOB TO ADJUST THE TIME AS YOU WANT.
4 PUT BACK THE CLOCK WITH THE MAGNETS.
5.PLEASE KINDLY REMOVE THE BATTERY, IF LONG TIME NO USE THE CLOCK.
MAGNET
TIME
KNOB
Battery Holder
HOLDER
A1 A2
B.HOW TO HANG ON THE WALL
1.USING THE METAL SHEET TO MARK THE 4 DOTS ON THE WALL.
2.DRILL FOUR 1/4 INCH HOLES ON THE MARKED DOTS.
3.FITTHE ENCLOSED WALLPLUG INTO THE HOLES.
4. SCREW THE METAL SHEET ON THE WALL USE THE PROVIDED
DRYWALL SCREW.
5.FINALLY ATTACHED THE CLOCK CASE.
| И
“=== ©
METAL SHEET METAL SHEET
B1 B2
REMARK : THE CLOCKS USED INDOOR,
NOT SUITABLE FOR OUTDOOR USE.
Made In China
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement