Canon REALiS SX6 Spec Sheet - AV-iQ

Canon REALiS SX6 Spec Sheet - AV-iQ
REALiS SX6
Architect & Engineer Specification
www.canonprojectors.com
(800) OK-CANON
1/23/08
Bid Spec
1.0 Description
The projector shall be SXGA+ resolution. It should use LCOS technology with high contrast and
high brightness. . Projector shall have seemless image with high uniformity. It must include
power zoom and power focus. Lens should be of short throw - 100 inch diagonal screen at less
than 10 feet.
2.0 Bid Specification
Technology:
a. The projector must use the LCOS technology and incorporate AISYS system.
b. The projector must have a native resolution of SXGA+ (1400 x 1050).
c. The projector must support WXGA (for wide screen use).
d. The projector’s brightness must be 3500 lumens with contrast of 1000:1.
e. The projector lens must have a wide angle (100 inch diagonal screen at less than 10 feet).
f. The projector must have a built in powered optical zoom lens of 1.7 times.
g. The projector’s pixel aperture must be 90% or higher.
h. The projector’s uniformity must be 85% or higher.
Image Adjustments
a. The projector must have Adobe RGB and sRGB color space.
b. The projector must have automatic keystone correction of ±20 degrees vertically.
c. The projector must have manual keystone correction of ±20 degrees horizontally.
d. The projector must have the ability to be placed in a vertical position with the lens
pointing up or down.
User Friendly Features:
a. The projector must have auto input detection.
b. The projector must have auto focus.
c. The projector must have auto vertical keystone.
d. The projector must have auto wall color correction.
e. The projector must have internal charging unit to run fan for time period adequate to cool
lamp when power has been removed from projector.
Inputs and Outputs:
a. The projector must have one DVI input.
b. The projector must have ability to accept 2 VGA inputs.
c. The projector must have one VGA output to drive external monitor or other display device.
d. The projector must have component input.
e. The projector must have s-video input.
f. The projector must have composite video input.
g. The projector must have a USB port for mouse control through the IR remote.
Power Management
a. The projector must have an internal condenser to run the fan making it possible
●To unplug the projector as soon as it is turned off.
●To prevent damage to the projector and lamp in case of accidental power lost.
Control Management
a. The projector must have an option network adapter for LAN control.
b. The projector must have RS-232C serial control port to be used with control systems.
c. The projector must have an IR sensor in the front and rear for remote control capability.
Control System Compatibility
a. The projector must be certified to be used with AMX, Crestron and Extron systems.
Ratings:
a. The projector must be powered by 100V to 240V/ 50/60Hz.
b. The projector must weight less than 11 pounds.
c. The Projector’s noise level must not exceed 35dB in brighter mode.
Warranty
a. The projector must have a 3 year warranty on parts and labor.
b. The projector’s lamp warranty must be 120 days.
Specifications
Product
Basics
Imaging Device
Aspect ratio
Native Resolution
Brightness
Uniformity
Contrast
Vertical
Keystone
Horizontal
Optics
Projection lens
Lens shift
Zoom
Focus
Screen size
Projection distance coverage
Throw Ratio
Color Mode
Image
Adjustments
Terminals
Lamp
Remote
Control
Ratings
F1.85-2.5 , f=21.7-35.8 mm
9:1, Fixed
1.7x Powered , 12x Digital zoom
Powered (Auto/Manual)
40" - 300"
3.9 - 29.5ft (1.2 - 9m) / 100”: 9.8 - 16.1ft (3.0 - 4.9m)
1.46-2.43:1
Adobe RGB, sRGB, Presentation, Standard, Movie & Photo
Color Adjust
Wall Correction
Mounting
Dynamic Gamma, 6-axis(RGBCMY) Color Adjustment
Auto
Ceiling/Rear/Ceiling and Rear
Tilt Angle
Analog PC input
Adjusting feet up to 10 degrees
UXGA/SXGA+/WXGA/SXGA/XGA/SVGA/VGA
Digital PC input
Input Signals
REALiS SX6
0.7”' Reflective LCD panels (LCoS) x 3
4:3
SXGA+
3500 ANSI Lumens
88%
1000:1
+/- 20 degrees(Auto/Manual)
+/- 20 degrees(Manual)
Scanning frequency
Video/S-video input
Component input
Digital video input
DVI-I 29pin
Mini D-sub 15pin
Input
RCA x1
Mini DIN 4pin
Stereo mini jack
Output
Mini D-sub 15pin
Built-in Speaker
Control Terminal
Network
Type
Lamp Life(Quiet/Normal)
Sensor
Mouse Control
Fan noise (Normal/Quiet)
Consumption
(Normal/Quiet/Stand-by)
Power
Voltage
Operating
Temperature
Storage
Dimensions ( W x D x H)
Weight
SXGA+/SXGA/WXGA/XGA/SVGA/VGA
H:15~100 kHz , V: 50~100 Hz, Dot clock: 170 MHz
NTSC/PAL/SECAM/NTSC4.43/PAL-M/PAL-N
1080i/1035i/720p/575p/480p/575i/480i
1080i/1035i/720p/575p/480p
Digital PC input/Analog PC input/Digital Video input
Analog PC input /Component input/SCART input
Video input
S-Video input
Stereo audio input
Analog PC output
1W (Mono)
RS-232C
YES( Optional LAN Adapter)
270W NSH (DC)
2000/1500 Hours
Wireless Infrared, Front/Back
Mouse control Receiver(USB)
35/31 dB
355W/290W/7W
AC 100 to 240V , 50/60Hz
41 to 95 F (5 to 35 C)
-22 to 140 F (-30 to 60 C), 5%RH~90%RH
10.5 x 13.2 x 4.5 in. (226 x 336 x 114 mm)
10 .4 lbs (4.7 kg)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising