PDF - This Chapter

PDF - This Chapter
Phone Customization and Settings
• Home Screen, page 1
• Lock Screen, page 3
• Change Ringtone, page 5
• Adjust Phone Ringer Volume, page 6
• Change Phone Screen Brightness, page 6
• Cisco Unified Communications Self Care Portal, page 6
• AnyConnect VPN, page 7
Home Screen
The home screen uses a landscape orientation. Place widgets and shortcuts anywhere on the home screen.
Work Spaces
Multiple work spaces are available for you to set up. Each work space holds a variety of widgets and shortcuts
in any configuration.
Navigate Work Spaces
Procedure
Swipe left or right on an open space on the home screen to go to the work space to the left or to the right.
Set Up Home Screen
Add applications, widgets, and folders, or change your wallpaper to set up your home screen.
Cisco Desktop Collaboration Experience DX650 User Guide, Release 10.1(1)
1
Phone Customization and Settings
Set Up Home Screen
Add Application Icon to Home Screen
Procedure
Step 1
Step 2
Step 3
Tap
.
Tap and hold an application.
Drag the application icon to an empty space on any of the home screen work spaces.
Widgets
Widgets are small applications that you can place on the home screen. Widgets provide at-a-glance information
and some functions from full applications.
The following table describes some of the widgets that your phone includes.
Calendar
Display upcoming events.
Cisco Clock
Display an analog clock.
Cisco WebEx Meetings Display upcoming WebEx meetings.
Contact
Display an icon for one of your contacts. Tap the icon to open the Quick Contact
Badge for that contact.
Digital Clock
Display a digital clock.
Direct Dial
Display an icon for one of your contacts. Tap the icon to call that contact.
Email
Display recent email messages.
Favorites
Display your favorite contacts.
Phone
Display all recent calls, missed calls, messages, or speed dials.
Phone Features
Toggle these features on or off: Forward All, Privacy, Do Not Disturb, Mobility
and Self-View.
Cisco Desktop Collaboration Experience DX650 User Guide, Release 10.1(1)
2
Phone Customization and Settings
Lock Screen
Add Widget to Home Screen
Procedure
Step 1
Step 2
Step 3
Step 4
Tap
.
Tap Widgets.
Tap and hold a widget.
Drag the widget to an empty space on any of the home screen work spaces.
Move Widget or Icon
Procedure
Drag the widget or icon to an empty space on the home screen. Drag a widget or icon to either side of the
screen to place the widget or icon on another work space.
Remove Widget or Icon
Procedure
Step 1
Step 2
Tap and hold the widget or icon.
Drag the widget or icon up to Remove. The widget or icon is deleted and Remove disappears.
Change Wallpaper
Procedure
Step 1
Step 2
Step 3
Tap and hold an open space on the home screen.
Tap Wallpapers.
Select a wallpaper.
Lock Screen
The Lock screen is displayed when the phone is locked (inactive).
Cisco Desktop Collaboration Experience DX650 User Guide, Release 10.1(1)
3
Phone Customization and Settings
Unlock Screen
Use a PIN or password to unlock your phone. Your PIN or password is stored on the phone, and it is not the
same as a PIN or password for any other service.
You can set the amount of time that your phone can be inactive before the screen locks. Your system
administrator may disable the screen lock during your work hours.
By default, the home screen is displayed when you unlock your phone. You can configure your phone to
unlock to the Call application.
Unlock Screen
Procedure
Step 1
Enter your PIN.
Step 2
Press # or tap Unlock.
Place Emergency Call From Lock Screen
Procedure
Step 1
Step 2
Tap ?.
Tap Emergency call.
Reset Lost PIN or Password
Procedure
Step 1
Step 2
Step 3
Step 4
Tap ?.
Tap Forgot PIN or Forgot Password.
Select a Cisco Unified Communications Manager or Google™ account and enter your credentials. You can
only select an active account.
Reset your PIN or password. Your phone is now unlocked and your new PIN or password is ready to use.
Cisco Desktop Collaboration Experience DX650 User Guide, Release 10.1(1)
4
Phone Customization and Settings
Display the Call Application on the Lock Screen
Display the Call Application on the Lock Screen
Procedure
Step 1
Step 2
Step 3
In the Settings application, tap Security.
Tap Default App.
Tap Display phone app on lock screen.
Set Screen Timeout
Procedure
Step 1
Step 2
Step 3
In the Settings application, tap Security.
Tap Automatically Lock.
Select the length of time that your phone can be inactive before the screen locks. Note that your security
settings may limit your screen timeout choices.
Change Ringtone
Procedure
Step 1
Step 2
Step 3
Step 4
In the Settings application, tap Sound.
Tap Phone Ringtone.
Tap a ringtone to play a sample of it.
Select a ringtone and tap OK.
Cisco Desktop Collaboration Experience DX650 User Guide, Release 10.1(1)
5
Phone Customization and Settings
Add Custom Ringtone
Add Custom Ringtone
Procedure
Step 1
Step 2
Connect your phone to a computer with a microUSB cable.
Copy an MP3 file to the Alarms folder.
Adjust Phone Ringer Volume
Check with your system administrator to see if a minimum ringer volume setting was configured.
Procedure
Press
while the handset is in the cradle and the headset and speakerphone buttons are off. The
new ringer volume is saved automatically.
Change Phone Screen Brightness
Note
If you change the brightness setting on your phone, do not unplug the phone from its power source for at
least one minute or the brightness setting will not get saved.
Procedure
Step 1
Step 2
Tap Settings.
To make adjustments, slide the brightness indicator up or down.
Cisco Unified Communications Self Care Portal
See the Cisco Unified Communications Self Care Portal User Guide for information about how to use Unified
Communications Self-Care Portal to configure user settings for your phone.
Cisco Desktop Collaboration Experience DX650 User Guide, Release 10.1(1)
6
Phone Customization and Settings
AnyConnect VPN
AnyConnect VPN
Your system administrator sets up the AnyConnect VPN application. AnyConnect VPN allows you to have
secure remote access to corporate resources on your phone. For security reasons, the usual recommendation
is that you connect to a VPN through a wired network connection.
If your system administrator has set up a VPN connection profile for you with Cisco Unified Communications
Manager, the profile appears in the VPN Connection list. You cannot edit or delete these VPN connections.
Your system administrator can enable you to create and edit your own VPN connections.
AutoNetDetect
If your system administrator enables the AutoNetDetect feature for a VPN connection profile that is set up
with Cisco Unified Communications Manager, your phone automatically attempts to establish a VPN
connection.
Password Persistence
If your system administrator enables the Password Persistence feature for a VPN connection profile that is
set up with Cisco Unified Communications Manager, the AnyConnect VPN application stores a previously
successful password. You cannot change a working password.
Add VPN Connection Profile
Procedure
Step 1
Step 2
Step 3
Step 4
Step 5
In the Settings application, tap More....
Tap VPN.
Tap Add VPN Network.
Enter a description and the server address.
Tap Save.
Cisco Desktop Collaboration Experience DX650 User Guide, Release 10.1(1)
7
Phone Customization and Settings
Edit VPN Connection Profile
Edit VPN Connection Profile
Procedure
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
In the Settings application, tap More....
Tap VPN.
Tap and hold a VPN connection.
Tap Edit Network.
Edit the connection description or server address.
Tap Save.
Connect to VPN
Procedure
Step 1
Step 2
Step 3
Step 4
In the Settings application, tap More....
Tap VPN.
Tap and hold a VPN connection.
If necessary, do either of the following in response to the appropriate prompts:
• Enter your credentials. If prompted to do so, also enter your secondary credentials to support double
authentication.
• Tap Get Certificate, then enter the certificate enrollment credentials that your system administrator
supplies. AnyConnect saves the certificate and reconnects to the VPN secure gateway to use the certificate
for authentication.
Step 5
Tap Connect.
Cisco Desktop Collaboration Experience DX650 User Guide, Release 10.1(1)
8
Phone Customization and Settings
Disconnect From VPN
Disconnect From VPN
Procedure
Step 1
Step 2
Step 3
Step 4
In the Settings application, tap More....
Tap VPN.
Tap and hold a VPN connection.
Tap Disconnect.
Delete VPN Connection Profile
Procedure
Step 1
Step 2
Step 3
Step 4
In the Settings application, tap More....
Tap VPN.
Tap and hold a VPN connection.
Tap Delete Network.
Optimize Video Call Experience Over VPN
Adjust video bandwidth settings to optimize the video call experience over VPN. A bandwidth of 1.5 Mbps
is required for 720p video resolution. Lower bandwidth settings result in lower video resolution.
Note
Throughput varies over time, due to factors like other traffic being shared on the network, or even time
of day. These variations can affect the video experience.
Procedure
Step 1
Step 2
Disconnect from VPN.
Run a speed test for the phone, and make a note of the upload speed in the test results.
Cisco Desktop Collaboration Experience DX650 User Guide, Release 10.1(1)
9
Phone Customization and Settings
Optimize Video Call Experience Over VPN
Step 3
Step 4
Step 5
Step 6
Step 7
Speed test applications, such as Internet Speed Test by Speed A.I. are available in Google Play Store.
Reconnect to VPN.
In the Call application, tap
.
Tap Settings.
Tap Video bandwidth.
Select a video bandwidth that is lower than the upload speed in the speed test results.
Cisco Desktop Collaboration Experience DX650 User Guide, Release 10.1(1)
10
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising