Operating instructions YAMAHA CDX-396

Operating instructions YAMAHA CDX-396
You can read the recommendations in the user guide, the technical guide or the installation guide for YAMAHA CDX-396. You'll
find the answers to all your questions on the YAMAHA CDX-396 in the user manual (information, specifications, safety advice,
size, accessories, etc.). Detailed instructions for use are in the User's Guide.
User manual YAMAHA CDX-396
User guide YAMAHA CDX-396
Operating instructions YAMAHA CDX-396
Instructions for use YAMAHA CDX-396
Instruction manual YAMAHA CDX-396
You're reading an excerpt. Click here to read official YAMAHA
CDX-396 user guide
http://yourpdfguides.com/dref/842504
Manual abstract:
@@@@@@Retain this Owner's Manual in a safe place for future reference. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. SAFETY INSTRUCTIONS 1 2 3 4 5 Read Instructions All the safety and operating instructions
should be read before the unit is operated. Retain Instructions The safety and operating instructions should be retained for future reference. Heed Warnings
All warnings on the unit and in the operating instructions should be adhered to. Follow Instructions All operating and other instructions should be followed.
@@@@A unit and cart combination should be moved with care. @@@@Ventilation The unit should be situated so that its location or position does not
interfere with its proper ventilation. For example, the unit should not be situated on a bed, sofa, rug, or similar surface, that may block the ventilation
openings; or placed in a builtin installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings. Heat The unit
should be situated away from heat sources such as radiators, stoves, or other appliances that produce heat.
10 Power Sources The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the unit. PowerCord Protection Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience receptacles, and the point where they exit from the unit. Cleaning The unit should be cleaned only as
recommended by the manufacturer. Nonuse Periods The power cord of the unit should be unplugged from the outlet when left unused for a long period of
time. Object and Liquid Entry Care should be taken so that objects do not fall into and liquids are not spilled into the inside of the unit.
Damage Requiring Service The unit should be serviced by qualified service personnel when: A. The power-supply cord or the plug has been damaged; or B.
Objects have fallen, or liquid has been spilled into the unit; or C. The unit has been exposed to rain; or D. The unit does not appear to operate normally or
exhibits a marked change in performance; or E.
The unit has been dropped, or the cabinet damaged. Servicing The user should not attempt to service the unit beyond those means described in the operating
instructions. All other servicing should be referred to qualified service personnel. Power Lines An outdoor antenna should be located away from power lines.
Grounding or Polarization Precautions should be taken so that the grounding or polarization is not defeated. 11 12 13 6 14 6A 15 7 8 16 9 17 18 FCC
INFORMATION (for US customers only) 1. IMPORTANT NOTICE : DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the
instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the
FCC, to use the product. IMPORTANT : When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s
supplied with this product MUST be used.
Follow all installation instructions. Failure to follow instructions could void your FCC authorization to use this product in the USA. NOTE : This product has
been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class "B" digital devices. Compliance with these requirements
provides a reasonable level of assurance that your use of this product in a residential environment will not result in harmful interference with other electronic
devices. This equipment generates/uses radio frequencies and, if not installed and used according to the instructions found in the users manual, may cause
interference harmful to the operation of other electronic devices. Compliance with FCC regulations does not guarantee that interference will not occur in all
installations. If this product is found to be the source of interference, which can be determined by turning the unit "OFF" and "ON", please try to eliminate
the problem by using one of the following measures: Relocate either this product or the device that is being affected by the interference. Utilize power outlets
that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s. In the case of radio or TV interference, relocate/reorient the antenna. If
the antenna lead-in is 300 ohm ribbon lead, change the lead-in to coaxial type cable.
If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this type of product. If you can not
locate the appropriate retailer, please contact Yamaha Electronics Corp., U.S.A.
6660 Orangethorpe Ave, Buena Park, CA 90620. The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its
subsidiaries. 2. 3. We Want You Listening For A Lifetime YAMAHA and the Electronic Industries Association's Consumer Electronics Group want you to get
the most out of your equipment by playing it at a safe level.
One that lets the sound come through loud and clear without annoying blaring or distortion and, most importantly, without affecting your sensitive hearing.
Since hearing damage from loud sounds is often undetectable until it is too late, YAMAHA and the Electronic Industries Association's Consumer Electronics
Group recommend you to avoid prolonged exposure from excessive volume levels. CONTENTS CAUTION ........
..........
.....
.....
..........
...... 1 NOTES ABOUT DISCS ....
.....
.....
........ 2 FEATURES ..
..........
.....
.....
..........
......... 3 UNPACKING .
.....
.....
..........
..........
.....
... 3 NOTES ABOUT THE REMOTE CONTROL ..
..........
..........
.....
.....
..........
4 CONNECTIONS ..........
.....
.....
..........
... 5 IDENTIFICATION OF COMPONENTS .......
.....
.....
..........
..........
.....
.....
..........
... 6 BASIC OPERATION .......
.....
.....
......... 8 To pause play .
..........
.....
.....
..........
... 9 To stop play .......
.....
.....
..........
..........
9 To turn off the power .....
.....
..........
.... 9 To play directly from the desired track ......
.....
.....
..........
..........
.....
.....
..........
.. 9 To skip to the beginning of the desired track (SKIP SEARCH) ........
.....
.....
. 10 To advance or reverse play rapidly (MANUAL SEARCH) .........
..........
.. 10 Other useful functions ...
.....
..........
.. 11 RANDOM-SEQUENCE PLAY ........
. 13 REPEAT PLAY ....
.....
..........
..........
.... 13 PROGRAM PLAY .
.....
..........
..........
.. 14 INDEX SEARCH ...
.....
..........
..........
.. 15 TRACK PROGRAMMING FOR RECORDING TO TAPE ...
.....
..........
. 16 Automatic tape-programming ........ 16 Manual tape-programming .
.....
.....
. 18 Random sequential tapeprogramming .........
..........
.....
.....
.... 19 Automatic searching for the peak level on a disc ......
..........
.....
.....
...... 20 CD SYNCHRONIZED RECORDING ....
..........
.....
.....
..........
..........
.....
.....
.... 21 TROUBLESHOOTING ......
..........
.....
22 SPECIFICATIONS .....
..........
..........
.. 23 CAUTION: Read this before operating your unit. To assure the finest performance, please read this manual carefully. Keep it in a safe place for future
reference.
Install your unit in a well ventilated, cool, dry, clean place -- away from windows, heat sources, vibration, dust, moisture, or cold. To avoid humming sounds,
locate the unit away from other electrical appliances, motors, and transformers. To prevent fire or electrical shock, do not expose to rain and water. Be sure
to allow enough spaces for ventilation at the top, on left, right, and back sides of this unit.
You're reading an excerpt. Click here to read official YAMAHA
CDX-396 user guide
http://yourpdfguides.com/dref/842504
Do not operate the unit upside-down.
It may overheat, possibly causing damage. Never open the cabinet. If something drops into the set, contact your dealer. Do not use force on switches, knobs or
cords. When not planning to use this unit for long periods of time (i.e., vacation, etc.), disconnect the AC power plug from the wall outlet. Grounding or
polarization -- Precautions should be taken so that the grounding or polarization of the unit is not defeated. Do not clean the unit with chemical solvents; this
might damage the finish.
Use a clean, dry cloth. Be sure to read the "Troubleshooting" section on common operating errors before concluding that your unit is faulty. Do not place
another component on top of this unit, as damage or discoloration on the surface of the unit may result. To prevent damage by lightning, disconnect the power
cord from the wall outlet during an electrical storm. When disconnecting the power cord from the wall outlet, grasp the plug; do not pull the cord. Do not
plug the AC power plug to the wall outlet before you finish all connections. The voltage to be used must be the same as that specified on this unit. Using this
unit with a higher voltage than that which is specified is dangerous and may result in a fire or other type of accident causing damage. YAMAHA will not be
held responsible for any damage resulting from use of this unit with a voltage other than that which is specified. Sudden temperature changes and storage or
operation in an extremely humid environment may cause condensation inside the cabinet.
English CAUTION FOR MOVING THE UNIT Before moving the unit, first remove the disc from the unit, press POWER to turn the unit off, and then
disconnect the AC power plug from the wall outlet. CAUTION Use of controls or adjustments or performance of procedures other than those specified herein
may result in hazardous radiation exposure. As the laser beam used in this compact disc player is harmful to the eyes, do not attempt to disassemble the
cabinet. Refer servicing to qualified personnel only. For Canadian Customers To prevent electric shock, match wide blade of plug to wide slot and fully
insert.
This Class B digital apparatus complies with Canadian ICES-003. E-1 NOTES ABOUT DISCS Discs playable with this unit This compact disc player is
designed only for playing compact discs bearing the marks shown below. Never attempt to load any other type of disc into the unit. The unit will also play
8-cm (3-inch) compact discs. .
... Compact discs (digital audio) The most popular discs for commercially available audio CDs. .... CD-RW (ReWritable) digital audio discs The discs
repeatedly recordable by using CD recorders for audio recording. Recorded CD-RW discs can be played only with CD players which have the ability to play
CD-RW discs.
Notes Be sure to use a CD-RW disc made by a reliable manufacture. Be sure to use a CD-RW disc which has at least one of the following phrases on the disc
or disc case. FOR CONSUMER FOR CONSUMER USE FOR MUSIC USE ONLY .... CD-TEXT discs The discs recorded with text data such as album titles,
track titles and artist names. @@CDX-596 can display text data recorded on CD-TEXT discs. @@@@ If batteries leak, dispose of them immediately.
@@@@@@@@@@ If the placement of this unit causes noise to another equipment, such as a tuner, separate them from each other.
LINE OUT DIGITAL AUDIO OUT OPTICAL COAXIAL 1 2 1 RC PLAYER SYNCHRO DIMMER OPEN/ CLOSE 1 SPACE PEAK 2, 3 4 POWER TAPE
CLEAR PROG 2 3 REPEAT RANDOM 1 Press POWER to turn on the power. 3 Press OPEN/CLOSE to close the disc tray. OPEN/ CLOSE POWER 2 Press
OPEN/CLOSE to open the disc tray, and load a disc. @@@@@@3 CDX-596 and CDX-496 only Shows the level of signals output into an amplifier or the
headphone level adjusted by pressing OUTPUT LEVEL +. 4 Shows the time displays.
(Refer to "Changing displays" on page 11.) 4 CDX-496, CDX-396 1 4 3 2 E-8 English To pause play Press . To play directly from the desired track Select a
desired track by using the numeric buttons. CDX-596 To resume play, press again (or press ). * on the front panel can also be used to stop play temporarily
or to resume play.
5 The selected track number is displayed CDX-496, CDX-396 To stop play Press . @@@@@@@@@@@@@@@@@@@@@@@@@@In that case,
"(NO ENTRY)" appears on the display. @@@@@@@@Spaces of about 4 seconds are inserted between the tracks. @@@@@@@@@@ This indication
appears while the unit is mixing up tracks. RANDOM To cancel random-sequence play Press or RANDOM. Total remaining time on the disc will not be
displayed during random-sequence play. CDX-596 and CDX-496 only If the power is switched off during random-sequence play, pressing POWER again to
turn on the unit will automatically restore random-sequence play. RANDOM or REPEAT PLAY You can play any desired track or the entire disc repeatedly
by pressing REPEAT. The repeat play mode will change whenever you press REPEAT. SINGLE REPEAT (S) CDX-596 A single track is played repeatedly.
* This also works for programmed play and random-sequence play. (If repeat play is switched off, programmed play or random-sequence play will be
resumed.) (off) FULL REPEAT (F) REPEAT S All tracks (the entire disc) are played repeatedly. * During programmed play, all programmed tracks are
played repeatedly. * During random-sequence play, all randomly sequenced tracks are played repeatedly in the same order. * CDX-596 and CDX-496 only If
the power is switched off during FULL REPEAT play, pressing POWER again to turn on the unit will automatically restore FULL REPEAT play. REPEAT F
REPEAT CDX-496, CDX-396 (off) SINGLE REPEAT FULL REPEAT E-13 PROGRAM PLAY You can enjoy listening to your favorite tracks in any desired
order by programming tracks. As many as 40 tracks can be programmed in sequence. TAPE CLEAR PROG 2, 4 5 3 REPEAT RANDOM 1 2 3 4 5 6 3 1 Press
to stop the unit. 7 8 9 0 +I0 INDEX 1 Program a desired track by pressing the corresponding numeric button.
6 Repeat this operation to program more tracks. You can select the same track again. 2 Press PROG. CDX-596 PROGRAM 4 Blinks. CDX-496, CDX-396
PROGRAM When programming is finished, press PROG.
PROG PROG 5 Press to begin play. TOTAL Blinks. Display information during programming CDX-596 PROGRAM 1 6 1 Shows the program number for the
track to be programmed next. 2 Shows the selected track number. 3 Shows only the numbers of programmed tracks.
4 Shows the total time of the tracks currently programmed. * If the total time becomes 100 minutes or more, the first digit will not be displayed. 2 PROGRAM
3 6 CDX-496, CDX-396 PROGRAM 1 TOTAL 4 Notes If, during programming, TIME is pressed, the program number display can be changed to display the
total time of the programmed tracks.
You're reading an excerpt. Click here to read official YAMAHA
CDX-396 user guide
http://yourpdfguides.com/dref/842504
To return to the previous display, press TIME once again. / ( SKIP/SEARCH ) can be used during playing, but only within the range of the programmed
tracks. / ( SKIP/SEARCH ) can be used during playing to search all tracks, including unprogrammed tracks. 2 PROGRAM 4 TOTAL E-14 3 English To stop
program play Press . The first programmed track number will be displayed. . Play will begin from the To resume play, press beginning of the program.
To check program data 1. If during program play, press . 2. Press PROG. 3. Each time (SKIP/SEARCH ) is pressed, the track numbers and sequential order
of the programmed tracks can be checked one after another. The display of the track number can be returned (sequentially in reverse order) by pressing (
SKIP/SEARCH). To clear program data There are several methods, as described below. Press or CLEAR while the unit is stopped. Open the disc tray.
Switch off the power. To correct program data 1. Follow the procedure described in "To check program data". 2. Display the track number to be corrected by
pressing / ( SKIP/SEARCH ).
3. Press a numeric button to select a desired track to replace the one displayed. The previously programmed track will be cleared from the memory, and the
new one will be programmed. 4. Press PROG to complete the correction.
To begin play immediately after making the correction, press instead of pressing PROG. INDEX SEARCH If the disc includes index numbers, play can be
started from any desired index number. 1 To cancel the index search function Press a numeric button to select a track which has index numbers. Press
INDEX. Notes Not all discs have index numbers. @@@@@@@@@@@@@@@@@@@@@@CDX-496, CDX-396 "C-46" turns on. 6 The unit will
pause at the end of side A of the tape. Turn the tape over to side B. Resume recording, and then press or on this unit. You can select any of the four tape
lengths by pressing TAPE.
46 54 60 E-16 (off) 90 English Notes In step 4, you can check the program data for side A and side B. CDX-596 1 PROGRAM 12345 234 A CDX-496,
CDX-396 All tracks may not be programmed if the tape's length is not enough. To program all tracks, use a tape that is longer than the actual playing time.
To check, cancel or correct program data, refer to page 15. * When checking program data, note that "PAUSE" or "Pu" appears between track numbers for
side A and side B. Up to 40 tracks can be programmed. A pause inserted between side A and B is counted as one track. CD synchronized recording function
can be used if your tape deck is compatible with it. If so, in step 5 and 6, press SYNCHRO and then press on this unit's remote control. Recording
automatically begins.
(For details, refer to page 21.) 1 PROGRAM A 3 TOTAL 4 2 1 Shows the number of tracks programmed on each side right after the programming is finished.
It is then replaced by the number of the first programmed track on side A. 2 Shows the programmed track numbers on each side. 3 Shows the total time of
programmed tracks on each side.
4 Shows the side of the tape. E-17 Manual tape-programming This is for recording desired tracks in any order onto a tape. SYNCHRO DIMMER OPEN/
CLOSE REPEAT TEXT/ TIME RANDOM SPACE PEAK 4 3, 5 1 TAPE CLEAR PROG 2 7 6, 7 1 2 3 4 5 6 7 8 9 0 +I0 INDEX Follow steps 1 3 on page 16.
Blinks. 5 1 2 3 4 5 6 7 8 9 10 11 12 A Use numeric buttons to select the track numbers (to be recorded on side B) in any order.
1 2 3 2 Press PROG. CDX-596 PROGRAM 4 PROG 5 6 Blinks. CDX-496, CDX-396 PROGRAM A 7 8 9 0 +I0 TOTAL REMAIN Blinks. 6 7 Begin recording
on the tape deck, and then press on this unit. 3 Use numeric buttons to select desired tracks (to be recorded on side A) in any order. 1 2 3 The unit will pause
at the end of side A of the tape. Turn the tape over to side B. Resume recording, and then press or on this unit. 4 5 6 7 8 9 0 +I0 * Programmed track numbers
light up on the display. You can select a track which can be programmed for the remaining time on side A from track numbers flashing on the display.
You cannot, however, select a track number extinguished from the display. 4 When track selection for side A is finished, press TAPE. TAPE Notes If, in step 3
or 5, "ERROR" or "E rr" appears on the display, the track number just selected cannot be programmed because there is not enough time remaining on the
tape. However, at this time, if any other track number is flashing continuously on the display, you can program it instead of the unprogrammable one. In step
3 or 5, each time a selection is made, the track number and the tape's remaining time will be displayed, and then the display will change to indicate the next
program number. To check, cancel or correct program data, refer to page 15. * When checking program data, note that "PAUSE" or "Pu" appears between
track numbers for side A and side B. Up to 40 tracks can be programmed. If, however, a pause is inserted, it is counted as one track. CD synchronized
recording function can be used if your tape deck is compatible with it.
If so, in step 6 and 7, press SYNCHRO and then press on this unit's remote control. Recording automatically begins. (For details, refer to page 21.) A pause is
inserted. E-18 English Random sequential tape-programming The unit will automatically program tracks in random sequential order for recording to tape.
REPEAT RANDOM 2 3, 4 4 1 2 Follow steps 1 3 on page 16. Press RANDOM. RANDOM Notes Because programmed data changes every time RANDOM is
pressed, the unrecorded space at the end of each side of the tape also varies accordingly. All tracks may not be programmed if the tape's length is not enough.
To program all tracks, use a tape that is longer than the actual playing time.
In step 2, you can check the program data for side A and side B. CDX-596 1 * The unit will automatically program tracks at random for both side A and side
B considering the tape's total time. PROGRAM 2 12 4 6 234 8 A 3 Begin recording on the tape deck, and then press on this unit. CDX-496, CDX-396 1 3 4
The unit will pause at the end of side A of the tape. Turn the tape over to side B. Resume recording, and then press or on this unit. PROGRAM A TOTAL 4 2 1
Shows the number of tracks programmed on each side right after the programming is finished. It is then replaced by the number of the first programmed track
on side A. 2 Shows the programmed track numbers on each side. 3 Shows the total time of programmed tracks on each side.
4 Shows the side of the tape. Up to 40 tracks can be programmed. A pause inserted between side A and B is counted as one track. CD synchronized recording
function can be used if your tape deck is compatible with it.
You're reading an excerpt. Click here to read official YAMAHA
CDX-396 user guide
http://yourpdfguides.com/dref/842504
If so, in step 3 and 4, press SYNCHRO and then press on this unit's remote control. Recording automatically begins. (For details, refer to page 21.) E-19
Automatic searching for the peak level on a disc The unit automatically searches for a part in the disc where the source level peaks and next plays that part
repeatedly. When recording to tape, this feature is very helpful for adjusting the recording level on the tape deck. 1 To cancel the peak level search function
Press to stop the unit.
Press . (Some other buttons can also be used.) 2 Press PEAK. Notes Even if the peak level search is performed several times on the same disc, the same part
will not be always selected. That is because the unit searches for the peak level among parts of the disc that are randomly selected by the internal
microcomputer.
In the program play mode, this feature will function among the programmed tracks only. If program play is being performed, first press , and then press
PEAK. If program play is not being performed, only press PEAK. PEAK "PEAK" lights up on the display, and the peak level search is performed on the disc.
It takes a few minutes to search for the peak level.
Next, the part where the source level peaks is repeatedly played. Adjust the recording level on the tape deck listening to this sound. CDX-596 REPEAT 11 12
8 9 10 REPEAT 11 12 8 9 10 CDX-496, CDX-396 PEAK REPEAT PEAK REPEAT E-20 English CD SYNCHRONIZED RECORDING This unit can
automatically synchronize a tape deck's recording with CD play. With this function, you can record a CD on tape easily and precisely. This recording method
requires a YAMAHA tape deck compatible with this function. (Refer to the tape deck's operation manual to find out whether it is compatible or not.) * This
unit and the tape deck must be placed close to each other so that both of them can simultaneously receive the signals from this unit's remote control. 3
SYNCHRO DIMMER OPEN/ CLOSE SPACE TEXT/ TIME 1 3 REPEAT RANDOM 4 PEAK TAPE CLEAR PROG 1 2 3 4 5 6 3 1 7 8 9 0 +I0 INDEX Press
OPEN/CLOSE to open the disc tray, and load a disc. OPEN/ CLOSE 4 Press . 2 Both CD play and tape deck recording begin.
* CD play begins shortly after the recording. Load a tape on the tape deck. * The peak level search function of this unit is useful for adjusting recording level
on the tape deck. (Refer to page 20.) 5 3 If you want to stop recording temporarily and restart recording from a desired track, stop this unit by pressing , and
the tape deck as well, then follow steps 34 again. Press SYNCHRO. SYNCHRO To cancel synchronized CD-tape recording function Press . This unit enters
into the pause mode, and the tape deck enters into the REC/PAUSE mode. * In this state, the time display on this unit flashes on and off. If necessary, select a
desired track by pressing a numeric button or / ( SKIP/SEARCH ).
Notes To finish or stop the recording, make proper operations on the tape deck. @@@@@@@@SYMPTOM The unit does not switch ON when POWER is
pressed. The disc tray does not close completely. Play does not begin. PROBABLE CAUSE The power cord is not connected nor completely connected.
A foreign object is obstructing the tray. The disc is damaged. There is moisture on the laser pickup. The disc is loaded upside down. The disc is dirty.
The CD-RW (ReWritable) disc is not recorded correctly. The disc is a non-standard disc not playable with this unit. Play is delayed, or begins at the wrong
place. No sound. The disc may be scratched or damaged. Improper output cable connections. Check the disc carefully; replace it if necessary. Connect the
cables properly. If the problem persists, the cables may be defective. Set the amplifier controls to the correct input selection.
Adjust the volume by using the OUTPUT LEVEL + buttons. (CDX596 and CDX-496 only) Relocate the unit. Clean the disc. Securely connect the audio
cables. If the problem persists, the cables may be defective. Move the tuner and the main unit farther apart. Replace the disc. Adjust the volume by using the
OUTPUT LEVEL + buttons. Replace the batteries with new ones. Use within 6 m (19.
7 ft.) and 60° radius. Reposition the main unit. REMEDY Securely connect the power cord. Carefully check the disc tray and remove the foreign object.
Check the disc carefully; replace it if necessary. Wait 20 to 30 minutes after switching the unit ON before trying to play a disc. Reload the disc with the label
side up. Clean the disc. Replace the disc with a correctlyrecorded disc playable with this unit.
Improper amplifier operation. The OUTPUT LEVEL + buttons are set at minimum. (CDX-596 and CDX496 only) Sound "skips". The unit is being subjected
to vibrations or impacts. The disc is dirty. Sound "hums". Improper cable connections. Noise from a nearby tuner. Noise from inside of the disc tray. No sound
from the headphones.
(CDX-596 and CDX-496 only) The remote control does not work. The tuner is too close to the unit. The disc may be warped. The OUTPUT LEVEL + buttons
are set at minimum. The batteries of the remote control are too weak. Remote control is too far away or tilted too much. @@@@@@@@and Canada
models ....
.....
.....
..........
. 120V, 60 Hz Australia model .........
.....
.....
..........
..........
.... 240V, 50 Hz Europe and U.
K. models ....
..........
..........
.....
230V, 50 Hz General model .....
..........
.... 110/120/220/240V, 50/60 Hz Power consumption <CDX-596> ......
.....
.....
..........
..........
.....
.....
..........
...... 10W <CDX-496, CDX-396> ....
.....
.....
..........
..........
.....
.....
.... 9W Dimensions (W x H x D) ......
..........
.....
.. 435 x 96 x 277 mm (17-1/8" x 3-3/4" x 10-7/8") Weight ...
..........
..........
.....
.....
..........
........ 3.7 kg (8 lbs.
2 oz.) <CDX-596> ....
.....
..........
..........
.....
.....
..... <CDX-496, CDX-396> .....
..........
.....
.....
... 115 dB or more 105 dB or more Dynamic range <CDX-596> .......
..........
.....
.....
..........
....... 100 dB or more <CDX-496, CDX-396> ...
.....
.....
..........
....... 95 dB or more Wow & flutter ...
.....
.....
..........
..........
.....
.....
... Unmeasurable Output voltage (1 kHz, 0 dB) .......
..........
.....
.....
.... 2.0±0.5V Headphones output (20 dB) <CDX-596 and CDX-496 only> ....
..........
.....
.....
..........
..........
.....
.... 200±40 mV/150 ohms Accessories .
..........
..........
.....
.....
..........
.. RCA pin cable x 1 Remote control Battery (size AA, R6, UM-3) x 2 Please note that all specifications are subject to change without notice. Laser Diode
Properties Material .......
.....
.....
..........
..........
.....
.....
..........
..........
. GaAlAs Wavelength ....
.....
..........
..........
.....
.....
..........
..........
... 780 nm Emission Duration ..
.....
..........
..........
.....
.....
....... continuous Laser Output ...
..........
.....
.....
..........
..........
.....
max. 44.6 µW* * This output is the value measured at a distance of about 200 mm from the objective lens surface on the Optical Pick-up Block. E-23 English
YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA
PARK, CALIF.
90620, U.S.A. CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA ELECTRONIK EUROPA G.m.b.H.
SIEMENSSTR, 22-34, 25462 RELLINGEN, BEI HAMBURG, F.
R. OF GERMANY ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02,
FRANCE ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND SCANDINAVIA A.B. J
A WETTERGRENS GATA 1, BOX 30053, 400 43 VASTRA FRÖLUNDA, SWEDEN MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST.
You're reading an excerpt. Click here to read official YAMAHA
CDX-396 user guide
http://yourpdfguides.com/dref/842504
Powered by TCPDF (www.tcpdf.org)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising