Conditioning interface for National Instruments Multifunction DAQ

Conditioning interface for National Instruments Multifunction DAQ
T.Daq
Conditioning interface for
National Instruments
Multifunction DAQ boards
T.Daq is the best price/value solution for the interfacing to
any Data Acquisition board and the conditioning of low
and medium frequency analog signals
MAIN FEATURES:
Analog input channels configurable measure range from
±2mV up to ±50 V
Single power supply DC 18-36 V
16 differential measure channels
Compatible with NI MIO DAQ ( SCSI 68pin and DB37pin), M
series boards.
Fast RJ45 connectors to the field
Expandable with fast prototyping boards, customizations
(piggy-back)
No software required. Completely programmable with
National Instruments NI DAQ MX / LabVIEW software
TECHNICAL SPECIFICATIONS
Specification
Analog Input
Analog Output
Ranges
Description
Min. ±5 mV
Standard : ±5 V , ±10 V
Max: ±50 V
Frequency: DC to 100 kHz
16 channels (the other analog input features,
Standard : ±10 V
2 channels (the analog output features are the
except for the input range, are the ones of the
DAQ board; the Maximum Analog input range is
linked to hardware configuration)
ones of the DAQ board)
Digital I/O
Standard: 0-5 V
24 channels (the I/O features are the ones of
the DAQ board)
Power
Dimensions
Min. 18 V DC
Typical : 24 V DC
Max: 36 V DC
Power consumption: 5 W max
LxHxD : 195 x 45 x 120 mm
www.ttech.to.it
T.Daq
EXPANSION AND MODULARITY
T.Daq board can be connected to Ttech T.Dio
board to achieve a compact and complete
solution to the interfacing of both analog and
digital signals.
The connection between the boards is made
with a common 50-way flat cable, available on
request.
The T.Daq and T.Dio modularity allow the
realization of several “turnkey” configurations
for signal conditioning and data acquisition,
without the need of complex cabling.
APPLICATIONS
The coupling between T.Daq and T.Dio allows to
take advantage of all the resources of a DAQ
card without thinking about the design of the
signal conditioning.
Laboratory automation
Data acquisition systems
Testing machines
Automation control
Automatic measurement systems
CONFIGURATION EXAMPLES
Configuration
Daq board
T.Daq
T.Dio
Description
16 Analog input
2 Analog output
8 Digital input
16 Digital output
NI 6221
NI 6251
1
1
Small channels count systems, either analog and digital,
small applications with little automation
32 Analog input
4 Analog output
16 Digital input
32 Digital output
NI 6229
NI 6259
2
2
Substitute for high number channels measure systems,
with high I/O number
8 Digital input
16 Digital output
NI 6503
DIO 24
1
Small automation
32 Digital input
64 Digital output
NI 6509
DIO96
4
Machine automation with higher I/O signal count
Ttech - testing technologies srl - via Bard 64/A -tel +39 011 7680289 - www.ttech.to.it
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising