Video Generator / Protocol Analyzer Module

Video Generator / Protocol Analyzer Module
SPECIFICATIONS
DisplayPort Tx and Rx Ports
Version
Standard Formats
Connectors
Protocol
Video Data Rates
Color Depths
Video Encoding
Video Sampling Modes
HDCP
Audio
Capture memory
DisplayPort 1.2
VESA
Tx (2) DP Standard; Rx (1) DP Standard
DisplayPort
1.62, 2.70, 5.40 Gb/s Link rates
1, 2, 4 Lanes
8, 10, 12, 16 bits
RGB, YCbCr
4:4:4, 4:2:2
Versions 1.3 & 2.2
8 Channel LPCM programmable sine wave
4 GBytes
quantumdata 980
TM
DisplayPort Video Generator
/ Protocol Analyzer Module
Video Generation and Analysis
Testing up to 5.4Gb/s Link Rates
Key Features
Options
Either or both:
- DP Tx for display testing
DisplayPort Tx / Rx
- DP Rx port, two options:
- Basic Analyzer
- Protocol Analyzer (requires Basic analyzer option)
Monitor DisplayPort Aux Channel transactions in real time either while emulating a
DP Aux Channel Analyzer
source or sink
DP HDCP 2.2 Compliance
Run HDCP 2.2 compliance test on DisplayPort sources, sinks and repeaters
DP 1.2 Link Layer Compliance
Run DisplayPort 1.2 Core Link Layer compliance test on sinks (displays)
Compliance Reduced Lane Count Compliance test for reduced lane count

Run functional tests on DisplayPort
displays and monitors up to 5.4
Gb/s link rates with standard format
library consisting of 600 standard
timings and over 300 test patterns

Run VESA Reduced Lane Count
compliance tests on DisplayPort
sources and displays

Run HDCP 2.2 compliance tests on
DisplayPort sources, sinks and
repeaters

NEW! Run DP 1.2 Core Link Layer
compliance tests on DisplayPort
sinks

View EDID and DPCD registers of
connected display to verify
contents
980 Test Platforms
Embedded Display
Power
Weight
Size
Command Line Control
Environmental
980B: 15” diagonal; Resolution: 1024(H); x 768 (V) resolution; 24 bit RGB color.
980R: 7” diagonal: Resolution: 800 (H) x 480 (V); 24 bit RGB color.
90-264 VAC, 47-63Hz
23.76 LBS; 10.78 Kg
980B: Height: 15.25 in. (38.7 cm) Width: 14.57 in. (36.5 cm) Depth: 6.29 in. (15.9 cm)
980R: Height: 6.29 in. (15.9 cm); Width: 15.25 in. (38.7 cm); Depth: 14.57 in. (36.5 cm)
Ethernet (RJ-45) for external GUI and telnet
Operating Temp: 32 to 104 (F); 0 to 40 (C)
1-800-909-7211
teledynelecroy.com
Local sales offices are located throughout the world.
Visit our website to find the most convenient location.
©2017 Teledyne LeCroy. All rights reserved. Specifications, prices, availability and delivery subject to change without notice.
Product or brand names are trademarks or requested trademarks of their respective holders.
v0329

Configure link training parameters
to test display’s handling of various
link training configurations

Run audio tests using
programmable LPCM sine wave
audio tones

Monitor Link training, HDCP and
EDID over the Aux Channel with the
Auxiliary Channel Analyzer feature

Capture and decode main link
metadata including main stream
attributes and secondary data.

View incoming video and metadata
in real time
The Teledyne LeCroy quantumdata 980 DP1.2 Video Generator / Analyzer
module supports video, audio and protocol functional testing of high-end
DP displays and sources. The module supports HBR2 data rates including
1.63, 2.70 & 5.40 Gb/s on 1, 2 & 4 lanes on both its Tx ports and its Rx port.
The module features two DisplayPort 1.2 outputs—both active
simultaneously—for testing displays with multiple DisplayPort inputs. The
DP1.2 module is equipped with all the standard video timings and test
patterns necessary for testing modern displays.
The 980 DP Video Generator / Protocol Analyzer module can be equipped
in either the 980B or 980R Advanced Test Platform. The module can be
controlled either through the PC-based 980 GUI Manager or through the
embedded 980 GUI Manager running on the 980 platform itself. The 980's
built-in color touch screen provides a graphical user interface (GUI) to
control the module.
Source Testing
Display Testing
The DP 1.2 module’s optional Rx
analyzer port emulates a DisplayPort
1.2 display device including EDID and
DPCD emulation, Rx Link Training
function and MST Rx function. The
analyzer supports HDCP 2.2
compliance testing for DisplayPort 1.2
source devices. There are two options
for the analysis function for testing DP
1.2 source devices:
• Basic Analyzer – Provides real time
viewing of video and metadata for
functional testing.
• Protocol Analyzer – Provides
capture and store of the main link
including main stream attributes
and secondary data.
The 980 DP1.2 Video Generator module
supports video, audio and protocol
functional testing high-end DP 1.2
displays. The module supports HBR2
data rates including 1.63, 2.70 & 5.40
Gb/s on 1, 2 & 4 lanes on both its Tx
ports and its Rx port. The module
features two DisplayPort 1.2 outputs—
both active simultaneously for testing
displays with multiple DisplayPort
inputs. The DP module is equipped with
all the standard video timings and test
patterns necessary for testing modern
displays.
The DP video generator also supports
HDCP 2.2 compliance testing for
DisplayPort sink devices and link layer
compliance testing for sink 1.2 devices.
DISPLAY TESTS - VIDEO PATTERN TESTING FOR UHD TVS
Video Testing
The 980 DP Video Generator / Analyzer module supports
video and audio functional testing at link rates up to 5.4
Gb/s on 1, 2 and 4 lanes to support high resolution formats.
The 980 DP Video Generator / Analyzer module has an
extensive set of video formats and library of test patterns.
You can set any pattern in motion to test motion artifacts
with the Image Shift feature.
980 with
DP Video Generator /
Analyzer module
Format Selection
DISPLAY TESTS - PROTOCOL TEST FEATURES
Protocol Testing
The 980 DP Video Generator module offers a variety of features
for testing DisplayPort protocols. You can verify HDCP 1.3 and
optionally HDCP 2.2 authentication transactions between the
module’s Tx port and a DP 1.2 display. The module’s EDID
Decode feature enables you to examine the EDID of the
connected display in text. The DPCD Decode feature enables you
to examine the DPCD registers of the connected display. You can
read the EDID and/or the DPCD of downstream MST nodes.
980 with
DP Video Generator /
Analyzer module
DisplayPort Monitor
EDID Decode View
DisplayPort Monitor
SCDC Register View
Test Pattern Selection
Test Setup for Sink Test
Test Setup for Sink Test
Link Training Control and Configuration
Multi-Stream Transport
The module’s link training control feature enables you to
configure the link training parameters during testing. You
can set limits on the lane count and link rate and allow the
link training engine to establish link training based on those
limitations or you can force link training parameters—lane
count, link rate, voltage swing, pre-emphasis.
The DP1.2 Video Generator module emulates an MST source
for testing an MST branch device or MST-capable monitor.
Up to four (4) streams are supported with a depth of one.
The Auxiliary Channel Analyzer (ACA) utility depicts the MST
negotiations with the connected MST Rx device.
Auxiliary Channel Analyzer
Audio Testing
The 980 DP Video Generator / Analyzer module’s Auxiliary
Channel Analyzer (ACA) feature enables you to monitor the DP
Aux Channel for link training and MST negotiations, HDCP
transactions and EDID exchanges between the module and a
connected display. The ACA logs these events and assigns
precise timestamps to them. You can view the details of each
transaction. These ACA logs can be saved and disseminated for
further analysis by colleagues and other subject matter experts.
The module offers a programmable LPCM audio sine wave
generator enabling you to set the number of channels (up
to 8), the amplitude, frequency, sampling rate and bit
depth for uncompressed formats.
LPCM Audio Testing
Link Training Control and Configuration
Aux Channel Analyzer
HDCP 2.2 Test
DISPLAY TESTS - VIDEO PATTERN TESTING FOR UHD TVS
Video Testing
The 980 DP Video Generator / Analyzer module supports
video and audio functional testing at link rates up to 5.4
Gb/s on 1, 2 and 4 lanes to support high resolution formats.
The 980 DP Video Generator / Analyzer module has an
extensive set of video formats and library of test patterns.
You can set any pattern in motion to test motion artifacts
with the Image Shift feature.
980 with
DP Video Generator /
Analyzer module
Format Selection
DISPLAY TESTS - PROTOCOL TEST FEATURES
Protocol Testing
The 980 DP Video Generator module offers a variety of features
for testing DisplayPort protocols. You can verify HDCP 1.3 and
optionally HDCP 2.2 authentication transactions between the
module’s Tx port and a DP 1.2 display. The module’s EDID
Decode feature enables you to examine the EDID of the
connected display in text. The DPCD Decode feature enables you
to examine the DPCD registers of the connected display. You can
read the EDID and/or the DPCD of downstream MST nodes.
980 with
DP Video Generator /
Analyzer module
DisplayPort Monitor
EDID Decode View
DisplayPort Monitor
SCDC Register View
Test Pattern Selection
Test Setup for Sink Test
Test Setup for Sink Test
Link Training Control and Configuration
Multi-Stream Transport
The module’s link training control feature enables you to
configure the link training parameters during testing. You
can set limits on the lane count and link rate and allow the
link training engine to establish link training based on those
limitations or you can force link training parameters—lane
count, link rate, voltage swing, pre-emphasis.
The DP1.2 Video Generator module emulates an MST source
for testing an MST branch device or MST-capable monitor.
Up to four (4) streams are supported with a depth of one.
The Auxiliary Channel Analyzer (ACA) utility depicts the MST
negotiations with the connected MST Rx device.
Auxiliary Channel Analyzer
Audio Testing
The 980 DP Video Generator / Analyzer module’s Auxiliary
Channel Analyzer (ACA) feature enables you to monitor the DP
Aux Channel for link training and MST negotiations, HDCP
transactions and EDID exchanges between the module and a
connected display. The ACA logs these events and assigns
precise timestamps to them. You can view the details of each
transaction. These ACA logs can be saved and disseminated for
further analysis by colleagues and other subject matter experts.
The module offers a programmable LPCM audio sine wave
generator enabling you to set the number of channels (up
to 8), the amplitude, frequency, sampling rate and bit
depth for uncompressed formats.
LPCM Audio Testing
Link Training Control and Configuration
Aux Channel Analyzer
HDCP 2.2 Test
SOURCE TESTS – CAPTURE & DECODE, PIXEL ERROR
Capture and Decode
The 980 DP Video Generator / Analyzer
module captures and decodes the main link
attributes in order to diagnose interoperability
issues related to them. The Protocol Analyzer
captures and stores main link data and
provides visibility into main stream attributes,
secondary data elements, K-Characters and
protocol errors. The Protocol Analyzer
presents these elements on a graphical
timeline and in a table. You can search for
data and select any transaction in the table to
view its details. The capture utility also
enables you to capture specific MST streams
from the source.
Capture and Decode (Filter View)
Real Time Analysis (Basic Analyzer)
The 980 DP Video Generator / Analyzer module ’s
Real Time analysis feature enables you to view the
incoming video, lanes and link rate, timing,
colorimetry and various other metadata in real time at
a glance. The Real Time mode provides a basic
confidence test to verify that the incoming video is
essentially correct. The Rx port emulates any EDID on
to test a source devices handling of various EDIDs.
You can also configure DPCD registers for emulating
on the DP Rx port using the DPCD Editor (below).
Real Time Analysis
Aux Channel Analyzer
Capture and Decode (Search)
DP Source
SOURCE TESTS - REAL TIME & AUX CHANNEL ANALYSIS
The 980 DP Video Generator / Analyzer module’s
Auxiliary Channel Analyzer (ACA) feature enables you
to monitor the DP Aux Channel for link training and
MST negotiations, HDCP transactions and EDID
exchanges between the module and a connected
display. The ACA logs these events and assigns
precise timestamps to them. You can view the details
of each transaction. These ACA logs can be saved
and disseminated for further analysis by colleagues
and other subject matter experts.
Auxiliary Channel Analyzer
980 DP Video
Generator /
Analyzer module
DP Source
980 DP Video
Generator /
Analyzer module
Test Setup for
Source Analysis
(Capture/Decode
Test Setup for Source
Real Time and ACA Tests
DPCD Editor
Link Training Status
SOURCE TESTS – CAPTURE & DECODE, PIXEL ERROR
Capture and Decode
The 980 DP Video Generator / Analyzer
module captures and decodes the main link
attributes in order to diagnose interoperability
issues related to them. The Protocol Analyzer
captures and stores main link data and
provides visibility into main stream attributes,
secondary data elements, K-Characters and
protocol errors. The Protocol Analyzer
presents these elements on a graphical
timeline and in a table. You can search for
data and select any transaction in the table to
view its details. The capture utility also
enables you to capture specific MST streams
from the source.
Capture and Decode (Filter View)
Real Time Analysis (Basic Analyzer)
The 980 DP Video Generator / Analyzer module ’s
Real Time analysis feature enables you to view the
incoming video, lanes and link rate, timing,
colorimetry and various other metadata in real time at
a glance. The Real Time mode provides a basic
confidence test to verify that the incoming video is
essentially correct. The Rx port emulates any EDID on
to test a source devices handling of various EDIDs.
You can also configure DPCD registers for emulating
on the DP Rx port using the DPCD Editor (below).
Real Time Analysis
Aux Channel Analyzer
Capture and Decode (Search)
DP Source
SOURCE TESTS - REAL TIME & AUX CHANNEL ANALYSIS
The 980 DP Video Generator / Analyzer module’s
Auxiliary Channel Analyzer (ACA) feature enables you
to monitor the DP Aux Channel for link training and
MST negotiations, HDCP transactions and EDID
exchanges between the module and a connected
display. The ACA logs these events and assigns
precise timestamps to them. You can view the details
of each transaction. These ACA logs can be saved
and disseminated for further analysis by colleagues
and other subject matter experts.
Auxiliary Channel Analyzer
980 DP Video
Generator /
Analyzer module
DP Source
980 DP Video
Generator /
Analyzer module
Test Setup for
Source Analysis
(Capture/Decode
Test Setup for Source
Real Time and ACA Tests
DPCD Editor
Link Training Status
HDCP 2.2 SOURCE, SINK & REPEATER COMPLIANCE
HDCP 2.2 Compliance
HDCP 2.2 Source Tests - Test Selection
The 980 HDCP 2.2 compliance tests are ideal for pretesting your DisplayPort 1.2 source, sink or repeater
product prior to submission to an Authorized Test Center
for approval. Pre-testing provides assurance that your
product will pass at the ATC when submitted. The
compliance tests enable you to view the auxiliary channel
analyzer traces logged during the test to help diagnose the
cause of compliance test failures.
980 DP Video
Generator /
Analyzer module
980 with
DP Video Generator /
Analyzer module
DisplayPort Link Layer Compliance
DP 1.2 Core Link Layer Compliance - Test Selection
The 980 DP sink (display) link layer compliance tests are
ideal for pre-testing your DisplayPort 1.2 display product
prior to submission to an Authorized Test Center for
approval. Pre-testing provides added assurance that your
product will pass at the ATC when submitted. Where
permitted, you can self-test your product. Self-testing
offers greater benefits for time to market and cost
reduction than pre-testing by avoiding submission to the
ATC for approval. The compliance tests (below right)
enable you to view the captured data and detailed test
results which help pinpoint the cause of compliance test
failures. You can link to the aux channel traces in the Aux
Channel Analyzer (ACA) to view the root cause of failures
(below).
DP Source
Test Setup for
Source Analysis
(Capture/Decode
LINK LAYER SINK COMPLIANCE
HDCP 2.2 Source Tests - Test Results
980 with
DP Video Generator /
Analyzer module
DisplayPort Monitor
DisplayPort Monitor
Test Setup for Sink Test
DP 1.2 Aux Channel Traces – From LLC Test
Test Setup for Sink Test
HDCP 2.2 Sink Tests - Test Selection
HDCP 2.2 Sink Tests – Test Results
DP 1.2 Core Link Layer Compliance - Test Results
HDCP 2.2 SOURCE, SINK & REPEATER COMPLIANCE
HDCP 2.2 Compliance
HDCP 2.2 Source Tests - Test Selection
The 980 HDCP 2.2 compliance tests are ideal for pretesting your DisplayPort 1.2 source, sink or repeater
product prior to submission to an Authorized Test Center
for approval. Pre-testing provides assurance that your
product will pass at the ATC when submitted. The
compliance tests enable you to view the auxiliary channel
analyzer traces logged during the test to help diagnose the
cause of compliance test failures.
980 DP Video
Generator /
Analyzer module
980 with
DP Video Generator /
Analyzer module
DisplayPort Link Layer Compliance
DP 1.2 Core Link Layer Compliance - Test Selection
The 980 DP sink (display) link layer compliance tests are
ideal for pre-testing your DisplayPort 1.2 display product
prior to submission to an Authorized Test Center for
approval. Pre-testing provides added assurance that your
product will pass at the ATC when submitted. Where
permitted, you can self-test your product. Self-testing
offers greater benefits for time to market and cost
reduction than pre-testing by avoiding submission to the
ATC for approval. The compliance tests (below right)
enable you to view the captured data and detailed test
results which help pinpoint the cause of compliance test
failures. You can link to the aux channel traces in the Aux
Channel Analyzer (ACA) to view the root cause of failures
(below).
DP Source
Test Setup for
Source Analysis
(Capture/Decode
LINK LAYER SINK COMPLIANCE
HDCP 2.2 Source Tests - Test Results
980 with
DP Video Generator /
Analyzer module
DisplayPort Monitor
DisplayPort Monitor
Test Setup for Sink Test
DP 1.2 Aux Channel Traces – From LLC Test
Test Setup for Sink Test
HDCP 2.2 Sink Tests - Test Selection
HDCP 2.2 Sink Tests – Test Results
DP 1.2 Core Link Layer Compliance - Test Results
SPECIFICATIONS
DisplayPort Tx and Rx Ports
Version
Standard Formats
Connectors
Protocol
Video Data Rates
Color Depths
Video Encoding
Video Sampling Modes
HDCP
Audio
Capture memory
DisplayPort 1.2
VESA
Tx (2) DP Standard; Rx (1) DP Standard
DisplayPort
1.62, 2.70, 5.40 Gb/s Link rates
1, 2, 4 Lanes
8, 10, 12, 16 bits
RGB, YCbCr
4:4:4, 4:2:2
Versions 1.3 & 2.2
8 Channel LPCM programmable sine wave
4 GBytes
quantumdata 980
TM
DisplayPort Video Generator
/ Protocol Analyzer Module
Video Generation and Analysis
Testing up to 5.4Gb/s Link Rates
Key Features
Options
Either or both:
- DP Tx for display testing
DisplayPort Tx / Rx
- DP Rx port, two options:
- Basic Analyzer
- Protocol Analyzer (requires Basic analyzer option)
Monitor DisplayPort Aux Channel transactions in real time either while emulating a
DP Aux Channel Analyzer
source or sink
DP HDCP 2.2 Compliance
Run HDCP 2.2 compliance test on DisplayPort sources, sinks and repeaters
DP 1.2 Link Layer Compliance
Run DisplayPort 1.2 Core Link Layer compliance test on sinks (displays)
Compliance Reduced Lane Count Compliance test for reduced lane count

Run functional tests on DisplayPort
displays and monitors up to 5.4
Gb/s link rates with standard format
library consisting of 600 standard
timings and over 300 test patterns

Run VESA Reduced Lane Count
compliance tests on DisplayPort
sources and displays

Run HDCP 2.2 compliance tests on
DisplayPort sources, sinks and
repeaters

NEW! Run DP 1.2 Core Link Layer
compliance tests on DisplayPort
sinks

View EDID and DPCD registers of
connected display to verify
contents
980 Test Platforms
Embedded Display
Power
Weight
Size
Command Line Control
Environmental
980B: 15” diagonal; Resolution: 1024(H); x 768 (V) resolution; 24 bit RGB color.
980R: 7” diagonal: Resolution: 800 (H) x 480 (V); 24 bit RGB color.
90-264 VAC, 47-63Hz
23.76 LBS; 10.78 Kg
980B: Height: 15.25 in. (38.7 cm) Width: 14.57 in. (36.5 cm) Depth: 6.29 in. (15.9 cm)
980R: Height: 6.29 in. (15.9 cm); Width: 15.25 in. (38.7 cm); Depth: 14.57 in. (36.5 cm)
Ethernet (RJ-45) for external GUI and telnet
Operating Temp: 32 to 104 (F); 0 to 40 (C)
1-800-909-7211
teledynelecroy.com
Local sales offices are located throughout the world.
Visit our website to find the most convenient location.
©2017 Teledyne LeCroy. All rights reserved. Specifications, prices, availability and delivery subject to change without notice.
Product or brand names are trademarks or requested trademarks of their respective holders.
v0329

Configure link training parameters
to test display’s handling of various
link training configurations

Run audio tests using
programmable LPCM sine wave
audio tones

Monitor Link training, HDCP and
EDID over the Aux Channel with the
Auxiliary Channel Analyzer feature

Capture and decode main link
metadata including main stream
attributes and secondary data.

View incoming video and metadata
in real time
The Teledyne LeCroy quantumdata 980 DP1.2 Video Generator / Analyzer
module supports video, audio and protocol functional testing of high-end
DP displays and sources. The module supports HBR2 data rates including
1.63, 2.70 & 5.40 Gb/s on 1, 2 & 4 lanes on both its Tx ports and its Rx port.
The module features two DisplayPort 1.2 outputs—both active
simultaneously—for testing displays with multiple DisplayPort inputs. The
DP1.2 module is equipped with all the standard video timings and test
patterns necessary for testing modern displays.
The 980 DP Video Generator / Protocol Analyzer module can be equipped
in either the 980B or 980R Advanced Test Platform. The module can be
controlled either through the PC-based 980 GUI Manager or through the
embedded 980 GUI Manager running on the 980 platform itself. The 980's
built-in color touch screen provides a graphical user interface (GUI) to
control the module.
Source Testing
Display Testing
The DP 1.2 module’s optional Rx
analyzer port emulates a DisplayPort
1.2 display device including EDID and
DPCD emulation, Rx Link Training
function and MST Rx function. The
analyzer supports HDCP 2.2
compliance testing for DisplayPort 1.2
source devices. There are two options
for the analysis function for testing DP
1.2 source devices:
• Basic Analyzer – Provides real time
viewing of video and metadata for
functional testing.
• Protocol Analyzer – Provides
capture and store of the main link
including main stream attributes
and secondary data.
The 980 DP1.2 Video Generator module
supports video, audio and protocol
functional testing high-end DP 1.2
displays. The module supports HBR2
data rates including 1.63, 2.70 & 5.40
Gb/s on 1, 2 & 4 lanes on both its Tx
ports and its Rx port. The module
features two DisplayPort 1.2 outputs—
both active simultaneously for testing
displays with multiple DisplayPort
inputs. The DP module is equipped with
all the standard video timings and test
patterns necessary for testing modern
displays.
The DP video generator also supports
HDCP 2.2 compliance testing for
DisplayPort sink devices and link layer
compliance testing for sink 1.2 devices.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising