Aluratek ATBS01F User manual
Product Highlights Bluetooth Wireless Speaker Tablet Stand Quick Start Guide Durable, light-weight and foldable design makes it the perfect travel companion Aluratek 7 O Dual 2.5 Watt Amp Driven Channel Speakers (85dB) ATBSO1F aluratek.com qsg Q10318 Copyright O 2013 Aluratek, Inc. All Rights Reserved. LED On / Off Switch Micro USB Port - Charge the built-in lithium-ion battery with the included USB cable AUX IN Port - Connect any digital device with a 3.5mm auxiliary audio output V-Frame design and rubber feet provide maximum stability Operation 7 Charging the battery Pairing to a iPhone, iPad, smartphone and tablet The battery is not fully charged and it is highly recommended that you charge ATBS01F before you begin using it. Note: Using ATBSO1F “out of the box” will not harm the device. You will experience reduced battery life as the unit will not be fully charged. To charge the device, connect the USB end of the cable provided to your PC and the charger plug to the charging jack of ATBSO1F. Please charge the battery for a minimum of (5) hours. The Red LED will be on while charging. When charging is complete, the red LED will turn off. Make sure the device supports A2DP profile. The pairing procedure will vary depending on your device. Please refer to the user guide of your device for detail instruction. General pairing procedures are as follows: 1. Turn ON ATBSO1F 2. Activate your device's Bluetooth function and set your device to search for Bluetooth devices. Select “Bluetooth” when it is found. 3. For transmitter with Bluetooth version 2.1, you will not need to input a code. If you are prompted for PIN, please enter “0000”. 4. If prompted by your device to connect, please select “Yes”. 6. After connecting successfully, the green LED will stay on. Note: Please make sure the audio output is set to Bluetooth / ATBSO1F for audio streaming from the device. Tech Support 8 Warranty Information Radio and TV Interference Statement 7 If you need further assistance, please contact the Aluratek support department for troubleshooting prior to returning this device. E-mail: [email protected] Web: www.aluratek.com/support Local (Tustin, CA): 714-586-8730 Toll free: 1-866-580-1978 Aluratek warrants this product against defect in material or workmanship for 1 Year from the date of purchase. For more information, please visit: http://aluratek.com/warranty-return-policy You can register your product online at: http://aluratek.com/product-registration WARNING! This equipment has been tested and found to comply with the a limits of a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by whatever measures may be required to correct the interference.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project