Untitled - Carlin Combustion Technology, Inc.

Untitled - Carlin Combustion Technology, Inc.
Carlin 99FRD, 100CRD & 102CRD Advanced Oil Burners
Features
Specifications
The 99FRD, 100CRD and 102CRD advanced oil
burners feature Carlin’s adjustable head assembly —
for unmatched fuel/air mixing, smooth light-offs and
quiet running.
Proven for years in the field and in extensive boiler and
furnace testing, these burners cover the range from
residential to semi-commercial, to meet your needs for
oil-burning applications.
Look at the features and options:
Easy adjustment and service
Only adjustments are the air band and the retention
ring, with Carlin’s unique Allen key setting method
Blower access cover allows full view of blower
compar tment
Burners use the same air handling parts for
each firing rate range
Compact design using standard components,
including Carlin electronic ignition and microprocessor primary controls. Optional oil line
heater and SVC oil valve also available.
Tapered electrode tip design doubles the life of
electrodes
Unmatched performance
Positive ignition, stable operation, and compact
flame
Insensitive to draft or moderate back-pressure
variations
Damper not required to maintain high seasonal
efficiencies
Excellent performance tested in appliances that
do not use refractory combustion chambers
Pressure augmenter in 99FRD increases static
pressure to 3.5 inches w.c. — for cleaner starts
and stops
Special notes
Input
99FRD ................................. 0.50
100CRD ............................... 0.50
102CRD (2⁵⁄₈” air cone) ........ 2.00
102CRD (3” air cone) ........... 3.00
to 3.00 GPH
to 2.25 GPH
to 3.50 GPH
to 4.50 GPH
The maximum firing rate shown is for natural draft at elevations up
to 2,000 feet above sea level. Reduce the rate for forced draft
firing as given in the burner manual (up to 21% reduction for
100CRD at 0.20 inches w.c. overfire pressure). For altitudes higher
than 2,000 feet, reduce capacity 4% per 1,000 feet above sea
level.
2. Burners ship standard with adjustable flange unless ordered for
specific OEM application. Special welded flange and required insertion depth if welded flange is required. Use welded flange when firing
into a positive-pressure combustion chamber.
3. All burners ship with single-stage fuel pumps unless optional twostage pump is specified.
Wiring
(typical, using 60200 primary)
Fuels
U. S. ........................................ No. 1 or No. 2 Fuel oil
Canada ............... No. 1 Stove oil or No. 2 Furnace oil
Electrical
Power ........................................ 120 VAC/60 HZ/1-PHASE
Limit circuit input (60200 primary) .......... 120 VAC/60 HZ
Current
99FRD .................................... Approximately 5.5 AMPS
100CRD ................................... Approximately 5.5 AMPS
102CRD ................................... Approximately 6.0 AMPS
Motor
99FRD .......................................... 1/6 HP, 3450 RPM
100CRD ......................................... 1/6 HP, 3450 RPM
102CRD ......................................... 1/6 HP, 3450 RPM
(Optional) Oil valve power ...................... 120 VAC/60 HZ
(Optional) Nozzle line heater .................. 120 VAC/60 HZ
Warning — For use only by a qualified service technician.
Ignition
Carlin Model 41000 solid state electronic ignitor
Ignition voltage ........................................ 14,000 VOLTS
UL Listed ............................................ (US & Canada)
S U P P O R T
1. Always disconnect power source before wiring to avoid electrical shock
or damage to the control. All wiring must comply with applicable codes
and ordinances.
2. Thermostat terminals (T–T) provide a current source. Never apply
external power to these terminals under any circumstances.
Agencies
T E C H
1. 99FRD burners ship with blank (closed) air shutters. The maximum
input with blank shutters is 2.25 GPH. For higher firing rates, order
with open air shutter (for range from 1.50 to 3.00 GPH).
H O T L I N E
3. Alarm terminals provide a 24 VAC-rated dry contact, suitable for use
with security/fire alarm systems such as Carlin SecureHeat™.
8 0 0 - 9 8 9 - 2 2 7 5
Carlin Combustion Technology, Inc.
70 Maple Street
East Longmeadow, MA 01028
e-mail us at: info@carlincombustion.com
© Copyright 2003 — Carlin Combustion Technology, Inc.
Phone 413–525–7700
Fax 413–525–8306
vist our website: www.carlincombustion.com
Carlin part number MN99102C Rev. 02/11/03
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising