Extreme Networks 800
DATA SHEET
Extreme Networks 800-Series
Cost-effective fully-featured enterprise-class 10/100 and 10/100/1000 switch family
BENEFITS
Business Alignment
• Cost-effective and reliable
edge connectivity
Operational Efficiency
• Consolidated management
capabilities
• Fully featured CLI,webbased, TACACS+ or NetSight
management enabling ease of
management thereby lowering
Total Cost of Ownership (TCO)
Security
• Network accesssecured by 802.1x,
MAC address and web- based
authentication methods
Support and Service
• Fully featured 10/100 and 10/100/1000 edge connectivity solution
• Line rate L2 switching
• IEEE 802.3at high power PoE options
• Optional redundant power for all models
• Extreme Networks award-winning Lifetime Warranty support
Product Overview
• Industry leading customer
satisfaction and first call
resolution rates.
The Extreme Networks 800-Series is a highly reliable Fast Ethernet and Gigabit
• Comprehensive lifetime warranty
support of the bandwidth-intensive and delay-sensitive requirements of today’s
Ethernet family of edge switches that provides scalable, wire-rate performance in
demanding applications.
The 800-Series is comprised of ten models (four 10/100 switches and six
10/100/1000 switches):
• 24 port 10/100 with four SFP uplinks and two 10/100/1000 ports
• 24 port 10/100 PoE with four SFP uplinks and two 10/100/1000 ports
• 48 port 10/100 with four SFP uplinks and two 10/100/1000 ports
• 48 port 10/100 PoE with four SFP uplinks and two 10/100/1000 ports
• 8 port 10/100/1000 with two SFP uplinks
• 8 port 10/100/1000 PoE with two SFP uplinks
• 24 port 10/100/1000 with four SFP uplinks
• 24 port 10/100/1000 PoE with four SFP uplinks
• 48 port 10/100/1000 with four SFP uplinks
• 48 port 10/100/1000 PoE with four SFP uplinks
Up to eight switches can be interconnected to form a single managed entity
thereby creating a virtual switch that can be managed with a single IP address to
help minimize management requirements. An integral power supply is the primary
800 Series – Data Sheet
1
source of power for all 800-Series switches and complete power
redundancy is provided by optional external power supplies.
All PoE switches support IEEE 802.3at which allows up to 30
watts of PoE power to be provided to a single port. Dynamic
power allocation is supported which allows unused allocated PoE
IEEE 802.3at High Power PoE
Up to 30W per port
IEEE 802.3az Energy Efficient Ethernet
08G models only
power to be returned to the central pool for use on other ports.
IEEE 802.3i – 10Base – T
Up to 375 watts of PoE power are available on the 24 port and
IEEE 802.3u – 100Base – T, 100Base - FX
48 port PoE models.
IEEE 802.3z – GE over Fiber
End users can be authorized via IEEE 802.1X, MAC address or
Full/half duplex auto – sense support on all ports (Auto – MDIX)
web-based authentication. Class of service, bandwidth control and
Access Control Lists( ACLs) are standard features on all switches.
Most models have fans (the 24 port 10/100 switch is fan-less) but
the fans on most of the non- PoE models do not run unless the
temperature exceeds 36°C thereby providing quiet operation.
There is also built in temperature monitoring that provides high
temperature alerts to the end user so that the optimal operating
environment can be maintained.
800-Series switches can be managed via a Command Line
Interface (CLI), an excellent web interface or via NetSight,
Extreme Networks’ advanced management application.
The 800-Series carries an industry-leading Lifetime Warranty
which provides next day shipment, telephone support for one
year, bug fixes and web-based support or five years after the
product goes end of sale.
Features/Standards and Protocols
MAC ADDRESS TABLE SIZE
ERPS – Ethernet Ring Protection Switching L2 Multicast Control
IGMP Snooping v1/v2/v3
MLD Snooping
Jumbo Frame support (12,288 bytes)
Loop Protection
One–to–One and Many–to–One Port Mirroring Port Description
Root Guard
STP Pass – Thru
VLAN SUPPORT
Generic Attribute Registration Protocol (GARP)
Generic VLAN Registration Protocol (GVRP)
IEEE 802.1p – Traffic classification
IEEE 802.1q – VLAN Tagging/Trunking
IEEE 802.1 Q–in–Q
Port – based VLAN
MAC – based VLAN
Protocol – based VLAN
Private VLAN
VLAN Trunking
Tagged-based VLAN
16,000
Q–in–Q
VLANS
QUALITY OF SERVICE
4,094 VLAN IDs
Up to 4094 Static VLANs
Up to 255 Dynamic VLANs
SWITCHING SERVICES
IEEE 802.1AB – LLDP
ANSI/TIA – 1057 – LLDP – MED
Inventory & Capabilities Only
IEEE 802.1D – MAC Bridges
IEEE 802.1s – Multiple Spanning Trees
8 Priority Queues per Port
802.3x Flow Control
Class of Service (CoS)
Rate Limiting/Bandwidth Control
Layer 2/3/4 Classification
Multi–layer Packet Processing with ACLs
Mixed Queuing Control – Strict and Weighted Round Robin
Source/Destination MAC Address with ACLs
Source/Destination IP address with ACLs
TCP/UDP port number with ACLs
IEEE 802.1t – 802.1D Maintenance
SECURITY
IEEE 802.1w – Rapid Spanning Tree IEEE 802.3 – Ethernet
ARP Spoof Protection
IEEE 802.3ab – GE over Twisted Pair IEEE 802.3ad –
DHCP Spoof Protection EAP Pass Thru
Link Aggregation
IP Source Guard
8 ports per group
8–port models: 5 groups
24–port models: 14 groups
48–port models: 26 groups
IEEE 802.3af – PoE
IEEE 802.1X Port Authentication
MAC–based Port Authentication
Optional Local Database for Authentication
RADIUS Accounting for network access
RFC 3580 RADIUS Usage Guidelines—no authorization
mechanism based on Filter–ID Secured Shell (SSHv2)
800 Series – Data Sheet
2
Features/Standards and Protocols
Secured Socket Layer (SSL v3)
Trusted Host
Denial of Service (DoS) Attack Prevention
BPDU Attack Protection
Multi–user Authentication Per Port
Web–based Port Authentication
Operation, Administration & Maintenance – (OAM) support
RMON (Stats, History, Alarms, Events)
RSPAN – Remote Port Mirroring
Simple Network Management Protocol (SNMP) v1/v2c/v3
SSHv2
TACACS+ authentication
Web–based Management
SYSLOG – up to 4 servers supported Authentication,
ROUTING
Authorization and Accounting (AAA) management
IPv4 Static Routes
RFC 768 – UDP
IPv6 Default Routing
RFC 783 – TFTP
MIB SUPPORT
RFC 792 – ICMP
RFC 791 – IP
ANSI/TIA – 1057 – LLDP – MED MIB
RFC 793 – TCP
IEEE 802.1AB – LLDP MIB
RFC 826 – ARP and ARP Redirect
IEEE 802.1X MIB – Port Access
RFC 854 – Telnet
IEEE 802.3ad MIB – LAG MIB
RFC 951, RFC 1542 – DHCP/BOOTP Relay
RFC 1213 – MIB/MIB II
RFC 1157 – SNMP
RFC 1493, RFC 4188 – BRIDGE–MIB
RFC 1901 – Community–based SNMPv2
RFC 1643 – Ethernet – like MIB
RFC 1981 – Path MTU for IPv6
RFC 2571 – 2576 – SNMP Framework MIB
RFC 2030 – Simple Network Time Protocol (SNTP)
RFC 2618 – RADIUS Authentication Client MIB
RFC 2131, RFC 3046 – DHCP Client/Relay
RFC 2620 – RADIUS Accounting Client MIB
RFC 2465 – IPv6 MIB
RFC 2674, RFC 4363 – 802.1p MIB
RFC 2933 – IGMP MIB
RFC 2674 – QBRIDGE – MIB VLAN Bridge MIB
RFC 3176 – sFlow
RFC 2737 – Entity MIB (physical branch only)
RFC 3413 – SNMP Applications MIB
RFC 2819 – RMON – MIB
RFC 3414 – SNMP User–based Security Module (USM) MIB
RFC 2863 – IfMIB
RFC 3415 – View–based Access Control
RFC 2925 – Ping & Traceroute MIB
Model for SNMP
RFC 3413 – SNMP v3 Applications MIB
RFC 3414 – SNMP v3 User–based Security Module (USM) MIB
RFC 3415 – View–based Access Control Model for SNMP
RFC 3584 – SNMP Community MIB
RFC 3636 MAU MIB – Obsoletes RFC 2668
RFC 4022 – MIB for TCP
RFC 4113 – MIB for UDP
RFC 6101 - SSL v3
MANAGEMENT & OTHER RFCS
Command Line Interface (CLI) with four access levels
Configuration Upload/Download
Firmware Download
Dual IPv4/IPv6 Management Support
Editable Text–based Configuration File
TFTP Client
Command Logging
Connectivity Fault Management (CFM)
Multi–configuration File Support
System Power & Port Status LEDs
NMS Console
NMS Inventory Manager
Cable Diagnostics
Traceroute
Network Load Balancing
800 Series – Data Sheet
3
800-Series Switch Model Specifications
08H20G4-24
08H20G4-24P
08H20G4-48
08H20G4-48P
Performance
Switching Fabric Bandwidth
9.5 Mpps
9.5 Mpps
13.1 Mpps
13.1 Mpps
Switching Capacity
12.8 Gbps
12.8 Gbps
17.6 Gbps
MAC Address Table
16K
16K
16K
16K
VLANs Supported
255
255
255
255
802.3af Interoperable
N/A
Yes
N/A
Yes
802.3at Interoperable
N/A
Yes
N/A
Yes
System Power
N/A
375 watts per switch— up to
30 watts per port Per-port
switch power monitor:
Enable/disable
Priority safety
Overload & short circuit
protection
N/A
375 watts per switch -up to
30 watts per port Per-port
switch power monitor:
Enable/disable
Priority safety
Overload & short circuit
protection
Dimensions (H x W x D),
Rack Units
4.4 cm H x 44.1 cm W x 21.66
cm D
1.73”H x 17.36” W x 8.53” D
1U
4.4 cm H x 44.1 cm W x 36.8
cm D
1.73” H x 17.36” W x 14.51” D
1U
4.4 cm H x 44.1 cm W x
37.82 cm D
1.73” H x 17.36” W x 14.89” D
1U
4.4 cm H x 44.1 cm W x
36.8 cm D
1.73”Hx17.36”Wx 14.51” D
1U
Net Weight
2.30 kg (5.10 lb)
5.40 kg (11.9 lb)
4.45 kg (9.80 lb)
6.09 kg (13.4 lb)
MTBF
597,684 hours
272,651 hours
407,895 hours
219,440 hours
Physical Ports
(24) 10/100 ports
(4) 1Gb SFP ports
(2) 10/100/1000 ports
(1) Console port
Max: 28 active ports
(24) 10/100 PoE ports
(4) 1Gb SFP ports
(2) 10/100/1000 ports
(1) Console port
Max: 28 active ports
(48) 10/100 ports
(4) 1Gb SFP ports
(2) 10/100/1000 ports
(1) Console port
Max: 52 active ports
(48) 10/100 PoE ports
(4) 1Gb SFP ports
(2) 10/100/1000 ports
(1) Console port
Max: 52 active ports
Power Supplies
1 Internal, 1 optional RPS
1 Internal, 1 optional RPS
1 Internal, 1 optional RPS
1 Internal, 1 optional RPS
Normal Input Voltage
100 - 240 VAC
100 - 240 VAC
100 - 240 VAC
100 - 240 VAC
Input Frequency
50 - 60 Hz
50 - 60 Hz
50 - 60 Hz
50 - 60 Hz
Input Current
0.5A max
7.65A max
0.8A max
7.65A max
Power Consumption
19.8W
31.4 W
33.8 W
45.8W
Operating Temperature
0° to 50° C (32° to 122° F)
0° to 50° C (32° to 122° F)
0° to 50° C
(32° to 122° F)
0° to 50° C
(32° to 122° F)
Non-Operating Temperature
-40° to 70° C
(-40° to 158° F)
-40° to 70° C
(-40° to 158° F)
-40° to 70° C
(-40° to 158° F)
-40° to 70° C
(-40° to 158° F)
Heat Dissipation
66 BTUs/Hr
105 BTUs/Hr
114 BTUs/Hr
153 BTUs/Hr
Operating Relative Humidity
5% to 95% (noncondensing)
5% to 95% (non- condensing)
5% to 95% (noncondensing)
5% to 95%
(non- condensing)
Acoustics
Fanless: 0dB
Fan Low Speed: 36dB Fan
High Speed: 49dB
Fan Off: 0dB
Fan On: 42dB
Fan Low Speed: 39dB
Fan High Speed: 49dB
PoE Specifications
Physical Specifications
Power
Environmental
800 Series – Data Sheet
4
800-Series Switch Model Specifications
08G20G2-08
08G20G2-08P
08G20G4-24
Performance
Switching Throughput Mpps
14.9 Mpps
14.9 Mpps
41.7 Mpps
Switching Capacity
20 Gbps
20 Gbps
56 Gbps
MAC Address Table
16K
16K
16K
VLANs Supported
255
255
255
802.3af Interoperable
N/A
Yes
N/A
802.3at Interoperable
N/A
Yes
N/A
System Power
N/A
104 watts per switch with up to 30
watts per port Per-port switch power
monitor:
Enable/disable
Priority safety
Overload & short circuit protection
N/A
Dimensions (H x W x D), Rack Units
4.06 cm H x 20.95cm W x 22.2cm D
”1.60 H x 8.25” W x 8.74” D
1U
4.06 cm H x 20.95 cm W x 22.2 cm D
1.60” H x 8.25” W x 8.74” D
1U
4.4 cm H x 44.1 cm W x 21.66
cm D
1.73” H x 17.36” W x 8.53” D
1U
Net Weight
1.50 kg (3.30 lb)
1.86 kg (4.10 lb)
2.35 kg (5.20 lb)
MTBF
865,139 hours
536,628 hours
532,023 hours
Physical Ports
(8) 10/100/1000 ports
(2) 1Gb SFP ports
(1) Console port
Max: 10 active ports
(8) 10/100/1000 ports
(2) 1Gb SFP ports
(1) Console port
Max: 10 active ports
(24) 10/100/1000 ports
(4) 1Gb SFP ports
(1) Console port
Max: 28 active ports
Power Supplies
1 Internal, 1 optional RPS
1 Internal, 1 optional RPS
1 Internal, 1 optional RPS
Normal Input Voltage
100 - 240 VAC
100 - 240 VAC
100 - 240 VAC
Input Frequency
50 - 60 Hz
50 - 60 Hz
50 - 60 Hz
Input Current
0.4A max
2.0A max
0.8A max
Power Consumption
15.9 W
23.3 W
30.0 W
Operating Temperature
0° to 50° C
(32° to 122° F)
0° to 50° C
(32° to 122° F)
0° to 50° C
(32° to 122° F)
Non-Operating Temperature
-40° to 70° C
(-40° to 158° F)
40° to 70° C
(-40° to 158° F)
-40° to 70° C
(-40° to 158° F)
Heat Dissipation
47 BTUs/Hr
80 BTUs/Hr
100 BTUs/Hr
Operating Relative Humidity
5% to 95% (non- condensing)
5% to 95% (non- condensing)
5% to 95% (non- condensing)
Acoustics
Fan Off: 0dB
Fan On: 38dB
Fan Off*: 0db
Fan Low Speed: 38dB
Fan Off: 0dB
Fan On: 44dB
PoE Specifications
Physical Specifications
Power
Environmental
* requires firmware release 1.02.02 Hardware Rev 5C or higher - 60
watts or less at 30°C or less Hardware Rev lower than 5C—30 watts or
less at 30°C or less
800 Series – Data Sheet
5
800-Series Switch Model Specifications
08G20G4-24P
08G20G4-48
08G20G4-48P
Performance
Switching Throughput Mpps
41.7 Mpps
77.4 Mpps
77.4 Mpps
Switching Capacity
56 Gbps
104 Gbps
104 Gbps
MAC Address Table
16K
16K
16K
VLANs Supported
255
255
255
802.3af Interoperable
Yes
N/A
Yes
802.3at Interoperable
Yes
N/A
Yes
System Power
375 watts per switch with up to 30
watts per port Per-port switch
power monitor:
Enable/disable
Priority safety
Overload & short circuit protection
N/A
375 watts per switch with up to 30
watts per port Per-port switch
power monitor:
Enable/disable
Priority safety
Overload & short circuit protection
Dimensions (H x W x D), Rack Units
4.4 cm H x 44.1 cm W x 37.82 cm D
1.73” H x 17.36” W x 14.89” D
1U
4.4 cm H x 44.1 cm W x 37.82cm D
1.73” H x 17.36” W x 14.89” D
1U
4.4 cm H x 44.1 cm W x 37.82 cm D
1.73” H x 17.36” W x 14.89” D
1U
Net Weight
5.54 kg (12.2 lb)
4.50 kg (9.90 lb)
6.14 kg (13.5 lb)
MTBF
275,199 hours
369,938 hours
225,591 hours
Physical Ports
(24) 10/100/1000 PoE ports
(4) 1Gb SFP ports
(1) Console port
Max: 28 active ports
(48) 10/100/1000 ports
(4) 1Gb SFP ports
(1) Console port
Max: 52 active ports
(48) 10/100/1000 PoE ports
(4) 1Gb SFP ports
(1) Console port
Max: 52 active ports
Power Supplies
1 Internal, 1 optional RPS
1 Internal, 1 optional RPS
1 Internal, 1 optional RPS
Normal Input Voltage
100 - 240 VAC
100 - 240 VAC
100 - 240 VAC
Input Frequency
50 - 60 Hz
50 - 60 Hz
50 - 60 Hz
Input Current
7.65A max
1.2A max
7.65A max
Power Consumption
36.4 W
56.1 W
63.1 W
Operating Temperature
0° to 50° C
(32° to 122° F)
0° to 50° C
(32° to 122° F)
0° to 50° C
(32° to 122° F)
Non-Operating Temperature
-40° to 70° C
(-40° to 158° F)
-40° to 70° C
(-40° to 158° F)
40° to 70° C
(-40° to 158° F)
Heat Dissipation
124 BTUs/Hr
190 BTUs/Hr
215BTUs/Hr
Operating Relative Humidity
5% to 95% (non- condensing)
5% to 95% (non- condensing)
5% to 95% (non- condensing)
Acoustics
Fan Low Speed: 38dB
Fan High Speed: 50dB
Fan Low Speed: 37dB Fan High Speed:
42dB
Fan Low Speed: 38dB
Fan High Speed: 51dB
PoE Specifications
Physical Specifications
Power
Environmental
800 Series – Data Sheet
6
800-Series Switch Model Specifications
ALL MODELS
Agency Specifications
Vibration
IEC 68-2-6, IEC68-2-36
Shock
IEC 68-2-29
Drop
IEC 68-2-32
Altitude – operating
Operational up to 2,000 m 6,561 feet
Safety
UL 60950-1, FDA 21 CFR 1040.10 and 1040.11, CAN/CSA C22.2, No. 60950-1, EN 60950-1, EN 60825-1, EN 60825-2, IEC 60950-1,
2006/95/EC (Low Voltage Directive)
Electromagnetic
Compatibility
FCC 47 CFR Part 15 (Class A), ICES-003 (Class A), EN 55022 (Class A), EN 55024, EN 61000-3-2,
EN 61000-3-3, AS/NZ CISPR-22 (Class A). VCCI V-3. CNS 13438 (BSMI), 2004/108/EC (EMC Directive)
Environmental
2002/95/EC (RoHS Directive), 2002/96/EC (WEEE Directive), Ministry of Information Order #39 (China RoHS)
Note: Switches do not ship with a console cable since every switch can be fully managed via a web browser.
If Command Line Interface (CLI) management is desired, please order the optional console cable.
Model Number Information
PART NUMBER
DESCRIPTION
800-Series 10/100 Switches
08H20G4-24
24 port 10/100 800-Series Layer 2 switch with Quad 1Gb uplinks
08H20G4-24P
24 port 10/100 PoE (802.3at) 800-Series Layer 2 switch with Quad 1Gb uplinks
08H20G4-48
48 port 10/100 800-Series Layer 2 switch with Quad 1Gb uplinks
08H20G4-48P
48 port 10/100 PoE (802.3at) 800-Series Layer 2 switch with Quad 1Gb uplinks
800-Series 10/100/1000 Switches
08G20G2-08
8 port 10/100/1000 800-Series Layer 2 switch with Dual 1Gb uplinks
08G20G2-08P
8 port 10/100/1000 PoE (802.3at) 800-Series Layer 2 switch with Dual 1Gb uplinks
08G20G4-24
24 port 10/100/1000 800-Series Layer 2 switch with Quad 1Gb uplinks
08G20G4-24P
24 port 10/100/1000 PoE (802.3at) 800-Series Layer 2 switch with Quad 1Gb uplinks
08G20G4-48
48 port 10/100/1000 800-Series Layer 2 switch with Quad 1Gb uplinks
08G20G4-48P
48 port 10/100/1000 PoE (802.3at) 800-Series Layer 2 switch with Quad 1Gb uplinks
Optional Redundant Power Supplies
08A-RPS-24
Redundant Power Supply for 8 port non-PoE 800-Series switch
08A-RPS-130P
Redundant Power Supply for 8 port 802.3at PoE 800-Series switch
08A-RPS-150
Redundant Power Supply for 24 and 48 port non-PoE 800-Series switches (optional shelf mounting listed below)
08A-RPS-500P
Redundant Power Supply for 24 and 48 port 802.3at PoE 800-Series switches
Accessories
08A-CON-CBL
Console Cable for 800-Series switch
Mounting Options for 8 Port Switches
D2-LOCKBOX
Metal Lockbox for D2/800-8 Ports
D2-RMT
Rack Mount Kit for D2/800-8 Ports
D2-TBL-MNT
Under Table Mount Kit for D2/800-8 Ports
D2-WALL-MNT
Wall Mount Kit for D2/800-8 Ports
Mounting Options for RPS Units
STK-RPS-150CH2
2-slot modular power supply shelf (power supply 08A-RPS-150 sold separately)
STK-RPS-150CH8
8-slot modular power supply shelf (power supply 08A-RPS-150 sold separately)
800 Series – Data Sheet
7
Transceivers
Extreme Networks transceivers provide flexible connectivity
options for Ethernet. All Extreme Networks transceivers
meet the highest quality for extended life cycle and the best
possible return on investment. For detailed specifications,
compatibility and ordering information please go to: http://www.
extremenetworks.com/products/transceivers-ds.pdf.
Warranty
As a customer-centric company, Extreme Networks is
committed to providing quality products and solutions. In the
event that one of our products fails due to a defect, we have
developed a comprehensive warranty that protects you and
provides a simple way to get your products repaired or media
replaced as soon as possible.
All 800-Series switches come with the Extreme Networks
lifetime warranty against manufacturing defects. For full warranty
terms and conditions please go to: http://www.extremenetworks.
com/support/warranty.aspx
Service and Support
Extreme Networks provides comprehensive service offerings that
range from Professional Services to design, deploy and optimize
customer networks, customized technical training, to service and
support tailored to individual customer needs. Please contact
your Extreme Networks account executive for more information
about Extreme Networks Service and Support.
http://www.ExtremeNetworks.com/contact
Phone +1-408-579-2800
©2014 Extreme Networks, Inc. All rights reserved. Extreme Networks and the Extreme Networks logo are trademarks or registered trademarks of Extreme Networks, Inc.
in the United States and/or other countries. All other names are the property of their respective owners. For additional information on Extreme Networks Trademarks
please see http://www.extremenetworks.com/about-extreme/trademarks.aspx. Specifications and product availability are subject to change without notice. 6093-0214
WWW.EXTREMENETWORKS.COM
800 Series – Data Sheet
8
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising