Samsung Appliance Rfg293hars Quick Specs
quick start guide
English
RFG293HA
Product features
Surround Multi Flow
A center-positioned fan and
ducts with multiple flow
effluences provide uniform
cooling for each shelf and fresh
food compartment corners.
Secure Auto Close Door
System
• Secure Auto Close Door System
• Cool tight doors
• Energy saving
• Prevents condensation on fridge
doors
Twin Cooling System
The refrigerator and the freezer
have two evaporators. Given this
independent system, the freezer
and the refrigerator are cooled
individually and more efficiently.
Food odor from the refrigerator
does not affect food in the
freezer due to separate air flow
circulation.
Electronic control from
outside of Pantry Cover
The Cool Select Pantry is a full
width drawer with an adjustable
temperature control to help keep
food fresh longer.
QS Guide (AW2-ND)-EN.indd
1
Easy Handle System
• Ez-open Freezer Door
• Ergonomic Door Design
Super Extended Drawer
The upper drawer in the freezer
comes out automatically when
you open the freezer door and
can be pulled out all the way to
the Tilting Pocket.
2010.3.23
8:22:19 PM
The Installation Space
2 inches
3 3/4 inches
2 inches
Selecting the best location for the refrigerator
• A location with easy access to the water supply.
• A location without direct exposure to sunlight.
• A location with a leveled floor.
• A
location with enough space for the refrigerator doors to open easily.
• Allow sufficient space for air circulation of the internal cooling system.
If the refrigerator does not have enough space, the internal cooling system may not work properly.
If your refrigerator has an ice maker, allow extra space at the back for the water line connections.
When you install the refrigerator next to a fixed wall, minimum clearance is 3 ¾” (95mm) between the
refrigerator and wall to allow the door to swing open.
First thing! Make sure that you can easily move your Refrigerator to its final location by measuring doorways
(both width and height), thresholds, ceilings, stairways, etc.
The following chart details the exact height and depth of Samsung French Door Refrigerator.
Model
Depth
“A”
Width
“B”
Height
“C”
Overall
Height “D”
Depth
“E”
RFG293HA
32.91”
(83.6cm)
35.75”
(90.8cm)
68.66”
(174.4cm)
69.84”
(177.4cm)
35.63”
(90.5cm)
B
A
C
E
D
• A
llow clearance to the right, left, back and top when installing.
This will help reduce power consumption and keep your energy bills lower.
• D
o not install the refrigerator where the temperature will go below 50ºF
(10ºC).
• D
o not locate the refrigerator where it may become wet.
CAUTION
FLOORING
For proper installation, this refrigerator must be placed on a
leveled surface of hard material that is the same height as the
rest of the flooring. This surface should be strong enough to
support a fully loaded refrigerator, or approximately 328lbs
(150kg). To protect the finish of the flooring, cut a large section
of the cardboard carton and place under the refrigerator where
you are working. When moving a refrigerator, it is needed to
pull and push in the back-and-forth direction.
QS Guide (AW2-ND)-EN.indd
2
2010.3.23
8:22:34 PM
Operating your French Door Refrigerator
usinG tHE ContRoL PAnEL & DisPLAy
A
1
2
3
B
4
5
6
Ice off Button
Press the Ice Off button ( 1 ) , if you don’t want to make more ice. The icon (
stops making ice.
) will light up the Ice-Maker
In this case of following, it is recommended to stop making ices.
- There are enough ices in the ice bucket.
- You want to save on water and energy.
- Water does not supply to refrigerator.
CAUTION
If ice maker function is ON, and water line is not connected, there will be a water valve noise from
back of unit. Press the Ice Off button until Ice Off indicator ( ) illuminated.
If you want to fill the case ice cube to maximum capacity after installation, make sure to do the following
steps.
1. Check the display whether the Ice off light ( ) is ON or OFF. If the Ice off light is ON, press the
Ice off button ( 1 ).
2. A
llow your refrigerator to operate and cool down for 24 hours (or 1 full day). Waiting 24 hours will
allow your ice maker to cool properly.
CAUTION
• In case ice doesn’t come out, press the test button located on the right side of ice maker.
•D
o not press the test button continuously, when the tray is filled with ice or water. Water may
overflow or ice jamming may occur.
• Use only the ice maker provided with the refrigerator.
Check the
•T
he water supply to this refrigerator must only be installed/
water level
connected by a suitably qualified person and connect to a
protable water supply only.
• In order to operate the ice maker properly, water pressure of
20~125psi is required.
• Do not try to disassemble the ice maker.
Test button
QS Guide (AW2-ND)-EN.indd
3
2010.3.23
8:23:57 PM
Operating your French Door Refrigerator
usinG tHE ContRoL PAnEL & DisPLAy
Power Freeze Button
Press the Power Freeze button ( 2 ) if you want to speed up the time needed to freeze products in the
Freezer. The icon( ) will light up and the inside temperature of the Freezer will decrease for about two and
a half hours. When you have enough, just press the button again to cancel the Power Freezer mode.
If the Power Freeze mode is selected, a little of noise can be happen because of the continuous
operation of compressor.
Power Cool Button
Press the Power Cool button ( 5 ) if you want to speed up the time needed to cool products in the Fridge.
The icon( ) will light up and the inside temperature of the Fridge will decrease for about two and a half
hours. When you have enough, just press the button again to cancel the Power Cool mode.
If the Power Cool mode is selected, a little of noise can be happen because of the continuous
operation of Compressor.
Freezer Button
Press the Freezer button ( 3 ) repeatedly until the desired temperature is shown in the display ( A ).
Whenever you press the button, the temperature will move 2°F degrees each push and you can set the
temperature between 8°F and -8°F. Five seconds after the new temperature is set, the display will again
show the actual current freezer temperature until the new temperature is selected.
-2°F is recommended.
QS Guide (AW2-ND)-EN.indd
4
2010.3.23
8:24:0 PM
Fridge Button
Press the Fridge button ( 4 ) repeatedly until the desired temperature is shown in the display ( B ).
Whenever you press the button, the temperature will move 2°F degrees each push and you can set the
temperature between 46°F and 34°F. Five seconds after the new temperature is set, the display will again
show the actual current freezer temperature until the new temperature is selected.
38°F is recommended.
The temperature of the freezer, fridge of pantry room may rise when you open the doors too
frequently, or if a large amount of warm or hot food is place inside.
This may cause the digital display to blink. Once the Freezer and Refrigerator temperature return to
their normal set temperatures, the blinking will stop.
If the blinking continues, you may need to “reset” the Refrigerator. Try unplugging the appliance,
wait for around 10 minutes and then plug the power cord back in.
E.Saver Button
Press the E.Saver Button ( 6 ) for better energy efficiency. If E. Saver mode is ON, the button will light up
blue.
If condensation occurs on the doors, wipe the water drops and
turn E.Saving function.
Cooling Off Mode
This function is for store display refrigerators. It is not for customer use.
CAUTION
In Coolong Off Mode, the refrigerator works but doesn’t make cool air. To cancel this mode, press
the Power Freeze and Freezer buttons at the same time for 3 seconds until a “Ding-Dong” sound
is heard and the unit will now cool.
QS Guide (AW2-ND)-EN.indd
5
2010.3.23
8:24:4 PM
Operating your French Door Refrigerator
usinG tHE ContRoL PAnEL & DisPLAy
Filter
The Filter light ( ) lets you know when it is time to change your water filter cartridge. When
the filter indicator lights up red, it is time to change the filter. Changing the filter on time provides
you with the freshest, cleanest water from your refrigerator. Typically this happens about every 6
months.
• The Filter Indicator will be Blue when you purchase the new refrigerator.
•T
he Filter Indicator will be Pink when you have used your water filter for 270 gallons or 5 months.
• The Filter Indicator will be Red when you have used your water filter for 300 gallons or 6 months.
Depending on the condition of water and region, time to change the water filter can be
changed. So some area can be taken only two months until changing the new one.
How to change the water filter
1. Turn the water filter ( 1 ) about 1/4 turn, counter-clockwise.
2. Pull the water filter ( 1 ) from the case filter ( 2 ).
2
1
- T
o change the water filter more easily, shut off the water supply
valve.
2
- Sometimes, it is hard to disassemble the water filter because of
impurities in water.
3
In this case, put the grip of water filter and pull it hard.
- When you pull the water filter, a little of water can be leaked. It is
normal.
To minimize the water leak, keep the filter cartridge horizontal or down the grip when you pull it.
- In order to prevent overflow, empty the tray water filter ( 3 ).
And dry around of case filter ( 2 ).
3. Insert new one into the case filter ( 4 ).
4. Push and turn the water filter clockwise, until it locked.
4
QS Guide (AW2-ND)-EN.indd
6
2010.3.23
8:24:12 PM
- If you are in trouble of inserting the water filter as high pressure of
water, shut off the water supply valve.
- The locked symbol should be lined up with the indicator line.
5. A
fter above steps, press the “Fridge” and “Power Cool” button simultaneously for about 3
seconds to reset the water filter. The color of indicator ( ) will be changed to blue from red.
For a replacement water filter, you can visit your local home improvement center or contact the
Samsung Parts distributor.
Be sure the replacement water filter has the SAMSUNG logo on the box and on the water filter.
Link : http://www.samsungparts.com
QS Guide (AW2-ND)-EN.indd
7
2010.3.23
8:24:15 PM
Names and basic functions
Name of each component
➊
➐
➑
➒
➋
➓
➌
➍
➎
➏
1. Light
6. Tilting Pocket
11. Quick-Space Glass Shelf
2. Vertical Hinged Section
7. Door Closer
12. Cool Select PantryPLUS
3. Vegetable & Fruit Drawers
8. Dairy Compartment
13. Light
4. FZ Ice-Maker
9. Tempered glass shelves
14. Auto Pull Out Drawer
5. Ice Bucket
QS Guide (AW2-ND)-EN.indd
8
10. Door Bins
15. Freezer Drawer Bin
2010.3.23
8:25:39 PM
Troubleshooting
PROBLEM
SOLUTION
The refrigerator does not
work at all or it does not
chill sufficiently.
• Check that the power plug is properly connected.
• Check the set temperature on the digital display is warmer than freezer or fridge
inner temperature.
• Set the refrigerator colder.
• Is the refrigerator in direct sunlight or located near a heat source?
• Is the back of the Refrigerator too close to the wall and therefore keeping air from
circulating?
The food in the fridge is
frozen.
• Check the set temperature on the digital display is too low.
• Try setting it to a warmer temperature.
• Is the temperature in the room too low?
Set the refrigerator warmer.
• Did you store the food which is juicy in the coldest part of the refrigerator?
• Try moving those items on the other shelves in fridge instead of keeping them in the
Cool Select PantryPLUS.
You hear unusual noise or
sounds.
• Check that the refrigerator is level and stable.
• Is the back of the refrigerator too close to the wall and therefore keeping air from
circulating?
• Try locate the refrigerator keep away from the wall over 2 inches.
• Was anything dropped behind or under the refrigerator?
• A “ticking” sound is heard from inside the refrigerator. It is normal and occurs
because various accessories are contracting or expanding according to the
temperature of the refrigerator interior.
The cabinet-door sealing
area of the appliance is
hot and condensation is
occurring.
• Some heat is normal as anti-condensators are installed in the vertical hinged section
of the refrigerator to prevent condensation.
• Is the refrigerator door ajar? Condensation can occur when you leave the door open
for a long time.
• If a sound that hit something is heard from inside the refrigerator, It is normal. The
sound comes due to ice cubes rubbing in the bucket periodically.
Ice Maker is not producing
ice.
• Did you wait for 12 hours after installation of the water supply line before making ice?
• Is the water line connected and the shut-off valve opened?
• Did you manually stop the ice making function?
• Is the freezer temperature too warm? Try setting the freezer temperature lower.
You can hear water
bubbling in the refrigerator.
• This is normal. The bubbling comes from refrigerant circulating through the
refrigerator.
There is a bad smell in the
refrigerator.
• Check for spoiled food.
• Foods with strong odors(for example, fish) should be tightly covered.
• Clean out your freezer periodically and throw away any spoiled or suspicious food.
Frost forms on the walls of
the freezer.
• Is the air vent blocked? Remove any obstructions so air can circulate freely.
• Allow sufficient space between the foods stored for efficient air circulation.
• Is the freezer drawer closed properly?
Auto close system does
not work with the freezer
door.
• Is there an imbalance between the right and left parts of the door?
• Close and open the door smoothly 1~2 times. Then, the auto close system will be
worked well again.
• Try opening the door smoothly to avoid the unbalance between the right part and
the left part of the door.
QS Guide (AW2-ND)-EN.indd
9
2010.3.23
8:25:42 PM
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising