Music Transmitter and Receiver
Home
Music Transmitter and Receiver
•
•
•
•
•
•
•
•
•
•
•
•
The Miccus® BluBridge home offers the
latest in Bluetooth wireless technology
allowing you to transmit or receive high
quality stereo audio from sources such Home
Stereos, AV Receivers, Audio components,
DVD/BluRay players, mobile phones, tablets
and more.
2
•Bluetooth V.2.1 + EDR, Class ll
•Range (Transmitter): 200ft (Receiver): 45ft
•Bluetooth stereo profile: A2DP, AVRCP
•Frequency: 2.4 GHz
•Power supply: USB 5V DC 500mA
•Size: 4.37 x 3.48 x 1inches Weight: 5.22 oz
•Miccus® BluBridge home (BBRTX-01)
•Dipole Antenna
•USB mini cable
•1/8” (3.5 mm) to RCA Y-cable
•1/8” (3.5 mm) to 1/8” (3.5 mm) cable
•
Dipole Antenna
RCA Audio Input Left / Right
Receive Button
Antenna Terminal
3.5mm Audio Output
3.5mm Audio Input
Mini-USB Power Input
Power Button
Transmit Button
RCA Audio Output Left / Right
3
Get started
Attach the supplied antenna to the antenna
terminal of the BluBridge home. For optimum
performance position the antenna so it is
upright (pointing toward the ceiling) and in
an area that is not obstructed by objects, walls
or near Wi-Fi equipment such as a wireless
router. Connect the mini-USB cable to the
BluBridge home and a USB power supply.
Receiving mode (RX): Use this if intending
to use the BluBridge home as a Bluetooth®
wireless music receiver (i.e. receive music
from your mobile phone or laptop or other
transmitter). Using one of the included
audio cables connect one end into the ports
labelled “Audio Out” and connect the other
end to your stereo receiver or other audio
input.
Transmitting mode (TX): Use this if
intending to use the BluBridge home as a
Bluetooth wireless music transmitter (i.e.
transmit music from your Stereo receiver, MP3
player or other audio source). Using one of
the included audio cables connect one end
into the rear ports labelled “Audio Input” and
connect the other end to your stereo receiver
or other source audio output.
4
Pairing the BluBridge home
“Pairing” means making a wireless
connection. In order for music streaming to
begin the BluBridge home must pair with
another device that supports the Bluetooth®
wireless (A2DP) protocol. This is a two part
process; one part is carried out on the
BluBridge home and the other is carried out
on the other device. Once the pairing process
is complete the devices do not need to be
paired again. To reconnect simply power
them both on and they will remember each
other and automatically connect .
Note: Only one device at a time can be paired
with the BluBridge home.
Using the BluBridge home as a Receiver
(RX Mode):
1. Press and hold the center power button for 3
seconds or until the Blue LED flashes.
2. Shortly press the RX button for 2 seconds
and release. The blue and red LEDs will flash
alternately (indicating pair mode).
3. Search for the BluBridge home on your
mobile phone, laptop or compatible
transmitting device. To complete the pairing
connection some devices may require a
passkey or code, use “0000”. Transmitters such
5
as the BluBridge mini-jack and BluBridge home
do not require pairing codes and will connect
automatically.
4. Once the devices are paired correctly, the
indicator LED will be constant (solid blue).
5. To power off the BluBridge home press and
hold the center button for 3 seconds.
6. Once the devices have been paired you do
not need to repeat the pairing process, simply
power them on and they will remember and
automatically connect with each other.
Using the BluBridge home as a Transmitter
(TX Mode):
1. Power on and enter pairing mode with
your compatible receiving device such as
Bluetooth® headphones or the BluBridge minijack RX (refer to receiver’s documentation for
exact process).
2. Press and hold the center power button of
the BluBridge home for 3 seconds or until the
Blue LED flashes.
3. Shortly press the TX button for 2 seconds
and release. The blue and red LEDs will flash
alternately (indicating pairing mode).
4. Place the receiver and the BluBridge home
next to each other. Some devices may require
a passkey or code, use “0000”. Receivers such as
6
the BluBridge mini-jack and BluBridge home
do not require pairing codes and will connect
automatically.
5. Once the devices are paired correctly, the
indicator LED will be constant (solid red).
6. To power off the BluBridge home press and
hold the center button for 3 seconds.
7. Once the devices have been paired you do
not need to repeat the pairing process, simply
power them on and they will remember and
automatically connect with each other.
Note:
To reset the BluBridge home disconnect it the
USB cable for 3 seconds and re-insert it again.
Status
LED
Pairing Mode
Red and Blue flashing
alternately
Rx Mode Connecting
Blue LED flashing
RX Mode Connected
Blue LED is solid
Tx Mode Connecting
Red LED flashing
Tx Mode Connected
Red LED is solid
7
8
Status
LED
Not Connected
Red or Blue flash every 2
seconds
Searching
Red or Blue flash every
0.5 seconds
Problem
Solution
BluBridge
home does not
turn on
1) Check the USB power
connection
2) Make sure you press and
hold the power button for at
least 3 seconds.
Audio break
ups or Wireless
range too low
1) Make sure the antenna
is attached securely and
positioned correctly.
2) Move the BluBridge home
away from other 2.4GHz
equipment such as Wi-Fi
routers and Microwaves.
No sound/audio
output
1) Check the cables to make
sure they are connected to
the correct jacks.
2) Press play on your music
source.
Can’t pair my
device with
the BluBridge
home
1) Make sure you have the
correct mode selected, one
device must be the transmitter and one device must be
the receiver. Devices such
as Phones and Laptops are
transmitters and device such
as headphones and speakers
are receivers.
2) Make sure both devices are
in pairing
Mode. Typically they will flash
fast when
In pairing mode and slow
when connected.
3) Make sure your device
is capable of (A2DP) the
Bluetooth® wireless stereo
audio profile.
9
Further details and answers to common
questions are found at www.miccus.com/
support.
If your question is not answered feel free
to email us at support@miccus.com. Please
include a the product name in your email
subject line. For live technical assistance please
call 1(616) 604-4449 on Monday thru Friday,
11am-4pm EST.
This device complies with Part 15 of the FCC
rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful
interference, and (2) this device must
accept any interference received; including
interference that may cause undesired
operation.
Federal Communications Commission (FCC)
Statement:
This Equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC
rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is
no guarantee that interference will not occur
in a particular installation. If this equipment
10
11
does cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user
is encouraged to try to correct the interference
by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
- Consult the dealer or an experienced radio/
TV technician for help.
12
Warning :
Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user authority to
operate the equipment.
Tested to comply with FCC standard. FOR
HOME OR OFFICE USE.
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. & This device and its
antenna(s) must not be co-located or conjunction with any other antenna or transmitter.
13
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising