Power Switch LIGHTED

Power Switch LIGHTED
Connecting Pegs
Please read this manual before you begin!
Failure to follow this manual’s instructions may
result in damage to the Power Base and/or Laser
Pegs®. Not adhering to these instructions will
void the manufacturer’s warranty. Packaging
must be kept because it contains important
information.
9100
POWER BLOCK
CAR SERIES
WARNING:
For Boys And Girls
Ages 5 And Up
POWER BLOCK
The Power Block is a Power Base that allows you to build with Laser Pegs®
and construction parts to build models that light up. It is battery operated.
(BATTERIES NOT INCLUDED.)
CHOKING HAZARD-Small parts.
Not for children under 3 yrs.
Do not submerge in water.
8 Models+
Any creation you can build
To construct with Laser Pegs®, slide two pieces together to form
a connection. Slide each piece on and off smoothly.
LIGHTED
Laser Pegs®
Connections
MOBILE POWER BLOCK™ SET
INCLUDES:
• 83 Construction Parts
• 4 Tire Pegs
• 2 Square M-M Pegs
• 1 Mobile Power Block™
Requires 3 AAA Batteries
Allows you to construct
with Laser Pegs®.
Construction Compatible
Construction Part Connections
Allows you to connect to other
construction kits.
Compatible with other construction kits
Batteries NOT
Included
Replacing Batteries
1. Remove Screw.
2. Lift off Battery Compartment Cover.
3. Place three (3) AAA batteries in the correct
position - as displayed inside of the
Power Block.
4. Replace Battery Compartment Cover and
Screw.
5. Move Power Switch setting to
OFF/ON/FLASH.
6. Do not mix old and new batteries.
7. Do not mix alkaline, standard (carbonzinc), or rechargeable (nickel-cadmium,
NiMH) batteries!
8. Exhausted batteries are to be removed
from the power base.
9. Never connect more than 150 Laser Pegs® at
one time!
10. Non-rechargeable batteries are not to be recharged.
11. Rechargeable batteries are only to be recharged under adult supervision.
12. Rechargeable batteries are to be removed
from the toy before being recharged.
13. Batteries are to be inserted with the
correct polarity.
14. The supply terminals are not to be shortcircuited.
Screw
Battery
Compartment
Cover
Remove the Phillips head screw
with a 4mm screw driver.
Requires 3-AAA Batteries
Batteries NOT
Included
Requires 3-AAA Batteries
EN71, RoHS COMPLIANT
This product complies to
all safety requirements
of ASTM F 963
Battery
Compartment
Connecting the Laser Pegs® Tire to the Axle Peg
Place Axle Peg
through the Tire
MODEL INSTRUCTIONS
Tire Peg
All additional model instructions can
be downloaded at www.LaserPegs.com
Power
Switch
Laser Pegs® Parts List
Move the Power Switch to
cycle through the Power
Block light settings.
x2
Battery
Compartment
Tire
Requires 3-AAA Batteries
(Batteries Not Included)
OFF/ON/FLASH
Axle Peg
SQUARE
M-M PEG
POWER BLOCK™
Allows you to connect to
both Laser Pegs® and other
construction kits.
TIRE PEG
AVOID DAMAGE TO PEG HOLES
Use the Laser Pegs® Square M-M Peg to attach
the Tire Pegs to the Power Block™.
MOBILE POWER BLOCK™
x4
Laser Pegs® Square M-M Peg
Tire Peg
*To avoid short-circuits, keep metal objects and
other unauthorized materials from obstructing
the peg holes.
Each Laser Peg® is color coded on the circuit board inside
each shape.
Color
Code
Construction Parts List
x4
x2
x4
x4
x5
x2
x1
x10
x6
x2
x6
x2
x2
x5
x2
x2
x5
x2
LIGHT SETTINGS
OFF - Turns lights OFF
ON - Turns lights ON
FLASH - Makes lights FLASH
x5
x3
x4
x5
www.LaserPegs.com
This manual is copyright and cannot be reproduced or used online without Laser
Pegs®Ventures LLC permission. Copyright 2013 © All Rights Reserved US Patent
#7,731,558 Additional Global & Multiple Patents Pending. Laser Pegs® Ventures
LLC. 8304 Consumer Ct., Sarasota FL 34240. Contact: Support@LaserPegs.com
WARNING! Each Laser Peg® draws current from the batteries. Therefore, the more
pegs you use, the quicker you will deplete your battery power! As the power
weakens, the current will slowly fail and some Laser Pegs® will illuminate (typically
the reds and yellows) and some won’t. When the Laser Pegs® dim, the Laser Pegs®
are not broken, they just need stronger batteries.
You have 2 simple options...
1. Change the batteries.
2. Use high quality batteries. They will last a little longer, but they will still deplete rapidly the more Laser Pegs® you connect!
Never connect more than 150 Laser Pegs®
to the Power Block at one time.
MOBILE POWER
BLOCK™
truck hot rod: In Europe, all trucks are fitted with a speed limiter set to 56 miles per
hour or less.
Truck hot Rod
B
Model
Difficulty
Level
STEP
4
A
STEP
1
STEP
5
STEP
2
STEP
6
STEP
3
STEP
7
STEP
9
STEP
12
STEP
10
STEP
13
COMBINE
A
STEP
8
STEP
11
www.LaserPegs.com
Copyright 2013© All Rights Reserved Global & Multiple Patents Pending.
US Patent #7,731,558
STEP
STEP
14
17
STEP
20
STEP
STEP
15
18
STEP
21
STEP
16
STEP
19
www.LaserPegs.com
Copyright 2013© All Rights Reserved Global & Multiple Patents Pending.
US Patent #7,731,558
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising