StarTech.com Universal USB 3.0 Laptop Docking Station - Dual Video HDMI DVI VGA with Audio and Ethernet

StarTech.com Universal USB 3.0 Laptop Docking Station - Dual Video HDMI DVI VGA with Audio and Ethernet
HDMI® DVI VGA Dual Video Universal
USB 3.0 Laptop Docking Station
USB3SDOCKHDV
*actual product may vary from photos
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
For the most up-to-date information, please visit: www.startech.com
Manual Revision: 07/21/2014
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not
represent an endorsement of a product or service by StarTech.com, or an endorsement of the
product(s) to which this manual applies by the third-party company in question. Regardless
of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby
acknowledges that all trademarks, registered trademarks, service marks, and other protected
names and/or symbols contained in this manual and related documents are the property of
their respective holders.
Instruction Manual
Table of Contents
Introduction.............................................................................................1
Packaging Contents.................................................................................................................................. 1
System Requirements............................................................................................................................... 1
Rear View....................................................................................................................................................... 2
Side Views..................................................................................................................................................... 2
Installation...............................................................................................3
Verifying Installation................................................................................................................................. 4
Installing the Drivers................................................................................................................................. 4
How to Use...............................................................................................5
Display Modes............................................................................................................................................. 6
Supported Video Resolutions...............................................................9
Inferred Modes............................................................................................................................................ 9
Troubleshooting......................................................................................................................................... 10
Specifications...........................................................................................11
Technical Support...................................................................................12
Warranty Information.............................................................................12
Instruction Manual
i
Introduction
Packaging Contents
• 1 x Docking Station
• 1 x 0.9m USB 3.0 Cable
• 1 x Universal Power Adapter (NA/UK/EU)
• 1 x Installation CD
• 1 x Instruction Manual
System Requirements
• USB 3.0 enabled computer system with available USB 3.0 port
• Available AC electrical outlet
• HDMI® (and either DVI-D or VGA if dual display is desired) enabled display device(s)
e.g. monitor, projector, HTDV, etc. with cables
Instruction Manual
1
Rear View
1
2
3
4
5
6
7
Side Views
8
9
10
7
1. DVI-D Port
6. Microphone Port
2. HDMI Port
7. USB 3.0 Downstream Port
3. VGA Port
8. Security Lock Hole
4. 10/100/1000Mbps LAN (RJ-45) Port
9. USB 3.0 Upstream Port
5. Headphone Port
10.DC IN Port
Instruction Manual
2
Installation
1. Connect the included power adapter from an AC electrical outlet to the USB
Docking Station.
2. Insert the provided Driver CD into the computer’s CD/ DVD drive.
3. Autorun should give you the option to run the Setup.exe application.
If Autorun does not start, Go into “My Computer” and double-click the CD/DVD drive
that the CD is in and run the Setup.exe application.
4. Run the “setup.exe” file on the CD to launch the driver installation program. Follow
the on screen instructions to complete the driver installation.
5. Please wait while the installation program copies the necessary files.
6. Connect the Docking Station to the computer using the included USB 3.0 cable.
Windows will automatically detect and install the drivers.
7. Connect the monitor(s) to the USB Docking Station using HDMI, DVI-D or VGA
cables and power on the monitors. Please choose the dual output connection
combination as either:
a.) HDMI + DVI
b.) VGA + HDMI
NOTE: Please do not connect monitors to the VGA, DVI-D, and HDMI ports
simultaneously. It can cause unexpected errors in your monitor configuration.
8. Windows will start to automatically load the drivers and software for the USB display
adapter. Once complete, you should see this icon in your System Tray:
Instruction Manual
3
Verifying Installation
1. Open the Device Manager by right-clicking on Computer, and then select Manage.
In the new Computer Management window, select Device Manager from the left
window panel (For Windows 8, open the Control Panel and select
Device Manager).
Expand the “Network adapters”, “Sound, video and game controllers” and “Universal
Serial Bus controllers” sections. On a successful install, you should see the following
devices installed with no exclamation points or question marks.
Installing the Drivers
1. Please insert the Driver CD into your computer’s CD-ROM or DVD drive.
2. Click Setup.exe.
3. Select your language and click “I Accept”.
4. Wait until the drivers are installed successfully in your computer.
NOTE: Please ensure that you install the drivers before connecting the docking
station to your computer.
Instruction Manual
4
How to Use
Configuring the image being displayed by the monitor that is connected to the USB
3.0 Docking Station, can be done in one of two ways:
1. Accessing the Windows Display Settings
• Windows XP/Server 2003: right-click on a blank
area of the desktop, select Properties, then click
on the Settings tab:
• Windows Vista: right-click on a blank area
of the desktop, select Personalize, then
select the Display Settings option.
• Windows 8/7/Server 2008 R2: right-click on a blank area of the desktop, select
Screen Resolution.
Instruction Manual
5
1. Right-clicking the DisplayLink tray icon (
) in the system notification area.
Display Modes
“Extend” Display Mode (DEFAULT)
The default display mode; this mode allows the output on the USB 3.0 Docking Station
to work as an “Extended” display to the on-board display (i.e. internal graphics card).
This extended working space improves work efficiency.
You may change the relative position of this extended display through the Windows
Display Settings or the “Extend To” option in the DisplayLink icon menu.
“Extend To” Options
When using the “Extend” display mode, 4 options are available for placement of the
extended display, relative to the primary display: Left, Right, Above, Below. More
fine adjustments to the placement of the extended display can be made through the
Windows Display Settings.
Instruction Manual
6
“Mirror” Display Mode
This mode allows the same content from the on-board display to be duplicated
(mirroring) to the output on the USB 3.0 Docking Station.
The screen resolution setting on the USB 3.0 Docking Station video output will match
the on-board display’s resolution. For example, if the on-board display’s resolution is
1024 x 768*32-bit, then the USB 3.0 Docking Station will use the same resolution.
“Set as Main Monitor” Display Mode
A unique feature to allow the USB 3.0 Docking Station to act as the main working
display. The USB 3.0 Docking Station will work as the main graphics adapter on the
system, while the on-board display will work as the extended display.
Please be advised that some display utilities and drivers that shipped with certain AGP
and built-in display adapters may prevent this option from working on some systems.
You may be able to disable the other utility program (usually found in the same tool
bar located on the bottom right hand corner) to make this function work properly.
“Off” Display Mode
This option disables the video output from the USB 3.0 Docking Station.
Screen Resolution
Select the desired video display resolution for the connected monitor in Extend Mode.
The default resolution setting is: 1024 x 768 * 32-bit.
Screen Rotation
4 options are available: 0°(Normal), 90° (Left), 180° (Upside-Down), 270° (Right) when
used with the Extended or Primary display modes. It is a useful function for some
rotatable display devices.
Normal
Upside-Down
Rotated Right
Rotated left
Instruction Manual
7
Notebook Monitor Off
Turns the monitor on the USB Docking Station to the main display and turns off the
screen of the laptop. NOTE: This function works only when one add-on monitor is
connected. This option will also only appear on laptop.
Optimize For Video (Windows Vista / and later)
Optimize video play back when using Windows Vista/ and later. Regular text may
appear blurry while this is enabled.
Fit to TV
When using Extended Mode, if the Windows Desktop screen is not completely visible
on the TV/Monitor, this option can be used to adjust the size of the Windows Desktop.
NOTE: This mode will only work while using Extended mode. If using Mirror mode, this
will automatically change the adapter to Extended mode. This mode cannot be used
at the same time as the Screen Rotation feature.
A red border will appear on the Extended screen that will show the size of the new
Windows Desktop. Use the horizontal and vertical + and - buttons to manually adjust
the size to properly fit the screen.
NOTE: Holding the CTRL key while making adjustments allow for finer control.
Instruction Manual
8
Supported Video Resolutions
Resolution
Refresh Rate
640 x 480
60/ 72/ 75/ 85 Hz
800 x 600
56/ 60/ 72/ 75/ 85 Hz
1024 x 768
60/ 70/ 75/ 85 Hz
1280 x 720
60 Hz
1280 x 768
60/ 75/ 85 Hz
1280 x 800
60 Hz
1280 x 1024
60/ 75 Hz
1366 x 768
60 Hz
1400 x 1050
60/ 75/ 85 Hz
1600 x 1200
60 Hz
1680 x 1050
60 Hz
1920 x 1080
60 Hz
1920 x 1200
60 Hz
2048 x 1152
60 Hz
Inferred Modes
Some modes in the DisplayLink GUI are shown with
[ ] around them. This occurs when connecting a
monitor with a preferred mode (native resolution)
higher than the maximum supported resolution of
the DisplayLink device. In cases where the preferred
resolution of the monitor cannot be supported,
lower resolutions of the same aspect ratio are
suggested in brackets. As these are inferred modes
from the preferred mode of the monitor, they are
not guaranteed to work with the display.
Instruction Manual
9
Troubleshooting
Minor display issues can generally be resolved by:
• Unplugging and re-plugging the DisplayLink device,
• Changing the display mode via the DisplayLink GUI or via Windows
Display Properties
Error Messages
Message
Insufficient system
resources exist to
complete the requested
service
The requested
allocation size was too
large
Incompatible Display
Driver
The system cannot write
to the specified device
Instruction Manual
Description
This can occur when entering extend mode with
low system resources. The PC does not have enough
memory (RAM) to start an extend display.
Close down any unused applications. The situation
may also be improved by rebooting the PC.
This can occur if trying to mirror a primary display
with a resolution above 2300x1700 (4:3) or 2600x1500
(16:9).
This message will appear if the primary graphics card
drivers installed are not WDDM compatible. Windows 7
is not designed to operate without WDDM drivers.
Download and install the latest Windows 7 (WDDM)
drivers for your primary graphics card.
This warning may be displayed in Windows XP after
changing the display mode several times (e.g. Extend/
Dock mode) from the DisplayLink GUI. If this happens,
detach and reattach the device to restore normal
operation.
10
Specifications
Host Interface
USB 3.0
Chipset
DisplayLink - DL-3900
Genesys - GL3520
Realtek - RTL8211E
Connectors
2 x 3.5 mm Mini-Jack (3 Position) Female
1 x DVI-D (25 pin) Female
1 x HDMI (19 pin) Female
1 x RJ-45 Female
1 x VGA (15 pin; High Density D-Sub)
3 x USB 3.0 type A Female
1 x USB 3.0 type B Female
Maximum Data Transfer Rate
USB 3.0: 5 Gbps
LAN: 2 Gbps (Full-Duplex)
Supported Standards
IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, USB 3.0
Supported Network Link Speeds
10/ 100/ 1000 Mbps
Ethernet Full Duplex Support
Yes
Auto MDIX
Yes
Maximum Video Resolution
2048 x 1152 (VGA)
1920x1200 (DVI-D)
1920x1080 (HDMI)
Audio Support
Yes (2-Channel Stereo, Mic)
Power Adapter
5V DC, 4000mA, Center Positive
Enclosure Material
Plastic
Operating Temperature
0°C to 40°C (32°F to 104°F)
Storage Temperature
-10°C to 60°C (14°F to 140°F)
Dimensions
263 x 87 x 34 mm
Weight
289g
Compatible Operating Systems
Windows® 8 / 8.1 (32/64bit), 7 (32/64), Vista
(32/64), XP SP3 (32), Mac OS® 10.6 and up
(Tested up to 10.9)
Instruction Manual
11
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commitment to
provide industry-leading solutions. If you ever need help with your product, visit
www.startech.com/support and access our comprehensive selection of online tools,
documentation, and downloads.
For the latest drivers/software, please visit www.startech.com/downloads
Warranty Information
This product is backed by a two year warranty.
In addition, StarTech.com warrants its products against defects in materials
and workmanship for the periods noted, following the initial date of purchase.
During this period, the products may be returned for repair, or replacement with
equivalent products at our discretion. The warranty covers parts and labor costs only.
StarTech.com does not warrant its products from defects or damages arising from
misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their
officers, directors, employees or agents) for any damages (whether direct or indirect,
special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business,
or any pecuniary loss, arising out of or related to the use of the product exceed the
actual price paid for the product. Some states do not allow the exclusion or limitation
of incidental or consequential damages. If such laws apply, the limitations or exclusions
contained in this statement may not apply to you.
Instruction Manual
12
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise.
StarTech.com is your one-stop source for every connectivity part you need. From
the latest technology to legacy products — and all the parts that bridge the old and
new — we can help you find the parts that connect your solutions.
We make it easy to locate the parts, and we quickly deliver them wherever they need
to go. Just talk to one of our tech advisors or visit our website. You’ll be connected to
the products you need in no time.
Visit www.startech.com for complete information on all StarTech.com products and
to access exclusive resources and time-saving tools.
StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology
parts. StarTech.com was founded in 1985 and has operations in the United States,
Canada, the United Kingdom and Taiwan servicing a worldwide market.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement