DG-GS4928F - Smartlink Network Systems Ltd

DG-GS4928F - Smartlink Network Systems Ltd
Datasheet
DG-GS4928F
Support 10Gb Ethernet
10Gb Ethernet which adopts full-duplex technology instead of
low-speed, half-duplex CSMA/CD protocol, is a big leap in the
evolution of Ethernet. 10Gb Ethernet can be deployed in star or
ring topologies. With 10Gb Ethernet, DG-GS4928F series switch
provide broad bandwidth and powerful processing capacity. It
is suitable for metropolitan networks and wide area networks.
Using DG-GS4928F series switch, users can simplify network
structures and reduce cost of network construction.
Networking Protocols
DG-GS4928F switch support 802.1d/w/s, 802.1Q, 802.1p,
802.3ad, 802.3x, GVRP, DHCP and SNTP etc. The switches also
support comprehensively the multicast protocols such as IGMP,
DVMRP and PIM. Moreover, DG-GS4928F series switch support
RIPv1/2, OSPF and IPv6. All these protocols supported enable
DG-GS4928F series switch to meet the requirements of
complex network constructions.
QoS
DG-GS4928F switch fully support DiffServ Module. Users can
specify a queue bandwidth on each port. WRR/SP/SWRR
scheduling is also supported. DG-GS4928F support the port
security. Users can deploy trusted CoS, DSCP, IP precedence and
port priority. User can also modify packets’ DSCP and COS
values. The traffic can be classified by port, VLAN, DSCP, IP
precedence and ACL table. User can also modify packets’ DSCP
and IP precedence values. Users can specify different
bandwidths for voice/data/video to customize different
qualities of service.
Strong Multicast
The DG-GS4928F series supports abundant multicast features.
The product supports rich L2 multicast features such as
IGMPv1/v2/v3,snooping and L3 multicast protocols such as
PIM-DM, PIM-SM, PIM-SSM even MSDP. As the rich application
experience, the product supports multicast Vlan Register
(MVR), multicast receiver/sender control and illegal multicast
source detect functions.
24 port SFP switch including 12 combo (SFP/Copper)
ports with 4 optional 10G uplink ports
S
DG-GS4928F
DIGISOL DG-GS4928F switch is 10Gb Ethernet routing switch. DG-GS4928F switch
is based on 10Gb switching technology. The switches fully support IPv6 with height
is only 1U.It is ideal for the Metro Ethernet market.They support strong IPv4/IPv6
routing, MPLS, comprehensive QoS, enhanced Vlan functions, classified
bandwidth control, multiple link aggregation, intelligent security control.
Advanced IPv6 and IPv4 Routing
The DIGISOL DG-GS4900F series supports hardware based IPv6
and IPv4 routing for maximum performance. It provides
seamless migration path from IPv4 to IPv6 for future network
upgrades and investment protection.
Technical Specification
Port
• 12 GE SFP ports
• 12 COMBO (SFP/GT)
• 2 slots and max 4 10GE
Performance
• Switching Capacity
• Throughput
• MAC Address
• VLAN Table
• ACL Table
• Routing Table
• L3 Interface
• VRF interface
• Port Queues
Features
• Forwarding
• Storage and Forwarding
IEEE 802.3(10Base-T)
IEEE802.3u(100Base-TX)
IEEE802.3z(1000BASE-X)
IEEE802.3ab (1000Base-T)
IEEE802.3ae (10GBase)
• Loopback interface
• 9k Jumbo Frame
• Port loopback detect
• LDP and LLDP-MED
• UDLD
- 128 Gbps
- 96Mpps
- Max 16 K
- Max 4K
- Max 4K
- Max 13K
- Max 1K
- Max 255
- 8
Product Features & Compliances
Ÿ
Support 10Gb Ethernet
Ÿ
Networking Protocols
Ÿ
QoS
Ÿ
Strong Multicast
Ÿ
Advanced IPv6 and IPv4 Routing
Datasheet
Technical Specification
• Support LACP 802.3ad, max 128 group trunk with max 8 ports
for each trunk,
• Support load balance
• IEEE802.1d (STP)
• IEEEE802.1W(RSTP)
• IEEEE802.1S(MSTP) with 48 instance
• Root Guard
• Bpdu Guard
• BPDU forwarding
• Support one to one or any to one mirror
• IGMP v1/v2/v3, IGMP v1/v2/v3 Snooping, IGMP Proxy
• ICMPv6, ND, ND snooping, MLDv1/v2, MLDv1/v2 snooping
• QinQ, GVRP, Broadcast / Multicast / Unicast Storm Control
• Port/ MAC/ IP segment/ Portocol/ Voice/ Private/ Vlan
support
• Multicast Vlan register/MVR for IPv4 and IPv6 service
• Support port-based 802.1Q
• MAC binding(Ipv4 /Ipv6), MAC filter, MAC limit
• Port binding(Ipv4 /Ipv6) and IP source guard
L3 Features
• IP Protocol(IP support both of IPv4 and Ipv6)
• Default Routing, Static Routing, Black hole route, VLSM and
CIDR,
• RIPv1/V2, OSPFv2, BGP4, support MD5 authentication LPM
Routing
• OSPFv3, BGP4+ support
• Policy based Routing(PBR) for IPv4 and IPv6
• VRRP, VRRP v3
• PPIM-DM, PIM-SM, PIM-SSM, MSDP
• Static Multicast route
• PIM-SM/DM/SSM for IPv6, 6 to 4 Tunnels , configured
Tunnels , ISATAP
• Multicast receive control
• Illegal multicast source detect
• Any cast RP for Ipv4 and Ipv6
• Support ECMP(?Equal Cost Multi-Path)with maxim 8 groups
• URPF for IPv4 and Ipv6
• Support BFD
• ARP guard, Local ARP proxy, Proxy ARP, ARP binding,
Gratuitous ARP, ARP limit
Tunnel
• Support manual configure IPv4/IPv6 tunnel
Support 6to4 tunnel
Support ISATAP tunnel
Support GRE tunnel
MPLS
• Support 255 VRF/VFI
• Support LDP
• L3 MPLS VPN
• Support MPLS QOS
QoS
• 8 hardware queues per port
• Support traffic classification based on IEEE 802.1p, ToS,
port and DiffServ
• Support SP, WRR.SWRR
• Support Traffic Shaping
• Support PRI Mark/Remark
ACL
• Support standard and extended ACL
• Support IP ACL and MAC ACL
• Support ACL based on source/destination IP, MAC, L3 IP,
TCP/UDP port number, IP PRI(DSCP, ToS, Precedence), Time
ACL- Enhanced
• Support time-based security auto-negotiation
• ACL rules can be configured to port, VLAN, VLAN routing
interfaces
• Can be used for QoS classification
Security
Datasheet
Technical Specification
• Switch engine CPU protection
• Key message priority: secure processing of key legal
messages
• Inspect illegal DHCP Server, Radius Serve, Trusted interfaces
Advanced LPM: filter “Bluster”, “zero day” and ”SQL
slammer warm”
• Support URPF, avoid IP address clone
• All the above technologies efficiently prevent various DOS
attack (e.g. ARP, Syn-flood, Smurf, ICMP attack), support
ARP monitoring, defense Worm, Bluster, check sweep and
raise alarm
Reliability and Redundancy Balance
• Support MSTP(802.1s)
• Support VRRP, LACP load balance
• MRPP – Multilayer Ring Protection Protocol
• Redundant power supply, power load balancing
• Support Firmware & Configure dual fault tolerance backup
DHCP
• Support DCHP Client, Relay, Snooping, Option 82
• DHCP Server for IPv4 and IPv6
• DHCP v6 and DHCP snooping V6
DNS
• DNS Client
• DNS proxy
Access security
• 802.1X
• Port, MAC, username based authentication
• Support account based on time length and traffic
• Support guest vlan and auto vlan
• Work with private client can manage P2P traffic
• MAC Based AAA(Client free access)
• PPPOE/PPPOE+ forwarding
AAA
• Support RADIUS for IPv4 and IPv6
• TACACS+ AAA
Stack and Cluster
• Support max 24 units cluster and managed by single IP
Configuration and Management
• Support CLI, Console, RS-232, Telnet (Ipv4/Ipv6),
SSH(Ipv4/Ipv6),SSL connection
• Support WEB based NMS
• Support SNMPv1/v2c/v3 for IPv4, SNMPv1/v2c for Ipv6
• Support MIB
• Support RMON 1, 2, 3, 9
• Sflow for IPv4 and Ipv6
• Support, RAM, Telnet, SSH Console, Syslog server
• Strict access control by ACL
• Access Switch through AAA or Local Authentication
• Support SNTP and NTP
• Setup time zone and Daylight Saving time
• Supervise abnormity of task, memory, CPU, stack, switch
chip, temperature and raise alarm
• Support IPFIX (IP Flow Information Export)
• Ping and trace route command
• Configuration file storage
• Command operation log
• Support FTP/TFTP server or client upgrade
• Support X-modem protocol transfer the file
Dimension(WHD) :
Relative humidity :
Operating Temprature :
Power :
Power Consumption :
415mm×44mm×325mm
5% ~ 90%, non-condensing
0 ~ 50*c
AC: 90- 264V, 47-63Hz
DC: -48V
130W
Ordering Information:
DG-GS4928F DIGISOL 10G IPv6 Routing Switch with 12* GE SFP and 12 Gigabit
Combo(SFP/GT)ports. 2 optional slot supporting upto 4 10G ports, AC+DC
redundant power supply
DG-SA-RPS650 PSU power 650W, Supply DC(-48V) and PoE
DIGISOL, the DIGISOL Logo are trademarks and/or registered trademarks of Smartlink Network Systems Ltd. Other trademarks,
product, service and company names mentioned are the property of their respective owners.Information is subject to change
without notice.The actual product appearance may differ from the one shown here.© 2012 Smartlink Network Systems Ltd.
All rights reserved.
Smartlink Network Systems Ltd.
DIGISOL House,
Plot No. 5, Kurla-Bandra Complex,
Santacruz (E), Mumbai-400098.
Tel : +91 22 3061 6666 / 2652 6696,
1800-209-3444
www.digisol.com
helpdesk@digisol.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising