advertisement
PARTS LIST/ TECHNICAL GUIDE
ANALOGUE QUARTZ Cal. 4T57A
[SPECIFICATIONS]
Cal. No.
Item
4T57A
•
3 Hands (Hour, Minute, Second)
•
Chronograph (Minute, Second, 1/10 second)
•
Calendar
•
Diameter
Outside : Ø29.50 mm (12H - 6H) × 26.00 mm
• Height: 4.57 mm
Interval of hands movement
1 second
Driving system
Additional function
C r o w n operation
Normal position
1st click position
2nd click position
Loss/gain
Two pole stepping motor, Step motor 3 pieces
• Electronic circuit reset switch
• Train wheel setting device
• [Time]
Indicated by the Hour, Minute, Second and Calendar
• [Stopwatch]
Up to 1 minutes in 1/10 second (2 seconds per round)
Up to 60 minutes in 1 second split time
Free
Date setting(clockwise)
Time setting, hand position adjustment / resetting the circuit
Monthly rate: Less than 20 seconds (at normal temperature range)
Regulation system
Gate time for rate measurement
Current consumption
Coil resistance
Power supply
Battery No.
Battery voltage
Battery life
Number of jewels
Nil
Use 10-second gate
Movement: Less than 2.20 μA
Circuit block: Less than 1.04 μA
4002004 (COIL BLOCK A)
1.0 - 1.2 KΩ
4002923 (COIL BLOCK B)
1.28 - 1.48 KΩ
SEIKO SR920SW(SEIZAIKEN) Silver oxide battery
1.55 V
Approx. 2 years
0 jewels
1/11
PARTS LIST
Order of disassembly: 1
Order of assembly: 55
55
1
Types of oil
AO-3
AO-2
Oil quantity
1 HOuR, mINuTE
AND
SEcONd HANdS
2 HOuR, mINuTE
AND
SEcONd HANdS
Cal. 4T57A
Normal quantity
4 AUxILIARy TRAIN
WHEEl BRIdgE ScREW
0012 079
5 dATE dIAl guARd
0808 368
6 dATE dIAl
3 DIAL
7 AuxIlIARy TRAIN WHEEl
BRIdgE
0126 368
8 dATE cORREcTOR
WHEEl
0806 368
15 CHRONOGRAPH
SEcONd WHEEl
0888 009
16 INTERmEdIATE
CHRONOGRAPH
SEcONd WHEEl
0885 002
17 INTERmEdIATE
CHRONOGRAPH mINuTE WHEEl
0886 003
18 CHRONOGRAPH mINuTE WHEEl
0902 008
19 INTERmEdIATE cHRONOgRApH mINuTE
WHEEl ANd pINION
0886 001
2 HOuR WHEEl
0271 407
9 dATE jumpER
0810 368
10 Date driving wheel
0802 368
11 INTERmEdIATE dATE dRIvINg
WHEEl
0817 368
12 INTERmEdIATE WHEEl fOR dATE cORREcTOR HOldER
0836 369
13 INTERmEdIATE WHEEl fOR dATE cORREcTOR (c)
0737 891
14 INTERmEdIATE WHEEl fOR dATE cORREcTOR (B)
0962 891
20 INTERmEdIATE cHRONOgRApH
SEcONd WHEEl
0885 002
21 CHRONOGRAPH
SEcONd WHEEl
0888 009
*All parts code are subject to change without notice.
2/11
PARTS LIST
25 SWITcH SpRINg ScREW
0012 079
29 TRAIN WHEEl BRIdgE (B) ScREW
0012 079
30 TRAIN WHEEl BRIdgE (B)
0125 331
31 fIfTH WHEEl ANd
PINION (B)
0701 014
32 STEp ROTOR (B)
4146 177
33 COIL BLOCK (B)
4002 923
34 ROTOR STATOR (B)
4239 357
Cal. 4T57A
23 BATTERy
24 WINdINg STEm
0351 892
25 SWITcH SpRINg ScREW
0012 079
26 SWITcH SpRINg
4250 064
27 CIRCUIT BLOCK
4004 259
28 BATTERy cONNEcTION(-)
4270 358
35 TRAIN WHEEl BRIdgE (B) ScREW
0012 079
36 TRAIN WHEEl BRIdgE (B)
0125 331
37 STEp ROTOR (B)
4146 177
38 COIL BLOCK (B)
4002 923
39 ROTOR STATOR (B)
4239 357
40 fIfTH WHEEl ANd pINION (B)
0701 014
*All parts code are subject to change without notice.
3/11
PARTS LIST
*1
*1
Cal. 4T57A
41 TRAIN WHEEl BRIdgE (A)
0125 248
42 fOuRTH WHEEl ANd pINION
0241 178
43 THIRd WHEEl ANd pINION
0231 904
44 fIfTH WHEEl ANd pINION (A)
0701 904
45 STEp ROTOR (A)
4146 890
46 mINuTE WHEEl ANd pINION
0261 150
47 cENTER WHEEl ANd pINION
0221 157
48 SETTINg WHEEl
0281 904
49 COIL BLOCK (A)
4002 904
50 ROTOR STATOR (A)
4239 357
51 TRAIN WHEEl SETTINg lEvER
0391 368
52 SETTINg lEvER
0383 368
53 yOKE
0384 470
54 cluTcH WHEEl
0282 890
55 INTERmEdIATE WHEEl fOR dATE cORREcTOR (A)
0962 890
*All parts code are subject to change without notice.
4/11
PARTS LIST
l
Tools and consumables required for disassembling/reassembling
• Movement holder
uNIvERSAl mOvEmENT HOldER (S-682)
Cal. 4T57A
• Watch oils
SEIKO watch oils (AO-3 and AO-2)
AO-3
AO-2
Remarks
6 dATE dIAl
Part code
0878 220
0878 221
Position of crown
3 o’clock
3 o’clock
Position of calendar frame Color of figure
3 o’clock Black
3 o’clock White
Color of background
White
Black
5/11
TECHNICAL GUIDE
The explanation here is only for the particular point of cal.4T57A.
●
Remarks on installing the battery
1) After the battery is replaced with a new one, or after the battery is reinstalled following the repairing procedures, be sure to touch the AC terminal of circuit block and the switch spring with conductive tweezers to reset the circuit as illustrated at right.
Cal. 4T57A
2) When the battery is replaced with a new one, the information stored in the built-in Ic does not correspond with the time actually displayed. Before using the watch, therefore, be sure to reset the IC following the procedure below.
If any of the stopwatch hands should move improperly, also follow the same procedure.
1. Pull out the crown to the second click position.
2. Press the buttons “A” and “B” simultaneously for 2 seconds, and then, release the buttons. The stopwatch second hand turns counterclockwise and stopwatch 1/10 second hand turns clockwise, and then return to where they were.
3. Press button “A” or “B” to reset the stopwatch hands to ”0” position.
* By pressing button “A” , set the stopwatch 1/10 second hand.
* By pressing button “B”, set the stopwatch second and minute hands.
4. Turn the crown to set the hour, and minute and 24-hour hands to the desired time, and push the crown back to the normal position.
6/11
TECHNICAL GUIDE
1 HOuR, mINuTE ANd SEcONd HANdS
●
How to install
1. Place the movement directly on a movement holder or the like and press in the hands.
2. Install the hour, minute and second hands at the
“12”o’clock position.
3. Install the chrono minute and second hands at the
“0”o’clock position.
[ Reference ] The power of press hands
Minute & Hour Hands < 5kg
Second Hand < 5kg
Chrono Minute & Second Hands < 3kg
Cal. 4T57A
23 BATTERy
●
How to remove or install the battery
1) Remove the hook of the switch spring's battery clamp.
2) Insert the battery sideways, and have the hook of the switch spring's battery clamp catch the main plate.
16 Switch spring
1) When Removing
Battery clamp
Main plate
2) When Installing
31 SETTINg STEm
●
How to remove
While pushing the indented portion of the arrow, pull out the setting stem.
Push
7/11
TECHNICAL GUIDE
REMARKS ON INSPECTION AND MEASUREMENT
●
How to measure the current consumption for the whole movement
1. To measure the current consumption for the whole movement, connect the (-) probe to the battery connection (-) and (+) probe to the other metal part of the movement, such as battery clamp or circuit block cover.
* When measuring the current consumption using the SEIKO digital multi-tester (S-860), use the range of 40 μ A of SUPply v (= 1.55 v) & gATE TImE (2 S).
2. Connect the AC component to the positive terminal for 2 seconds until a short circuit occurs to reset the integrated circuit.
3. After the integrated circuit is reset, wait approximately for
10 seconds until a stable measurement is obtained, and then read the measurement.
4. Make sure the read value is less than 2.2 μ A.
Cal. 4T57A
●
How to measure the current consumption for the CIRCUIT BLOCK alone
1. To measure the current consumption for the CIRCUIT BLOCK alone, connect each probe to the appropriate positive (+) or negative (-) input terminal of the CIRCUIT BLOCK (please refer to “Structure of the CIRCUIT BLOCK” below).
* When measuring the current consumption using the SEIKO
Multi-Tester S-860, use the range of 4 μ A of SUPPLy V (= 1.55 v) & gATE TImE (2 S).
2. Repeat the same procedures as 2. and 3. of measuring current consumption for the whole movement above.
* When measuring the current consumption for the circuit block alone, be careful not to damage or deform the pattern of the circuit block.
3. Make sure the read value is less than 1.04 μ A.
8/11
TECHNICAL GUIDE
[Structure of the CIRCUIT BLOCK]
Crystal unit
Output terminal(CG)
Cal. 4T57A
C=MOS=IC
Input terminal (-)
Input terminal (+)
Output terminal(hand moving)
●
Value checking – coil resistance (coil blocks)
Check the resistance of each coil block if they are within the range in the following table.
COIL BLOCK (A)
COIL BLOCK (B)
4002904
4002923
1.0 KΩ – 1.2 KΩ
1.28 KΩ – 1.48 KΩ
9/11
TECHNICAL GUIDE
Cal. 4T57A
DISPLAY AND CROWN/BUTTON OPERATION
Hour hand
Stopwatch 1/10 second hand (moves in 1/10 second increments)
Minute hand
But ton "A" in stopwatch function: Start/Stop
Stopwatch minute hand
(moves in minute increments)
First click: Date setting
Second click: Time setting
Second hand
Stopwatch second hand (moves in second increments)
Crown at normal position
Button "B" in stopwatch function:
Split/Slit release/Reset
* The measurement time indicated by the stopwatch hands that move independently of center hands.
* Stopwatch 1/10 second hand moves for a first minute. After one minute, it indicates the measurement time when it is stopped.
TIME SETTING
1. Pull out the crown to the first click.
2. Turn the crown clockwise until the previous day’s date appears.
3. Pull out the crown to the second click when the second hand is at the 12 o’clock position.
It will stop on the spot and advance the hour and minute hands by turning the crown.
(Check that AM/PM is set correctly.)
* When the crown is at the second click position, do not press any button. Otherwise, the chronograph hands will move.
4. Push the crown back in to the normal position in accordance with a time signal.
* Do not set the date between 9:00 P.M. and 1:00 A.M.
Otherwise, the day may not change properly. If it is necessary to set the date during that time period,
First change the time to any time outside it, set the date and then reset to the correct time.
10/11
TECHNICAL GUIDE
Cal. 4T57A
HOW TO USE THE STOPWATCH
• The measurement time is indicated by the stopwatch hands that move independently of the center hands.
• The stopwatch can measure up to 60 minutes in second. (The watch indicates the measurement time in second increments by ignoring off the 1/10 seconds obtained.)
Standard measurement
Ex) 100m race (press the buttons in the following order: A A B
START STOp (finish)
Stopwatch 1/10 second hand
RESET (Reset to “0’00”)
A
A
B
Stopwatch minute hand
Stopwatch second hand
Accumulated elapsed time measurement
9.8/10 seconds
Ex) Basketball game (press the buttons in the following order: A A
START STOP
(Start of game) (Time out)
RESTART
(Restart of game)
STOp
(Game over)
RESET
A
A A
5 minutes 10, 8/10 seconds 20 minutes 00 seconds
*Restart and stop of the stopwatch can be repeated as many times as necessary by pressing button A
Split time measurement
Ex) 5,000m race (press the buttons in the following order: A B/B A B
B
START
SPLIT/
SplIT RElEASE
STOp RESET
A
A
B
B
2 minutes 50 seconds 15 minutes 10 seconds
*Measurement and release of the split time can be repeated as many times as necessary by pressing button B.
11/11
Copyright©2014 by
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project