For CF-30C and CF-30D Series

For CF-30C and CF-30D Series
Windows VistaTM Upgrade Step-by-Step Guide
For CF-30C and CF-30D Series
1
1 First.......................................................................................................................................................4
2 Upgrading to Windows Vista.............................................................................................................5
2-1 Steps for upgrading to Windows Vista......................................................................................5
2-2 Detail procedure for upgrading..................................................................................................6
Step 1 Preparations that are necessary for upgrading OS: Windows XP ...........................6
Step 2 Backup Important Data OS: Windows XP ..................................................................6
Step 3 Downloading the programs for upgrading and extracting to the hard drive OS
Windows XP .......................................................................................................................................6
Step 4 Update of BIOS OS: Windows XP / DOS .....................................................................7
Step 5 Uninstallation of Windows XP applications OS: Windows XP .................................9
(1) Uninstall the programs that should be uninstalled manually..............................................9
(3) Execute “Panasonic Applications Uninstaller”......................................................................11
Step 6 Upgrade to Windows Vista OS: Windows XP -> Windows Vista ........................... 12
Step 7 Installing Sound driver and update modules for Windows OS: Windows Vista . 16
Install Sound driver................................................................................................................. 17
(2) Install Update module for Windows....................................................................................... 17
Step 8 Install drivers for Windows Vista OS: Windows Vista ............................................ 17
(1)Install Intel(R) Matrix Storage Manager ............................................................................... 17
(2) Install Video Driver................................................................................................................... 17
(3) [Only for model with Touchscreen] Install Touch Screen driver..................................... 18
(4) Install LAN driver..................................................................................................................... 18
(5) [Only for model with Wireless LAN] Install Wireless LAN driver. ................................... 18
(6) Install Modem driver................................................................................................................ 18
(7)Install Panasonic Misc driver................................................................................................... 19
(8) Copy the file about SD.............................................................................................................. 19
(9)
........................................................................................................................................................... 19
(10)
........................................................... 19
Step 9 Windows Update OS: Windows Vista ........................................................................ 20
Step10 Install applications for Windows Vista OS: Windows Vista .................................. 20
(1) Install Panasonic Common Components .............................................................................. 20
(2) Install Battery Recalibration Utility...................................................................................... 20
(3) Install Hotkey Appendix .......................................................................................................... 21
(4) Install Hotkey Settings ............................................................................................................ 21
(5) Install Loupe Utility ................................................................................................................. 21
(6) Install PC Information Viewer................................................................................................ 21
(7) Only for model with Wireless LAN, Bluetooth or Wireless WAN Install Wireless Switch
Utility ............................................................................................................................................... 21
(8) [Only for model with Bluetooth] Install Bluetooth driver................................................... 22
(9) Install WinDVD......................................................................................................................... 22
3 Appendix............................................................................................................................................ 23
3-1 About Adobe Reader ............................................................................................................. 23
3-2 Other applications that you need to get the version for Windows Vista....................... 23
3-3 If you need to install XP again ............................................................................................ 23
2
3-4 SETUP utility ........................................................................................................................ 23
4 Restrictions........................................................................................................................................ 23
4-1 INDEMNIFICATION.............................................................................................................. 23
4-2 Revision history......................................................................................................................... 23
3
1 First
This document provides the steps for upgrading CF-30C and CF-30D Series from the Microsoft Windows® XP
Professional operating system to Windows Vista™. *
Before upgrading, please read carefully the support information such as restrictions after upgrading to Windows Vista
in "Windows Vista support evaluation information" in the address below.
(Only for models with Bluetooth, or Wireless LAN, or Wireless WAN) During upgrading, you will be prompted to turn
on the wireless switch. You must start upgrading where you are allowed to emit such radio.
In some cases, you should not upgrade to Windows Vista. Read all the documentation before you start upgrading your
OS.
Windows Vista™ Support and Upgrade Information
https://eww.pavc.panasonic.co.jp/pc/itn/support/vistainfo.html
We recommend that this document be printed beforehand.
*) Windows Vista™ is either a registered trademark or trademark of Microsoft Corporation in the United States
and/or other countries.
In this document, “Windows Vista™” is referred as “Windows Vista”.
4
2 Upgrading to Windows Vista
2-1 Steps for upgrading to Windows Vista
Please perform upgrading with the following turns by all means.
Step
Work contents
OS environment
Step 1
Preparations that are necessary for upgrading
Windows XP
Step 2
Backup Important data
Windows XP
Step 3
Downloading the programs for upgrading
Windows XP
and extracting to the hard drive
Step 4
Update of BIOS
Windows XP / DOS
Step 5
Uninstallation of Windows XP applications
Windows XP
Step 6
Upgrade to Windows Vista
Windows XP -> Windows Vista
Step 7
Installation of update modules for Windows Vista
Windows Vista
Step 8
Installation the drivers for Windows Vista
Windows Vista
Step 9
Windows Update
Windows Vista
Step10
Installation of the applications for Windows Vista
Windows Vista
Detail procedure for each step is described in 2-2.
The procedure described in this guide introduces the update steps for preinstalled application and drivers.
•
[Only for model with Wireless LAN]
Caution
Intel® PROSet for Windows Vista is not available.
The following functions are not supported on Windows Vista.
EAP-MD5
EAP-SIM
Pre-Logon Connect
EAP-TTLS
CCX
Persistent Connect
CKIP
LEAP
EAP-FAST
EAP-PEAP-GTC
CCKM
If you need to use these functions you should not upgrade to Windows Vista.
•
[Only for model with Smart Card Reader]
Caution
Gemplus Smartcard reader driver for Windows Vista is not available now.
If you would like to use SmartCard, do not upgrade your PC to Windows Vista until the driver for
Windows Vista is released..
If you upgrade to Windows Vista and use SmartCard reader, Bluescreen may occur.
Caution
Infineon TPM Professional Package for Windows Vista is not available now.
If you would like to use this program, do not upgrade your PC to Windows Vista until Infineon TPM
Professional Package for Windows Vista is released. Infineon TPM Professional Package for Windows
Vista will be uploaded on the Support information Home Page.
[Only for model with Wireless WAN]
5
Caution
Wireless WAN driver for Windows Vista is not available now.
If you would like to use the wirwless WAN, do not upgrade your PC to Windows Vista.
[for internal Combo or Super Multi drive users only]
Caution
The CD/DVD writing application is not available now.
If you would like to use this program, do not upgrade your PC to Windows Vista.
2-2 Detail procedure for upgrading
All of the steps (Download the upgrade programs, extracting files, and installing
the drivers and applications) should be done by the same administrator account.
Step 1 Preparations that are necessary for upgrading OS: Windows XP
Prepare following items before upgrading.
•
AC Adaptor Connect to your PC when upgrading.
•
Battery Pack Insert to your PC when upgrading.
•
USB Floppy Drive (CF-VFDU03: for BIOS updating.)
•
2HD Floppy Disk (For BIOS updating.)
•
Upgrade or retail DVD-ROM of Windows Vista™ Business or Ultimate(“SETUP DVD”)
•
Product Recovery DVD-ROM for your PC
•
Additional RAM module (Total 1 gigabytes (GB) of RAM or more is required.)
•
Information for Windows Vista about the applications that you installed to this PC and the peripherals you are
using for your PC.
Step 2 Backup Important Data OS: Windows XP
You should back up files that you created in the hard drive to a safe location (to the external media, external hard
drive, memory card, re-writable DVD and so on), before upgrading to Windows Vista.
Some applications will lose its settings by upgrading to Windows Vista. Please write down the necessary settings
before upgrading. And set the necessary setting again after setup Windows Vista and the applications for Windows
Vista.
Step 3 Downloading the programs for upgrading and extracting to the hard drive OS Windows XP
Download the update programs for your PC from the Support Web, and save them to the hard drive or
external media (e.g. external hard drive, memory card, rewritable DVD and so on).
The files are different depending on the model (Refer the following table.).
Please download the files of the corresponding model on the download page of each model.
Model name
CF-30C, D Series
Update programs *)
for BIOS
for drivers and applications
bios_30_1_r070027(.exe)
viup1_30_1_h070042(.exe)
6
bios_30_1_r060215B(.ex
(for internal Combo or Super Multi drive users only)
e)
viup_windvd_30_d061246(.exe)
(Only for models with touchscreen) vi_tscreen_30_d070150 (.exe)
(Only for models with bluetooth) vi_bluetooth_30_d070128 (.exe)
(Only for models with fingerprint) vi_fngprint_30_d061083 (.exe)
*) File name « bios_30_1_r070027(.exe) » is displayed as bios_30_1_r070027 without file extension and displayed
as bios_30_1_r070027.exe with file extension on Windows Explorer; all other files as well.
Extracts all of the downloaded files according to the following procedure.
(1) Double-click the downloaded file. (bios_30_1_r060215B(.exe) is required only when you need install
Windows XP again, so do not double-click this file now.)
(2) When the license agreement appears, read carefully the license agreements, and then click [Yes(Y)].
(3) When the [Destination Location] screen appears. You don’t need to change from default destination.
Enter the folder on the hard drive of the PC when you change the destination of extracting BIOS update
program.
Default destination for BIOS Update program is [c:\upbios] and for the Driver, application program, the
default destination is [c:\VistaUp].
Click [OK].
If you extract more than one update program for Driver and Application, the message
[c:\VistaUp already exists. …] may appear. Click [OK].
(4) Wait up to 30 seconds, then the extracting finishes.
About the update program for Driver and application, the message [Unpacking of files
completed.] appears when extracting finishes. Click [OK].
Download GLAN driver
You should update to new Marvell GLAN driver downloaded from the following WEB site
and update it.
1.
Access to http://www.marvell.com/drivers/
2.
Search the newest driver and download it.
Select [PC Connectivity] in “Product category”, [Yukon] in “Product Family”, and [Vista x86] in
“Platform” and click [Submit].
3.
Unzip the driver and store it on C:\VistaUp\drivers\lan.
If you use Windows Vista Inbox driver, Bluescreen may occur.
Step 4 Update of BIOS OS: Windows XP / DOS
1)
Save the settings of your computer
(1) Restart (or turn on) the computer.
(2) Enter the setup utility by pressing "F2" while "Panasonic" boot screen is displayed.
If password is set, enter your supervisor password.
(3) Take notes of the necessary settings. All settings will be cleared after update of BIOS.
(4) Clear the Supervisor Password at “Security” menu of the setup utility.
2)
Check the BIOS version in your computer.
7
(1) In the "Information" menu, check the BIOS version at the "BIOS" item.
If the BIOS version is same as below, you do not need to update it.
Current version of BIOS and the version of Updated BIOS is :
BIOS version (Before)
BIOS version (After)
V1.00L14
V1.01L14
(2) Press “F9” and “Enter”, press "F10", and press "Enter" to restart your computer.
3)
Make “Update Disk”
Prepare a 2HD blank-floppy disk in order to make “Update Disk”.
(1) Log on to Windows with administrator authority.
(2) Connect a USB floppy disk drive and insert a 2HD blank-floppy disk in the FDD.
(3) Format the floppy disk (be sure make it bootable) (click [start] – [My computer], right click [3
1/2 Floppy (A:)], select [Format…], check [Create an MD-DOS startup disk], then click [Start].)
(4) Delete these files in the floppy disk.
All files with file name starting with “KEY” (e.g. KEYB(.COM) )
All files with file name starting with “EGA” (e.g. EGA(.CPI) )
(5) Copy c:\upbios\bu301v14(.exe) onto the floppy disk.
(6) Shutdown Windows.
(7) Eject the “Update Disk” from the FDD and set the protect slider of it to protect the data.
(8) Set the “Update Disk” back to FDD.
CAUTION
The "Update Disk" can be used on the specified model of CF-30 series. Do not use it on other computers.
4)
Update BIOS
IMPORTANT
Before updating the BIOS, connect the AC adaptor, insert the battery pack and the floppy disk drive
correctly, and confirm any peripheral (e.g. PC card) except the floppy disk drive is NOT connected.
(1) Turn on your computer from the floppy disk.
(2) Type BU301V14 <ENTER>
(3) Follow the on-screen instructions.
(4) Your machine will turn off after BIOS has been updated.
(5) Remove the USB FDD from your computer.
CAUTION
Do not touch power switch during the BIOS update. It may cause malfunction.
5)
Restore the settings of your PC
Restore the settings which are noted in “1) Save the settings of your computer”.
8
(1) Turn on the computer.
(2) The following message will be displayed.
“ERROR
0251: System CMOS checksum bad – Default configuration used”
(3) Press “F2”, enter the setup utility.
(4) Press “F9”, and select “Yes” and “Enter” to set default.
(5) Set “System Time” and “System Date” at “Main” menu of the setup utility.
(6) Set Supervisor Password or User Password, if necessary.
(7) Restore the necessary settings.
(Only for models with GPS) Set “GPS” in “Advanced” menu to “Disable”.
(Only for models with Wireless WAN) Set “Wireless WAN” in “Advanced” menu to “Disable”.
(8) Press "F10", and press "Enter".
Step 5 Uninstallation of Windows XP applications OS: Windows XP
(Models with touch screen) You cannot use touch screen until Windows Vista and the driver is
installed properly.
Uninstall the programs that do not work on Windows Vista environment, and the programs that cause the problems
for upgrading to Windows Vista.
(1) Uninstall the programs that should be uninstalled manually.
Some applications installed on the Windows XP environment may cause the trouble when and after upgrading.
Uninstall these programs manually before setup Windows Vista.
Following applications preinstalled on CF-30 Series should be uninstalled.
•
Infineon TPM Professional Package
Security setting utility for TPM Chip.
If you upgrade your PC to Windows Vista without uninstalling this program, the setup of Windows Vista doesn’t
proceed properly and setup doesn’t finish. You should uninstall it before upgrading to Windows Vista.
1) Select
Control Panel - Add or Remove Programs -[Infineon TPM Professional Package]
2) Click [Change/Remove], and follow the onscreen instructions.
3) If [Infineon Security Platform Setup tool] window is open, click [OK].
•
If you upgrade your PC to Windows Vista without uninstalling this program, the setup of Windows Vista doesn’t
proceed properly and setup doesn’t finish.
You should Re-enroll your fingerprints if you used "Advanced Security" with TPM and uninstall it before
upgrading to Windows Vista.
If you forgot the Windows logon password for the administrator account, please change the password at
[Control Panel] – [User Accounts] – [Change your Windows password] screen before uninstalling Protector
Suite QL.
Re-enroll your fingerprints if you used "Advanced Security" with TPM
a) Click [Start] – [All Programs] – [Protector Suite QL] – [Control Center]
9
b) Click [Fingerprints] – [Enroll or Edit Fingerprints].
c) At [User Enrollment] screen, click [Next].
d) At [Verify] screen, swipe your finger or enter Windows password, and then click [Next >]
e) Uncheck [Run interactive tutorial], and click [Next] - [Next] - [Next].
f) At [Advanced Security] screen, uncheck [Enable Advanced Security for the current user],
and then click [Next>].
g) At [Finalization] screen, click [Finish].
h) Close [Protector Suite Software] window.
a) Select [Control Panel] - [Add or Remove Programs] - [
.
b) Click [Change], select [Remove], and click [Next].
c) Select [
] and click [Next].
d) Click [Next].
e) When the message [
•
[Only for model with Touchscreen] Fujitsu Touch Panel(USB)
This driver doesn’t work properly. So please uninstall the following procedure.
1) Select [Control Panel] - [Add or Remove Programs] - [Fujitsu Touch Panel(USB)]
2) Click [Change/Remove].
3) Push [Yes] button for [Remove Fujitsu Touch Panel(USB) from your system?] window.
4) Click [OK] button for [Fujitsu Touch Panel(USB) was successfully removed.]
5) Restart Windows.
•
[Only for model with Wireless WAN] Wireless WAN driver
1) This driver doesn’t work properly. So please uninstall the next procedure.
2) Select Control Panel - Add or Remove Programs - appropriate driver
3) Click [Remove] or [Change/Remove] and follow the instruction.
•
[for internal Combo or Super Multi drive users only] Roxio
1) This application doesn’t work properly. So please uninstall the next procedure.
2) Select Control Panel - Add or Remove Programs - [Roxio Easy Media Creator 7 Basic Edition]
3) Click [Remove].
4) Click [Yes] for [Are you sure you want to remove …] window.
•
Recover Pro
1) This application doesn’t work properly. So please uninstall the next procedure.
2) Select Control Panel - Add or Remove Programs - [Phoenix Recover Pro 6]
3) Click [Change/Remove].
4) Click [OK ]for [[Are you sure you want to completely remove …] window and follow the on-screen instruction.
5) Restart Windows.
10
* After you uninstalled all applications that are necessary to uninstall, restart Windows.
(3) Execute “Panasonic Applications Uninstaller”.
This program uninstalls pre-installed Panasonic Applications and other drivers automatically.
Before uninstalling some applications, you should turn on the wireless switch. If the switch in
your computer is set to off, turn it on now.
Click [Start - [Run], enter [C:\VistaUp\PSUninstall.exe], and click [OK].
If [Please, close all applications and windows except for this utility.] appears, close all working applications, and
then click [OK].
The main window for [Panasonic Applications Uninstaller] appears.
At the message [Be sure to do the following before clicking NEXT> ], confirm the messages and do the
necessary preparation, and click [Next>].
(1) Confirm [Wireless LAN is ON] by checking Wireless Switch Utility on the Task Bar,
(2) Double-click the PROSet icon on the task bar, and uncheck all the boxes in the
“Notifications” in [Tools] – [Application Settings …]. (The instruction on screen may be different.
Ignore the on-screen instruction and follow this step)
(3) close the [Intel(R) PROSet/Wireless].
(4) close the resident applications that open windows on the desktop.
When the message [Once started, you can’t stop the auto uninstall process, are you sure you want to start the
auto uninstall process ] appears, click [Yes].
11
When the re-confirmation message appears, click [OK].
When [The auto uninstall process is working.] appears, automatic uninstallation is in progress.
Do not touch anything, including the keyboard, the touch pad, or the touchscreen until the uninstall process is
completed.
At the confirmation message [The auto unistall process is completed,...Do you want to restart your computer
now?], click [Yes].
Windows restarts. If the [Found New Hardware Wizard] screen appears, click [Cancel].
Execute [Panasonic Applications Uninstaller] by repeat 2) - 3).
If the message [There are no applications to be uninstalled] appears, click [OK].
If an error occurs during uninstallation or windows reboots before the program completes all of uninstallation,
these programs are listed on the window. Then retry from 4) until the message [There are no applications to be
uninstalled] appears.
11) If the [Found New Hardware Wizard] screen appears, click [Cancel].
Step 6 Upgrade to Windows Vista OS: Windows XP -> Windows Vista
Keep following conditions until all of the procedure finishes.
- The AC adaptor is connected and the fully charged battery pack is inserted.
- Any peripheral (if not described in this procedure to connect it) is not connected.
- The LAN cable or the Modem Cable is not connected.
- The LAN, Wireless LAN and Modem connections are keep disconnected until [Step 9 Windows Update].
(Only for models with touch screen) Touch screen may work improperly. Do not use it until installing the driver and
calibrating the touch screen.
Turn off the wireless switch.
Insert the Windows Vista Setup DVD to the DVD drive.
[Install Windows] screen appears automatically.
12
If the autorun program does not open the [Install Windows screen], click [Start] – [Computer] and browse to the
root folder of the DVD and double click [setup(.exe)]
At [Install Windows] screen, click [Install now].
At [Get important updates for installation] Window, click Do not get the latest updates for installation .
At [Type your product key for activation] window, input the product key written on the disc holder inside the
Windows package, then click [Next .
13
At [Please read the license terms] window, carefully read the license terms and add a check mark for [I accept
the license terms], and then click [Next].
At [Which type of installation do you want?] window, click [Upgrade] (recommended) to perform an upgrade
to your existing installation of Windows.
[Checking compatibility...] window appears.
If the message [Potential issues were detected with installed applications/devices] appears, click [Next].
14
<Additional Information>
If you click the link [Click here for more information], the detail information about the applications or drivers
which the setup program for Windows Vista detects the potential problems.
Following programs may appear, but you don’t need to uninstall them.
Windows Messenger 5.1
<Caution>
If the message [You must make the following changes before installing Windows] appears
at the [Compatibility Report] screen, you cannot proceed setup until you uninstall it before setup.
If this message appears, cancel the setup and uninstall the all of displayed programs, and then
start setup again from the procedure #(1).
The message [Upgrading Windows...] appears and starts upgrading.
15
It takes about 1 or 2 hours for upgrading and restart two or three times. You will not be prompted to input any
data, unless you have set the setup password.
When the message [Help protect Windows automatically] appears, click [Use recommended settings .
At the [Review your time and date settings] screen, confirm time zone and set if needed.
Confirm date and time, set them if needed, and then click Next .
When the message [Thank you] appears, eject the Setup DVD-ROM form the DVD drive, and click [Start].
Windows checks the system performance. Wait for a while until the process is complete.
At the logon Screen, you should log on as the administrator account who extracted the upgrade
programs.
If the existing account is only one and password is not set, the logon screen doesn’t appear.
Desktop for Windows Vista appears.
after the desktop appears, It takes for a while until the initial settings finishes.
Do not touch the keyboard and the touchpad until the HDD access completely stops.
(For models with touch screen) Do not use touch screen until it is correctly calibrated.
If the [Found New Hardware Wizard] screen appears, click [Cancel].
Step 7 Installing Sound driver and update modules for Windows OS: Windows Vista
16
Install Sound driver
Click [Start]
– [Computer] and browse [C:\VistaUp\drivers\sound] folder.
Double-click setup(.exe)
displayed [Application] as [Type])
At the [User Account Control] screen, click [Continue].
When [Welcome to the InstallShield Wizard …] appears, click [Next>].
Installation of the driver starts.
When the message [InstallShield Wizard Complete] appears, click [Finish].
(2) Install Update module for Windows
Click Start - Computer , and then browse [C:\VistaUp\msupdate\q929685] folder.
Double-click Windows6.0-KB929685-x86(.msu) (displayed [Microsoft Update Standalone Package] as
[Type]).
At the [User Account Control] screen, click [Continue].
At the [Windows Update Standalone Installer screen, Click [OK].
If the message [Installation complete] appears, click [Restart Now].
Windows restarts.
Step 8 Install drivers for Windows Vista OS: Windows Vista
(1)Install Intel(R) Matrix Storage Manager
1)
Click [Start] – [Computer] and browse [C:\VistaUp\drivers\ahci] folder.
2)
Double-click setup(.exe). (displayed [Application] as [Type])
3)
At the [User Account Control] screen, click [Continue].
At the [Welcome to the setup for the Intel(R) Matrix Storage Manager.] screen, click [Next].
When the message [Warning! Please read following information], click [Next].
At the [License Agreement] screen, read the License Agreement carefully, and click Yes .
At the [Readme File Information] screen, click [Next].
When the message [The setup for the Intel(R) Matrix Storage Manager is complete] appears,
add the check mark to [Yes, I want to restart my computer now.] and click [Finish].
Windows restarts.
(2) Install Video Driver
Click [Start] – [Computer], and then browse [C:\VistaUp\drivers\video] folder
Double-click setup(.exe).
At [User Account Control] screen, click [Allow].
When the message [Welcome to the setup] appears, click [Next].
At the [License Agreement] screen, read carefully the license agreement, and then click [Yes].
At the [Readme File Information] screen, click [Next]. Your screen may blink several times.
When the message [Installation has completed.] appears, click [Next].
When the message [The setup of Intel(R) Graphics Media Accelerator Driver is complete] appears, select [Yes,
I want to restart this computer now.] and click [Finish].
When restarting, System performance evaluation tool for Windows Vista may automatically execute. Wait until
the process finishes.
9) After the PC restarts, browse [C:\VistaUp\drivers\video] folder again.
a) Right-click intelVGA(.bat)
displayed [Windows Batch File] as [Type]) and select [Run as
17
administrator].
b) At the [User Account Control] screen, click [Continue].
10) Click [Start] - [Control Panel] - [Appearance and Personalization] - [Adjust screen resolution],
change the desired display resolution, and click [OK]. (Do not select 16 bit in [Colors].)
(3) [Only for model with Touchscreen] Install Touch Screen driver
1) Click
Start - [Computer], and then browse [C:\VistaUp\drivers\tscreen] folder.
2) Double-click TPSetUp(.exe).
3) At the [User Account Contorol] screen, click [Allow].
4) At the [FCL USB Pen Tablet Setup] window, click [Yes].
5) When the message [The installation is now complete.] appears, click [OK].
6) Calibrate your touch screen by [Start] – [Control panel] – [Additional Options] – [Tablet Calibration].
Each user account should calibrate it.
(4) Install LAN driver
Click [Start] – [Control Panel] – [System and Maintenance].
Click Device Manager].
When the message User Account Control appears, click Continue
Double-click [Network Adapters]
Right-click [Marvell Yukon 88E8055 PCI-E Gigabit Ethernet Controller].
Click [Update Driver Software…]
Click [Browse my computer for driver software]
When the message [Browse for driver software on your computer] appears, enter [c:\VistaUp\Drivers\LAN]
When the message [Windows has successfully Updated your driver software] appears, click [Close].
(5) [Only for model with Wireless LAN] Install Wireless LAN driver.
Remember: You should not turn on the wireless switch yet.
Click [Start] – [Computer], and browse [C:\VistaUp\drivers\wlan\Drivers] folder.
Double-click iProDifX(.exe).
displayed [Application] as [Type])
At the [User Account Control] screen, click [Continue].
[Intel(R) PRO/Wireless driver installer] screen appears and the driver installation starts.
The [Intel(R) PRO/Wireless driver installer] will close automatically after a few minutes.
(6) Install Modem driver
Click [Start] – [Computer] and browse [C:\VistaUp\drivers\modem] folder.
Double-click HXFsetup(.exe).
At the [User Account Control] screen, click [Allow].
Wait about 1 (one ) minute. There is no message of ongoing and end of installation.
18
(7)Install Panasonic Misc driver
Click [Start] – [Computer], and browse [C:\VistaUp\miscinst] folder.
Double-click setup(.exe)
displayed [Application] as [Type])
At the [User Account Control] screen, click [Continue].
When the message [Welcome to the InstallShield …] appears, click [Next>].
Installation of the driver starts.
When the message [InstallShield Wizard Complete] appears, click [Finish].
(8) Copy the file about SD
Click [Start] – [Computer], and browse [C:\VistaUp\drivers\sd] folder.
Right-click sdpabus(.bat)
displayed [Windows Batch File] as [Type]), and select [Run as administrator].
At the [User Account Control] screen, click [Continue].
Confirm the message [1 file(s) copied.] appears in the command prompt window, and push any key. Then the
window closes.
(9)
Click [Start] – [Control Panel] – [System and Maintenance] and click [Device Manager].
At the [User Account Control] screen, click [Continue].
Double-click [Biometric] - [TouchChip Fingerprint Coprcessor].
Click [Driver] - [Update Driver…].
Click [Browse my computer for driver software].
Enter [C:\VistaUp\drivers\fngprint] in [Search for driver software in this location] and click [Next>].
When the message [Windows has successfully updated your driver software] appears, click [Close].
Close [TouchChip Fingerprint Coprocessor Properties], close Device Manager, and then restart Windows
by clicking [Start -
and select [Restart].
After restarting, click [Start - [Computer] and browse [C:\VistaUp\drivers\fngprint] folder.
Double-click fngprint(.bat)
At the[User Account Control] screen, click [Continue].
When the message [Are you sure you want to continue ] appears, click Yes appears, click OK
At the [User Account Control] screen, click [Continue].
When the message [Welcome to the Protector Suite QL 5.6 Installation Wizard] appears, click [Next]
Click [Next], [Next] Installation of the driver starts.
When the message [Protector Suite QL 5.6 has been successfully installed.] appears, click [Finish]
When the message [You must restart your system for the configuration changes made to Protector Suite QL
5.6 to take effect. …] appears, click [Yes].
After restart Windows, do necessary settings.
* When you finish installing all of the drivers, click [Start (10)
19
and select [Restart].
and select [Restart].
Restart your computer by clicking [Start Press [F2] at Panasonic boot screen.
Set [GPS] to [Auto] in [Advanced] menu.
Press [F10] and [ENTER].
In Windows, the cursor might move irregularly; try to restart your computer by clicking [Start -
and
select [Restart] in anyway.
Press [F2] at Panasonic boot screen.
Set [GPS] to [Disable] in [Advanced] menu.
Press [F10] and [ENTER].
In Windows, click [Start] – [Computer], and browse [C:\VistaUp\gps] folder.
Double click [GPSVista(.reg)].
At the [User Account Control] screen, click [Continue].
At the [Registry Editor] screen, click [Yes].
At the [Registry Editor] screen, click [OK].
and select [Restart].
Restart your computer by clicking [Start Press [F2] at Panasonic boot screen.
Set [GPS] to [Auto] in [Advanced] menu.
Press [F10] and [ENTER].
Step 9 Windows Update OS: Windows Vista
Do settings for Internet connection, connect a LAN cable, and execute Windows Update.
Click [Start] – [All Programs] – [Windows Update].
If the message [Download and install updates for your computer] appears, click [Install updates]. If not, click the
link [Check for updates].
Follow the displayed instructions.
Step10 Install applications for Windows Vista OS: Windows Vista
Caution: Panasonic Common Components should be installed in the beginning.
(1) Install Panasonic Common Components
Click[Start] - [Computer , and then browse [C:\VistaUp\pcommon] folder.
Double-click setup(.exe) (displayed [Application] as [Type]).
At the [User Account Control] screen, click [Continue].
At the [Welcome to the InstallShield Wizard …] screen, Click
Next> .
Installation of the Application starts.
When the message [InstallShield Wizard Complete] appears, click [Finish]
(2) Install Battery Recalibration Utility
Click [Start] – [Computer], and then browse [C:\VistaUp\brecal] folder.
Double-click setup(.exe) (displayed [Application] as [Type]).
At the [User Account Control] screen, click [Continue].
At the [Welcome to the InstallShield Wizard] screen, Click
20
Next> .
Installation of the Application starts.
At the [InstallShield Wizard Complete] screen, select [No, I will restart my computer later.] and then click
[Finish].
(3) Install Hotkey Appendix
Click [Start] – [Computer], and then browse [C:\VistaUp\hkeyapp] folder.
Double-click setup(.exe) (displayed [Application] as [Type]).
At the [User Account Control] screen, click [Continue].
At the [Welcome to the InstallShield Wizard …]screen, Click
Next> .
At the [Ready to Install the Program] screen, Click [Install].
Installation of the Application starts.
At the [InstallShield Wizard Complete] screen, select No, I will restart my computer later.
and then click
Finish .
(4) Install Hotkey Settings
Click [Start] – [Computer], and then browse [C:\VistaUp\hkeyset] folder.
Double-click setup(.exe) (displayed [Application] as [Type]).
At the [User Account Control] screen, click [Continue].
At the [Welcome to the InstallShield Wizard …] screen, Click
Next> .
Installation of the Application starts.
When the message [InstallShield Wizard Complete] appears, click [Finish].
(5) Install Loupe Utility
Click [Start] – [Computer], and then browse [C:\VistaUp\loupe] folder.
Double-click setup(.exe) (displayed [Application] as [Type]).
At the [User Account Control] screen, click [Continue].
At the [Welcome to the InstallShield Wizard …] screen, Click
At the [Ready to Install the Program] screen, Click
Next> .
Install .
Installation of the Application starts.
When the message [InstallShield Wizard Complete] appears, click [Finish].
(6) Install PC Information Viewer
Click [Start] – [Computer], and then browse [C:\VistaUp\pcinfo] folder.
Double-click setup(.exe) (displayed [Application] as [Type]).
At the [User Account Control] screen, click [Continue].
At the [Welcome to the InstallShield Wizard …] screen, Click
At the [Ready to Install the Program] screen, Click
Next> .
Install .
Installation of the Application starts.
At the [InstallShield Wizard Complete] screen, select No, I will restart my computer later.
Finish .
(7) Only for model with Wireless LAN, Bluetooth or Wireless WAN Install Wireless Switch Utility
Remember: You should not turn on the wireless switch yet.
21
and then click
Click [Start] – [Computer], and then browse [C:\VistaUp\wswitch] folder.
Double-click setup(.exe) (displayed [Application] as [Type]).
At the [User Account Control] screen, click [Continue].
At the [Welcome to the InstallShield Wizard …] screen, Click
At the [Ready to Install the Program] screen, Click
Next> .
Install .
Installation of the Application starts.
At the [InstallShield Wizard Complete] screen, select Yes, I want to restart my computer now.
and then click
[Finish].
Windows restarts
(US only) (Only for model with wireless LAN) Click Wireless switch utility icon
and click [802.11a
Disabled]. At the [User Account Control] screen, click [Continue].
(8) [Only for model with Bluetooth] Install Bluetooth driver
Turn on the wireless switch now.
1)
Click [Cancel] at [Found New Hardware] and click [Start] - [Computer] and browse [C:\VistaUp\drivers\bluet]
folder.
2)
Double-click setup(.exe) (displayed [Application] as [Type]).
3)
At the [User Account Control] screen, click [Continue].
4)
When the message [Welcome to the InstallShield Wizard…] appears, click [Next].
5)
At the [License Agreement] screen, read carefully the license agreement, select [I accept the terms in the
License agreement], and click [Next>].
6)
When the message [Ready to Install the Program] appears, click [Install].
During the installation, other window opens. Do nothing and wait a while.
7)
If the message [Please plug in the Bluetooth device and click OK button], click [cancel].
When the message [InstallShield Wizard Completed] appears, click [Finish].
When the message [You must restart your system…] appears, click [Yes].
Windows restarts.
If [Automatic Registration] screen appears, check [Don’t show this window next time] and close the window.
You may turn off the wireless switch now, if you want.
(9) Install WinDVD
Click [Start] – [Computer], and then browse [C:\VistaUp\windvd] folder.
Double-click setup(.exe) (displayed [Application] as [Type]).
At the [User Account Control] screen, click [Allow].
At the [Welcome to WinDVD Setup] screen, Click [Next>].
At the [License Agreement] screen, read the license agreement carefully, and then click [Yes].
When the message [Choose Destination Location] appears, set the destination folder, and then click [Next>].
At the [Select Program Folder] screen, click [Next>].
At the [File Types Association] screen, confirm the check mark for the DVD Video and Movie File, and then
22
click [Next>].
At the [Setup Complete] screen, click [Finish].
* Finally, restart your PC.
3 Appendix
3-1 About Adobe Reader
You can use installed version of Adobe Reader. But the official version for Windows Vista will become the newer
version than Adobe Reader 8. The newest version of Adobe reader can be downloaded from the following
WEB site.
http://www.adobe.com/
3-2 Other applications that you need to get the version for Windows Vista
The update version of the following applications will be able to download in April.
Sonic (CD/DVD writing application) (for internal Combo or Super Multi drive users only)
3-3 If you need to install XP again
You will need to restore the BIOS before installing Windows XP by the recovery DVD.
Right after restoring the BIOS, you should remove AC adaptor and the battery, and then return them back.
The procedure to restore BIOS is close to the step you had done to update BIOS for Vista in
2-2 Detail procedure for upgrading
2) Extracts all of the downloaded files in Step3
Step4: Update of BIOS
Except the file names (the downloaded file is bios_30_1_r060215B(.exe) and the extracted file is bu301x14(.exe).
3-4 SETUP utility
You might have been requested to change or disable BIOS SETUP utility. Once you press F9 to set default value,
these settings will return to its default values. Set or disable again after you load default setting in the BIOS
SETUP utility.
4 Restrictions
4-1 INDEMNIFICATION
Matsushita Electric Industrial Co., Ltd. ( "MEI" ) shall assume no indemnity obligation to the customers, hold harmless
MEI and its subsidiaries, affiliates, directors, officers, employees, agents and independent contractors retained by MEI
from and against any loss, cost, liability or expense (including, but not limited to, court costs and reasonable fees of
attorneys and other professionals) arising out of or resulting from any use of this utility or any claim against the
customers from the third party.
4-2 Revision history
28th
st
Feb. 2007 : 1 version.
23
24
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising