How to use the AM / FM radio
How to operate the tuner
How to use the AM / FM radio
PWR
Button
(SOURCE) MENU
Button
Preset
Switches
TUNE TRACK
Button
AUTO.P
Switch
Listening to the AM/FM radio
 Press (SOURCE) MENU .
 Touch AM to receive AM radio, or
FM to receive FM radio.
When an HD radio tuner is connected, the standard radio (analog radio) is also
controlled through the HD radio tuner. Note that this means the antenna should
be connected to the HD radio tuner.
38
Selecting radio stations
Manual selection
 Press
or
.
(up switch): Raises frequency
(down switch): Lowers frequency
RADIO
• Each pressing of the switch moves the frequency one step up or down. (One step on
the AM band is 10kHz. One step on the FM band is 0.2MHz.)
Automatic selection
 Press and hold the
or
switch until a beep is heard.
• The station that is closest in frequency to the frequency that is currently displayed on
the screen will be searched for automatically, and searching will stop when the station
is received. To stop the search before a station is found, press the button again.
Selection using preset switches
 Touch the preset switch that already has a station recorded.
• Refer to "Saving radio stations" on page 45 for details on saving stations.
If the reception for a particular station is weak in the area you are in, automatic
selection may not work.
39
How to operate the tuner
How to use the AM / FM radio
Saving radio stations
There are two modes for saving radio stations, manual and AUTO.P, and these modes
operate independently.
Saving manually
Confirm that "AUTO.P" is not displayed in the upper part of the screen.
• If "AUTO.P" is displayed, touching AUTO.P will switch the screen to manual.
 Use manual tuning or automatic tuning to select the station to be saved.
 Choose a preset switch and touch it until a beep is heard.
• The radio station (frequency) is set. Touching the preset switch will now tune in the
selected station.
Saving with AUTO.P
 Touch
AUTO.P until a beep is heard.
• The AUTO.P function will be activated and start automatically selecting stations. A
beep will be heard when automatic selection of stations is completed. On touching
AUTO.P again, the display will switch to the previously recorded station.
Changing stations saved by AUTO.P
 Use manual tuning or automatic tuning to select the station to be saved.
 Choose a preset switch and touch it until a beep is heard.
40
About AUTO.P
Touching AUTO.P while AUTO.P is being used or after AUTO.P has been used
will return the preset memories back to the condition they had before AUTO.P was
used. (Doing so will delete the stations saved with AUTO.P.) The flow for switching
from AUTO.P to manual is shown below.
Touch AUTO.P
beep is heard.
Automatically saves
stations to preset switches
until a
Manual
Touch AUTO.P
(Stations saved by AUTO.P are
deleted)
RADIO
Because AUTO.P temporarily saves stations for the preset switches, stations saved
manually will remain in memory even if AUTO.P is used. By manually saving
stations that are used regularly, these manually saved stations can be restored even
after AUTO.P has been used, such as after traveling.
AUTO.P
(starts search)
AUTO.P
(stops search)
• AUTO.P may not automatically receive stations if radio waves in the surrounding
area are weak.
• A station saved by the tuning switch may not match a station saved by AUTO.P
even though the signal is received from the same station.
• Due to conditions for receiving radio waves, saved stations may differ even
when the AUTO.P switch is operated repeatedly in the same location.
• Up to six stations having good reception sensitivity are automatically saved in
order starting from the lowest frequency.
• When less than six stations capable of reception are found, nothing is saved for
the remaining preset switches.
41
How to operate the tuner
How to use the AM / FM radio
Turning off the radio
 Press
PWR .
• Pressing PWR again will turn on the
radio and resume reception of the
radio station (frequency) received
before power was turned off.
42
How to operate the tuner
How to use HD Radio
When an optional HD RADIO (High Definition Radio) tuner is connected, HD RADIO
(High Definition Radio) broadcasts can be received.
PWR
Button
MODE
Switch
(SOURCE) MENU
Button
Preset
Switches
AUTO.P
Switch
Title
Switch
RADIO
TUNE TRACK
Button
Listening to HD RADIO
When receiving HD Radio (High Definition Radio) broadcasts, FM reception has the same
quality as a CD, and AM reception has the same quality as conventional FM sound.
Depending on the reception status, HD Radio can also receive analog broadcasts, which
means reception is still possible in regions with no digital coverage.
 Press (SOURCE) MENU .
 Touch AM to receive AM radio, or
FM to receive FM radio.
• When an HD RADIO tuner is connected and a digital broadcasting program is
received, "DIGITAL" is displayed.
• When an HD RADIO tuner is connected, the
available.
TITLE touch switch becomes
To receive AM/FM analog broadcasting, touch MODE and select "OFF."
43
How to operate the tuner
How to use HD Radio
Selecting radio stations
Manual selection
 Press
or
.
• Each pressing of the switch moves the frequency one step up or down. (One step on
the AM band is 10kHz. One step on the FM band is 0.2MHz.
(up switch): Raises frequency
(down switch): Lowers frequency
Automatic selection
 Press and hold the
or
switch until a beep is heard.
• The station that is closest in frequency to the frequency that is currently displayed on
the screen will be searched for automatically, and searching will stop when the station
is received. To stop the search before a station is found, press the button again.
Selection using preset switches
 Touch the preset switch that already has a station recorded.
• Refer to "Saving radio stations" on page 45 for details on saving stations.
Saving radio stations
There are two modes for saving radio stations, manual and AUTO.P, and these modes
operate independently.
Saving manually
Refer to "How to use the AM / FM radio" on page 40.
If the reception for a particular station is weak in the area you are in, automatic
selection may not work.
44
Saving with AUTO.P
 Touch
AUTO.P until a beep is heard.
Changing stations saved by AUTO.P
Refer to "How to use the AM / FM radio" on page 40.
RADIO
• The AUTO.P function will be activated and start automatically selecting stations. A
beep will be heard when automatic selection of stations is completed.
• When a radio station found by AUTO.P function is stored into the preset switch, the
station already stored in the preset switch will be overwritten.
Displaying information about the current broadcast
When receiving an HD RADIO broadcast, information about the current broadcast, such as
the name of the radio station, the album, the title of the track, the artist, and the musical
genre, can be displayed.
 Touch
TITLE .
• Touch TITLE OFF to return to the
operation screen.
Turning off the radio
 Press
PWR .
• Pressing PWR again will turn on the
radio and resume reception of the
radio station (frequency) received
before power was turned off.
45
How to operate the tuner
How to use the SIRIUS satellite radio
When an optional SIRIUS satellite radio tuner is connected, SIRIUS satellite radio
broadcasts can be received.
PWR
Button
(SOURCE) MENU
Button
Preset
Switches
TUNE TRACK
UP/DOWN
Button
DIRECT
Switch
CATEGORY
Switch
BAND
Switch
TITLE
Switch
Listening to SIRIUS satellite radio
With SIRIUS satellite radio, over 100 channels are available including music, news, and
entertainment programs.
You can select the channel you want from 14 categories such as POP and ROCK, or you can
select a channel by direct input.
Reception of SIRIUS satellite radio is a paid subscription.
 Press (SOURCE) MENU .
 Touch SIRIUS .
Check the SIRIUS ID
The SIRIUS ID number is a 12-digit numerical code that is assigned each time the SIRIUS
satellite radio tuner is connected.
 Touch
SIRIUS ID on the INFORMATION screen.
• A 12-digit numerical code is displayed.
46
Changing the SIRIUS band
 Touch
BAND on the SIRIUS operation screen.
• The BAND changes.
[SIRIUS 1] → [SIRIUS 2] → [SIRIUS 3] ... → return to [SIRIUS 1]
Selecting from the available categories
RADIO
Selecting the channel you want to listen to
 Touch CATEGORY .
 Select the category that you want.
• Touch
or
to switch categories.
If the selected category is unobtainable, the blank category button appears.
Selecting a channel by direct input
 Touch DIRECT .
 Input a channel.
 Touch ENTER .
47
How to operate the tuner
How to use the SIRIUS satellite radio
Displaying information about the current broadcast
During SIRIUS broadcasts, information including the channel name, the album name, the
title, and the artist can be displayed for the current track.
 Touch
TITLE .
• Touch TITLE OFF to return to the
operation screen.
Turning off the SIRIUS
 Press
48
PWR .
49
RADIO
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising