K-T13133
PINSTRIPE®
Features
•
•
•
•
•
•
BATH & SHOWER TRIM SET
K-T13133
Metal construction
Wall-mount bath and shower faucet
For use with valves with a diverter
Complements Pinstripe® Suite
Available with cross or lever handle
Requires a Rite-Temp® pressure-balancing valve
K-305-K-NA or K-305-KS-NA
ALSO K-T98757
Codes/Standards Applicable
Specified model meets or exceeds the following:
• ASME A112.18.1/CSA B125.1
Colors/Finishes
• CP: Polished Chrome
• Other: Refer to Price Book for additional colors/finishes
Specified Model
Model
K-T13133-3A*
K-T13133-3B*
Description
Bath & shower trim with diverter – plain cross handle, plain spout
Bath & shower trim with diverter – grooved cross handle, grooved
spout
K-T13133-4A* Bath & shower trim with diverter – plain lever handle, plain spout
K-T13133-4B* Bath & shower trim with diverter – grooved lever handle, grooved
spout
K-98757-3A*
Valve and diverter trim only – plain cross handle
K-98757-3B*
Valve and diverter trim only – grooved cross handle
K-98757-4A*
Valve and diverter trim only – plain lever handle
K-98757-4B*
Valve and diverter trim only – grooved lever handle
* Requires K-305-K-NA or K-305-KS-NA Rite-Temp pressure-balancing valve.
Optional Accessories
73418
Deep roughing-in kit
Colors/Finishes
❑ CP
❑ Other ____
❑ CP
❑ Other ____
❑ CP
❑ CP
❑ Other ____
❑ Other ____
❑
❑
❑
❑
❑
❑
❑
❑
CP
CP
CP
CP
Other
Other
Other
Other
____
____
____
____
❑ NA
Product Specification
Wall-mount bath & shower trim set shall be of metal construction. Product shall be for use with valves with a diverter. Product
shall be available with cross or lever handle. Product shall require a Rite-Temp® pressure-balancing valve K-305-K-NA or
K-305-KS-NA. Product shall complement the Pinstripe Suite. Bath & shower trim set shall be K-_____-_____-_____ with
Rite-Temp pressure balancing valve K-305-____-NA.
Page 1 of 2
1036141-4-E
USA/Canada: 1-800-4KOHLER
(1-800-456-4537)
www.kohler.com
PINSTRIPE®
Installation Notes
Install this product according to the installation guide.
Avoid cross-flow conditions. Do not install shut-off device on
either valve outlet.
Cap shower outlet if deck-mount spout, diverter, or
handshower is connected to spout outlet.
Install straight pipe or tube drop of 7″ (178 mm) to 18″ (457
mm) with single elbow between valve and wall-mount spout.
3-1/4"
(83 mm)
3-7/8"
(98 mm)
6"
(152 mm)
1/2"-14
NPT
72" (1829 mm) To
78" (1981 mm)
To Floor (Typical)
Grooved
Cross Handle
3-1/4"
(83 mm)
11-1/4"
(286 mm)
Max
6-11/16" (170 mm)
Plain
Cross Handle
6-15/16"
(176 mm)
10"
(254 mm)
To Spout
(Bath Only)
48" (1219 mm)
To Floor
(Shower Only)
1/2" IPS
6-7/8" (175 mm)
Top Of
Bath
3-7/8"
(98 mm)
Product Diagram
PINSTRIPE® BATH & SHOWER TRIM SET
Page 2 of 2
1036141-4-E
3"
(76 mm)
4"
(102 mm)
Grooved
Lever Handle
3"
(76 mm)
Plain
Lever Handle
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising