CERTIFICATION APPROVAL: Refer to the

CERTIFICATION APPROVAL: Refer to the
1200 E. 151st Street
Olathe, KS 66062
913-397-8200
AVIATION SERVICE DOCUMENT NOTIFICATION
TO:
DATE:
Owners of Record for the G500/G600
April 8, 2015
SUBJECT:
STC SA02153LA-D G500 and G600 Systems, New Interfaces and Upgrades provided by GDU
620 Software Version 7.00, GAD 43e Software Version 2.30, and GRS 77 Software Version
3.04 for Part 23 AML STC
CERTIFICATION APPROVAL: Refer to the APPROVAL Section of STC SB1524
COMPLIANCE
All aspects of this STC data are optional and may be incorporated at the owner’s discretion and are not warranty
reimbursable.
PURPOSE
This STC Service Bulletin provides notification of the STC SA02153LA-D, G600 MDL Revision N and G500 MDL
Revision 1 for the following:
•
•
•
•
•
•
•
•
•
•
•
•
•
Enhanced MFD graphics and terrain resolution.
New MFD functions include; Smart Airspace, airspace altitudes, Geo-Referenced FliteCharts, range to
altitude arc, and full screen display of external video.
New PFD functions include; Timer/Clock, LP+V approach annunciation, and pilot selectable OAT units (i.e.
TAT, SAT, and ISA).
New TAWS-B alerting for power lines (G600 only).
New interface approvals include:
• GDL 88 ADS-B transceiver- New ADS-B traffic and weather display and control
• GTS 825/855 traffic system- TAS/TCAS I
• WX-500 Stormscope®
• GRA 5500/55 radar altimeter
• Cessna 300B/400B/800B/1000 autopilots, replace existing AA-801 altitude preselector
• GMU 44 magnetometer replacements, standard and low-clearance units
Added support for GWX 70 advanced features.
Added support for GWX 68/70 radar display on multiple displays.
New GDL 69 datalink weather products (i.e. icing, turbulence, and AIREP/PIREP) and Canadian weather
products.
GTN 6XX/7XX TAWS alerting (if enabled) will drive the G500/G600 system to eliminate TAWS alert timing
differences. Other external TAWS sources may impact particular SVT functions.
Expanded APC-65 autopilot computers applicability for the attitude interface.
Expanded Collins DME-42 interface to include parallel DME channeling.
Added Mid-Continent MD302 as acceptable attitude, altitude, and airspeed standby indicator.
This STC (SA02153LA-D) now includes G500 units (previously approved by STC SA0215SE-D). Future G500
installations and updates should refer to this STC and use the new G500 MDL.
Issues addressed in this STC update:
•
•
Service Advisory 1309, regarding verification of the displayed heading not noticeably drifting prior to takeoff,
this issue was addressed in GRS 77 V3.04.
Service Advisory 1421, regarding display of outside air temperature, the GDU 620 software version 7.00 adds
pilot selectable OAT units to match POH/AFM temperature display units.
•
•
•
•
Installation Bulletin 1430, the Installation Manual has been updated regarding Flight Director Setting and
applicability for installations with Century IV, 41, or 2000 Autopilots.
Installation Bulletin 1437, the installation Manual has been updated regarding installations interfaced with
KRA 405 Rad Alt.
Installation Bulletin 1444, the Installation Manual has been updated regarding configuration settings and note
applicability for installations with a Cessna 1000 IFCS Autopilot.
Service Advisory 1510, regarding unexpected display issues such as flashing “NO AP DATA” annunciation or
intermittent display of the Flight Director cue with GDU 620 software v6.21, GDU 620 software version 7.00
corrected the database card issue.
Please contact your local Garmin dealer for additional information and guidance in regards to STC Service
Bulletin 1524.
PRODUCTS AFFECTED
Aircraft modified by Part 23 AML STC SA02153LA-D G600 Master Drawing List (MDL) Revision N or earlier and
Aircraft modified by Part 23 AML STC SA02015SE-A G500 MDL Revision 12 or earlier.
DESCRIPTION
This STC Service Bulletin provides notification of STC installation approval for GDU 620 software version 7.00,
GAD 43e software version 2.30, and interfaces approved by G600 MDL Revision N and G500 MDL Revision 1.
Refer to Software Service Bulletin No. 1520 for instructions to load the software in the GDU 620, GAD 43e, and
GRS 77 and see a description of the TSO authorized changes.
Please contact your local Garmin Avionics Dealer (http://www.garmin.com/dealers/) for additional information or
for questions regarding this notification. This service notification and associated bulletin/advisory product changes
can only be implemented through Garmin’s authorized dealer and service center network. This document is not a
substitute for and cannot be used in lieu of the document(s) referenced above for airworthiness approval.
Garmin Service Document Notification
Page 2 of 2
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising