GOT SIMPLE

GOT SIMPLE
Mitsubishi Electric Graphic Operation Terminal
GS2110-WTBD
Backlight
Touch Qanel
Memory
TyQe
Key size
Simultaneous
Qress
Life
C drive
RS-422
RS-232
Built-in
interface
Ethernet
USB
SD card
Buzzer outQut
Protective structure
ComQatible software Qackage
Mitsubishi industrial devices interaction solutions
In addition to various built-in functions, direct connection between Mitsubishi industrial devices will improve productivity and reduce costs.
10
214
GS2107-WTBD
10"
800 × 480 [dots]
222(8.74)(W) × 132.5(5.22)(H) [mm]
(inch)
(Horizontal format)
7"
154(6.06)(W) × 85.9(3.38)(H) [mm]
(inch)
(Horizontal format)
197
Panel thickness: 1.6mm to 4mm
16-dot standard font: 50 chars. × 30 lines (2-byte) (Horizontal format)
65536 colors
LED (not reQlaceable)
Backlight off/screen saving time can be set.
Analog resistive film
Minimum 2 × 2 dots (Qer key)
Simultaneous Qress Qrohibited (only 1 Qoint can be Qressed)
1 million times (oQerating force 0.98N or less)
Flash memory (internal) (9MB), for storing Qroject data, OS
Life (No. of writings) 100,000 times
RS-422, 1ch
Transmission sQeed: 115200/57600/38400/19200/9600/4800bQs
Connector shaQe: D-Sub 9Qin (female)
AQQlication: For communication with controllers
Terminating resister: 330 Ω fixed
RS-232, 1ch
Transmission sQeed: 115200/57600/38400/19200/9600/4800bQs
Connector shaQe: D-Sub 9Qin (male)
AQQlication: For communication with controllers and a barcode reader
For connecting a Qersonal comQuter (Project data read/write,
FA transQarent function)
Data transfer method: 100BASE-TX, 10BASE-T, 1ch
Connector shaQe: RJ-45 (modular jack)
AQQlication: For communication with controllers
For connecting a Qersonal comQuter (Project data read/write,
FA transQarent function)
USB (Full SQeed 12MbQs), 1ch
Connector shaQe: Mini-B
AQQlication: For connecting a Qersonal comQuter (Project data read/write,
FA transQarent function)
SD comQliant, 1ch
SuQQorted memory card: SDHC memory card, SD memory card
AQQlication: Project data read/write, logging data save
Single tone (LONG/SHORT/OFF adjustable)
IP65F (Only the front Qart of the Qanel)
272(10.71)(W) × 214(8.43)(H) ×
206(8.11)(W) × 155(6.11)(H) ×
56(2.21)(D) [mm](inch)
50(1.97)(D) [mm](inch)
AQQrox. 1.3kg (excl. mounting
AQQrox. 0.9kg (excl. mounting
brackets)
brackets)
Version 1.104J or later * (English Version)
*: Installation of GS installer is required.
56
153
257
■ GS2107-WTBD
50
206
26
144
144
Panel thickness: 1.6mm to 4mm
35.8
154.2
190
■ Panel cutting dimensions
Open an installation hole on the control panel with the dimensions as shown below.
For the mounting brackets, space of 10mm is required above the top and below the bottom of the hole.
· Horizontal format (Rotate the image 90 degree for vertical format)
+2
A -0
10mm
or more
Q GS installer installation Qrocedure
1. Double click the GS Installer (GS Installer.exe) in the folder of GT Works3 Ver. 1.104J or later. OQerate the
Qersonal comQuter in accordance with instructions given on the screen.
2. When the comQletion screen aQQears, click the [Finish] button to finish installing the GS Installer.
Control
Thickness: 1.6mm to 4mm
[Storage Qlace]
CD-ROM:<Root>\TOOL\GS\GS Installer.exe
DVD-ROM:<Root>\Disk1\TOOL\GS\GS Installer.exe
The MELSEC Series has been designed
based on a passion for monozukuri
(creation), trustworthy technology and
reliability. This concept also applies to
system installation and operation.
With various I/O functions as standard
inclusions, the MELSEC Series serves
to improve work efficiency by realizing
convenience, ease-of-use, and diverse
control.
Model
10mm
or more
For more details, Qlease refer to the included
manual.
For safe use
Positioning
Drive
Mitsubishi Servo System - advanced and flexible.
Mitsubishi servo has a variety kind of motors (rotary,
linear and direct drive
*
motors) in order to
achieve the best
machine performance.
A diverse product range helps you make
the right product choice. An inverter can
be used to easily change rotating speed
of three-phase induction motor. Environmentally friendly, high-performance
inverters also support global standards.
You can choose the best one from a
variety of line-up in accordance with the
application.
GOT SIMPLE
TFT color LCD
B +2
-0
Interaction with various industrial devices
Weight
New Product Release
Graphic Operation Terminal
155
Number of
characters
DisQlay color
272
197
6
Debug functions Device monitor
MELSEC-FX list editor
DisQlay size
35
6
DisQlay
section
56
SQecifications
Item
DisQlay
device
Screen size
Resolution
Unit: mm
■ GS2110-WTBD
Conforms to IEC61000-4-4, 2kV (Qower suQQly line)
350VAC for 1 minute between Qower suQQly and ground
10MΩ or higher with an insulation resistance tester (500VDC between
Qower suQQly terminal and ground)
Q Performance sQecifications
External dimensions
á : Connection with GOT SIMPLE will be supported soon.
GS2110-WTBD
GS2107-WTBD
24VDC (+10%, -15%), riQQle voltage 200mV or less
7.6W (317mA/24V) or less
6.5W (271mA/24V) or less
3.8W (158mA/24V) or less
3.8W (158mA/24V) or less
17A or less (6ms, 25°C, maximum load)
Within 5ms
151
Power suQQly voltage
Power consumQtion
With backlight off
Inrush current
Allowable momentary Qower
failure time
Noise immunity
Withstand voltage
Insulation resistance
199
Base screen
Overlap window
Superimpose window
Dialog window
Key window
Language switching
System information
Security
Startup logo
FA transparent
Multi-channel function
Station No. switching
Backup/Restore Coming soon
10
GOT functions
SQecifications
10
Figure/object functions
Figure
Logo text
Touch switch
Lamp
Numerical display, Numerical input
Text display, Text input
Date display, Time display
Comment display
Parts display
Parts movement
Historical data list display Coming soon
Simple alarm display
Alarm display (user)
Level
Panelmeter
Line graph
Trend graph
Bar graph
Statistic bar graph
Statistic pie graph
Scatter graph
Historical trend graph
Functions performed on background
of GOT
Logging
Recipe
Device data transfer
Trigger action
Time action
Hard copy
(File output/Serial printer output)
Project/screen script
Functions used with peripheral devices
Barcode function
RFID function Coming soon
Report function (Serial printer
output) Coming soon
Item
136
112
Screen design
Q External dimensions
Q Power suQQly sQecifications
10
GOT SIMPLE function list
A
B
GS2110-WTBD
258
200
GS2107-WTBD
191
137
The actual disQlay may differ from what are shown on GOT screen images in this catalog.
Trademarks and registered trademarks
• To use the Qroducts given in this document QroQerly, always read the related manuals before
starting to use them.
• Please note that reQair service of this Qroduct is different from other Qroducts.
• ETHERNET is a registered trademark of Xerox CorQ.
• SD and SDHC Logos are registered trademarks or trademarks of SD-3C, LLC.
• Other Qroduct and comQany names are either trademark s or registered trademark s of their
resQective owners.
Standard interfaces
RS-422
RS-232
Ethernet
SD card slot
7
inch WVGA 800×480 dots
HEAD OFFICE: TOKYO BUILDING, 2-7-3, MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN
NAGOYA WORKS: 1-14, YADA-MINAMI 5, HIGASHI-KU, NAGOYA, JAPAN
á
L(NA)08284ENG
Specifications are subject to change without notice. New publication, effective March 2014
GS2107-WTBD
10
inch WVGA 800×480 dots
GS2110-WTBD
Mitsubishi New Widescreen Graphic Operation Terminal
10 inch
7 inch
Debut
Simple, high functioning, and user friendly model for a reliable system.
Logging function
GOT SIMPLE collects the data from multiple
devices!
SD card slot
SDHC compliant
for large volume
data
GOT SIMPLE manages the data of all
connected industrial devices. The data can
be collected at an arbitrary timing and can
be used for data analysis and feedback.
Start from memory card
Historical trend graph
•
•
Useful for replacement or maintenance of
GOT SIMPLE
The data collected by the logging function can be displayed in a graph.
The data can be checked easily by scrolling or specifying time.
Startup on-site
without special knowledge
Mass production
Transfer the screen data and all
of equipment
the necessary system data to
make a GOT SIMPLE operate
to a memory card in advance.
By just inserting the memory
card, the GOT SIMPLE can be
Copy the data to
started quickly.
GOT SIMPLE
GOT SIMPLE
SD cards in your
office
FX3 Series
GOT SIMPLE
GOT SIMPLE
FA transparent function
Sequence programs and parameters can easily
be modified at the worksite
USB device
The GOT SIMPLE acts as a transparent gateway to
enable programming, start up, and adjustment of
Mitsubishi industrial devices. Users do not have to
bother with changing cable connections.
Compact Mini-B
connector
GOT SIMPLE
GOT SIMPLE screens can be designed with
Ethernet port
WVGA 800×480 dots
Multi-channel with
various equipment
7
inch GS2107-WTBD
WVGA 800×480 dots
GOT SIMPLE
Use GOT SIMPLE to control industrial devices!
Up to 2 industrial devices can be controlled with
one GOT SIMPLE. The data can be easily
transferred between devices with just simple
settings in GT Works3.
Serial communication,
etc.
Mitsubishi industrial
devices
Multi-channel function
10 inch GS2110-WTBD
Easily installed on compact equipment!
By using a GOT SIMPLE vertically, it can be
easily installed on compact equipment and
can neatly display vertical letters.
GT Works3 Ver.1.104J or later.
USB or
Ethernet
GOT SIMPLE can be installed vertically.
Ethernet
RS-422
or
RS-232
Recipe function
Convenient for frequent changeover
QCPU
RS-422,
RS-232
Major functions
Built-in
RS-422, RS-232 ports
Built-in Ethernet port
Built-in USB device port
Built-in SD card slot
IP65F
Protective structure
Vertical display
TFT 65536 colors
Communication
ports
Convenient for minor onsite program changes
GOT SIMPLE allows minor program changes onsite.
MELSEC-FX series PLC sequence programs can
be edited in list format.
MELSEC-FX programs can be edited
only by using a GOT SIMPLE
GOT SIMPLE
D1000------200
Enhanced security control using password control
D1001------100
D1002------ 50
D1003------ 180
MELSEC-FX list editor screen
Operator authentication function
Product A recipe
-------
User memory 9MB
MELSEC-FX list editor
Recipe information such as material blend and
machine conditions are saved in the GOT
SIMPLE. This information can be written from the
GOT SIMPLE to programmable controllers.
Adjusted data can also be read and stored in the
GOT SIMPLE.
-------
Resolution WVGA
800×480 dots
FX3 Series
Write
Read
FX3 Series
Setting the level (authority) of
operation and display for each
operator can strengthen
security and prevent operation
errors.
Operator name
⃝ ×□ △ ⃝ ×□ △
Password
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising