Wireless-G

Wireless-G
1
Set Up the PrintServer
F
NOTE: Linksys strongly recommends
that you set up your printer and install
your printer’s driver before you install the
PrintServer’s driver.
Before you begin, note the
PrintServer’s default name. It is shown
in the Server field on the sticker
located on the back panel. During
the Setup Wizard, this name is used to
identify the PrintServer you are
currently installing.
A
Package Contents
•
•
•
•
•
•
•
•
Wireless-G PrintServer with Multifunction Printer Support
Start Here Folder
Setup Wizard CD-ROM
User Guide on CD-ROM
Network Cable
USB 2.0 Cable
Power Supply
Quick Installation
2.4 GHz Wireless-G
802.11g
PrintServer
Wireless
B
C
D
E
Insert the Setup CD-ROM into
the computer’s CD-ROM drive.
The Setup Wizard should run
automatically. If it does not,
click the Start button and
choose Run. In the box that
appears, enter
D:\SetupWizard.exe (if “D” is
the letter of your CD-ROM
drive).
(The Ethernet connection is for
configuration purposes only.
Later you can disconnect the
Ethernet network cable when
the PrintServer has connected
wirelessly.)
B
H
C
ModelModel
No. No.
WPSM54G
K
Reconnect the printer’s power
adapter to the electrical outlet.
D
G
H
Connect the USB printer cable
to the USB port on the
PrintServer. Click Next.
E
J
Create a password and enter it
in the Password field. Enter the
new password again in the
Confirm field.
Click Next.
L
Wait a few moments while the
system searches for the
PrintServer.
Click Next.
If your network uses a router
that automatically assigns IP
addresses, select
Automatically obtain an IP
address (DHCP). If your network
uses a static IP address, select
Set IP configuration manually,
and enter the IP Address,
Subnet Mask, and Gateway in
the fields provided.
Click Next.
Select the appropriate
PrintServer. If you cannot find
the PrintServer, click Refresh
List.
Click Set up PrintServer.
with Multifunction Printer Support
Quick Installation
I
F
Connect the power adapter to
the PrintServer and an
electrical outlet. Click Next.
Click Next.
Click Click Here to Start.
Disconnect the USB printer
cable from the computer, and
disconnect the printer’s power
adapter from the electrical
outlet. Click Next.
Click Next.
G
J
Connect the Ethernet network
cable to your router and the
Ethernet port of the PrintServer.
I
Select the wireless network that
the PrintServer should join. If you
do not see the wireless network
you want to use, click Refresh
and locate the network. Click
Next and go to step N.
If you want to manually enter
the settings for the wireless
network, click Manual Setup.
Click Next and go to step M.
M
If you clicked Manual Setup,
the Configure Wireless Settings
screen appears with the SSID
field. Enter the SSID or name of
the wireless network. Click Next.
K
L
M
2
N
Q
The wireless security method of
your network should be
automatically selected.
Proceed to the instructions for
your wireless security method.
R
If wireless security is disabled,
keep the default, Disabled,
and click Next.
WPA
WPA Pre-Shared Key (TKIP)
Enter a Passphrase (also known
as a Pre-Shared Key) that is 863 characters in length. Click
Next.
T
WEP (128-Bit) or WEP (64-Bit)
Enter a Passphrase and click
Next.
WEP
If you want to manually enter
the WEP key, leave the
Passphrase field blank and
click Next. A new screen will
appear. In the Key 1 field, enter
your WEP key. Click Next.
O
P
Make sure your new settings
are correct. To save the new
settings, click Next.
Disconnect the power adapter
from the PrintServer. Click Next.
S
Disconnect the Ethernet
network cable from the
PrintServer and router. Click
Next.
that you set up your printer and install
your printer’s driver before you install the
PrintServer’s driver.
B
The PrintServer is now
connected to your wireless
network.
Next you need to install the
PrintServer driver on your
computer. Click Set up
Computer.
A
R
C
P
S
Please wait while the printer
drivers are configured for use
with the PrintServer. This may
take two to three minutes.
About - Displays the version number
of the PrintServer diagnostic utility.
B
C
You will be notified when the
installation of the PrintServer is
complete. If you want to print a
test page, click Test Print.
Run the Setup Wizard on the
Setup CD-ROM on your other
computers. Click Click Here to
Start, and then click Set up
Computer.
Congratulations! The installation of
the Wireless-G PrintServer with
Multifunction Support is complete.
connected to the printer for all scans,
faxes, or usage of a memory card. To
connect the computer to the printer,
right-click the icon, and then click
Connect. (The computer will
automatically connect to the printer for
print jobs.)
When you right-click the PrintServer
diagnostic icon, you will see a menu:
Info - Displays the Print Server
Information screen of the diagnostic
utility.
Connect - To scan, fax, or read
information from a memory card
using the software that came with
your multifunction printer, the
computer must be connected to the
printer. To connect to the printer, click
Connect.
When you have finished using the
printer software, right-click the
diagnostic icon, and click
Disconnect.
Click Finish.
E
T
A
The Setup Wizard will install the
PrintServer’s driver and re-install
the printer drivers.
Make sure the printer is
connected to the PrintServer,
and click Next.
D
O
Select the printer connected to
the PrintServer. If you do not
see the PrintServer or printer,
click Refresh. Click Next.
Diagnostic Icon
NOTE: The computer MUST be
Make sure you have no programs
running on your computer.
Q
Use the PrintServer
After you have installed the PrintServer,
the PrintServer diagnostic icon will
appear in the system tray of your
desktop.
NOTE: Linksys strongly recommends
Reconnect the power adapter
to the PrintServer and click
Next.
The next screen will indicate
that the PrintServer is now part
of your wireless network. Click
Next.
Set Up the Computer
D
Exit - Closes the diagnostic utility.
NOTE: For more information about the
diagnostic utility, refer to “Chapter 5:
Using the Diagnostic Utility” of the User
Guide on the Setup CD-ROM.
Diagnostic Menu
For additional information or troubleshooting
help, refer to the User Guide on the CD-ROM or
the Technical Support Insert. You can also e-mail
for further support.
Website
http://www.linksys.com/international
Product Registration
http://www.linksys.com/registration
Linksys is a registered trademark or trademark of
Cisco Systems, Inc. and/or its affiliates in the U.S.
and certain other countries. Copyright © 2006
Cisco Systems, Inc. All rights reserved.
WPSM54G-QI-61018NC JL
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising