advertisement
▼
Scroll to page 2
Digital HD Video Camera Recorder HDR-AS15 The following describes the functions provided/changed by this firmware update, and how to operate them. Please refer to the “Operating Guide,” and the “Handbook”. © 2013 Sony Corporation 4-474-006-11(1) Switching Setting G display Copy mode/ Remote control mode / G During smart remote control operation, you can switch to copy mode/remote control mode by operating a smartphone. 1 Turn on the camera and set it to shooting (movie/interval photo recording) mode. 2 Activate the application on your smartphone and connect the smartphone to the camera through Wi-Fi. For details on smartphone settings, refer to “To set the smartphone” in the Handbook. 3 Change the mode of the camera using “PlayMemories Mobile” on the smartphone. Notes • Update “PlayMemories Mobile” to the latest version (Ver. 3.0 or later), before you start the smart remote control function. • You can operate in the following shooting modes. – Movie mode/interval photo recording mode • This function can be started only when the camera is in shooting standby. Menu items changed by this firmware update • [SEND] (Send) is deleted. You can connect the camera through Wi-Fi only in shooting mode. Follow the above steps to connect the camera through Wi-Fi, and switch to copy mode by operating a smartphone. • The default setting of [A.OFF] (Auto Power Off) is changed to [60sec] from [10sec]. • The default setting of [RMOTE] (Remote) is changed to [ON] from [OFF]. Notes • Since the default setting of [RMOTE] is changed to [ON], the power consumption when the camera is not connected through Wi-Fi may increase and result in a shorter shooting time. Setting [RMOTE] to [OFF] is recommended when the camera is not connected through Wi-Fi. • After executing [RESET] (Reset), settings of the camera return to the defaults changed by this firmware upgrade. 2US
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project