Chapter 19 - Bikermania
10300002_ZOD_H19_UK_1
16-9-2010
10:20
Pagina 001
Chapter 19
Chapter 19 is all about gas tanks. Zodiac has always been running
up front when it comes to fuel tanks. We have Two-piece gas
tanks in steel, One-piece gas tanks in steel, One-piece gas tanks
in aluminum, stock replacement gas tanks, gas tanks with
increased fuel capacity, Custom style gas tank. In short: any type
gas tank. In this chapter you will also find anything else needed
with your gas tank including all type of speedo’s, speedo brackets
and speedo cables, fuel caps and fuel lines. New in this issue are
parts and accessories from Crime Scene Choppers and Chops 76.
Crime Scene Choppers' Speedster gas cap
Chops 76 "Old School" gas caps
Extra heavy gauge steel
gas tanks from Cruise
Speed
Chops 76 billet aluminum rocker
box mount speedo bracket for
Sportster
Billet aluminum dash panel
for Road King
10300002_ZOD_H19_UK_002
7-9-2010
21:56
Pagina 002
Gas Tanks
3.5 GALLON HAND SHIFT GAS TANK
A reproduction of the long unavailable hand shift style 3.5 gallon
tank set as used on the 1947 thru 1965 Big Twin Harley-Davidson.
This reproduction takes original rod type (ZPN 011136) shut-off valve,
cam style gas caps (see gas cap section), cross over gas line
(ZPN 012251) and is designed to accept the 1947 thru 1965 shifter
guide. Measurement may slightly vary from OEM tank (style A).
011381 Hand Shift Gas Tank
ORIGINAL STYLE FAT BOB TANK
Reproductions of the classic Fat Bob gas tank. Mounting is made to
OEM specifications for a perfect fit on stock Harley 4 Speed Big Twin
frames thru 1984 (except Softails). Also fits our Custom rigid and
swing arm frames. Each tank is quality inspected and made to accept
either the FX style dual instrument dash or the FL-FXWG style large
speedo dash, for that Fat Bob look. Available in 3.5 and 5 gallon.
Tank accepts OEM or after market gascaps and fuel valve.
Cam lock style gas tanks (style A)
011303 3 1/2 Gallon tank set (OEM 61218-67A & 61426-67A)
011302 5 Gallon tank set (OEM 61211-67 & 61228-67A)
Screw-In type gas tanks (style B)
011373 3 1/2 Gallon tank set (OEM 61219-83 & 61425-83)
011374 5 Gallon tank set (OEM 61213-83 & 61229-83)
Screw-In type flush cap style gas tanks (style C)
011369 5 Gallon tank set, includes gas caps
011463 Flush cap set
011464 Flush cap vented (R/H)
011465 Flush cap non vented (L/H)
19
Lockable Quick-Lock flush style gas tank with caps
(style D)
011558 5 Gallon tank set, includes lockable gas caps
011549 Lockable gas cap set
3.5 GALLON HAND SHIFT GAS TANK
Updated version of the hand shift style gas tank as used on 1947 thru
1965 Big Twin models (ZPN 011381). This tank uses 1975 and later
style petcocks instead of the original rod type shut-off valve. Will
accept the correct cam-style gas caps and is designed to accept the
stock shifter guide (style A).
011382 Hand Shift Gas Tank
19-002
10300002_ZOD_H19_UK_003
7-9-2010
21:57
Pagina 003
Gas Tanks
6 GALLON FAT BOB TANKS FOR 4 SPEED FRAMES
This King Size Fat Bob tank holds 6 gallon and fits the 4 Speed Big
Twin frames thru 1984 (except Softail models). Made on all new
Zodiac tooling and therefore exclusively available from Zodiac. This
large capacity tank does not look bulky. We kept the contours of the
stock tank so it remains an integral part of the motorcycle. It’s large
capacity offers the extra mileage to those who want to go the
distance. Available for cam lock caps or late type Screw-In gas caps.
Accept stock style dashes. Due to the slightly different contour with
flexible tank-panel (not die-cast).
011316 Cam lock type gas tank (style A)
011318 Screw-In type gas tank (style B)
MUSTANG QUICKBOB GAS TANK FOR 4 SPEED FRAME
Large capacity 4.5 gallon (17 ltr.) one piece Fat Bob style tank.
Designed to fit all stock 4 Speed Big Twin swing arm frames 1972 thru
1984 (except FXST) when using OEM mounting hardware.Also usable
for Custom applications. Accepts Harley style petcock. Available for
use with early style cam-lock gas caps or the later style Screw-In type
gas cap as well as our latest “Quick Cam" Lockable flush mount gas
caps. Flush mount caps are included with this tank. Holds approx.
4 1/2 gallon (17 ltr.).
011295 Cam lock type gas tank (style A)
011312 Screw-In type gas tank (style B)
011565 Quick Cam lockable flush mount type tank includes set
of gas caps (style D)
19
GAS TANKS
THE ZINC-CHROMATE PRIMER FINISH ON SOME OF OUR TANKS
IS PROVIDED FOR THE PROTECTION OF THE TANKS DURING
SHIPMENT AND STORAGE. IT IS NOT RECOMMENDED AS A
PRIMER FINISH FOR PAINT APPLICATIONS WITHOUT PROPER
SURFACE PREPARATION. AS WITH ANY FUEL TANK,
PARTICULARLY ONE WHERE CUSTOM PAINT IS TO BE APPLIED,
ALL TANKS MUST BE PRESSURE TESTED, THEN CLEANED WITH
TANK CLEANER AND SEALED WITH TANK SEALER (SEE TANK
CLEANER & SEALER ZPN 232020) BEFORE PAINTING, TO
PROTECT THE FINAL FINISH AND PREVENT INTERNAL RUST
DURING WINTER STORAGE. FUEL CAPACITY IS MEASURED
WITH TANK IN UPRIGHT POSITION, ANGLE OF PARKED BIKE
WILL DETERMINE ACTUAL CAPACITY OF THE FUEL TANK.
19-003
10300002_ZOD_H19_UK_004
7-9-2010
21:57
Pagina 004
Gas Tanks
FLAT-SIDE FAT BOB TANKS
Our Fat Bob tank sets are a duplication of the late style “Flatside"
tank sets. They fit FXST models 1984 thru 1999 and are available in
a wide variety of tank caps such as OEM style cam lock gas cap and
Screw-In bung and flush cap design. Flush caps are available as a
Screw-In bung and our quick-lock style. Quick lock can also be bought
with key operated lock. The latest addition is the small aluminum
aircraft style gas cap set.These lockable Aero-style gas cap sets have
a chrome plated finish and are also separately available.Tanks are the
best quality on the market. Can be used for crash repairs or any other
Custom application.Available in a 3.5 and a 5 gallon capacity.Accepts
most FL, FXWG and FXST style dashes.
Screw bung style tank sets (style B)
011184 Tank set 3.5 gallon (OEM 61218-85 & 61426-85)
011389 Tank set 5 gallon (OEM 61211-84A & 61228-84A)
Lockable Screw-In type flush mount tank sets (style D)
These flush caps make the lines of this tank much smoother
than on the stock tanks (includes gas caps).
011557 5 Gallon Quick lock flush cap tank set
011549 Lockable gas cap set
19
19-004
5 Gallon tank set for Midi Aero-style gas caps,
chrome plated aluminum gas cap set with locks is
included (style E)
011731 Tank set 5 gallon with Midi Aero-style gas caps
011528 Replacement midi aero gas cap set
011526 Replacement Aero-style gas cap Midi vented (style E)
011527 Replacement midi aero gas cap non-vented
"KING" 6 GALLON FLAT-SIDE FAT BOB TANK
The extra large 6 gallon “King" Fat Bob tank was designed in such
a way it does not change the overall appearance of your motorcycle.
They went to great lengths to duplicate the contours of the stock
tank, to retain the original Fat Bob looks. Once installed, the “King"
Fat Bob looks like an integral piece of the motorcycle and not just an
oversized bolt on accessory. This tank holds over 6 gallons (24 ltr.) of
fuel, offering you the extra mileage needed.The brackets and insides
of the tank are made from extra heavy gauge, reinforced steel to carry
the extra weight of the fuel. Unlike the competition’s tanks, this tank
has flowing lines without any flat spots and doesn’t need excessive
plaster before spraying. Fits all Softail models 1984 thru 1999.Accepts
all large speedo style dashes. Available with Screw-In type gas caps,
lockable gas caps and our latest lockable Aero-style small aluminum
gas caps with chrome plated finish. Gas caps are also separately
available.
011338 Tank set for Screw-In style gas caps (style B)
011563 Tank set with Quick Cam lockable gas caps, caps
included (style D)
011732 Tank set with Midi Aero-style chrome plated and
lockable gas caps, caps included (style E)
Replacement gas caps
011549 Lockable gas cap set
011528 Replacement midi aero gas cap set
011526 Replacement Aero-style gas cap Midi vented (style E)
011527 Replacement midi aero gas cap non-vented
10300002_ZOD_H19_UK_005
7-9-2010
21:58
Pagina 005
Gas Tanks
STRETCHED FLAT-SIDE TANKS FOR SOFTAIL MODELS
These split stretched gas tanks will give your Softail that long, slippery
stretched look associated with the top Custom bike builders. The
stretched section is not a weld-on piece but an actual part of the
tank. The exclusive stretched Zodiac tanks are the only one-piece
steel tank available. Its design will give your bike smooth flowing
lines and a very classy look. Due to the sleek design a narrow seat
(like our Silhouette seats) must be used, stock seat may not fit. Fits
all Softail models 1984 thru 1999. Available with Screw-In type gas
caps, Quick Cam lockable flush or a set of our small chrome plated
aluminum Aero-style gas caps. Gas caps are separately available.
Stretched 2 piece gas tank with Screw-In type gas
caps (style B)
011585 Stretched Slim Bob 4.1 gallon (15 ltr.)
011584 Stretched Fat Bob 5.5 gallon (20 ltr.)
Stretched 2-piece gas tank with Quick Cam type gas
caps, gas caps are included (style D)
011591 Stretched Slim Bob 5,3 gallon (20 ltr.)
011590 Stretched Fat Bob 5,8 gallon (22 ltr.)
011549 Lockable gas cap set
Stretched 2-piece gas tank with Midi lockable
aluminum Aero-style gas caps, gas caps are
included (style E)
011733 Stretched Fat Bob 5,3 gallon (20 ltr.)
011528 Replacement midi aero gas cap set
011526 Replacement Aero-style gas cap Midi vented (style E)
011527 Replacement midi aero gas cap non-vented
4" STRETCHED STEEL FLAT-SIDE GAS TANK FOR
SOFTAILS
These two piece stretched gas tanks will give an extra long, extra
slippery stretched look. Tanks are made by welding a 2" extension
to our stretched tanks making them in total 4" (10 cm) longer than
the stock tank. The extra stretch provides that special slim look. The
rear of the tank has a cut out to match with most narrow seats, such
as our Silhouette seats. Fits Softail models 1984 thru 1999. Tanks
are available in three different cap styles and two sizes, 4.2 gallon
(16.5 ltr.) and 5.4 gallon (20 ltr.).
Tank set for Screw-In type gas caps (style B)
011680 Stretched gas tank set, screw (4.2 gallon)
011615 Stretched gas tank set, screw (5.4 gallon)
Tank set with Quick Cam, lockable flush mount type
gas caps, gas caps included (style D)
011681 Stretched gas tank set, flush (4.2 gallon)
011633 Stretched gas tank set, flush (5.4 gallon)
Tank set with Aero-style Midi aluminum lockable
gas gaps with chrome plated finish, gas caps
included (style E)
011734 Stretched gas tank set, Aero (5.4 gallon)
19
Tank set with Aero-style Midi aluminum lockable
gas gaps with chrome plated finish, gas caps
included (style E)
011549 Lockable gas cap set (style D)
011528 Replacement midi aero gas cap set
011526 Replacement Aero gas cap Midi vented (style E)
011527 Replacement Aero gas cap Midi non vented (style E)
19-005
10300002_ZOD_H19_UK_006
7-9-2010
21:59
Pagina 006
Gas Tanks
ONE PIECE STRETCHED SMOOTH TOP STEEL GAS
TANK FOR SOFTAIL MODELS
This one piece stretched gas tank will give your Softail the long,
slippery stretched look associated with the top Custom bike builders.
The stretched section is not a weld-on piece but an integral part of
the tank.The exclusive Zodiac stretched tanks are the only one piece
steel tank available. Its design will give your bike smooth, flowing
lines and a very classy look. Stretched Softail tanks are available with
dual and single screw type gas cap, dual or single, “Quick-Lock”
lockable gas cap as well as a tank with a single cap aircraft style Aero
gas gap and with the latest style Pop-Up gas cap in a paintable or
chrome finish. Due to the sleek design a narrow seat (like our
Silhouette seats) must be used, it can’t be used with the stock seat.
Fits Softail models 1984 thru 1999. Tanks hold approx. 4.2 gallon
fuel (16 ltr.).
Gas tanks for use with Screw-In type gas caps. Caps
not included (style B)
011675 Single cap stretched gas tank
011660 Dual cap stretched gas tank
Gas tanks for use with Quick Cam lockable flush
mount gas caps, gas cap(s) included (style D)
011677 Single cap stretched gas tank
011676 Dual cap stretched gas tank
19
CRUISE SPEED 2" STRETCH GAS TANK FOR
EVOLUTION SOFTAIL STYLE FRAMES
Like on the other Cruise Speed tanks no expense was spared in the
construction and finish quality of these gas tanks. They are hand
crafted from heavy gauge steel and feature joggle lap and lap joints
through out, resulting in a super-strong gas tank without the worry
of compromising the structural strength while providing a smooth
surface finish. The joggle lap joints also allow the tunnel plate to be
sunken below the bottom surface of the tank, making grinding of the
welds unnecessary. Dependent on the application the tank is mounted
to the frame using the two supplied weld-on frame brackets, or the
bolt-on bracket and one of the weld-on frame brackets. Brackets
feature a recessed rubber mounting system to isolate the tank from
vibrations. Tank has 23.64" overall length, 20" long tunnel with a
reduced width front. Holds approx. 4 Gallon (15 liter) of fuel. Comes
complete with mounting hardware and features 13/16" (22 mm)
petcock outlet, breather tube and rear gas crossovers tapped for
1/8"-27 NPT unions.Available for use with pop-up style gas cap. Gas
caps are not included but must be ordered separately.
930221 Chopper gas tank for pop-up style gas cap (Style G)
012100 Pop-up style gas cap, raw
012101 Pop-up style gas cap, chrome
Gas tank for use with large chrome plated Aerostyle lockable gas cap, gas cap included (style F)
011735 Single cap stretched gas tank
Center fill gas tanks complete for use with pop-up
gas cap, gas cap included (style G)
011856 With paintable Pop-Up gas cap
011857 With chrome Pop-Up gas cap
GAS TANKS
THE ZINC-CHROMATE PRIMER FINISH ON SOME OF OUR TANKS
IS PROVIDED FOR THE PROTECTION OF THE TANKS DURING
SHIPMENT AND STORAGE. IT IS NOT RECOMMENDED AS A
PRIMER FINISH FOR PAINT APPLICATIONS WITHOUT PROPER
SURFACE PREPARATION. AS WITH ANY FUEL TANK,
PARTICULARLY ONE WHERE CUSTOM PAINT IS TO BE APPLIED,
ALL TANKS MUST BE PRESSURE TESTED, THEN CLEANED WITH
TANK CLEANER AND SEALED WITH TANK SEALER (SEE TANK
CLEANER & SEALER ZPN 232020) BEFORE PAINTING, TO
PROTECT THE FINAL FINISH AND PREVENT INTERNAL RUST
DURING WINTER STORAGE. FUEL CAPACITY IS MEASURED
WITH TANK IN UPRIGHT POSITION, ANGLE OF PARKED BIKE
WILL DETERMINE ACTUAL CAPACITY OF THE FUEL TANK.
19-006
10300002_ZOD_H19_UK_007
7-9-2010
22:01
Pagina 007
Gas Tanks
ONE PIECE 2" STRETCHED STEEL TANK WITH INDENTS
Stunning stretched appearance of your motorcycle with this one piece
2” stretched tanks. No weld-on stretched sections, just one piece
high quality steel with indents on both sides. Please note that the
seat cut-out at the stretched sections matches most narrow model
seats, e.g. Silhouette. Fits stock 1984 thru 1999 Softail frames as well
as most aftermarket Softail style frames. Available for use with
OEM style screw-in gas cap or complete with Aero Style or gas cap.
Must be used in combination with a 13/16” (22 mm) petcock. To
allow easy installation, all mounting hardware and brackets are
included.
Fits 1984 thru 1999 Softail models, capacity
4.3 gallon
012811 Tank for screw-in style cap (style B)
012813 Tank with Aero-style lockable cap (style F)
ONE PIECE 2" STRETCHED STEEL GAS TANK FOR
SOFTAIL MODELS WITH DASH MOUNT
Stretched gas tanks will give your Softail the same long, slippery
stretched look and flowing lines as found in our other one piece
stretched tank but as an extra feature also includes a dash mount
welded in place. The stretched section is not a weld on but is an
integral part of the tank and has a seat pocket to match with most
narrow seats, such as our Silhouette seats. Fits Softail models 1984 1999.Tank holds approx. 4.2 gallon (16 ltr.) and is available with dual
Screw-In type gas caps as well as dual Quick Cam lockable gas caps.
011625 Dual cap Screw-In type gas tank with dash mount
(style B)
011628 Dual cap, Quick Cam lockable flush mount gas tank with
dash mount, gas caps are included (style D)
19
GAS TANKS
THE ZINC-CHROMATE PRIMER FINISH ON SOME OF OUR TANKS
ONE PIECE 3" STRETCHED STEEL GAS TANK WITH
AERO LOCKING GAS CAP FOR SOFTAILS THRU 1999
This one-piece 3" stretched gas tank has a smooth top and includes
a single midi aero locking gas cap.This tank gives your bike the same
kind of styling as with the aluminum gas tanks, but at a much more
economical price. The rear of the tank has a cut-out to match with
most narrow seats. Tank holds approx. 3.8 gallon (14 ltr.)
011777 One piece 3" stretched gas tank with aero locking gas
cap (style E)
011526 Replacement Aero-style gas cap Midi vented (style E)
IS PROVIDED FOR THE PROTECTION OF THE TANKS DURING
SHIPMENT AND STORAGE. IT IS NOT RECOMMENDED AS A
PRIMER FINISH FOR PAINT APPLICATIONS WITHOUT PROPER
SURFACE PREPARATION. AS WITH ANY FUEL TANK,
PARTICULARLY ONE WHERE CUSTOM PAINT IS TO BE APPLIED,
ALL TANKS MUST BE PRESSURE TESTED, THEN CLEANED WITH
TANK CLEANER AND SEALED WITH TANK SEALER (SEE TANK
CLEANER & SEALER ZPN 232020) BEFORE PAINTING, TO
PROTECT THE FINAL FINISH AND PREVENT INTERNAL RUST
DURING WINTER STORAGE. FUEL CAPACITY IS MEASURED
WITH TANK IN UPRIGHT POSITION, ANGLE OF PARKED BIKE
WILL DETERMINE ACTUAL CAPACITY OF THE FUEL TANK.
19-007
10300002_ZOD_H19_UK_008
7-9-2010
22:02
Pagina 008
Gas Tanks
ONE PIECE 4" STRETCHED STEEL SMOOTH TOP GAS
TANK FOR SOFTAILS
These one piece stretched smooth top gas tanks will give your Softail
the long, extra slippery stretched look and flowing lines which is very
popular with today’s top Custom bike builders.These tanks are made
by welding a 2 inch extension to our stretched tanks making them in
total 4 inch (10 cm) longer than stock.The extra stretch provides that
special slim look.The rear of the tank has a cut out to match with most
narrow seats, such as our Silhouette seats. Fits Softail models
1984 thru 1999. Tanks are available with four different cap styles
and hold approx. 4.2 gallon of fuel (16 ltr.).
Tanks for Screw-In type gas caps (style B)
011622 Single cap stretched gas tank
011644 Dual cap stretched gas tank
CUSTOM STYLE SMOOTH TOP TANKS FOR TWIN
CAM SOFTAIL MODELS
This Custom style smooth top gas tank drastically changes the looks
of your Twin Cam Softail, it provides much smoother looks and creates
the possibility to use one of our mini speedo’s or mini information
centers. Tanks are made from steel and can be used with the stock
seat. Tank comes complete with a center mounted billet aluminum
Aero-style lockable gas cap and holds approx. 5.1 gallon (19.3 ltr.)
of fuel.
Fits carburetor equipped Twin Cam Softail models
2000 to present
011804 Smooth top, complete with center mounted signal Aerostyle gas cap (style E)
Tanks complete with Quick Cam lockable, flush
mount type gas cap (style D)
011630 Single cap stretched gas tank
011629 Dual cap stretched gas tank
Tank complete with large Aero-style chrome plated
aluminum lockable gas cap (style F)
011736 Single cap gas tank with Aero-style gas cap
19
Tanks with center fill Pop-Up gas cap (style G)
011858 With single paintable Pop-Up gas cap
011859 With single chrome Pop-Up gas cap
2" STRETCHED CUSTOM STYLE SMOOTH TOP TANKS
FOR CARBURETOR TWIN CAM SOFTAIL MODELS
2000 TO PRESENT
One-piece stretched steel Custom gas tank with smooth top, gives
your Softail a longer, stretched look. Will work with most Custom
seats and comes complete with center mount billet aluminum AeroStyle lockable gas cap (gas cap included). Fits carburetor equipped
Twin Cam Softails 2000 up and holds approx. 5.1 gallon (19.3 ltr.)
of fuel.
011810 Smooth top gas tank with center mounted Aero-Style
gas cap (style E)
19-008
10300002_ZOD_H19_UK_009
7-9-2010
22:03
Pagina 009
Gas Tanks
CUSTOM STYLE TANKS WITH DASH MOUNT FOR
SOFTAIL TWIN CAM MODELS
Custom gas tanks with dash mount for Twin Cam models 2000 to
present. Can be used with the stock or stock style seats. Made from
heavy gauge steel for years of leak and trouble free riding. Tanks are
available for use with OEM style Screw-In gas caps and the gauge
equipped OEM left side cap, as well as a model with our Quick Cam
lockable gas caps on both sides of the tank. Both styles are available
for carburetor and EFI models.Tanks take approx. 5.1 gallon (19.3 ltr.).
Fits carburetor equipped Twin Cam Softail models
2000 to present
011813 Screw-In style gas caps, caps not included
011801 Quick Cam lockable gas caps, caps included (style D)
2" STRETCHED CUSTOM STYLE TANKS WITH DASH
MOUNT FOR SOFTAIL TWIN CAM MODELS
This one-piece stretched gas tank has a proper dash mount and will
give your Softail longer, stretched look. This tank will change the
appearance of your bike. Due to the stretch these tanks must be used
with a Custom seat.Tanks are available for use with OEM style ScrewIn style gas caps on the right hand side and fuel gauge on the left side.
For those who can do without this gauge we have a tank available
that uses our Quick Cam lockable gas caps on both sides. Tanks take
approx. 5.1 gallon (19.3 ltr.) of fuel.
Fits carburetor equipped Twin Cam Softail models
2000 to present
011814 Screw-In style gas cap, cap not included (style B)
011807 Quick Cam lockable gas caps, caps included (style D)
19
Fits Fuel Injection equipped Twin Cam Softail
models 2001 to present
011861 Screw-In style gas caps (style B)
Fits Fuel Injection equipped Twin Cam Softail
models 2001 to present
011864 Screw-In style gas cap, cap not included (style B)
011865 Quick Cam lockable gas caps, caps included (style D)
19-009
10300002_ZOD_H19_UK_010
7-9-2010
22:05
Pagina 010
Gas Tanks
RUBBER MOUNT CUSTOM GAS TANK FOR FUEL
INJECTED TWIN CAM SOFTAIL
Steel custom style gas tank with cover to hide the stock fuel pump
panel. Has two screw-in bungs for OEM or aftermarket gas caps.
Comes with custom frame mount brackets that have to be welded to
the frame. Features recessed bottom mounts with heavy duty rubber
isolators.Tank has a 22 1/4" (56.5 cm) long and 2 1/2" (6.4 cm) wide
tunnel and can be used on both Twin Cam Softail and Custom frames.
Available with raw steel or chrome plated dash. Holds approx.
5 1/4 Gallon (20 Liter).
ONE PIECE 4” STRETCHED STEEL GAS TANK FOR
SOFTAIL MODELS WITH DASH MOUNT
These one piece gas tanks with dash mount will give your Softail that
long, extra slippery stretched look and flowing lines. These tanks are
made by welding a 2” extension to our stretched tanks making them
in total 4” (10 cm) longer than stock. The extra stretch provides that
special slim look. Tank has a seat pocket to match with most narrow
seats, such as our Silhouette seats. Fits Softail models 1984 thru
1999.Tank holds approx. 4.2 gallon (16 ltr.) and is available for ScrewIn type gas caps as well as our Quick Cam lockable gas caps.
011631 Dual Screw-In type gas tank with dash mount (style B)
011632 Dual lockable Quick Cam flush mount gas tank with
dash mount (gas caps are included)
Tank for Screw-In type gas caps (Style B)
012902 With raw dash
012903 With chrome dash
19
2" STRETCHED GAS TANK FOR SOFTAIL TWIN CAM
MODELS
This one piece flat top 2” stretched gas tank fits for carbureted Softail
models from 2000 thru 2003. Has a center mounted bung to take one
OEM style screw-in style gas cap. Tank has no provision to install a
dash. Mounting hardware and gas caps are not included.
012834 Fits 2000 thru 2003 carburetor equipped Softails (takes
cap style B)
19-010
ONE PIECE 2” STRETCHED TANK WITH DASH MOUNT
FOR FXR
This one-piece stretched gas tank has a proper dash mount, and will
give your FXR the long, stretched look and flowing lines that go with
our other stretched tanks, together with that classic dash look. The
stretched section is not a weld-on part but an integral part of the
tank and has a seat pocket to go with most narrow seats. Tanks hold
approx. 4.2 gallon (16 ltr.) of fuel and are available with dual ScrewIn type gas caps as well as dual Quick Cam lockable flush mount gas
caps.
011637 Stretched gas tank with dual Screw-In typegas cap
(style B)
011638 Stretched gas tank with dual Quick Cam lockable flush
mount gas cap, caps included (style D)
10300002_ZOD_H19_UK_011
7-9-2010
22:06
Pagina 011
Gas Tanks
ONE PIECE STRETCHED SMOOTH TOP STEEL GAS
TANK FOR FXR MODELS
This one piece stretched smooth top gas tank will give your FXR the
long, slippery stretched look and flowing lines as found in our other
stretched tanks. The stretched section is not a weld-on part but an
integral part of the tank and has a seat pocket to match with most
narrow seats. Tank will hold approx. 4.2 gallon of fuel (16 ltr.) and is
available with single or dual Screw-In type gas caps, single or dual
Quick Cam lockable flush mount gas caps, Aero-style gas cap, and
with the newest Pop-Up gas cap in a paintable and a chrome finish.
ONE PIECE 2” STRETCHED SMOOTH TOP STEEL GAS
TANK FOR DYNA MODELS
This one piece stretched smooth top gas tank will give your Dyna
Glide the long, slippery stretched look and flowing lines associated
with Low Rider Custom bikes. The stretched section is not a weld-on
part but an integral part of the tank and has a seat cut out to match
with most narrow seats, such as our Silhouette seat. Tank holds
approx. 4.2 gallon of fuel (16 ltr.) and is available with Screw-In type
gas caps, Quick Cam lock gas caps, single Aero-style gas cap and
with the new Pop-Up gas caps in a paintable and chrome version.
Tank for Screw-In type gas cap (style B)
011634 Single cap stretched gas tank
011619 Dual cap stretched gas tank
Gas tanks for use with Screw-In type gas caps, caps
not included (style B)
011639 Single cap stretched gas tank
011620 Dual cap stretched gas tank
Tank complete with Quick Cam lockable flush
mount type gas caps (style D)
011636 Single cap stretched gas tank
011635 Dual cap stretched gas tank
Tank complete with large Aero-style chrome plated
lockable aluminum gas cap (style F)
011737 Single cap stretched tank
011525 Replacement Aero gas cap large
Tank complete with center fill single cap Pop-Up
gas cap (style G)
011848 With paintable Pop-Up gas cap
011849 With chrome Pop-Up gas cap
Gas tanks for use with Quick Cam, lockable, flush
mount caps, gas cap(s) included (style D)
011641 Single cap stretched gas tank
011640 Dual cap stretched gas tank
Gas tanks for use with large single Aero-style
chrome plated lockable gas cap, gas cap included
(style F)
011740 Single cap stretched gas tank
19
Gas tanks for use with single Pop-Up gas cap, gas
caps included (style G)
011852 With paintable Pop-Up gas cap
011853 With chrome Pop-Up gas cap
19-011
10300002_ZOD_H19_UK_012
7-9-2010
22:07
Pagina 012
Gas Tanks
ONE PIECE 2” STRETCHED TANK WITH DASH MOUNT
FOR DYNA GLIDE
This one-piece stretched gas tank has a proper dash mount, and gives
your Dyna the long, stretched look and flowing lines found on the one
piece stretched tanks, together with that classic dash look. The
stretched section is not a weld-on part but an integral part of the
tank and has a seat pocket to go with most narrow seats. Tanks hold
approx. 4.2 gallon (16 ltr.) of fuel and are available with dual ScrewIn type gas caps as well as dual Quick Cam lockable flush mount gas
caps.
011642 Stretched gas tank for dual Screw-In type
011643 Stretched gas tank with dual Quick Cam lockable flushmount type gas caps, caps included
FAT BOB TANK FOR HARLEY FXR MODELS
This tank will create the Classic Harley Fat Bob look for the 1982 thru
1994 FXR models. It has the appearance of the Classic split Fat Bob
tanks but is really a one piece tank assembly.Tank accepts screw type
gas caps or the latest design “Quick Cam” lockable flush mount,
stock style petcock and FL-FXWG style large speedo dash. Bolts
directly to the stock mounts. Each tank includes our ZPN
114246 Speedo cable (front wheel drive with 5/8” or 16 mm cable
to speedo nuts) and a chrome tank divider panel (3.5 gallon).
011348 Screw-In type gas tank (style B)
011564 Quick Cam lockable flush-mount type tank, includes set
of gas caps (Style D)
19
GAS TANKS
THE ZINC-CHROMATE PRIMER FINISH ON SOME OF OUR TANKS
IS PROVIDED FOR THE PROTECTION OF THE TANKS DURING
SHIPMENT AND STORAGE. IT IS NOT RECOMMENDED AS A
PRIMER FINISH FOR PAINT APPLICATIONS WITHOUT PROPER
SURFACE PREPARATION. AS WITH ANY FUEL TANK,
PARTICULARLY ONE WHERE CUSTOM PAINT IS TO BE APPLIED,
ALL TANKS MUST BE PRESSURE TESTED, THEN CLEANED WITH
TANK CLEANER AND SEALED WITH TANK SEALER (SEE TANK
CLEANER & SEALER ZPN 232020) BEFORE PAINTING, TO
PROTECT THE FINAL FINISH AND PREVENT INTERNAL RUST
DURING WINTER STORAGE. FUEL CAPACITY IS MEASURED
WITH TANK IN UPRIGHT POSITION, ANGLE OF PARKED BIKE
WILL DETERMINE ACTUAL CAPACITY OF THE FUEL TANK.
19-012
QUICK BOB STYLE SMOOTH TOP TANKS FOR DYNA
AND FXR
Superb quality gas tank. Ideal for applications where tank mounted
speedometer is not wanted. These tanks have an improved mount at
the front and back.Available for Dyna Glides 1990 to present and FXR
models 1984 thru 1994. They are designed to bolt to the original
mounts and feature Screw-In type gas caps (3.5 gallon) (style B).
011572 FXR smooth top tank
011573 Dyna Glide smooth top tank
10300002_ZOD_H19_UK_013
7-9-2010
22:09
Pagina 013
Gas Tanks
QUICK BOB TANK FOR DYNA GLIDE MODELS
They have changed the mountings of this very popular tank to fit
Dyna Glide models from 1991 to present. It comes with a showchromed dash panel to get the “Split Tank” Fat Bob look. The Dyna
Quick Bob includes a bracket to accept the OEM FXDWG dash as well
as the Old Style 2 or 3 light FL dashes with large style speedometer.
Available with Screw-In gas caps as well as the Flush mount Quick
Cam lockable gas cap (flush gas caps are included with the tank).Tank
has extra large 3.5 gallon capacity (15 ltr.) for long hauls. Hardware
kits are separately available.
011482 Screw-In type gas tank (style B)
011566 Quick Cam lockable flush mount style, includes gas cap
set (style D)
345263 Hardware set
STOCK STYLE GAS TANKS FOR 1983 THRU 2003
SPORTSTER MODELS
The upgraded stock style Peanut Sportster gas tank with improved
rubber mount. Rubber mounts isolate the tank from the engine
vibration and prevent cracking of the welds. This is a great
improvement over the Original Equipment tank. Tank holds approx.
2.25 gallon (8.5 Ltr.) and is available with a Screw-In type gas cap
(style B) type and the late custom style Pop- Up gas cap (style G).
The Pop-Up gas cap is included with the tank.
Fits 1983 thru 1994 models
011484 Tank for Screw-In gas caps (OEM 61023-93) (Style B)
Fits 1995 thru 2003
011496 Tank for Screw-In gas caps (61348-96A) (Style B)
011824 Tank with paintable pop up gas cap (style G)
19
GAS TANKS
THE ZINC-CHROMATE PRIMER FINISH ON SOME OF OUR TANKS
IS PROVIDED FOR THE PROTECTION OF THE TANKS DURING
SHIPMENT AND STORAGE. IT IS NOT RECOMMENDED AS A
PRIMER FINISH FOR PAINT APPLICATIONS WITHOUT PROPER
SURFACE PREPARATION. AS WITH ANY FUEL TANK,
PARTICULARLY ONE WHERE CUSTOM PAINT IS TO BE APPLIED,
ALL TANKS MUST BE PRESSURE TESTED, THEN CLEANED WITH
TANK CLEANER AND SEALED WITH TANK SEALER (SEE TANK
PEANUT STYLE TANKS FOR 2004 THRU 2006
SPORTSTER MODELS
Peanut style tanks to fit 2004-2006 stock Sportster frames. Fuel
capacity is approx. 3.9 gallon (14.5 liter). Available complete with
your choice of Aero-style or Pop-Up style gas cap. Tanks are 49 cm
long, 28 cm wide, and 20 cm high.
012805 Tank with Aero-style gas cap (style E)
012806 Tank with Pop-up style gas cap (style G)
CLEANER & SEALER ZPN 232020) BEFORE PAINTING, TO
PROTECT THE FINAL FINISH AND PREVENT INTERNAL RUST
DURING WINTER STORAGE. FUEL CAPACITY IS MEASURED
WITH TANK IN UPRIGHT POSITION, ANGLE OF PARKED BIKE
WILL DETERMINE ACTUAL CAPACITY OF THE FUEL TANK.
19-013
10300002_ZOD_H19_UK_014
7-9-2010
22:10
Pagina 014
Gas Tanks
CUSTOM 2” STRETCH TANK FOR 2004 THRU 2006
SPORTSTER
Custom 2” stretched tanks to fit directly all 2004 thru 2006 XL
models.These stretched tanks feature a fluent swage line and fit most
narrow seats (e.g. our Silhouette seats). Tank holds approximately
3.3 Gallon (12.5 ltr) and comes complete with mounting hardware.
012802 Tank with screw bung, takes stock style gas cap (style B)
012809 Tank complete with Aero Style gas cap (style F)
012810 Tank complete with pop-up gas cap (style G)
KING SPORTSTER GAS TANKS
Zodiac’s King Size tanks for Sportster models have been a popular
choice of Custom bike builders for many years. Through the years it
has almost become a standard upgrade for those who want the
mileage. This classic “King Sportster” gas tank is now also available
with the late OEM style Screw-In gas cap as well as the latest fashion
“Pop-up” gas cap for the 1982 thru 1994 models. Will bolt to the
Stock frame mounts on all 1979 to 1994 Sportsters, including the
Evolution models. Has a larger than stock fuel capacity for extra
mileage. Holds approx. 3.1 gallon (11.5 ltr.).
Fits 1979 thru 1981 models
011148 Cam lock type gas caps (style A)
Fits 1982 thru 1994 models
011378 Screw-In type gas caps (style B)
011830 Paintable pop up gas cap (style G)
011831 Chrome pop up gas cap (style G)
19
EXTENDED CLASSIC PEANUT STYLE GAS TANK FOR
SPORTSTER MODELS
They have extended the Original style Peanut style gas tank to give
it a sleeker look and add some fuel capacity. It is available with two
different petcock locations, one to fit Sportster models from 1982 thru
1994 the other to fit 1995 thru 2003. This large capacity tank holds
3.25 gallon (12.25 ltr.) fuel, and is designed to maintain the classic
“Peanut” profile. It still looks like an integral part of the motorcycle
and not just like an over-sized bolt-on accessory. Both tanks take
Screw-In type caps (style B).
011399 Fits models 1982 thru 1994
011495 Fits models 1995 thru 2003
GAS TANKS
THE ZINC-CHROMATE PRIMER FINISH ON SOME OF OUR TANKS
IS PROVIDED FOR THE PROTECTION OF THE TANKS DURING
SHIPMENT AND STORAGE. IT IS NOT RECOMMENDED AS A
PRIMER FINISH FOR PAINT APPLICATIONS WITHOUT PROPER
SURFACE PREPARATION. AS WITH ANY FUEL TANK,
PARTICULARLY ONE WHERE CUSTOM PAINT IS TO BE APPLIED,
ALL TANKS MUST BE PRESSURE TESTED, THEN CLEANED WITH
TANK CLEANER AND SEALED WITH TANK SEALER (SEE TANK
CLEANER & SEALER ZPN 232020) BEFORE PAINTING, TO
PROTECT THE FINAL FINISH AND PREVENT INTERNAL RUST
DURING WINTER STORAGE. FUEL CAPACITY IS MEASURED
WITH TANK IN UPRIGHT POSITION, ANGLE OF PARKED BIKE
WILL DETERMINE ACTUAL CAPACITY OF THE FUEL TANK.
19-014
10300002_ZOD_H19_UK_015
7-9-2010
22:12
Pagina 015
Gas Tanks
RUBBER MOUNT KING SPORTSTER GAS TANKS
Zodiac’s King Size tanks for Sportster models have been a popular
choice of Custom bike builders for many years. Through the years it
has become the “classic” choice for those who want the mileage.We
up-graded this classic “King Sportster” gas tank with rubber mounts
to isolate it from the engine vibration, and add four style gas caps,
being the stock style Screw-In, the Quick Cam lockable flush mount,
a chrome plated lockable Midi Aero-style aluminum gas cap and the
latest Pop-up gas cap in a paintable as well as a chrome plated finish.
Except for the stock style Screw-In type tanks, gas caps are included
with the tanks. Will bolt to the Stock frame mounts. Available for
1982 thru 2003 Sportster including the Evolution Sportster. Has larger
than stock fuel capacity for extra mileage. Holds approx. 3.1 gallon
(11.5 ltr.).
Fits 1982 thru 1994 models
011483 For Screw-In type gas caps (style B)
011556 Quick Cam lockable flush mount tank, includes gas cap
(style D)
011741 Aero-style gas tank, includes Midi aluminum lockable
gas cap with chrome plated finish (style E)
011833 With chrome pop up gas cap (style G)
Fits 1995 thru 2003
011497 For Screw-In type gas caps (style B)
011559 With Quick Cam lockable flush mount tank (style D)
011742 With chrome plated Midi Aero-style aluminum lockable
gas cap (style E)
011834 With paintable pop up gas cap type (style G)
LATE STYLE ROLLED EDGE KING TANK FOR
SPORTSTER
This tank has it all, the classic Peanut profile with the latest style
rolled edges and increased fuel capacity for the extra miles. Holds
approx. 3.4 gallon (13 ltr.). Perfect for crash repairs or updating older
models. Tanks come complete with mounting hardware and rubber
grommets. Available for use with OEM or aftermarket Screw-In gas
cap (style B). For those who want something else we also supply
these tanks with various Custom gas caps, such as a chrome plated
and lockable aluminum Aero-style gas cap (style E), or Pop-up style
gas cap in a paintable or chrome finish (style G). Except for
Screw-In type tanks, gas cap(s) are included with the tank.
Center fill, fits 1982 thru 1994 Sportster models
with S&S Super E or G carburetor
011701 For Screw-In style gas cap (style B)
011743 With midi Aero-style lockable gas cap (style E)
011836 With paintable Pop-up gas cap (style G)
011837 With chrome Pop-up gas cap (style G)
Center fill, fits 1995 thru 2003 Sportster models
011575 For Screw-In style gas cap (style B)
011744 With midi Aero-style lockable gas cap (style E)
Replacement Midi Aero-style gas cap (style E)
011526 Lockable Aero gas cap, chrome finish
19
Replacement gas caps
011549 Lockable gas cap set
011526 Replacement Aero-style gas cap Midi vented (style E)
19-015
10300002_ZOD_H19_UK_016
7-9-2010
22:13
Pagina 016
Gas Tanks
ONE PIECE SPORTBOB TANKS FOR SPORTSTER
These tanks have an improved rubber mount at the front and back.
Available for Sportster models 1957 thru 1978 and 1982 thru 2003.
Tanks are designed to bolt to the original mounts. 1982 to present
tank is available with Screw-In type gas cap, the Quick Cam lockable
flush cap, a large chrome plated and lockable aluminum Aero-style
gas cap, and the latest Pop-up style gas cap. Except for the cam lock
and Screw-In style, the gas cap are included with the tank. Combine
this tank with our Wide Glide conversion kit, Ducktail front fender and
a nostalgic seat to create your own Heritage look.Tank holds approx.
3.8 gallon (14 ltr.).
Fits 1957 thru 1978
011322 Dual cap Cam lock style tank (style A)
Fits 1982 thru 2003
011473 Dual cap Screw-In style tank (style B)
011561 Dual cap Quick Cam lockable style tank, gas caps
included (style D)
011745 Single cap Aero-style gas tank, large chrome plated
lockable gas cap included
011842 With single paintable pop-up gas cap
011843 With single cap with chrome pop-up gas cap (style G)
19
ONE PIECE RUBBER MOUNT QUICKBOB GAS TANK
FOR 1982 THRU 2003 SPORTSTER MODELS
Re-designed Quickbob tank to fit the 1982 thru 2003 Sportster
models.At the same time the rigid mount was changed to an improved
rubber mount which isolates the tank from the engine vibration and
added threaded dash mounting holes. Each tank comes complete
with dash base and a chrome plated dash.This dash accepts the large
FL style speedometers and has no ignition switch hole, so rewiring is
not needed. Dashes are also separately available. Also available is a
special dash with a smaller hole to accept the 1995 thru 2003 Original
Equipment Sportster speedo. Tank holds approx. 4 gallons (15.2 ltr.)
which is almost twice as much as the original tank.
Screw-In type gas tank (style B)
011474 Fits 1982 thru 2003, includes FL speedo type dash
013083 Chrome plated dash for large FL type speedo
345276 Optional dash cover for stock Sportster 1995 thru
2003 (except XL883C and XL1200C) electronic
speedometer
Note: Installation of ZPN 011473, 011561 and 011745 tanks
on 1995 thru 2003 Sportster models requires the use of ZPN
011570 ignition switch and coil-relocation kit. This kit must be
ordered separately.
011570 Ignition switch and coil relocation kit for 19952003 Sportster models
IGNITION SWITCH AND
COIL RE-LOCATION KIT
FOR 1995-UP
SPORTSTER
When installing our rubber mount tanks on1995 to present Sportster
models, the front bracket will interfere with the ignition switch. With
this bracket-set the ignition switch is re-located under the top motor
mount bolt of the rear cylinder. Also the coil needs to be relocated,
therefor this chrome plated coil bracket is included.
011570 Ignition switch and coil relocation kit for 19952003 Sportster models
19-016
10300002_ZOD_H19_UK_017
7-9-2010
22:14
Pagina 017
Gas Tanks
ONE PIECE "RUBBER MOUNTED" FAT BOB TANK FOR
SPORTSTER
Another of Zodiac’s top quality gas tanks. Tanks have an improved
“All rubber mount” at the front and back, which isolate the tank from
the vehicle’s vibration. Fits all Sportster models 1957 thru
2003 (except 1979-1981) including the Evolution models. Tanks are
designed to bolt to the original mounts and accept the 2-light or 3light dash with large FL style speedo. 1957 thru 1978 model has cam
lock gas, 1982 thru 2003 has Screw-In type gas caps. The 1982 thru
2003 model is also available with the Quick Cam lockable flush mount
gas caps. These flush mount tank do include a set of lockable gas
caps. Combine this tank with our Wide Glide conversion kit, Ducktail
front fender and nostalgic seat to create your own Heritage look.
Tank holds approx. 3.3 gallon (12.5 ltr.). Mounts are separately
available.
Fits Sportster models 1957 thru 1978
011306 Cam lock style gas cap tank (style A)
Fits Sportster models 1982 thru 2003
011308 Screw-In style gas cap tank (style B)
011560 Quick cam lockable flush mount style gas cap tank,
includes gas caps (style D)
011549 Lockable gas cap set
345286 Rear mount with rubbers
345287 Front mount with rubbers
ONE PIECE STRETCHED SPORTBOB TANKS
Initially the stretched style tanks were made by welding an extension
to the rear of the tank but Zodiac has the real thing. This smooth top
stretched Sportster tank has it all and adds more style to your machine.
These tanks are available in a dual or single cap for Screw-In, lockable,
flush mount Quick Cam gas caps, Aero-style chrome plated and
lockable aluminum gas caps as well as latest style Pop-up gas caps.
Flush mount, Aero and Pop-up gas tanks include gas cap(s). Holds
approx. 4 gallon (15 ltr) of gas and comes complete with mounting
hardware. Fits Sportster models 1982 thru 2003.
Note: 1995 thru 2003 models require our switch & coil relocation kit
ZPN 011570.
Screw-In type stretched gas tank (style B)
011586 Single cap gas tank
011583 Dual cap gas tank
Quick Cam lockable Flush mount type gas tank,
includes gas cap(s) (style D)
011589 Single cap gas tank
011588 Double cap gas tank
Center fill Aero-style gas tank, includes large
chrome plated and lockable aluminum gas cap
(style F)
011746 Single cap gas tank
19
Center fill Pop-up style gas tank, includes gas cap
(style G)
011840 With paintable Pop-up gas cap
011841 With chrome Pop-up gas cap
Replacement gas caps
011549 Lockable gas cap set
011525 Replacement Aero gas cap large
19-017
10300002_ZOD_H19_UK_018
7-9-2010
22:16
Pagina 018
Gas Tanks
ONE PIECE 2” STRETCHED STEEL TANK WITH
INDENTS FOR SPORTSTER MODELS
2” Stretched one piece tanks. No weld-on stretched sections, just
one piece high quality steel. Indents on both sides of these tanks add
a touch of class. Please note that the seat cutout at the stretched
sections matches most narrow model seats, e.g. Silhouette.Available
for use with OEM style screw-in gas cap or complete with Aero Style
or pop-up gas cap. Must be used in combination with a
13/16” (22 mm) petcock. Tanks hold approx. 4 gallon (15 ltr.) and
come complete with hardware.
Fits 1995 thru 2003 XL models, capacity 4 gallon
012819 Tank for screw-in style cap (style B)
012821 Tank with Aero-style lockable cap (style F)
Fits 2004 thru 2006 XL models, capacity 4 gallon
012823 Tank for screw-in style cap (style B)
012825 Tank with Aero-style lockable cap (style F)
012826 Tank with pop-up style cap (style G)
ONE PIECE STRETCHED SPORTBOB TANKS WITH
DASH MOUNT FOR 1982 THRU 2003 SPORTSTER
MODELS
This 2” stretched Sportbob tanks with dash mount, will give your
Sportster the long slippery stretched look as found on our other
stretched tanks.Tanks have an improved rubber mount system which
isolates the tank from the engine vibrations. Designed to bolt to the
original mounts and accept the 2-light or 3-light dash with large FL
style speedo. Fits Sportster models 1982 thru 2003. Holds approx.
4 gallon (15 ltr.), which is almost twice as much as the original tank.
Available dual Screw-In type gas caps as well as with dual Quick Cam
lockable gas caps.
Note: 1995 thru 2003 models require use of our switch and coil
relocating kit ZPN 011570.
011601 Dual Screw-In type cap gas tank (style B)
011602 Dual Quick Cam lockable gas caps, gas caps included
(style D)
011549 Lockable gas cap set
345286 Rear mount with rubbers
345287 Front mount with rubbers
19
GAS TANKS
THE ZINC-CHROMATE PRIMER FINISH ON SOME OF OUR TANKS
IS PROVIDED FOR THE PROTECTION OF THE TANKS DURING
SHIPMENT AND STORAGE. IT IS NOT RECOMMENDED AS A
PRIMER FINISH FOR PAINT APPLICATIONS WITHOUT PROPER
SURFACE PREPARATION. AS WITH ANY FUEL TANK,
PARTICULARLY ONE WHERE CUSTOM PAINT IS TO BE APPLIED,
ALL TANKS MUST BE PRESSURE TESTED, THEN CLEANED WITH
TANK CLEANER AND SEALED WITH TANK SEALER (SEE TANK
CLEANER & SEALER ZPN 232020) BEFORE PAINTING, TO
PROTECT THE FINAL FINISH AND PREVENT INTERNAL RUST
DURING WINTER STORAGE. FUEL CAPACITY IS MEASURED
WITH TANK IN UPRIGHT POSITION, ANGLE OF PARKED BIKE
WILL DETERMINE ACTUAL CAPACITY OF THE FUEL TANK.
19-018
CHROME RE-LOCATION IGNITION SWITCH COVER
This chrome ignition switch cover is a must when you relocate the
ignition switch on your Sportster or Big Twin. It covers the unfinished
bottom end of the ignition switch for a cleaner appearance.
370060 Custom ignition switch cover
10300002_ZOD_H19_UK_019
7-9-2010
22:18
Pagina 019
Gas Tanks
2" STRETCHED RUBBER MOUNT SPORTBOB TANK
WITH DASH FOR 1995 THRU 2003 SPORTSTER
MODELS
This 2" stretched Sportbob tank with dash will give your Sportster the
long slippery stretched look. Tank has an improved rubber mount
system which isolates the tank from most engine vibrations. Designed
to bolt to the original mounts of 1995 thru 2003 Sportster models.
Tank comes complete with dash base plate, 3 light dash to take a
OEM Big-Twin style electronic speedometer, 6 post Fat Bob style
ignition switch, coil relocation bracket and all hardware needed.Tank
holds approx. 3.4 gallon (12.9 ltr.), almost twice as much as the
original tank. Available with either dual Screw-In type gas caps or
dual Quick Cam lockable gas caps. A dash cover to take an
OEM Sportster electronic speedometer must be ordered separately.
011605 Dual Screw-In type gas tank with dash and switch kit
(style B)
011606 Dual Quick Cam lockable gas tank with dash and switch,
gas caps included (style D)
345276 Optional dash cover for stock Sportster 1995 thru
2003 (except XL883C and XL1200C) electronic
speedometer
ONE PIECE STRETCHED TANK, DASH & SPEEDO KITS
FOR SPORTSTER MODELS
Custom style one piece stretched gas tank with tank mounted dash.
This tank gives your Sportster the popular long, slippery stretched
look and flowing lines. The tank mounted Fat Bob dash kit adds the
Big Twin look. This very complete kit includes the gas tank, with your
choice of Screw-In style gas caps or Quick Cam flush mounted locking
gas caps, a chrome plated 3 light dash complete with dash base plate,
speedometer in KPH with reset knob, speedo damper rubber and
6 post Fat Bob ignition switch. The stretched section is not a weldon part but an integral part of the tank and has a seat pocket to
match with most narrow seats, such as our Silhouette seats. Tank
holds approx. 3.4 gallon of fuel (13 ltr.).
Fits 1982 thru 1994 Sportster models.
011612 Stretched gas tank with dash kit and dual Screw- in style
caps (style B)
011613 Stretched gas tank with dash kit and dual Quick- Cam
lockable flush mount gas caps (style D)
Replacement dash mount and dash cover, fits ZPN
011605, 011606, 011612 and 011613
011658 Dash cover
013068 Dash base
19
19-019
10300002_ZOD_H19_UK_020
7-9-2010
22:20
Pagina 020
Gas Tanks
RICK'S V-ROD GAS TANK
Most V-Rod owners know that you have to start looking for the next
gas station almost immediately when you have hit the road. Rick's
gas tanks have a 1 gallon (4.5 liter) larger capacity as the stock tank,
which totals to 4.9 gallon (18.5 liter). This increases your reach by
approx. 35%. Tank comes in black painted finish. Takes the OEM gas
cap, opening mechanism and electronics. Installation requires minor
modifications on the protection plate under the tank.This is very easy
when you follow the included step-by-step fitting instructions.
Designed to go with stock or up-to 300 wide rear tire and matching
swing arm on 2002 thru 2006 V-Rod models.
741395 Rick's V-Rod gas tank
19
CRUISE SPEED TEARDROP GAS TANKS FOR 2004
THRU 2006 SPORTSTER
These teardrop style gas tanks, with their rounded shape and smooth
fluent lines, drastically change the looks of your Sportster. No expense
was spared in the construction and finish quality of these gas tanks.
When mounted on your Sportster you will notice that there are no
visible welds, as these have been finished to give a seamless
appearance. Tank holds 3.5 Gallon (over 13 liter) to allow you to go
the distance. Available to take a pop-up style gas cap (Style G). Gas
cap must be ordered separately. Tanks fit 2004 thru 2006 Sportster
models.
930186 For pop-up style gas cap (Style G)
012100 Pop-up style gas cap, raw
012101 Pop-up style gas cap, chrome
19-020
CUSTOM GAS TANKS
Our gas tanks are made from thick gauge quality steel, all welds are
quality checked, they feature two sizes of petcock connecting thread
to take early style petcocks with 3/8” NPT or 1/2” NPT Custom
petcocks.Tanks will take our universal or deluxe gas cap (see gas cap
section) and have universal mount for many Custom applications.
011129 “King” Sportster Model 3.1 Gallon (12 ltr.)
011265 Sportster Model 2.4 Gallon (9.1 ltr.)
CRUISE SPEED CUSTOM GAS TANK
Steel gas tank for custom applications. All welds that are in sight
when these tanks are mounted have been finished and polished to
give a nice smooth seamless appearance. Tanks are to be mounted
on the frame with the included weld-on brackets, which feature a
recessed rubber mounting system to isolate the tank from vibration.
Tank is 21 1/4” long, 14” wide, 9” high and has a 3 1/4” wide tunnel.
Holds approx. 3.5 Gallon (over 13 liter) of fuel.Takes 13/16” (22 mm)
fuel tap. Gas cap is not included.
930190 Custom gas tank for pop-up gas cap (Style G)
012100 Pop-up style gas cap, raw
012101 Pop-up style gas cap, chrome
10300002_ZOD_H19_UK_021
8-9-2010
7:11
Pagina 021
Gas Tanks
CRUISESPEED STRETCHED STYLE CHOPPER GAS TANK
No expense was spared in the construction and finish quality of these
gas tanks. They are hand crafted from heavy gauge steel and feature
joggle lap and lap joints through out, resulting in a super-strong gas
tank without the worry of compromising the structural strength while
providing a smooth surface finish.The joggle lap joints also allow the
tunnel plate to be sunken below the bottom surface of the tank,
making grinding of the welds unnecessary. Tank is mounted to the
frame using the two supplied weld-on frame brackets. Brackets feature
a recessed rubber mounting system to isolate the tank from vibrations.
Tank has a 23 3/4”, 2 3/8” wide tunnel with an easy to customize
reduced width front. Holds approx. 4 Gallon (15 liter) of fuel. Comes
complete with mounting hardware and features 13/16” (22 mm)
petcock outlet, breather tube and rear gas crossovers tapped for
1/8”-27 NPT unions. Gas cap is not included but must be ordered
separately.
930158 Chopper gas tank for pop-up style gas cap (Style G)
012100 Pop-up style gas cap, raw
012101 Pop-up style gas cap, chrome
CRUISE SPEED SMOOTHIE CUSTOM GAS TANK
No expense was spared in the construction and finish quality of these
steel gas tanks. They feature joggle lap and lap joints through out,
resulting in a super-strong gas tank without the worry of
compromising the structural strength while providing a smooth
surface finish. The joggle lap joints also allow the tunnel plate to be
sunken below the bottom surface of the tank, making grinding of the
welds unnecessary. Tank is mounted to the frame using the supplied
weld-on frame brackets, which feature a recessed rubber mounting
system to isolate the tank from vibrations. Tank has 22 1/4” length
with a 19 1/4” long, 3 1/2” wide tunnel and a 3” deep seat pocket.
Holds approx. 4 Gallon (15 liter) of fuel. Comes complete with
mounting hardware and features 13/16” (22 mm) petcock outlet,
breather tube and rear gas crossovers tapped for 1/8”-27 NPT unions.
Gas cap is not included but must be ordered separately.
930147 Smoothie gas tank for pop-up style gas cap (Style G)
012100 Pop-up style gas cap, raw
012101 Pop-up style gas cap, chrome
19
PRO IMAGE II SERIES 6” STRETCHED CHOPPER TANKS
Pro Image Series tanks in the 6” stretched version feature pointed
ends, especially designed for 6” stretched High Neck Chopper frames,
like our North Sea Chopper edition. All Pro Image II series tanks
feature extra wide tunnels to accept even 2 3/8” top tube Chopper
frames. Each tank is equipped with recessed bolt-on mounting
brackets for a smooth and hidden look. Come complete with mounting
hardware, even to fit “rubber-mounted” applications, and pop-up
gas cap.
012837 Tank with pop-up cap (style G)
19-021
10300002_ZOD_H19_UK_022
8-9-2010
7:12
Pagina 022
Gas Tanks
CRUISE SPEED "HEAVY METAL"
TORPEDO STYLE CUSTOM GAS
TANKS
Cruise Speed gas tanks are the strongest
gas tanks on the market as they are made
from heavy gauge steel with lap joints
throughout. These Torpedo Style Custom
gas tanks feature a ridge line from front to
rear. Low Tunnel tanks have a 21 3/4"
(55 cm) long and 2 1/2" (6.3 cm) wide
tunnel, are 9 3/4" (almost 25 cm) wide,
8 1/2" (21 cm) high and hold 3 1/8 Gallon
(12 Liters) of fuel. High Tunnel tanks have a
23" (58.5 cm) long and 2 3/8" (6 cm) wide
tunnel, are 12" (30.5 cm) wide and hold
3 3/8 Gallon (13 Liters) of fuel. Both High
and Low Tunnel tanks are available for use
with a stock style cam lock or stock style
screw-in type gas cap.
Low Tunnel tanks
930183 For use with cam lock style gas
cap
930184 For use with screw-in style gas
cap
23 1/2" long chopper tanks for
4 1/2" stretched frame
011703 Complete with flush mount
chrome pop-up gas cap (Style G)
011704 Complete with raised bung
chrome pop-up gas cap (Style G)
011918 Replacement chrome pop-up
gas cap
High Tunnel tanks
930178 For use with cam lock style gas cap
930179 For use with screw-in style gas cap
19
CRUISE SPEED "HEAVY METAL"
TEARDROP STYLE CUSTOM GAS
TANKS
Cruise Speed gas tanks are the strongest
gas tanks on the market as they are made
from heavy gauge steel with lap joints
throughout. These Teardrop Style Custom
gas tanks have a 23" (58.5 cm) long and
3" (7.5 cm) wide tunnel, are 15" (38 cm)
wide and hold 4 3/4 Gallons (18 Liters) of
19-022
IMAGE SERIES STRETCHED
CHOPPER TANKS
These Image Series chopper tanks are real
smooth looking pieces of art and really
complete the smooth looks of North Sea
Chopper frames or other frames with a 4"
stretch in the downtubes, 3" minimum
backbone stretch, and a top tube not
exceeding 1 1/2" in diameter. The tanks
come with weld-on mounting brackets,
which are recessed in the bottom of the tank
for a smooth hidden look. Tanks are tapped
1/8"-27 NPT at the rear of the tank for the
fuel crossover line, and must be used with a
13/16" (22 mm) petcock. Capacity is
approx. 5.2 US Gallon (19.5 Liter) for the
shortest version. Tanks are supplied
complete with your choice of a flush mount
or raised bung chrome pop-up gas cap. The
6" stretched version is also available for use
with a stock style screw-in type gas cap.
fuel.Tanks are available for use with a stock
style cam lock or stock style screw-in type
gas cap.
930170 For use with cam lock style gas
cap
930171 For use with screw-in style gas
cap
10300002_ZOD_H19_UK_023
8-9-2010
7:13
Pagina 023
Gas Tanks
IMAGE SERIES STRETCHED CHOPPER TANKS
A number of great designs in our Image Series are these stretched
chopper tanks. Smooth looking and enhancing the lines of our High
Neck Chopper frames. Also look great on any frame with stretched
downtubes and 3" or more stretch in the backbone.Tanks come with
weld-on mounting brackets, which are recessed in the bottom of the
tank for a smooth hidden look. The rear of these tanks are tapped
1/8"-27 NPT to take a fuel crossover line, and must be used with a
13/16"(22 mm) petcock. Tanks are available complete with chrome
pop-up gas cap in flush mount or raised bung style, or as a screw-in
style tank without gas cap.
23" long chopper tanks with standard tunnel for up
to 1 1/2" top tubes
011664 Complete with flush mount chrome pop-up gas cap
(Style G)
011665 Complete with raised bung chrome pop-up gas cap
(Style G)
PRO IMAGE 2 SERIES STRETCHED GAS TANKS
These indented design gas tanks are very smooth looking and enhance
the lines of the High Neck Chopper frames. Available for frames with
4” or 6” down tube stretch and 3” minimum backbone stretch. The
tunnel easily fits top tubes up to 2” diameter.Tanks come with weldon mounting brackets, which are recessed in the bottom of the tank
for that smooth hidden look. The rear of the tank is tapped
1/8”-27 NPT to take a fuel crossover line. To be used in combination
with a 13/16” (22 mm) petcock.
Tanks for 4” stretched frames (17 ltr.)
012116 Complete with flush mount chrome pop-up cap (Style G)
Tanks for 6” stretched frames (19.5 ltr.)
012119 Complete with flush mount chrome pop-up cap (Style G)
23" long chopper tank with extra wide tunnel for
up to 2 3/8" top tubes
011946 Complete with flush mount chrome pop-up gas cap
(Style G)
25" long chopper tanks for 6" stretched frames
with up to 2" top tubes
011935 Complete with flush mount chrome pop-up gas cap
(Style G)
011939 For screw-in type gas cap (Style B)
26 1/2" long chopper tanks for 7 1/2" stretched
frames with up to 2 1/4" top tubes
011936 Complete with flush mount chrome pop-up gas cap
(Style G)
011918 Replacement chrome pop-up gas cap
19
CUSTOM ALUMINUM GAS TANK FOR TWIN CAM
SOFTAIL MODELS WITH POP UP GAS CAPS
This tank is designed to fit the 2000 to present Twin Cam Softail
models. Tank has very smooth flowing lines and is narrow ended on
the seat side. Can be used to replace the standard tank, but will not
work with stock seat.Tank includes an aluminum dash, and two popup type gas caps. Holds approximately 4.25 gallon of fuel (16 ltr.).
722079 Tank with dual pop-up gas caps
19-023
10300002_ZOD_H19_UK_024
8-9-2010
7:14
Pagina 024
Gas Tanks
CUSTOM ALUMINUM GAS TANK FOR TWIN CAM
SOFTAIL, AND 1989 TO PRESENT SPORTSTER MODELS
European made aluminum Custom tank as a bolt-on tank for 2000 to
present Twin Cam Softail models, but also fits 1989 to present
Sportster models when you order the optional bracket kit ZPN
722082.This Custom tank will greatly improve the looks of your bike.
It is a direct replacement for the standard tank and fits with the stock
seat without any trouble and features swage line that accents the
tank line. Tanks are available with aluminum dash, to take the
OEM dash, or as a smooth top tank. Tank holds approx-imately
4.25 gallon of fuel (16 ltr.). Tanks with dash or dash-mount take the
stock screw type gas cap. The smooth top tank takes gas cap
ZPN 237353.
722078 Custom aluminum fuel tank with aluminum dash
722084 Custom aluminum fuel tank for OEM dash
722081 Custom aluminum fuel tank, smooth top
722082 Optional bracket kit for 1989 to present Sportster
models
19
CUSTOM ALUMINUM GAS TANKS
These gas tanks are manufactured by Europe’s leading manufacturer
of aluminum gas tanks. For decades many factory race teams used
them to manufacture strong and light weight gas tanks for their race
bikes. Since a few years they are making special designed, high quality
aluminum Custom tanks for the Harley-Davidson aftermarket. We
offer a wide variety of these handcrafted aluminum tanks. Each tank
is hand formed and hand welded by guys that know what they are
doing. Years of experience made them the best in the industry. All
tanks are leak-tested before they leave the factory. Available as a
bolt on for Sportster models, Softail models, FXR models, Dyna Glide
models as well as a number of models for the Custom builder that
wants to fit it on a “One-Off” Custom frame. Tanks can be Custom
painted or polished to a chrome-like finish.Also check out the pricing
of these tanks. For the high quality product they are very economically
priced.Tanks include mounting brackets where needed.All tanks have
single gas cap, caps are not included. The racing type caps can be
bolted-on as tank come with a flat surface and threaded holes, these
tanks also have inside breather tube. For those with an eye for detail
we offer most models with a Swage Line.
Fits Sportster models, 2.9 gallon/11 ltr. takes gas
cap ZPN 232153 or 232154
711228 Sporty Peanut Aero
711239 Sporty Peanut Aero, with Swage Line
Fits FXR models, 4 gallon/15 ltr. takes gas cap ZPN
232153 or 232154
711230 FXR Aero
19-024
10300002_ZOD_H19_UK_025
8-9-2010
7:15
Pagina 025
Gas Tanks
Fits FXR models, 4 gallon/15 ltr. takes gas cap
ZPN 232153 or 232154
711238 FXR Aero with Swage line
Custom Cruiser Teardrop Tank with 5” stretch,
4 gallon/15 ltr., takes gas cap ZPN 237353, 237354 or
237359, fits most 5” stretched frames
711282 Super Cruiser 5” stretch
Fits Evolution Softail models, 4 gallon/15 ltr. takes
gas cap ZPN 232153 or 232154
711227 Softail Aero
711240 Softail Aero with Swage Line
PEANUT STYLE ALUMINUM CHOPPER TANK
Take a classic peanut style gas tank, bang it around a bit, stretch it
to 23 1/2” length, add a flush mount pop-up gas cap and this is what
you get: a great looking Peanut style Chopper tank. Comes complete
with custom weld-on brackets.
741275 Peanut style aluminum chopper tank
19
Fits Dyna models, 4 gallon/15 ltr. takes gas cap ZPN
232153 or 232154
711229 Dyna Aero
711241 Dyna Aero with Swage line
TON PELS’ SIGNATURE SERIES ALUMINUM TANK FOR
GODFATHER FRAME
This custom aluminum fuel tank matches the flowing lines of the
Godfather frame. Has a capacity of 6 gallon (22.5 liter) and takes gas
caps ZPN 237353, 237354, and 237359.
722083 Tank for Godfather frame
Custom Cruiser Teardrop Tank with 2” stretch,
2 3/4 gallon/12.5 ltr., takes gas cap ZPN 237353,
237354 or 237359, fits most 2” stretched frames
711455 Custom Cruiser 2” stretch
19-025
10300002_ZOD_H19_UK_026
8-9-2010
7:17
Pagina 026
Gas Tanks
CUSTOM TANKS
Custom made models for stock and after market frames. When
installing these tanks it may be necessary to modify or make Custom
brackets. We have indicated what type frame they are intended for
but with Custom made brackets they will fit any frame. Fits Softail
style, Softail stretched frames as well as Ness type stretched frames.
CUSTOM ALUMINUM SMOOTH TOP GAS TANK FOR
TWIN CAM SOFTAILS
A Custom tank with smooth top to fit 2000 to present Twin Cam
Softail models.This aluminum gas tank has very smooth flowing lines,
with a very narrow end on the seat side. This tank can be used to
replace the standard tank.Will not work with the stock seat, must use
narrow front aftermarket seat. Gas tank takes a center fitted Aero
type gas cap ZPN 237353, 237354 or 237359. Gas cap must be
ordered separately. Tank holds approx. 4.25 gallon of fuel.
722085 Twin Cam Softail Custom aluminum gas tank
19
CUSTOM ALUMINUM KING CRUISER TANK
With its 65 cm (25,6”) length it is one of the longest custom fuel
tanks available to day. Takes 5,5 gallon (21 liter). Comes complete
with pop-up gas cap and custom weld-on mounting brackets.
741255 Custom alu King Cruiser tank extra long
FishTail model, 5 gallon/19 liter takes gas cap ZPN
237353, 237354 or 237359
711233 FishTail 2” Stretched
711242 FishTail 2” Stretched with Swage Line
FishTail model, 6 gallon/22.5 liter takes gas cap ZPN
237353, 237354 or 237359
711234 FishTail 5” Stretched
711243 FishTail 5” Stretched with Swage Line
Custom Softail, 4.2 gallon/16 liter takes gas cap ZPN
232153 or 232154
711231 Softail 5” Stretched
711244 Softail 5” Stretched with Swage Line
19-026
10300002_ZOD_H19_UK_027
8-9-2010
7:18
Pagina 027
Gas Tanks
Super 2” stretch model, 6 gallon/22.5 ltr. takes gas
cap ZPN 237353, 237354 or 237359
711235 Super Stretch 2”
711245 Super Stretch 2” with Swage Line
Super 5” stretch model, 6.9 gallon/26 ltr. takes gas
cap ZPN 237353, 237354 or 237359
711236 Super Stretch 5”
711246 Super Stretch 5” with Swage Line
Limited Series King Cruiser Swage Line
Tank capacity 5.5 gallon (21 liter). Accepts Aero gas cap ZPN
232130 or 232136. Over all length 65 cm, 38 cm wide in front,
9 cm wide on the rear and 19 cm maximum height.
711586 Limited Series King Cruiser Tank
Custom Super Cruiser with 5" stretch
Tank capacity 4.5 gallon (17 liter). Accepts Aero gas cap ZPN
232130 or 232136. Tank is 63 cm long, 35,5 cm front width,
8.5 cm rear width, and 19 cm high.
711587 Custom Super Cruiser Tank
19
Softail Super 5” stretch model takes gas cap ZPN
237353, 237354 or 237359
This tank fits most 5” stretched Softail-style frames. The tank
sits lower at the rear, covering the frame tubes giving a
smoother line to the finished bike.
711237 Custom Softail 5” Stretch
Limited Series Cruiser Swage Line
Tank capacity 4.4 gallon (16.5 liter). Accepts OEM style screwin gas cap. Tank is 63 cm long, 31 cm wide in front, 5 cm wide
in rear and 22 cm high.
711588 Limited Series Cruiser Tank
Fits Sportster type and Rigid frames,
4.5 gallon/17 ltr. takes gas cap 232153 or 232154
711232 Sporty Peanut Stretched
19-027
10300002_ZOD_H19_UK_028
14-10-2010
17:14
Pagina 028
Gas Tanks
New Softail with 5” stretch Swage Line
Tank capacity 4.2 gallon (16 liter). Accepts Aero gas cap ZPN
232130 or 232136. Tank is 63 cm long, 9 cm wide in the rear,
33 cm wide in front and 23 cm high.
711589 New Softail 5” Stretch tank
Limited Series Softail with 5" stretch Swage Line
Tank capacity 4.2 gallon (16 liter). Accepts Aero gas cap ZPN
232130 or 232136. Tank is 63 cm long, 9 cm wide on the rear,
33 cm wide in front and 23 cm high.
711590 Limited Series Softail Tank
Limited Series Super Cruiser with 5” stretch Swage
Line
Tank capacity 4.2 gallon (16 liter). Accepts Midi-Aero gas cap
ZPN 237353, 237354 or 237359. Tank is 63 cm long, 9 cm
wide on the rear, 34,5 cm wide in front and 19 cm high.
711592 Limited Series Super Cruiser Tank
King Super Cruiser
Tank capacity 4.6 gallon (17.5 liter). Accepts the large Aero gas
cap ZPN 232130 or 232136. Tank is 63 cm long, 9 cm wide at
the rear, 40.5 cm wide in front and 19 cm high.
711593 King Super Cruiser Tank
19
King Chopper
Tank capacity 4.8 gallon (18 liter). Accepts Aero gas cap ZPN
232130 or 232136. Tank is 61.5 cm long, 5 cm wide on the
rear, 40.5 cm wide in front and 22 cm high.
711591 King Chopper Tank
19-028
King Super Stretch Swage Line
Tank capacity 6.2 gallon (23.5 liter). Accepts the large Aero gas
cap ZPN 232130 or 232136. Tank is 62 cm long, 14 cm wide in
the rear, 38 cm wide in front and 22 cm high.
711594 King Super Stretch Tank
10300002_ZOD_H19_UK_029
8-9-2010
7:21
Pagina 029
Gas Tanks
New 2” Super Stretch Swage Line
Tank capacity 4.6 gallon (17.5 liter). Comes complete with popup gas cap and custom weld on mounting brackets. Tank is
57 cm long, 13 cm wide on the rear, 38 cm wide in the front
and 22 cm high.
711595 New Super Stretch Tank with pop-up gas cap
CUSTOM ALUMINUM GAS TANK
If you want the ultimate Custom stretched handmade aluminum gas
tank that fits our Ton Pels Signature Series “Godfather” frame, or any
other Custom frame your search is over.This tank is welded by experts
and leak tested before it leaves the factory. Available with the flush
mount pop-up cap for the ultimate Custom look. Tank contains
3.6 gallon/14 liters, and has a tunnel length of 24.4” (620 mm). You
do not have to make your own Custom bracket set because we already
put one in, which has to be welded onto the frame.
741195 Custom aluminum chopper tank
ROLAND SANDS DESIGN VINTAGE FUEL TANK KIT
FOR TWIN CAM SOFTAILS
This kit contains steel gas tank with steel backbone cover and all
necessary hardware. Tunnel mounts to stock location and allows for
use of stock ignition switch and key. Tank holds approximately
2.5 gallon (9.5 liter). The kit for EFI equipped Softails also includes
the Gas-it fuel injection kit. Using the stock EFI components this kit
relocates the fuel pump, regulator and filter to the underside of the
tank. Giving you numerous possibilities for customization. Weld in
steel manifold and all fasteners are included. Special RSD gascap is
not included, can be found elsewhere in this chapter.
740631 Carbureted fuel tank with backbone cover for 2000 thru
2006 Softail
740632 EFI fuel tank with backbone cover and Gas It kit for
2001 to present Delphi Fuel Injected Softail
740633 Carbureted gas tank only
740634 EFI gas tank only
740635 Steel backbone cover only
740630 Gas it fuel injection kit only
If you start from scratch to build a Fuel Injected
custom you will also need
740766
Fuel pressure regulator (OEM 27408-01)
740767
Fuel filter with clamps, O-ring and hose
(OEM 61001-01)
740768
Fuel sender kit (OEM 75300-05)
740769
Fuel pump assembly (OEM 62897-01B)
740770
Check valve assembly with O-ring
(OEM 62189-01A)
19
19-029
10300002_ZOD_H19_UK_030
8-9-2010
7:22
Pagina 030
Kreem Produkts & Gas Tank Mounting Hardware
KREEM COMBO PACK
The Kreem tank prep and sealer kit to create
an excellent “tank within a tank”. The
advanced formula cures to a tough white
skin which protects the inside of the tank
from rust and corrosion. Resists leaded and
unleaded gasolines, gasohol and octane
boosters or fuel additives when used in
recommended concentrations.Available in a
complete kit including the sealer and the
tank prep, or separately.
232020 Kreem combo pack
232021 Kreem liner/sealer
232022 Kreem prep and cleaner
19
19-030
KREEM TANK DEGREASER
This safe biodegradable degreaser quickly
removes protective oily coatings from the
inside of new tanks. Recommended for use
prior to Kreem Tank Seal and/or Kreem Tank
Prep. Assures a clean oil free surface.
Excellent as a general purpose cleaner and
degreaser. Sold in 1 pint (568 cc) bottles.
232030 Kreem Tank Degreaser
KREEM TANK MASK
You have a beautiful painted tank and now
it is leaking. The solution is to use Kreem
Fuel Tank Liner ZPN 232020. But how to
keep the paint job as beautiful as it was?
Here is the answer: Kreem Tank Mask. It is
a water-based liquid mask that is easily
applied to painted tanks and other painted
surfaces. Paint it on, let it dry to a nontacking film and you can use Kreem Fuel
Tank Liner without causing damage to the
paint job.When you are ready you can simply
wash Kreem Tank Mask away with warm
soapy water. Kreem Tank Mask is resistant to
Kreem Fuel Tank Liner and Kreem Tank Prep
and comes in 8 fl.oz. (285 cc) bottles, usually
enough for a motorcycle fuel tank.
232031 Kreem Tank Mask
CUSTOM ALU TANK MOUNTING
KIT
Replacement steel bracket set for our Softail
Aluminum fuel tanks. Can also be used for
other custom fuel tanks. Includes steel
brackets and rubber grommets.
711572 Tank mounting kit
MOUNTING KIT FOR FAT BOB
TANKS
Complete mounting kit, a must when
installing OEM or Zodiac’s Fat Bob tanks to
Custom or original 4 Speed frames. Includes
all necessary washers, spacers, bolts and
nuts.
345127 Mounting kit for Fat Bob tanks
COLONY GAS TANK MOUNTING
KITS
High quality, show chrome tank mount
hardware kits for Softail and Dyna models
1991 to present.These kits include all bolts,
nuts, studs and washers needed to mount
the tank.
741833 Gas tank mounting kit 1991 to
present Dyna models
741832 Gas tank mounting kit
1991 thru 1999 Softail models
741834 Gas tank mounting kit 2000 to
present Softail models
10300002_ZOD_H19_UK_031
8-9-2010
7:23
Pagina 031
Gas Tank Mounting Hardware
CUSTOM GAS
TANK INLET
Weld in gas tank inlet, usable when building your own Custom made gas tank or as
replacement for worn out connectors.Takes
any of our vented cam-lock type gascaps.
011352 Tank inlet
UNIVERSAL FAT BOB TANK
MOUNT KIT
Uniquely designed mounting kit for Fat Bob
tanks. A precise way to mount the OEM or
aftermarket Fat Bob tanks to Custom or
original frames that have the OEM
mountings removed. Allows you to locate
the bracket for a visual check of the tank
location on the frame and once the position
is selected the whole bracket set can be
welded in place.
012367 Quickmount kit for Fat Bob
tanks
ANTI-VIBRATION GROMMETS
Install in the tank mount holes on Fat Bob
tanks to stop the solid vibration that cracks
the tank mounting flanges. Also for many
Custom applications (pack of 10).
358074 Anti vibration grommets
FLAT-SIDE TANK MOUNTING KIT
A complete mounting kit that can be used
to update your existing Flat-Side tank
mounts, or for use on newly constructed
vehicles instead of purchasing the original
parts. The beveled washers and mounting
screws are chrome-plated. Fits 1984 to
present Softail, and all other models with
split tanks from 1985 to present.
345228 Flat Side tank mounting kit
LOWER FRONT MOUNTING
BRACKET FOR FAT BOB TANKS
An exact reproduction of the lower bracket
as featured on the 4 Speed frames thru
1984. Easy to weld on and can be adapted
to many Custom frames. Restores original
looks and enables you to use Fat Bob tanks
when the original bracket was torched off.
012357 Front lower bracket
RUBBER MOUNTS FOR FLATSIDE
GAS TANKS
Accurate reproductions of the Original
Equipment parts used to mount the Flatside
gas tanks on 4 Speed FX models from
1985 thru 1986, and all Softail models from
1984 to present. Pack of 6 (OEM 11447 and
5775).
358084 Rubber mounts
FLAT-SIDE FAT BOB MOUNTING
KIT FOR CUSTOM FRAMES
A complete mounting kit to install Flat-side
Fat Bob tanks to a Custom frame. Black
powder coated brackets, chrome fasteners,
dash spacers, tank grommets and mounting
instructions are included.
238327 Tank mounting kit for Custom
frames
MOUNTING HARDWARE KIT FOR
ONE PIECE SOFTAIL GAS TANK
A complete mounting kit to install a one
piece gas tank on a Softail model. Same kit
as supplied with our one piece Softail gas
tanks.
346103 Mounting kit for Softail tank
19
FLAT-SIDE TANK MOUNTING KIT
FOR EARLY FRAMES
An easy-to-install mounting kit, which
makes it possible to mount the late style
Flat-Side gas tank on your early style
4 Speed Big Twin frame.The rubber isolation
will prevent the damage of leaking fuel by
breaking welds. Kit comes complete with all
brackets and necessary hardware.
011498 Flat-Side tank mounting kit for
early frames
19-031
10300002_ZOD_H19_UK_032
8-9-2010
7:25
Pagina 032
Gas Tank Mounting Hardware & Petcocks
SHUT-OFF VALVE FOR EARLY FAT
BOB TANKS
Very precise reproduction of the Big Twin
1947 thru 1966 tank shut-off valve. This
completely assembled unit comes with rod,
cap knob, all washers, seals and hardware.
Can also be used on 45CI models but
changes the reserve capacity.
711854 Shut-off valve
SHUT-OFF VALVE
EXTENSION
KNOB
Allows easier operating of the old style shutoff valve, as used on the 1940 thru 1966
models.
032448 Extension knob
PINGEL IN-LINE FUEL VALVE
Pingel designed this in-line fuel valve with
the Custom bike builder in mind, giving you
a chance to express your creativity without
worrying about the fuel valve location. The
valve uses a simple on/off operation without
a reserve capacity and without a fuel filter.
Has a chrome finish.
744250 In-line fuel valve
19
CHROME PETCOCK
These petcocks are highly polished and than
chrome plated, a real “Wannahave” for each
custom builder with eye for detail. Petcocks
are designed to maximize fuel flow in both
main and reserve modes. Feature 22 mm
metric petcocks fit all 1975 to present Big
Twin and Sportster models as well most
Custom tanks.
022600 Left side single outlet
022601 Right side single outlet
022602 Downward single outlet
FUEL VALVE O-RINGS
Viton O-rings as fitted between the fuel
valve and tank adapter on 2002 thru
2006 Big Twin and Sportster. Genuine
James. Sold in dealer 5-packs.
742488 Viton O-ring, 5-pack
(OEM 62712-02)
RSD "GAS-IT" FUEL INJECTION KIT
Designed by Roland Sands Designs, this fuel
injection kit uses the OEM Harley-Davidson
EFI components to relocate the fuel pump,
regulator and filter to the underside of the
gas tank.This opens up endless possibilities
for you Custom job.The stainless steel weldin tank part measures 3 3/4" x 8"
(9.5 cm x 20.3 cm). Tank bottom must be
relatively flat to accommodate port
installation. Custom fabrication required. Kit
comes with weld-in steel manifold and
fasteners.
740630 Gas it fuel injection kit only
If you start from scratch you will
also need
740766 Fuel pressure regulator
(OEM 27408-01)
740767 Fuel filter with clamps, O-ring
and hose (OEM 61001-01)
740768 Fuel sender kit (OEM 75300-05)
740769 Fuel pump assembly
(OEM 62897-01B)
740770 Check valve assembly with
O-ring (OEM 62189-01A)
19-032
10300002_ZOD_H19_UK_033
8-9-2010
7:26
Pagina 033
Gas Tank Mounting Hardware & Petcocks
PINGEL FUEL VALVE ADAPTERS
FOR FUEL INJECTION TO
CARBURETOR CONVERSIONS
To convert 1995 thru 2001 fuel injected
FLH/FLT series models to a carburetor system
you need an adapter to fit a fuel valve to the
stock gas tank. Because of the tight
tolerances these adapters can only be used
with our Pingel high flow fuel valve. These
adapters are available for bikes that were
originally fitted with either Magneti Marelli
or Delphi fuel injection. Fuel valve must be
ordered separately.
744252 For 1995 thru 2001 FLH/FLT
series models originally
equipped with Magneti Marelli
fuel injection
744253 For all models originally
equipped with Delphi fuel
injection
ACCEL HIGH-FLOW FUEL VALVES
The Accel “High Flow Fuel Valve Kits”
feature a 100 micron screen filter, on/off and
reserve positions packaged into a show
chrome quality housing. This makes the
Accel High Flow Fuel Valve Kit an easy cure
for high RPM fuel starve that can cause
detonation and eventual engine failure.
Accel recommends the installation of a high
flow valve with any modification to your
motorcycle that increases RPM and
acceleration, such as air filter, exhaust,
camshaft etc. Available with straight down
spigot or side spigot with a 180 degree
swivel. Fits most models 1971 to present.
PETCOCKS WITH NUT
CONNECTION
Disc type petcocks with mesh filter screen.
Come with 13/16” chrome nut. Available
with straight down spigot, right side spigot,
and left side spigot. Fits OEM tanks
1975 thru 1982, and most custom tanks
with external 13/16” connection.
011401
Straight down spigot, fits
1975 to present
233821 With 180 degrees rotatable
side spigot
011403 Left side spigot
PINGEL FUEL
INJECTION
CONVERSION
When you want
to convert your
carbureted engine
to fuel injection
this is what you
need.A conversion
adapter designed
to supply fuel to a
fuel
injection
system with one
outlet, while
returning fuel to the tank with one inlet.The
manifold has a 22 mm connection and is
chrome plated.
744254 Pingel Fuel Injection conversion
22 mm
231937 With straight down spigot
011405 Right side spigot
19
OLD STYLE PETCOCK
This chrome plated Harley style petcock fits
early Harley and most Custom gas tanks
with 3/8” NPT internal connector
(OEM 62125-55B).
011170 Old Style Petcock
REPLACEMENT
SEALS FOR DISC
TYPE ZODIAC
PETCOCKS
These Viton seals fit behind the face plate
of all Zodiac disc-type petcocks. They solve
the problems associated with various types
of fuels available today, including the (lead
free) Ethanol-type gasoline. Available with
4 holes for old-style petcocks and with
3 holes for the newer type petcocks. Sold in
10-packs.
011415 Viton gaskets, 4 holes
011494 Viton gaskets, 3 holes
19-033
10300002_ZOD_H19_UK_034
8-9-2010
7:28
Pagina 034
Petcocks
PETCOCKS WITH BRASS FILTER
With 90 degrees spigot, fits 1975 to present (disc-type) or with
straight spigot, fits OEM and Custom tanks 1975 to present
(OEM 62163-75) (disc-type).
011413 90 Degrees
011411
Straight
PETCOCKS WITH EXTERNAL THREAD
With 90 degrees spigot, fits all pre 1975 gas tanks and Custom tanks
with 3/8" NPT internal connector (disc-type) or with straight spigot,
fits all pre 1975 gas tanks and Custom tanks with 3/8" NPT internal
connector (OEM 62125-55B) (disc-type).
011407 90 Degrees
19
011409 Straight
PINGEL ROUND KNOB HIGH FLOW PETCOCK
Featuring the same high flow body as the “Designer” petcock ZPN
236300.Although they have the same chromed body, this petcock is
equipped with a round knob to control the ON, RESERVE and OFF
positioning. Input via 22mm connector, including adapter nut. Output
via 5/16” hose barb, left side.
744251 Round knob petcock
19-034
PINGEL POWER-FLO’ HIGH VOLUME PETCOCKS
These petcocks have all the features of the standard Power-Flo’
petcocks with the exception that they are specially designed for use
with the 1975 to present Original Equipment gas tanks. They have a
more compact installation saving around 1/4” installed height over
the standard Power-Flo’.Available in polished aluminum and chrome
plated finish.
Single outlet
Polished
Chrome
236330
236331
236332
236333
236334
236335
236336
236337
Forward
Backwards
Side
Under
Race petcock Dual outlet facing under motorcycle
Polished
Chrome
236338
236339
With reserve
236340
N/A
Without reserve
PINGEL VACUUM FUEL
VALVE
Finally a high performance direct
OEM replacement vacuum operated
fuel valve. This vacuum operated fuel
valve has the highest fuel flow of any
vacuum style fuel valve on the market.
These fuel valves have the same safety
feature as an OEM. When the valve is
left in the “On” position, with the
motor off, the fuel flow will be shut
off automatically. These valves feature
a high quality, lustrous chrome finish.
Pingel Vacuum Fuel Valves are
available in H-D Metric with Adapter Nut.
741226 Left side mount hose outlet facing forward
741227 Left side mount hose outlet facing to the rear
741228 Left or right side mount hose outlet down
10300002_ZOD_H19_UK_035
8-9-2010
7:29
Pagina 035
Petcocks
CHOPS 76 PETCOCKS
These great looking petcocks are a perfect example how Italian design
can add a classy touch of style to your American machine. Available
in chrome plated aluminum or polished-to-perfection pure bronze
with left or right exit. Fits all stock and aftermarket gas tanks with
male 22 mm connection.
743428 Chrome, left exit
743436 Chrome, right exit
743429 Brass, left exit
743437 Brass, right exit
PINGEL "DESIGNER" HIGH FLOW PETCOCKS
These “Designer” petcocks are manufactured from solid brass to very
strict specifications and tight tolerances. Bodies are highly polished
and than chrome plated and are available with either smooth or
machined designs. Pingel Petcocks are the ultimate choice for the
Custom builder with an eye for detail.They come in smooth, grooved,
light Stripes, Diamond or Flamed design. The inside of these high
volume petcocks have the same features as Pingel’s Power Flow’
petcocks. The unique design maximizes the fuel flow on both main
and reserve. Petcocks are available for all model Big Twin and
Sportster late and early gas tanks. The 22 mm metric petcocks fit all
Big Twin and Sportster 1975 to present. The petcock with 3/8” NPT
thread fits pre-1975 as well as fit most Custom gas tanks.All models
petcock are available in forward, backward or down outlet Designer
petcock with 22 mm thread.
19
Fits all Sportster and Big Twin models 1975 to
present
Forward
Backwards
Side
236300
236310
236320
Smooth
236301
236311
236321
Grooved
236302
236312
236322
Lightning
236303
236313
236323
Diamond
236304
236314
236324
Flamed
Designer petcock with 3/8” NPT thread Fits all pre1975 models and most Custom gas tanks
Forward
Backwards
Side
236305
236315
236325
Smooth
N/A
236316
N/A
Grooved
N/A
236318
236328
Diamond
19-035
10300002_ZOD_H19_UK_036
8-9-2010
10:20
Pagina 036
Petcock
PINGEL POWER-FLO’ HIGH VOLUME PETCOCKS
These high volume, high performance petcocks are manufactured in
the U.S.A. by Pingel Enterprises. The unique design maximizes fuel
flow on both main and reserve making the Power-Flo’ petcock
unequalled in fuel flow by any other petcock manufactured for a
motorcycle. All petcocks are available with an easy twist lever and
offer more reserve than stock gas valves. These Power-Flo’ petcocks
feature a polished aluminum or chrome plated brass body of
1 1/8” hex with a total length from bottom of the threads to the
bottom of the valves of only 1 1/4”. This ultra compact size permits
their installation in even the tightest clearances. The machine cut
3/8” NPT threads of the valve body fits stock gas tanks thru 1974 as
well as most aftermarket Custom tanks. The optional adapter nut
permits installation on the 1975 to present Original Equipment,
Zodiac and most other after market gas tanks. High quality o-rings
insure leak proof seal. Stainless steel components with stainless steel
fuel screen are included. The dual outlet version can be used for
Nitrous Oxide systems (one outlet for carburetor/fuel pump feed and
the other as a fuel return from the fuel pump).
234400 Single outlet 90 degr. aluminum
234401 Single outlet 90 degr. chrome
234403 Single outlet down, aluminum
234404 Single outlet down, chrome
234402 Dual outlet, aluminum
234405 Adaptor nut, permits installation on OEM or aftermarket
gas tanks with 7/8" or 22 mm male tank bung, chrome
finish
19
PINGEL OLD SKOOL STYLE
BRASS PETCOCKS
Pingel's Old Skool style fuel valves
feature the same internal design as all
their other fuel valves. This design
maximizes fuel flow on both main and
reserve. Made from solid brass with a
high luster polished finish for that
classic appearance. Available in
3/8 NPT for use on pre-1975 and most
custom gas tanks and 22 mm for use
on 1975 to present style gas tanks.
744258 Pingel 3/8 NPT brass fuel valve
744259 Pingel 22 mm brass fuel valve
19-036
PINGEL ELECTRO-FLO
FUEL VALVE
Pingel's Electro-Flo fuel valve
offers a unique feature as it
will not allow the motorcycle
to start unless the valve is in
the On-position. The result is
no more forgetting to turn the
fuel on, starting the bike, and
taking off only to have the bike
kill because it has run out of
fuel. The Electro-Flo fuel valve
utilizes Pingel's "Guzzler"
impressive 211 oz. (over
6 Liter!) per minute flow rate
along with outstanding race-tested durability. Available with 22mm
or 3/8" NPT fitting, both featuring a 5/16" (8 mm) hose fitting. The
Electro-Flo is made from solid billet aluminum and has a high luster
polished finish.
744256 Electro-Flo fuel valve, 22 mm fitting
744257 Electro-Flo fuel valve, 3/8 NPT fitting
PINGEL CHOPPER VALVE
The Pingel Chopper Valve has been designed for use on motorcycles
that have custom fuel tanks that are raised high in the front. This
style of fuel tank usually does not allow proper fuel pick up when
using a standard petcock with reserve position. Pingel's Chopper
Valve allows the builder to keep the bottom of the tank clean from
fuel lines.The custom builder now has universal options for mounting
the fuel valve by utilizing the mounting holes on the back of the valve.
This fuel valve has smooth clean lines featuring a compact design
measuring 1-1/2" (38 mm) high x 2" (51 mm) long x 1 3/8" (35 mm)
deep. There is an easy to operate position selector knob with a ball
detent for positive On-Off-Reserve locating.All hose barbs are 5/16".
The Chopper Valve will require two hoses to be routed from the fuel
tank - one for the ON position and one for the RESERVE position.The
Chopper Valve is designed for exceptional fuel flow to feed the
thirstiest of big inch engines. CNC machined from a solid piece of
billet brass and finished with lustrous show quality chrome.
744255 Pingel Chopper fuel valve
10300002_ZOD_H19_UK_037
8-9-2010
10:21
Pagina 037
Fuel Pump & Fuel Filters
S&S FUEL PUMP KIT
Customizing a fuel injected bike can be a
real agony. Where to find a cool tank that
can hold an OEM style fuel pump.This smart
design fuel pump kit from S&S helps you out.
Due to its small dimensions it can be fitted
in nearly any stock or aftermarket fuel tank.
The capacity of 67 Liter per Hour, while
boosting a pressure of 4 bar/55 PSI, is well
within needs for most bikes. The pump is
secured by hollow mounting bolts.The bolts
provide an outlet for wiring and pressurized
fuel.A fiber media filter, placed at the lowest
point in the tank prevents contaminants
from damaging the pump or clogging fuel
injectors.The kit includes the fuel pump, inlet
hose, filter, hardware and complete
mounting instructions.
750862 S&S Fuel pump kit
FUEL LINE "T" JUNCTION
Provides maximum flow, durable, light weight,
and is easy to use. One size fits all fuel lines
with 3/16” to 3/8” inside diameter (4.7 mm
to 9.5 mm). Sold in a shop pack of 12.
233792 Fuel Line T
FILTER ELEMENT FOR PINGEL
INLINE FUEL FILTERS
Replacement bronze filter elements for the
Pingel In-Line fuel filters. Filters down to
10 microns in size and is for use for fuel
injection only. Comes with O-ring included.
234413 Filter element bronze
PINGEL FUEL VALVE ADAPTER
FOR 1935 THRU 1965 STYLE SPLIT
GAS TANKS
Pingel's stainless steel fuel valve adapter
offers better flow and still retains the stock
crossover connection on 1935 thru
1965 two-piece gas tanks. In conjunction
with a 22 mm Pingel Power-Flo or Guzzler
fuel valve this will drastically improve fuel
supply. A must on tuned and especially
today's high performance engines as the
stock fuel valve set up simply can not cope
with their fuel demand.
744249 Pingel Big Twin fuel valve
adapter
PINGEL IN-LINE FUEL FILTERS
These American made polished aluminum
High Performance fuel filters flow more fuel
than most other filters. Weights only
3 ounces and has the ability to flow up to
51 ounces per minute. The 2-piece billet
aluminum housing supports a pleated recleanable lifetime stainless steel element
which filters down to 40 microns in size, yet
does not permit any restriction of fuel flow.
The body length of these filters is only
1 1/8” (30 mm). Filter fits 5/16” (8 mm)
inside diameter fuel line.
234408 Pingel In-line fuel filters
19
VACUUM VALVE BY-PASS KIT
Vacuum operated petcocks are often leaking
or give a poor fuel flow. With this by-pass
kit you can easily prevent these kind of
problems. Kit contains a petcock backing
plate plus gasket and a vacuum hose plug,
will fit most vacuum operated petcocks.
237352 Vacuum valve by-pass kit
CHROME ALUMINIUM BILLET
FUEL FILTER
2-piece lightweight chrome plated billet
filter. Features a washable filter screen and
spigots that will take 5/16” (8 mm) inside
diameter fuel line. Body length is
1 1/2” (38 mm) and an outside diameter of
1 3/16” (35 mm).
120083 Chrome Billet fuel filter
19-037
10300002_ZOD_H19_UK_038
8-9-2010
10:22
Pagina 038
Fuel Catalyst & Gas Caps
TANK CONNECTOR LINE FOR
EARLY FAT BOB TANKS
Crossover gas line for Fat Bob Tanks. Fits
1948 -1965 FL models, has chrome finish
(OEM 62355-48).
012251 Tank connector line
19
19-038
FITCH FUEL CATALYST
Most fuel is made up of high-energy
constituents, which burn with a fairly high
degree of efficiency. However, in addition to
these high-energy fuel constituents, there
are others, which tend to cause problems
during the combustion process. These are
the lighter components, which burn too fast
at the beginning of the combustion process
causing pre-ignition and the heavier ones,
which burn too slowly at the end of the
process causing both excessive smoke and
carbon buildup. The Fitch Fuel Catalyst acts
on both of these problem fuel components,
insuring that they burn with the same
efficiency as the rest of the fuel.All forms of
Power Sports equipment such as
motorcycles, ATV’s, snowmobiles and
personal watercraft can benefit from the
Fitch Fuel Catalyst. Once the Fitch Fuel
Catalyst is installed the treated fuel will
begin to burn more completely resulting in
a cleaner, better running engine that will
start easier, burn less fuel and increase
power and performance. The Fitch Fuel
Catalyst helps keep your fuel fresh during
the off-season and eliminates the need for
stabilizers and other additives. The fuel
catalyst is warranted for 350.000 km or
5.000 operating hours, effectively the life of
your engine. Comes in a package of two for
both single and dual tankhalve applications.
700895 Fitch Fuel Catalyst
CHROME GAS CAPS
Vented fits all Single cap and R/H double cap
Harley and our Custom tanks. Non vented
fits all L/H double cap Harley and our
Custom tanks.
011152 Original style, vented
011179 Original style, non vented
(OEM 61103-65)
DELUXE CHROME GAS CAP
Die-cast show-chromed gas caps, available
with and without vent. The vented gas cap
fits Fat Bob style R/H tanks and all
OEM single cap tanks aswell as most of our
Custom gas tanks. The not vented gas cap
fits Fat Bob style L/H tanks.
011221 Gas cap vented
011222 Gas cap not vented
EAGLE SPIRIT GAS CAP SET
Chrome plated deluxe style Eagle Spirit gas
caps. Fits Harley Fat Bob and Lowrider tanks.
One vented, one not vented.
011367 Set (vented & not vented)
CHROME PLATED VENTED GAS
CAP WITH LONG SKIRT
The extra long skirt on this gas cap
completely covers the filler neck of your gas
tank, providing a clean Custom look. Fits
single or vented side of all OEM type gas
tanks with cam lock gas cap as well as many
Custom gas tanks.
011438 Chrome extra long skirted gas
cap
SATELITE GAS CAP COVER
Chrome plated die-cast gas cap cover fits
1977 thru 1983 gas caps, except screw-on
type gas caps.
011157 Satelite gas cap cover
10300002_ZOD_H19_UK_039
8-9-2010
10:23
Pagina 039
Gas Gaps & Covers
CHROME CAM LOCK STYLE GAS
CAPS
Stock replacement cam lock style gas caps
as used from 1936 thru 1982, also fit most
Custom and aftermarket tanks with cam
style bungs. Vented caps are used on single
cap gas tanks, and the right side on dual cap
gas tanks. Non-vented caps are used on the
left side of dual cap tanks.
Fits 1936 thru early 1973 Big
Twin, and 1957 thru early
1973 KH and Sportster
011990 Vented (OEM 61103-36)
011991 Non vented (OEM 61103-65)
GAS CAP COVER
Die-cast and beautifully chrome plated.
Available in three sizes. Small ones fit Harley
gas caps up to 1976. Our universal gas caps
and many original gas caps as used on
various makes and models. Large ones fit
Harley 1977 thru 1983. Extra Large fits
Harley screw-on gas caps 1982 to present.
011154 Krommet cover Small
011155 Krommet cover Large
011161 Krommet cover Extra Large
CHROME LATE STYLE SCREW-IN
GAS CAPS
Chrome finished, plastic bodied, nylon
threaded gas caps. Designed to fit the
OEM as well as all Zodiac tanks with screw
type filler neck 1982 to present.
011182 Vented, fits right side of twin
cap tanks and all single cap
tanks except FLT(C), FLHT(C)
(OEM 61102-83A)
011183 Non vented, fits left side only
(OEM 61103-83)
Fits late 1973 thru 1982 Big Twin
and Sportster, except FLT and
FXR models
011993 Vented (OEM 61102-73A)
011994 Non vented
GAS CAP GASKET
Available in both thin and thick.Thin one fits
all U/UL/E/EL/ and FL/FLH gas caps
1937 thru 1976, thick gasket fits all camlock
gas caps 1977 to present. Sold in 10 packs.
234483 Gas cap gasket thin
(OEM 61114-48)
234482 Gas cap gasket thick
(OEM 61111-77)
LIVE TO RIDE GAS CAP COVER
Self-adhesive, chrome plated gas cap cover
with Eagle-Spirit logo. Fits late style ScrewIn gas caps (except molded plastic).
301729 Eagle Spirit gas cap cover
adhesive
LATE STYLE CHROMED STEEL
THREADED GAS CAPS
These beautifully chrome plated late-style
steel gas caps are perfect reproductions of
the original equipment part. These caps
come with the latest low-pressure relief vent
properly recessed in the cap to clear the filler
neck vent tube on 1985 to present gastanks.
011546 Right side cap, vented
(OEM 61102-83A), also fits
single cap models, except
FLT(C) & FLHT (C)
011547 Left side cap, non vented
(OEM 61103-83)
19
GAS CAP GASKETS
Thick gas cap O-ring gasket for screw on
type gas cap as used on most models
1982 to present (OEM 61109-85).
231147 Gas cap gasket, thick
19-039
10300002_ZOD_H19_UK_040
8-9-2010
10:24
Pagina 040
Gas Gaps
"ROLAND SANDS DESIGN"
LOGO, BILLET ALUMINUM GAS
CAPS
Left side screw-in vented gas cap that
features the RSD logo on top. Available in
chrome plated or black anodized CNC
machined billet aluminum. The black
anodized version sports the RSD logo in
contrast-cut.
740624 Chrome
740625 Black anodized
LOCKABLE SCREW-IN GAS CAPS
Lockable gas caps with ribbed sides and
show quality chrome finish.The lock system
prevents for the gas caps coming loose with
the engine running. Fits all 1982 to present
fuel tanks with Screw-In style caps. The
vented version fits on models with a single
gas cap, as well as on the right side on
models with dual gas caps. The non-vented
version fits on the left side of models with
dual gas caps. Vented and non-vented caps
are sold in sets as well as individually.
011922 Set of left and right caps
011920 Vented lockable gas cap only
011921 Non-vented lockable gas cap
only
SPINNER GAS CAPS FOR SCREWIN STYLE GAS TANKS
These chrome plated spinner gas caps fit all
screw-in style gas tanks with single-bung, or
on the right side of tanks with dual screwin style bungs.
012008 Chrome spinner gas cap
19
CHROME POINTED SCREW-IN
GASCAP
Chrome finished pointed gas caps. Fits
1982 to present fuel tanks with screw type
filler neck.Available as a set of a vented and
a non-vented cap for use on Big Twin
models, or as a vented cap only for use on
Sportster and other models with a single gas
cap.
022071 Chrome pointed gas cap,
vented
022072 Chrome pointed gas cap set
19-040
"EAGLE SPIRIT" GAS CAPS
These screw style gas caps will fit 1982 to
present tanks. Available as set or separate
(vented or non vented) in Chrome finish.
Vented gas cap will also fit single cap tanks
(except FLH/FLHT/FLHS).
011432 Gas cap set, chrome finish
011433 Gas cap vented, chrome finish
011434 Gas cap non vented, chrome
finish
CHROME BILLET "ESSENTIAL"
GAS CAPS
These gas caps have a unique ratchet action
to prevent over tightening and come
complete with a paint protector and locking
tool with key ring.The right hand side cap is
fitted with an EPA check valve, which can be
removed for service or other applications.
Made from solid billet aluminum with a
show chrome finish. "Essential" gas caps fit
all models with screw-in style gas caps
1982 to present, as well as all Zodiac gas
tanks with screw type filler neck.
012026 Gas cap set with left and right
side caps, paint protectors and
locking tool
012028 Gas cap set with right side cap,
and left side dummy cap to
replace stock left side fuel
gauge assembly, paint
protectors and locking tool
012027 Left side dummy gas cap to
replace stock left side fuel
gauge assembly, paint protector
and locking tool
012029 Right side gas cap with paint
protector and locking tool,
vented
012030 Left side gas cap with paint
protector and locking tool, nonvented
10300002_ZOD_H19_UK_041
8-9-2010
10:25
Pagina 041
Gas Gaps
CHROME BILLET POINTED OR
DOMED "ESSENTIAL" GAS CAPS
These gas caps have a unique ratchet action
to prevent over tightening and come
complete with a paint protector and locking
tool with key ring.The right hand side cap is
fitted with an EPA check valve, which can be
removed for service or other applications.
Made from solid billet aluminum with a
show chrome finish. "Essential" gas caps fit
all models with screw-in style gas caps
1982 to present, as well as all Zodiac gas
tanks with screw type filler neck. Available
as sets of left and right, as well as single gas
caps for use on single-cap gas tanks, such as
used on Sportster models. Pointed or Domed
style.
012156 Pointed gas cap set with left
and right side caps, paint
protectors and locking tool
012155 Pointed gas cap with paint
protector and locking tool,
vented
012158 Domed gas cap set with left
and right side caps, paint
protectors and locking tool
012157 Domed gas cap with paint
protector and locking tool,
vented
IGNITION SWITCH AND
LOCKABLE SCREW-IN GAS CAP
KITS
Handy kits with an ignition switch and
lockable gas caps reduce the number of keys
on your ring as one key fits both the gas
caps, as well as the ignition switch. The
lockable gas caps with ribbed sides and
show quality chrome finish.The lock system
prevents for the gas caps coming loose with
the engine running. Fits all 1982 to present
models dual Screw-In style caps, except
those with a fuel level gauge. Available in
your choice of mechanical or electronic
ignition switch.
011924 With 6 post mechanical ignition
switch
011923 With 6 post electronic ignition
switch
LOCKABLE QUICK CAM FLUSH
MOUNT GAS CAPS
Replacement lockable Quick Cam flush
mount gas caps. Available as a set with one
vented and one non-vented cap for tanks
with dual Quick Cam gas caps, or vented cap
for tanks with single Quick Cam gas cap.
011549 Lockable gas cap set
011551 Vented Quick Cam gas cap
DELUXE “CLASSIC STYLE”
LOCKABLE GAS CAPS
These “Classic Style” lockable gas caps
feature ribbed sides and a special lock-cover
for that special look. The lock cover will
prevent any water or moisture to enter the
tank through the key-hole. The SuperChrome surface makes these gas caps real
eye-catchers. They will not vibrate or spin
loose with the engine running.The dual gas
cap sets use the same key for both the
vented and the non vented gas cap. Their
superb quality is securely tested and stated
by a TÜV approval.
237377 Set of left and right caps for Fat
Bob style tanks
237378 Single vented capc
ANODIZED EXTRA SMALL MINI
“QUICK ACTION” FILLER CAPS
These popular extra small mini “Quick
Action” filler caps are available with the
inner part anodized in five popular colors.
You can choose the color that matches up
with the color of your bike. Anodized mini
caps come without lock.
237430 Silver
237431 Black
237432 Purple
237433 Red
237434 Blue
19
Replacement parts
237687 Replacement fixing screws
(6 pack)
237690 Replacement rubber gasket,
6 hole
237683 Replacement flange, 6 hole
237686 Replacement neck
19-041
10300002_ZOD_H19_UK_042
8-9-2010
10:27
Pagina 042
Gas Gaps
CRIME SCENE CHOPPERS' SPEEDSTER GAS CAPS
The Speedster gas cap is a slick, flip-open vented cap that
complements the post war Bobber styling.The Speedster cap is Crime
Scene Choppers' modern take on vintage Indy race car hardware.
You've seen it on signature bikes built by Chica, Paul Yaffe and Cyril
Huze. The cap bolts to a weld-in boss that you can add to any tank.
The cap has an 80 mm outer diameter and is available with stainless
or brass hardware. Weld-in bungs are available separately in both
steel and aluminum.
743308 Speedster gas cap, satin finish with brass hardware
“MIDI QUICK ACTION” ALUMINUM RACING GAS CAPS
A smaller version of the popular “Quick Action racing gas caps. The
smaller diameter makes it easier to install them on split gas tanks.
Like the larger caps these are also available with or without lock.
Lockable caps are also available with vent hole. Non vented caps can
only be used on tanks with external vent hole.
A. 237353 Gas cap, non vented
B. 237354 Lockable gas cap, non vented
C. 237359 Lockable gas cap, vented
Replacement parts
237688
Replacement fixing screws, 6 pack
237689
Replacement composite gasket, 6 hole
237691
Replacement rubber gasket, 6 hole
237684
Replacement flange, 6 hole
237685
Replacement neck
19
743309 Speedster gas cap, satin finish with stainless hardware
EXTRA LARGE AERO STYLE ALUMINUM RACING GAS
CAPS
Associated with the Racing Industry, these Aero-style caps gained
popularity under the Custom Bike Builders. These 500-series Aero
style gas caps are non vented, available with or without lock and are
140 mm outer and 75 mm inner diameter. Come complete with
required mounting hardware.
232130 Aero cap with lock, non vented
232136 Aero cap without lock, non vented
743310 Steel weld-in bung for Speedster gas cap
743311 Aluminum weld-in bung for Speedster gas cap
743312 Replacement gasket and o-ring kit
19-042
10300002_ZOD_H19_UK_043
8-9-2010
10:28
Pagina 043
Gas Gaps
“QUICK ACTION” ALUMINUM RACING GAS CAPS
These racing type caps are widely used for racing applications but are
getting more and more popular with Custom Bike builders. This all
aluminum alloy Shaw Flush fitting cap assembly is available with or
without lock and has a 2” opening to allow easy filling. The lockable
caps are also available with vent. Non vented models can only be used
if a separate vent is available on the tank.
A. 232153 Quick Action gas cap, non vented
B. 232154 Quick Action gas cap with lock, non vented
C. 237348 Quick Action gas cap with lock, vented
Replacement parts
237647 Replacement fixing screws, 8 pack
237692 Replacement composite gasket,
237693 Replacement rubber gasket, 8 hole
237694 Replacement flange, 8 hole
237695 Replacement neck
CHROME PLATED AERO-STYLE ALUMINUM GAS
CAPS
Flush mount chrome plated aluminum racing style gas caps. Can be
used as replacement on all steel Zodiac tanks with Aero-style gas
cap. Can also be used on other Custom tanks with Aero-style gas
caps, Available with 95 mm and 120 mm outside diameter and in
vented and non vented.
A. Aero Gas caps with 95 mm outer diameter
011528 Gas cap set vented and non vented
011526 Gas cap vented
011527 Gas cap non vented
CHROME PLATED FLUSH MOUNT GAS CAPS
Chrome plated gas cap, can be used as stock replacement for 1982 to
present models with screw in type gas caps. Vented and non-vented
caps are sold in sets as well as individually. For customizers we offer
a vented weld in cap, which comes complete with a steel bung. To
refill your tank you have to open the cap with a special tool supplied
with the kit. We even managed to give this tool a little CNC machine
treatment so now you can open your beer bottle too!
012031 Gas cap with weld-in bung
012032 Vented gas cap
012033 Non-vented cap
012034 Set with a vented and a non-vented cap
STROKER STYLE
FLUSH MOUNT GAS
CAPS
These slick lookin' Flush
Mount gas caps have that
sought-after appearance of
Aero-style gas caps. They fit
all models 1982 to present
and have a perfect show
chrome finish. Easy to install,
just screw the built-in trim
ring straight into your tank.
The Allen head screws are
real but not used to secure the trim ring.The no-key filler plugs feature
a ratchet mechanism to avoid that you tight them so good that it will
be a pain to open them again. Order a vented version for models with
a single gas cap or a vented and a non-vented version for models
with dual gas caps. A dummy gas cap to replace the fuel gauge as
mounted on many models in the left gas tank is also available.
012056 Non-vented, right hand thread
012057 Vented, right hand thread
012058 Non-vented, left hand threat
012061 Matching dummy cap
19
B. Aero Gas caps with 120 mm outer diameter
011525 Replacement Aero gas cap large
FOR ARLEN NESS GAS CAPS & COVERS SEE SECTION 25
19-043
10300002_ZOD_H19_UK_044
8-9-2010
10:29
Pagina 044
Gas Caps
CHOPS 76 GAS CAPS
Chops 76 offers a complete exclusive range of so-called "Old School"
motorcycle products, including these gas caps. A perfect example of
Italian design. Produced on state of the art machinery from high
quality materials, your guarantee for products that meet the highest
quality standards.We offer four lines of Chops 76 gas caps in chrome
or black anodized aluminum or polished-to-perfection pure brass.
Gas caps fit 1982 to present screw-in style fuel tanks.
POP-UP" CUSTOM GAS CAPS
These “Pop-Up” gas caps allow you to give your gas tank that real
Custom Smooth Top look, as seen by the worlds leading Custom Bike
Builders. They are easy to open or close, just push in the cap, twist
and the cap will pop up and is ready to unscrew. No matter if you have
a steel or aluminum gas tank, Zodiac has these Custom goodies with
your choice of aluminum or steel weld-in bung. Caps are vented and
available in aluminum with a top-quality show chrome finish or
natural aluminum to apply the finish of your choice. Bungs have a
2 5/16” (59 mm) outer diameter, caps are 55 mm in diameter.
011900 Natural aluminum cap with weld-in steel bung
011901 Natural aluminum cap with weld-in aluminum bung
012100 Natural aluminum cap without bung
011902 Chrome plated aluminum cap with weld-in steel bung
011903 Chrome plated aluminum cap with weld-in aluminum
bung
012101 Chrome plated without bung
Arrow Line
743350 Chrome, vented
743351 Black anodized, vented
19
King Line
743352 Chrome, vented
743353 Black anodized, vented
743354 Brass, vented
“POP-UP” STOCK REPLACEMENT GAS CAPS
Now you can have that real Smooth Top look, as seen by the worlds
leading Custom Bike Builders without changing your gas tank.These
“Pop-Up” gas caps come complete with threaded inserts that replace
the stock gas cap and allow for the use of these chrome plated PopUp’s. Just remove your stock gas caps and install the inserts in
seconds! “Pop-up” gas caps are easy to open or close, just push and
twist the cap and the cap will pop up and is ready to unscrew. Fits all
screw cap type stock OEM and most aftermarket gas tanks. Caps are
available in vented and non-vented and are sold each.
011904 Vented pop-up gas cap, chrome
011905 Non-vented pop-up gas cap, chrome
19-044
10300002_ZOD_H19_UK_045
8-9-2010
10:30
Pagina 045
Gas Caps & Covers
Tower Line
743355 Chrome, vented
743356 Black anodized, vented
“MAGNUM .38 POLICE SPECIAL” STYLE BILLET
ALUMINUM GAS CAP COVERS BY RBS
Something really special are these .38” Police Special Style” gas cap
covers, decorated with genuine cartridge cases. Caps are machined
from a block of solid aluminum and install easily over your stock gas
caps.They are secured with almost non visible Allen head set screws.
You can have these covers in polished or black, but the cartridges
stay the same. For that true finishing touch there are matching
handlebar grips, risers, point covers, and SuperTrapp end caps
available.
722270 Chrome .38 Special gas cap cover
722271 Black .38 Special gas cap cover
Cone Line
743357 Chrome, vented
743358 Black anodized, vented
743359 Brass, vented
19
“MAGNUM .38 POLICE SPECIAL” BILLET ALUMINUM
FUEL GAUGE COVER BY RBS
You can’t do without this trick fuel gauge cover when you have
installed the Police Special gas cap cover. Like the gas caps, these
covers are filled with genuine cartridge cases. Cover is machined from
billet aluminum and installs easily over the stock fuel gauge trim.
Cover is secured with almost invisible Allen head set screws.Available
in black anodized. For those that want it all there are also matching
handlebar grips, risers, point covers, and SuperTrapp end caps
available.
722292 Black .38 Special fuel gauge cover
19-045
10300002_ZOD_H19_UK_046
8-9-2010
10:32
Pagina 046
Dashes
DASH PANEL EXTENSION
Chrome plated cast aluminum dash panel
extension that fills the gap between your
dash and seat. Fits 1983 thru 1986 FXWG
models and 1984 thru 1999 Softail models,
as well as most models with aftermarket Fat
Bob style flat side tank.
301957 Chrome aluminum tank panel
PRO-ONE
BILLET
ALUMINUM
DASH
PANELS
Tired of running
around with the
same dash panel
as everyone else?
Leave the crowd
in the weeds with Pro-One’s chrome plated
Billet Dash Panels. Each and every part is
made in the USA with the meticulous
attention to detail that has made Pro-One
the leader in Billet Aluminum accessories
and has earned them the reputation, “The
Billet Aluminum People”.
Fits FL models 1968 thru 1984, FX
1971 thru 1972, FXWG 1980 thru
1985, FLST 1985 thru 1995, and
FXST 1984 thru 1995
237744 Dash, Ball Milled
Fits 1993 to present Dyna
Models, and 1996 to present
Softail models
237745 Dash, Ball Milled
BILLET DASH PANEL FOR ROAD
KING
This black beauty is CNC machined from
solid billet aluminum and than black
anodized. After this the grooves have been
re-machined to give a nice highlighted
accent. Dash panel takes the stock Speedo,
warning light cluster and ignition switch.
Comes complete with chrome mounting
screws. Fits 2004 thru 2007 FLHR Road King
models.
301511 Black billet Road King dash
panel
19
CHROME DASH PANEL
EXTENSION FOR TWIN CAM
SOFTAIL
Add a custom touch to your fuel tank with
this chrome plated cover that extends the
stock chrome dash panel to the full length
of the fuel tank. Fits all Softail models
2000 to present, except Deuce, Rocker,
FLSTSB Cross Bones, Screamin' Eagle
models and 2009 to present FLSTC.
301964 Dash panel extension
(OEM 71283-01)
19-046
DASH PANEL FOR FAT-BOB GAS
TANKS
Show-chromed and perfectly formed dash
panel. Fits all FL and Wide Glide models up
to 1984. Covers the gap between the Fat
Bob tanks.
301148 Dash panel plain
358073 Mounting rubber with clips
(10 pack)
DASH PANEL FOR FAT BOB STYLE
GAS TANKS
This show chromed dash panel will enhance
the smooth looks of your Fat Bob style gas
tank. Comes complete with black side trim.
Fits late FX and Low Rider models 1977 thru
1984, as well as most aftermarket Fat Bob
style tanks.
301051 Fat Bob dash panel
FOR ARLEN NESS GAS CAPS &
COVERS SEE SECTION 25
10300002_ZOD_H19_UK_047
8-9-2010
10:33
Pagina 047
Dashes
DASH PANEL FOR FAT-BOB GAS
TANKS WITHOUT DASH HOLE
Show-chromed dash panel for use when
instrument housings are not mounted on
tanks. Fits late models FX and Low Rider
1977 thru 1984.
301054 Dash panel plain
CHROME
DASH PANEL
FOR FXR
MODELS
Beautiful chrome
plated dash cover
that fits 1984 thru
1994 FXR/FXRS
models.
301096
Tank panel chrome
LOUVERED
CHROME
DASH PLATE
This louvered dash
panel is an addition
to our line of
louvered products
such as louvered
side panels, belt
guards
etc.
Features a stamped
steel construction with beautifully chromeplating and comes with complete hardware.
Fits all Softail models and 4 Speed FXWG
models 1983 to present.
301860 Louvered chrome dash plate
CAT-EYE DASH FOR FAT BOB
TANKS
Beautifully show-chromed dash with two
lights. This dash is a perfect reproduction of
Harley’s early style Cat-eye dash. Fits 3.5 and
5 gallon Fat Bob tanks.
013064 Cat-eye dash
358022 Trim rubber only
CAT-EYE DASH MOUNTING PLATE
FOR EARLY FAT BOB TANKS
Base plate with hardware and wiring.
Mounts
Zodiac’s
Cat-eye
dash
(ZPN 013064) to early (1936 thru 1946) FatBob tanks.
013066 Base Cat Eye dash
THREE-LIGHT DASH MOUNTING
PLATE
Includes a complete set of mounting
hardware, wiring and sockets. Mounts our
three-light dash to Fat Bob tanks
(OEM 70934-59).
013068 Dash base
THREE-LIGHT DASH FOR FAT BOB
TANKS
Chrome plated steel dash with three lights.
Fits 3.5 and 5 gallon Fat Bob tanks.Available
for the large diameter cable driven FL style
speedo’s as well as the smaller diameter
electronic driven speedo’s as used on most
models from 1995 to present. Replacement
lenses and trim rubber are separately
available.
013062 Three-light dash for cable
driven speedo
011658 Three-light dash for electronic
driven speedo
358022 Trim rubber only
165124 Red lens only
165122 Blue lens only
19
CAT-EYE DASH MOUNTING PLATE
Includes all mounting hardware, wiring and
sockets. Mounts our Cateye dash to Fat-Bob
gas tanks.
013070 Base for Cat Eye dash
19-047
10300002_ZOD_H19_UK_048
8-9-2010
10:35
Pagina 048
Dashes
TWO-LIGHT DASH MOUNTING
PLATE
Includes mounting hard-ware, wiring and
sockets. Mounts two-light dash to Fat-Bob
tanks (OEM 70938-49).
013072 Base plate for 2 light dash
TWO-LIGHT DASH WITH BASE
PLATE FOR FAT BOB TANKS
Show-chromed two-light dash with base
plate. Fits 3.5 and 5 gallon Fat Bob tanks.
013052 Two-light dash kit
358022 Trim rubber only
013055 Red lens only
CHROME DASH FOR FXR MODELS
Chrome plated replacement dash to fit most
FXR models 1982 thru 1994
(OEM 61411-82, 61412-82 and 61414-82).
301422 Dash cover
REPLACEMENT SOCKET FOR
STEEL DASH
Replacement socket only.
163018 Replacement socket only
(OEM 71157-99)
LATE STYLE CAST DASHES
These heavy-duty zinc die-cast dashes are
beautifully chrome plated duplicates of their
OEM counterparts. Complete in every detail,
each dash also includes the lenses, light
divider and trim rubbers. They may be
installed on most 4 Speed frames and Softail
models when the appropriate dash base is
used.
301698 Fits all models from 1968
301886 Fits all models with selfcanceling turn signals (except
Dyna Wide Glide) from 1991 to
present (OEM 71241-91)
Replacement parts
358200 Trim rubbers (pair)
(OEM 71295-68)
19
CHROME PLATED DASH COVER
FOR 2000 TO PRESENT SOFTAILS
Die-cast dash cover with show chrome
finish, reproduction of the OEM dash as
found on all 2000 to present Softail models,
except the fuel injected FXSTDi Deuce
(OEM 71250-00).
301629 Chrome dash 2000-up Softail
19-048
LATE STYLE DASH MOUNTING
PLATE
Complete dash mounting kit for Big Twin
models from 1968 thru 1995 with cast style
dashes (except FXDWG models). Kit includes
all hardware and spacers necessary to fit
both the standard early-style Fat Bob and
the later-style Flat-Side tanks.Also included
are: circuit breaker clips, ignition switch
mounting screws, three terminal studs and
five light sockets with bulbs. Fits Zodiac dash
cover (ZPN 301698) or OEM cast dash.
013082 Dash base kit for cast dashes
HIGH BEAM INDICATOR LIGHT
Original style, multi-piece high beam
indicator lamp assembly with replaceable
bulb. Fits as original equipment on FX
models 1973 and 1974, as well as XL
models 1968 thru 1973. Can also be used
to replace the later one piece “throw-away”
indicator lamp on 1975 and later FX models
(OEM 67891-68).
160107 High beam indicator light
10300002_ZOD_H19_UK_049
8-9-2010
10:36
Pagina 049
Dashes & Dash Accessoires
CHROME DASH FOR FX MODELS
Fits all FX models with tank mounted
instruments from 1977 thru 1984.Available
in a chrome plated stamped steel version
and a Heavy-Duty die-cast. Die-cast version
has the same thickness and construction as
the original equipment part.
301250 Die-cast dash cover only
(OEM 71301-77) (trim rubber
and mounting hardware are
separately available)
301679 Stamped steel dash, includes
trim rubber and warning light
hole plugs for Custom
applications when High-beam
indicator/trip reset knob is not
installed (OEM 71301-77T)
358023 Trim rubber FX dash
CHROME PLUGS FOR FX STYLE
DASH
Chrome plated hole plugs to blank off the
holes on FX style dashes when High-Beam
indicator light and/or trip reset knob are not
installed.
301465 Fits High-beam indicator light
hole (10 pack)
301467 Fits trip reset knob hole
(10 pack)
PAUL YAFFE'S BAGGER NATION
DASH COVERS
Like your Dresser? Wish it had a little more
style and a little less bulk? Paul Yaffe felt the
same way. So he fabbed up these sleek
dashes to alter the looks of any FLH or FLT
model. These fiberglass dashes are a direct
replacement for your stock dash and can be
cut to length as it has been made extra long
to fit even on the longest stretch tank.
Dashes are hand laid and come with a
rubber trim, hardware and instructions.
Those for 2008 and later models also include
a really trick chrome billet pop-up gas cap.
745028 Fits carbureted Touring models
1986 thru 2007
745027 Fits Fuel Injected Touring
models 1995 thru 2007
745026 Fits Touring models 2008 to
present
REPLACEMENT LENSES FOR FAT
BOB DASHES
Our replacement lenses can be used to
restore original equipment or as
replacement for Zodiac dashes. Lenses are
sold each.
165124 Lens for 3-light dash red
165122 Lens for 3-light dash blue
013055 Lens for 2-light dash red, GENOIL
19
DASH CENTER MOUNTING BOLT
FOR HARLEY
Will mount all FL dashes 1941 thru 1967 but
can also be used on Custom applications
where choke is not brought through dash
(OEM 71067-47).
339006 Dash mounting bolt
19-049
10300002_ZOD_H19_UK_050
8-9-2010
10:38
Pagina 050
Dash Accessoires
DASH LENS AND SUPPORT KIT
FOR FAT BOB DASHES
This is the most complete dash kit available,
fits FL models 1968 thru 1984, FX models
1971 thru 1972, FXWG models 1980 thru
1986 and Softail models 1984 thru 1995. Kit
includes indicator lenses (neutral, hi-beam
and oil), lens support and retainer, mounting
clips and screws (OEM 71143-75, 7114475A, 71145-75, 71141-68, 71164-68,
71297-68 and 2630W).
301710 Lens & support kit
19
DASH/SPEEDO MOUNTING KIT
Complete mounting kit, to mount FX tank
mounted dash and gauges on pre1985 3.5 or 5 gallon Fat Bob tanks. Exact
reproduction of stock pieces. Includes
speedo and tacho cup brackets, hardware
and correct rubber mounts.
011215 Dash/Speedo mounting kit
DAKOTA ADJUSTMENT UNIT FOR
ELECTRONIC SPEEDOMETERS
Dakota’s electronic speedometer adjustment
unit plugs directly into the stock sockets of
1996 to present models with the electronic
driven speedometer. This unit allows you to
correct the speedometer and odometer
reading after a change in tire or pulley size
or when a different transmission (different
ratio or 6 Speed) has been fitted. No cutting
or splicing of the stock wiring harness is
required, just plug it in the 3-pin connector
plug between the transmission sensor and
the speedometer. Two sealed push-button
switches allow the speedometer reading to
be increased or decreased easily while the
bike is being driven. After you have set the
speedometer to the correct reading, the unit
stores the correction factor, even with the
battery disconnected. The module is
completely sealed from water, dust, and dirt.
The correction range is from 50% to 200%
of the original reading. Small steps allow
precise correction to within 1 MPH or 1 KPH.
236986 Electronic Speedometer
adjustment unit
CHROME DASH SLOT SIDE TRIM
This part covers the slotted opening beneath
the odometer reset knob on all 1947 thru
1967 two light and three light dashes of all
original equipment and aftermarket dashes.
301759 Dash slot trim (OEM 71311-47)
19-050
DASH SCREW KIT
Chrome plated allen screws to mount the
dash on 1977 thru 1985 FX models, and
1986 thru 1994 FXR models.
741839 Dash screw kit, fits 1977 thru
1985 FX models
741840 Dash screw kit, fits 1986 thru
1994 FXR models, except 1988up FXRS
ELECTRONIC SPEEDOMETER
CALIBRATOR
This S&S Electronic Speedometer Calibrator
allows the rider to correct the electronic
driven speedometer as found on most Big
Twin and Sportster models from 1996 to
present. The unit is very easy to install by
unplugging the connector between the
transmission sensor and speedometer and
plugging these two connectors into the S&S
unit. The calibrator can be used to correct
the difference between actual and indicated
speeds and mileage in 1% increments
between -29% and +69%, a must when you
have fitted a different-than-stock rear tire
size, transmission sprockets, 6 Speed
transmission, or belt drive pulleys. Unit is
only 2 1/4” x 1 1/2” x 1 1/8” to permit a
neat installation and is completely sealed
for protection from weather and vibration.
236690 S&S Electronic Speedometer
Calibrator
10300002_ZOD_H19_UK_051
8-9-2010
14:04
Pagina 051
Speedos
Fits 1947 thru 2003 models with either cable or
electronic drive
744263
Display with blue digits
744264
Display with red digits
Fits 2004 to present models with electronic drive
Has all the same features as mentioned above, but also has
• ABS indicator
• Cruise Control engaged indicator
• Security Indicator for 2004 thru 2006 models
• Fully compatible with stock SAE J1850 data bus
744265
Display with blue digits
744266
Display with red digits
Optional accessories
236383 Transmission or wheel driven cable to Dakota Digital
adapter
236385 Inductive pick up sender
731475 Oil pressure sensor
731478 Oil temperature sensor
DAKOTA DIGITAL INFORMATION CENTER
O.K., it is a speedo, but with so many functions that we prefer to call
it an Information Center. These Information Centers are designed to
fit all single gauge tank mount applications.
• 255 MPH/ km/h selectable speedometer
• Wrap around adjustable tachometer with
adjustable shift point,
can also display in digital numeric readout
• Odometer with two resettable trip odometers
• User settable countdown Miles to Service with warning and hour
meter
• Clock (12 hour format)
• Voltage readout with low voltage alert
• Oil Pressure (requires installation of an optional pressure sender)
• Oil Temperature (requires installation of an optional temperature
sender)
• 7 Speed Gear Position Indicator compatible with 3-7 speed
transmissions
• Speed Calibration option for those who have changed rear pulley,
front sprocket, stock transmission, or stock tires
• Various indicators can also be displayed such as Turn Signal, High
Beam, Neutral, Low Oil Pressure, and Low Voltage
• Automatic turn signal canceling compatible
• "Wait to start" / Check Engine light
• Several performance calculations include: 0- 60 time, high speed
& high RPM recall, 1/4 mile time and speed
• Chrome front bezel with non-glare scratch resistant lens
• Machined aluminum housing
• also available in a fully compatible version for 2004 to present
models, designed to work with the stock SAE J1850 data bus.
• Case diameter measures 4 1/4", bezel diameter of 4 5/8"
19
19-051
10300002_ZOD_H19_UK_052
14-10-2010
16:43
Pagina 052
Speedos
MPH/KPH SPEEDOMETER FOR
1996 THRU 1998 SOFTAILS
This original equipment electronic
speedometer features a scale that gives you
your speed in both miles and kilometers per
hour. Can be used on all
models with the transmission mount
electronic speed sensor.
237914 Electronic MPH/KPH
speedometer
MPH SPEEDOMETER FOR 1996
THRU 1998 SOFTAILS
This original equipment electronic
speedometer can be used on all models with
the transmission mount electronic speed
sensor.
237922 Electronic MPH speedometer
19
SPEEDOMETER MOUNTING KIT
Fits all models with cast dashes from
1968 to present. Kit includes a rubber gasket
(OEM 67067-76), two mounting pins
(OEM 67066-76), two pin clips
(OEM 67069-76), and two grommets
(OEM 67070-76).
169064 Speedo to dash mount kit
19-052
STOCK STYLE ELECTRONIC
SPEEDO FOR 1996 THRU 1998
SOFTAIL
Electronic controlled black faced KM/H
speedo with digital odometer for use on
1996 thru 1998 Softail models that are
equipped with the transmission fitted
electronic speed sensor pick up. Meter is
4 1/2" (11.5 cm) in diameter and fits stock
dash and stock 12-pin wiring harness plug.
169081 Electronic KM/H speedo
(OEM 67197-99A)
CABLE DRIVEN ELECTRONIC
SPEEDO FOR 1947 TO PRESENT
DASH
Cable driven electronic controlled black
faced speedo with digital odometer and
2 trip meters. Comes pre-wired with a push
button switch to select trip 1, trip 2 or
odometer and is programmable for use with
any ratio speedo drive. Installation
instructions and an adapter nut for use with
either 5/8" or 16 mm speedo cable nut.
Meter is 4 1/4" (108 mm) in diameter and
a 4 3/4" (120 mm) top ring. Fits most Fat
Bob style dashes 1957 thru 1995.Available
with 120 MPH or 220 KM/H scales.
169353 KM/H scale
169352 MPH scale
CABLE DRIVEN ELECTRONIC
SPEEDO/TACHO FOR 1947 TO
PRESENT DASH
Cable driven electronic controlled black
faced speedo with digital odometer, 2 trip
meters and tacho. Comes pre-wired with a
push button switch to select trip 1, trip 2 or
odometer and is programmable for use with
any ratio speedo drive. Installation
instructions and an adapter nut for use with
either 5/8" or 16 mm speedo cable nut.The
tacho works with both Dual and Single Fire
ignitions. Speedo/tacho meter combo is
4 1/4" (108 mm) in diameter and a 4 3/4"
(120 mm) top ring. Fits most Fat Bob style
dashes 1947 thru 1995. Available with
120 MPH or 220 KM/H scales, tacho goes
up to 8,000 RPM.
169351 Speedo/Tacho combo with
KM/H scale
169350 Speedo/Tacho combo with MPH
scale
RUBBER SPEEDOMETER
DAMPENER
This simply to install die-cut rubber
dampener fits FL style speedometers when
used with cast dash on many Big Twin
models from 1968 to present. It helps
absorb harmful vibration, making units
easier to read and last longer
(OEM 67115-91) (sold each).
169192 Rubber Speedo dampener
10300002_ZOD_H19_UK_053
8-9-2010
14:06
Pagina 053
Speedos
SPEEDOMETERS
Zodiac offers a complete line of precision
built speedometers. All speedometers
feature resetable trip mileage indicator,
speedo to dash gasket and quality glass lens.
These within OEM calibration quality built
instruments are offered in 1:1 and 2:1 ratio
with kilometers per hour or miles per hour
scale.The 2:1 ratio works with all FL models
1947 thru 1967 as well as FL models 19811984 with front wheel driven speedometers
and FX, FXR and Sportster models with front
wheel drive speedo unit.The 1:1 ratio works
with FL-FX-FXWG models 1968 to present
with transmission drive speedo unit.
WHITE FACE 1936-1940 STYLE
169084 2:1 ratio MPH 5/8” nut
169026 1:1 ratio MPH 5/8” nut
169092 2:1 ratio KPH 5/8” nut
BLACK FACE 1968 THRU 1984
STYLE
169091 2:1 ratio KPH 5/8” nut
169010 1:1 ratio KPH 5/8” nut
169094 2:1 ratio KPH 16 mm nut
POLICE SPECIAL SPEEDOMETERS
These large diameter speedo’s fit the stock
FL style dash as well as our Cat-Eye dash
and two and three light dash. Police Special
speedo’s are available with 1:1, 2:1 and
2.21:1 ratio. Speedo’s come complete with
light socket, bulb and gasket.
SPEEDO/TACHO FOR FAT BOB
DASHES
A totally improved speedo and tacho meter
combination which fits all large Fat Bob
dashes from 1947 to present.The precisionbuilt speedometer is combined with a solid
state 6000 RPM electronic tacho meter that
accurately tracks engine speed by reading
the coil output. The 1:1 ratio speedo meter
works with FL-FX-FXWG models 1968 up
with transmission drive speedo unit. The
2:1 ratio speedometer is used for
transmission drive units on 1947 thru
1967 models, as well as late model front
wheel drive applications. When installed in
conjunction with front wheel drive units, one
of our Custom speedo cables must be used
(ZPN 114152, 114246). Available in Miles
per Hour as well as Kilometers per Hour.
169165 Speedo/Tacho combo 2:1 MPH
169188 Speedo/Tacho combo 1:1 KM/H
169189 Speedo/Tacho combo 2:1 KM/H
1:1 Ratio, fits all transmission driven
FL, FX, FXWG models 1968 thru 1984.
Has 5/8” cable connector thread.
169197 Police Special speedo MPH
19
2:1 Ratio, fits all transmission driven
FL models 1947 thru 1967 as well as
1980 thru 1984 models with front
wheel drive and Sportster, FX and FXR
models 1973 thru 1990 with front
wheel drive units. Has 5/8” cable
connector thread.
169198 Police Special speedo MPH
BLACK FACE 1946 THRU 1947
STYLE
169086
169093
169025
169027
2:1 ratio MPH 5/8” nut
2:1 ratio KPH 5/8” nut
1:1 ratio MPH 5/8” nut
2:1 ratio KPH 16 mm nut
2.21:1 Ratio, fits front wheel drive
FXWG 1984 thru 1985 and FXST/FLST
1984 thru 1990. Has 12 mm cable
connector thread.
169191 Police Special speedo MPH
SPEEDO/TACHO METER
MOUNTING GASKETS
These foam rubber mounting gaskets are
direct replacements for the original
equipment’s parts. They fit the metal-cased
instruments used on Sportster, FX and FXR
models from 1983 to present and are
available with or without a visor.
169193 With visor (OEM 67039-83)
169194 Without visor (OEM 67104-83)
19-053
10300002_ZOD_H19_UK_054
8-9-2010
14:07
Pagina 054
Speedos
SPEEDOMETERS FOR FXWG-FXSTFLST MODELS
Special 2.21:1 ratio front wheel drive
speedometers to fit 1984 thru 1986 FXWG,
1984 thru 1990 FXST, FLST models.Will also
fit 1991 and later FXST and FLST models,
but these speedos don’t have the electronic
reed switch for self-canceling turn signals.
They feature 12 mm thread and come with
a gasket. Late-style trip reset knob and
screw must be used on 1984 thru
1989 models. 1990 and later models use
stock knob. Available in three face styles.
SPEEDOMETER FOR FXWG-FXSTFLST MODELS
These front wheel drive speedo’s have a
special ratio (2.21:1) to fit FXWG 19841985 and FXST/FLST 1984 thru 1990. They
have 12 mm connector thread and come
complete with gasket. Takes late (1990 up)
style OEM or Zodiac trip reset knob and
screw.
169190 Speedo
TACHOMETER FOR FX MODELS
Stock replacement tacho-meter for FX
models 1973 thru 1982 with handlebar
mounted instruments and 1977 thru
1984 FXS models with tank mounted
instruments (except FXWG & FXST).
Waterproof construction and vibration
resistant (OEM 92042-78A).
169012 Tachometer
169200 1962 thru 1967 face
19
169201 1946 thru 1947 face
SPEEDOMETER FOR 1983 THRU
1990 FX/FXR AND SPORTSTER
Stock replacement speedo-meter for the
steel cased speedo on FX/FXR and Sportster
models from 1983 thru 1990
(OEM 67020-85A).
169037 Speedometer
FX SPEEDOMETER
Speedometer that fit all 1973 thru 1982 FX
models
with
handlebar-mounted
instruments, and 1977 thru 1984 FX models,
(except FXWG, FXST) with tank-mounted
instruments. This speedometer has a
120 MPH face to make it easier to read at a
glance, and comes complete with light
socket, dash gasket and a mounting bracket
(OEM 67020-73B).
169180 Speedometer
HANDLEBAR MOUNTED
TACHOMETER
This 6200 RPM tachometer is a direct
replacement for the Original Equipment part
fitted to Sportster models from 1985 thru
1993. However, it can be used on Big Twin
models from 1983-1999 (OEM 67111-85).
169041 Tachometer
169202 1936 thru 1940 face
19-054
10300002_ZOD_H19_UK_055
8-9-2010
14:08
Pagina 055
Speedos
METERS FOR SPORTSTER AND
FXR MODELS
Stock replacement speedometer with MPH
scale and tachometer with 8000 RPM scale
for 1974 thru 1983 Sportster and 1982 thru
1983 FXR models. Great for custom
applications.
169008 Speedometer, MPH
169009 Tachometer
CHROME SPEEDO AND TACHO
COVER SET
Full-coverage chrome speedometer and
tachometer cover set. Easily slips over the
stock instrument housing, makes use of the
existing hardware without any modification.
Is a perfect match with our chrome
instrument mounting brackets ZPN
169152 & 169158.
169154 Speedo tacho cover set, fits
FX(R) & Sportster 1984 thru
1990 with handlebar mounted
speedo/tacho (OEM 6709285/67112-83 and 6709085/67105-83)
169155 Speedo cover only, fits single
instrument FX(R) & Sportster
1984 thru 1990
BILLET ALUMINUM GAUGE
BEZELS
Manufactured from 6061-T6 aluminum,
these covers are a real upgrade for your bike.
The bezels have a black anodized finish with
silver dimples. Also available in a smooth
chromed finish, with or without dimples. Fits
2" volt meter, oil pressure, fuel and air
temperature gauges as found on 1986 to
present FLT and FLTR models as well as on
2000 to present FLHT and FLHX models.Also
fits many meters with 46 mm internal and
55 mm external diameter top rings. The
3 5/8" bezels fit 1984 thru 1999 Touring
models and 2000 to present FLHT, FLTR and
FLHX models. Also fits many meters with
84 mm internal and 93 mm external
diameter top rings. Bezels are supplied in
sets of 2. Easy to install with clear silicone
(not included).
Fits 2" volt meter, oil pressure,
fuel and air temperature gauges
as found on 1986 to present FLT
and FLTR models as well as 2000
to present FLHT and FLHX
models
A. 169506 Pair chrome smooth billet
bezels
B. 169507 Pair chrome dimpled billet
bezels
C. 169508 Pair chrome billet bezels
with black dimples
D. 169509 Pair black billet bezels with
silver dimples
Fits 3 5/8" gauges on 1984 thru
1999 Touring models and 2000 to
present FLHT, FLTR and FLHX
models
E. 169501 Pair chrome smooth billet
bezels
F. 169502 Pair chrome dimpled billet
bezels
G. 169503 Pair chrome billet bezels
with black dimples
H. 169504 Pair black billet bezels with
silver dimples
PRO CYCLE 2 5/8” TACHOMETERS
Auto Meter offer a brilliant chrome
2 5/8” tachometer for Custom street and
show motorcycles. These water resistant
tachs are built with the same technology as
Pro-Cycle’s racing products, have a
8000 RPM scale and work with all stock and
popular aftermarket 1 and 2 pulse ignitions
(single and dual fire).Available with black or
white dial and many choices of bezel and
cup.
710600 Black dial with chrome bezel
and cup
710601 White dial with chrome bezel
and cup
710602 Black dial with aluminum bezel
and black cup
710605 White dial with black bezel and
cup
PRO CYCLE CHROME 3 3/4”
TACHOMETERS
Precision 8,000 RPM tachometers with
chrome plated housings from Auto Meter,
the very same company that makes most
reliable tachometer for race bikes and cars.
Race technology, quality and beauty in one.
Pro Cycle tachometers are water resistant
and have 3 3/4 inch diameter (95 mm).They
work with all stock and popular aftermarket
single and dual fire ignitions. A mounting
bracket is separately available.The Pro Meter
tach is available with a white, black or silver
colored face.
239563 Tachometer with black face
239564 Tachometer with white face
239565 Tachometer with silver face
239571 Mounting bracket
239574 Shock strap kit for mounting
bracket
19
19-055
10300002_ZOD_H19_UK_056
8-9-2010
14:09
Pagina 056
Speedos
PRO CYCLE 5” RACING
TACHOMETER WITH SHIFT LITE
BY AUTO METER
Auto Meter claims the 5” Pro Cycle
tacho-meter is the most accurate unit
available. The scales runs to a maximum of
10,000 RPM and the unit has a built-in shift
war-ning light to prevent you from over
revving your engine.A must for every serious
Harley racer. The 5” diameter precision
gauge ensures optimal view on your
accu-rate rpm, while the clear, amber
warning light tells you when to shift for
maximum performance.The shift lite can be
set easily by a selector on the gauge. Comes
complete with mounting bracket. For those
that run single fire ignition a tach adapter for
two coils is included. Brackets for handlebar
mount as well as the shock strap and tach
adapter are separately available.
239562 Tachometer with shift lite
239571 Mounting bracket
239574 Shock strap kit for mounting
bracket
19
MINI SPEEDO/ TACHO
MOUNTING CLAMP
Mini speedo / tacho mounting clamp
complete with rubber bushing. Also usable
for Custom applications. A perfect antivibration mount bracket.
169179 Mounting clamp
19-056
PRO CYCLE RACING TACHO
METERS BY AUTO METER
Auto Meter has set the newest standard in
tacho meters for Harley riders that need
instant, accurate information about motor
RPM. These instruments feature the same
reliability and technological quality as Auto
Meter.s race proven automotive
tachometers. They are water resistant and
come with a mounting bracket. They work
with all stock and popular aftermarket single
and dual fire ignitions. These tachometers
offer accurate and visible readings and good
looks, which makes them perfect for the
serious racer, as well as for the show bike
enthusiast. The 8,000 RPM tachometer is
3 3/4” in diameter, and the 10,000 RPM
tachometer is 5” in diameter.
239560 3 3/4” Tachometer with bracket
8,000 RPM
239561 5” Tachometer with bracket
10,000 RPM
239571 Mounting bracket only
239574 Shock strap kit for mounting
bracket
MINI
SPEEDOMETER WITH
TRIP METER
An
improved
version of our
mini speedometer with the
addition of a trip meter to keep track of your
mileage since your last gas stop. Meters have
a 2 3/8” diameter with 2 5/8” rim and are
2 1/8” high. Scales are available in Miles per
hour as well as Kilometer per hour. Both have
a 2:1 ratio and fits FL models from 1947 thru
1967 with transmission driven speedometers,
FL models from 1981 thru 1984 with front
wheel drive speedo drives, all FX and FXR
models with front wheel driven speedo’s and
all Sportster and K models from 1954 thru
1995.These mini speedometers come with an
anti-vibration handlebar mounting clamp.
169003 MPH scale
169004 KPH scale
167393 Replacement bulb (10 pack)
MINI INSTRUMENTS
Speedo's and tacho's in 60 mm
diameter
2:1, fits FL 1947-1967 & 1981-1984,
FX/FXR 1973 to present, and Sportster
1954 to present.
169065 KM/H scale
169020 MPH scale
1:1, fits transmission driven FL
1968-1980, FXWG 1980-1983, FX
1971-1972, and Triumph
T120/150 1967 up.
169068 KM/H scale
169022 MPH scale
2.1:1, fits all Kawasaki, Honda,
Suzuki, Yamaha and most front
wheel driven European makes
and models.
169021 KM/H scale
169023 MPH scale
Mini Tachometers
169031 2:1, fits all Harley except models
with electronic tacho, Norton all
models except Commando
169030 4:1, fits Honda 550/750/
1000/1100, all models Suzuki &
Yamaha, Triumph
TR6/T120/T120, Norton
Commando, some BSA
Replacement bulbs
167393 Replacement bulb (10 pack)
Note: Mini speedo’s and tacho’s will NOT
replace electronic gauges.
10300002_ZOD_H19_UK_057
8-9-2010
14:10
Pagina 057
Speedos
Information Centers with
selectable MPH and KM/H
744260 DeLuxe Classic
PRO-MAX DIGITAL SPEEDO &
TACHOMETER
For the custom builder that wants more than just
the average, Pro-Max designed and developed
this unique and very complete speedometer &
tachometer combination.This digital instrument
has a built-in bar-graph tacho,digital odometer,
trip meter and display indicators for High Beam
light, Neutral gear indicator, Oil pressure and
Turn signals. Works on stock transmission
mounted electronic speed sensor as used on
1994 and later models.Alternatively, electronic
pulse generators that connect to a stock wheel
or transmission driven speedo cable are available
separately.The Pro-Max digital speedo features
program mode to adjust to your transmission,
final drive ratio and rear wheel size.All of this is
in a beautiful chromed billet aluminum housing,
measuring 4 11/32" (110 mm) long, 2 7/32"
(57 mm) high and 1 1/64" (38 mm) wide. The
handle bar mounts are available in 1"
(25.4 mm), 1 1/4" (31.75 mm) and 1 1/2"
(38.1 mm) diameter in Smooth or Tri-Groove
finish and must be ordered separately.
Digital Tacho & Speedometer
169375 MPH
169383 KM/H
Cable driven pulse generators
160798
For cables with 5/8" top
nut
160799
For cables with 12 mm top
nut
DAKOTA INFORMATION CENTERS
Dakota Information Centers are available in
4 versions Deluxe Classic, Deluxe Hooded,
Deluxe Oval, and Deluxe Spiked.All versions
feature:
• easy to calibrate speedometer in your
choice of 0-199 KPH or 0-199 MPH
• quick response bar graph tachometer with
0 - 8.000 RPM
• odometer with trip odometer
• various indicators for turn signal, high
beam, low oil pressure, neutral, wait to
start and service engine
• machined aluminum housing with chrome
front bezel and non-glare scratch resistant
lens
• Auto-cancel turn signal compatible
• oil pressure gauge (sender included)
• fuel level gauge (use stock sender)
• voltmeter
• gear position readout
• clock
• countdown service meter
• performance display for 0-60 MPH - KPH
timer, 1/4 mile time, maximum speed and
RPM recall
236393 DeLuxe Hooded
744261 DeLuxe Oval
744262 DeLuxe Spiked
The information centers are compatible with
both electronic and cable drive applications.
Cables, cable drive pulse generator,
inductive sensor, and adapter for
OEM sensor are sold separately. Information
Centers can be mounted either above or
below bars. Mounting brackets are also to be
ordered separately.
Optional sensors
236383 Transmission or wheel driven
cable to Dakota Digital adapter
236385 Inductive pick up sender
236384 Adapter for use with
OEM sensor
19
Smooth finish handle bar mounts
169376 For 1" (25.4 mm) handle bar
169377 For 1 1/4" (31.75 mm) handle
bar
169378 For 1 1/2" (38.1 mm) handle bar
Tri-groove finish handle bar
mounts
169379 For 1" (25.4 mm) handle bar
169380 For 1 1/4" (31.75 mm) handle
bar
169381 For 1 1/2" (38.1 mm) handle bar
Note: Speedo sending unit and mounting
bracket are not included
19-057
10300002_ZOD_H19_UK_058
8-9-2010
14:11
Pagina 058
Speedos
236383 Transmission or wheel driven
cable to Dakota Digital adapter
ODYSSEY FLAT OVAL DIGITAL
SPEEDOMETERS BY DAKOTA
DIGITAL
These digital instruments utilize Dakota's high
contrast teal display for easier daytime viewing.
They can be mounted directly on the handlebar in
the above or below position, or with a flat or
35degree triple-tree mount.Speedometer can be
used in KM/H or MPH mode.Can be driven by the
OEM electronic speed sensor when used in
combination with the Dakota adapter, inductive
sensor (for counting gear tooth) as well as a normal
cable when used with the unique Dakota pulse
generator.Speedo measures 41/8" (10.5cm) long,
2" (5 cm) wide and 1 3/4" (4.5 cm) high. Meter
housings and mounting hardware are high quality
chrome plated.Meters,mounts and sensors must
be separately ordered.
19
Digital Mini Speedometer
Adjustable speedometer with odometer reading.
This speedometer can be driven by the
OEM electronic speed sensor when used in
combination with the Dakota adapter,inductive
sensor (for counting gear tooth) as well as a
normal cable when used with the unique Dakota
pulse generator. Available with 0-250 MPH or
KM/H scale. Measures 4 1/8” (10.5 cm) long,
2” (5 cm) wide and 1 3/4” (4.5 cm) high.Three
great looking styles to choose from. Meters,
mounts and sensors must be separately ordered.
236388 Classic Oval digital
speedometer
236386 New Oval digital speedometer
236387 Spiked digital speedometer
19-058
236385 Inductive pick up sender
236384 Adapter for use with
OEM sensor
DAKOTA DIGITAL GEAR
INDICATOR
Dakota Digital's PGR-1000 series gear
indicators are self-programming. Simply
hook them up and ride through all of the
gears and you are done. They can be used
on any 12 Volt motorcycle with an electronic
speed signal, also known as speed sensor.
Features 1-7 gear readout, neutral indicator,
selfdimming, chromed machined 1 1/4"
(32 mm) diameter aluminum housing and
built-in mounting bracket.Available with 1",
1 1/4" and 1 1/2" handlebar mount or flush
mount for use in fairings and other panel
mount applications.
236389 For 1" (25.4 mm) handlebars
236390 For 1 1/4" (32 mm) handlebars
236391 For 1 1/2" (38 mm) handlebars
236392 Flush mount
DIGITAL INSTRUMENT PANEL
This is the latest in digital instrument panels.
This Hi-Tech box is only 2” wide and
3.35” long and provide you with all the info
you need. It provides speedometer and
tachometer functions and all the required
indicator lights in the correct colors such as
oil, neutral, right turn- and left turn signal
and high beam. This instrument utilizes
daylight readable L.E.D.’s for viewing in
direct sunlight and a daylight sensor for auto
dimming at night.
Note: Digital output from transmission
sensor and from ignition module is required,
device will not work straight off the coil.
731913 Digital speedo/tacho for bar
mount
731914 Digital speedo/tacho for panel
mount
731915 Clamp for 1” bars
731916 Clamp for 1 1/4” bars
731917 Clamp for 1 1/2” bars
ODYSSEY FLAT OVAL DIGITAL
TACHOMETER BY DAKOTA
DIGITAL
A quick response tachometer that works
with both Single and Dual fire ignitions.
Features high contrast teal display for easier
daytime viewing and can be mounted
directly on the handlebar in the above or
below position, or with a flat or 35 degree
triple-tree mount. RPM range from 0 8,000 RPM. Scale reading is accurate in
increments of 100 RPM. Measures 4 1/8"
long, 2" wide and 1 3/4" high. Mount must
be separately ordered.
731485 Oval mini tachometer
10300002_ZOD_H19_UK_059
14-10-2010
16:44
Pagina 059
Speedos
MOUNTS FOR DAKOTA DIGITAL
FLAT OVAL METERS
Mounts for flat oval speedometer,
tachometer, and information center
Handlebar mounts work in both the over as
well as the under handlebar position.
A. 731489 For 1” handlebars
B. 731490 For 1 1/4” handlebars
C. 731491 For 1 1/2” handlebars
D. 731492 Flat triple tree mount
E. 731493 35° triple tree mount
MMB'S DIGITAL LCD SPEEDO
A 2-line red or blue lighted LCD digital
speedo with button switch to switch
between 7 available functions. Such as
speed in MPH or KM/H, total distance,
2 different trip distances, and on-board
voltage. When connected to a temperature
sensor it can also indicate engine- or oil
temperature.These meters are available with
a black or white face, chrome or black
housing, and red or blue dial illumination.
Housings are 48 mm in diameter and have
the switch button installed in the lower cap
the switch button installed in the lower cap.
Meters can also be fitted in our 48 mm
diameter meter caps and brackets when you
re-locate the switch button. Available as
complete kits with black or chrome cap and
bracket, as well as individually.
Complete kits
744181 Chrome cap, black face, red
illumination
744182 Chrome cap, black face, blue
illumination
744183 Chrome cap, white face, red
illumination
744184 Chrome cap, white face, blue
illumination
744185 Black cap, black face, red
illumination
744186 Black cap, black face, blue
illumination
744187 Black cup, white face, red
illumination
744188 Black cap, white face, blue
illumination
Individual parts
710397 Chrome bracket and cap
710369 Black bracket and cap
710309 Micro push button switch
Individual speedo's with chrome
housing and chrome bezel
710389 White face, red illumination
710391 White face, blue illumination
710390 Black face, red illumination
710392 Black face, blue illumination
Individual speedo's with black
housing and black bezel
710393 White face, red illumination
710395 White face, blue illumination
710394 Black face, red illumination
710396 Black face, blue illumination
19
19-059
10300002_ZOD_H19_UK_060
8-9-2010
14:14
Pagina 060
Speedo Accessories & Tachometers
ODYSSEY ROUND DIGITAL MINI
METERS BY DAKOTA DIGITAL
For the Custom builder that wants more than
the average, Dakota Digital developed a
unique and very complete series of precision
digital round instruments. These digital
instruments are available as speedo, tacho,
oil pressure, oil temperature, voltage and
head temperature meter. Speedometers are
available in 3 3/8” (86 mm) as well as in
2 1/16” (52 mm). Tachometers are
3 3/8” (86 mm) diameter. Oil pressure, oil
temperature, voltage and cylinder head
temperature meters are 2 1/16” (52 mm)
diameter and fit most aftermarket mounts.
Sensors must be ordered separately.
19
3 3/8” (86 mm)
Mini
Speedometer
Adjustable speedometer with odometer
reading. A unique alpha numeric read out
is used to display odometer, trip
odometer, service meter, high speed
recall, and 0-60 time. This speedometer
can be driven by the OEM electronic speed
sensor when used in combination with
the Dakota adapter, inductive sensor (for
counting gear tooth) as well as a normal
cable when used with the unique Dakota
pulse generator. Has selectable KM/H or
MPH readout.
731494 Mini digital speedometer with
selectable KM/H or MPH
readout
236383 Transmission or wheel driven
cable to Dakota Digital adapter
236385 Inductive pick up sender
236384 Adapter for use with
OEM sensor
3 3/8" (86 mm)
Digital Mini
tachometer
Displays RPM along with high RPM recall,
shift point set, and hour meter. RPM range
from 0 - 9,990 RPM. Scale reading is
accurate in 10 RPM resolution.
731499 Digital Mini tachometer
2 1/16"
(52 mm) Mini
Speedometers
and Info
Centers
Adjustable speedometer or Info Center
with odometer reading. These can be
driven by the OEM electronic speed sensor
when used in combination with the
Dakota adapter, inductive sensor (for
counting gear tooth) as well as a normal
cable when used with the unique Dakota
pulse generator. Speedometers are
available with 0-250 MPH scale or KM/H
scale. The Info Center is 0-199 MPH or
KM/H selectable and features a bar-graph
tachometer and warning light functions.
Note that the speedometers and Info
Center do not use the sames sensors.
731449 Mini digital speedometer KM/H
731448 Mini digital speedometer MPH
731468 Cable driven pulse generator
731469 Inductive sensor
731470 Adaptor for use with
OEM sensor
236377 Mini digital Info Center
236383 Transmission or wheel driven
cable to Dakota Digital adapter
236385 Inductive pick up sender
236384 Adapter for use with
OEM sensor
19-060
2 1/16"
(52 mm)
Digital Mini
Voltmeter
Reads the system voltage. Scale range
from 8 to 17 Volts with a 0.1 Volt
resolution.
731500 Digital Mini Voltmeter
2 1/16"
(52 mm)
Digital Mini
Oil Pressure
Gauge
Scale range from 0 to 150 PSI with a 1 PSI
resolution. Must be used in combination
with the Dakota Digital pressure sensor.
731501 Digital Mini Oil Pressure Gauge
731475 Oil pressure sensor
2 1/16"
(52 mm)
Digital Mini
Oil
Temperature
Meter
Available in your choice of Fahrenheit or
Celsius reading. Scale range from
0-400° F or 0-200° C in 1° increments.
Must be used with the Dakota Digital oil
temperature sensor.
731497 Digital Mini oil temperature
meter, Celsius or Fahrenheit
731478 Oil temperature sensor
2 1/16"
(52 mm)
Digital Mini
Cylinder Head
Temperature
Meter
Selectable scale ranging from
150-750° Fahrenheit in 4° increments or
65-400° Celsius in 3° increments.
731496 Digital Mini cylinder head
temperature meter
731589
Temperature sensor
10300002_ZOD_H19_UK_061
14-10-2010
16:45
Pagina 061
Speedo Accessories & Tachometers
ODYSSEY DASH MOUNT DIGITAL
MINI METERS BY DAKOTA
DIGITAL
For the Custom builder that wants to install
more than the average meter in a dash or
fairing, Dakota Digital developed a unique
and very complete series of precision
Custom dash mount digital instruments.
These digital instruments are available as
tacho, oil pressure, oil temperature, voltage
and head temperature meter. Sensors must
be separately ordered.
Digital Mini Oil Pressure Gauge
Scale range from 0 to 150 PSI with a 1 PSI
resolution. Must be used in combination
with the Dakota Digital pressure sensor.
731474 Digital mini Oil Pressure Gauge
731475 Oil pressure sensor
Bar-graph Mini tachometer
Displays RPM in the range from
0 - 8,000 RPM in 100 RPM increments.
731471 Bar-graph Mini tachometer
Digital Mini Oil Temperature
Meter
Available in your choice of Fahrenheit or
Celsius reading. Scale range from
0-400° F or 0-200° C in 1s increments.
Must be used with the Dakota Digital oil
temperature sensor.
731476 Digital mini oil temperature
meter, Fahrenheit
731478 Oil temperature sensor
Digital Mini Voltmeter
Reads the system voltage. Scale range
from 8 to 17 volts with a 0.1 Volt
resolution.
731473 Digital mini Voltmeter
Dimensions in millimeters
ZPN 731471 Bar-graph mini tachometer
A = 86 mm, all others A = 68 mm.
All other dimensions are the same for all
meters; B = 47 mm, C = 6 mm, D = 40 mm,
E = 40 mm, F = 79 mm.
19
Digital Mini tachometer
Displays RPM in the range from
0 - 9,990 RPM in 10 RPM increments.
731472 Digital mini tachometer
19-061
10300002_ZOD_H19_UK_62
8-9-2010
15:00
Pagina 062
Speedo & Tachometers
A. Cable driven Mini Speedo
B. Mini Volt meters
C. Mini Digital Clock
D. Mini instrument panel
E. Electronic driven Mini Speedo
MMB'S 48 MM MINI SPEEDO'S, TACHO'S AND GAUGES
Many bike builders put in a lot of effort to give their bike a unique and
personal appearance. Many times they are limited in their choice of
speedo's,tacho's and other handlebar instruments.Today,however,MMB
provides them a variety of mini gauges in various colors.The conservative
builder can continue with his preference of black and white gauges,while
those who want more can choose from, yellow, red, or blue. These mini
gauges have a diameter as little as 48 mm with a top ring of 52 mm.The
housing has a length of 47 mm.Available are cable driven and electronic
driven speedometers in Kilometers per hour as well as Miles per hour,
clocks, volt meters and a mini control panel with 4 control lights. Faces
are available in black, white, red, yellow and blue. These meters feature
all chrome housing and dial illumination.All meters, except the elctronic
speedo's, come complete with chrome mounting bracket.
19
A. Mini Speedo
1:1 ratio Fits transmission driven FL 1968 thru 1980, FXWG
1980 thru 1984, FX 1971 thru 1972
Black
White
710200 710204
710201 710205
Red
710208
710209
Yellow
710212
710213
Blue
710216 KM/H
710217 MPH
2:1 ratio
Fits FL 1947 thru 1967 & 1981 thru 1984, FX(R) 1973 thru
1994 and Sportster 1954 thru 1995
Black
White
Red
Yellow
Blue
710202 710206 710210 710214 710218 KM/H
710203 710207 710211 710215 710219 MPH
B. Mini Volt meters
Black
White
Red
710225 710226 710227
19-062
Yellow
710228
Blue
710229
C. Mini Digital Clock
Features an internal battery to indicate the correct time
Black
White
710237 710238
D. Mini instrument panel
with control light for indicator, neutral, high beam and oil pressure
Black
White
Yellow
Red
Blue
710233 710234 710235 710198 710199
E. Electronic Speedo
Can be used with OEM transmission mounted or the separately
available speed sensor that can be fitted on wheel, hub disc brake rotor
or rear sprocket.. Features LCD display for the read out of time, total
distance, trip distance and analogue read of your speed. All you got
to do is to install two mini switches (like our ZPN 741160) to switch
between the different read outs.
Black
710370
710372
710239
White
710371 KM/H
710373 MPH
Optional speed sensor
Replacement parts
710236 Bulb for dial illumination with socket and wire
10300002_ZOD_H19_UK_63
8-9-2010
15:01
Pagina 063
Speedo Accessories
PETITE 48 MM MINI SPEEDO’S
AND TACHO’S
“Petite” speedo’s and tacho’s are 48 mm
diameter with a top ring of 52 mm, and are
only 47 mm long. Available are 1:1 ratio
speedometers in Kilometers per hour and
electronic tachometers for use with dual fire
ignition.Tachometers can also be used with
Single Fire ignition when used in
combination with our ZPN 232281 tacho
meter adaptor.
160420 Mini Speedo, 1:1 ratio fits
transmission driven FL
1968 thru 1980, FXWG
1980 thru 1984, FX 1971 thru
1972, black face
160428 Electronic Mini Tacho for Dual
fire ignition, 12.000 RPM scale,
black face
CHAMELEON 2 3/8” MINI
SPEEDOMETERS
A simple press of a button allows you to
change the color of lighting in the face of
these speedometers. You can switch from
Red, to Amber, to Blue, to Yellow, to Green,
to White, to Purple and back to Red again.
These speedo’s feature a 2 3/8” (61 mm)
diameter, 2 3/4” (70 mm) long stainless steel
housing with a high luster polished finish,
and a 2 5/8” (67 mm) chrome bezel ring.
Available in 1:1 and 2:1 ratio with MPH or
KM/H scale.
BILLET ALUMINUM HANDLEBAR
METER BRACKETS
These billet aluminum brackets are designed
to mount MMB meters on 1" handlebars,
but can also be used for custom
applications. Come complete with metric
hardware.Available in chrome or black. Sold
each.
Fits 1" handlebars
710337 Chrome
710338 Black
1:1 ratio Fits transmission driven FL
1968 thru 1989, FXWG 1980 thru
1984, and FX 1971 thru 1972.
169260 MPH scale
169261 KMH scale
2:1 ratio Fits FL 1947 thru 1967 &
1981 thru 1984, FX(R) 1973 thru 1994,
and XL 1954 thru 1994
169262 MPH scale
169263 KMH scale
ODOMETER RESET CABLE FOR
HARLEY FX
Complete odometer reset cable assembly
for all 4 Speed FX models (except FXWG)
1973 thru 1984. Includes all necessary parts
and is fully assembled (OEM 67210-73).
110053 Odometer reset cable
19
MINI ELECTRONIC SPEEDO
These electronic speedo’s can be used with
OEM style transmission mounted speed
sensors as used on 1995 to present models.
Speedo’s feature a 2 3/8” (61 mm) diameter,
2 3/4” (70 mm) long polished stainless steel
housing, and a 2 5/8” (67 mm) chrome bezel
ring. Come complete with a universal
mounting bracket, a rubber inserted
handlebar clamp, LED light, digital
odometer, digital trip meter and a push
button switch to switch from odometer to
trip meter or re-setting the trip meter.
Available with up-to 240 km/h black lettered
white face or white lettered black face.
169271 White face
169272 Black face
PETITE VOLTAGE METER
48/SPECCHAR("HARDSPACE"MM
A great match with our mini speedo’s and
tacho’s, is only 48 mm in diameter, 47 mm
long and has a top ring of 52 mm. Housing
is made out of high luster polished stainless
steel. Meter comes pre-wired for ease of
installation.
169239 Mini Voltage meter
RUBBER BOOT FOR SPEEDOMETER CABLE
Made from black flexible rubber, protects
your cable and drive unit from harmful dirt,
dust and moisture. Sold in shop packs of 10.
116041 Speedo cable rubber boot
19-063
10300002_ZOD_H19_UK_64
8-9-2010
15:02
Pagina 064
Speedo, Tacho Cables & Drive Units
ANTIQUE
SPEEDO KNOB
A reproduction of the thin stem
speedometer/odometer reset knob for Big
Twin speedometers. Must be used when
installing a stamped steel two-light, threelight or cat-eye dash, because of the
narrower reset knob opening (10 pack).
169098 Antique speedo
SPEEDO
SOCKET WITH
BULB
Speedo light socket complete with 12 Volt
bulb. Fits all Zodiac speedo’s as well as the
OEM FL style speedo’s (OEM 71151-70).
169062 Speedo light socket
TRANSMISSION DRIVEN SPEEDO
CABLES
Available in black vinyl, braided stainless
steel and Clear Coated braided stainless
steel.
Fits all 1962 thru 1980 FL, 1971 thru
1972 FX and 1980 thru 1983 FXWG. Also
fits 1954 thru 1972 XL when one piece
Fat Bob tank with FL style speedo is
used. Stock length is 35” (89 cm).
Black Vinyl
114030 Stock length
114031 4” longer than stock
114236 6”. longer than stock
114032 12” longer than stock
Braided Stainless Steel
114235 Stock length
CHROME
SPEEDO-METER
KNOB
Long, fits all Softail models from 1990 to
present (OEM 6721589). Short, Fits
FXLR models from 1984 thru 1994
(OEM 67108-83).
116043 Long
116044 Short
19
Clear Coated Braided Stainless
Steel
114932 Stock length
114930 4” longer than stock
114931 12” longer than stock
Fits all transmission driven
Zodiac mini speedo’s, cable is
53” (135 cm) long
114017 Black vinyl
114519 Braided steel
114929 Clear Coated braided Stainless
Steel
SPEEDO-METER
KNOB AND
SCREW
Replacement knob and screw set for large,
dash mounted speedometers as used on FX
1971 thru 1972, FXWG-FXST 1980 thru
1987 and FL 1968 thru 1984.
116042 Speedometer know and screw
REAR WHEEL SPEEDO DRIVE KIT
FOR SOFTAIL
This is the ultimate accessory when you want
to have a clean front end on your pre
1995 Softail. Can also be used on other front
wheel drive models with 16” rear wheel and
tank mounted speedo.This kit eliminates the
need of the front wheel speedo drive and
“Always in the Way” speedo cable running
from the front wheel to the tank mounted
speedo. Our Rear Wheel Speedo Drive Kit
includes a rear wheel speedo drive unit with
chrome plated cover, a 72 1/2" black vinyl
speedo drive cable with 12 mm
speedometer connector, a zinc coated
bushing to replace the front wheel speedo
drive unit and all other required hardware
for a quick and easy do-it-yourself job, fits
Softail models 1986 thru 1995. This kit is
mounted on the left side of the motorcycle.
116045 Complete kit
Optional and replacement parts
114570 Speedo cable, black vinyl
114928 Optional Clear Coated braided
stainless steel speedo cable
116060 Speedo drive unit
301855 Chrome speedo drive unit cover
SPEEDOMETER DRIVE ASSEMBLY
FOR 45 C.I MODELS
A perfect reproduction of the rear wheel
speedometer drive, as used on the 45 C.I.
side valve solo models from 1937 thru 1952.
Has a chrome finish (OEM 67129-37).
116048 Speedo drive gear
19-064
TRANSMISSION DRIVEN SPEEDO
METER DRIVE UNIT
Perfect replica of the OEM transmission
speedometer drive units as used on FL
models from 1969 thru 1980, FX models
from 1970 thru 1972 and FXWG models
from 1980 thru 1983 (OEM 67130-69).
116040 Speedometer drive unit
10300002_ZOD_H19_UK_65
8-9-2010
15:03
Pagina 065
Speedo, Tacho Cables & Drive Units
Braided Stainless Steel
114099 Stock length (OEM 67051-74 &
67024-84 & 67038-84)
114274 4" (10 cm) longer than stock
114277 6" (15 cm) longer than stock
FRONT WHEEL DRIVE SPEEDO
CABLES
Available in black vinyl, braided Stainles
Steel and Clear Coated braided Stainless
Steel.
Fits FX models 1973 thru
1985 (except FXWG/FXST),
FXRS/FXRT 1984 to present,
XLX/XLCH 1973, XLX/XLS
1983 thru 1985 and Evolution
Sportster models 1986 thru 1995.
Stock cable is 38 1/2" (98 cm) long.
Clear Coated Braided Stainless
Steel
114920 Stock length (OEM 67051-74 &
67024-84 & 67038-84)
114921 4" (10 cm) longer than stock
(OEM 67060-79A)
114922 6" (15 cm) longer than stock
114923 8" (20 cm) longer than stock
Fits front wheel drive FL(T)(TC)
1981 thru 1986
Black Vinyl
114033 Standard length (OEM 67026-81)
CHROME SPEEDO DRIVE COVERS
The finishing touch for your front end.
Available to fit virtually every speedometer
drive unit used since 1973, and designed to
clear the Original Equipment black rubber
cable boot.
301857 Fits all Sportster,FX and FXR
models with 35 mm front forks
(except XR 1000) from 1973
thru 1983,4 Speed FL models from
1981 thru 1984 as well as FL(H)T
models from 1982 thru 1986
301856 Fits 1983 XR 1000 as well as all
narrow glide models from 1984
to present
301855 Chrome speedo drive unit cover
Clear Coated braided Stainless
Steel
114927 Standard length
Black vinyl
114003 Stock length, black vinyl
(OEM 67051-73 & 67052-78A)
114155 4" (10 cm) longer than stock
(OEM 67054-83)
114135 6" (15 cm) longer than stock
114001 8" (20 cm) longer than stock
Braided Stainless Steel
114264 Stock length
114269 4" (10 cm) longer than stock
Clear Coated braided Stainless
Steel
114915 Stock length, black vinyl
(OEM 67051-73 & 67052-78A)
114916 4" (10 cm) longer than stock
(OEM 67054-83)
114917 6" (15 cm) longer than stock
114918 8" (20 cm) longer than stock
Fits XLH/XLCH 1974 thru 1983,
XLS 1979 thru 1982, FXWG/FXST
1985 thru 1995, FXR 1982 thru
1983 and all front wheel driven
Zodiac & MMB mini speedo’s.
Stock cable is 38 1/2” (98 cm) long
Black vinyl
114006 Stock length (OEM 67051-74 &
67024-84 & 67038-84)
114147 4" (10 cm) longer than stock
(OEM 67060-79A)
114137 6" (15 cm) longer than stock
114000 8" (20 cm) longer than stock
SPEEDO DRIVE UNITS
Perfect replica of the OEM speedo drive
units.These units work with any of our 2-to1 ratio speedo’s.
116032 Fits FX 1973 thru 1980 and XL
1974 thru 1983 with 19"
Narrow Glide front wheels
(OEM 67127-73)
116036 Fits FXE/FXS 1980 thru
1984 and FXR thru
1984 (OEM 67124-80)
116028 Fits FL models 1981 thru 1984,
FLT/FLHT 1982 thru
1986 (OEM 67073-81)
116030 Fits FXWG/FXST/FXSTC/FLSTF
1984 to present, with 21" front
wheel (OEM 67120-84B)
116034 Fits FXR/FXRS/XL 1984 to
present with 19" Narrow Glide
front
CUSTOM FRONT WHEEL DRIVEN
SPEEDO METER CABLE
This unique front wheel drive speedo cable
allows you to combine any of our large FL
style 2:1 speedometers, including our latest
FL style speedo with built-in tacho. Each
cable comes complete with 2 cable to
speedo head nuts to fit either the large FL
speedo with 5/8" fitting or the 1982 and
later style metal cased FX/XL speedo with
16 mm fitting. Also replaces the OEM cable
on 1984 FXWG and FXST. May be used on
1941 thru 1984 FL models with front wheel
driven speedometers and when our Fat Bob
style tank is installed on the FXR and XL
models. Stock length is 38 1/2" (98 cm).
19
Black Vinyl
114152 Stock length
114246 4" (10 cm) longer than stock
Braided Stainless Steel
114248 Stock length
114242 4" (10 cm) longer than stock
Clear Coated Stainless Steel
114935 Stock length
114934 4" (10 cm) longer than stock
19-065
10300002_ZOD_H19_UK_66
8-9-2010
15:04
Pagina 066
Speedo Accessoiries
ELECTRONIC SPEED SENSORS
Transmission mounted OEM equipment
speed sensor.Available for Sportster and Big
Twin models. Speed sensors will also fit
Zodiac 5 and 6 speed transmissions, all
ECO-line 5 and 6 speed transmissions, as
well as most other aftermarket 5 and
6 speed transmissions, including Right Side
Drive transmissions.
237509 Speed sensor 1996-1999
720179 Speed sensor
744491 Fits Softail 2000 thru 2006 and
FLH/FLT series models 2000
thru 2006 (OEM 74430-00D)
744487 Fits 1995 thru 2004 Sportster
(OEM 74402-95B)
744492 Fits 2005 to present Sportster,
2006 to present Dyna, 2007 to
present Softail and 2007 to
present FLH and FLT series
models (OEM 74402-05)
19
CABLE GUIDE BRACKET
Chrome plated bracket used as a cable guide
for routing clutch or speedo cables on many
Harley models. Also usable as gas line
routing or tie-down/bungee cord bracket.
Sold in 10 pack (OEM 38623-68).
090067 Cable guide bracket
SPEEDO CABLE MOUNTING CLIP
FOR FL-FX
Stainless Steel mounting clip. Used on
transmission driven, dash mounted speedo.
For routing the speedo cable, mounts under
the case stud nut in between the cylinders
(OEM 67075-57A).
114185 Speedo cable mounting clip
CHROME BILLET SPEED SENSOR
COVER
Chrome plated billet aluminum cover to
cover the black plastic speed sensor of the
transmission. Fits 1995 to present
Sportsters, all 1994 thru 1999 Evolution Big
Twins and 1999 to present Twin Cams.
169228 Chrome speed sensor cove
BILLET ALUMINUM SPEEDO
CABLE GUIDE BY PRO-ONE
Don’t let your speedo cable scratch your
paint. Install this billet speedo cable guide
and sleep better at night. Can be used on
any models.
237857 Speedo cable guide chrome
SPEEDOMETER BLOCK OFF KITS
Made by James Gaskets from metal inserted
black neoprene to plug off the speedometer
cable or sensor hole in Big Twin 4 or 5-speed
transmission. Plugs come complete with
stainless steel screw and washer.
231674 Fits all Big Twin 4-speed
transmissions
231675 Fits all Big Twin 5-speed
transmissions
19-066
FAT BUBBA T-BAR METER
BRACKET
Aluminum mounting bracket with show
chrome finish. Features two threaded holes
to fit gauges or other accessories. Fits
applications with 1 1/4” thick T-bars or
1 1/4” thick risers and 3 1/2” center-tocenter distance.
061231 T-Bar gauge mounting bracket
3-LIGHT SPEEDO AND TACHO
MOUNTING BRACKET
Show-chromed top quality mounting bracket
fits FXR 1984 thru 1985, and Sportster and
FX models with 3-light warning lamp
assembly.These deep blue chromed brackets
replace the OEM black finished bracket.
Made from heavy gauge steel and perfectly
formed (OEM 67036-83 & 67110-83T &
67089-85).
169152 Speedo/tacho bracket
4-LIGHT SPEEDO AND TACHO
MOUNTING BRACKET
The same top quality chrome plating and
exacting fit as ZPN 169152, but machined
for 1986 to present models equipped with
the 4-light warning lamp assembly
(OEM 67036-86 & 67161-86 & 67110-86).
169158 Speedo/tacho bracket
10300002_ZOD_H19_UK_67
8-9-2010
15:04
Pagina 067
Speedo Accessoiries
4-LIGHT SOLO SPEEDO BRACKET
Chrome plated gauge bracket for replacing
the black finished OEM bracket on all XL
1983 thru 1994 and FXR 1984 thru
1994 with single instrument. The all steel
bracket wraps over the upper rim of the
instrument reducing glare and adding a
functional, gleaming chrome highlight.
Accepts the late model 4-lite warning lamp
assembly (OEM 67053-86).
301669 Speedo support
MW "DIGITAL SPEEDO" CUSTOM
HANDLEBAR CLAMP & MINI
METER BRACKETS
These unique design, CNC machined billet
aluminum Custom handlebar clampsfeature
a very small lighted digital speedo that can
be switched from KPH into MPH and also
gives trip and time. All kits come with a
electronic wheel sensor and can be
programmed for use with any wheel size by
following the easy to read multi-lingual
instructions. Can also be connected to
transmission mount electric speedo drive
when ZPN 741469 adapter kit is used.These
handlebar clamps are designed for use with
MW meter brackets. Flat meter brackets
fitted in an angle of 40° for excellent
visibility. When you want the meters fitted
flat you can use the 40° angle brackets.
Meter brackets are available to take single
or dual MMB mini meters such as tacho,Volt
meter or mini instrument panel or Auto
Meter tacho's. Handlebar clamps fit 1973 to
present Harley models models with 3 1/2"
(89 mm) center-to-center risers with offset
mounting holes.
710425 Handlebar clamp with digital
speedo and control light holes
710435 Bracket for 40° angled
mounting of dual 48 mm
diameter instruments
710429 Cup with cable hole for 48 mm
diameter cable driven speedo
710436 Cup for MMB or other 48 mm
diameter tacho, clock, Volt
meter or instrument panel
741469 Digital speedo transmission
adapter
Note: All parts are sold separately, not as a
kit.
CHROME DUAL SPEEDO TACHO
VISOR
A chrome plated instrument backing plate
and visor fits all dual handlebar mounted
instruments models 1984 thru 1988 (except
FXLR). Mounts easily beneath the standard
equipment mounting bracket. The visor
provides a better, clear, glare-free
observation of the instruments and warning
lamps. A perfect combination with our 3and 4-light speedo tacho mounting
brackets.
169151 Chrome dual speedo tacho
visor
710424 Handlebar clamp with digital
speedo
710434 Bracket for 40° mounting of a
single 48 mm diameter
instrument
710436 Cup for MMB or other 48 mm
diameter tacho, clock, Volt
meter or instrument panel
741469 Digital speedo transmission
adapter
REPLACEMENT MW DIGITAL
SPEEDO
Replacement digital speedo as used in all
MW billet aluminum Digital Speedo
brackets. Can also be used for custom
applications, using the included electronic
wheel sensor that can be programmed for
use with any wheel size. Easy to read multilingual instructions for the programming are
also included. This digital speedo can also
be used with a ZPN 741469 adapter kit to
connect it to an OEM gearbox speed sensor.
721951 Replacement digital speedo
19
Note: These late gray units do not fit early
MW Digital Speedo brackets that were
supplied with a black digital speedo.
19-067
10300002_ZOD_H19_UK_68
8-9-2010
15:05
Pagina 068
Speedo Accessoiries
MW CUSTOM HANDLEBAR
CLAMP & MINI METER BRACKETS
These MW Custom handlebar clamps are
prepared for the use of MW's meter brackets
for single or dual MMB meters and other
48 mm diameter instruments, or Auto Meter
tacho's. All parts are CNC machined from
billet aluminum and have a high-gloss
polished finish.They fit most 1973 to present
Harley models with 3 1/2" (89 mm) centerto-center risers with offset mounting holes.
Note: All parts are sold separately,not as a kit.
710427 Handlebar clamp with meter
bracket recess and control light
holes
710435 Bracket for 40° angled
mounting of dual 48 mm
diameter instruments
710429 Cup with cable hole for 48 mm
diameter cable driven speedo
710436 Cup for MMB or other 48 mm
diameter tacho, clock, Volt
meter or instrument panel
A. 710430 Bracket for flat mounting of
a single 48 mm diameter
instrument
B. 710434 Bracket for 40° mounting of
a single 48 mm diameter
instrument
A. 710432 Bracket for flat mounting of
an Auto Meter tacho
B. 710433 Bracket for 40° mounting of
an Auto Meter tacho
19
A. 710431 Bracket for flat mounting of
dual 48 mm diameter
instrument
B. 710435 Bracket for 40° angled
mounting of dual 48 mm
diameter instruments
Note: All parts are sold separately, not as
a kit.
710426 Handlebar clamp with meter
bracket recess
710434 Bracket for 40° mounting of a
single 48 mm diameter
instrument
710429 Cup with cable hole for 48 mm
diameter cable driven speedo
19-068
Optional meter cups, must be
used when installing MMB or
other 48 mm diameter
instruments
710429 Cup with cable hole for 48 mm
diameter cable driven speedo
710436 Cup for MMB or other 48 mm
diameter tacho, clock, Volt
meter or instrument panel
741230 Cup for MMB or other 48 mm
diameter electronic speedo,
must be ordered with 2 buttons
of ZPN 370314 for speedo
adjustments
A. 721833 Cup with integrated bracket
for flat mounting of 2 5/8"
Auto Meter or other 67 mm
diameter tacho
B. 721834 Cup with integrated bracket
for 40° angled mounting of
2 5/8" Auto Meter or other
67 mm diameter tacho
10300002_ZOD_H19_UK_69
8-9-2010
15:06
Pagina 069
Speedo Accessoiries
MW CUSTOM HANDLEBAR CLAMP
This MW Custom handlebar clamp is CNC
machined from billet aluminum and has a
high-gloss polished finish. Is pre-bored to
accept stock control lights. Fits most 1973 to
present Harley models with 3 1/2" (89 mm)
center-to-center risers with offset mounting
holes.
710428 Billet aluminum with control
light holes
MW "DIGITAL SPEEDO" CUSTOM
HANDLEBAR CLAMP
These CNC machined aluminum Custom
handlebar clamps feature a very small
lighted digital speedo that can be switched
from KPH into MPH and also gives trip and
time. All kits come with an electronic wheel
sensor and can be programmed for use with
any wheel size by following the easy to read
multi-lingual instructions. Can also be
connected to the stock transmission mount
electronic speed sensors when ZPN
741469 adapter kit is used. Handlebar
clamps fit most 1973 to present Harley
models with 3 1/2" (89 mm) center-tocenter risers with offset mounting holes.
MW 'DIGITAL SPEEDO' CLAMP &
MINI METER BRACKETS
These unique design Custom handlebar
clamps feature a very small lighted digital
speedo that can be switched from KPH into
MPH and also gives trip and time.This digital
speedo can be attached to the gear box
speed sensor when ZPN 741469 adapter kit
is used, or to the included electronic wheel
sensor and can be programmed for use with
any wheel size by following the easy to read
multi-lingual instructions. Clamps are CNC
machined from billet aluminum and have a
high-gloss polished finish. Also available
with a bracket to take our MMB mini meters
such as tacho,Volt meter or mini instrument
panel. These “Digital Speedo” clamps look
even greater when you also fit a pair of MW
squared billet aluminum risers (ZPN
710399 & 721879).
710416 With digital speedo and meter
bracket
710417 With digital speedo, meter
TRANSMISSION MOUNT
ADAPTER FOR DIGITAL SPEEDO'S
This is a very easy to mount adapter for use
on all 1996 to present Big Twin, Sportster,VRod and Buell models with the transmission
mount electronic speedo pick up. It has been
especially developed for use with MW digital
speedometers.
741469 Digital speedo transmission
adapter
19
710422 With digital speedo
710414 With digital speedo
710415 With digital speedo and control
light holes
CHOPS 76 ROCKER BOX
MOUNTED SPEEDO BRACKETS
These Speedo brackets are a perfect Italian
design. Perfectly machined and perfectly
finished they are the finishing touch of your
bike. The brackets bolts straight on to the
rocker boxes of 1995 to present Evolution
Sportster models and take the stock warning
lights and stock 3 1/2" (89 mm) diameter
speedometer. Available in polished or black
anodized billet aluminum.
743432 Polished
743433 Black anodized
710423 With digital speedo and control
light holes
19-069
10300002_ZOD_H19_UK_70
8-9-2010
15:07
Pagina 070
Speedo Accessoiries
ROCKER BOX MOUNTED DIGITAL
LCD LED SPEEDO
Digital instruments and LED technology are
a welcomed part for each custom bike in the
21st century. The LCD speedometer shows
speed, total distance and trip distance in
large digits and also features bright blue LED
illumination. Speedometer is easy
programmable with a 2-switch mechanism.
Comes complete with a billet aluminum
bracket that mounts to the rear rocker box,
and features 3 holes for the OEM control
lights. Also included is a special speed
sensor, but can also be used with
OEM transmission mounted speed sensors
when used in conjunction with our ZPN
741469 speed sensor adapter. These
LCD/LED speedometers are in KM/H and
available with a chrome plated, black, or
polished aluminum bracket to fit on the left
side of your engine for 1984 thru
1999 Evolution Big-Twin models, and
1999 to present Twin-Cam models.
Fits 1984-1999 Evolution BigTwin models
722660 Polished
722661 Chrome
722664 Black
19
Optional parts
741469 Digital speedo transmission
adapter
MW NARROW CLAMP FOR 48
MM SPEEDO CUP
These CNC machined aluminum custom
handlebar clamps accept your choice of cup
and MMB speedo, tacho, clock,Voltmeter or
instrument panel. Clamps are extra narrow
to make them work with risers upto 50 mm
in diameter. Clamps come with a cable
opening, to route the internal handlebar
wiring neatly through the clamp. The clamp
is available in a version with three control
light holes as well as without control light
holes.
741231 Without control light holes
741232 With control light holes
Bracket with digital speedo and
meter cup
721831 For Auto Meter 2 5/8"
721832 For Auto Meter 2 5/8" and
control lights
710418 For Auto Meter 3 3/4"
710419 For Auto Meter 3 3/4" and
control lights
710420 For Auto Meter 5"
Optional
710399 Squared billet aluminum 2 3/8"
high risers
Fits 2000 to present Twin-Cam
models
722662 Polished
722663 Chrome
722637 Black
19-070
MW 'DIGITAL SPEEDO' CLAMP &
AUTOMETER BRACKETS
These unique design Custom handlebar
clamps feature a very small lighted digital
speedo that can be switched from KPH into
MPH and also gives trip and time.This digital
speedo can be attached to the gear box
speed sensor when ZPN 741469 adapter kit
is used.Alternatively the included electronic
wheel sensor can be used.The digital speedo
is programmable for use with any wheel size
by following the easy to read multi-lingual
instructions. Clamps are CNC machined
from billet aluminum and have a high-gloss
polished finish. They are designed to take
Auto Meter 3 3/4” or 5” tacho’s. These
“Digital Speedo” clamps look even greater
when you also fit a pair of MW squared billet
aluminum risers (ZPN 710399).
MW NARROW CLAMP FOR DUAL
48 MM SPEEDO CUPS
These CNC machined aluminum custom
handlebar clamps accept your choice of cups
and MMB speedo, tacho, clock,Voltmeter or
instrument panel. Clamps are extra narrow
to make them work with risers up to 50 mm
in diameter. Clamps come with a cable
opening, to route the internal handlebar
wiring neatly through the clamp. The clamp
is available in a version with three control
light holes as well as without control light
holes.
741233 Without control light holes
741234 With control light holes
10300002_ZOD_H19_UK_071
14-10-2010
17:16
Pagina 071
Speedo Accessoiries
RBS DIGITAL MINI INSTRUMENTS
RBS digital mini speedo's and tacho's are
available with a variety of billet aluminum
mounting brackets. The digital gauge is
2 13/32" (61 mm) in diameter and 2 3/32"
(57 mm) long. These meters feature a LCD
display with blue LED back illumination.The
speedometer shows your choice of speed,
odo or trip meter, the tachometer shows
RPM or ambient temperature.You can select
between these options by use of the 2switch mechanism on the back of the
instrument. Speedo-sensor required
installation materials and instruction
manual are included. Can also be used with
an OEM transmission mount speed sensor
if installed with the separately available
adapter ZPN 741469.
RBS Universal Speedo's and
Tacho's
Easy to mount digital speedo or tacho
with universal bracket. Because of the
single mounting point and 360 degree
rotatable instrument these can be
mounted in any position. The meter
bracket is 4 11/16” (119 mm) long,
2 7/8 (73 mm) wide, total height is
3 19/32” (91 mm). Available in polished,
chrome or black anodized.
Speedo Tacho
733600 722638 Polished
733601 722639 Chrome
733602 722796 Black
RBS Single Straight Handlebar
Instruments
Single speedo or tacho to be mounted
on all 1973 to present models with
3 1/2” (89 mm) center-to-center risers
with offset mounting holes. Straight
bracket is 5 1/2” (140 mm) long,
5 1/8” (130 mm) wide and
3 19/32”(91 mm) deep. Pre-bored to
adapt indicator lights, which are
available separately.
Speedo Tacho
733603 722960 Polished
733604 722961 Chrome
733605 722962 Black
RBS Straight Handlebar
Speedo/Tacho combo
Speedo and tacho integrated in a billet
aluminum bracket that bolts straight on
1973 to present models with 3 1/2"
(89 mm) center-to-center risers with
offset mounting holes. The bracket is
5 1/2" (140 mm) long, 5 11/16"
(144 mm) wide and 3 19/32" (91 mm)
deep. Features indicator light bores.
733609 Polished
733610 Chrome
733611 Black
RBS Single Pullback Handlebar
Instruments
Single speedo or tacho with a 40 degree
angled bracket that fits on all 1973 to
present models with 3 1/2” (89 mm)
center-to-center risers with offset
mounting holes. Bracket is
6 7/32” (158 mm) long and
5 1/8” (130 mm) wide. Pre-bored to
adapt stock style indicator lights.
Speedo Tacho
733606 722963 Polished
733607 722964 Chrome
733608 722965 Black
RBS Angled Dual Pullback
Handlebar Speedo/Tacho combo
Speedo and tacho integrated in a billet
aluminum 40 degree angled bracket
that bolts straight on to all 1973 to
present models with 3 1/2" (89 mm)
center-to-center risers with offset
mounting holes.. Bracket is 6 7/32"
(158 mm) long and 5 11/16" (144 mm)
wide. Indicator lights not included.
733612 Polished
733613 Chrome
733614 Black
19
19-071
10300002_ZOD_H19_UK_72
8-9-2010
15:11
Pagina 072
Speedo Accessoiries
MW BILLET ALUMINUM SPEEDO
BRACKETS FOR T-BARS
These billet aluminum speedo & tacho
brackets are designed to bolt straight on to
any 1" T-bar with stock center to center
distance and take the 48 mm mini MMB
meters. The rubber inserts that are
integrated in the clamping section help to
isolate your instruments from the bike’s
vibrations. No hardware exposed for a clean
Custom look. Available for single or dual
meters and with and without factory idiot
lights and all beautifully high-gloss polished.
710440 Fits single mini meter
710437 Fits single mini meter and
control lights
19
MW BILLET ALUMINUM RISERS
These squared MW risers are CNC machined
from solid blocks of billet aluminum and
have a beautiful polished finish.They slightly
pull back and give a rise of 2 3/8” (60 mm).
710399 Squared billet aluminum 2 3/8"
high risers
INDICATOR LIGHTS
OEM type indicator lights for 5/16" holes.
Oil indicator shows a red lighted oil canister
icon, High Beam a blue high beam icon,
Neutral indicator a green “N”, and turn
signal indicators show a green arrow. The
red pursuit indicator has no icon. Stock
replacement for most models. Will also fit
most aftermarket brackets and handlebar
clamps such as our MW speedo meter
brackets and handlebar clamps. Red and
green lights are also available with no icons
and a chrome trim.
A.High beam indicator light,
blue (OEM 68023-92A)
160902 Headlamp and beam icon, black
trim
710438 Fits dual mini meters
B. Oil indicator light, red
(OEM 68020-92A)
160900 Oil can icon, black trim
162141 Plain, chrome trim
710439 Fits dual mini meters and
control lights
C. Turn signal indicator light,
green (OEM 68021-92A)
160901 Arrow icon, black trim
162139 Plain, chrome trim
D. Neutral indicator light, green
(OEM 68024-92A)
160904 N icon, black trim
162139 Plain, chrome trim
E.Pursuit indicator light, red
(OEM 68022-92A)
160903 Plain, black trim
162141 Plain, chrome trim
19-072
MW PAN AM BILLET RISERS
These Pan Am risers are made from billet
aluminum and have a mirror shine polished
finish. They are only 2 3/8" (60 mm) high
and are a perfect match with MW’s Digital
Speedo clamps. Fits most stock and stock
style triple trees with OEM handlebar
dampers.
721879 MW Pan AM aluminum risers
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising